Page 1

5

©2019 Helmet House, Inc


6

FULL-FACE and MODULAR HELMETS ®

SOLIDS/MATTE BLACK, WHITE, MATTE BLACK Page 12

®

GRAPHICS BRINK TC-1, TC-2, TC-5, TC-10 DAJIRO MEMORIAL TC-1 LAVERTY TC-4 MARQUEZ BLACK CONCEPT TC-1 MARQUEZ MOTEGI 2 TC-1 MARQUEZ 5 TC-1 POWER RUSH TC-8 Pages 13-15

® ®

SOLIDS/MATTE/METALLICS BLACK, WHITE, SILVER, BRILLIANT YELLOW, MATTE BLUE MATTE BLACK, MATTE DEEP GREY

GRAPHICS CONJURE TC-7, TC-9 CROSSBAR TC-1, TC-3, TC-5, TC-10 REDUX TC-1, TC-2, TC-3, TC-5, TC-6

Page 18-19

Pages 20-21

®

®

SOLIDS/MATTES/METALLICS BLACK, WHITE, MATTE BLACK, LIGHT SILVER, WINE RED, BLACK METALLIC, SHINE RED, ANTHRACITE METALLIC, BRILLIANT YELLOW, MATTE DEEP GREY Pages 24-25

GRAPHICS DEDICATED TC-5 HARMONIC TC-2, TC-7 INCISION TC-1, TC-5, TC-6 MARQUEZ POWER UP! TC-1 PHILOSOPHER TC-2, TC-4, TC-5, TC-10 RECOUNTER TC-5, TC-10 RUMPUS TC-2, TC-4, TC-5, TC-10 TROOPER TC-1, TC-10 Pages 26-28

®

®

SOLID/MATTE BLACK, MATTE BLACK 3XL SIZE ONLY

SOLID/MATTE BLACK, WHITE, TANGERINE, MATTE BLUE, MATTE DEEP GREY, MATTE BLACK, BASALT GREY,

Page 29

Page 32-33

®

SOLIDS/MATTES/ METALLICS BLACK, WHITE, WINE RED, ANTHRACITE METALLIC, LIGHT SILVER, MATTE BLACK, MATTE BLUE METALLIC, MATTE DEEP GREY

®

GRAPHICS EXCURSION TC-3, TC-5, TC-6 SPLICER TC-2, TC-6, TC-8 Pages 38-39

Pages 36-37

toll free / 1-800-421-7247 online / www.helmethouse.com

NOTE: All prices are subject to change without notice. ©2019 Helmet House, Inc


7

OPEN-FACE and OFF-ROAD HELMETS ® ®

SOLIDS/MATTES/METALLICS/ BLACK, MATTE BLACK, OFF WHITE, MATTE BROWN, RAT GREY GRAPHICS CARBURETTOR TC-6, TC-8 NOSTALIGIA TC-10 SEQUEL TC-5, TC-10 WAIMEA TC-10 Pages 42-43

SOLIDS/MATTES/METALLICS/ BLACK, WHITE, ANTHRACITE, MATTE BLACK, WINE RED, BRILLIANT YELLOW, MATTE DEEP GREY GRAPHIC REBORN TC-1, TC-5 Page 46

-

®

®

SOLIDS/MATTES/METALLICS BLACK, WHITE, ANTHRACITE METALLIC, LIGHT SILVER, MATTE BLACK, WINE RED, MATTE DEEP GREY, PEARL GREY, CRYSTAL WHITE

CJ-2SP SHIELD V-440 VISOR Page 47

Pages 48-49

® ®

SOLIDS/MATTES/ METALLIC BLACK, WHITE, SILVER, MATTE BLACK, MATTE DEEP GREY GRAPHIC NAVIGATE TC-2, TC-3, TC-5, TC-8

SOLIDS/MATTE/ METALLICS BLACK, WHITE, MATTE BLACK Page 56

Pages 52-53 ®

GRAPHICS BLAZON TC-1, TC-5, TC-6 BRAYTON TC-1 GLAIVE TC-1, TC-2, TC-5, TC-8 GRANT 3 TC-1, TC-2, TC-3 ZINGER TC-1, TC-2, TC-10

SRL & SRL 2 (SHOEI RIDER LINK) COMMUNICATION SYSTEM

Pages 57-58

Pages 60-61

®

PHOTOCHROMIC SHIELD with PINLOCK® PINS CWR-1 Pages 62-63

FOG RESISTANT SHIELD & LENS for SHOEI FULL-FACE HELMETS CLEAR, DARK SMOKE, LIGHT SMOKE, AMBER, YELLOW Page 64 ©2019 Helmet House, Inc


8

ADVANCED TECHNOLOGY

SAFETY, DESIGN and PASSION SHOEI helmets take their form from state-of-the-art technology combined with nearly 60 years of helmet building experience, using the most advanced materials available. With safety, comfort, and passion in mind, SHOEI product development always takes customer feedback, demands of the market, and new trends into consideration. Although safety and functionality always play the dominant role, the design aspect is never neglected. This special combination of perfect functionality, unique design, and unsurpassed quality standards are testimony to the passion that SHOEI has for motorcycle riders worldwide.

PRODUCTION and QUALITY ASSURANCE For all the energy and passion invested into the development of a product, the same level of care and due diligence must be achieved during the production process. A number of unique, state-of-the-art processes combine to yield the unrivaled quality that only SHOEI helmets are known for, and each helmet must pass several rigorous inspections throughout the production process before being awarded the famous SHOEI hexagon. The actual production of a single SHOEI helmet takes up to five days.

AIM+ (Advanced Integrated Matrix Plus); Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2015 and DOT standards. Hand-laid interwoven layers of fiberglass with lightweight organic and high performance fibers. SHOEI’s strongest, lightest, most elstic shell provides optimal impact absorption. ROBOTIC LASER CUTTING gives each helmet its final shape. All protrusions created in manufacturing are cut off, and the openings for the shield and ventilation systems are cut into the helmet shell with robotically-controlled lasers. Once this process is complete, all helmets are thoroughly inspected to ensure that they have the correct material thickness and weight. SHOEI’S PAINTING AND GRAPHIC APPLICATION processes are second to none. Though some of our production steps have been automated today, it is absolutely critical that many processes are still completed by hand. Combining meticulous handwork and automation in production ensures optimal quality, and each SHOEI helmet still boasts a premium-painted finish with hand-applied decals before being sealed with additional layers of clearcoat. SHOEI applies up to five layers of paint to each helmet.

FINAL ASSEMBLY of each helmet is done with care and precision, including the installation of ventilation sliders, shield seals, impact absorbing EPS liners, and comfort interiors. Each helmet passes a detailed final inspection before being passed on to the consumer. This strict compliance with the production processes and associated quality control standards guarantee the consistently high quality of a SHOEI helmet. ©2019 Helmet House, Inc


AERODYNAMICS

Motorcyclists live in a stream of moving air, which is precisely why every SHOEI model undergoes extensive aerodynamic testing in SHOEI’s very own wind tunnel. In addition to the shell, the aerodynamic efficiency of spoilers and vents are also analyzed in SHOEI’s wind tunnel for optimal performance. As a result, every SHOEI helmet boasts an aerodynamic design that increases air flow and reduces noise, buffeting, and lift, ultimately increasing performance and overall rider comfort.

9

VENTILATION

An integral part of the development process, SHOEI’s ventilation systems direct cooling, moisture-drying air into the helmet, and utilize areas of negative air pressure to the rear of the helmet to draw warm, damp air through the outlets and into the outside environment. Perfect shape and placement of vent inlets and outlets, along with air channels buried within SHOEI’s Dual-Layer EPS Liners, are the basis for optimum ventilation, and are a significant part of what separates SHOEI from the competition.

QR-E BASE PLATE SYSTEM SHOEI’s QR-E Base Plate System is one of the most advanced shield attachment mechanisms in the world. The simple shield release makes it easy to change your shield as conditions dictate. Also, widely appreciated is the convenience of SHOEI’s shield fine tuning adjustment dial. Each time the shield is lowered, the spring-loaded base plates pull the shield back to contact the window beading evenly, ensuring a wind and waterproof seal.

SpringLoaded Base Plates Fine-Tuning Adjustment Dial

CWR-F, CWR-1, CW-1, CWF-1, CNS-2, & CNS-3 SHIELDS CWF-1

CW-1

CWR-1

CWR-F

CNS-2

CNS-3

The CWR-F shield, featured on SHOEI’s X-Fourteen helmet, sets a new standard in shield aerodynamics; like the Qwest helmet’s CW-1 shield, it is both taller and wider than the CX-1V it replaces. Both shields protect riders from 99% of the sun’s damaging UVA and UVB rays, and the CW-1’s three dimensional injection-molding process ensures distortion-free vision. All four shields work in conjunction with SHOEI’s optional Pinlock® system to deliver fog-free vision in even the most challenging conditions. The RF-1200’s and RF-SR’s CWR-1 shield offers all these features, plus innovative ribs on the top and bottom edges of the shield that improve rigidity and eliminate bending occuring from wind pressure, as well as opening and closing. The Pinlock®-ready CWR-F and CWF-1 shields provide a flat surface to accommodate tear-off sheets, while still ensuring a tight seal between the shield and the helmet’s window beading. Tear-off posts on the flat shields allow for tear-off tension to be adjusted without tools, making it easier and quicker to adjust racing tear-offs. The CNS-2, for the Hornet X2, and CNS-3, included with the NEOTEC II and GT-Air II, comes equipped with the Pinlock® EVO fog-resistant system, protects from 99% of the sun’s damaging UV rays, and provides improved air/water sealing and noise reduction. ©2019 Helmet House, Inc


10 ®

FULL-FACE ROAD RACE HELMET A E R O D Y N A M I C S • A D J U S TA B I L I T Y • V E N T I L AT I O N The flagship model of SHOEI’s premium helmet lineup, the X-Series, has earned the respect and praise of many of the world’s top road racers over the years, and the X-Fourteen is the next generation of this high-performance pedigree. Developed using rider input from the world’s top road racing athletes like Marc Marquez and Bradley Smith, careful consideration was given to every detail of the X-Fourteen. Technology continues to progress every aspect of a racer’s equipment, and the X-Fourteen’s next-level features set the new standard for performance, adjustability, and safety that today’s world-class athletes can trust all the way to the podium.

STAT E- O F - TH E- A RT A ER O D Y N A M IC S

REPLACEABLE REAR FLAPS

Ask any engineer in the racing paddock, and they’ll tell you that one of the most important considerations in motorcycle design - the difference between winning and losing - is aerodynamics. The state-of-the-art wind tunnel facility at SHOEI’s Ibariki factory is an integral part of the helmet development process, and it was here that the aerodynamic performance of the X-Fourteen was born. Placing an emphasis on aerodynamic optimization in racing’s numerous riding positions, SHOEI engineers achieved the most aerodynamic and stable X-Series helmet yet. The X-Fourteen showcases an advanced shell shape, along with a completely redesigned Rear Stabilizer. The Patent-Pending Rear Stabilizer system features a standard set of Rear Flaps that can be replaced with an optional, narrower set of flaps to help fine-tune resistance and aerodynamic performance depending on rider preference and track demands. In addition, strategically placed ridges along the top of the shell and chin bar allow wind to stream off the helmet with minimal resistance, ultimately reducing drag and improving stability. Add to the mix a removable Lower Air Spoiler that can be affixed to the chin bar to further improve aerodynamic stabilization, and you’re left with the new standard for high-speed performance.

REMOVABLE LOWER AIR SPOILER

V E N T ILATION - A N E W S TA ND A R D

CHEEK PAD COOLING SYSTEM

Next-level ventilation performance was a top priority when SHOEI engineers conceptualized the X-Fourteen. Boasting six air intakes and six exhaust outlets - all strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet - the X-Fourteen’s ventilating prowess is second to none. The X-Fourteen’s high performance cheek pad cooling system delivers refreshing air to the rider’s cheek area, thanks to channels cut through the EPS liner and corresponding air holes located in the cheek pad foam. Combined with the newly positioned side air outlets (moved rearward to optimized hot air expulsion), the X-Fourteen’s ventilation system cools and clears warm, humid air from the rider’s face with great efficiency. Further enhancing the X-Fourteen’s advanced racing characteristics, the entire ventilation system has been optimized in SHOEI’s wind tunnel to excel when in the tucked racing position, even behind windscreens. ©2019 Helmet House, Inc


11

C WR - F S H IE L D / Q R - E B A S E P L ATE

SHIELD TAB and LOCK

The X-Fourteen’s CWR-F race shield provides a vast field of vision that today’s top racers demand. Innovative ribs on the top and bottom edge of the shield improve rigidity and eliminate the bending effect that may occur from wind pressure during high-speed riding, and the all-new double shield locking mechanism prevents potential unwanted shield openings in the event of an accident. VORTEX GENERATORS The CWR-F race shield also features SHOEI’s exclusive patent-pending Vortex Generators, which effectively reduce air friction and improve airflow around the helmet’s surface. CWR-F race shields provide a flat surface to accommodate racing tearoffs, and the newly designed tearoff posts allow for tension to be adjusted without tools for a quick and easy installation. Coupled with the CWR-F race shield, the X-Fourteen’s innovative QR-E base EASY-ADJUSTMENT plate system facilitates quicker shield changes than ever before. TEAR-OFF POSTS

EXPANDED X-FOURTEEN VISION RANGE X-TWELVE VISION RANGE

HIGHLY ADJ USTABLE INTER IO R The X-Fourteen is equipped with a fully removable, washable, replaceable, and adjustable 3D Max-Dry Custom Interior System. SHOEI’s exclusive Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, and in combination with the X-Fourteen’s superior ventilation system, keeps racers and aggressive riders alike cool and dry during intense riding sessions. The 3D center pad components are three-dimensionally shaped to match the contours of a rider’s head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, highspeed racing. Additionally, the X-Fourteen’s 3D Max-Dry Custom Interior System allows riders the opportunity to replace each section of the center pad with optional thicknesses for a completely customizable fit. The star of the X-Fourteen’s 3D Max-Dry Custom Interior System is the all-new, patent pending rotating liner components, which allow riders to adjust the position/angle of the helmet by up to four degrees (see image above) to increase the upper field of vision while tucked in extreme racing positions. The SHOEI X-Fourteen also includes ear pads, a removable breath guard, and chin curtain to complete the comfort package.

DUA L-LAY E R /M ULT I - D EN S ITY E P S L IN ER The X-Fourteen’s Dual-Layer, Multi-Density EPS liner provides enhanced impact absorption by utilizing varying densities of foam in key areas around the rider’s head; it is also designed to allow cooling air to travel unrestricted through tunnels created in the EPS, further enhancing the X-Fourteen’s superior ventilation characteristics. In addition to enhanced impact absorption and ventilation, the precise placement of multi-density EPS liner material yields a more compact, lightweight design.

HELMET SIZE

XS

XS-XXL

LG

XL

2XL

S

M

L

XL

LINER

S

M

L

XL

MD

LG

XS

MASK LINER

4

MD

SHELL

HELMET SIZE

SHELL SIZES

SM

SM S

XL

2XL

L

CENTER PAD

S13

S9

M9

L9

XL9

XL5

CHEEK Standard PADS Optional

39mm

35mm

35mm

35mm

35mm

31mm

43/35/31

39/31

39/31

39/31

39/31

39/35

NOTE: Optional 43mm cheek pad available ©2019 Helmet House, Inc


WHEN MILLISECONDS COUNT

12

FU L L - F A CE H ELMET FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Dual-Layer Multi-Density EPS liner enhances impact absorption and ventilation • Four shell and five EPS liner sizes present increased fit options that help to comfortably fit most head sizes • Impact absorbing EPS liner throughout the entire chin bar with Cheek Pad Cooling System • Standard Rear Flaps can be replaced with optional, narrower flaps to customize aerodynamics, depending on rider preference and track demands • Removable Lower Air Spoiler can be affixed to the chin bar to improve aerodynamic stablization Ventilation System • Upper air intake vent is positioned to maximize air volume into the helmet interior • Top outlet vent is separate from the Rear Stabilizer, allowing it to be positioned for optimum flow-through ventilation • Cheek Pad Cooling System features channels cut through the EPS liner and corresponding air holes in the cheek pad foam, cooling and clearing warm, humid air away from the rider’s face • Breath guard and chin curtain included Multi-Ply Matrix AIM+ Shell • Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2015 and DOT standards • Hand-laid interwoven layers of fiberglass with lightweight organic and high-performance fibers • SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption 3D Max-Dry Custom Interior System • The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning, center and cheek pads can be replaced with optional thicknesses for a customizable fit • Cheek pads and center pad can be manipulated to allow riders to adjust the position/angle of the helmet by up to four degrees, increasing the upper field of vision while tucked in extreme racing positions • Comfortable, 3D Max-Dry helmet liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, keeping aggressive riders cool and dry • E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head • Extra comfort provided by, removable ear pads, breath guard, and chin curtain Standard Chin-Strap Snap • Neatly secures chin strap CWR-F Shield and QR-E System • QR-E base plate system allows for tool-less shield removal and installation • Exclusive patent pending Vortex Generators on shield reduce air friction • Scratch-resistant coating and Pinlock® EVO Fog Resistant System • 99% protection from harmful UV A & B rays • All-new double shield locking mechanism prevents unwanted shield openings Available Only to Authorized Shoei Elite Dealers

WHITE

SOLIDS MSRP

MATTE MSRP

$731.99

$742.99

Includes Fog Resistant System REAR VIEW

SOLIDS & MATTE Sizes XS S M L XL 2XL

Black

White

Matte Black

0104-0105-03 0104-0109-03 0104-0135-03 0104-0105-04 0104-0109-04 0104-0135-04 0104-0105-05 0104-0109-05 0104-0135-05 0104-0105-06 0104-0109-06 0104-0135-06 0104-0105-07 0104-0109-07 0104-0135-07 0104-0105-08 0104-0109-08 0104-0135-08 SHOEI SHELF TALKER X-FOURTEEN Part# 02-850

BLACK

MATTE BLACK

REPLACEMENT SHIELDS & LENSES CWR-F Pinlock® EVO Lens Clear 0209-9300-00 CWR-F Shield Clear w/Tearoff Posts 0209-9500-00 CWR-F Shield Hi Viz Yellow w/Tearoff Posts 0209-9503-00 CWR-F Shield Dk Smoke w/Tearoff Posts 0209-9505-00

REPLACEABLE REAR FLAPS Standard Narrow

TECHNICAL INFORMATION Please Note: Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Weight: 3.6 lbs/1634 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, six per master carton

0204-2907-00 0204-2807-00

Replacement parts for these helmets may be found on page 70.

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


WHEN MILLISECONDS COUNT

REAR VIEW

DAIJIRO MEMORIAL TOP VIEW

MSRP

DAIJIRO MEMORIAL TC-1

$889.99

Sizes

TC-1

XS S M L XL 2XL

0104-2301-03 0104-2301-04 0104-2301-05 0104-2301-06 0104-2301-07 0104-2301-08

REAR VIEW

TOP VIEW

POWER RUSH TC-8

Includes Pinlock® Shield & Lens

MSRP

$889.99

POWER RUSH Sizes

TC-8

XS S M L XL 2XL

0104-2208-03 0104-2208-04 0104-2208-05 0104-2208-06 0104-2208-07 0104-2208-08

REAR VIEW

TOP VIEW

LAVERTY TC-4 MSRP

$889.99

toll free / 1-800-421-7247 online / www.helmethouse.com

LAVERTY Sizes

TC-4

XS S M L XL 2XL

0104-1604-03 0104-1604-04 0104-1604-05 0104-1604-06 0104-1604-07 0104-1604-08

Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc

13


WHEN MILLISECONDS COUNT

14

REAR VIEW

MARQUEZ BLACK CONCEPT (Matte)

MSRP

MARQUEZ BLACK CONCEPT TC-1

$889.99

Sizes

TC-1

XS S M L XL 2XL

0104-2101-03 0104-2101-04 0104-2101-05 0104-2101-06 0104-2101-07 0104-2101-08

Includes Pinlock® Shield & Lens TOP VIEW

REAR VIEW

MARQUEZ 5 (Matte)

MARQUEZ 5 TC-1

Sizes

TC-1

XS S M L XL 2XL

0104-2001-03 0104-2001-04 0104-2001-05 0104-2001-06 0104-2001-07 0104-2001-08

MSRP

$889.99

TOP VIEW

Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc

toll free / 1-800-421-7247 online / www.helmethouse.com


WHEN MILLISECONDS COUNT

BRINK TC-2

BRINK TC-1

BRINK TC-5

BRINK TC-10

BRINK

MSRP

$859.99

REAR VIEW

TOP VIEW

Sizes

TC-1

TC-2

TC-5

TC-10

XS S M L XL 2XL

0104-1901-03 0104-1901-04 0104-1901-05 0104-1901-06 0104-1901-07 0104-1901-08

0104-1902-03 0104-1902-04 0104-1902-05 0104-1902-06 0104-1902-07 0104-1902-08

0104-1905-03 0104-1905-04 0104-1905-05 0104-1905-06 0104-1905-07 0104-1905-08

0104-1910-03 0104-1910-04 0104-1910-05 0104-1910-06 0104-1910-07 0104-1910-08

Includes Pinlock® Shield & Lens Fog Resistant System

REAR VIEW

MARQUEZ MOTEGI 2

MARQUEZ MOTEGI 2 TC-1

MSRP

$889.99 TOP VIEW

Sizes

TC-1

XS S M L XL 2XL

0104-1801-03 0104-1801-04 0104-1801-05 0104-1801-06 0104-1801-07 0104-1801-08

toll free / 1-800-421-7247 online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc

15


16

Form & Function Redefined GT-AIR II DESIGN CONCEPT Released in 2013, as SHOEI’s premium touring full-face helmet with an internal sun shield, the original SHOEI GT-Air established this type of helmet as a functional and stylish alternative appreciated by many riders, owing to its convenience and aggressive, refined design. SHOEI has now released the all-new GT-Air II, a helmet that evolves the GT-Air’s functionality, performance, and design primarily for touring use to a new, higher level of experience. The SHOEI GT-Air II integrates the optional SENA SRL 2 Bluetooth communication system seamlessly into the concept of this helmet. The GT-Air II is also equipped with a CNS-1 face shield and baseplate system; allowing the face shield to open slightly more in its “cracked open” position to reduce fogging of the shield at low speed. The GT-Air II also uses an all-new extended QSV-2 inner sun shield for improved coverage of the rider’s face in bright sunny conditions. Inheriting the functionality, performance, and design of the GT-Air, the GT-Air II further enhances the performance of the internal sun shield, full-face helmet.

AIM SHELL CONSTRUCTION

• Light Weight & Optimum Rigidity

Utilizing a multilayered structure of strong glass fiber and organic fibers, SHOEI’s AIM (Advanced Integrated Matrix) shell construction ensures a high-performance shell structure designed exclusively by SHOEI. AIM shell construction makes for a helmet that is light weight, yet rigid in elasticity. The GT-Air II offers proprietary technology that integrates a multi-ply matrix specifically designed to meet DOT standards. SHOEI is uncompromising in their position to maintain a uniform level of safety with every one of their products, while pursuing optimum shell rigidity and lighter weight.

UPDATED CNS-1 SHIELD & QSV-2 SUN SHIELD CNS-1 Shield

QR-N Shield Base ©2019 Helmet House, Inc

• Improved Performance

The GT-Air uses the proven SHOEI CNS-1 face shield. The base plates for this face shield have been redesigned for improved opening performance in the “cracked open” position. Based on SHOEI’s landmark QR-N base plate, this updated design adds a new opening position for keeping the shield slightly more open in this first open (or “cracked open”) position, thus giving a rider more ventilation options. The gear teeth of the base plate have been redesigned to make the face shield’s first open position have a taller opening, improving ventilation to a rider’s face in foggier, moist conditions. The GT-Air II’s redesigned base plate also moves the face shield’s attachment point back on the shell, positioning the shield closer to the rear of the helmet. This new location adds a gap between the rear edge of the baseplate and the indentation on the attachment. This design change improves the shield’s adjustment range, and makes opening and closing the face shield easier for the rider. The GT-Air II includes a built-in sun shield, the QSV-2. The sun shield tucks neatly away beneath a non-intrusive shell built into the helmet’s liner and can be lowered with the easy control of a sliding switch.


17

PINLOCK® FOG RESISTANT SYSTEM A Pinlock® EVO lens comes as standard equipment on the GT-Air II to help prevent shield fogging. This anti-fog lens system ensures a clear field of vision, even when riding in high humidity and/or cold weather.

HYBRID INTERIOR DESIGN

Lens Included

• More Rider Comfort

The GT-Air II’s interior uses a hybrid fabric construction offering both a moisture-absorbent, quick-drying material and soft-raised fabric. The moisture-absorbent, quick-drying material is located in area that contact a rider’s cheeks and brow where sweat tends to stick while riding. Soft, raised fabric is located where a rider’s skin tends to rub when wearing or removing the helmet. This design update offers improved rider comfort. Red stitching is used on the leather areas on the bottom of the GT-Air II cheek pads. Red stitching is also used on the leather and mesh fabric areas on both sides of the eye port, accentuating the design. SHOEI’s stainless steel Micro Ratchet Chinstrap offers quick and secure closure.

SENA® SHOEI RIDER LINK (SRL2)

SHOEI® Micro Ratchet Chin Strap

• Bluetooth Communication System

Based on the exclusive SHOEI RIDER LINK (SRL) system designed for the SHOEI NEOTEC II by SENA, the new SRL2 Bluetooth communication system has been developed specifically to integrate with the GT-Air II. For the GT-Air II, a wired microphone is utilized for the communication system, which connects to the SRL2’s connection socket. Similar to the original SRL system, the GT Air II’s system is equipped with an attachment base that integrates easily with the helmet’s shell design and the GT Air II integrated wire routing channels throughout the helmet. This design makes the SRL2 easy to install and to charge the unit.The SRL 2 offers long battery life and talk time, SPEAKERS Bluetooth 4.1 technology, advanced noise control, and a built-in FM radio with 10 presets and automatic scanning for convenient connectivity while riding. SRL2 may also be controlled via a smartphone app available from the Apple App store or MICROPHONE The Google Play Store. Please see pages 60-61 of this catalog CONTROL for more information and available accessories. BUTTONS

EMERGENCY QUICK RELEASE SYSTEM (EQRS) The GT-Air II also utilizes SHOEI’s EQRS (Emergency Quick Release System) which allows emergency medical personnel to easily remove the cheek pads from the helmet of a rider involved in an accident, making the helmet more removable in emergencies.

3

The GT-Air II is available in six sizes (XS-2XL) using three shell sizes to optimize both the fit for the rider and stability of the helmet at speed.

SHELL SIZES XS-XXL

DOT

APPROVED

©2019 Helmet House, Inc

HELMET SIZE

XS

SM

SHELL

MD

MD

EPS LINER

S

LG

XL

2XL

LG

XL

MD

LG

XL

CENTER PAD

S13

S9

M9

L9

XL9

XL5

CHEEK PAD

39

35

35

35

35

31


FORM AND FUNCTION REDEFINED

18

®

FU L L -FA CE H ELMET FEATURES

Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Multi-Piece, Multi-Density EPS liner enhances impact absorption and ventilation • Three shell and four EPS liner sizes provide increased fit options that help to comfortably fit most head sizes • Shell integrated spoiler reduces drag and lift, as well as reduces fatigue to rider’s neck while riding at high speed Sun Shield System • Built-in QSV-2 sun shield gives riders instant relief from sun glare in one quick motion • Sun shield meets ANSI Z80.3-2010 standard for non-prescription eyeglasses • Large and easy to reach switch activates the 3D injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays • New locking mechanism holds the visor firmly in place in the down position for easier removal/installation Ventilation System • Redesigned upper air intake shutter draws in more fresh, cooling air • Enlarged lower air intake opening allows greater airflow into the chin bar area • Large lower and upper vent shutters for ease of use with riding gloves • Three (3) intake and six (6) exhaust vents • Wind-tunnel optimized to maximize airflow and improve negative air pressure exhaust suction Multi-Ply Matrix AIM Shell • Proprietary technology integrates a multi-ply matrix specifically designed to meet DOT standards • Hand-laid interwoven layers of fiberglass with organic fibers and resin • Shell-integrated spoiler with consistent shell thickness ensures proper strength and weight 3-D Max Dry Interior System • Fully removable, washable, replaceable, and adjustable • Exclusive Max-Dry material absorbs and dissipates sweat two times faster than traditional nylon • Three-dimensionally shaped to match the contours of a rider’s head • Multi-layer cheek pads for improved comfort and helmet stabilization • Optional interior components available in different sizes for a customizable fit SENA SRL2 Bluetooth Communication System Compatible See pages 77-78 for full information on this fully integrated comm system engineered for the GT-Air II. SENA SRL2 COMMUNICATION SYSTEM Part# 0501-0000-02 MSRP

$299.00 TECHNICAL INFORMATION Standards: DOT-218 Construction: AIM (Advanced Integrated Matrix) Shell Weight: 3.64 lbs/1649 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, 6 per master carton Please Note: Replacement parts for these helmets may be found on page 70.

SILVER

MSRP

$599.00

REAR VIEW

TOP VIEW

Micro Ratchet Chin Strap • Patent-pending 100% stainless steel interlocking mechanism • Quick and smooth closure and release • Comfortable and easily adjustable CNS-1 Shield System • The CNS-1, three-dimensionally curved shield offers a wider and taller field of vision • Comes equipped with a Pinlock® EVO fog-resistant system • New airtight window beading drains/prevents water from entering helmet • Scratch resistant shield coating • 99.9% protection from harmful UV A&B rays REPLACEMENT SHIELDS & LENSES CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear 0209-9800-00 CNS-1 Shield Clear w/Pinlock® Pins 0217-9100-00 QSV-2 Sun Visor HD Yellow 0219-9003-00 QSV-2 Sun Visor Smoke 0219-9005-00 SHOEI SHELF TALKER GT-AIR II® Part# 02-862 Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


FORM AND FUNCTION REDEFINED

BLACK

WHITE

BRILLIANT YELLOW

MATTE BLUE

MATTE BLACK

MATTE DEEP GREY

®

F UL L -FACE HEL MET METALLICS & MATTE

SOLIDS Sizes

Black

White

Sizes

Silver

Brilliant Yellow

Matte Blue

Matte Black

Matte Deep Grey

XS S M L XL 2XL

0119-0105-03 0119-0105-04 0119-0105-05 0119-0105-06 0119-0105-07 0119-0105-08

0119-0109-03 0119-0109-04 0119-0109-05 0119-0109-06 0119-0109-07 0119-0109-08

XS S M L XL 2XL

0119-0107-03 0119-0107-04 0119-0107-05 0119-0107-06 0119-0107-07 0119-0107-08

0119-0123-03 0119-0123-04 0119-0123-05 0119-0123-06 0119-0123-07 0119-0123-08

0119-0132-03 0119-0132-04 0119-0132-05 0119-0132-06 0119-0132-07 0119-0132-08

0119-0135-03 0119-0135-04 0119-0135-05 0119-0135-06 0119-0135-07 0119-0135-08

0119-0137-03 0119-0137-04 0119-0137-05 0119-0137-06 0119-0137-07 0119-0137-08

SHOEI SHELF TALKER GT-AIR II® Part# 02-862

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc

19


FORM AND FUNCTION REDEFINED

20

CONJURE TC-7

TOP VIEW

®

Sizes XS S M L XL 2XL

CONJURE TC-9 (Matte) MSRP

$699.00

CONJURE

TC-7 0119-1207-03 0119-1207-04 0119-1207-05 0119-1207-06 0119-1207-07 0119-1207-08

TC-9 0119-1209-03 0119-1209-04 0119-1209-05 0119-1209-06 0119-1209-07 0119-1209-08

REAR VIEW

Includes Pinlock® Shield & Lens

CROSSBAR TC-3

CROSSBAR TC-5 (Matte)

CROSSBAR TC-10 (Matte) ®

Sizes XS S M L XL 2XL

CROSSBAR TC-1 MSRP

$699.00

TC-1 0119-1101-03 0119-1101-04 0119-1101-05 0119-1101-06 0119-1101-07 0119-1101-08

CROSSBAR

TC-3 0119-1103-03 0119-1103-04 0119-1103-05 0119-1103-06 0119-1103-07 0119-1103-08

TC-5 0119-1105-03 0119-1105-04 0119-1105-05 0119-1105-06 0119-1105-07 0119-1105-08

TC-10 0119-1110-03 0119-1110-04 0119-1110-05 0119-1110-06 0119-1110-07 0119-1110-08

toll free / 1-800-421-7247 REAR VIEW

TOP VIEW

online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc


FORM AND FUNCTION REDEFINED

TOP VIEW

REDUX TC-6 MSRP

$699.00 REDUX TC-1 Right Side

REAR VIEW

REDUX TC-1 (Matte)

REDUX TC-2 (Matte)

REDUX TC-3 (Matte)

REDUX TC-5 (Matte)

®

Sizes XS S M L XL 2XL

Includes Pinlock® Shield & Lens Fog Resistant System

TC-1 0119-1001-03 0119-1001-04 0119-1001-05 0119-1001-06 0119-1001-07 0119-1001-08

REDUX

TC-2 TC-3 TC-5 0119-1002-03 0119-1003-03 0119-1005-03 0119-1002-04 0119-1003-04 0119-1005-04 0119-1002-05 0119-1003-05 0119-1005-05 0119-1002-06 0119-1003-06 0119-1005-06 0119-1002-07 0119-1003-07 0119-1005-07 0119-1002-08 0119-1003-08 0119-1005-08 NOTE: Asymmetric Graphic Helmet graphic varies on each side.

TC-6 0119-1006-03 0119-1006-04 0119-1006-05 0119-1006-06 0119-1006-07 0119-1006-08

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 70. ©2019 Helmet House, Inc

21


®

22

The Ev ol u t i on o f Per fecti o n Since its introduction with the RF-102, SHOEI’s RF series has evolved through significant changes as a leading sport model helmet. Years of development, wind tunnel testing, and on-track rider feedback have contributed greatly to this model’s growth. It is with great pride and confidence that we present the SHOEI RF-1200®.

Slim & Light One of the most important features of a quality helmet is that you hardly know it’s there protecting your head. SHOEI has reduced the weight of the RF-1200® by using a slimmer design and building a distinct line into the side of the helmet that also serves as an accent. As a result, the SHOEI RF-1200® is lighter than any other Snell certified helmet in the current SHOEI lineup.

Shell Construction The slim design of the SHOEI RF-1200®, with its distinct accent cut line, widens the bottom of the helmet to help ease the process of putting the helmet on or off. Further advancing the comfort of the AIM+ shell is the industry leading four shell sizes that the SHOEI RF-1200® comes in. Extensive wind tunnel testing helps SHOEI realize a practical aerodynamic shape that limits the lift and shake that high speeds commonly create while riding. The slim, aerodynamic design developed through wind tunnel testing lessens the load on the rider’s neck and creates a more comfortable riding experience.

HELMET SIZE

MD

LG

SHELL

XS SM

SM

MD

LG

XL XL

XXL

LINER

SM

MD

LG

XL

The impact-absorbing Dual-Layer/Multi-Density EPS liner consists of two layers incorporating different densities, providing enhanced impact absorption while allowing cooling air to travel unrestricted through tunnels in the EPS. ©2019 Helmet House, Inc


23

FULL-FACE HELMET Quietness The SHOEI RF-1200® has achieved a new level in the reduction of wind noise. Through advancements in the aerodynamic shape, improved interior liners, and an improved shield system, the rider will enjoy a very quiet and comfortable riding experience. The 3D-shaped interior of the RF-1200® has achieved a balance of a comfortably soft fit and a firm, stable hold. The removable cheek pads utilize soft polyurethane foam, covering six layers of hard polyurethane to reduce shaking. The bottom of the cheek pads feature a high volume design, filling in the distinct and aggressive accent line of the shell of the helmet, comfortably forming to the riders neck and blocking wind from entering the helmet. The multi-layer cheek pads also improve the range of motion in the neck, thus helping the rider to check traffic behind him or her.

4

SHELL SIZES XS-XXL

HELMET SIZE

XS

SM

MD

LG

XL

XXL

CHEEK Standard PAD Optional

39mm

35mm

35mm

35mm

35mm

31mm

ALL CHEEK PAD SIZES INTERCHANGEABLE IN ALL HELMET SIZES

NOTE: Optional 43mm cheek pad available

Shield System The RF-1200® features a shield system that continues to offer the rider the best in optical performance. The CWR-1 Pinlock® shield features ribs on the top and bottom of the shield to improve rigidity and eliminate bending of the shield caused by wind pressure or the opening and closing of the shield. Independent beading on the top and sides of the helmet help to keep the seal of the shield tight and eliminate any excess air. In addition to the CWR-1 shield, SHOEI has developed an updated base plate for the RF-1200®. The QR-E base plate is spring-loaded and pulls the shield back onto the helmet’s window beading, sealing it tightly with strengthened springs to guard against wind and rain. The addition of a new fivestage rotating dial allows for fine tuning of the base plate for easy shield sealing adjustments.

Ventilation Rigorous wind tunnel testing and development has resulted in the improved ventilation of the RF-1200®. A large lower three position vent, three upper air intake vents, and four uniquely positioned upper exhaust outlet vents combine with the Dual-Layer/Multi-Density EPS liner to allow cooling air to travel unrestricted through tunnels created in the EPS liner, while also allowing for a more compact, lightweight design. ©2019 Helmet House, Inc


THE EVOLUTION OF PERFECTION

24

FU L L -FACE H ELMET

FEATURES

Multi-Ply Matrix AIM+ Shell • Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2015 and DOT standards • Hand-laid interwoven layers of fiberglass with lightweight organic and high-performance fibers • SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption Ventilation System • Superior ventilation as a result of rigorous wind tunnel testing • Large three-position lower vent, three upper vent intakes, and four uniquely positioned upper exhaust outlet vents 3D Max-Dry System II Interior • Center pad components are three-dimensionally shaped to match contours of the rider’s head, allowing comfortable fit while maintaining a firm hold for high-speed riding • 3D shaped cheek pads available in multiple thicknesses for a custom fit • Max-Dry System II liner material quickly absorbs and dissipates sweat and moisture • E.Q.R.S. (Emergency Quick-Release System) allows emergency medical personnel to easily remove cheek pads from an injured rider’s helmet • Chin curtain and breath guard included

TECHNICAL INFORMATION Standards: Snell M2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi-Ply) Weight: 3.46 lbs / 1570 grams (approx, based on size Medium Solid Color) Packaging: Individually wrapped, bagged, and boxed, six per master carton

SOLIDS MSRP

$485.99 MATTES & METALLICS MSRP

LIGHT SILVER

$498.99

CWR-1 Shield System • Shield features ribs along the top and bottom to improve rigidity and eliminate bending from wind pressure during opening and closing • Improved window beading features dual-layered dual lip construction that ensures a windproof and waterproof seal with every closure • Locking mechanism easily engages the shield lock when fully closed • Pinlock® pins and EVO fog resistant lens insert included QR-E Base Plate System • Facilitates quick and smooth shield changes • SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal • Strengthened springs for more precise functionality • All-new five-stage rotating dial for shield/base plate fine-tuning Standard Chin Strap Snap • Neatly secures chin strap

Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 71. ©2019 Helmet House, Inc


THE EVOLUTION OF PERFECTION

BLACK

WINE RED

WHITE

BLACK METALLIC

ANTHRACITE METALLIC

SHINE RED

BRILLIANT YELLOW

MATTE BLACK

MATTE DEEP GREY

F UL L -FACE HEL MET SOLIDS

MATTES & METALLICS

Sizes

Black

White

Light Silver

XS S M L XL 2XL

0109-0105-03 0109-0105-04 0109-0105-05 0109-0105-06 0109-0105-07 0109-0105-08

0109-0109-03 0109-0109-04 0109-0109-05 0109-0109-06 0109-0109-07 0109-0109-08

0109-0107-03 0109-0107-04 0109-0107-05 0109-0107-06 0109-0107-07 0109-0107-08

Wine Red

Black Metallic

Anthracite Metallic

Brilliant Yellow

Shine Red

Matte Black

Matte Deep Grey

0109-0111-03 0109-0111-04 0109-0111-05 0109-0111-06 0109-0111-07 0109-0111-08

0109-0115-03 0109-0115-04 0109-0115-05 0109-0115-06 0109-0115-07 0109-0115-08

0109-0117-03 0109-0117-04 0109-0117-05 0109-0117-06 0109-0117-07 0109-0117-08

0109-0123-03 0109-0123-04 0109-0123-05 0109-0123-06 0109-0123-07 0109-0123-08

0109-0131-03 0109-0131-04 0109-0131-05 0109-0131-06 0109-0131-07 0109-0131-08

0109-0135-03 0109-0135-04 0109-0135-05 0109-0135-06 0109-0135-07 0109-0135-08

0109-0137-03 0109-0137-04 0109-0137-05 0109-0137-06 0109-0137-07 0109-0137-08

REPLACEMENT SHIELDS & LENSES CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear CWR-1 Shield Clear w/Pinlock® Pins CWR-1 Shield Hi-Def Yellow w/Pinlock® Pins CWR-1 Shield Dk. Smoke w/Pinlock® Pins CWR-1 Shield Hi-Def Orange w/Pinlock® Pins CWR-1 Shield Lt. Smoke w/Pinlock® Pins CWR-1 Shield Mellow Smoke w/Pinlock® Pins CWR-1 Spectra Blue w/Pinlock® Pins CWR-1 Spectra Chrome w/Pinlock® Pins CWR-1 Spectra Gold w/Pinlock® Pins CWR-1 Shield Photochromic

0209-9800-00 0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9402-00 0209-9407-00 0209-9413-00 0209-9755-00

SHOEI SHELF TALKER RF-1200® Part# 02-852

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 71. ©2019 Helmet House, Inc

25


THE EVOLUTION OF PERFECTION

26

RUMPUS TC-2

RUMPUS TC-4

RUMPUS TC-5 (Matte)

RUMPUS RUMPUS TC-10

MSRP

$589.99

Sizes

TC-2

TC-4

TC-5

TC-10

XS S M L XL 2XL

0109-3702-03 0109-3702-04 0109-3702-05 0109-3702-06 0109-3702-07 0109-3702-08

0109-3704-03 0109-3704-04 0109-3704-05 0109-3704-06 0109-3704-07 0109-3704-08

0109-3705-03 0109-3705-04 0109-3705-05 0109-3705-06 0109-3705-07 0109-3705-08

0109-3710-03 0109-3710-04 0109-3710-05 0109-3710-06 0109-3710-07 0109-3710-08

REAR VIEW

PHILOSOPHER TC-1

PHILOSOPHER TC-5

PHILOSOPHER

PHILOSOPHER TC-2 MSRP

$589.99

Includes Pinlock® Shield & Lens

PHILOSOPHER TC-3 (Matte)

REAR VIEW

Sizes

TC-1

TC-2

TC-3

TC-5

XS S M L XL 2XL

0109-3601-03 0109-3601-04 0109-3601-05 0109-3601-06 0109-3601-07 0109-3601-08

0109-3602-03 0109-3602-04 0109-3602-05 0109-3602-06 0109-3602-07 0109-3602-08

0109-3603-03 0109-3603-04 0109-3603-05 0109-3603-06 0109-3603-07 0109-3603-08

0109-3605-03 0109-3605-04 0109-3605-05 0109-3605-06 0109-3605-07 0109-3605-08

toll free / 1-800-421-7247 online / www.helmethouse.com

©2019 Helmet House, Inc

Please Note: Replacement parts for these helmets may be found on page 71.


THE EVOLUTION OF PERFECTION

REAR VIEW

DEDICATED TC-5 (Matte) Right View

DEDICATED

NOTE: Assymetric graphic. Right and left side of helmet are different.

DEDICATED TC-5 (Matte) Left View

MSRP

$589.99

Sizes

TC-5

XS S M L XL 2XL

0109-3905-03 0109-3905-04 0109-3905-05 0109-3905-06 0109-3905-07 0109-3905-08

FRONT VIEW

REAR VIEW

HARMONIC

HARMONIC TC-7 HARMONIC TC-2

MSRP

Sizes

TC-2

TC-7

XS S M L XL 2XL

0109-3802-03 0109-3802-04 0109-3802-05 0109-3802-06 0109-3802-07 0109-3802-08

0109-3807-03 0109-3807-04 0109-3807-05 0109-3807-06 0109-3807-07 0109-3807-08

$589.99

RIGHT SIDE

REAR VIEW

LEFT SIDE MSRP

$626.99

MARQUEZ POWER UP! TC-1

MARQUEZ POWER UP!

Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com

FRONT VIEW

Please Note: Replacement parts for these helmets may be found on page 71.

Sizes

TC-1

XS S M L XL 2XL

0109-3201-03 0109-3201-04 0109-3201-05 0109-3201-06 0109-3201-07 0109-3201-08

©2019 Helmet House, Inc

27


THE EVOLUTION OF PERFECTION

28

INCISION TC-5 TOP VIEW

MSRP

INCISION TC-1

$589.99

REAR VIEW

INCISION TC-6

INCISION Sizes

TC-1

TC-5

TC-6

XS S M L XL 2XL

0109-3401-03 0109-3401-04 0109-3401-05 0109-3401-06 0109-3401-07 0109-3401-08

0109-3405-03 0109-3405-04 0109-3405-05 0109-3405-06 0109-3405-07 0109-3405-08

0109-3406-03 0109-3406-04 0109-3406-05 0109-3406-06 0109-3406-07 0109-3406-08

TROOPER TC-1 (Matte)

TOP VIEW

Includes Pinlock® Shield & Lens TROOPER TC-10 MSRP

REAR VIEW

TROOPER Sizes

TC-1

TC-10

XS S M L XL 2XL

0109-3501-03 0109-3501-04 0109-3501-05 0109-3501-06 0109-3501-07 0109-3501-08

0109-3510-03 0109-3510-04 0109-3510-05 0109-3510-06 0109-3510-07 0109-3510-08

$589.99

RECOUNTER TC-5 (Matte) TOP VIEW

RECOUNTER

RECOUNTER TC-10 MSRP

$589.99 ©2019 Helmet House, Inc

REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

Sizes

TC-5

TC-10

XS S M L XL 2XL

0109-3305-03 0109-3305-04 0109-3305-05 0109-3305-06 0109-3305-07 0109-3305-08

0109-3310-03 0109-3310-04 0109-3310-05 0109-3310-06 0109-3310-07 0109-3310-08

Please Note: Replacement parts for these helmets may be found on page 71.


THE LEGACY OF PERFECTION

®

FULL-FACE HELMET Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel and professional riders’ feedback • Dual-Layer EPS liner enhances impact absorption and ventilation • A third generation Tail Fin, integrated into the bottom rear beading in combination with the Shell-Integrated Spoiler, allows smooth airflow that reduces drag and lift Variable Ventilation System • Upper air intake vent is positioned to maximize air volume into the helmet’s interior • Top outlet vent is separate from the ShellIntegrated Spoiler, allowing it to be positioned for optimum flow-through ventilation • Four rear outlet vents allow for adjustment of airflow based on riding position • Enlarged lower air intake/defroster vent reduces MATTE shield fogging and increases ventilation BLACK • The rear/neck outlets allow for effective air exhaust Lightweight Advanced Integrated Matrix Plus (AIM+) • High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid, and resilient Interior System • The entire interior lining (cheek pads, crown liner, and chin strap covers) is easily removed to allow cleaning • Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit, and comfort • Eyeglass compatible interior MATTE BLACK • Breath guard and chin curtain included MSRP • Optional ear pads and optional cheek pad sizes available $501.99 Standard Chin Strap Snap BLACK • Neatly secures chin strap MSRP CW-1 Shield and Q.R.S.A. System $477.99 • Q.R.S.A. base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures Compatible with a proper seal • The CW-1, three-dimensionally curved Fog Resistant System shield is both wider and taller than the CX-1V it replaces BLACK • Optional, Pinlock®-ready CWF-1 two-dimensional racing shields with tear-off posts are available • Scratch-resistant coating ® • 99.9% protection from harmful UV A & B rays Sizes: Black Matte Black • Optional, CW-1 Pinlock® prepared shields are available to accommodate Pinlock EVO® 3XL 0113-0105-09 0113-0135-09 Fog Free Inserts • Optional tinted shields available • A pre-set lever can easily lock the shield in place to prevent the shield from opening REPLACEMENT SHIELDS & LENSES unexpectedly, as well as prop the shield open to increase airflow CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear 0209-9800-00 CW-1 Shield Hi-Def Orange 0213-9106-00 TECHNICAL INFORMATION CW-1 Clear Shield w/Pinlock® Pins 0213-9400-00 Standards: Snell M2015, DOT-218 CW-1 Shield Hi Def Yellow w/Pinlock® Pins 0213-9403-00 0213-9405-00 CW-1 Shield Dk. Smoke w/Pinlock® Pins Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) CW-1 Shield Lt. Smoke w/Pinlock® Pins 0213-9415-00 CWF-1 Pinlock® Shield w/Tearoff Posts Clear 0213-9500-00 Weight: 3.9 lbs / 1770 grams (approx) CWF-1 Pinlock® Shield w/Tearoff Posts Hi Def Yellow 0213-9503-00 Packaging: Individually wrapped, bagged, and CWF-1 Pinlock® Shield w/Tearoff Posts Dk Smoke 0213-9505-00 boxed, six per master carton

AVAILABLE IN 3XL SIZE ONLY

toll free / 1-800-421-7247 online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on page 74.

©2019 Helmet House, Inc

29


®

30

STREAMLINED FUNCTION

TECHNOLOGY 1 DESIGN CONCEPT • Advanced, short-distance street performance and long-distance touring comfort • Compact, aerodynamic shell design with sharp and aggressive styling • Optimal shell aerodynamics and liner components reduce unwanted road noise • Matte black ventilation components enhance aggressive styling • Streamlined function and affordability

2 VENTILATION PERFORMANCE • Large lower vent shutter for ease of use with riding gloves • Two upper air vents for optimal air intake • Two uniquely positioned upper exhaust vents for improved negative pressure suction • Wind-tunnel optimized to balance enhanced airflow and silence

3 CWR-1 SHIELD

• Protects from 99% of the sun’s damaging UV rays • 3D injection molding ensures distortion-free view throughout the entire field of vision • Innovative ribs on top and bottom edge improve rigidity and eliminate bending • Advanced shield locking mechanism • Comes equipped with Pinlock® EVO fog-resistant system

4 QR-E BASE PLATE SYSTEM • Facilitates quick and smooth shield changes • SHOEI’s patented spring-loaded technology ensures a wind and waterproof shield • Strengthened springs for more precise functionality • Innovative five-stage rotating dial for shield/base plate fine-tuning

©2019 Helmet House, Inc

1

2

3

4


31

FULL-FACE HELMET

MULTI-PLY MATRIX AIM+ SHELL

EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)+

• Proprietary technology integrates a multi-ply matrix specifically designed to meet SNELL M2015 and DOT standards • Hand-laid interwoven layers of fiberglass with lightweight organic and high-performance fibers • SHOEI’s strongest, lightest and most elastic shell provides optimal impact absorption

DUAL-LAYER / MULTIDENSITY EPS LINER

INTERIOR COMFORT SYSTEM

• Provides enhanced impact absorption by utilizing varying densities of foam • Allows cooling air to travel unrestricted through tunnels created in the EPS • Precise placement of multi-density EPS material yields a more compact, lightweight design HELMET SIZE XS

LG

XL XXL

SHELL

SM

MD

LG

XL

EPS LINER

SM

MD

LG

MASK LINER

SM MD

MD

XL LG

4

• Allows emergency medical personnel to safely remove the cheek pads from an injured rider’s helmet • Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck

• Fully removable, washable, replaceable and adjustable • Three-dimensionally shaped to match the contours of a rider’s head • Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization

SHELL SIZES XS-XXL

HELMET SIZE

OPT

XS

SM

MD

LG

XL

XXL

CENTER PAD

S17

S13

S9

M9

L9

XL9

XL5

CHEEK PAD

43mm

39mm

35mm

35mm

35mm

35mm

31mm

©2019 Helmet House, Inc


STREAMLINED FUNCTION

32

®

FU L L -FA C E H ELMET

FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders’ feedback • Dual-Layer, Multi-Density EPS liner enhances impact absorption and ventilation WHITE • Four shell and EPS liner sizes present increased fit options that help to comfortably fit most MSRP head sizes $399.00 Ventilation System • Two upper air intake vents are positioned to REAR maximize air volume into the helmet interior; VIEW hot air is exhausted through top outlet for a more comfortable ride Includes • Lower intake vent absorbs air exhaled from the mouth to help eliminate shield fogging • Breath guard and chin curtain included Fog Resistant System Lightweight, Advanced Multi-Ply Matrix Plus (AIM+) CWR-1 Shield and QR-E System • High performance fiber materials are combined • CWR-1 shield features ribs along the top and bottom with extremely elastic organic fibers into shell to improve rigidity and eliminate bending from wind construction for a structure that is ultra lightweight, pressure during opening and closing rigid, and resilient • Improved window beading features dual-layered dual lip 3D Custom Interior System construction that ensures a windproof and waterproof • The entire interior lining (cheek pads, upper liner, seal with every closure and chin strap covers) can be removed for cleaning, • Locking mechanism easily engages the shield lock center and cheek pads can be replaced with optional when fully closed thicknesses for a customizable fit • Pinlock® pins and EVO fog resistant lens insert included • E.Q.R.S. (Emergency Quick Release System) allows • Spring-loaded base plates offer quick shield changes emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the • Five-stage rotating dial allows fine tuning of the base helmet to be more easily removed from the head plate for easy shield adjustments • Extra comfort provided by removable ear pads, breath • QR-E closure system allows for tool-less shield guard, and chin curtain removal and installation, and provides an air-tight seal intended to significantly minimize wind noise Standard Chin-Strap Snap • Neatly secures chin strap

TECHNICAL INFORMATION Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Weight: 3.49 lbs / 1593 grams (approx. for Size Medium Solid Color) Packaging: Individually wrapped, bagged, and boxed, six per master carton

toll free / 1-800-421-7247 online / www.helmethouse.com

REPLACEMENT SHIELDS & LENSES CWR-1 Shield Clear w/Pinlock® Pins CWR-1 Shield Hi-Def Yellow w/Pinlock® Pins CWR-1 Shield Dk. Smoke w/Pinlock® Pins CWR-1 Shield Hi-Def Orange w/Pinlock® Pins CWR-1 Shield Lt. Smoke w/Pinlock® Pins CWR-1 Shield Mellow Smoke w/Pinlock® Pins CWR-1, CW-1, CNS-1 Pinlock EVO® Lens Clear CWR-1 Spectra Blue w/Pinlock® Pins CWR-1 Spectra Chrome w/Pinlock® Pins CWR-1 Spectra Gold w/Pinlock® Pins CWR-1 Shield Photochromic

Please Note: Replacement parts for these helmets may be found on page 71.

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9800-00 0209-9402-00 0209-9407-00 0209-9413-00 0209-9755-00

©2019 Helmet House, Inc


STREAMLINED FUNCTION

BLACK

TANGERINE ORANGE

MATTE BLUE METALLIC

MATTE BLACK

BASALT GREY

MATTE DEEP GREY

SOLIDS Sizes XS S M L XL 2XL

Sizes XS S M L XL 2XL

Tangerine Orange 0107-0116-03 0107-0116-04 0107-0116-05 0107-0116-06 0107-0116-07 0107-0116-08

Black 0107-0105-03 0107-0105-04 0107-0105-05 0107-0105-06 0107-0105-07 0107-0105-08

White 0107-0109-03 0107-0109-04 0107-0109-05 0107-0109-06 0107-0109-07 0107-0109-08

METALLICS & MATTES

Matte Blue Metallic 0107-0132-03 0107-0132-04 0107-0132-05 0107-0132-06 0107-0132-07 0107-0132-08

Matte Deep Grey 0107-0137-03 0107-0137-04 0107-0137-05 0107-0137-06 0107-0137-07 0107-0137-08

Matte Black 0107-0135-03 0107-0135-04 0107-0135-05 0107-0135-06 0107-0135-07 0107-0135-08

Basalt Grey 0107-0147-03 0107-0147-04 0107-0147-05 0107-0147-06 0107-0147-07 0107-0147-08

SHOEI SHELF TALKER RF-SR Part# 02-856

toll free / 1-800-421-7247 online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on page 71.

©2019 Helmet House, Inc

33


34

®

Experience The Versatility

Design Concept When SHOEI first introduced the NEOTEC in 2011, riders worldwide realized not all modular helmets were created equal. With its lightweight, highly aerodynamic shell, advanced noise reduction, and optimal vision protection, all combined with an ease of use (critical to a modular helmet), SHOEI had indeed achieved new heights in head gear design. But that was just the beginning. Now, with the NEOTEC II, SHOEI has not only improved on already outstanding features, but also introduced design advances to bring their premiere modular design into a whole new era.

Ventilation Performance The NEOTEC II’s improved ventilation system has been wind-tunnel tested for cool air intake and hot air expulsion. Large upper and lower vent shutters offer greater ease of use with gloves. The expanded three-position upper air intake helps increase ventilation performance and adjustability. All-new exhaust outlets flank the upper air intake vents for improved hot air clearance.

Aerodynamics Helmet aerodynamics have been wind tunnel-tested, and optimized to accommodate varying riding positions. The NEOTEC II’s shell-integrated spoiler is now reshaped and repositioned to further reduce lift and drag. The helmet’s top air outlet also serves as a spoiler when riding in the upright position. Chin bar aerodynamics are improved by the newlydesigned “Aero Deflector”.

Micro Ratchet Chin Strap The Micro Ratchet Chin Strap is a 100% stainless steel interlocking mechanism which offers quick and smooth closure and opening, comfort, and is easily adjustable.

Noise Reduction

The NEOTEC II’s enhanced shell shape has been designed to improve noise control. A new airtight window bead, along with the face cover’s “Vortex Generator” lip, help reduce noise and manage overall airflow. SHOEI also developed new “Noise Isolator” cheekpads that deflect wind, as well as reduce unwanted noise. NOTE: Optional cheek pads without noise isolator available — see page 71.

CNS-3 Shield System The newly-designed CNS-3 shield comes equipped with the Pinlock® EVO fog-resistant system, protects from 99% of the sun’s damaging UV rays, and provides improved air/water sealing and noise reduction. 3D injection molding ensures a distortion-free view throughout the entire field of vision. The incorporated base plate system facilitates smooth and easy shield changes. Includes Pinlock® Shield & Lens

©2019 Helmet House, Inc


35

Flip-Up Face Cover The NEOTEC II’s Flip-Up Face Cover is designed to convert instantly from a full-face to an open-face configuration with the simple push of a large lock release button located at the chin. The Face Cover holds firmly in the open position with the help of the all-new 360º Pivot Locking System, which assures a safe, secure closure when the cover is in the down, locked position. Lightweight Face Cover/face shield rotate with smooth precision on a variable eccentric axis, yielding the seamless versatility of a two-in-one design. 360º Pivot Locking System

QSV-1 Internal Sun Shield SHOEI’s NEOTEC II includes a built-in QSV-1 sun shield that offers instant relief from sun glare with the use of a large, easily located switch. The distortion-free view blocks 99% of the sun’s damaging UV rays, and exceeds ANSI Z80.3-2010 standards for non-prescription eyewear. The helmet’s outer shell forehead area is raised slightly to accommodate the internal sun shield. This allows the integrity of the helmet’s inner EPS liner to remain intact.

Multi-Piece EPS Liner The NEOTEC II’s EPS liner provides enhanced impact absorption by utilizing varying densities of foam. Cooling air is allowed to travel unrestricted through tunnels in the EPS. Precise placement of multi-density EPS material yields a more compact, lightweight design.

Interior Comfort System The removable interiors of the NEOTEC II are three-dimensionally shaped to match the contours of a rider’s head, with multi-layer cheek pads for improved comfort and helmet stabilization. All interiors are adjustable, washable, and replaceable. The “Noise Isolator” cheek pads have been developed to help deflect wind and reduce noise.

4DOT

SHELL SIZES S-XL

HELMET SIZE

XS

SHELL

SM SM

EPS LINER

XS

SM

SIDE LINER

XS

SM

MD

LG

MD

LG

MD

LG

XL

2XL XL XL

LG

APPROVED

HELMET SIZE

XS

SM

MD

LG

XL

2XL

CHEEK PAD SIZE

35mm

35mm

35mm

35mm

35mm

31mm

CTR PAD SIZE

XS9

S9

M9

L9

XL9

XL5

Intercom-Ready Design The NEOTEC II has been designed to integrate seamlessly with the SENA® SRL Bluetooth Communication System, which in turn has been developed specifically for use with this helmet, and is sold exclusively by SENA. The system also allows riders to use their smart phones, for communication, navigation, and music listening while riding. Please see pages 60-61 of this catalog for more information and available accessories for SENA® SRL comm system. ©2019 Helmet House, Inc


EXPERIENCE THE VERSATILITY

36 ®

M O D U LA R H ELMET

FEATURES Aerodynamic Shell Design • Aerodynamic properties are maximized through extensive wind tunnel testing • Multi-piece EPS liner enhances impact absorption and ventilation • Four shell sizes and five EPS liners present increased fit options that help to comfortably fit most head sizes from XS through XXL • SHOEI’s exclusive, state-of-the-art shell forming technology incorporates the aerodynamic advantages of a spoiler right into the shell of the NEOTEC® II Flip-Up Face Cover and Face Shield • SHOEI’s proven 360º Pivot Locking System, made of high quality stainlees steel components, ensures a safe and secure closure • Enlarged single-button release for chin bar and shield allows ease of use with riding gloves • Opening the face cover up will automatically close the face shield Sun Shield Visor System • Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion • Visor meets ANSI Z80.3-2010 standard for non-prescription eyeglasses • Large and easy to reach slide switch activates the 3D injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays • Forehead area of the outer shell is raised slightly to accommodate the internal sun shield. This allows the integrity of the helmet’s inner EPS liner to remain intact Ventilation System • SHOEI’s wind tunnels helped to reveal the optimal balance between airflow and silence • Large lower vent shutter for ease of use with riding gloves optimizes air flow while in the riding position • All-new exhaust outlets flank adjustable upper air intake for improved hot-air expulsion Micro Ratchet Chin Strap • Patent-pending 100% stainless steel interlocking mechanism • Quick and smooth closure and release • Comfortable and easily adjustable Noise Reduction • All-new “Noise Isolator” cheek pads deflect wind and reduce unwanted noise • New airtight window bead and the face cover’s “Vortex Generator” lip reduce noise and manage airflow around the helmet • Enhanced shell shape improves noise control and aerodynamics NOTE: Optional cheekpads without noise isolator available — see page 72. SHOEI REPLACEMENT SHIELD Pinlock® EVO Lens Insert - Clear Part# 0209-9800-00 CNS-3 Pinlock Shield Clear Part# 0216-9100-00

WHITE MSRP

$699.00

REAR VIEW

3D Interior Liner System • The entire interior liner (cheek pads, center pads, and chin strap covers) is easily removed for cleaning or replacement • Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit, and comfort • Comfortable, 3D helmet liner material quickly dissipates moisture • Eyeglass compatible interior is optimized for many different sizes of eyeglasses, while still minimizing gaps that can cause excess interior noise CNS-3 Shield and Base Plate System • All-new design provides approved air/water sealing and noise reduction • Protects from 99% of the sun’s damaging UV rays • 3D injection-molding ensures distortion-free view throughout the entire field of vision • CNS-3 base plate system facilitates smooth and easy shield changes and a wind and waterproof seal • New airtight window beading drains and prevents water from entering the helmet • Comes equipped with a Pinlock® EVO fog-resistant system • New shell design improves noise control and aerodynamics SENA SRL2 Bluetooth Communication System Compatible See pages 77-78 for full information on this fully integrated comm system engineered for the NEOTEC II. SENA SRL COMMUNICATION SYSTEM Part# 0501-0000-01 MSRP

$299.00 Standards: Construction: Weight: Packaging:

TECHNICAL INFORMATION DOT-218 AIM (Advanced Integrated Matrix) materials 4.09 lbs / 1855 grams (approx. for Size Medium Solid Color) Individually wrapped, bagged, and boxed, six per master carton Includes Pinlock® Shield & Lens

SHOEI SHELF TALKER NEOTEC II Part# 02-847 Please Note: Replacement parts for these helmets may be found on page 71.

©2019 Helmet House, Inc


EXPERIENCE THE VERSATILITY

LIGHT SILVER

BLACK

WINE RED

MATTE BLUE METALLIC

ANTHRACITE METALLIC

MATTE DEEP GREY

MATTE BLACK

®

SOLIDS Sizes XS S M L XL 2XL

Black 0116-0105-03 0116-0105-04 0116-0105-05 0116-0105-06 0116-0105-07 0116-0105-08

White 0116-0109-03 0116-0109-04 0116-0109-05 0116-0109-06 0116-0109-07 0116-0109-08

METALLICS & MATTES Sizes XS S M L XL 2XL

Light Silver 0116-0107-03 0116-0107-04 0116-0107-05 0116-0107-06 0116-0107-07 0116-0107-08

Wine Red 0116-0111-03 0116-0111-04 0116-0111-05 0116-0111-06 0116-0111-07 0116-0111-08

Anthracite Metallic 0116-0117-03 0116-0117-04 0116-0117-05 0116-0117-06 0116-0117-07 0116-0117-08

Matte Blue Metallic 0116-0132-03 0116-0132-04 0116-0132-05 0116-0132-06 0116-0132-07 0116-0132-08

Matte Black 0116-0135-03 0116-0135-04 0116-0135-05 0116-0135-06 0116-0135-07 0116-0135-08

Matte Deep Grey 0116-0137-03 0116-0137-04 0116-0137-05 0116-0137-06 0116-0137-07 0116-0137-08

Includes Pinlock® Shield & Lens

toll free / 1-800-421-7247 online / www.helmethouse.com Please Note: Replacement parts for these helmets may be found on page 71.

©2019 Helmet House, Inc

37


EXPERIENCE THE VERSATILITY

38

FRONT VIEW

SPLICER TC-2 (Matte) MSRP

REAR VIEW

$799.00

SPLICER TC-6 (Matte)

SPLICER TC-8

®

Sizes XS S M L XL 2XL

Includes Pinlock® Shield & Lens Fog Resistant System

SPLICER

TC-2 0116-1102-03 0116-1102-04 0116-1102-05 0116-1102-06 0116-1102-07 0116-1102-08

TC-6 0116-1106-03 0116-1106-04 0116-1106-05 0116-1106-06 0116-1106-07 0116-1106-08

TC-8 0116-1108-03 0116-1108-04 0116-1108-05 0116-1108-06 0116-1108-07 0116-1108-08

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 71.

©2019 Helmet House, Inc


EXPERIENCE THE VERSATILITY

RIGHT SIDE VIEW

EXCURSION TC-6

MSRP

REAR VIEW

$799.00

EXCURSION TC-3

EXCURSION TC-5 (Matte)

®

Sizes XS S M L XL 2XL

Includes Pinlock® Shield & Lens Fog Resistant System

EXCURSION

TC-3 0116-1003-03 0116-1003-04 0116-1003-05 0116-1003-06 0116-1003-07 0116-1003-08

TC-5 0116-1005-03 0116-1005-04 0116-1005-05 0116-1005-06 0116-1005-07 0116-1005-08

TC-6 0116-1006-03 0116-1006-04 0116-1006-05 0116-1006-06 0116-1006-07 0116-1006-08

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement parts for these helmets may be found on page 71. ©2019 Helmet House, Inc

39


40

OPEN FACE HELMET With the new SHOEI J-O, retro meets modern. Featuring a classic open-face shell design inspired by a rich heritage of vintage SHOEI models, the new J-O is finished with a splash of modern styling, a compact profile thanks to SHOEI’s advanced technologies and stateof-the-art manufacturing techniques, and the innovative CJ-3 shield for increased performance and maximum versatility. Premium liner materials provide optimal comfort, performance and aesthetics, and round out the J-O’s flawless fit and finish.

COMPACT SHELL Blending classic and modern design attributes with proprietary materials and advanced manufacturing techniques have yielded the J-O’s unique — and beautifully compact — shell profile. A narrow design that features a streamlined 1950’s “Ducktail”, the J-O’s AIM shell is sleek, classy, and performancedriven all in one.

CJ-3 SHIELD SYSTEM The vintage-inspired, retractable, and adjustable CJ-3 shield offers instant relief from incoming wind while protecting against 99% of the sun’s damaging UV rays. Featuring a distortion-free view throughout the entire field of vision, the CJ-3 shield is sure to enhance your ride. The bottom end of the CJ-3 shield curves to the outside to avoid touching the rider’s face. Tabs located on both sides of the shield not only aid opening and closing the shield, but also act as spoilers to channel air flow from front to sides, reducing noise and turbulence.

SHIELD ADJUSTMENT MECHANISM The J-O’s shield adjustment mechanism offers three adjustments for how low the the shield will deploy over a rider’s face. In addition to the shield’s height adjustment mechanism, this adjustment aids in positioning the shield for fixing and removal. The shields can be removed easily by adjusting a lever to the position, and removing catches. ©2019 Helmet House, Inc


41

ENJOY THE RIDE AIM SHELL CONSTRUCTION The J-O features technology that integrates a multi-ply matrix specifically designed to meet DOT standards. The J-O’s AIM shell is available in six sizes from XS to 2XL (3 shells/4 liners) to ensure a custom fit for every rider.

3

SHELL SIZES XS-XXL

DOT

APPROVED

HELMET SIZE

XS

S

SHELL

M

M

EPS LINER

S

CHEEK LINER

S

M

L

XL

2XL

L

XL

L

XL L

CENTER PAD SIZE

S13

S9

M9

L9

XL9

XL5

CHEEK PAD SIZE

39

35

35

35

35

31

CHEEK PAD (Optional)

All sizes of cheek pads are interchangeable in all helmet sizes NOTE: Optional 43mm cheek pad available

COMFORT INTERIOR The J-O is equipped with a fully removable, washable, replaceable, and adjustable interior system that combines a comfortable fit and secure hold for distraction-free, high speed riding. The J-O is secured with a D-ring strap. Unmatched attention to detail and high-quality liner materials help accentuate the J-O’s overall finish and premium aesthetics. Each J-O interior also features a cool retro embroidered tag with a vintage feel. ©2019 Helmet House, Inc


ENJOY THE RIDE

42

O P E N - F A CE H ELMET • Lightweight, Multi-Ply Matrix AIM (Advanced Integrated Matrix) shell • High performance fiberglass and organic fibers are combined to create a shell structure that is ultra-lightweight, rigid, and resilient • A dual-layer EPS liner allows for smooth passage of air, improving cooling performance • Three different shell sizes for perfect fit and compact dimensions • CJ-3 internal shield system offers a rounded, goggle-shaped shield that offers room for clear glasses or sunglasses, while reducing turbulence • A three-step preset lever is provided in order to keep the bottom end of the shield from impacting the nose or face while riding • Nubuck leather interior trim for ease of cleaning • Nubuck lining around shield minimizes glare • Cheek pad channels for eyeglasses • Removable, washable interior • Standard chin strap snap

SOLID/MATTE/ METALLIC MSRP

RAT GREY

$379.00

SOLID Sizes

Black

XS S M L XL 2XL

0131-0105-03 0131-0105-04 0131-0105-05 0131-0105-06 0131-0105-07 0131-0105-08 REAR VIEW

METALLICS & MATTES TOP VIEW

TECHNICAL INFORMATION Standards: DOT-218 Approved Construction: AIM (Advanced Integrated Matrix) Shell Weight: 2.73 lbs / 1238 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged and boxed, 6 per master carton

BLACK REPLACEMENT CJ-3 SHIELDS CJ-3 Shield Clear CJ-3 Shield Hi-Def Yellow CJ-3 Shield Dk Smoke CJ-3 Shield Spectra Silver CJ-3 Shield Spectra Gold

Sizes

Matte Black

Matte Brown

Rat Grey

Off White

XS S M L XL 2XL

0131-0135-03 0131-0135-04 0131-0135-05 0131-0135-06 0131-0135-07 0131-0135-08

0131-0140-03 0131-0140-04 0131-0140-05 0131-0140-06 0131-0140-07 0131-0140-08

0131-0167-03 0131-0167-04 0131-0167-05 0131-0167-06 0131-0167-07 0131-0167-08

0131-0169-03 0131-0169-04 0131-0169-05 0131-0169-06 0131-0169-07 0131-0169-08

SHOEI SHELF TALKER J-O Part# 02-848

MATTE BLACK

0231-9100-00 0231-9103-00 0231-9105-00 0231-9107-00 0231-9113-00

Please Note: Replacement parts for these helmets may be found on page 72.

MATTE BROWN

OFF WHITE

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


ENJOY THE RIDE

CARBURETTOR TC-6

TOP VIEW

CARBURETTOR CARBURETTOR TC-8 (Matte)

MSRP

$449.00

Sizes

TC-6

TC-8

XS S M L XL 2XL

0131-1106-03 0131-1106-04 0131-1106-05 0131-1106-06 0131-1106-07 0131-1106-08

0131-1108-03 0131-1108-04 0131-1108-05 0131-1108-06 0131-1108-07 0131-1108-08

SEQUEL SEQUEL TC-10

SEQUEL TC-5

MSRP

$449.00

Sizes

TC-5

TC-10

XS S M L XL 2XL

0131-1305-03 0131-1305-04 0131-1305-05 0131-1305-06 0131-1305-07 0131-1305-08

0131-1310-03 0131-1310-04 0131-1310-05 0131-1310-06 0131-1310-07 0131-1310-08

TOP VIEW

TOP VIEW

WAIMEA

MSRP

$449.00

WAIMEA TC-10

NOSTALGIA

Sizes

TC-10

Sizes

TC-10

XS S M L XL 2XL

0131-1210-03 0131-1210-04 0131-1210-05 0131-1210-06 0131-1210-07 0131-1210-08

XS S M L XL 2XL

0131-1410-03 0131-1410-04 0131-1410-05 0131-1410-06 0131-1410-07 0131-1410-08

MSRP

$449.00

NOSTALGIA TC-10

NOTE: Assymetric graphic. Right and left side of helmet are different.

Please Note: Replacement parts for these helmets may be found on page 72.

toll free / 1-800-421-7247 online / www.helmethouse.com

REAR VIEW ©2019 Helmet House, Inc

43


44

®

ONE WITH THE ROAD SHOEI presents the J-Cruise, our premium open-face helmet. The J-Cruise offers the open feeling and easy handling you’d expect from an open face touring helmet, along with a higher level of stability and function to satisfy the needs of today’s performance rider.

The result: state-of-the-art, high tech protection combined with the open-air freedom to experience the exhilaration of the ride at its fullest.

CJ-2 SHIELD QSV-1 SUN SHIELD The J-Cruise comes equipped with a CJ-2 shield, featuring a slight contour or “air dam” along the bottom to reduce wind entry. When down, the shield is kept firmly in place with an improved, easy to use shield lock mechanism. The CJ-2 shield includes built-in pins for a Pinlock EVO® fog resistant system (sold separately), and offers 99% protection from harmful UV A & B rays.The shield base has also been improved; a simple “down & press” action seals the shield into a secure dual-ridge window bead, further reducing wind and rain entry. The J-Cruise also features SHOEI’s exclusive QSV-1 retractable, built-in sun shield. Built to the standard of high-grade sunglasses, the QSV-1 not only reduces glaring sunlight, but also eliminates visual distortion, ensuring an optimal view while riding.

COMPACT, STYLISH SHAPE SHOEI has modified the shape of the J-Cruise to accommodate the addition of a built-in sun shield, resulting in a modern, stylish look. The shape is further streamlined with the inclusion of a rear air spoiler that helps increase stability and safety at high speeds. ©2019 Helmet House, Inc


45

OPEN-FACE HELMET Channel for Eyeglass Earpieces

3D MAX-DRY INTERIOR

3D Center Pad

The J-Cruise’s fully removable and washable interior, consisting of a 3D center pad, cheek pads, and chinstrap cover, is designed to correspond to most head shapes. A multi-layer polyurethane foam construction is utilized in the cheek pads, ranging from the softest padding against the rider’s cheek to the firmest against the helmet shell. A channel has been included at the top of each cheek pad to accommodate eyeglass earpieces. Multi-Layer Cheek Pads

FOUR SHELL SIZES • FOUR LINER SIZES HELMET SIZE

M

L

SHELL

S

M

L

XL

EPS LINER

S

M

L

XL

35mm

35mm

CHEEK PAD (Standard)

EPS Liner

CHEEK PAD (Optional)

XS

39mm

S

35mm

XL

35mm

2XL

31mm

All sizes of cheek pads are interchangeable in all helmet sizes

NOTE: Optional 43mm cheek pad available

VENTILATION Rider comfort helps improve concentration. The ventilation system of the J-Cruise is engineered to help maintain comfort during long rides. Fresh air is brought into the helmet through the forehead vent, which is regulated by a sliding shutter. Hot air is simultaneously exhausted through two top rear vents, as well as through the sun shield’s housing and out a lower rear outlet, helping to avoid heat buildup when the shield is down. Includes Pinlock® Prepared Shield Fog Resistant System

LIGHT WEIGHT, FLEXIBLE SHELL Multi-Ply Matrix AIM (Advanced Integrated Matrix) — A high performance combination of advanced shell materials adds up to a lightweight shell with increased rigidity and elasticity.

©2019 Helmet House, Inc


ONE WITH THE ROAD

46 ®

O P E N -FA CE H ELMET SHOEI’s J-Cruise is the premium open-face helmet for today’s rider. State-of-the-art, high tech protection combines with open-air freedom for a safe and exhilarating riding experience. • Lightweight, Multi-Ply Matrix AIM (Advanced Integrated Matrix) shell • Adjustable top and rear exhaust vents • A multi-piece EPS liner allows for smooth passage of air, improving cooling performance • Easily removable shield secured by the shield stopper to prevent unexpected opening at speed • Five layer construction in cheek pads • 3D Max-Dry removable, washable interior liner • Padded chin strap Internal Sun Shield System • Built in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion • Shield meets ANSI Z80.3-2010 standard for REBORN non-prescription eyeglasses MSRP TC-1 • Large and easy to reach switch activates the 3D $599.99 REBORN injection-molded inner sun shield • Distortion-free shield blocks 99% of harmful UV rays Sizes TC-1 TC-5 • Forehead area of the outer shell is raised slightly to S 0130-1001-04 0130-1005-04 accommodate the internal sun shield, helping allow for the integrity of the helmet’s inner EPS liner M 0130-1001-05 0130-1005-05 to remain intact L 0130-1001-06 0130-1005-06 CJ-2 Face Shield System XL 0130-1001-07 0130-1005-07 • QR-N base plates allow tool-less shield removal and 2XL 0130-1001-08 0130-1005-08 eliminate side covers for a flush, quiet fit • Wide, three dimensionally curved shield offers increased peripheral vision and optical clarity • Contoured air dam along the bottom edge helps prevent wind from blowing up under the shield • Scratch-resistant coating • 99% protection from harmful UV A & B rays • One-piece injection-molded for consistent fit • 10mm longer than the CJ-1 it replaces • Pinlock®-ready face shield Includes Pinlock® Prepared Shield SOLIDS BLACK WHITE Sizes Black White Fog Resistant System XS 0130-0105-03 0130-0109-03 See page 48 S 0130-0105-04 0130-0109-04 SOLIDS MSRP M 0130-0105-05 0130-0109-05 $499.99 L 0130-0105-06 0130-0109-06 MATTES & XL 0130-0105-07 0130-0109-07 METALLICS MSRP 2XL 0130-0105-08 0130-0109-08 $530.99 REAR VIEW

METALLICS & MATTES Sizes

Wine Red

XS S M L XL 2XL

0130-0111-03 0130-0111-04 0130-0111-05 0130-0111-06 0130-0111-07 0130-0111-08

Anthracite

Brilliant Yellow

Matte Black

0130-0117-03 0130-0123-03 0130-0135-03 0130-0117-04 0130-0123-04 0130-0135-04 0130-0117-05 0130-0123-05 0130-0135-05 0130-0117-06 0130-0123-06 0130-0135-06 0130-0117-07 0130-0123-07 0130-0135-07 0130-0117-08 0130-0123-08 0130-0135-08 SHOEI SHELF TALKER J-CRUISE Part# 02-846

Packaging:

DOT-218 AIM (Advanced Integrated Matrix) Shell 3.36 lbs / 1528 grams (approx, based on Size Medium Solid Color) Individually wrapped, bagged, and boxed, 8 per master carton

©2019 Helmet House, Inc

WINE RED

BRILLIANT YELLOW

0130-0137-03 0130-0137-04 0130-0137-05 0130-0137-06 0130-0137-07 0130-0137-08

TECHNICAL INFORMATION Standards: Construction: Weight:

ANTHRACITE

Matte Deep Grey

REBORN TC-5

MATTE BLACK

MATTE DEEP GREY

Please Note: Replacement shields and parts for these helmets may be found on page 72.

toll free / 1-800-421-7247 online / www.helmethouse.com


ONE WITH THE ROAD

®

CJ-2SP SHIELD and

V - 44 0 VI S O R This new shield and visor from SHOEI is specifically designed for the J-Cruise helmet. It is a new shield, differing from the standard CJ-2 shield in that it accommodates the new V-440 visor. • CJ-2SP shield and V-440 visor have to be used together as an integrated set • Shield and visor are sold separately • Shield and visor need to be assembled prior to installing on the J-Cruise helmet • Visor available in black or white CJ-2SP Face Shield System • QR-N base plates allow tool-less shield removal and eliminate side covers for a flush, quiet fit • Wide, three dimensionally curved shield offers increased peripheral vision and optical clarity • Contoured air dam along the bottom edge helps prevent wind from blowing up under the shield • Scratch-resistant coating • 99% protection from harmful UV A & B rays • One-piece injection-molded for consistent fit • 10mm longer than the CJ-1 it replaces • Pinlock®-ready face shield

Shown with CJ-2SP shield and V-440 visor

10U-SH-13 BLUETOOTH COMMUNICATION SYSTEM for J-CRUISE Part #0510-1301-00 MSRP

$299.00 See pages 77-78 for product details for this new integrated Bluetooth system

SHIELD MSRP

VISOR MSRP

$69.99

J-CRUISE CJ-2SP SHIELD Part # 0230-9400-00

J-CRUISE CJ-2/CJ-2SP PINLOCK LENS

+

$31.20

J-CRUISE V-440 VISOR Black Part #0230-6001-05 White Part # 0230-6001-09

=

Clear Part # 0230-9800-00

toll free / 1-800-421-7247 Fog Resistant System

online / www.helmethouse.com

©2019 Helmet House, Inc

47


THE WORLD’S PREMIER OPEN-FACE HELMET

48

®

O P EN - F A C E H ELMET

The RJ Platinum-R establishes a higher standard for what an open-face helmet should be, with a fully removable, washable, adjustable interior, enhanced ventilation performance, and a remarkably quiet riding experience. • Lightweight, Multi-Ply Matrix AIM+ (Advanced Integrated Matrix Plus) shell • Adjustable top intake and rear exhaust vents • A dual layer EPS liner allows for smooth passage of air, improving cooling performance • SHOEI’s distinctive GT visor • Soft and comfortable 3D liner • Cheek pad channels for eyeglasses • Removable, washable interior • Padded chin strap

WINE RED MATTES & METALLICS MSRP XS-2XL

SOLIDS MSRP XS-2XL

$328.99

$349.99

3XL

3XL

$364.99

$373.99

Adjustable Air Intake

Adjustable Exhaust Vent

TECHNICAL INFORMATION Standards: Snell 2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) Shell Weight: 2.86 lbs / 1300 grams (approx, based on Size Medium Solid Color) Packaging: Individually wrapped, bagged, and boxed, 6 per master carton

toll free / 1-800-421-7247 online / www.helmethouse.com

RJ PLATINUM-R SHOEI VENTILATION SYSTEM

Cheek Pads

Fits Sizes

Sizes:

01-218 01-219 01-220 01-221 01-222 01-223

3XL OPTIONAL XS/XL/2XL OPTIONAL 2XS/SM/MD/LG OPTIONAL

31mm 33mm 35mm 37mm 39mm 41mm

Please see page 80 for center pad info.

Please Note: Replacement visors and parts for these helmets may be found on page 72. ©2019 Helmet House, Inc


THE WORLD’S PREMIER OPEN-FACE HELMET

BLACK

WHITE

LIGHT SILVER

ANTHRACITE METALLIC

MATTE BLACK

CRYSTAL WHITE

MATTE GREY

PEARL GREY

®

O PEN-FACE HEL MET

Sizes XS S M L XL 2XL 3XL

SOLIDS

MATTES & METALLICS

Black

White

Sizes

Light Silver

02-601 02-602 02-603 02-604 02-605 02-606 02-691

02-607 02-608 02-609 02-610 02-611 02-612 02-692

XS S M L XL 2XL 3XL

02-619 02-620 02-621 02-622 02-623 02-624 ­02-693

Anthracite Metallic

Matte Black

Wine Red

Crystal White

Matte Grey

Pearl Grey

02-625 02-626 02-627 02-628 02-629 02-630 —

02-631 02-632 02-633 02-634 02-635 02-636 02-695

02-637 02-638 02-639 02-640 02-641 02-642 —

02-661 02-662 02-663 02-664 02-665 02-666 —

02-649 02-650 02-651 02-652 02-653 02-654 —

02-655 02-656 02-657 02-658 02-659 02-660 —

SHOEI SHELF TALKER RJ Platinum-R Part# 02-843

REPLACEMENT VISOR RJ Platinum-R Part# 01-349

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement visors and parts for these helmets may be found on page 72. ©2019 Helmet House, Inc

49


50

®

FOR EVERY Road

Adventure riding essentially knows no bounds. SHOEI’s Hornet X2 offers serious adventure touring and dual-sport enthusiasts the optimal balance between on- and off-road form and function. Designed to maintain peak performance without compromising the core values of long distance touring, the Hornet X2 is a true all-road, all-weather helmet.

DESIGN CONCEPT SHOEI’s Hornet X2 is a hybrid of a premium road and off-road helmet. The shape of the mouthpiece and chin bar area is designed to improve air intake and ventilation performance, while giving the rider additional air space needed to accommodate heavy breathing during off-road riding. Improving on the traditional off-road mouthpiece, the Hornet X2 provides additional protection in the event of adverse weather. A multi-stage lower vent shutter allows riders to fine tune airflow for most riding conditions.

FOUR SHELL SIZES The Hornet X2 features SHOEI’s exclusive Multi-Ply Matrix AIM+ shell construction. The shell is incredibly strong, extremely lightweight, and comes in four shell sizes to ensure a custom fit for heads between sizes XS-2XL.

EMERGENCY QUICK RELEASE SYSTEM +

Using technology from SHOEI’s racing helmets, the Hornet X2 is equipped with the Emergency Quick Release System (E.Q.R.S.)+ that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, thus allowing the helmet to be safely lifted from the head without creating unnecessary neck strain.

V-460 VISOR

Emergency Quick Release System Pull Tabs

The Hornet X2 has spent hours of development, both on the road and in SHOEI’s wind tunnel, to achieve the proper balance between aerodynamics and traditional visor functionality. Strategically placed vent louvers work with an innovative wedge shape to allow wind to pass through unobstructed, reducing drag and lift at high speed. Air is pushed into the helmet’s upper air intake for optimal cooling. Quarter-turn screws allow for quick and easy tool-less removal and installation. ©2019 Helmet House, Inc


51

3D MAX-DRY SYSTEM II INTERIOR

The Hornet X2 is equipped with a fully removable, washable, and replaceable 3D Max-Dry System II interior. SHOEI’s exclusive Max-Dry System II liner material absorbs and dissipates sweat and moisture REMOVABLE EAR PADS twice as fast as traditional nylon interiors, making it ideal for long riding days. The 3D center pad components are threedimensionally shaped to match the contours of the head, providing a firm yet comfortable fit. 3D-shaped multi-layer cheek pads are also available in multiple thicknesses for a fully customizable fit.

VENTILATION PERFORMANCE In designing the Hornet X2, SHOEI utilized its state-of-the-art

wind tunnel facility to help develop the optimal balance between airflow, silence and functionality. A large, multi-position lower air intake/defroster optimized for fresh air intake and improved vision. Two shutter-controlled upper air vents offer optimal air intake and head cooling. Four uniquely-positioned rear exhaust outlets to take better advantage of negative pressure suction, and three neck outlet vents work together to yield unrivaled cool air intake and hot air exhaust.

CNS-2 SHIELD and QR-N BASE PLATE

SHOEI’s CNS-2 shield offers 99% protection against the sun’s damaging UV rays and a distortion-free view, thanks to the 3D injection-molding process. An innovative rib along the top edge improves rigidity and eliminates bending. The Hornet X2’s QR-N base plate system facilitates quick and efficient shield changes when on the road. Strengthened spring-loaded technology pulls the shield back against the window beading to protect against dust, wind, and rain with every closure.

THICKER, MORE DURABLE WINDOW BEADING

QUICKRELEASE BASE PLATE

DUAL-LAYER/MULTI-DENSITY EPS LINER The Hornet X2’s Dual-Layer, Multi-Density EPS liner utilizes

varying densities of foam in key areas around the head, providing enhanced impact absorption. Air tunnels created in the EPS liner provide superior ventilation by allowing unrestricted flow of cooling air through and out of the liner. Precise placement of multi-density EPS liner material yields a more compact, lightweight design. HELMET SIZE

XS

MD

LG

XL

2XL

SHELL

SM

MD

LG

XL

EPS LINER

SM

MD

LG

XL

HELMET SIZE CENTER PAD CHEEK PAD ©2019 Helmet House, Inc

SM

Standard Standard Optional

XS

SM

MD

LG

XL

XXL

S13

S9

M9

L9

XL9

XL5

39mm

35mm

35mm

35mm

35mm

31mm

ALL CHEEK PAD SIZES INTERCHANGEABLE IN ALL HELMET SIZES

NOTE: Optional 43mm cheek pads available


FOR EVERY ROAD

52

®

The all-new design of the SHOEI Hornet X2 helmet is ideal for the dual-sport/adventure market that strikes the optimal balance between on and off road form and function. The Hornet X2 is a true all-road, any-condition helmet.

FEATURES

Multi-Ply Matrix AIM+ Shell Construction • Smaller, lighter yet stronger shell design; compact and aerodynamic • Four shell sizes ensure a custom fit • Dual layer multi-density EPS liner accommodates a more compact design without compromising ventilation CNS-2 Shield System • All-new CNS-2 3D injection-molded shield offers a distortion-free view • Innovative ribs on the top edge of the shield improve rigidity when opening and closing • QR-N base plate system offers quick and efficient shield removal without having to remove the visor • Improved shield locking system • Pinlock® EVO shield and lens included 3D Max-Dry System II Interior • Center pad components are three-dimensionally shaped to match contours of the rider’s head, allowing a comfortable fit while maintaining a firm hold for high speed riding • 3D-shaped cheek pads available in multiple thicknesses for a custom fit • Max-Dry System II liner material quickly absorbs and dissipates sweat and moisture • E.Q.R.S. (Emergency Quick-Release System) allows emergency personnel to easily remove cheek pads from an injured rider’s helmet • Removable ear pads • Breath guard and chin curtain included V-460 Visor • All-new V-460 visor is the result of many hours in SHOEI’s wind tunnel, featuring an innovative wedge shape with strategically placed vent louvers which allow wind to pass through unobstructed at high speed Ventilation • A large, multi-position lower air intake/defroster • Two shutter-controlled upper air vents • Four uniquely-positioned rear exhaust outlets • Three neck outlet vents

WHITE

SOLIDS MSRP

$594.99 MATTES & METALLIC MSRP

$603.99

REAR VIEW

SHIELD UP WITH GOGGLES

TECHNICAL INFORMATION Standards: Construction: Weight: Packaging:

Snell M2015 and DOT-218 Approved AIM+ (Advanced Integrated Matrix Plus Multi Fiber) 3.99 lbs / 1813 grams (approx. for Size Medium Solid Color) Individually wrapped, bagged, and boxed, 6 per master carton

Includes Shield and Lens Fog Resistant System

CNS-2 PINLOCK® SHIELD CLEAR CNS-2 PINLOCK® SHIELD DARK SMOKE CNS-2 SPECTRA SHIELD SILVER PINLOCK® EVO LENS EAR PAD CHIN CURTAIN

0224-9400-00 0224-9405-00 0224-9407-00 0224-9300-00 0209-4705-00 0212-3705-00

SHIELD REMOVED

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement visors, shields and parts for these helmets may be found on page 72. ©2019 Helmet House, Inc


FOR EVERY ROAD

BLACK

SILVER

MATTE BLACK

MATTE DEEP GREY

®

A D V ENTUR E HEL MET METALLIC & MATTES

SOLIDS Sizes

Black

White

Sizes

Silver

Matte Black

Matte Deep Grey

XS S M L XL 2XL

0124-0105-03 0124-0105-04 0124-0105-05 0124-0105-06 0124-0105-07 0124-0105-08

0124-0109-03 0124-0109-04 0124-0109-05 0124-0109-06 0124-0109-07 0124-0109-08

XS S M L XL 2XL

0124-0107-03 0124-0107-04 0124-0107-05 0124-0107-06 0124-0107-07 0124-0107-08

0124-0135-03 0124-0135-04 0124-0135-05 0124-0135-06 0124-0135-07 0124-0135-08

0124-0137-03 0124-0137-04 0124-0137-05 0124-0137-06 0124-0137-07 0124-0137-08

SHOEI SHELF TALKER HORNET X2 Part# 02-858

NAVIGATE TC-2

NAVIGATE TC-3 (Matte)

NAVIGATE TC-5 (Matte)

®

NAVIGATE TC-8 MSRP

$715.99 REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

Sizes XS S M L XL 2XL

TC-2 0124-1202-03 0124-1202-04 0124-1202-05 0124-1202-06 0124-1202-07 0124-1202-08

NAVIGATE

TC-3 0124-1203-03 0124-1203-04 0124-1203-05 0124-1203-06 0124-1203-07 0124-1203-08

TC-5 0124-1205-03 0124-1205-04 0124-1205-05 0124-1205-06 0124-1205-07 0124-1205-08

TC-8 0124-1208-03 0124-1208-04 0124-1208-05 0124-1208-06 0124-1208-07 0124-1208-08

Please Note: Replacement visors, shields and parts for these helmets may be found on page 72.

©2019 Helmet House, Inc

53


54

T H E F U T U R E H A S AR R I VED DESIGN CONCEPT The world’s most evolved motocross helmet has evolved. Long overdue? Perhaps. But world-class engineering and quality take time. Fully loaded with next-level performance, safety, style, and progression, the all-new VFX-EVO proudly boasts the SHOEI-exclusive Motion Energy Distribution System (M.E.D.S.) — strategically engineered to reduce rotational acceleration energy to the head in the event of an accident. Completely reimagined and re-engineered without sacrificing an ounce of the quality and performance that have given SHOEI motocross and off-road riders championship-worthy confidence for nearly a decade, the all-new VFX-EVO has finally arrived. Worth the wait? We thought you’d agree.

MOTION ENERGY DISTRIBUTION SYSTEM The proprietary, SHOEI-exclusive Motion Energy Distribution System (M.E.D.S.) features a dual-layer, multi-density EPS liner that, in addition to preserving the lightweight, impact-absorbing characteristics of SHOEI’s traditional EPS systems, has been specially engineered to reduce rotational acceleration energy to the head in the event of an accident. Anchored by a larger center column, the inner layer of the dual-layer system swings during impact, allowing its three strategically-designed perimeter columns to absorb the energy. The end result is a significant reduction of rotational forces to the rider’s head without sacrificing an ounce of quality or performance.

DUAL-LAYER / MULTI-DENSITY EPS LINER In addition to absorbing and reducing rotational energy thanks to the all-new M.E.D.S. technology, the VFX-EVO’s dual-layer, multi-density EPS liner provides enhanced impact absorption by utilizing varying densities of foam in key area around the rider’s head. Channels between the EPS layers allow cooling air to travel unrestricted through the helmet, further enhancing the VFX-EVO’s superior ventilation characteristics. In addition to enhanced impact absorption and ventilation, the precise placement of multidensity EPS liner material yields a more compact, lightweight design.

MULTI-PLY MATRIX AIM+ SHELL Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2015 and DOT standards. Hand laid interwoven layers of fiberglass with lightweight organic fibers and high-performance fibers. SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption.

SHELL DESIGN Through a new state-of-the-art shell forming technology exclusive to SHOEI, the VFX-EVO incorporates the aerodynamic advantages of a spoiler into its shell, and consistent shell thickness guarantees the proper strength and weight of each and every helmet. The larger eyeport allows for a greater peripheral field of vision and facilitates oversized goggles. Additionally, the shellintegrated goggle channel has been optimized to form a perfect goggle channel retention system.

VENTILATION PERFORMANCE Racing environments can be extremely hot and fatiguing, which is precisely why next-level ventilation performance was a top priority when SHOEI engineers conceptualized the VFX-EVO. Boasting sixteen intake and exhaust vents in total (one more additional intake and two additional exhaust vents more than the VFX-W) — all strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet — the VFX-EVO’s ventilating prowess is second to none. Along with optimized shell aerodynamics, cooling air channels in the VFX-EVO’s dual-layer EPS liner further enhance its world-class ventilation performance. ©2019 Helmet House, Inc


55

V-470 VISOR The all-new V-470 visor has been specially designed to flow with the styling and funtionality of the VFX-EVO’s aggressive new shell shape. With a massive field of vision and optimal roost protection still top priorities, the V-470 has been engineered to utilize the highest point of adjustability as its standard “home” position. Though aligning seamlessly with the shape of the shell when at the highest point, the V-470 also features a new flange mechanism to easily find the home position (even while wearing the helmet), and also helps to prevent unexpected movement during aggressive off-road riding. Made of a high-grade polycarbonate, the V-470 screws are extremely durable, yet capable of sheering off in the event of an impact to help prevent unnecessary forces to the rider’s head.

MOUTH PIECE AND CHIN BAR Wind-tunnel refined and featuring larger openings to optimize the ability to pull cooling air in through the chin bar of the helmet, the VFX-EVO’s mouthpiece is equal parts style, functionality, and safety. Reinforced by a strategically-placed strip of AIM+ shell material, the mouthpiece also features an aluminum mesh screen and a removable, washable foam filter to help prevent roost, rocks, mud, and dust from entering the helmet. The entire chin bar of the VFX-EVO features highquality EPS liner material for enhanced impact absorption.

3D MAX DRY INTERIOR SYSTEM The VFX-EVO is equipped with a fully removable, washable, replaceable, and adjustable 3D Max-Dry Interior System. SHOEI’s exclusive Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors, and in combination with the VFX-EVO’s superior ventilation system, keeps racers and aggressive riders alike cool and dry during intense riding sessions. In addition to the Max-Dry material utilized on the forehead and cheek area, a soft yet durable fabric is applied to the lower part of the cheek pads for a plusher overall fit and feel. The VFX-EVO’s 3D center pad components are three-dimensionally shaped to match the contours of a rider’s head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, aggressive riding and racing. Additionally, the VFX-EVO’s 3D center pads and multi-layer cheek pads are available in different thicknesses for a customizable fit.

EMERGENCY QUICK-RELEASE SYSTEM (E.Q.R.S.) Borrowing technology originally developed for SHOEI’s groundbreaking VFX-W and X-Twelve racing models, SHOEI equipped the all-new VFX-EVO with its exclusive Emergency QuickRelease System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet. With the cheek pads removed, the helmet can be safely lifted from a rider’s head without creating unnecessary strain in the neck area.

MUD GUARD

SHOEI has developed a new mud guard which is specially shaped so as not to interfere with the wearing of goggles. Dedicated plastic tabs help hold the mud guard firmly in place during serious off-road riding conditions.

toll free / 1-800-421-7247 online / www.helmethouse.com

HELMET SIZE

XS

SM

MD

LG

XL

XXL

SHELL

SM

MD

LG

XL

LINER

SM

MD

LG

XL

HELMET SIZE CENTER PAD Standard CHEEK PAD

Standard Optional

XS S13 39mm

SM

MD

LG

XL

S9

M9

L9

XL9

35mm 35mm 35mm 35mm All sizes of cheek pads are interchangeable in all helmet sizes

XXL XL5 31mm

©2019 Helmet House, Inc


56

THE FUTURE HAS ARRIVED

NEW LOWER PRICE! ®

O FF-R O A D H ELMET FEATURES

Multi-Ply Matrix AIM+ Shell • Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2015 and DOT standards • Hand-laid interwoven layers of fiberglass with lightweight organic and high-performance fibers • SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption Ventilation Performance • Boasting sixteen intake and exhaust vents in total • Wind tunnel-tested for optimal vent port shapes, sizes, and locations • Improved negative air pressure suction for enhanced cool-air intake and hot-air expulsion • Cooling air channels in the dual-layer EPS liner further enhance airflow • Optimized to excel in the demanding confines of off-road and motocross environments 3D Max-Dry Interior System • Fully removable, washable, replaceable, and adjustable • Max-Dry liner material absorbs and dissipates sweat two times faster than traditional nylon interiors • Soft yet durable lower cheek pad fabric for a plush fit and feel • Multi-layer cheek pads for maximum comfort and superior helmet stabilization • Three-dimensionally shaped to match the contours of a rider’s head Motion Energy Distribution System (M.E.D.S.) • Proprietary, SHOEI-exclusive rotational energy absorption technology • Anchored by larger center column, inner layer that swings during impact • Strategically-designed perimeter columns absorb rotational energy • Significant reduction of rotational forces to the rider’s head • Preserves the lightweight, impact-absorbing characteristics of SHOEI’s traditional EPS liner systems Dual-Layer / Multi-Density EPS Liner • Provides enhanced impact absorption by utilizing varying densities of foam • Allows cooling air to travel unrestricted through tunnels created by the EPS • Precise placement of multi-density EPS material yields a more compact layer design • M.E.D.S. technology helps absorb and reduce rotational energy • High-quality EPS liner material throughout the entire chin bar for enhanced impact absorption V-470 Visor • Specially designed for a seamless connection with the shell • New flange mechanism easily finds home position and prevents unexpected movement • High-grade polycarbonate screws are capable of shearing off on impact to help prevent forces to the rider’s head Emergency Quick Release System (E.Q.R.S.) • Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet • Helmet can be gently removed from the rider’s head with minimal load placed on his/her neck TECHNICAL INFORMATION Standards: Snell M2015 and DOT-218 Approved Construction: AIM+ (Advanced Integrated Matrix Plus Multi Fiber) shell Weight: 3.36 lbs / 1522 grams (approx, based on size medium solid color) Packaging: Individually wrapped, bagged, and boxed, 6 per master carton

BRAYTON TC-1

BRAYTON MSRP

BRAYTON

$699.00

NEW LOWER PRICE!

Sizes

TC-1

XS S M L XL 2XL

0146-1401-03 0146-1401-04 0146-1401-05 0146-1401-06 0146-1401-07 0146-1401-08

REAR VIEW

Emergency Quick Release System (E.Q.R.S.): Pull straps enable the removal of cheek pads for easy removal of helmet by emergency personnel in event of an accident

BLACK SOLIDS, MATTE & METALLICS MSRP

$529.00

NEW LOWER PRICE!

Please Note: Replacement visors and parts for these helmets may be found on page 73.

WHITE

MATTE BLACK

SOLIDS & MATTE Sizes

Black

White

Matte Black

XS S M L XL 2XL

0146-0105-03 0146-0105-04 0146-0105-05 0146-0105-06 0146-0105-07 0146-0105-08

0146-0109-03 0146-0109-04 0146-0109-05 0146-0109-06 0146-0109-07 0146-0109-08

0146-0135-03 0146-0135-04 0146-0135-05 0146-0135-06 0146-0135-07 0146-0135-08

SHOEI SHELF TALKER VFX-EVO Part# 02-857

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


THE FUTURE HAS ARRIVED

GLAIVE TC-1

GLAIVE TC-5

NEW LOWER PRICE! GLAIVE TC-8 GLAIVE TC-2 MSRP

$679.00 REAR VIEW

Sizes XS S M L XL 2XL

TC-1 0146-1001-03 0146-1001-04 0146-1001-05 0146-1001-06 0146-1001-07 0146-1001-08

NEW LOWER PRICE!

GLAIVE

TC-2 0146-1002-03 0146-1002-04 0146-1002-05 0146-1002-06 0146-1002-07 0146-1002-08

TC-5 0146-1005-03 0146-1005-04 0146-1005-05 0146-1005-06 0146-1005-07 0146-1005-08

TC-8 0146-1008-03 0146-1008-04 0146-1008-05 0146-1008-06 0146-1008-07 0146-1008-08

ZINGER TC-1

Sizes XS S M L XL 2XL

ZINGER TC-10 (Matte)

MSRP

$679.00

ZINGER TC-2 (Matte)

ZINGER

TC-1 0146-1101-03 0146-1101-04 0146-1101-05 0146-1101-06 0146-1101-07 0146-1101-08

TC-2 0146-1102-03 0146-1102-04 0146-1102-05 0146-1102-06 0146-1102-07 0146-1102-08

TC-10 0146-1110-03 0146-1110-04 0146-1110-05 0146-1110-06 0146-1110-07 0146-1110-08

REAR VIEW

toll free / 1-800-421-7247 online / www.helmethouse.com

Please Note: Replacement visors and parts for these helmets may be found on page 73. ©2019 Helmet House, Inc

57


THE FUTURE HAS ARRIVED

58

NEW LOWER PRICE!

BLAZON TC-1

BLAZON TC-6

Sizes XS S M L XL 2XL

MSRP

$679.00

NEW LOWER PRICE!

BLAZON TC-5

BLAZON

TC-1 0146-1201-03 0146-1201-04 0146-1201-05 0146-1201-06 0146-1201-07 0146-1201-08

TC-5 0146-1205-03 0146-1205-04 0146-1205-05 0146-1205-06 0146-1205-07 0146-1205-08

TC-6 0146-1206-03 0146-1206-04 0146-1206-05 0146-1206-06 0146-1206-07 0146-1206-08

GRANT 3 TC-1

GRANT 3 TC-3 MSRP

$699.00 REAR VIEW

Sizes XS S M L XL 2XL

GRANT 3 TC-2

GRANT 3

TC-1 0146-1301-03 0146-1301-04 0146-1301-05 0146-1301-06 0146-1301-07 0146-1301-08

TC-2 0146-1302-03 0146-1302-04 0146-1302-05 0146-1302-06 0146-1302-07 0146-1302-08

TC-3 0146-1303-03 0146-1303-04 0146-1303-05 0146-1303-06 0146-1303-07 0146-1303-08

Please Note: Replacement visors and parts for these helmets may be found on page 73.

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


SHOEI BREATH GUARD and CHIN CURTAIN

59

The breath guard fits in the chin bar and deflects your breath, to help prevent shield fogging. The chin curtain deflects unwanted wind from hitting your chin and other parts of your face, installs snugly at the bottom of most SHOEI full-face helmets. CHIN CURTAIN Fits: X-Twelve/Qwest/RF-1100, RF-1200 X-Fourteen RF-SR NEOTEC GT-Air II Hornet X2 NEOTEC II Multitec BREATH GUARD Fits: X-Twelve X-Fourteen RF-SR/NEOTEC II RF-1100/Qwest/Neotec/GT-Air II, RF-1200 Hornet X2

SUPERTHINS

0212-3705-00 0212-3705-00 0212-3705-00 0217-3705-00 0218-3705-00 0212-3705-00 0216-3905-00 01-253 0212-3505-00 0204-3505-00 0213-3505-00 0213-3505-00 0224-3505-00

BREATH GUARDS

®

TEAR-OFFS

High-quality tear-offs for all your racing or riding needs. NOTE: #1018 is the best fit for SHOEI CF-1, CX-1V, HJC HJ-20, HJ-07, HJ-09, and HJ-26 with tear-off posts. #1035 is the best fit for SHOEI CWF-1 and CWR-F. CWF-1 #1035 - 5mills / 10pk Clear Standard Cut #1001 - 2mills / 15pk Clear Full Cut #1018 - 3mills / 15pk Clear Full Cut #1018 - 5mills / 10pk Clear

CHIN CURTAIN

CWF-1/CWR-F SHIELD TEAR-OFFS 2.5 mills 5-Pack part #0213-9900-00

30-066 30-067 30-068 30-069

AIR MASK Fits over nose and chin to prevent exhaled air from fogging shields. Fits SHOEI Helmet: X-Eleven, RF-1000, TZR X-Twelve, RF-1200, RF-SR (Air Mask 4) X-Fourteen (Air Mask 5)

01-339 0290-0405-00 0290-0505-00

HELMET SACK The SHOEI Helmet Sack is made of a soft, stretchable, velvety fabric to help protect your helmet. A drawstring pulls it closed. SHOEI HELMET SACK 01-901

HELMET BAG X

Replacement for the X-Fourteen helmet cover Part #0291-0005-00 ©2019 Helmet House, Inc

FLEECE LINED HELMET BAG Part #0291-0105-00

toll free / 1-800-421-7247 online / www.helmethouse.com


60

WANT TO ENHANCE YOUR MOTORCYCLE RIDE? SHOEI® TRANSITIONS® ADAPTIVE MOTORCYCLE SHIELDS SEAMLESSLY SELF-ADJUST FROM CLEAR TO DARK AND BACK AGAIN WITH CHANGING LIGHT CONDITIONS FOR ENHANCED VISUAL PERFORMANCE THROUGHOUT YOUR RIDE.

SUPERIOR RIDING PERFORMANCE

Whether dominating the race track or out for a pleasure ride, SHOEI® Transitions® adaptive shields solve this problem, motorcyclists know how important clear, crisp vision is. and even enhance vision, by seamlessly adjusting to Traditionally, riders dealt with changing light conditions by optimized darkness levels with the changing light. carrying two shields (one clear, one tinted) with them at all times.

TRANSITIONS OPTICAL - LEADERS IN PHOTOCHROMIC TECHNOLOGY Transitions Optical has been an industry leader in photochromic technology for 20 years and is known worldwide for its photochromic prescription eyeglasses: Transitions® lenses. The company’s continued commitment to innovation has helped Transitions® lenses to become the leading photochromic ophthalmic lens product and the number one eyecare professional-recommended photochromic lenses worldwide.

Transitions® adaptive sunwear is the company’s sunwear brand, which includes both prescription and non-prescription sunglass lenses, and motorcycle shields, that automatically darken and lighten in outdoor light. For the first time, with Transitions® adaptive shields, the company is expanding its product offering to non-ophthalmic products, bringing Transition’s® state-of-the-art technology to a broader audience.

Driven by innovation, the company has continually improved its core clear-to-dark product (Transitions® lenses), and has expanded in other areas with additional products that meet consumers’ visual needs, including sunwear and everyday products with varying features (lightly tinted to very dark and variable polarization).

Transitions® sunwear products are designed to enhance visual performance outdoors, optimizing the amount of darkness and color for specific outdoot activities like motorcycling, golf, driving, cycling, running, hunting/ target shooting, and water sports.

HOW PHOTOCHROMICS WORK Photochromic technology allows visors to automatically and seamlessly change from clear to dark in sunlight. The process works when photochromic dyes embedded into the lens or shield react to UV light, changing levels of darkness with the sun. When UV light is removed, a chemical reaction driven by ambient heat reconverts the activated photochromic molecules to their original, clear form and the lens fades. The amount darkening is a function of the competition between the activating and fading chemical reactions, the equilibrium condition established between them, and the specific photochromic molecules and the lens substrate. The more activated photochromic molecules that are present, the darker a lens becomes. The degree of darkness depends on the level of available UV radiation driving the activation reaction and the temperature of the lens, which drives the fade reaction. ©2019 Helmet House, Inc


PRODUCT DETAILS AND UV PROTECTION Transitions® adaptive sunwear products have a range of light transmission levels, all optimized for the specific activity the product is designed for. Specifically, the SHOEI® Transitions® adaptive shield: • Non-activated — virtually clear • Activated — darkens to a 15% light transmission level at 72º Fahrenheit and 23º Celsius • Full activation in two minutes • Fades to 50% transmission in two minutes • Like all Transitions® products, the shield blocks 100% of UV rays

61

TEMPERATURE

Like all photochromic products, temperature can cause fluctuation in performance. UV rays activate the photochromic molecules through a photochemical process — this makes the shield darken. The fade back reaction is actually driven by heat — so in extremely hot temperatures, the photochromic molecules are actually fading back while they are activating — this prevents the shield from fully darkening. Transitions® lens technology is the most advanced in the industry, and is the least temperature sensitive, but there will be some performance variables depending on the temperature.

SPECTRAL CURVE DATA 100

90 80 70

% TRANSMISSION

60 50 40 30 20 10 0 380

430

480

530

580

630

680

730

780

WAVELENGTH (NANOMETERS) UNACTIVATED

ACTIVATED

STANDARDS

SHOEI® Transitions® adaptive shields are designed to meet International Standards of Performance for driving. • Category as per ISO 8980-3 o Non-Activated — Category 0 o Activated — Category 3 • Traffic Signal recognition as per ISO 14889 • 100% protection from UVA and UVB as per ISO 8980-3 • 100% protection from UVA and UVB as per ANSI Z80.3 • Impact resistant as per US FDA Impact Resistant Regulation 21 CFR 801.410 • Impact resistant as per ANSI Z87.1 • Impact resistant as per ISO 14889 Section 5.2

SHOEI® TRANSITIONS® PHOTOCHROMIC SHIELD with PINLOCK® PINS CWR-1

0209-9755-00

Fits: RF-1200, RF-SR, and X-Fourteen

MSRP

$199.99 Fog Resistant System

NOTE: To prolong product life, do not store in sunlight.

TESTIMONIALS

Transitions® adaptive visors have been well-received in the motorcycle industry. A recent review by Roadracing World magazine said the visor was “Most excellent”, “Worth the price of admission”, and made an “amazing difference” in the reviewer’s ride.1

PROOFS AND SUBSTANTIATION • Transitions® lenses reduce squinting, eye fatigue and help prevent against eye strain.2 • Outside, Transitions® lenses reduce glare and enable riders to distinguish contrast more easily.3 1 Roadracing World magazine product review October 2010 2 Senson S. Light, Sight and Photochromics 2002:42., Scherick K. Enhancements to Quality of Vision With Photochromic Lenses and Antireflective Coating, 2004:5. 3 Senson S. Light, Sight and Photochromics 2002:42.

One-Year Warranty VISIT TRANSITIONS.COM/SUNWEAR FOR MORE INFORMATION AND A DEMONSTRATION OF THE SHIELD PERFORMANCE toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


®

62 54

FOR FULL-FACE AND MODULAR HELMETS

F O G - R E S I S TA N T S Y S T E M S PINLOCK® FOG-RESISTANT LENS INSTALLED ON A CW-1 CLEAR SHIELD WITH PINLOCK® PINS.

PINLOCK EVO® FOG-RESISTANT LENS (Sold separately)

Specially designed to install on shields with built-in pins, the PINLOCK® Fog-Resistant Lens transforms your single shield into a dual lens shield that will resist any amount of fog buildup. • • • •

With ProSeal® Airtight chamber Interchangeable Easily cleaned

CWF-1 PINLOCK® SHIELDS WITH TEAR-OFF POSTS CLEAR

CLEAR

DARK SMOKE

CX-1 Clear Shield w/Pinlock® Pins

01-511

CX-1V Pinlock EVO® Lens Clear CX-1V Pinlock® Lens Dk. Smoke CX-1V Pinlock® Lens Lt. Smoke

01-520 01-513 01-514

Transitions® CWR-1 Photochromic Shield w/Pinlock® Pins

0209-9755-00

CWF-1 Shield w/Pinlock Pins & Tear-off Posts - Clear CWF-1 Shield w/Pinlock® Pins & Tear-off Posts - HD Yellow CWF-1 Shield w/Pinlock® Pins & Tear-off Posts - Dk Smoke

0213-9500-00 0213-9503-00 0213-9505-00

CWF-1 Shield Tear-offs - Pack of 5

0213-9900-00

®

NOTE: The CNS-1, CNS-3, NEOTEC®, NEOTEC II®, and GT-Air® shield should only accommodate the clear Pinlock® lens. Tinted Pinlock® lenses are not to be used on the Neotec® or GT-Air® CNS-1 shields. In addition, do not combine a Pinlock® tinted lens with a Pinlock® prepared tinted shield. Only use a Pinlock® clear lens with a Pinlock® prepared tinted shield.

toll free / 1-800-421-7247 online / www.helmethouse.com

LIGHT SMOKE

YELLOW

AMBER

DARK SMOKE

YELLOW

CW-1 Clear Shield w/Pinlock® Pins C-49 Clear Shield w/Pinlock® Pins CNS-1 Clear Shield w/Pinlock® Pins CNS-2 Clear Shield w/Pinlock® Pins CNS-2 Shield Dk. Smoke w/Pinlock® Pins CNS-2 Spectra Chrome w/Pinlock® Pins CWR-F Clear Shield w/Tear-Off Posts CWR-F Yellow Shield w/Tear-Off Posts CWR-F Smoke Shield w/Tear-Off Posts CWR-1 Shield Clear w/Pinlock® Pins CWR-1 Shield Hi-Def Yellow w/Pinlock® Pins CWR-1 Shield Dk. Smoke w/Pinlock® Pins CWR-1 Shield Hi-Def Orange w/Pinlock® Pins CWR-1 Shield Lt. Smoke w/Pinlock® Pins CWR-1 Shield Mellow Smoke w/Pinlock® Pins CWR-1 Spectra Blue w/Pinlock® Pins CWR-1 Spectra Chrome w/Pinlock® Pins CWR-1 Spectra Gold w/Pinlock® Pins CW-1 Shield Hi Def Yellow w/Pinlock® Pins CW-1 Shield Dk. Smoke w/Pinlock® Pins CW-1 Shield Lt. Smoke w/Pinlock® Pins CNS-3 Clear Shield w/Pinlock® Pins CJ-2 Shield Clear w/Pinlock® Pins CJ-2SP Pinlock® Shield Clear CWR-F Pinlock EVO Lens CWR-1, CW-1, CNS-1, CNS-3 Pinlock® Lens Clear C-49 Pinlock® Lens Clear CNS-2 Pinlock® EVO Lens CJ-2/CJ-2SP Pinlock® Lens Clear

0213-9400-00 0214-9400-00 0217-9100-00 0224-9400-00 0224-9405-00 0224-9407-00 0209-9500-00 0209-9503-00 0209-9505-00 0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9402-00 0209-9407-00 0209-9413-00 0213-9403-00 0213-9405-00 0213-9415-00 0216-9100-00 0230-9100-00 0230-9400-00 0209-9300-00 0209-9800-00 0214-9300-00 0224-9300-00 0230-9800-00

©2019 Helmet House, Inc


63

SPECTRA CHROME

SPECTRA BLUE

SPECTRA GOLD

SPECTRA SHIELD An exciting shield for SHOEI helmets. Coated in a highvacuum chamber with metallic compounds, the Spectra shield by SHOEI gives a rainbow appearance while the coating improves eye protection by deflecting the sun’s harmful rays. • 99% protection from harmful UV A & B rays • Superb bright light eye protection • Space age technology • Impact resistant • Great looking

CX-1V HALF-TINT SHIELD

The SHOEI CX-1V half-tint shield provides riders with a versatile half-tint / half-clear shield option for changing light conditions.

SPECTRA SHIELDS CX-1V Fits:

CX-1V Half-Tint 01-422 SHOEI X-Eleven, RF-1000, TZ-R and Multitec series helmets

CNS-2 Fits:

CNS-2 Spectra Chrome SHOEI Hornet X2

CW-1 CW-1 CW-1 CW-1 Fits:

CW-1 Spectra Blue 0213-9402-00 Spectra Chrome 0213-9407-00 Spectra Gold 0213-9413-00 Spectra Fire Orange 0213-9416-00 SHOEI X-Twelve, RF-1100, Qwest

CWR-1 CWR-1 CWR-1 CWR-1 Fits:

CWR-1 with Pinlock® pins Spectra Blue 0209-9402-00 Spectra Chrome 0209-9407-00 Spectra Gold 0209-9413-00 Spectra Fire Orange 0209-9416-00 SHOEI RF-1200, X-Fourteen, RF-SR

0224-9407-00

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc


STANDARD & SPECTRA SHIELDS TINT & COLOR SAMPLES

64

Standard Clear

Spectra Chrome

Mellow Smoke

Light Smoke

Dark Smoke

Half-Tint

Spectra Blue

Spectra Gold

Hi-Def Orange

Hi-Def Yellow

Spectra Fire Orange

toll free / 1-800-421-7247 online / www.helmethouse.com

©2019 Helmet House, Inc


SHOEI HELMET DISPLAYS an d d isp lay c omp o n en t s Configurable for holding 20 or 40 helmets, display kits include one Single Frame Display Unit, along with the following replaceable accessories:

PLASTIC DISPLAY SHELF (20 or 40 each) 30-311

DOUBLE SHELF BRACKET

SIDE DOUBLE SHELF BRACKET*

(10 each) 30-472

(10 each) 30-473

*Side brackets are only included with the 40-shelf helmet display

SINGLE FRAME DISPLAY UNIT (No Grid) 30-471

20-SHELF HELMET DISPLAY KIT part #30-484

Maximize stock visibility, emphasize sales items, and easily update and consolidate store inventory with a sturdy, four-wheeled helmet display. These displays can be purchased as kits which include all the accessories needed to hold either 20 or 40 helmets. Additional accessories can be purchased separately (see facing page) to expand function: • SHOEI Display Signs • Sign Holders • Shelf Talkers • Shield Displayers

40-SHELF HELMET DISPLAY KIT part #30-481

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc

65


66

SHOEI HELMET DISPLAY OPTIONAL ACCESSORIES

48” STREET HELMET HEADER SIGN

48” DIRT HELMET HEADER SIGN

SHOEI DISPLAY HEADER & SLATWALL SIGNS

24” LOGO HEADER

24” 48” 24” 48” 48”

Slatwall Header Unit Slatwall Header Unit Logo Header Street Helmet Header Sign Dirt Helmet Header Sign

3124-0000-24 3148-0000-48 3124-0101-24 3148-0105-48 3148-0106-48

and Header Units

SHELF TALKERS Attractive, informative card strips especially designed for use with the Shoei plastic display shelf. SHOEI SHELF TALKERS SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI SHOEI

RJ PLATINUM-R GT-AIR J-CRUISE NEOTEC II J-O X-FOURTEEN X-TWELVE RF-1200 QWEST RF-SR VFX-EVO HORNET X2 GT-AIR II

Part# 02-843 02-845 02-846 02-847 02-848 02-850 02-851 02-852 02-854 02-856 02-857 02-858 02-862

CLEAR ACRYLIC SIGN HOLDER 11” x 8.5” 11” x 17.5”

Sign Holder Sign Holder

8.5” x 11”

2018 SHOEI SLAT WALL POINT-OF-PURCHASE SIGNAGE

30-302 30-981

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc

PRODUCT J-O Sign (When Available) X-Fourteen Sign RF-1200 Sign GT-Air II Sign (When Available) NEOTEC II Sign Hornet X2 Sign VFX-W Sign RF-SR Sign VFX-EVO Sign

11” x 17”

11”x17” 02-818 02-820 02-822 02-824 02-826 02-828 02-830 02-832 02-834

8.5”x11” 02-819 02-821 02-823 02-825 02-827 02-829 02-831 02-833 02-835


MISCELLANEOUS SHOEI DISPLAY ITEMS

SHOEI HORIZONTAL BANNER Large 8’ x 4’ Small 4’ x 2’

SHOEI WINDOW CLING 12” x 8” part #01-996

01-994 01-995

FOAM-CORE SIGN 24” Wall Sign Black Blue

01-985 01-993

SHOEI SINGLE-SIDED DISPLAY SIGN

SHOEI TWO-SIDED DISPLAY SIGN

24” W x 13” H

24” W x 11” H part #30-477 NOTE: For use with Center Sign Holder part #30-438

Black Blue

01-986 30-561

NOTE: For use with Single-Side Sign Holder (pair) part #30-437

DUAL SHIELD DISPLAYER (Includes nuts & bolts) part #30-501 NOTE: Requires SHOEI CW-1 Base Plate part #0213-0605-00 and/or HJC HJ-09 Base Plate part #19-025

SHOEI GLASS CUBE DISPLAY CLING SHOEI VERTICAL BANNER With 12” Slatwall Hook 60”h x 11”w part #01-980

©2019 Helmet House, Inc

11” Wide part #01-989

toll free / 1-800-421-7247 online / www.helmethouse.com

67


HELMET SIZING GUIDE

68

FULL-FACE HELMET SIZING GUIDE SIZE SHELL LINER CENTER PAD MASK LINER Standard CHEEK PADS Optional

XS S13

X-FOURTEEN S

S S

S9 S 35mm 39/31

39mm 43/35/31

NOTE: Optional 43mm cheek pad available

SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS 39 S13

CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS

M M M M9

L L L L9

35mm 39/31

35mm 39/31

XL

XL XL

XL9 L 35mm 39/31

XL5 31mm 39/35

GT-AIR/GT-AIR II S M

2XL

M

L XL L XL S M L XL 35 35 35 35 S9 M9 L9 XL9 31mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

2XL 31 XL5

RF-1200

M L XL 2XL M L XL M L XL 39 35 35 35 35 31 S13 S9 M9 L9 XL9 XL5 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES XS 39 S13

S

S S

S

RF-SR

M L XL M L XL M L XL 35 35 35 35 S9 M9 L9 XL9 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

S S

CHEEK PAD OPTIONS

RF-1100

SIZE CHEEK PAD CENTER PAD

2XL 31 XL5

3XL 31 XL5

MODULAR HELMET SIZING GUIDE SIZE SHELL EPS LINER SIDE LINER CHEEK PAD CENTER PAD

toll free / 1-800-421-7247 online / www.helmethouse.com

XS XS XS 35mm XS9

NEOTEC II

S

S

S S 35mm S9

M M M

L L L

35mm M9

35mm L9

XL L

XL XL

35mm XL9

2XL

31mm XL5

Continued on Following Page ©2019 Helmet House, Inc


69

HELMET SIZING GUIDE OPEN-FACE and HALF-HELMET SIZING GUIDE SIZE SHELL EPS LINER CHEEK LINER CHEEK PAD CENTER PAD

XS

39mm S13

S S

CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS 39mm S13

CHEEK PAD OPTIONS SIZE SHELL EPS LINER CHEEK PAD CENTER PAD

XS XS 35mm XS9

CHEEK PAD OPTIONS

S M

J-O

M M

L L L

XL L

XL XL

35mm 35mm 35mm 35mm S9 M9 L9 XL9 31mm, 39mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

2XL

31mm XL5

J-CRUISE

S

M L XL 2XL S M L XL S M L XL 35mm 35mm 35mm 35mm 31mm S9 M9 L9 XL9 XL5 31mm, 39mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

RJ PLATINUM-R

M L XL 2XL 3XL L XL 3XL M L XL 2XL 39mm 39mm 39mm 35mm 35mm 31mm M13 M9 / L13* L9 / XL13* XL5 / XL9* 2XL9 2XL5 33mm, 37mm, 41mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES (*2010 Snell Sizing)

M

S

DUAL SPORT HELMET SIZING GUIDE SIZE SHELL EPS LINER CHEEK MASK LINER CENTER PAD CHEEK PAD (Standard)

XS

S13 39mm

CHEEK PAD (Optional)

HORNET X2

S S

S

M M M

L L L

XL

XL XL

2XL

M L S9 M9 L9 XL9 XL5 35mm 35mm 35mm 35mm 31mm 31mm, 35mm, 39mm, 43mm/ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES

OFF-ROAD HELMET SIZING GUIDE SIZE SHELL EPS LINER CENTER PAD (Standard) CHEEK PAD (Standard CHEEK PAD OPTIONS

XS

S13 39mm

VFX-EVO

S S

S

M L XL 2XL M L XL M L XL S9 M9 L9 XL9 XL5 35mm 35mm 35mm 35mm 31mm ALL SIZES OF CHEEK PADS INTERCHANGEABLE IN ALL HELMET SIZES toll free / 1-800-421-7247

©2019 Helmet House, Inc

online / www.helmethouse.com


70

HELMET REPLACEMENT PARTS X-FOURTEEN CWR-F SHIELDS w/TEAR-OFF POSTS

0209-9500-00 0209-9503-00 0209-9505-00

Clear Yellow Dark Smoke

0209-9300-00 0209-9800-00

CWR-F Clear CWR-1 Clear

PINLOCK® EVO LENS

CWR-1 HARDCOAT w/ PINLOCK® PINS

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9755-00

Clear Hi-Def Yellow Dark Smoke Hi-Def Orange Light Smoke Mellow Smoke CWR-1 Photochromic

CWR-1 SPECTRA w/ PINLOCK® PINS

0209-9402-00 0209-9407-00 0209-9413-00 0209-9416-00

Blue Chrome Gold Fire Orange

BASE PLATES

0209-0605-00 0209-0505-00

Left & Right Only Full Set Incl. Screws

0204-2005-00 0204-2009-00 0204-2035-00 0204-2011-01 0204-2011-02 0204-2011-10 0204-2012-01 0204-2013-01 0204-2018-01 0204-2019-01 0204-2019-02 0204-2019-05 0204-2019-10 0204-2020-01

Black White Matte Black Assail TC-1 Assail TC-2 Assail TC-10 Marquez 4 TC-1 Bradley 3 TC-1 Marquez Motegi 2 TC-1 Brink TC-1 Brink TC-2 Brink TC-5 Brink TC-10 Marquez 5 TC-1

UPPER AIR INTAKE

LOWER AIR VENT

0204-2105-00 0204-2109-00 0204-2135-00 0204-2149-00 0204-2405-00 0204-2409-00 0204-2435-00 0204-2441-00

Black White Matte Black L. White

FRONT VENT Black White Matte Black L. Red

SIDE AIR OUTLET VENT

0204-2207-00

(1 each)

TOP AIR OUTLET VENT

0204-2307-00

(1 each)

0204-2605-00 0204-2609-00 0204-2635-00 0204-2611-01 0204-2611-02 0204-2611-10 0204-2612-01 0204-2613-01 0204-2618-01 0204-2619-01 0204-2619-02 0204-2619-05 0204-2619-10 0204-2620-01

Black White Matte Black Assail TC-1 Assail TC-2 Assail TC-10 Marquez 4 TC-1 Bradley 3 TC-1 Marquez Motegi 2 TC-1 Brink TC-1 Brink TC-2 Brink TC-5 Brink TC-10 Marquez 5 TC-1

REAR STABILIZER

GT-AIR II

LOWER AIR SPOILER

0204-3905-00

(1 each)

REAR FLAPS

0204-2807-00 0204-2907-00

Narrow Wide

CHEEK PAD SET

0204-4005-31 0204-4005-35 0204-4005-39 0204-4005-43

(31mm) (35mm) (39mm) (43mm)

0204-4904-09 0204-4904-13 0204-4905-09 0204-4905-13 0204-4906-09 0204-4906-13 0204-4907-09 0204-4907-13

S9 S13 M9 M13 L9 L13 XL9 XL13

0204-4205-04 0204-4205-05 0204-4205-06 0204-4205-07 0204-4205-08

SM MD LG XL 2XL

NECK PAD

CENTER PAD

CENTER TOP PAD

0204-4305-09 0204-4305-13 0204-4306-09 0204-4306-13

S9 S13 L9 L13

0204-4404-05 0204-4404-09 0204-4404-13 0204-4406-05 0204-4406-09 0204-4406-13

S5 S9 S13 L5 L9 L13

0204-4504-05 0204-4504-09 0204-4504-13 0204-4506-05 0204-4506-09 0204-4506-13

S5 S9 S13 L5 L9 L13

0204-4604-05 0204-4604-09 0204-4604-13 0204-4606-05 0204-4606-09 0204-4606-13

S5 S9 S13 L5 L9 L13

CENTER FRONT PAD

CENTER REAR PAD

CENTER SIDE PADS

MISC PARTS

0204-1705-00 0204-3505-00 0204-3805-00 0204-4705-00 0212-3705-00

Defroster Breath Guard Chin Strap Cvr Ear Pad Set Chin Curtain

QSV-2 SUN VISOR 0219-9003-00 0219-9005-00

Hi-Def Yellow Smoke

0217-9100-00

Clear Only (w/Pins)

CNS-1 PINLOCK® SHIELD

CNS-1 PINLOCK® EVO LENS 0209-9800-00

Clear Only

0213-0705-00 0219-0505-00 0219-0605-00

QRSA Screws Baseplate w/Screws Baseplate Only

BASE PLATES

UPPER AIR INTAKE 0219-2005-00 0219-2007-00 0219-2009-00 0219-2023-00 0219-2032-00 0219-2035-00 0219-2037-00 0219-2053-00 0219-2055-00

Black Light Silver White Brilliant Yellow Matte Blue Metallic Matte Black Matte Deep Grey Matte Black/Black Black/Black

TOP AIR OUTLET 0219-2305-00 0219-2307-00 0219-2309-00 0219-2323-00 0219-2332-00 0219-2335-00 0219-2337-00

Black Light Silver White Brilliant Yellow Matte Blue Metallic Matte Black Matte Deep Grey

CENTER PAD 0219-4205-02 0219-4205-03 0219-4205-04 0219-4205-05 0219-4205-06 0219-4205-07 0219-4205-08 0219-4305-04 0219-4305-05 0219-4305-06 0219-4405-05 0219-4405-06 0219-4405-07

(S17) (S13) (S9) (M9) (L9) (XL9) (XL5) (S5) (M5) (L5) (M13) (L13) (XL13)

CHEEK PAD SET 0219-4005-31 0219-4005-35 0219-4005-39 0219-4005-43

(31mm) (35mm) (39mm) (43mm)

MISC PARTS 0209-4705-00 0213-3505-00 0216-5105-00 0216-5205-00 0218-3705-00 0219-3805-00

Ear Pad Set Breath Guard Battery Space Cover Intercom Base Cover Chin Curtain Chin Strap Cover

toll free / 1-800-421-7247 online / www.helmethouse.com

©2019 Helmet House, Inc


71

HELMET REPLACEMENT PARTS GT-AIR QSV-1 SUN VISOR 0217-9003-00 0217-9005-00

Hi-Def Yellow Smoke

CNS-1 PINLOCK SHIELD ®

0217-9100-00

Clear Only (w/Pins)

CNS-1 PINLOCK® EVO LENS 0209-9800-00

Clear Only

BASE PLATES 0213-0705-00 0218-0505-00 0218-0605-00

QRSA Screws Baseplate w/Screws Baseplate Only

UPPER AIR INTAKE VENT 0218-2005-00 0218-2007-00 0218-2009-00 0218-2017-00 0218-2023-00 0218-2031-00 0218-2035-00 0218-2041-00 0218-2042-00 0218-2047-00 0218-2095-00

Black Light Silver White Anthracite Brilliant Yellow Shine Red Matte Black Red Matte Blue Grey White/Smoke

TOP AIR OUTLET 0218-2305-00 0218-2307-00 0218-2309-00 0218-2317-00 0218-2323-00 0218-2331-00 0218-2335-00 0218-2042-00 0218-2047-00 0218-2095-00

Black Light Silver White Anthracite Brilliant Yellow Shine Red Matte Black Black/Black White/Black White/Smoke

0218-4005-31 0218-4005-35 0218-4005-39 0218-4005-43

(31mm) (35mm) (39mm) (43mm)

CHEEK PAD SET

0218-4205-03 0218-4205-04 0218-4205-05 0218-4205-06 0218-4205-07 0218-4205-08 0218-4305-05 0218-4305-06 0218-4305-07 0218-4305-04 0218-4405-05 0218-4405-06 0213-3505-00 0217-4705-00 0218-3705-00 0218-3805-00

CENTER PAD XS SM MD LG XL 2XL (M13) OPT (L13) OPT (XL13) OPT (S5) OPT (M5 OPT (L5) OPT

MISC PARTS

Breath Guard Ear Pad Set Chin Curtain Chin Strap Cover

RF-1200

RF-SR

CWR-1 HARDCOAT w/ PINLOCK® PINS

CWR-1 HARDCOAT w/ PINLOCK® PINS

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9755-00

0209-9400-00 0209-9403-00 0209-9405-00 0209-9406-00 0209-9415-00 0209-9425-00 0209-9755-00

Clear Hi-Def Yellow Dark Smoke Hi-Def Orange Light Smoke Mellow Smoke CWR-1 Photochromic

PINLOCK EVO LENS ®

0209-9800-00

CWR-1 Clear

CWR-1 SPECTRA w/ PINLOCK® PINS 0209-9402-00 0209-9407-00 0209-9413-00 0209-9416-00 0209-0505-00 0209-0605-00 0213-0705-00

Blue Chrome Gold Fire Orange

BASE PLATE

QR-E Full Set QR-E Right & Left QRSA Screws

LOWER AIR INTAKE

PINLOCK EVO LENS ®

0209-9800-00 0209-9402-00 0209-9407-00 0209-9413-00 0209-9416-00 0209-0505-00 0209-0605-00 0213-0705-00

0209-2005-00 0209-2035-00

Black Mt. Black

0207-2205-00

0209-2405-00 0209-2435-00

Black Mt. Black

0209-2205-00 0209-2209-00 0209-2215-00 0209-2235-00

Black White Smoke Mt. Black

0209-4205-03 0209-4205-04 0209-4205-05 0209-4205-06 0209-4205-07 0209-4205-08 0209-4305-02 0209-4305-04 0209-4305-05 0209-4305-06 0209-4305-07 0209-4405-05 0209-4405-06

CENTER PAD (S13) XS (S9) SM (M9) MD (L9) LG (XL9) XL (XL5) 2XL (S17 OPT) 2XS (S5 OPT) SM (M13 OPT) MD (L13 OPT) LG (XL13 OPT) XL (M5 OPT II) MD (L5 OPT II) LG

CHEEK PAD SET 0209-4005-31 0209-4005-35 0209-4005-39 0209-4005-43

(31mm) 2XL (35mm) S-XL (39mm) XS (43mm) (OPT)

MISC PARTS 0209-3805-05 0212-3705-00 0213-3505-00 0209-4705-00

Chin Strap Cover Chin Curtain Breath Guard Ear Pad Set

QR-E Full Set QR-E Right & Left Screw Set (4)

AIR INTAKE VENTS 0207-2005-00 0207-2105-00

TOP AIR OUTLET

Blue Chrome Gold Fire Orange

BASE PLATE

Black Mt. Black

FRONT AIR INTAKE

CWR-1 Clear

CWR-1 SPECTRA w/ PINLOCK® PINS

0209-2105-00 0209-2135-00

UPPER AIR INTAKE

Clear Hi-Def Yellow Dark Smoke Hi-Def Orange Light Smoke Mellow Smoke CWR-1 Photochromic

Black Upper Black Lower

TOP AIR OUTLET Black

CENTER PAD 0207-4204-05 0207-4204-09 0207-4204-13 0207-4204-17 0207-4205-05 0207-4205-09 0207-4205-13 0207-4206-05 0207-4206-09 0207-4206-13 0207-4207-05 0207-4207-09 0207-4207-13

(S5) (S9) (S13) (S17) (M5) (M9) (M13) (L5) (L9) (L13) (XL5) (XL9) (XL13)

CHEEK PAD SET 0207-4005-31 0207-4005-35 0207-4005-39 0207-4005-43

(31mm) (35mm) (39mm) (43mm)

MISC PARTS 0207-0905-00 0207-3805-00 0212-3705-00 0213-3505-00 0217-4705-00

Defroster Chin Strap Cover Chin Curtain Breath Guard Ear Pad Set

NEOTEC II QSV-1 SUN VISOR

0217-9003-00 0217-9005-00

Hi-Def Yellow Smoke

0216-9100-00 0209-9800-00

CNS-3 Shield-Clear Lens Insert - Clear

0216-2005-00 0216-2007-00 0216-2009-00 0216-2011-00 0216-2017-00 0216-2032-00 0216-2035-00 0216-2037-00

Black Silver White Wine Anthracite Blue Matte Black MG Yellow

PINLOCK® SHIELD/LENS UPPER AIR INTAKE

TOP AIR OUTLET 0216-2305-00 0216-2307-00 0216-2309-00 0216-2311-00 0216-2317-00 0216-2332-00 0216-2335-00 0216-2337-00

Black Silver White Wine Anthracite Blue Matte Black MG Yellow

0216-4205-03 0216-4205-04 0216-4205-05 0216-4205-06 0216-4205-07 0216-4205-08 0216-4305-03 0216-4305-04 0216-4305-05 0216-4305-06 0216-4405-03 0216-4405-04 0216-4405-05 0216-4405-06 0216-4405-07

(XS9) (S9) (M9) (L9) (XL9) (XL5) (XS5) (S5) (M5) (L5) (XS13) (S13) (M13) (L13) (XL13)

0216-4005-31 0216-4005-35 0216-4005-39

(31mm) (35mm) (39mm)

CENTER PAD

CHEEK PAD SETS WITH NOISE ISOLATOR

CHEEK PAD SETS WITHOUT NOISE ISOLATOR 0216-4006-31 0216-4006-35 0216-4006-39

MISC PARTS

0216-3705-00 0216-3905-00 0216-3805-00 0216-5105-00 toll free / 1-800-421-7247 0216-5205-00 online / www.helmethouse.com 0216-9900-00 ©2019 Helmet House, Inc

(31mm) (35mm) (39mm) Chin Curtain - Mesh Chin Curtain - Leather Chin Strap Cover Battery Space Cover Intercom Base Cover SHOEI® Service Tool


72

HELMET REPLACEMENT PARTS J-CRUISE

J-O

QSV-1 SUN VISOR

CJ-3 SHIELDS

0217-9003-00 0217-9005-00 0230-6001-05 0230-6001-09

Hi-Def Yellow Smoke

V-440 VISOR Black White

PINLOCK® SHIELDS & LENS 0230-9100-00 0230-9400-00 0230-9800-00

CJ-2 Shield - Clear CJ-2SP Shield - Clear Lens Insert - Clear

UPPER AIR INTAKE 0230-2005-00 0230-2009-00 0230-2011-00 0230-2017-00 0230-2023-00 0230-2035-00 0230-2037-00

Black White Wine Anthracite Brilliant Yellow Matte Black Matte Deep Grey

TOP AIR OUTLET 0230-2305-00 0230-2309-00 0230-2311-00 0230-2317-00 0230-2323-00 0230-2335-00 0230-2337-00

Black White Wine Anthracite Brilliant Yellow Matte Black Matte Deep Grey

CHEEK PAD SET 0230-4005-31 0230-4005-35 0230-4005-39 0230-4005-43 0230-4205-03 0230-4205-04 0230-4205-05 0230-4205-06 0230-4205-07 0230-4205-08 0230-4305-05 0230-4305-06 0230-4305-07 0230-4405-04 0230-4405-05 0230-4405-06

31mm 35mm 39mm 43mm

CENTER PAD XS SM MD LG XL 2XL M13 OPT L13 OPT XL13 OPT S5 OPT M5 OPT L5 OPT

MISC PARTS 0213-0705-00 0217-4705-00 0230-0505-00 0230-0605-00 0230-3805-00

QRSA Screws Ear Pads Base Plate Full Set QRSA Set Chin Strap Cover

0231-9100-00 0231-9103-00 0231-9105-00

Clear Hi-Def Yellow Dark Smoke

CJ-3 SPECTRA SHIELDS 0231-9107-00 0231-9113-00

Silver Gold

CHEEK PAD SET 0231-4005-31 0231-4005-35 0231-4005-39 0231-4005-43 0231-4204-05 0231-4204-09 0231-4204-13 0231-4204-17 0231-4205-05 0231-4205-09 0231-4205-13 0231-4206-05 0231-4206-09 0231-4206-13 0231-4207-05 0231-4207-09 0231-4207-13

31mm 35mm 39mm 43mm

CENTER PAD S5 S9 S13 S17 M5 M9 M13 L5 L9 L13 XL5 XL9 XL13

MISC PARTS 0231-3805-00 0231-6305-00

Chin Strap Cvr Set Logo Sticker

RJ PLATINUM-R VISOR

01-349

Black

FOREHEAD VENTS 03-767 03-768

Black White

CHEEK PAD SET 01-218 01-219 01-220 01-221 01-222 01-223 01-208 01-209 01-210 01-211 01-212 01-213 01-214 01-215 01-216 01-217

31mm 3XL 33mm OPT 35mm XS/XL/2XL 37mm OPT 39mm SM/MD/LG 41mm OPT

CENTER PAD

LG XL 2XL* XS13 XS9 M13 M9 L9 XL9 XL5 *Snell 2010 Sizing

MISC PARTS ©2019 Helmet House, Inc

02-928

Chin Strap Cover

HORNET X2 V-460 VISOR: SOLIDS 0224-6001-05 0224-6001-07 0224-6001-09 0224-6001-35 0224-6001-37

Black Light Silver White Matte Black Matte Deep Grey

V-460 VISOR: GRAPHICS 0224-6011-01 0224-6011-06 0224-6011-08 0224-6012-03 0224-6012-05 0224-6012-08

Seeker TC-1 Seeker TC-6 Seeker TC-8 Navigate TC-3 Navigate TC-5 Navigate TC-8

V-460 VISOR COVER

0224-6501-05 0224-6501-07 0224-6501-09 0224-6501-35 0224-6501-37

Black Light Silver White Matte Black Matte Deep Grey

V-460 VISOR TOP BASE 0224-6601-05 0224-6601-07 0224-6601-09 0224-6601-35 0224-6601-37

Black Light Silver White Matte Black Matte Deep Grey

V-460 VISOR ACCESSORIES 0224-0705-00 0224-6401-05 0224-6801-05

Visor Screw, Set of 2 Visor Vent, Black Visor Side Base, Black

CNS-2 SHIELD 0224-9400-00 0224-9405-00

Clear Dark Smoke

SPECTRA SHIELD 0224-9407-00

Silver

EVO LENS 0224-9300-00

Clear

AERO VENTS FRONT INTAKE 0224-2005-00 0224-2007-00 0224-2009-00 0224-2035-00 0224-2037-00

Black Light Silver White Matte Black Matte Deep Grey

AERO VENTS LOWER INTAKE 0224-2105-00 0224-2107-00 0224-2109-00 0224-2135-00 0224-2137-00

Black Light Silver White Matte Black Matte Deep Grey

AERO VENTS TOP OUTLET 0224-2305-00 0224-2307-00 0224-2309-00 0224-2335-00 0224-2337-00

Black Light Silver White Matte Black Matte Deep Grey

CENTER PAD - STANDARD 0224-4205-03 0224-4205-04 0224-4205-05 0224-4205-06 0224-4205-07 0224-4205-08

S13 XS, SM S9 SM, XS M9 MD L9 LG XL9 XL, 2XL XL5 2XL

CENTER PAD - OPTIONAL 0224-4205-02 0224-4305-03 0224-4305-05 0224-4305-06 0224-4305-07 0224-4405-05 0224-4405-06

S17 OPT 2XS, SM S5 OPT XS, SM M13 OPT MD L13 OPT LG XL13 OPT XL, 2XL M5 OPT MD L5 OPT LG

CHEEK PAD SET 0224-4005-31 0224-4005-35 0224-4005-39 0224-4005-43

31mm 35mm 39mm 43mm

MISC PARTS 0209-4705-00 0212-3705-00 0213-0705-00 0218-0505-00 0218-0605-00 0224-1505-00 0224-3505-00 0224-3805-00

Ear Pad Set Chin Curtain QRSQ Screw (Set of 4) CNS-1 Base Plate Set CNS-1 Base Plate Shield Lock Breath Guard Chin Strap Cover

toll free / 1-800-421-7247 online / www.helmethouse.com


HELMET REPLACEMENT PARTS VFX-EVO OFF-ROAD VISORS

0246-6001-00 0246-6001-05 0246-6001-09 0246-6001-35 0246-6010-01 0246-6010-02 0246-6010-05 0246-6010-08 0246-6011-01 0246-6011-02 0246-6011-10 0246-6012-01 0246-6012-05 0246-6012-06 0246-6014-01 0246-6013-01 0246-6013-02 0246-6013-03

Paintable Black White Matte Black Glaive TC-1 Glaive TC-2 Glaive TC-5 Glaive TC-8 Zinger TC-1 Zinger TC-2 Zinger TC-10 Blazon TC-1 Blazon TC-5 Blazon TC-6 Brayton TC-1 Grant 3 TC-1 Grant 3 TC-2 Grant 3 TC-3

CHEEK PAD SET

0246-4005-31 0246-4005-35 0246-4005-39 0246-4005-43

31mm 35mm 39mm 43mm

CENTER PAD

0246-4204-05 0246-4204-09 0246-4204-13 0246-4204-17 0246-4205-05 0246-4205-09 0246-4205-13 0246-4206-05 0246-4206-09 0246-4206-13 0246-4207-05 0246-4207-09 0246-4207-13

5mm SM 9mm SM 13mm SM 17mm SM 5mm MD 9mm MD 13mm MD 5mm LG 9mm LG 13mm LG 5mm XL 9mm XL 13mm XL

MOUTHPIECE

0246-2101-05 0246-2101-07 0246-2101-09 0246-2101-13 0246-2101-31 0246-2101-35 0246-2101-37 0246-2101-42 0246-2101-52

Black Light Silver White LS Yellow Mt Shine Red Matte Black Deep Grey Matte Nt Blue Nt Blue

MISC PARTS

0246-1905-00 0246-1909-00 0246-2205-00 0246-2805-00 0246-3805-00

Mud Guard - Blk Mud Guard - Wht Neck Outlet Mouthpiece Filter Chin Strap Cvr

MULTITEC

X-TWELVE CW-1 HARDCOAT SHIELDS

0213-9106-00

Hi-Def Orange

PINLOCK® SHIELDS CWF-1 with TEAR-OFF POSTS

0213-9500-00 0213-9503-00 0213-9505-00

Clear Hi-Def Yellow Dark Smoke

0213-9900-00

5-Pack

CWF-1 SHIELD TEAR-OFF

CW-1 PINLOCK® EVO LENS

0209-9300-00

Clear

CW-F1 PINLOCK® EVO LENS

0213-9300-00

Clear

0213-9400-00 0213-9403-00 0213-9405-00 0213-9415-00

Clear Hi-Def Yellow Dark Smoke Light Smoke

0213-9402-00 0213-9407-00 0213-9413-00 0213-9416-00

Blue Chrome Gold Fire Orange

0213-0605-00 0213-0505-00

Left & Right Only Full Set Incl. Screws

0212-2105-00

Black

0212-2205-00 0212-2215-00

Black Smoke

0212-2005-00 0212-2008-02 0212-2010-03 0212-2011-08 0212-2012-05 0212-2013-02 0212-2013-05 0212-2018-01 0212-2018-02 0212-2019-02 0212-2020-02 0212-2020-04 0212-2023-01 0212-2023-03 0212-2023-06 0212-2024-02 0212-2025-02 0212-2025-05 0212-2026-01 0212-2027-01 0212-2027-02 0212-2027-05

Black Streamliner TC-2 Elias 2 TC-3 B-Boz TC-8 Kagayama TC-5 Kiyonari TC-2 Kiyonari TC-5 Bautista TC-1 Bautista TC-2 Reverb TC-2 Laseca TC-2 Laseca TC-4 Dajiro TC-1 Dajiro TC-3 Dajiro TC-6 Montmelo TC-2 Kagayama4 TC-2 Kagayama4 TC-5 Motegi Marquez TZ-1 Trajectory TC-1 Trajectory TC-2 Trajectory TC-5

CW-1 PINLOCK® SHIELDS

CW-1 SPECTRA SHIELDS

BASE PLATES

FRONT AIR INTAKE VENT SIDE AIR OUTLET VENT

AIR SCOOP 3 INTAKE VENTS

X-ELEVEN

CX-1V HARDCOAT SHIELD

01-422 Half Tone Smoke

CX-1V PINLOCK® LENS

TOP AIR OUTLET VENTS

0212-2305-00 0212-2308-02 0212-2310-03 0212-2318-01 0212-2318-02 0212-2319-02 0212-2320-02 0212-2320-04 0212-2323-01 0212-2323-03 0212-2323-06 0212-2324-02 0212-2325-02 0212-2325-05 0212-2326-01 0212-2327-01 0212-2327-02 0212-2327-05

Black Streamliner TC-2 Elias 2 TC-3 Bautista TC-1 Bautista TC-2 Reverb TC-2 Laseca TC-2 Laseca TC-4 Dajiro TC-1 Dajiro TC-3 Dajiro TC-6 Montmelo TC-2 Kagayama4 TC-2 Kagayama4 TC-5 Motegi Marquez TZ-1 Trajectory TC-1 Trajectory TC-2 Trajectory TC-5

AERO EDGE SPOILER 2

0212-2405-00 0212-2408-02 0212-2411-08 0212-2418-01 0212-2418-02 0212-2419-02 0212-2420-02 0212-2420-04 0212-2423-01 0212-2423-03 0212-2423-06 0212-2424-02 0212-2425-02 0212-2425-05 0212-2426-01 0212-2427-01 0212-2427-02 0212-2427-05

Black Streamliner TC-2 B-Boz TC-8 Bautista TC-1 Bautista TC-2 Reverb TC-2 Laseca TC-2 Laseca TC-4 Dajiro TC-1 Dajiro TC-3 Dajiro TC-6 Montmelo TC-2 Kagayama4 TC-2 Kagayama4 TC-5 Motegi Marquez TZ-1 Trajectory TC-1 Trajectory TC-2 Trajectory TC-5

CHEEK PAD SET

0212-4005-31 0212-4005-35 0212-4005-35 0212-4005-35 0212-4005-35 0212-4005-35 0212-4005-35 0212-4005-39 0212-4005-43 0212-4205-03 0212-4205-04 0212-4205-05 0212-4205-06 0212-4205-07 0212-4205-08 0212-3505-00 0212-3705-00 0212-3805-00

31mm OPT 35mm XS 35mm SM 35mm MD 35mm LG 35mm XL 35mm 2XL 39mm OPT 43mm OPT

CENTER PAD XS SM MD LG XL 2XL

MISC PARTS

Breath Guard Chin Curtain Chin Strap Cover

CX-1V HARDCOAT SHIELD 01-422

Half Tone Smoke

CX-1V LENS INSERT 01-513 01-514 01-520

Dark Smoke Light Smoke Clear

BASE PLATE 01-250

Full Set

CHEEK PAD SET 01-218 01-219 01-220 01-221 01-222 01-223

31mm 2XL 33mm OPT 35mm XS/SM/MD/LG 37mm OPT 39mm 2XS/SM 41mm OPT

UPPER AIR INTAKE 01-260

Black

FACE COVER PARTS 01-254 01-255 01-256

Face Cover Base Set Face Cover Screw Screw Cover

MISC PARTS 01-253 02-928

Chin Curtain Chin Strap Cover

J-WING CJ-1 SHIELD 01-201 01-202 01-204

Clear Light Smoke Dark Smoke

BASE PLATE 01-300 01-301 01-211 01-212 01-213 01-214 01-215 01-216 01-217

Base Set Screws

CENTER PAD XS13 XS9 M13 M9 L9 XL9 XL5

CHEEK PAD SET 01-218 01-219 01-220 01-221 01-222 01-223 01-303

31mm 2XL/3XL 33mm OPT 35mm XS/MD/LG/XL 37mm OPT 39mm 2XS/SM 41mm OPT

MISC PARTS

Chin Strap Cover

01-513 Lens Insert - Dark Smoke 01-514 Lens Insert - Light Smoke 01-520 Lens Insert - Clear EVO

AIR INTAKE VENTS

01-436 Air Scoop 2 - Black ©2019 Helmet House, Inc

MISC PARTS

01-432 Defroster

toll free / 1-800-421-7247 online / www.helmethouse.com

73


74

HELMET REPLACEMENT PARTS RF-1100

CW-1 HARDCOAT SHIELDS 0213-9106-00

Hi-Def Orange

PINLOCK® SHIELDS CWF-1 with TEAR-OFF POSTS

0213-9500-00 0213-9503-00 0213-9505-00

Clear Hi-Def Yellow Dark Smoke

0213-9900-00

5-Pack

CWF-1 SHIELD TEAR-OFF

CW-1 PINLOCK® EVO LENS 0209-9800-00

Clear

CWF-1 PINLOCK® EVO LENS 0213-9300-00

Clear

CW-1 PINLOCK® SHIELDS 0213-9400-00 0213-9403-00 0213-9405-00 0213-9415-00

Clear Hi-Def Yellow Dark Smoke Light Smoke

0213-9402-00 0213-9407-00 0213-9413-00 0213-9416-00

Blue Chrome Gold Fire Orange

CW-1 SPECTRA SHIELDS

BASE PLATES 0213-0505-00 0213-0605-00 0213-0705-00

Full Set Incl. Screws Left & Right Only Screws

MISC PARTS 0213-3505-00 0212-3705-00 0213-3805-05

Breath Guard Chin Curtain Chin Strap Cover

TZ-R RF-1000 CX-1V HARDCOAT SHIELD 01-422

Half Tone Smoke

CX-1V LENS INSERT 01-513 01-514 01-520

Dark Smoke Light Smoke Clear

MISC PARTS 02-928

Chin Strap Cover 2

0213-2005-00 0213-2015-00 0213-2035-00 0213-2105-00 0213-2135-00

03-735 03-736

0213-2205-00 0213-2215-00 0213-2235-00

Black Smoke Matte Black

0213-4005-31 0213-4005-33 0213-4005-35 0213-4005-37 0213-4005-39 0213-4005-41

31mm 2XL 33mm OPT 35mm XS-XL 37mm OPT 39mm 2XS 41mm OPT

CHEEK PAD SET

0213-4205-02 0213-4205-03 0213-4205-04 0213-4205-05 0213-4205-06 0213-4205-07 0213-4205-08 0213-4205-09 0213-4305-04 0213-4305-05 0213-4305-06 0213-4305-07 0213-4305-08

CENTER PAD 2XS XS SM MD LG XL 2XL 3XL S13 M13 L13 XL13 2XL13

X-SP II CX-1 HARDCOAT SHIELD 01-335

Mellow Smoke

CX-1 SHIELD w/PINS 01-511

Clear

CX-1 LENS INSERT 01-513 01-514 01-520

Dark Smoke Light Smoke Clear

MISC PARTS 02-928

Chin Strap Cover 2

RF-800 SYNCROTEC TZ-1 Z-II

Black White Black

Black Matte Black

TOP AIR OUTLET

OPEN ROAD VISOR

FOREHEAD/INTAKE VENT

Black Smoke Matte Black

LOWER AIR INTAKE

RJ-AIR RJ-AIR PLATINUM 01-350

UPPER AIR INTAKE

CX-1 HARDCOAT SHIELD 01-335

Mellow Smoke

CX-1 SHIELD w/PINS 01-511

Clear

CX-1 LENS INSERT toll free / 1-800-421-7247

01-513 01-514 01-520

online / www.helmethouse.com

Dark Smoke Light Smoke Clear

QWEST

CW-1 HARDCOAT SHIELDS 0213-9106-00

Hi-Def Orange

PINLOCK® SHIELDS CWF-1 with TEAR-OFF POSTS

0213-9500-00 0213-9503-00 0213-9505-00

Clear Hi-Def Yellow Dark Smoke

0213-9900-00

5-Pack

CWF-1 SHIELD TEAR-OFF

CW-1 PINLOCK® EVO LENS 0209-9300-00

Clear

CWF-1 PINLOCK® EVO LENS 0213-9300-00

Clear

CW-1 PINLOCK® SHIELDS 0213-9400-00 0213-9403-00 0213-9405-00 0213-9415-00

Clear Hi-Def Yellow Dark Smoke Light Smoke

0213-9402-00 0213-9407-00 0213-9413-00 0213-9416-00

Blue Chrome Gold Fire Orange

LOWER AIR INTAKE 0215-2105-00 0215-2107-00 0215-2109-00 0215-2117-00 0215-2123-00 0215-2135-00 0215-2137-00

MISC PARTS

Clear Only (w/Pins)

CNS-1 PINLOCK® EVO LENS Clear Only

UPPER INTAKE VENTS Black Light Silver White Wine Anthracite Brilliant Yellow Matte Black Matte Deep Grey

LOWER INTAKE VENTS 0217-2105-00 0217-2107-00 0217-2109-00 0217-2111-01 0217-2117-02 0217-2123-10 0217-2135-01 0217-2137-01

Black Light Silver White Wine Anthracite Brilliant Yellow Matte Black Matte Deep Grey

TOP AERO VENT OUTLETS 0217-2305-00 0217-2307-00 0217-2309-00 0217-2311-01 0217-2317-02 0217-2323-10 0217-2335-01 0217-2337-01

Breath Guard Chin Curtain Chin Strap Cover

Full Set Incl. Screws Left & Right Only Screws

NEOTEC

0217-2005-00 0217-2007-00 0217-2009-00 0217-2011-01 0217-2017-02 0217-2023-10 0217-2035-01 0217-2037-01

Black White

0213-3505-00 0212-3705-00 0215-3805-00

CNS-1 PINLOCK® SHIELD

0209-9800-00

Black Light Silver White Anthracite Brilliant Yellow Matte Black Matte Deep Grey

TOP VENT

BASE PLATES

0217-9100-00

Black Light Silver White Anthracite Brilliant Yellow Matte Black Matte Deep Grey

0215-2205-00 0215-2209-00

CW-1 SPECTRA SHIELDS

0213-0505-00 0213-0605-00 0213-0705-00

UPPER AIR INTAKE

0215-2005-00 0215-2007-00 0215-2009-00 0215-2017-00 0215-2023-00 0215-2035-00 0215-2037-00

Black Light Silver White Wine Anthracite Brilliant Yellow Matte Black Matte Deep Grey

QSV-1 SUN VISOR

0217-9003-00 0217-9005-00

Hi-Def Yellow Smoke

0217-4005-31 0217-4005-35 0217-4005-39

31mm 35mm 39mm

CHEEK PAD SET

CENTER PAD 0217-4205-03 0217-4205-04 0217-4205-05 0217-4205-06 0217-4205-07 0217-4305-03 0217-4305-04 0217-4305-05 0217-4305-06 0217-4305-07 0217-4405-03 0217-4405-04 0217-4405-05 0217-4405-06 0217-4405-07

XS SM MD LG XL-2XL OPT 13mm XS OPT 13mm SM OPT 13mm MD OPT 13mm LG OPT 13mm XL-2XL XS5 OPT S5 OPT M5 OPT L5 OPT XL5 OPT

MISC PARTS 0213-3505-00 0217-0905-00 0217-3605-00 0217-3705-00 0217-3805-00 0217-4705-00

Breath Guard Defroster Chin Curtain Base Chin Curtain Chin Strap Cover Ear Pad Set

©2019 Helmet House, Inc


HELMET REPLACEMENT PARTS VFX-W

HORNET DS DUAL SPORT VISOR

0214-6001-05 0214-6001-07 0214-6001-29 0214-6001-35 0214-6001-37

Black Light Silver Cr White Matte Black Matte Deep Grey

PINLOCK® SHIELDS & LENSES

0214-9400-00 0214-9300-00

Shield w/Pins Clear Lens Insert Clear

VENTS

03-778 Extractor Vent - White 03-735 Forehead/Intake Vent - White 03-736 Forehead/Intake Vent - Black

CHEEK PAD SET

0214-4005-31 0214-4005-35 0214-4005-39 0214-4005-43 03-760 03-761 03-762 03-763 03-764 03-765 03-766

2XS XS SM MD LG XL 2XL

0213-0705-00 0214-0505-00 0214-0615-00 0214-0815-00 0214-0905-00 0214-1100-00 0214-2105-00 0214-2805-00 0214-3505-00

(31mm) 2XL (35mm) XS, M, L, XL (39mm) XXS (43mm) OPT

CENTER PAD

MISC PARTS

QRSA Screws Base Set Shell Side Cover - Smoke Smoke Plug Defroster V-410 Screw Set Nose Cover - Black Nose Filter Chin Curtain

VFX-DT EXTRACTOR VENTS 03-778

White

FOREHEAD VENTS 03-767 03-768 03-760 03-761 03-762 03-763 03-764 03-765 03-766

Black White

Paintable Black Pure Orange Chrome White Brilliant Yellow Matte Black Light Silver Sabre TC-1 Sabre TC-2 Sabre TC-5 Sabre TC-8 Sabre TC-9 Scimitar TC-5 Scimitar TC-6 FCR-3 TC-1 FCR-3 TC-2 FCR-3 TC-5 FCR-3 TC-6 K-Dub TC-1 K-Dub TC-6 K-Dub TC-9 Dash TC-2 Dash TC-5 Dash TC-6 Illusion TC-1 Illusion TC-2 Illusion TC-6 Grant TC-1 Grant TC-2 Grant TC-4 Grant TC-5 Malice TC-1 Malice TC-2 Malice TC-5 Malice TC-8 Malice TC-9 Crosshair TC-1 Crosshair TC-2 K-Dub 2 TC-1 K-Dub 2 TC-2 K-Dub 2 TC-6

OFF-ROAD VISORS 0245-6077-01 0245-6077-02 0245-6077-06 0245-6077-07 0245-6078-02 0245-6079-01 0245-6079-02 0245-6079-04 0245-6079-05 0245-6079-08 0245-6080-02 0245-6080-11 0245-6081-01 0245-6081-02 0245-6081-10 0245-6082-01 0245-6082-02 0245-6082-03 0245-6083-01 0245-6083-02 0245-6083-10 0245-6083-11 0245-6084-01 0245-6084-03 0245-6085-01 0245-6085-04 0245-6085-08 0245-6087-01 0245-6087-02 0245-6087-05 0245-6088-01 0245-6089-01 0245-6089-02 0245-6089-08 0245-6090-02 0245-6090-03 0245-6091-01 0245-6091-04 0245-6092-01 0245-6092-02 0245-6092-04 0245-6092-05

Dissent TC-1 Dissent TC-2 Dissent TC-6 Dissent TC-7 Salute TC-2 Werx TC-1 Werx TC-2 Werx TC-4 Werx TC-5 Werx TC-8 Krack TC-2 Krack TC-11 K-Dub 3 TC-1 K-Dub 3 TC-2 K-Dub 3 TC-10 Reputation TC-1 Reputation TC-2 Reputation TC-3 Sear TC-1 Sear TC-2 Sear TC-10 Sear TC-11 Barcia TC-1 Barcia TC-3 Maelstrom TC-1 Maelstrom TC-4 Maelstrom TC-8 Block Pass TC-1 Block Pass TC-2 Block Pass TC-5 Grant 2 TC-1 Turmoil TC-1 Turmoil TC-2 Turmoil TC-8 Capacitor TC-2 Capacitor TC-3 Taka TC-1 Taka TC-4 Hectic TC-1 Hectic TC-2 Hectic TC-4 Hectic TC-5

CENTER PAD 13mm 2XS 9mm XS 13mm SM 9mm MD 9mm LG 9mm XL 5mm 2XL

CHEEK PAD SET 03-771

OFF-ROAD VISORS 0245-6001-00 0245-6001-05 0245-6001-06 0245-6001-07 0245-6001-09 0245-6001-23 0245-6001-35 0245-6001-77 0245-6066-01 0245-6066-02 0245-6066-05 0245-6066-08 0245-6066-09 0245-6067-05 0245-6067-06 0245-6068-01 0245-6068-02 0245-6068-05 0245-6068-06 0245-6069-01 0245-6069-06 0245-6069-09 0245-6070-02 0245-6070-05 0245-6070-06 0245-6071-01 0245-6071-02 0245-6071-06 0245-6073-01 0245-6073-02 0245-6073-04 0245-6073-05 0245-6074-01 0245-6074-02 0245-6074-05 0245-6074-08 0245-6074-09 0245-6075-01 0245-6075-02 0245-6076-01 0245-6076-02 0245-6076-06

39mm 2XS/SM

V-MT 03-703

Chrome

0245-4205-03 0245-4205-04 0245-4205-05 0245-4205-06 0245-4205-07 0245-4205-08 0245-4305-03 0245-4305-04 0245-4305-05 0245-4305-06 0245-4305-07

2XL XS-XL 39mm OPT

CENTER PAD XS SML MED LRG XLG 2XL XS13 OPT S13 OPT M11 OPT L13 OPT XL13 OPT

MOUTHPIECE 0245-2101-01 0245-2101-02 0245-2101-05 0245-2101-06 0245-2101-07 0245-2101-09 0245-2101-13 0245-2101-23 0245-2101-35 0245-2170-01 0245-2170-02 0245-2170-04 0245-2170-05 0245-2170-06 0245-2170-13

Red Blue Black Pure Orange Light Silver White Lumi Yellow Brilliant Yellow Matte Black Chrome Red Chrome Blue Chrome Green Chrome Black Chrome Orange Chrome Gold

MISC PARTS 0245-1015-00 Cross Vsr Screws - Smk 0245-1805-00 Tail Fin - Black 0245-1901-00 Mud Guard - Red 0245-1902-00 Mud Guard - Blue 0245-1905-00 Mud Guard - Black 0245-1909-00 Mud Guard - White 0245-3805-00 Chin Strap Cover 0245-6305-00 Visor Sticker 03-715 Cross Vsr Screws - White 03-716 Cross Vsr Screws - Black 03-717 Cross Vsr Screws - Clear 03-745 Mouthpiece Filter

NOSE COVER

VISORS

02-861

Chrome

CROSS MOUTHPIECE 03-713 03-714

Black Chrome

ST-CRUZ

FOREHEAD/INTAKE VENT

03-735 03-736 03-722

toll free / 1-800-421-7247

VFX-R AIR

CHEEK PAD SET 0245-4005-31 0245-4005-35 0245-4005-39

White Black

CHEEK PAD 37mm OPT

MISC PARTS

03-745 online / www.helmethouse.com 0245-1905-00

Mouthpiece Filter Mud Guard

OPEN ROAD VISOR 01-350

Black

ST-LE

PATENT LEATHER VISOR 03-898

Black

01-346 01-348 01-356 01-357

XS-MD (up to 9/06) LG-2XL (up to 9/06) XS-MD (from 10/06 on) LG-2XL (from 10/06 on)

EAR COVER 01-346 01-348 01-356 01-357

XS-MD (up to 9/06) LG-2XL (up to 9/06) XS-MD (from 10/06 on) LG-2XL (from 10/06 on)

EAR COVER

©2019 Helmet House, Inc

75


ACCESSORIES

76

SHOEI BACKPACK 2.0 • Interior laptop compartment fits most 17” laptops/tablets • Padded panels keep your electronics safe from impact • The main compartment fits your favorite SHOEI hat, extra layers, and swag from the races • Removable shield holder fits most SHOEI helmet shields • Adjustable, padded shoulder straps keep the wearer comfortable on and off the motorcycle • Hidden three-point buckle and flap system can cradle your SHOEI helmet while walking around • Padded back panels keep the wearer comfortable on and off the motorcycle • Side pockets with stretch netting can store your beverage • An organizational bellows pocket can expand to hold all of your essentials like keys, pens, an iPod, etc. • Soft, lined media pockets inside the main compartment and a media port at the top make listening to your media player easy • An adjustable waist strap and chest strap helps to keep the bag fitting snug • Reflective piping on the backside and shoulder straps help keep you visible at night

MSRP

$109.99

BACKPACK 2.0 Part# 0412-0105-00

Side Pockets With Stretch Netting

Adjustable Padded Shoulder Straps

Padded Inner Panels Keep Contents Safe

Three-Point Buckle and Flap System Cradles Your Helmet When It’s Off

toll free / 1-800-421-7247 Top Loading Main Compartment

Helmet Shield Case Included

online / www.helmethouse.com ©2019 Helmet House, Inc


SRL (SHOEI RIDER LINK) & SRL2 COMMUNICATION SYSTEMS

AMP UP YOUR RIDE WITH CUSTOM COMMUNICATION RECOMMENDED BY SHOEI EXCLUSIVELY FOR THE NEOTEC II & GT-AIR II

CREATED EXCLUSIVELY TO INTEGRATE WITH THE SHOEI NEOTEC II & GT-AIR II Optimal Integration Designed jointly by Sena and SHOEI, the SHOEI Rider Link (SRL) is a sleek and low profile communication system tailored specifically to the SHOEI NEOTEC II and the SRL2 for the GT-Air II. The SRL systems are virtually undetectable from the outside of the helmet, and function with a simple 3-button control, or via a Sena smartphone app. COMMUNICATION IS OUR GAME Connectivity Simplified A dual Bluetooth chip allows for up to 8 intercom connections as well as simultaneously listen to music and talking to other riders via Intercom using Audio Multitasking. When audio comes through the Intercom, music will automatically decrease in volume, and return to a normal volume when riders stop talking over the Intercom. Simply pair the SRL or SRL 2 with your smartphone to stream music, listen to GPS directions, and take and make phone calls.

SHOEI NEOTEC II

THE SRL SYSTEMS DO IT ALL A Feature Set to Keep You Moving In the Right Direction Take your ride up a notch with the stellar feature set of the SRL. In addition to the SENA SRL (SHOEI RIDER LINK) Universal and Group Intercom features, the SRL COMMUNICATION SYSTEM offers music sharing and Sena’s Advanced Noise for SHOEI NEOTEC II Control technology. Smart volume regulates the Part# 0501-0000-01 volume of your music when the environment outside of your helmet changes due to wind noise MSRP or increased speed. Built in FM radio lets riders $299.00 easily scan through and save up to ten radio stations. VERSATILE CONNECTIVITY MAKES FOR VERSATILE CAPABILITIES Stay Connected and In Control With the Sena Smartphone App Linking the SRL systems with the Sena Smartphone App (for iPhone and Android) allows you to configure device settings and access our quick guide at the click of a button. The SRL systems can also easily connect to the Sena Ride Connected App to intercom with a virtually limitless amount of riders over an infinite range, so long as you are connected to a mobile network. SRL and SRL2 GENERAL FEATURES Talk time: 10 hours Operating temperature: 14ºF - 131ºF (-10ºC - 55ºC) Speaker: driver unit 31.9 mm thickness 4.4 mm Boom microphone: length 55 mm Wire between speakers: length 85 mm Weight: Module: 100 g (3.53 oz) BATTERY Charging time: 2.5 hours Type: Lithium polymer CERTIFICATES CE, FCC, IC

SHOEI GT-AIR II

SENA SRL2 (SHOEI RIDER LINK) COMMUNICATION SYSTEM for SHOEI GT-AIR II Part# 0501-0000-02 MSRP

$299.00

BLUETOOTH Headset Profile (HSP) Hands-Free Profile (HFP) Advanced Audio Distribution Profile (A2DP) Audio Video Remote Control Profile (AVRCP) Bluetooth 4.1 Technology INTERCOM Working distance: up to 1.6 kilometers (1.0 mile) in open terrain, supports up to eight riders AUDIO Advanced Noise Control™ Built-in SBC Codec Wide volume control Sample rate: max. 48 kHz (DAC) FM RADIO Built-in FM radio with RDS AF (Radio Data System Alternate Frequencies) Radio region: Worldwide Radio frequency specifications: 76 - 108MHz 10 preset station memory with automatic scan function

toll free / 1-800-421-7247 online / www.helmethouse.com ©2019 Helmet House, Inc

77


78

COMMUNICATION ACCESSORIES

SHOEI NEOTEC

SHOEI J-CRUISE

10U BLUETOOTH COMMUNICATION SYSTEMS with REMOTE CONTROL • Bluetooth 4.1 • Talk time: 10 hours • Full helmet integration • Intercom 1.6 KM / 1.0 miles • Advanced Audio Distribution Profile (A2DP) MSRP

$299.99

MSRP

$99.00

• Remote control compatible • Four-way intercom • Voice prompts • Music sharing • Universal intercom • Advanced noise control

10U SH-12 for SHOEI NEOTEC 10U SH-13 for SHOEI J-CRUISE

0510-1201-00 0510-1301-00

10U PAD MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM for HJC

• Bluetooth 4.1 • Talk time: 10 hours • Full helmet integration • Intercom 1.6 KM / 1.0 miles • Advanced Audio Distribution Profile (A2DP) MSRP

$199.00

10U PAD for HJC IS-17 10U PAD for HJC IS-MAX 2

MSRP

0510-1701-00 0510-1702-00

HANDLEBAR REMOTE

WRISTBAND REMOTE

The SENA Handlebar Remote with joystick gives you control over your SENA BlueTooth® communication gear, while reducing the risks of taking your hands off of the handlebars while riding. Uses lithium polymer battery.

The SENA Wristband Remote gives you full control over your SENA BlueTooth® communication gear, and features glove-friendly buttons, a joystick, and longlasting battery life. Uses lithium polymer battery.

Part #0520-2001-00

MSRP

$99.00

RC4 4-BUTTON REMOTE

$99.00

• Remote control compatible • Four-way intercom • Voice prompts • Music sharing • Universal intercom • Advanced noise control

The RC4 is a sleek device, which mounts to the handlebars of your bike and offers complete control of your SENA BlueTooth® Headset. Ride safely with the convenient 4-button control at your fingertips. Uses CR2016 lithium coin battery.

RC3 3-BUTTON REMOTE Have full control over your SENA BlueTooth® communication gear at your fingertips with the versatile RC3. Uses CR2016 lithium coin battery. MSRP

$49.95

Part #0520-2301-00

Helps cut excess wind noise while communicating on the road. Pack of 5.

Part #0530-1001-00 $5.95

WORLDWIDE WALL CHARGERS

$14.95

toll free / 1-800-421-7247 online / www.helmethouse.com

Part #0530-6001-00 MSRP

$3.95

MSRP

Part #0520-2201-00

MICROPHONE SPONGES

USB POWER/ DATA CABLE

MSRP

Part #0520-2101-00

CIGARETTE LIGHTER CHARGER MSRP

$14.99

5-Piece Set Part # 0530-2001-00

5V Jack Type Part #0540-0133-00

AUDIO CABLE MSRP

$5.95

3.5mm 3 pole Part #0540-0102-00 ©2019 Helmet House, Inc

Profile for Helmet House Inc.

2019 SHOEI Catalog from Helmet House  

SHOEI motorcycle helmets section from the 2019 Helmet House dealer catalog.

2019 SHOEI Catalog from Helmet House  

SHOEI motorcycle helmets section from the 2019 Helmet House dealer catalog.