EXOTIC S Leader by quality
WATER/WATER HEAT PUMP
E F F ICIE NT GE OT HER MAL HEATPUMP FOR BEDR OCK , SOIL OR LAK E WATER HEAT
F L IK: 9 - 0 9 0 1 - 3 3 8
Designed for nordic climate!
EXOTIC S - the heat pump for environmental and cost efficient domestic heating The Euronom heat pumps are designed to retrieve solar energy out of deep strata, surface or lakes.
By circulation in a sealed system the energy is retrieved to the heat pump. Through the Carnot process the temperature increases from 35-55 째C. The system uses less than a 1/3 of the electrical energy to the compressor and more than 2/3 is retrieved from the solar energy! Connected to the ExoTank VPS, which is part of the FlexiFuel system, cost effective heating and comfortable indoor climate is achieved.
5 to 1
effectiveness (COP 4,7)
the highest quality
HIGH EFFICIENCY RATIO
WE ASSIST YOU!
The design of Exotic S is the result of long experience in the development of heating systems for the Scandinavian climate. Exotic S is completely manufactured in stainless steel for maximum length of life.
An import characteristic of Exotic S is the low sound, which on earlier water/water heat pumps could be irritating. Exotic S is equipped with a silencing layer for both low and high frequency sound.
Exotic S is equipped with a new optimized scroll compressor, which together with an extra large vaporizer and an extra large condensor has a high heat factor (COP).
If you wish a connection recommendation or a savings calculation, contact us or one of our experienced distributors.
Connection to ExoTank VPS The Euronom ready-made pipe fitting and hose connection kit makes it easy to connect Exotic S to the accumulator tank ExoTank VPS.
USER-FRIENDLY CONTROL SYSTEM Exotic S is equipped with the third generation control system ExoTrol, which can be pre-programmed for a large number of situations. When connected to ExoTank VPS the Exotic S has longer operational periods, which togeher with fewer starts and stops
give a longer life time. We can also offer the control system SOLO, a simplier option with less setting possibilities, which can be connected to a present accumulator tank.
BEDROCK, SOIL AND LAKE WATER HEAT
An anchored collector on the bottom of the lake retrieves stored solar energy. An anchored collector on the bottom of the
A collector placed in a drilled hole in the strata, retrieves stored solar energy.
SURFACE GROUND HEAT
A burried collector retrieves stored solar energy.
EXOTANK VPS - SYSTEM CONNECTION Radiator thermostat Indoor sensor
Control system Exotrol
Circulation pump Radiator system or floor heating
In Heat exchanger for tap water
Supplementary electricity: 2 pcs. heating cartridges Totally 9 or 12 kW
Effective diffusor From heat pump To heat pump
Solar collector soil, supplement to VPS500
From solar collector
EXOTANK VPS The heat pump Exotic S is most effective together with ExoTank VPS, which is part of the FlexiFuel system. The ExoTank VPS warms the tap water in double heating exchangers. The unique diffusor ensures the temperature separation. This means that there is never a large stagnent volume of tap water in changeable temperatures where legionella bacteria can thrive. Exotank VPS warms the tap water directly as it flows through, which is the best guarantee that you always get a fresh and bacteria free water to the shower and other points. If higher hotwater capacity is required we recommend our twin-tank system. One of the unique advantages with the VPS tank is that it can operatate together with other external heating sources; wood, pellet or oil boilers, solar collectors etc.
To solar collector
This fuel flexibility is valuable because the system always chooses the most favourable heating as energy costs and energy policy can change in the future.
EXOTIC S IS PART OF THE FLEXIFUEL SYSTEM Exotic S connected to a ExoTank VPS in the FlexiFuel system gives world class flexibility! The system always chooses the cheapest energy type; wood, pellets, gas, district heating, oil or electricity.
M PAT I
WATER / WATER HEAT PUMP DELIVERY CONTENT EXOTIC S
Strong frame of stainless steel. Well insulated and sound damping panels of stainless steel. Hermetic scrollcompressor, conden sor/soldered flat heat exchanger of stainless acidproof steel, extra large. Well dimensioned circulation pumps for both the cold and warm side. Termostatic expansion valve, service connection, pressure switches, starting equipment and motor protection.
EXOTIC S • DIMENSIONS
EXOTROL – CONTROL UNIT FOR EXOTIC S AND EXOTANK
The ExoTrol unit is mounted close to the ExoTank and connected to the electrical control box in the house by 3x400 V, N and earth 20 A, 4 mm2. The included cables with multipole pin connectors are connected to Exotic S and ExoTank. The electrical installation is simple, fast and safe as the cable connectors fit the corresponding contacts on Exotic S and ExoTank and can not be inverted.
V ibr a. s e · 0901
Exotic S is a water/water heat pump for private houses and small premises. Cooling agent R407C. The heat pump is delivered in a complete unit that only needs external connections for water and electricity. The unit fulfils current regulations for cooling equipment, electrical installations, pressure vessels and CE-marking.
• Connections and motor protection for heating cartridges and compressor • Automatic fuses 3x10 A • Circuit board with processor • Display panel with push buttons • Switch for heating cartridges
ExoTrol controls: • • • •
Compressor Circulation pump, cold and warm side 2 pcs. of heating cartridges Shunt valve
Six temperature sensors:
Incoming brine temperature 0°C MODELL Exotic S6 Exotic S8 Exotic S10 Exotic S12 Exotic S15 Exotic S17 Compressor ZH19 ZH21 ZH26 ZH30 ZH38 ZH45 Inlet temperature °C 35 50 35 50 35 50 35 50 35 50 35 50 Heat capacity, kW 7,3 6,75 8,0 7.40 9,95 9,2 11,55 10,8 14,35 13,4 16,9 15,6 Electrical input, kW 1,62 2,07 1,76 2,25 2,16 2,74 2,48 3,26 3,08 3,97 3,63 4,59 Heating factor COP 4,5 3,3 4,5 3,3 4,6 3,4 4,7 3,3 4,7 3,4 4,7 3,4 Net weight, kg 109 111 119 129 137 139 Dimensions WxDxH 598x650x(885-920) for all versions
In accordance with SS EN 255 for cooling agents in at 0 °C and heating agents out at 35 °C and 50 °C. Loads for circulation pumps are not included. The right to technical modifications is reserved.
Box 700 SE 391 27 Kalmar Sweden Tel. +46 480 221 20 Telefax +46 480 870 17 www.euronom.se email@example.com
Inside temperature Outside temperature Inlet temperature Water temperature Hot gas sensor Settings can be made by the display to minimize the energy consumption while maintaining the heat comfort.
• Times, current values, desired values, and operational information • The alarm shows reason and remedy • The room sensor has a LED that flashes on alarm. The display shows the alarm fault • With the help of two switches the heating cartridges can be manually operated. Even the shunt valve can be set manually.
SOLO - the simplier control unit
ExoAir can also be operated with an accumulator by a simplier control system - SOLO, whch is mounted in the same kind of connection box as ExoTrol, but has fewer operational options.
Contact our distributor for more information.
FL I K : 9 - 09 0 1 -3 3 8
• • • • • •