Page 1

Advanced Structured Materials Volume 29

Series Editors Andreas Ă–chsner Lucas F. M. da Silva Holm Altenbach

For further volumes: http://www.springer.com/series/8611


Andreas Öchsner Lucas F. M. da Silva Holm Altenbach •

Editors

Characterization and Development of Biosystems and Biomaterials

123


Editors Andreas Öchsner Faculty of Health Science & Biomedical Engineering University of Technology Malaysia—UTM Johor Malaysia

Holm Altenbach Lehrstuhl für Technische Mechanik Otto-von-Guericke-Universität Magdeburg Magdeburg Germany

Lucas F. M. da Silva Department of Mechanical Engineering Faculty of Engineering University of Porto Porto Portugal

ISSN 1869-8433 ISBN 978-3-642-31469-8 DOI 10.1007/978-3-642-31470-4

ISSN 1869-8441 (electronic) ISBN 978-3-642-31470-4 (eBook)

Springer Heidelberg New York Dordrecht London Library of Congress Control Number: 2012954537 Ó Springer-Verlag Berlin Heidelberg 2013 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)


Preface

The area of biological systems and materials is a growing research field of immense importance. The possibility to predict or even to influence the ‘lifetime’ of parts of the human body or to offer adequate replacements in the case of failure directly influences our entire well-being. In many cases, this becomes more and more important at higher age when joints or other parts must be replaced in order to guarantee an adequate mobility and function of our body. To adopt the mechanical performance of structural parts of our body or to offer alternatives if they do no more function properly in order to meet the general biological life expectancy is a great challenge which requires joint efforts of many academic disciplines. On the other hand, our environment affects biological systems in the short or long-time range and avoiding negative influence and impact on any living system is a topic of many challenging investigations. Furthermore, many materials and structures seen in living organisms, i.e. human body, animals, and plants, are optimized to an extend which is still difficult to achieve for artificial materials and structures. Thus, learning from nature is nowadays a new direction to overcome limitations of classical engineering materials. The 5th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2011, was held in Algarve, Portugal, from 3 to 6 July, 2011 with a strong focus on bio related topics. This conference served as an excellent platform for the engineering community to meet with each other and to exchange the latest ideas. This volume contains 18 revised and extended research articles written by experienced researchers participating in the conference. The book will offer the state-of-the-art of tremendous advances in developments of materials for drug delivery, dental implants and filling materials, biocompatible membranes, bioactive surface coatings, and bio-compatible and eco-sustainable building materials. Furthermore, biosystems such as microorganisms, the human eye, the musculoskeletal system and human body parts and respective replacements are subjects of the contributions.

v


vi

Preface

The organizers and editors wish to thank all the authors for their participation and cooperation which made this volume possible. Finally, we would like to thank the team of Springer-Verlag, especially Dr. Christoph Baumann, for the excellent cooperation during the preparation of this volume. August 2012

Andreas Ă–chsner Lucas F. M. da Silva Holm Altenbach


Contents

Influence of Al2O3/Pr Nanoparticles on Soil, Air and Water Microorganisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Paweł Polis, Paulina Mosdorf, Ewa Karwowska, Agnieszka Jastrze˛bska, Andrzej Olszyna, Antoni Kunicki, Ryszard Piramidowicz, Krzysztof Anders and Anna Jusza

1

Hardness Improvement of Dental Amalgam Using Zinc Oxide and Aluminum Oxide Nanoparticles. . . . . . . . . . . . . . . . . . . . . . . . . . Noorhana Yahya, Poppy Puspitasari and Noor Rasyada Ahmad Latiff

9

Review of Rapid Prototyping Techniques for Tissue Engineering Scaffolds Fabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . Osama A. M. Abdelaal and Saied M. H. Darwish

33

Molecular Dynamics Study of Oligomer-Membrane Complexes with Biomedical Relevance . . . . . . . . . . . . . . . . . . . . . . . . André F. Ferreira, Patrícia Alves, Jorge F. Coelho, Maria H. Gil and Pedro N. Simões Methods to Prevent or Mitigate Accidents with Large Animals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wolfgang Sinz, Heinz Hoschopf, Stefan Kirschbichler, Ernst Tomasch, Hermann Steffan, Saied Mohamed H. Darwish and Motaz Almodimigh

55

69

vii


viii

Contents

Using Quality Function Deployment Methodology to Translate Qualitative to Quantitative Requirements in the Design a of a Knee Re-trainer . . . . . . . . . . . . . . . . . . . . . . . . . Alejandro Luna-Avilés, Luis Héctor Hernández-Gómez, Juan Alfonso Beltrán-Fernández, Guillermo Urriolagoitia-Calderón, Diana Gómez-Michel, Dulce María Martínez-Espinoza, Efrén Villegas-Acosta and Guillermo Urriolagoitia-Sosa Research Advances and Perspective of Multi-Articulated and Robotic Hands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Luis Héctor Hernández-Gómez, Alejandro Tonatiu Velázquez-Sánchez, Esther Lugo-González, Christopher René Torres San Miguel, Juan Alfonso Beltrán-Fernández, Guillermo Urriolagoitia-Calderón, Guillermo Urriolagoitia-Sosa and Mauricio Aron Pérez-Romero Effects of Rice Husk as a Precursor on Crystallization Kinetic of Glass Ceramics Derived from 45S5 BioglassÒ . . . . . . . . . . . Wilaiwan Leenakul, Sukum Eitssayeam, Gobwute Rujijangul, Tawee Tunkasiri, Natee Tongsiri and Kamonpan Pengpat Analysis of the Bioactive Surface of Ti-35Nb-7Zr Alloy After Alkaline Treatment and Solution Body Fluid. . . . . . . . . . . . . . . S. G. Schneider, A. L. A. Escada, E. T. A. Carvalho and A. P. R. Alves-Claro Structural and Compositional Characterization of Silverfil Amalgam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chanthiriga Ramasindarum, Vengadaesvaran Balakrishnan, Noor Hayaty Abu Kasim and Mohd Ambar Yarmo Synthesis and Characterization of Poly (L-Lactic Acid) for Use in Drug Delivery System . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mauro Cesar Terence, Nilson Casimiro Pereira, Sonia Braunstein Faldini, Leila Figueiredo de Miranda, Cristiane Doria Kalupgian and Gabriel Domingues de Souza Histological Analysis of the Osseointegration of Ti-30Ta Dental Implants After Surface Treatment . . . . . . . . . . . . . . . . . . . . . Ana Paula Rosifini Alves Claro, João Augusto Guedes de Oliveira, Ana Lúcia do Amaral Escada, Luciana Maria Ferreira Carvalho, Mário Jefferson Quirino Louzada and Maria Cristina Rosifini Alves Rezende

99

109

129

143

153

167

175


Contents

ix

Innovation Technology to Engineer 3D Living Organs as Intelligent Diagnostic Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hossein Hosseinkhani

183

Soil: A Material for Bio-Compatible and Eco-Sustainable Contemporary Buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dora Francese, Paulo Mendonça and Luca Buoninconti

193

New Materials for Ecological Building Products . . . . . . . . . . . . . . . . . Dora Francese, Giuseppe Mensitieri, Salvatore Iannace and Claudia Balestra Analysis of Failure Mechanism of Forced Convection in the Cornea of the Human Eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . Humberto Dória Silva, Luiz Cláudio Pereira Dória, Cristiana Pereira Dória, Cristiane Pereira Dória, Maria do Carmo Tatiana Dória Silva, Humberto Dória Silva Júnior and Maria Tamires Dória Silva Microstructure and Properties of Nanostructured Calcium Phosphate/Titania Porous Coatings via Micro Arc Oxidation . . . . . . . Sakine Abbasi, Hamid Reza Rezaie and Farhad Golestani-Fard Simulation of Variation of Intraocular Pressure . . . . . . . . . . . . . . . . . Humberto Dória Silva, Luiz Cláudio Pereira Dória, Cristiana Pereira Dória, Cristiane Pereira Dória, Maria do Carmo Tatiana Dória Silva, Humberto Dória Silva Júnior and Maria Tamires Dória Silva

203

217

227

235

Characterization and Development of Biosystems and Biomaterials  

reading material for students

Read more
Read more
Similar to
Popular now
Just for you