Page 1

One Family. One Brand. One Vision.TM

hagerco.com


It’s been more than 160 years since Charles Hager first started working in a blacksmith shop. And in that timespan, we’ve grown from forging wheel rims for Conestoga wagons to offering more than 6,000 door hardware products. Today, the products created by Hager Companies are found all over the world. And for good reason: they’re built to last. At Hager, we are committed to being your one source for full line door hardware. We stand alone as one family and one brand. We create products that make a difference in one community at a time, while being mindful of the one planet we all share. Every product that Hager offers is backed by a 160-year legacy of quality, reputation, and excellence. This condensed catalog is a representation of the many products available. For a complete collection of our products, visit us online at www.hagerco.com or request a complete catalog.


5th and 6th generation


Grade 1 Cylindrical Extra heavy duty commercial, industrial, institutional • • • • • • • • •

Lifetime warranty No exposed mounting screws Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard ASA strike supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

Certifications

US26D

US26

Withnell US10B

US4

• •

UL/cUL Listed for all functions up to 3 hours for “A” labeled doors UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Neutral Pressure Rated

US32D

Apollo

US3

Archer

US10

BHMA Certified ANSI A156.2 Series 4000 Grade 1 ADA Compliant ANSI A117.1 Accessibility Code (levers only) ANSI A250.13 Severe Windstorm Resistant Component August

US3

3400 Series Grade 1 Cylindrical

2

Non-Keyed Functions 10 - Passage 17 - Dummy 40 - Privacy

Keyed Functions 50 - Office 53 - Entry 70 - Classroom 73 - Corridor (levers only) 80 - Storeroom 95 - Intruder Classroom (levers only)

Electrified Options 3480EL - Storeroom, Fail Safe 3480EU - Storeroom, Fail Secure 3480RX - Storeroom, Request to Exit 3480ELRX - Storeroom, Fail Safe with Request to Exit 3480EURX - Storeroom, Fail Secure with Request to Exit


4

3500 Series Grade 2 Cylindrical

Grade 2 Cylindrical Standard duty commercial

• • • • •

Lifetime warranty No exposed mounting screws Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard ASA strike supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

US26

US10B

US10

August US4

Archer

• •

US32D

US3

Apollo

US3

Withnell

Certifications • BHMA Certified ANSI A156.2 Series 4000 Grade 2 • ADA Compliant ANSI A117.1 Accessibility Code (levers only) • ANSI A250.13 Severe Windstorm Resistant Component

US26D

• • • •

Non-Keyed Functions 10 - Passage 17 - Dummy 25 - Exit 27 - Back-to-Back Dummy (levers only) 40 - Privacy

Keyed Functions 50 - Office 53 - Entry 70 - Classroom 73 - Corridor (levers only) 79 - Keyed Communicating 80 - Storeroom

UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Neutral Pressure Rated


5

2500 Series Grade 2 Cylindrical

Grade 2 Cylindrical Standard duty commercial • • • • • • • • •

One-year warranty No exposed mounting screws Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard ASA strike supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

US26D

US10B

US3

Archer

Withnell

Certifications • BHMA Certified ANSI A156.2 Series 4000 Grade 2 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

Non-Keyed Functions 10 - Passage 17 - Dummy 25 - Exit 27 - Back-to-Back Dummy 40 - Privacy

Keyed Functions 50 - Office 53 - Entry 70 - Classroom 80 - Storeroom


Grade 2 Tubular Heavy duty residential - medium duty commercial • • • •

• • • • •

Five-year warranty No exposed mounting screws Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/8” - 2-3/4” (60 mm - 70 mm) adjustable backset standard 1” x 2-1/4” (25 mm x 57 mm) square corner faceplate standard ASA strike supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

Non-Keyed Functions 10 - Passage 17 - Dummy 40 - Privacy

Keyed Functions 53 - Entry 70 - Classroom 80 - Storeroom

US26D

US26

US10B

US10

US4

Archer

August

Withnell

Certifications • BHMA Certified ANSI A156.2 Series 4000 Grade 2 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

US3

3600 Series Grade 2 Tubular

6


Washington University’s Brauer Hall St. Louis | Missouri


8

3700 Series Grade 2 Interconnected

Grade 2 Interconnected Heavy duty residential - medium duty commercial • • • • • • • • •

Lifetime warranty Non-handed Conventional cylinder or Small Format Interchangeable Core housings available (SFIC sold separately) Optional escutcheon included 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard T-strike and square corner strike supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

Interconnected Functions 10 - Interconnected Single Locking Entry 53 - Interconnected Double Locking Entry

US26D

US26

US10B

US10

August US4

Archer US3

Withnell

Certifications • BHMA Certified ANSI A156.12 Grade 2 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated


9

3100 Series Grade 1 Deadlock Grade 1 Deadlock Extra heavy duty commercial

• • • • •

Lifetime warranty Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard Square corner strike with dustbox supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

• • •

US26

US10B

US10

US4

US3

Certifications • BHMA Certified ANSI A156.36 Grade 1 • ANSI A250.13 Severe Windstorm Resistant Component • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors

UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Neutral Pressure Rated ADA - Thumbturn Functions 14 - Double Cylinder 15 - Cylinder x Thumbturn 18 - Classroom

US26D

• • •

3200 Series Grade 2 Deadlock Grade 2 Deadlock Standard duty commercial

• • •

US26D

US10B

US10

US4

US3

Certifications • BHMA Certified ANSI A156.36 Grade 2 • ANSI A250.13 Severe Windstorm Resistant Component • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors

• • •

UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Neutral Pressure Rated ADA - Thumbturn Functions

US32D

• •

Lifetime warranty Non-handed Conventional cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) 2-3/4” (70 mm) backset standard 1-1/8” x 2-1/4” (29 mm x 57 mm) square corner faceplate standard Square corner strike with dustbox supplied standard Other backsets, faceplates, and strikes available Optional keying/keyways available

US32

• • •

14 - 15 - 16 - 20 - 21 -

Double Cylinder Cylinder x Thumbturn Thumbturn w/ Indicator Thumbturn w/ Blank Plate (no cylinder) Thumbturn Only (no cylinder)


10

3800 Series Grade 1 Mortise - Escutcheon and Sectional

Grade 1 Mortise Heavy duty commercial, industrial, institutional • • • • • • • • •

Lifetime warranty Field reversible Concealed thru-bolts Standard mortise cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) Requires mortise cylinder with Schlage L cam 2-3/4” (70 mm) backset only ASA strike supplied standard Additional faceplates and strikes available Optional keying/keyways available

US32D

US26D

US26

William US10B

US10

August US4

Archer US3

Withnell

Certifications • BHMA Certified ANSI A156.13 Series 1000 Grade 1 Operational and Security • ANSI A250.13 Severe Windstorm Resistant (must specify) • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for all functions up to 3 hours for “A” labeled doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

Keyed Without Deadbolt Functions 50 - Office 61 - Apartment Entrance 70 - Classroom 80 - Storeroom 82 - Institution

Keyed with Deadbolt Functions 53 - Entry 56 - Corridor 57 - Classroom Security 81 - Storeroom with Deadbolt

Non-Keyed Without Deadbolt Functions 10 - Passage 40 - Privacy 44 - Privacy with Cointurn 96 - Privacy with Indicator

Non-Keyed Dummy Functions 17 - Single Dummy 27 - Double Dummy

*Available on 3880, 3882, or in combination with 3880EL/3880EU or 3882EL/3882EU.

Electrified Options 3880EL - Storeroom, Fail Safe 3880EU - Storeroom, Fail Secure 3882EL - Institution, Fail Safe 3882EU - Institution, Fail Secure RX - Request to Exit* LM - Latchbolt Monitor* DPM - Door Position Monitor*


11

3800 Series Grade 1 Deadlock

Grade 1 Mortise Deadlock Heavy duty commercial, industrial, institutional • • • • • • • •

Lifetime warranty Concealed thru-bolts Non-handed Standard mortise cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) Requires mortise cylinder with Schlage L cam 2-3/4” (70 mm) backset only ASA no lip strike supplied standard Optional keying/keyways available

Functions 60 - Cylinder x Thumbturn 62 - Double Cylinder 63 - Classroom 64 - Cylinder

US32D

US26D

US26

US10B

US10

US4

US3

Certifications • BHMA Certified ANSI A156.13 Series 1000 Grade 1 Operational and Security • UL/cUL Listed for all functions up to 3 hours for “A” labeled single doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated • ADA - Thumbturn


12

3800 Series Grade 1 Small Case Deadlock

Grade 1 Mortise Small Case Deadlock Heavy duty commercial, industrial, institutional • • • • • • •

Lifetime warranty Non-handed Standard mortise cylinder or Small Format Interchangeable Core housing available (SFIC sold separately) Requires mortise cylinder with Schlage L cam 2-3/4” (70 mm) backset only ASA no lip strike supplied standard Optional keying/keyways available

Functions 30 - Cylinder x Thumbturn 31 - Door Bolt 32 - Double Cylinder 33 - Classroom 34 - Cylinder

US26D

US26

US10B

US10

US4

US3

Certifications • BHMA Certified ANSI A156.5 Grade 1 • UL/cUL Listed for all functions up to 3 hours for “A” labeled doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated • ADA - Thumbturn


13

Cylinders and Keying

Conventional Cylinders and Keys

3901 Rim Cylinder

3902 Mortise Cylinder

3960 Fixed Cylinder Kit Includes two operating keys Finishes include US4 and US26D

3904 Mortise Dummy

3955 Key Blank 5-Pin

3956 Key Blank 6-Pin

3905 Mortise ADA Turn Knob

3961 Cut Key 5-Pin

Small Format Interchangeable Cores, Housings, and Keys

3901 - NCIC Rim Cylinder

3902 - NCIC Mortise Cylinder

3983 Key Blank 6- or 7-Pin

3984 Cut Key 6- or 7-Pin

3981-C Combinated 6-Pin 3981-U Uncombinated 6-Pin

3982-C Combinated 7-Pin 3982-U Uncombinated 7-Pin

3981-Blue 3981-Red Construction Core Combinated 6-Pin

3982-Blue 3982-Red Construction Core Combinated 7-Pin

Includes two key blanks Finishes include US4 and US26D

Includes two key blanks Finishes include US4 and US26D

Includes two operating keys

Includes two operating keys

3962 Cut Key 6-Pin


15

5100 Series Grade 1 Surface Door Closer

Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments Size 1-6 adjustable • • • •

Lifetime warranty Non-handed Heavy duty cast iron Tri-pack (regular, top jamb, and parallel arm mount) standard

5106 Extra Heavy Duty Arm

5107 Hold Open Arm

5108 Extra Heavy Duty Hold Open Arm

5954 Extra Heavy Duty Hold Open Cushion Stop Arm

5955 Extra Heavy Duty Cushion Stop Arm

5961 Extra Heavy Duty Hold Open Stop Arm

US26D

US26

US3

GOL

DBZ

BRZ

ALM

Certifications • BHMA Certified ANSI A156.4 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for up to 3 hours • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

5125 Extra Heavy Duty Stop Arm


16

5200 Series Grade 1 Surface Door Closer

Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments Size 1-6 adjustable • • • •

Lifetime warranty Non-handed Heavy duty aluminum alloy Tri-pack (regular, top jamb, and parallel arm mount) standard

5300 Series Grade 1 Surface Door Closer Grade 1 Heavy Duty Surface Door Closer Ideal for schools, hospitals, and other high-use environments Size 1-6 adjustable • • • •

Lifetime warranty Non-handed Heavy duty aluminum alloy Tri-pack (regular, top jamb, and parallel arm mount) standard

GOL

DBZ

BRZ

ALM

Certifications • BHMA Certified ANSI A156.4 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for up to 3 hours • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

US26D

US26

US3

GOL

DBZ

BRZ

ALM

Certifications • BHMA Certified ANSI A156.4 • ADA Compliant ANSI A117.1 Accessibility Code • UL/cUL Listed for up to 3 hours • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated


17

5400 Series Grade 2 Surface Door Closer

Grade 2 Standard Duty Surface Door Closer Ideal for light duty commercial applications • • • •

Five-year warranty Non-handed Aluminum alloy Tri-pack (regular, top jamb, and parallel arm mount) standard

GOL

DBZ

BRZ

ALM

Certifications • BHMA Certified ANSI A156.4, sizes 2, 3, 4, 5 - must specify • UL/cUL Listed for up to 3 hours • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated

380 Series Electromagnetic Door Holder

Grade 1 Heavy Duty Electromagnetic Door Holder Ideal for hospitals, hotels, schools, and other commercial buildings Hager electromagnetic door holders are designed for virtually any remote door release application and are ideal for holding doors open until released by a remote or switching device. • • • •

One-year warranty Designed for use with self-closing fire and smoke barrier doors Low current draw Fail Safe (when electrical current is interrupted, doors release to close automatically)

380F Flush Mount

380G Floor Mount (single door)

380H Floor Mount (double door)

380R Recessed Mount

380S Surface Mount


Overhead Door Holders and Stops

18

Overhead door holders and stops are utilized to control and protect door assemblies. Hager overhead door holders and stops feature an adjustable arm that narrows down the sizes--making installation seamless and reducing inventory.

7000 Series Grade 1 Heavy Duty Overhead Door Holder and Stop Ideal for hospitals, schools, and other high traffic environments • • • •

Five-year warranty For use on exterior and interior doors Concealed and surface mount available Three functions (Stop, Hold Open, and Friction)

Size

Frame Opening

7000 Series - Grade 1 - Heavy Duty 7000 SZ 1

23” - 39”

7000 SZ 2

39” - 54”

6000 Series Grade 2 Medium Duty Overhead Door Holder and Stop Ideal for office buildings and other medium duty commercial applications • • • •

Five-year warranty For use on exterior and interior doors Concealed and surface mount available Three functions (Stop, Hold Open, and Friction)

Size

Frame Opening

6000 Series - Grade 2 - Medium Duty 6000 SZ 1

18” - 33”

6000 SZ 2

33” - 51”

Functions Function

Description

16 - Stop Only

Shock absorbing spring stops the door

17 - Hold Open

Selective hold open with easy to adjust tension - may be turned on or off and includes the stop only function

15 - Friction

Multi-point friction hold open adjustable for resistance to door movement


The Crash Pad Chattanooga | Tennessee


Grade 1 Exit Device Heavy duty commerical applications • •

Lifetime warranty Non-handed

Rim Exit Device

Certifications • BHMA Certified ANSI A156.3 • UL/cUL Listed for all functions up to 3 hours for “A” labeled doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated • UL305 Listed for panic hardware • ANSI A250.13 Severe Windstorm Resistant Component (Rim and SVR) • Complies with ANSI 117.1 for accessible buildings and facilities

Surface Vertical Rod Exit Device

US4

US10

US26D

US32D

45BE Blank Escutcheon

45CE Cylinder Escutcheon

US10B

US3

Surface Vertical Rod Less Bottom Rod Exit Device

US26

4500 Series Grade 1 Exit Device

20

Concealed Vertical Rod Exit Device

45DT Dummy Trim

Archer Electrified Functions (available on Rim and SVR) AI - Authorized Ingress/Key Monitoring ALK - Alarm Kit DE - Delayed Egress ED - Electric Dogging EDRX - Electric Dogging with Request to Exit EL - Electric Trim - Fail Safe ELR - Electric Latch Retraction

45NL Night Latch

August

45PD Dummy Trim

45PN Night Latch

45PT Thumbpiece

Withnell

ELRX - Electric Latch Retraction with Request to Exit EU - Electric Trim - Fail Secure LM - Latchbolt Monitoring RX - Request to Exit RX2 - Dual Request to Exit RXAI - Request to Exit/Authorized Ingress RXLM - Request to Exit/Latchbolt Monitoring


22

4600 Series Grade 1 Narrow Stile Exit Device Grade 1 Narrow Stile Exit Device Heavy duty commercial applications Lifetime warranty Non-handed

Rim Exit Device

US32D

US26

Concealed Vertical Rod Exit Device

US10B

US10

US4

US3

DBZ

ALM

Certifications • BHMA Certified ANSI A156.3 • UL/cUL Listed for all functions up to 3 hours for “A” labeled doors • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated • UL305 Listed for panic hardware

US26D

• •

ALM and DBZ available for CVR only

46BE Blank Escutcheon

46CE Cylinder Escutcheon

46DT Dummy Trim

Archer

August

Withnell

Electrified Functions (available on Rim) AI - Authorized Ingress/Key Monitoring ALK - Alarm Kit DE - Delayed Egress ED - Electric Dogging EDRX - Electric Dogging with Request to Exit ELR - Electric Latch Retraction

46NL Night Latch

ELRX - Electric Latch Retraction with Request to Exit LM - Latchbolt Monitoring RX - Request to Exit RX2 - Dual Request to Exit RXAI - Request to Exit/Authorized Ingress RXLM - Request to Exit/Latchbolt Monitoring


23

4700 Series Standard Duty Exit Device Standard Duty Exit Device Light commercial and standard duty applications • •

Five-year warranty Handed

Rim Exit Device

Surface Vertical Rod Exit Device

US26D

US3

DBZ

ALM

Certifications • UL/cUL Listed for all functions up to 3 hours for “A” labeled doors (Rim) and 1-1/2 hours (SVR) • UL10C/UBC 7-2 (1997) Positive Pressure Rated • UL10B Neutral Pressure Rated • UL305 Listed for panic hardware • ANSI A250.13 Severe Windstorm Resistant Component (Rim only) • Complies with ANSI 117.1 for accessible buildings and facilities

Apollo

Archer 47BE Blank Escutcheon

47CE Cylinder Escutcheon

47DT Dummy Trim

47NL Night Latch

August

47KD Key in Lever Dummy Trim

47KE Key in Lever Entrance

47KN Key in Lever Night Latch

47KP Key in Lever Passage

47PD Dummy Pull Plate

47PN Night Latch Pull Plate

47RD Raised Lip Pull Dummy

47RN Raised Lip Pull Night Latch

Withnell


4900 Series Removable Mullion

24

Keyed Removable Mullion • • • •

One-year warranty Key removable For use with 4500, 4600, and 4700 Series Rim exit devices UL/cUL/Warnock Hersey listed for fire rated pairs of doors up to 8’ (2438 mm) x 8’ (2438 mm)

4900T

4900TF

Non-Fire Rated Mullion Set

Fire Rated Mullion Set

Certification: Dimensions: Material: Finish:

Certification: Dimensions: Material: FInish:

Non-fire rated 84” (2134 mm), 96” (2438 mm), 120” (3048 mm) 11 gauge steel tube USP

UL fire rated 84” (2134 mm), 96” (2438 mm), 11 gauge steel tube USP

Non-Keyed Removable Mullion • • • •

One-year warranty Non-Key removable For use with 4500, 4600, and 4700 Series Rim exit devices UL/cUL/Warnock Hersey listed for fire rated pairs of doors up to 8’ (2438 mm) x 8’ (2438 mm)

4900U

4900UF

Non-Fire Rated Mullion Set

Fire Rated Mullion Set

Certification: Dimensions: Material: FInish:

Certification: Dimensions: Material: Finish:

Non-fire rated 84” (2134 mm), 96” (2438 mm), 120” (3048 mm) 11 gauge steel tube USP

UL fire rated 84” (2134 mm), 96” (2438 mm), 11 gauge steel tube USP


Lewis County Adventist School Chehalis | Washington


26

Electric Strikes

2925 Low Profile Electric Strike • • • • • • • • • • •

Designed for use with cylindrical lockset with up to 5/8” (15 mm) throw latch bolt Ideal for high traffic installations Quick and easy installation where jamb space is limited ANSI A156.31 compliant Low profile - 1.25” (32 mm) backset Internally mounted solenoid and factory-supplied mounting tabs Reversible Fail Safe - Fail Secure Field selectable voltage, 12/24 VDC Latch status output standard Non-handed, reversible All stainless steel parts with durable diecast body for corrosion resistance

2928 Multi-Application Electric Strike • • • • • • • • • • • •

Centerline electric strike For 5/8” (16 mm) latch or 3/4” (19 mm) latch with 1/8” (3 mm) door gap Ideal for high traffic applications ANSI A156.31, Grade 2 Four (4) interchangeable application faceplates 1/4” (6 mm) horizontal alignment adjustment Plated architectural finishes available Field selectable Fail Secure or Fail Safe Field selectable voltage, 12/24V AC/DC Full monitoring is standard, including latched and unlatched status and keeper closed and deadlocked or unlocked Non-handed All stainless steel parts with durable diecast body for corrosion resistance


27

Electric Strikes

2930 Universal Application Electric Strike • • • • • • • • • • • • • • • • •

Heavy duty electric strike Up to 3/4” (19 mm) latch bolt and 1” deadbolt Retrofits existing ANSI 4-7/8” (124 mm) strike prep - no centerline relocation ANSI/BHMA A156.31 Grade 1 Factory tested 2500 lbs static strength Exceeded 1,000,000 cycles UL tested 1500 lbs static strength 70 ft-lb dynamic strength Internally mounted solenoid, no heat in keeper Field reversible, Fail Safe or Fail Secure Monitoring includes Latchbolt Monitor (LBM), Door Secure Monitor (DSM), and Deadbolt Monitoring (DBM) Dual voltage 12/24 VDC 1/8” (3 mm) horizontal alignment adjustment Tamper resistant Non-handed (deadbolt status handed) All stainless steel corrosion resistant parts and heavy cast body and keeper Faceplate options available for cylindrical and mortise locks applications

Magnetic Locks 2940 Series Magnetic Lock •

• • • • • •

Designed for system integrators, distributors, installers, and building owners presently using low cost import or private label brand access control hardware ANSI/BHMA A156.23 Grade 1 Compliant Full monitoring standard Quick mount assembly reduces installation time Easy to install Full line of mounting brackets and filler plates available Field selectable voltage, 12/24 VDC

2941

600 lb holding force 9-7/8” x 2-7/8” x 1” (250 x 51 x 26 mm)

2942 1200 lb holding force 10-1/2” x 2-7/8” x 1-5/8” (266 x 73 x 41 mm)


Burj Khalifa Dubai | United Arab Emirates


29

Magnetic Lock • • • • • • • • • • • •

Adaptable to virtually any application utilizing top jamb or glass door mounting kits Epoxy-free design provides superior appearance with a plated or anodized finish on all sides Compatible with any access control system ANSI/BHMA A156.23 Grade 1 compliant Modular design Field upgradeable without removing from frame Quick mount assembly Interlocking mounting plate makes it easier to secure wiring and mounting screws Uniform design and installation Indentical housing, template, and accessories Full line of mounting brackets and filler plates available Voltage sensing, 12/24 VDC

2951

Single (1650 lb holding force) 11” x 2-3/4” x 1-9/16” (279 x 70 x 40 mm)

2952 Double (1650 lb holding force) 22” x 2-3/4” x 1-9/16” (558 x 70 x 40 mm)

2953 Single (1200 lb holding force) 11” x 2-3/4” x 1-9/16” (279 x 70 x 40 mm) 2954 Double (1200 lb holding force) 22” x 2-3/4” x 1-9/16” (558 x 70 x 40 mm)

2960 Series Magnetic Shear Lock • • • • • •

Concealed, high security, Fail Safe locking mechanism Ideal for commerical grade hollow metal and wood doors and frames and herculite doors with top rails Incorporates floating armature assembly and special alloy steel locking tabs on both lock and armature assemblies May be adjusted both vertically and laterally to compensate for wide door gaps and warped or misaligned doors Voltage sensing, 12/24 VDC Options include magnetic bond sensor, door position sensor, and herculite top rail armature adjustment bracket

2961

2000 lb holding force 8” x 1-1/2” x 1-5/8” (203 x 38 x 41 mm)

2962 2700 lb holding force 10-7/16” x 1-1/2” x 1-5/8” (265 x 38 x 41 mm)

Magnetic Locks

2950 Series


30

Power Transfers

Power Transfer Heavy duty electric power transfer units provide a concealed and secure means of transferring electric lock and exit device power and signal wires from the frame to the door. When the door is closed, the power transfer unit is completely concealed. They are ideal for heavy traffic and applications requiring higher security to inhibit tampering and abuse. 2-679-0621 2 conductor (18 ga.) Aluminum powder coat

2-679-0623 10 conductor (24 ga.) Aluminum powder coat

2-679-0622 2 conductor (18 ga.) Dark brown powder coat

2-679-0624 10 conductor (24 ga.) Dark brown powder coat

2-679-0620 Concealed Mortise Mount Power Transfer Loop • Frame mortised steel dust box with flexible steel loop

Concealed Electrified Hinges The following options are available on architectural-grade ball bearing and anti-friction bearing hinges. They are available in steel, brass, or stainless materials. Other options are available. EMN

ETW

ETM

Quick Connect available (specify when ordering). Quick Connect wire harness available up to 15 feet.

Monitor Only 3-Knuckle or 5-Knuckle

Through-Wire Only 2-Knuckle, 3-Knuckle or 5-Knuckle

ETW Options: 2, 4, 6, 8, 10, 12 wire available 18, 22, 28 gauge wires available

Through-Wire with Monitoring 3-Knuckle or 5-Knuckle


31

Delayed Egress

2958 Integrated Delayed Egress Lock •

• •

• • • •

Used on exit doors when unauthorized egress is initiated when in the locked mode and delays egress for 15 or 30 seconds Suits applications such as airport and public facility security and safety, loss prevention, wandering patient, and infant protection Fixed 15-second delay or selectable 15- or 30-second exit delay Voice and digital display provides informative annunciation for people without prior knowledge, including the blind and hearing impaired Field selectable voice and tone or tone only Voice provides warning or safety message, countdown, and time of door release Single and tandem models available Additional options include inputs, outputs, and monitoring

Code Compliance: • IBC, International Building Code - 1008.1.8.6 Delayed Egress Locks • IFC, International Fire Code - 1008.1.8.6 Delayed Egress Locks • NFPA 101, Life Safety Code - 7.2.1.6.1 Delayed Egress Lock

• • •

4501 / 4601 DE Delayed Egress with Wall Mount Controller •

• • •

Used on exit doors when unauthorized egress is initiated, delays egress through the door for 15 or 30 seconds Device can be used to stop employee theft, stop retail shoplifting, restrict airport patrons, restrict wandering patients, etc. Device features egress delay, a built-in function keypad, and control inputs Verbal exit instructions or alarm tone only and digital countdown display Wall mount controller sold separately (2-679-0630)

Code Compliance: • FC International Fire Code • IBC International Building Code • NFPA 101 Life Safety Code • NFPA 1 Uniform Fire Code • California Building Code

CBC, California Building Code - 1008.1.8.6 Special Egress Control Devices BOCA, National Building Code - 1017.4.1.2 Special Locking Arrangements Chicago Building Code - 10 (13-160-269) ElectroMagnetic Locking Devices (certificate of approval available)


32

Electrified Products

2972 Exit Switch • 2” (50 mm) illuminated switch button for easy activation • High impact resistant material stands up to abuse • “Push to Exit” sign complies with NFPA requirements • Blue illuminated button is designed for access and egress applications for the disabled

2973 Code Compliant Exit Switch • Code compliant manual releasing devices and sensors • Switch and sensor used together comply with manual releasing device and sensor device requirements for access controlled egress doors • IBC 1008.1.3.4 • NFPA 7.2.1.6.2 • IFC 1008.1.3.4 • California Fire Code

2-679-0611 Black PIR Egress Sensor • Access control system unit that unlocks doors automatically when it detects a person approaching the door • UL Listed 294 • Complies with national fire and building code requirements for access controlled egress doors • Code compliant Fail Safe mode release locks when power to PIR sensor is interrupted

2978 Touchless Exit Switch • Request to exit switch • No-touch wave-to-exit switch with no moving parts • For sanitary entry and exit applications • Can be used to control an automatic door, electric lock, strike, or magnetic lock • DPDT dry contact output • Bi-color status illumination • No moving parts

2977 Piezoelectric Exit Switch • Request to exit switch • Designed for indoor, outdoor, commericial, and industrial egress applications • Can be used to control an automatic door, electric lock, strike, or magnetic lock • Heavy duty vandal resistant and weatherized with no moving parts • Bi-color status illumination

29KS Key Switch • Provides an economical method of providing authorized control for a variety of applications • Several contact configurations to ensure compatibility with virtually any system • Heavy duty, all steel assembly • Tamper resistant


33

Electrified Products

2-679-0650 Emergency Door Release • Ideal for immediate unlocking of doors that are equipped with Fail Safe electric locks and may influence approval of an electric lock system • Built-in alarm may be used as a local door annunciator

2915/2916 Heavy Duty Keypad • Stand alone digital keypad that is designed to control access of a single entry point for facilities with up to 500 users • Each user is assigned a personal identification number (PIN) • Keypad entry of a valid one- to six-digit code activates one or both of the output relays, which releases an electric door lock • 2915 is for indoor use and 2916 is for indoor/outdoor use • Options include door sense input functions and status output functions

4801 Non-Latching Push Bar • Magnetic lock release • Access control Request-to-Exit • Delayed egress trigger • Alarm shunt • CCTV or alarm activation • Features Tri-Failsafe switch, no moving parts, quick and quiet operation, temperature tolerance • No human touch required and sensor calibration not required

2901 Power Supply • Designed to operate exit devices equipped with electric latch retraction • 24 V output 2902 Power Supply • Designed to operate exit devices equipped with electric latch retraction with day/night mode feature • 24 V output 2903 Power Supply • Provides power for Fail Safe or Fail Secure locking devices • 24 V output; 2 AMP capacity • Filtered/regulated

2920 Proximity/PIN Reader • Stand alone access control reader with proximity relay mode • HID compatible • Up to 650 card users • Keypad programmable • Does not require software and computer • 2-679-0021 (25 cards), 2-679-0022 (100 cards), 2-679-0023 (10 key fobs), or 2-679-0024 (100 key fobs) • Weather resistant, two-piece reader enclosure

2904 Power Supply • Provides power and control for openings with an electrified locking device and automatic door operator • 24 V output; 2 AMP capacity • Filtered/regulated 2908 Power Supply • Filtered and regulated for longevity of all system components • 12/24 V output; 1 AMP capacity • Filtered/regulated


Architectural Hinges

34

Full Mortise Hinges - Standard Weight The following full mortise hinges are for use on medium weight doors or doors requiring low or medium frequency service. They can be used with both hollow metal and wood doors. *Available in wide throw

AB700* Steel Concealed Anti-Friction Bearing 3-Knuckle

AB800* Brass or Stainless Concealed Anti-Friction Bearing 3-Knuckle

920 Steel Plain Bearing 2-Knuckle

AB920 Steel Concealed Anti-Friction Bearing 2-Knuckle

1191* Brass or Stainless Plain Bearing 5-Knuckle

BB1191* Brass or Stainless Ball Bearing 5-Knuckle

1279* Steel Plain Bearing 5-Knuckle

BB1279* Steel Ball Bearing 5-Knuckle

Full Mortise Hinges - Heavy Weight The following full mortise hinges are for use on heavy weight doors or doors requiring high frequency service. They can be used with both hollow metal and wood doors. *Available in wide throw

AB750* Steel AB850* Brass or Stainless

AB930 Steel AB933 Brass or Stainless

BB1168* Steel BB1199* Brass or Stainless

Concealed Anti-Friction Bearing 3-Knuckle

Concealed Anti-Friction Bearing 2-Knuckle

Four Ball Bearing 5-Knuckle


36

Architectural Hinges

Half Mortise Hinges - Standard Weight

Half Mortise Hinges - Heavy Weight

The following half mortise hinges are for use on medium weight, hollow metal doors with channel iron frames that require low or medium frequency service.

The following half mortise hinges are for use on heavy weight, hollow metal doors with channel iron frames that require high frequency service.

AB701 Steel AB801 Brass or Stainless

1129 Steel Plain Bearing 5-Knuckle

Concealed AntiFriction Bearing 3-Knuckle

BB1129 Steel BB1109 Brass or Stainless

AB751 Steel AB851 Brass or Stainless

BB1138 Steel BB2098 Brass or Stainless

Ball Bearing 5-Knuckle

Concealed AntiFriction Bearing 3-Knuckle

Four Ball Bearing 5-Knuckle

Full Surface Hinges The following full surface hinges are for use on hollow metal, wood composite, or tubular steel doors with channel iron frames.

AB702 Steel AB802 Brass or Stainless

AB752 Steel AB852 Brass or Stainless

BB2171 Steel BB2110 Brass or Stainless

BB2168 Steel BB2108 Brass or Stainless

BB2169 Steel BB2109 Brass or Stainless

Concealed AntiFriction Bearing 3-Knuckle Standard Weight

Concealed AntiFriction Bearing 3-Knuckle Heavy Weight

Four Ball Bearing 5-Knuckle Standard Weight

Four Ball Bearing 5-Knuckle For Tubular Steel Doors Heavy Weight

Four Ball Bearing 5-Knuckle For Heavy Hollow Metal or Wood Composite Doors Heavy Weight


37

Architectural Hinges

Half Surface Hinges

Spring Hinges

The following half surface hinges are for use on hollow metal or wood composite doors with channel iron frames.

Spring hinges are for automatic closing of the door. They meet codes for hotels, motels, institutions, and commercial buildings.

AB703 Steel AB803 Brass or Stainless

1250 Steel with steel components Square Corner Available with raised barrel for straight or beveled door

1173 Steel Plain Bearing 5-Knuckle Standard Weight

Concealed AntiFriction Bearing 3-Knuckle Standard Weight

BB1173 Steel BB2112 Brass or Stainless Ball Bearing 5-Knuckle Two ball bearings Standard Weight

Swing Clear Hinges

1267 Swing Clear Steel with steel components Square Corner

Architectural Hinge Finishes

US5

US10

US15

US15A

US32D

USP

US4 US10B

Full Mortise Four Ball Bearing 5-Knuckle Heavy Weight

US26D

Steel Full Mortise Ball Bearing 5-Knuckle Standard Weight

BB1266 Steel Full Surface 5-Knuckle Four ball bearings Heavy Weight

US3 BB1262 For square edge doors BB1263 For beveled edge doors

US10A BB1260 For square edge doors BB1261 For beveled edge doors

US26

The following swing clear hinges are for use on hollow metal or wood composite doors with channel iron frames.

Decorative Tips

Flat Button Tip

Tri-Con Flush Pin

Hospital Tip

Fast Riveted Pin

Acorn Tip

Ball Tip

Steeple Tip

Urn Tip


Washington University’s Busch Hall St. Louis | Missouri


39

Residential Hinges

Residential Weight Full Mortise Hinges

RC1641 | 8641 Steel Plain Bearing 6-Knuckle 5/8” Radius

RC1741 | 7741 Steel Plain Bearing 5-Knuckle 1/4” Radius

RC1841 | RC1842 | 8741 Steel Plain Bearing 5-Knuckle 5/8” Radius

RC1641 is Bulk Assembled 8641 is Bulk Unassembled

RC1741 is Bulk Assembled or Boxed Pair 7741 is Bulk Unassembled

RC1841 is Bulk Assembled RC1842 is Boxed Pair 8741 is Bulk Unassembled

Decorative Residential Hinge Pin Tip Kits

1710 Residential Ball Tip Kit Includes two ball tips and one pin

1720 Residential Steeple Tip Kit Includes two steeple tips and one pin

US4

US5

US10A

US26

US26D

USP

US15

US3 US15A

Residential Hinge Finishes


40

Roton Aluminum Continuous Geared Hinges Concealed Leaf Hinges Heavy duty Roton hinges are for high frequency doors or heavy, medium frequency doors.

780-111 HD

780-112 HD

780-224 HD

780-226 HD

Full Surface Hinges Heavy duty Roton hinges are for high frequency doors or heavy, medium frequency doors.

780-057 HD

780-157 HD

780-210 HD

780-257 HD

Half Surface Hinges Heavy duty Roton hinges are for high frequency doors or heavy, medium frequency doors.

780-053 HD

780-046 HD

780-054 HD

780-300 HD

DBZ

CLR

Roton Hinge Finishes

Notes • Aluminum 6063-T6 • You MUST specify UL when ordering hinges for the UL stamp • Dutch door, hospital tips, custom hole patterns, and special finishes are available on Roton hinges Electrical Hinge Modifications • Exposed Electric Contact (E) • Exposed Electric Switch (E1S) • Electric Power Transfer Preparation (EPT) • Removable Electric Through-Wire (RETW) • Concealed Electric Through-Wire (ETW) • Concealed Electric Monitoring (EMN) • Concealed Electric Through-Wire and Monitoring (ETM)


41

Stainless Steel Continuous Hinges Hager heavy duty stainless steel continuous hinges offer proven reliability that can stand up to the daily rigors of high traffic, high impact areas. The hinges are designed and engineered to evenly distribute door weight along the full length of the door, which eliminates localized stress of the door frame. The following hinges are for doors 1-3/4” (44 mm) thick and up to 600 pounds.

Concealed Leaf For door edge protection lips

790-900

790-905

790-907 Flush Mount

790-911 Swing Clear

790-915

Half Mortise

Half Surface

Full Surface

For retrofit applications and for square edge doors only

For security moldings

For ADA upgrade work

790-904

790-903

790-906

790-935 Swing Clear

790-909 Swing Clear

US32D

Stainless Steel Continuous Hinge Finish

Notes • 14 gauge Type 304 stainless steel • 1/4” (6.4 mm) diameter stainless steel pin • Dual 6/6 Nylon bearings between each knuckle • Dutch door, hospital tips, custom hole patterns, and special finishes are available on stainless steel continuous hinges Electrical Hinge Modifications - check website for model availability • Exposed Electric Switch (E1S) • Electric Power Transfer Preparation (EPT) • Concealed Electric Through-Wire (ETW)


43

Trim & Auxiliary

Push/Pull

P4E, T4E Security Pull

3, 4, 5 Round Pull

11, 12, 23 Round Offset Pull

20N Cast Pull

22N Edge Pull for Sliding Doors

125S, 126S, 127S Bent Push Bar

26N Security Finger Pull

926P Curve Shaped Pull

961P Steeple Tip Pull

153B-D-V (10” CTC) 154B-D-V (12” CTC) 155B-D-V (18” CTC) Push/Pull Set

159B-D-V (10” CTC) 160B-D-V (12” CTC) 161B-D-V (18” CTC) Offset Push/Pull Set

170D Push/Pull Set

30, 40, 50 Series 0.050” (1.3 mm) gauge A30, A40, A50 Series 0.062” (1.6 mm) gauge Pull Plate

30S, 40R, 50T 0.050” (1.3 mm) gauge A30S, A40R, A50T 0.062” (1.6 mm) gauge Push Plate

25P Security Finger Push/Pull Plate Set

121L Cylinder Pull Beveled Lip Projection Cylinder cutout 1/4” (6.4 mm) diameter

122L Security Push/Pull Plate Set Beveled Lip Projection


Trim & Auxiliary

44

Protection Plates Door protection plates are available with beveling and counter sunk holes. 190S, 198S, and 225S protection plates are available with UL rating for US32 and US32D only. 190S | 193S | 194S 0.050” (1.3 mm) gauge Aluminum, brass, bronze, stainless steel

214S 0.125” (3.2 mm) gauge Plastic laminate

198S 0.038” (0.8 mm) gauge Stainless steel

220S | 223S | 224S 0.062” (1.6 mm) gauge Aluminum, brass, bronze, stainless steel

199B 0.038” (0.8 mm) gauge Bright gold anodized

225S 0.060” (1.9 mm) gauge Kydex®

204S 0.125” (3.2 mm) gauge Clear plastic

Stops and Holders

230W, 232W Convex Wall Stop

234W, 236W Concave Wall Stop

254W Manual Wall Stop and Holder

326W Automatic Wall Stop and Holder

242F Universal Dome Stop

244F Cast Floor Stop

252F Cast Floor Stop

269T Heavy Duty Floor Stop


Center for Design Research Lawrence | Kansas


46

Trim & Auxiliary

Accessories

957P Coat Hook

951P Double Coat Hook - Straight

1755 | 1756 160° and 200° One Way Door Viewer

301D Heavy Duty Hinge Pin Stop For use with NRP hinges only

303W Handrail Bracket

307D Door Silencer for Metal Frames

1758 | 1759 160° and 200° Door Viewer with Privacy Flap

300D Chain Door Check

Surface Bolts and Coordinators

275D 8” (203 mm) Surface Bolt

278D 6” (152 mm) Surface Bolt

279D 4” (102 mm) Dutch Door Bolt

297D Coordinator with Filler Bar

298D Gravity Coordinator

Signage Hager signage meets ANSI A156.16 for L03201.

Engraved Plastic Signage 0.125” (3.2 mm) thick plastic with 3/4” Helvetica lettering. ADA Tactile Signage Includes Grade 2 Braille translation conforming to Section 4.30 requirements


47

Trim & Auxiliary Flush Bolts

280X Dust Proof Strike

281D Slide Flushbolt

282D Manual Flushbolt for Metal Doors

294D Self Latching Flushbolt Set for Wood Doors

295M Automatic Flushbolt with Fire Bolt Set for Metal Doors

296W Automatic Flushbolt Set for Wood Doors

291D Automatic Flushbolt Set for Wood Covered Composite Doors

293D Self Latching Flushbolt Set for Metal Doors

336L Hinge Filler Plate Frame

337A Template Hinge Shim

Filler Plates and Shims Size configurations are available to meet most applications.

336A Door Edge Filler Plate - 161 Prep

336B Door Edge Filler Plate - 86 Prep

336D Door Face Filler Plate - 161 Prep


Taipei 101 Taipei | Tawain


49

Trim & Auxiliary

Latches and Latch Protection Plates

274D Door Guard

311H Push/Pull Latch

318D Roller Latch with Tee Strike

321R Adjustable Ball Catch with Strike

330L Privacy Pocket Door Latch

341D Latch Protector Plate with Lock Cut Out

345D Latch Protector Plate

1442 Roller Latch with Full Lip Strike

Door Edgings and Corner Guards

180H-K-M-P-Q Mortise Type

181H-K-M-P-Q Overlap Type

182H-K-M-P-Q Surface Type

Hager door edgings meet ANSI A156.6 Door Edging Type J201 through J212. Hinge and latch cutouts are available. Standard edge guards are 0.045” - 0.050” thick and are made for 1-3/4” +0, -1/32” door thickness.

185G Corner Guard Size: 3” x 3” x 40” Thickness: .050” Meets ANSI A156.6 for J210


50

Thresholds & Weatherstripping REV.

DESCRIPTION

REV.

ECO NO.

DESCRIPTION

ECO NO.

DATE

DATE

Saddle Thresholds

Half Saddle Thresholds

To effectively seal out the elements, use saddle thresholds in conjunction with a door bottom, sweep, shoe, or bumper strip. REV.

DESCRIPTION

ECO NO.

DATE

1/2" 12.7

REV.

DESCRIPTION

1/2" Step 12.7

ECO NO.

REV.

1/1/2008

ENG. APPR.

-

-

412S -

SIZE

A

HAGER RESERVES

PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

DESCRIPTION

ECO NO.

DATE

1/2" STEP 12.2

5" 127 -

407S

5 1/2" 139.7

DATE

1/2" 12.7

DRAWN

DATE

3/4" 19.1

410S

HAGER RESERVES PROPRIETARY & CONFIDENTIAL THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE 6063-T6 WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

ECO NO.

1/4" 6.4

4" 101.6

REV.

DESCRIPTION

DWG. NO.

REV.

THE RIGHT TO 5" DESIGN MAKE CHANGES 127 WITHOUT NOTICE.

MATERIAL

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

431S

Q.A.

6063-T6

CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

A

REV.

407s

SCALE:1:1

WEIGHT: 0.31

SHEET 1 OF 1

410s

SCALE:1:1

WEIGHT: 0.24

SHEET 1 OF 1

1/4" 6.4

1/4" 6.4

1/2" 12.7

5" 127

PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

413S

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH REV. 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

PROPRIETARY & CONFIDENTIAL

Q.A.

TOLERANCES: FRACTIONAL:DESCRIPTION 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

ECO NO.

DWG. NO.

DATE REV.

412s

SCALE:1:1

WEIGHT: 0.31

SHEET 1 OF 1

Thermal Barrier Saddle Thresholds High strength thermal barrier is permanently bonded in place to block the transfer of heat or cold. To provide a seal, use in conjunction with a door bottom, sweep, shoe, or bumper strip. Other widths available. PROPRIETARY & CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

SHEET 1 OF 1

1/2" [12.7]

ECO NO.

REV.

DESCRIPTION DRAWN

-

1/1/2008

ENG. APPR.

-

-

ECO NO.

DRAWN ENG. APPR. Q.A.

A

DWG. NO.

REV.

WEIGHT: 0.38

1/8" [3.2]

-

1/1/2008

ENG. APPR.

-

-

DWG. NO.

SCALE:1:1

REV.

438S

SCALE:1:1

WEIGHT: 0.26

SHEET 1 OF 1

ECO NO.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

DATE

1/2" 12.7

443S -

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

REV.

442s

SCALE:1:1

WEIGHT: 0.10

SHEET 1 OF 1

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

477S

444S

12" 304.8 HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

-

A

DATE

DWG. NO.

DESCRIPTION

SIZE

A

DWG. NO.

SCALE:1:1

REV.

443s WEIGHT: 0.30

SHEET 1 OF 1

1/2 scale

Q.A.

SIZE

A

1/4" 6.4

PROPRIETARY & CONFIDENTIAL

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

SHEET 1 OF 1

1/2" [12.7]

DRAWN

ECO NO.

421s

SCALE:1:1

1/2" STEP 12.8

5" [127]

-

1/2" STEP

-

SIZE

1/1/2008

-

442S

12.7 HAGER RESERVES PROPRIETARY & CONFIDENTIAL THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. 6" CALL HAGER PROPERTY OF HAGER 152.4 COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

-

DESCRIPTION

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

1/4" 6.4

DATE

435S

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

SHEET 1 OF 1

DATE

3 1/8" [79.2]

PROPRIETARY & CONFIDENTIAL

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. REV. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

6" [152.4]

Bumper thresholds are for use with outswinging doors in order to seal out the elements.

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

DATE REV.

A

REV.

1" [25.4]

ECO NO.

Ramp thresholds provide a 1:12 slope in order to meet Americans with Disabilities Act (ADA) requirements.

REV.

WEIGHT: 0.25

Bumper Thresholds

HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE 6063-T6 WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

-

ADA Ramp Thresholds

413s

SCALE:1:1

DESCRIPTION

PROPRIETARY & CONFIDENTIAL

1/1/2008

-

ENG. APPR. MATERIAL CHANGES REV.Q.A. DESCRIPTION 6063-T6 WITHOUT NOTICE. CALL HAGER TOLERANCES: ENGINEERING AT FINISH FRACTIONAL: 0.015" SIZE DWG. NO. 1-800-325-9995 ANGULAR: MACH: 1 BEND: 1 FOR THE LATEST 431s TWO PLACE DECIMAL: 0.01" REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE. SCALE:1:1 WEIGHT: 0.40 THREE PLACE DECIMAL: 0.004"

421S REV.

438S

1/4" STEP 6.4 DRAWN

5HAGER 1/2"RESERVES THE RIGHT TO MAKE DESIGN 139.7

Q.A.

1/2" 12.7 5" 127

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

REV.

435S WEIGHT: 0.16

SHEET 1 OF 1

PROPRIETARY & CONFIDENTIAL

HAGER RESERVES THE RIGHT TO

DRAWN

-

1/1/2008

-


51

Thresholds & Weatherstripping REV.

DESCRIPTION

ECO NO.

REV.

DATE

DESCRIPTION

ECO NO.

Residential Thresholds

Interlocking Thresholds

Residential thresholds are available with Sure Step速 Non-Slip Abrasive Coating.

Interlocking thresholds interlock with a hook on the bottom of the door for a superior seal against wind and rain.

DATE

1 7/16" [36.3]

1/4" [6.4]

1/2" [12.7]

1/2" [12.7]

604S

400S 5" [127]

3 1/2" [88.9]

REV. REV.

DESCRIPTION

ECO NO.

DESCRIPTION

ECO NO.

DATE

DATE

Cover Plate Assembly Thresholds Cover plate assembly thresholds are used with floor closers (center or offset hung) and in a single or double door application. -

Panic Thresholds Panic thresholds are for use in conjunction with surface applied vertical rod exit devices. PROPRIETARY & CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

PROPRIETARY & CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

REV.

SIZE

A

DWG. NO.

REV.

400S

SCALE:1:1

WEIGHT: 0.24

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

A

DESCRIPTION

ECO NO.

WEIGHT: 0.28

DATE

651S

REV. REV.

DESCRIPTION

1" 25.4

ECO NO.

5/8" 15.9 HAGER RESERVES PROPRIETARY & CONFIDENTIAL THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

5" 127

DRAWN

-

1/1/2008

ENG. APPR.

-

-

532S SIZE

A

PROPRIETARY & CONFIDENTIAL

-

DWG. NO.

REV.

520S

SCALE:1:1

DESCRIPTION

ECO NO.

DATE

DATE

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SHEET 1 OF 1

1/2" x 7" [12.7 x 177.8]

520S

5" [127]

REV.

604s

SCALE:1:1

SHEET 1 OF 1

1/4" [6.4]

1/2" [12.7]

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

WEIGHT: 0.11

SHEET 1 OF 1

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

1/2" x 5" [12.7 x 127]

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

REV.

651s

SCALE:1:4

WEIGHT: 1.94

SHEET 1 OF 1

652S

7/8" 22.2

1/2" 12.7 PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

5" 127

REV.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

541S

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

REV. SIZE

A

DWG. NO.

DESCRIPTION

ECO NO.

DATE

REV.

532S

SCALE:1:1

DESCRIPTION

WEIGHT: 0.13

ECO NO.

SHEET 1 OF 1

DATE

Thermal Barrier Panic Thresholds These thresholds are for latching panic devices that have a thermal barrier permanently bonded in place to effectively block the transfer of heat or cold. They are-used in conjunction with surface applied vertical rod exit A 541S devices. HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. PROPRIETARY & CONFIDENTIAL

7/8" [22.2]

DRAWN

-

1/1/2008

ENG. APPR.

-

-

PROPRIETARY & CONFIDENTIAL

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

SCALE:1:1

WEIGHT: 0.12

REV. SHEET 1 OF 1

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES 6063-T6 WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

SCALE:1:4

1/2" x 7" x 4" [12.7 x 177.8 x 101.6]

REV.

652S WEIGHT: 1.81

SHEET 1 OF 1

655S

1/2" [12.7]

4 1/8" [104.8]

515S

PROPRIETARY & CONFIDENTIAL

HAGER RESERVES THE RIGHT TO MAKE DESIGN

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-


REV.

DESCRIPTION

ECO NO.

REV.

52

Thresholds & Weatherstripping

REV.

Abrasive Cast Aluminum Thresholds

ECO

DESCRIPTION

ECO NO.

Interlocking/Overhead Drip Guards

Abrasive cast, heavy duty aluminum thresholds have silicon carbide granules integrally cast into the surface. They are ideal for high traffic areas where maximum durability is required. The abrasive, skid resistant surface works well under wet, dry, or oily conditions. REV.

DATE

DESCRIPTION

DESCRIPTION

ECO NO.

DATE

717S 717S 1 1/8" [28]

DESCRIPTION

3/4" [19.1]

3/4" [19.1]

717S

HEAD

DOOR 1/4" [6.4]

REV.

3/4" [19.1]

3/8" 9.5

HEAD

5/8" [15.9]

1 1/8" [28]

ECO NO.

DATE

DOOR 718S

718S

718S

UBC 7.2 1997 PART 1

UBC 7.2 1997 PART 1

19/32" [15.1]

4" [101.6], 5" [127], 6" [152.4]

REV.

DESCRIPTION

ECO NO.

DATE

DRAWN 1/1/2008 HAGER RESERVES THE RIGHT TO ENG. APPR. MAKE DESIGN DRAWN THE INFORMATION CONTAINED MATERIAL 1/1/2008 HAGER RESERVES Q.A. CHANGES PROPRIETARY & CONFIDENTIAL THE RIGHT TO IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. ENG. APPR. MAKE DESIGN CALL HAGER PROPERTY OF HAGER TOLERANCES: DRAWN THE INFORMATIONAT CONTAINED MATERIAL 1/1/2008 RESERVES FINISH HAGER CHANGES ENGINEERING Q.A. COMPANIES. ANY REPRODUCTION FRACTIONAL: 0.015" PROPRIETARY CONFIDENTIAL SIZE DWG. NO. REV. IN 1-800-325-9995 THIS & DRAWING IS THE SOLE THE RIGHT - TO NOTICE. Material <not specified> WITHOUT ENG.1APPR. INPART OR AS A WHOLE WITHOUT FOR THE LATEST ANGULAR: MACH: 1 BEND: MAKECALL DESIGN HAGER PROPERTY OF HAGER TOLERANCES: 717S CONTAINED THE WRITTEN PERMISSION OFTHE INFORMATION TWO PLACE DECIMAL: 0.01" CHANGES ENGINEERINGMATERIAL AT FINISH REVISION DATE Q.A. FRACTIONAL: 0.015" COMPANIES. ANY REPRODUCTION SCALE DRAWING Material <not specified> SIZE DWG.SHEET NO. 1 OF 1 IN THIS DRAWING IS THE SOLE DO NOT WITHOUT NOTICE. HAGER COMPANIES IS PROHIBITED. 1-800-325-9995 OF TEMPLATE. SCALE:1:1 WEIGHT: 0.05 THREE PLACE DECIMAL: 0.004" INPART OR AS A WHOLE WITHOUT ANGULAR: MACH: 1 BEND: 1 CALL HAGER FOR THE LATEST PROPERTY OF HAGER TOLERANCES: 717S THE WRITTEN PERMISSION OF ENGINEERING TWO PLACE DECIMAL: 0.01" FINISH REVISIONAT DATE COMPANIES. ANY REPRODUCTION FRACTIONAL: 0.015" UBC DO NOT SIZE DWG. NO. - SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. SCALE:1:1 WEIGHT: 0.05 THREE PLACE DECIMAL: 0.004" 7.2 1-800-325-9995 INPART OR AS A WHOLE WITHOUT ANGULAR: MACH: 1 BEND: 1 1997 FOR THE LATEST 718S THE WRITTEN PERMISSION OF PART 1REVISION DATE TWO PLACE DECIMAL: 0.01" DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. SCALE:1:1 WEIGHT: 0.05 THREE PLACE DECIMAL: 0.004"

PROPRIETARY & CONFIDENTIAL

626S REV.

Cover Plates

DESCRIPTION

ECO NO.

1-3/8" [35]

DATE

HAGER RESERVES PROPRIETARY & CONFIDENTIAL THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST REV. DESCRIPTION THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 ECO NO. TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

626S WEIGHT: 0.29

SHEET 1 OF 1

HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

2 1/2" [63.5]

DOOR

PROPRIETARY & CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

1/4"

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

3/4" 19.1

7/8" 22.2

DRAWN

-

1/1/2008

ENG. APPR.

-

-

SIZE

WEIGHT: 0.05

ECO NO.

A

DWG. NO.

SHEET 1 OF 1

DATE

-

DESCRIPTION

REV.

-

DESCRIP

TOLERANCES:

SIZE DWG. NO. DESCRIPTION

BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

ECO NO.

770S

WEIGHT: 0.06

DRAWN

-

1/1/2008

ENG. APPR.

-

-

SHEET 1 OF 1

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

DESCRIPTION

SIZE

A

DWG. NO.

ECO NO.

DATE

REV.

810S

SCALE:1:1

WEIGHT: 0.11

1/4" [4.6]

SHEET 1 OF 1

REV.

UBC 7.2 1997 PART 1 PART 2

REV.

UBC 7.2 1997 PART 1 PART 2

REV.

DESCRIPTION

DESCRIPT

ECO NO.

WEIGHT: 0.10

1/16" [1.6]

SHEET 1 OF 1

756S

ECO NO.

720

1/2" [12.7]

DATE

726

1/2" [12.7]

DATE

1/4" [6.4] UBC

HAGER 7.2 RESERVES 1997 PROPRIETARY & CONFIDENTIAL THE RIGHT TO PART 1 PART 2 MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER ENGINEERING AT FINISH DRAWN 1/1/2008 HAGER RESERVES COMPANIES. ANY REPRODUCTION 1-800-325-9995 PROPRIETARY & CONFIDENTIAL THE RIGHT TO INPART OR AS A WHOLE ENG.WITHOUT APPR. FOR - THE LATEST MAKE DESIGN THE WRITTEN PERMISSION OF REVISION DATE THE INFORMATION CONTAINED MATERIAL CHANGES DO NOT SCALE DRAWING Q.A. HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER TOLERANCES: COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH FRACTIONAL: 0.015" SIZE DWG. NO. 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST ANGULAR: MACH: 1 BEND: 1 719 THE WRITTEN PERMISSION OF TWO PLACE DECIMAL: 0.01" REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. SCALE:1:1 WEIGHT: 0.01 THREE PLACE DECIMAL: 0.004"

2" 50.8

3/8" [9.5] A

721

1/2" [12.7]

1/4" [7]

736

DRAWN

-

ENG. APPR.

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 TWO PLACE DECIMAL: THREE PLACE DECIMAL REV. SHEET 1 OF 1

3/16" [4.8]

1/2" [12.7]

835S

#10 x1"

DESC

722

11/16" [17.4]

UBC 7.2 1997 PART 1 PART 2

HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER UBC ANY REPRODUCTION ENGINEERING AT FINISH COMPANIES. 7.2AS A WHOLE WITHOUT 1-800-325-9995 INPART OR FOR THE LATEST 1997 THE WRITTEN OF REVISION DATE PART PERMISSION 1 DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

DATE

REV.

A

SCALE:1:1

1/2" [12.7]

677s

SCALE:1:1

UBC 7.2 1997 PART 1

REV.

UBC 7.2 1997 PART 1 PART 2

1/8" 3.2

-

Q.A.

719

7/16" [11.7]

1/4" [6.7]

1/8" 3.2

PROPRIETARY & CONFIDENTIAL

REV.

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

REV.

ENG. APPR.

REV.

676s

SCALE:1:1

DESCRIPTION

Astragals and meeting stiles are fire rated and should only be mounted on pairs of doors with a gap that meets NFPA 80 2-3.1.7.

HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

1/1/2008

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

3/8" [9.4]

Q.A.

Astragals/Meeting Stiles PROPRIETARY & CONFIDENTIAL

-

Press-On Weatherstripping

[6.4]

REV.

DRAWN

FRACTIONAL: 0.015" REV. ANGULAR: MACH: 1

677S HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

810S

HEAD PROPRIETARY & CONFIDENTIAL

[3.2]

3" -24" [76 - 610]

1 1/2" [38.1]

REV.

A DATE

SCALE:1:1

1/8"

3" - 24" [76 - 610]

1/8" 3.2

A

Q.A.

676S

PROPRIETARY & CONFIDENTIAL

A

A

Cover plates are used primarily to cover expansion joints and for situations requiring extra width or strength. Manufacturered from solid, cold rolled aluminum for extra durability.

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

770S

DRAWN

PROPRIETARY & CONFIDENTIAL

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

DRAWN 1/1/2008 HAGER 7.2 RESERVES 7.2 1997 1997 THE PART RIGHT 1 TO 1 ENG. APPR. -PART PART 2 PART 2 MAKE DESIGN MATERIAL CHANGES Q.A. Material <not specified> WITHOUT NOTICE. CALL HAGER TOLERANCES: DRAWN ENGINEERING AT FINISH HAGER RESERVES FRACTIONAL: 0.015" SIZE DWG. NO. REV. 1-800-325-9995 PROPRIETARY & CONFIDENTIAL ANGULAR: MACH: 1 BEND: THE 1 RIGHT TO ENG. APPR. FOR THE LATEST MAKE DESIGN 720 TWO PLACE DECIMAL: 0.01" CHANGES THE INFORMATION CONTAINED REVISION DATE MATERIAL Q.A. DO NOT SCALE DRAWING OF TEMPLATE. SCALE:1:1 WEIGHT: 0.00 SHEET 1 OF 1 THREE PLACE ISDECIMAL: IN THIS DRAWING THE SOLE 0.004"WITHOUT Silicon NOTICE. CALL HAGER PROPERTY OF HAGER TOLERANCES: COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH FRACTIONAL: 0.01 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST ANGULAR: MACH: THE WRITTEN PERMISSION OF TWO PLACE DECIM REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. THREE PLACE DECIM UBC

ENG. APPR.

SIZE

A

DWG. NO.

SCALE:1:1

756S WEIGHT:

THE INFORMATION CONTAINED REV. IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. REPRODUCTION SHEET 1 OFANY 1 INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

UBC

A


Centene Plaza St. Louis | Missouri


55

DESCRIPTION

ECO NO.

DATE

Door Bottoms

Door Bottom Sweeps

Door bottoms provide a seal against weather. For best results, use in conjunction with a threshold.

Door bottom sweeps are typically used on the exterior of an outswing door.

1 23/32" 43.6

REV.

REV.

DESCRIPTION

ECO NO.

1/2" [12.7]

1 1/4" 31.8

DATE

ECO NO.

ENG. APPR. Q.A.

DESCRIPTION

ECO NO.

DATE

1" 25.4

UBC 7.2 1997 - 1 PART PART 2

DRAWN

DATE

DATE

779S HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

ECO NO.

UBC 7.2 1997 PART 1 PART 2

REV.

7/16" 11.4 DESCRIPTION

1" [25.4]

DESCRIPTION

1/2" [12.7]

1 3/4" [44.5] REV.

REV.

750S

UBC 7.2 1997 PART 1 PART 2

CONFIDENTIAL

ECO NO.

DATE

778S

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

DESCRIPTION

1/4" 6.4

1/2" 12.7

1" 25.4 5/8" 15.9

1/2" PROPRIETARY & [12.7]

Thresholds & Weatherstripping

REV.

801S

-

1/1/2008 -

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

PROPRIETARY & CONFIDENTIAL SIZE

A

DWG. NO.

REV.

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

778S

SCALE:1:1

WEIGHT: 0.15

SHEET 1 OF 1

1 3/4" 44.5

1" HAGER RESERVES THE RIGHT TO 25.1 MAKE DESIGN

MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

UBC 7.2 1997 PART 1

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

A

REV.

750S

SCALE:1:1

WEIGHT: 0.07

SHEET 1 OF 1

1/4" [6.4]

3/4" 19

1 1/16" 27 HAGER RESERVES PROPRIETARY & CONFIDENTIAL THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

1/4" 6.4

3/4" [19.1]

780S

1/2" DRAWN ENG. APPR. 12.7

UBC

PART 1 PART 2

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

PROPRIETARY & CONFIDENTIAL SIZE

DWG. NO.

A

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

REV.

779S

SCALE:1:1

WEIGHT: 0.14

SHEET 1 OF 1

Automatic Door Bottoms REV. HAGER RESERVES THE RIGHT TO MAKE DESIGN THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

DRAWN

UBC 7.2 1997 PART 1

REV.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

PART 2 DESCRIPTION -

ECO NO.

DATE

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

A

REV.

801S

SCALE:1:1

WEIGHT: 0.11

SHEET 1 OF 1

Jamb Weatherstripping

Automatic door bottoms provide an outstanding seal against drafts, light, smoke, and sound. For best results, use in conjunction with a threshold. When door fully A 780S closes, the gasket extends downward to provide a seal. Gasket retracts when door is opened. PROPRIETARY & CONFIDENTIAL

802S

1/2" [12.7]

-

7.2 1/1/2008 1997

-

DESCRIPTION 1/1/2008 -

ENG. APPR.

ECO NO.

REV.

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

HAGER RESERVES 1 5/16" THE RIGHT TO MAKE DESIGN [33.4] THE INFORMATION CONTAINED MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. SHEET 1 OF 1 CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 1/2" INPART OR AS A WHOLE WITHOUT FOR THE LATEST [12.7] THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE. PROPRIETARY & CONFIDENTIAL

SIZE

DWG. NO.

SCALE:1:1

REV.

WEIGHT: 0.12

DESCRIPTION

ECO NO.

DATE

DATE

-

-

5/16"

DRAWN [7.9]

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

864S

SCALE:1:1

REV.

802S

WEIGHT: 0.03

SHEET 1 OF 1

UBC 7.2 1997 PART 1 PART 2

21/32" [16.7] REV.

1/4” 6.4

1 3/4" [44.4]

730S

REV.

3/4” [19.1] Max Drop

DESCRIPTION

ECO NO.

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER 1/4" COMPANIES. ANY REPRODUCTION INPART OR [6.4] AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

Q.A.

740S

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: UBC 0.004" 7.2 1997 PART 1 PART 2

DATE

UBC 7.2 1997 PART 1 PART 2

1 1/4" [31.8]

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES IN THIS DRAWING IS THE SOLE Material <not specified> WITHOUT NOTICE. CALL HAGER PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION ENGINEERING AT FINISH 1-800-325-9995 INPART OR AS A WHOLE WITHOUT FOR THE LATEST THE WRITTEN PERMISSION OF REVISION DATE DO NOT SCALE DRAWING HAGER COMPANIES IS PROHIBITED. OF TEMPLATE.

ECO NO.

891S

UBC 7.2 1997 PART 1 PART 2

PROPRIETARY & CONFIDENTIAL

3/4" 19.1 Max Drop

DESCRIPTION

1/4” 6.4

DATE

21/32" 16.7

& CONFIDENTIAL 1PROPRIETARY 13/16" THE46.1 INFORMATION CONTAINED

3/4” 19.1

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. 13/16" 1/4" CALL HAGER ENGINEERING AT FINISH [20.2] [6.4]1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

A

DWG. NO.

SCALE:1:1

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

DWG. NO.

A

REV.

864

SCALE:1:1

WEIGHT: 0.06

SHEET 1 OF 1

896S

-

SIZE

DRAWN

UBC 7.2 1997 PART 1 PART 2 REV.

730S WEIGHT: 0.22

SHEET 1 OF 1

PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAGER COMPANIES. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF HAGER COMPANIES IS PROHIBITED.

HAGER RESERVES THE RIGHT TO MAKE DESIGN MATERIAL CHANGES Material <not specified> WITHOUT NOTICE. CALL HAGER ENGINEERING AT FINISH 1-800-325-9995 FOR THE LATEST REVISION DATE DO NOT SCALE DRAWING OF TEMPLATE.

DRAWN

-

1/1/2008

ENG. APPR.

-

-

-

Q.A.

TOLERANCES: FRACTIONAL: 0.015" ANGULAR: MACH: 1 BEND: 1 TWO PLACE DECIMAL: 0.01" THREE PLACE DECIMAL: 0.004"

SIZE

A

DWG. NO.

SCALE:1:1

REV.

891 WEIGHT: 0.02

SHEET 1 OF 1


Torres Arcos Bosques II Mexico City | Mexico


57

By-Pass Hager by-pass sliding door hardware series feature quick release hangers and a jump-proof style track.

9110 Series 9130 Series Heavy Duty Aluminum I-Beam Track & Hardware

9514 Series 9583 Series Aluminum Track with 1-3/4” (44 mm) Fascia & Hardware

9611 Series 9612 Series Heavy Duty Aluminum Box Track & Hardware

9614 Series 9683 Series Aluminum Track with 1-3/4” (44 mm) Fascia & Hardware

9673 Series 9674 Series Heavy Duty Aluminum Double Box Track with 2-5/8” (66 mm) Fascia & Hardware

9675 Series 9676 Series Heavy Duty Aluminum Double Box Track & Hardware

9875 Series Heavy Duty Aluminum Box Track

9885 Series 9886 Series Heavy Duty Aluminum Double Box Track

Bi-Fold Hager bi-fold sliding door hardware series feature quick release hangers and a jump-proof style track. They can be used for both bi-fold and multi-fold applications. 9570 Series Medium Duty Steel or Aluminum Box Track & Hardware

9860 Series 9861 Series Heavy Duty Aluminum Box Track & Hardware

9890 Series 9891 Series Heavy Duty Aluminum Box Track & Hardware

Sliding Door Hardware

With Hager sliding door hardware, you can choose from hundreds of fully tested products, including jump proof tracks, self-aligning wheel systems, and complete sets and accessories to meet any need.


Sliding Door Hardware

58

Pocket Hager pocket sliding door hardware series are sold as sets, with replacement parts available separately. They feature a jump-proof style track.

9678 Series Heavy Duty Aluminum Box Track & Hardware

9110 Series 9130 Series Extra Heavy Duty Aluminum I-Beam Track & Hardware

9878 Series Extra Heavy Duty Aluminum Box Track & Hardware

9901 Series Extra Heavy Duty Aluminum Box Track & Hardware

Pocket Door Kits • Jump proof track and rollers • 9601 aluminum box track • Pre-assembled header assembly • Real wood split studs Product

Max Door Weight

Door Thickness

Door Width

Door Height

Hanger Bearings

9628

150 lbs

1-3/8” - 1-3/4”

3’0”

9’0”

Steel ball

9629

150 lbs

1-3/8” - 1-3/4”

3’0”

8’0”

Steel ball

9630

150 lbs

1-3/8” - 1-3/4”

3’0”

7’0”

Steel ball

9631

125 lbs

1-3/8” - 1-3/4”

3’0”

6’8”

Molded Celcon

Kit contains 1 header assembly, 2 pair of split studs, 2 heavy duty hangers, 2 door hanger plates, 1 bumper, 1 pair of door guides, 1 adjusting wrench, 2 floor plates, 2 end brackets

Product

Max Door Weight

Door Thickness

Door Width

Door Height

Hanger Bearings

9850

250 lbs

1-3/8” - 1-3/4”

4’0”

8’0”

Steel ball

Kit contains 1 header assembly, 3 pair of split studs, 2 heavy duty hangers, 2 door hanger plates, 1 bumper, 1 pair of door guides, 1 adjusting wrench, 3 floor plates, 2 end brackets


59


Hager Companies is a proud partner of The Green Schoolhouse Series -- a unique collaboration that gifts high-performance, environmentally sustainable, LEED速 Platinum designed schoolhouses to Title I, low income public schools, making them less reliant on outdated and uninspired portable classrooms. Hager is the exclusive provider of door hardware for the schoolhouses.


photography credits 1 | katie boisclair 3 | hager companies 7 | shannon menard 14 | hager companies 19 | mandy rhoden 21 | hager companies 25 | jennifer withee 28 | istock photo 35 | hager companies 38 | sheryl simon 42 | hager companies 45 | studio 804 48 | shutterstock 53 | shannon menard 54 | hager companies 56 | josĂŠ luis ruiz 59 | hager companies 60 | the green schoolhouse series


www.hagerco.com 800 325 9995 Part No. 5-500-0412

Hager Condensed Catalog  

Hager Condensed Catalog

Read more
Read more
Similar to
Popular now
Just for you