VALVE INSPECTION • Inspect the valve after the tire is removed from the rim. • Replace the valve with a new one if the seal A rubber is peeling or has damage. NOTE: If the external appearance of the valve shows no abnormal condition, removing of the valve is not necessary. If the seal has abnormal deformation, replace the valve with a new one.
• Any dust or rust around the valve hole B must be cleaned off. • Then install the valve C in the rim. NOTE: To properly install the valve into the valve hole, apply a special tire lubricant or neutral soapy liquid to the valve. $ Be careful not to damage the lip C of valve.
Published on Jun 12, 2011