Page 1

922-072 BCM50 Rls. 3.0, BCM200/400 Rls. 4.0 & BCM450 Rls. 1.0 Installation, Configuration & Maintenance

↘

http://www.testsexpert.com/922-072.html


Question: 1 You have installed a DSM32+ MBM in slot 1 of a new BCM450 main unit and you want to connect a set and perform set-based programming. What is the next step? A. Identify the module. B. Deconfigure the module. C. Configure the module. D. Connect a set to the DSM32+.

Answer: D Question: 2 Click on the Exhibit button. While configuring a DTM module on a BCM450, the module was mistakenly identified as a DTMPRI instead of a DTM-T1. What must you do to correct the module identification? A. Select the row of the DTM you configured. Click the Configure button and enter TM-T1?as the module type. B. Select the row of the DTM you configured. Click the Deconfigure button. Click OK. Double-click the ?onfigured Device?column and select ?TM-T1?as the module type. C. Select the row of the DTM you configured. Double-click the ?onfigured Device?column and select ? D. Select the row of the DTM you configured. Click the Disable button. Click OK. E. Select the row of the DTM you configured. Click the Configure button and enter DTM-T1 as the module type. F. Select the row of the DTM you configured. Click theDeconfigure button. Click OK. Double-click the Configured Device column and select DTM-T1 as the module type. G. Select the row of the DTM you configured. Double-click theonfigured Device column and select DTM-T1 as the module type. H. Select the row of the DTM you configured. Click the Disable button. Click OK. Double-click the Configured Device column and select DTM-T1 as the module type.

Answer: B

www.testsexpert.com

2


Question: 3 Which Media Bay Module (MBM) can be combined with the G4x16 on the same DS30 bus on a BCM200/400 system? A. DTM B. GATM4 C. GASM8 D. BRI S/T

Answer: B Question: 4 You need to renumber a group of DNs. You also want to move the voice mailboxes with the renumbered DNs. Which BCM system allows you to do this?

A. The system will configure the IP trunks with a low line number of 001 and a high line number of 32. B. The system will configure the IP trunks with a low line number of 001 and a high line number of 40. C. An error message is displayed since a BCM450 without a CEC can only support eight VoIP trunks. D. An error message is displayed indicating your license is not sufficient to configure 40 VoIP trunks.

Answer: B

www.testsexpert.com

3


Question: 6 You want to install a Digital Trunk Module (DTM) in the BCM450 main unit. How must you set the DIP switches on the DTM? A. Set all of the DIP switches to OFF. B. Set all of the DIP switches to ON. C. Set the first DIP switch to ON and set the rest to OFF. D. Set the first DIP switch to OFF and set the rest to ON.

Answer: B Question: 7 You are creating a set template based on a DN. You clicked the Add button on the Set Templates screen. What must the value in the Source Template field be? A. DN B. DID C. PBX D. None

Answer: D Question: 8 Click on the Exhibit button.

www.testsexpert.com

4


You are configuring a GATM4 on a BCM450. What is the start line number the system will suggest? A. 001 B. 002 C. 011 D. 021 E. 061

Answer: D Question: 9 Which statement about the BCM450 capacity expansion card (CEC) is true? A. A BCM450 with a CEC can support a maximum of 300 trunks. B. You can remove the CEC if the customer capacity needs drop. C. A BCM450 with a CEC can support a maximum of 130 stations. D. The CEC is a standard card that comes installed with every BCM450.

Answer: B Question: 10 What is the maximum number of IP trunks you can have on a BCM450 with a capacity expansion card? A. 48 B. 80 C. 130 D. 300

Answer: C

www.testsexpert.com

5


You will not find better practice material than testsexpert PDf questions with answers on the web because it provides real exams preparation environment. Our practice tests and PDF question, answers are developed by industry leading experts according to the real exam scenario. At the moment we provides only question with detailed answers at affordable cost. You will not find comparative material elsewhere on the web at this price. We offer Cisco, Microsoft, HP, IBM, Adobe, Comptia, Oracle exams training material and many more.

We also provide PDF Training Material for: Cisco CCNA CCNP CCIP CCIE CCVP CCSP CXFF CCENT CCDE

Microsoft MCTS MCSE MCITP MBS MCPD MCAD MCAS MCSA MCDBA

HP AIS APC APS ASE CSA MASE APP CSD CSE

IBM Adobe Comptia Oracle Lotus CS4 A+ 11g DBA WebSphere CS3 Security+ 10g DBA Mastery ACE Server+ OSA 10g SOA CS5 Network+ OCA 9i Storage CS2 Linux+ 11i Rational Captivate iNet+ 9i Forms Tivoli Flex Project+ Weblogic IBM DB2 CSM RFID+ Oracle 8i IBM XML MX7 HTI+ PTADCE

We provide latest exams preparation material only. Contact US at: support@testsexpert.com Join Us at Twitter: www.twitter.com/testsexpert FaceBook: www.facebook.com/testsexpert

www.testsexpert.com

6

BCM50 Rls. 3.0, BCM200400 Rls. 4.0 & BCM450 Rls. 1.0 Installation, Configuration & Maintenance  

/400 Rls. 4.0 & BCM450 Rls. 1.0 Installation, Configuration & Maintenance ↘