__MAIN_TEXT__

Page 1

Timing Chain Tool Set for Mercedes Petrol and Diesel Engines Item. No.: TATHT7023 Thank you for purchasing a our product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.

INSTRUCTION The separating tool and the riveting tool allow a quick, easy and safe splitting, installing and riveting of timing chains - both Simplex and Duplex roller chains as well as the double sleeve-type chains featuring a chain stud Ă˜ of 4 mm that are built-in to Mercedes engines. On these chains, the roller chain plate is pressed-on.

E

K

C

J

F

L

D

M A B P G

H

I

N

O

ID A B C D E F G H I J K L M N O P

Description Link Removal Tool Link Assembly Tool Swaging Jaw for Diesel Engine Swaging Jaw Swaging Jaw for Diesel Engines Swaging Jaw for Diesel Engines Link Removal Pins (*2 per kit) Assembly Link (Temporary) for Diesel/Petrol Engines Assembly Link (Temporary) for Diesel/Petrol Engines Swaging Jaws for Petrol Engines Swaging Jaws for Petrol Engines Swaging Jaw Mandrel, Link Remover for Diesel Engine Threading Link (Temporary) for Diesel/Petrol Engines Threading Link Threading Link (Temporary) for Diesel/Petrol Engines

OEM 602 589 023 300 602 589 003 900 602 589 036 300 112 589 069 300 602 589 026 300 602 589 026 300 112 589 046 301 602 589 026 300 602 589 026 300 103 589 016 300 103 589 016 300 602 589 046 300 602 589 024 000 602 589 024 000

APPLICATION Chrysler/Jeep: 300C (05-11), PT Cruiser (02-09), Grand Cherokee (01-11), Commander (05-11) Mercedes Benz: A-Class (168) (98-05), C-Class (202) (98-01), C-Class (203) (00-08), C-Class (204) (07-13), E-Class (210) (98-03), E-Class (211) (03-10), E-Class (212) (09-13), E-Class Coupe/Cabriolet (207) (09-13), CLS (219) (05-11), CLS (218) (11-13), S-Class (220) (99-06), S-Class (221) (05-13), CLC-Class (203) (08-12), CLK (209) (02-09), GLK (204) (08-12), G-Wagen (463) (00-13) 1.7CDI: 668.940, 68.941, 668.942 2.1CDI: 646.811, 646.812, 646.820, 646.821, 646.951, 646.961, 646.962, 646.963, 646.966 2.2D CDI/CRD: 611.960, 611.961, 611.962 2.7D CDI/CRD: 612.962, 612.961, 612.965, 612.967, 647.961 3.0D CDI/CRD: 642.830, 642.832, 642.834, 642.836, 642.838, 642.850, 642.852, 642.853, 642.854, 642.856, 642.858, 642.862, 642.868, 642.886, 642.910, 642.920, 642.921, 642.922, 642.930, 642.932, 642.960, 642.961, 642.970 3.2D CDI: 613.961, 613.960, 648.960, 648.961 3.9D CDI: 628.960, 628.961 4.0D CDI: 628.962, 629.910, 629.911 WARNING: Please read these instructions carefully. Note the safe operational requirements, warnings and cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and or personal injury and will in validate the warranty. Please keep instructions safe for future use.


Timing Chain Tool Set for Mercedes Petrol and Diesel Engines Item. No.: TATHT7023 Thank you for purchasing a our product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.

Installation and Riveting of Timing Chain 1. Remove Visco fan. Remove timing chain tensioner. 2. Disconnect and partially unscrew all glow plugs. 3. Remove valve cover.

Fig. 4

Installing New Timing Chain Fig. 1

Separating Timing Chain 4. Attach retainer (01, Fig.1) to cylinder head with bolts

as shown (arrows, Fig.1). Cover exposed timing chain case with a clean shop towel. 5. Install (M) (02, Fig.2) along with (G) into (A) (03, Fig.2)

11. Connect new timing chain (5, Fig.5) to the old timing chain (4, Fig.5) using the suitable threading link (04) from Special Tool (N and P). 12. Using a ratchet and socket on the crankshaft, carefully turn engine in direction of rotation, thereby rolling in the new chain (5, Fig.5) onto all the sprockets (in place of the old timing chain) while removing the old chain at the same time.

Fig. 8

18. Press in new timing chain connecting link (3, Fig.8) by turning link assembly tool mandrel (07, Fig.8). 19. Carefully inspect riveted connecting link pins (arrows, Fig.10). If necessary re-rivet pins by repeating step 24 again.

Fig. 9

Fig. 5 Fig. 2 6. Lay above assembled (A) (03) onto the timing chain (Fig.2) and contact the leading link pin. (Fig.3) 7. Using a wrench, turn (M) (02) in towards the timing chain until contact is made with the timing chain link plate. (Fig.2) 8. Continue by turning mandrel (02a) (with (G) (Fig.2) to press out the timing chain leading link pin from the old timing chain. (Fig.3)

13. Disconnect old timing chain (4) from new timing chain (5) when the threading link (04) has reached the top of the camshaft sprocket (Fig.6). Remove and discard old timing chain.

Fig. 6

Fig. 3 9. Unscrew (M) (02) and then remove (A) (03) from old timing chain (Fig.4). The timing chain is now separated. 10. Remove pressed out timing chain link pin (1) from (A) (03) (Fig.4).

14. Connect the two timing chain ends (5, Fig.7) using the assembly link, Special Tool (E & F) (05, Fig.7) and also from the new timing chain insert the new connecting link center link plate (2, Fig.7).

15. Attach swaging jaws (F5 and D9, Fig.8), Special Tool (E & F) into link assembly tool (06). 16. Insert new timing chain connecting link (3, Fig.8) into timing chain ends (5). Observe direction of installation. 17. Lay (B) (06) onto timing chain (5, Fig.8)

20. Remove link assembly tool from timing chain. 21. Attach riveting inserts (D8 and F1) into (B) (06, Fig.9). 22. Insert outer connecting link plate into (B) (06). Outer connecting link plate will be held in place magnetically by (B). 23. Press outer connecting link plate onto timing chain using mandrel. 24. In order to rivet the timing chain connecting link pins, rotate swaging jaw (D8, Fig.9). Then by turning mandrel carefully rivet the timing chain connecting link pins.

Fig. 10

25. Carefully inspect riveted connecting link pins (arrows, Fig.10). If necessary re-rivet pins by repeating step 24 again. 26. Carefully rotate engine by hand to verify camshaft timing. If necessary adjust camshaft timing and injection pump timing. 27. Reinstall timing chain tensioner. 28. Reinstall visco fan. Tighten all glow plugs and reconnect wire harness. Reinstall valve cover.

WARNING: Please read these instructions carefully. Note the safe operational requirements, warnings and cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and or personal injury and will in validate the warranty. Please keep instructions safe for future use.

Profile for Taiwan Auto Tools

TATHT7023 Instruction  

New Mercedes Engine Timing Chain Riveting Tool Set Instruction Manual

TATHT7023 Instruction  

New Mercedes Engine Timing Chain Riveting Tool Set Instruction Manual

Profile for hsieheric
Advertisement