AFTER DELIVERY CHECK
Date of Check ____________________ Hourmeter Reading ______________________ hours MACHINE: Product Identification Number ________________________________________ OWNER: Name ___________________________________________________________ Address____________________________________________________________ DEALER: Name____________________________________________________________ Address____________________________________________________________ HYDRAULIC SYSTEM
COOLING SYSTEM
❑ Check the oil level. ❑ Check the pressure setting of the main relief valve. ❑ Replace the hydraulic oil filter.
FUEL SYSTEM
❑ Check for leaks. ❑ Drain water and sediment from fuel system.
GENERAL
❑ Look for oil leaks. ❑ Check tire pressure. ❑ Check the steering/loader controls levers and seat
ELECTRICAL SYSTEM
❑ Check battery. ❑ Check operation
of starter, alternator, instruments, and warning lamps.
❑ Check operation of working lamps (if equipped). LUBRICATION
❑ Lubricate all pivot points.
bar.loader control lock for correct operation.
❑ Tighten all hose clamps.
❑ Check drive chain tension. ❑ Check wheel nut torque.
TRIM THIS EDGE
❑ Check the radiator and reservoir coolant levels. ❑ Check for leaks..
Alt= to hide template information Alt+ to display template information
AFTER DELIVERY CHECK After First 100 Hours of Operation of New Machine
ENGINE
❑ Check condition of drive belt. ❑ Check engine oil level. ❑ Check engine speed at idle and at full throttle. ❑ Service air cleaner.
alarm (if equipped), etc.
❑ Make sure the machine has the Operators Manual in the manual storage box.
DEALER: Learn whether the owner or operator has any problems with the machine. Make sure the owner or operator understands all the information in this manual. Technician (signature)___________________________________ Date_________________ Dealer (signature) ______________________________________ Date_________________ Owner (signature) _____________________________________ Date_________________ Dealer Copy 171
TRIM THIS EDGE Rac 0-00000 RIGHT PAGE
Template Name: OM_1_col Template Date: 1997_02_06
SAFETY
❑ Inspect the ROPS. Torque mounting bolts. ❑ Check the safety decals and replace if necessary. ❑ Check safety components, seat belt, lamps, backup
