Page 163

9-64

CHASSIS

• Inspect the pad mounting pin for bent or damage. If any defects are found, replace the pad mounting pins with the new ones.

• Install the new brake pads. • Install the brake caliper. • Tighten the rear brake caliper mounting bolt to the specified torque. # Rear brake caliper mounting bolt: 39 N·m (3.9 kgf-m, 28.0 lb-ft) NOTE: After replacing the brake pads, pump the brake pedal a few times to check for proper brake operation and then check the brake fluid level.

BRAKE FLUID REPLACEMENT • Remove the right frame head cover and right radiator cover. (!9-6) • Place the motorcycle on a level surface. • Remove the brake fluid reservoir cap 1 and diaphragm. • Drain the old brake fluid as much as possible. • Fill the reservoir with new brake fluid.

Reparatie Manuel M1800R deel 2  
Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement