Page 10

5-66

FI SYSTEM DIAGNOSIS

“C31” (P0705) GP SWITCH CIRCUIT MALFUNCTION DETECTED CONDITION No Gear Position switch voltage Switch voltage is not within the following range. Switch voltage > 0.6 V

POSSIBLE CAUSE • Gear Position switch circuit open or short • Gear Position switch malfunction • ECM malfunction

ECM

Side-stand relay To engine stop switch

BI GP E1

P B/W

1

P

B

Ignition switch

GP switch

N 5

Neutral indicator light

2 4

3 Side-stand switch

INSPECTION Step 1 1) Turn the ignition switch OFF. 2) Remove the right frame side cover. (#9-5) 3) Check the GP switch coupler for loose or poor contacts. If OK, then measure the GP switch voltage.

1

4) 5) 6) 7) 8) 9)

1

Support the motorcycle with a jack. Fold the side-stand to up position. Make sure the engine stop switch is in the “RUN” position. Insert the needle pointed probe to the lead wire coupler. Turn the ignition switch ON. Measure the voltage at the wire side coupler between Pink wire and B/W wire, when shifting the gearshift lever from 1st to Top.

$ GP switch voltage: 0.6 V and more (+ Pink – - B/W) ! 09900-25008: Multi-circuit tester set 09900-25009: Needle pointed probe set & Tester knob indication: Voltage (')

V

Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Reparatie Manuel M1800R deel 2  

Reparatie Manuel M1800R deel 2

Advertisement