{' '} {' '}
Limited time offer
SAVE % on your upgrade.

Page 1

DIRECT ACTION PRODUCT LINE 2020

®

EN


In use for more than five years with one of the world’s most demanding units, our DIRECT ACTION® gear is now available to YOU.

DIRECT ACTION® from the outset was initiated as a project combining great design and technical capability, the experience of the design team, and the understanding of the specific needs of elite special forces operators. This combination created a gear-as-a-system approach, which means you can actually build a mission specific set of gear that is fully scalable, yet streamlined, without any unnecessary bulk or excess weight. Each part of the system, the carrier, belt, holster, pouches, pack or uniform, is a crucial part of the whole, and each part has a critical impact on mission success. When designing each element of the DIRECT ACTION® system, every detail is rigorously thought through, each buckle type is carefully chosen, each puller is the proper size; there are no compromises and no random choices. Everything must combine, leading to a system of products that will work perfectly with each other. All our tactical gear is proudly made in Poland, using only the highest quality, genuine fabrics and hardware, using our advanced, well tested and battle proven proprietary laminate. Thanks to our quality assurance, constant improvement of the gear and rigorous procedures, DIRECT ACTION® has received both ISO and AQAP certifications.

Developer disclaimer: Due to constant professional input and testing some product details in this catalog may differ from the final product. Thank you for understanding. 2


MEET THE TEAM

4

PLATFORMS 6 ▸ Plate Carriers 8 ▸ Cummerbunds 14 ▸ Front Flaps 17 ▸ Back Panels 20 ▸ Plate Carrier Accessories 23 ▸ Chest Rigs 28 ▸ Chest Rigs Accessories 33 ▸ Belts 34 ▸ Belt Sleeves 37 ▸ Suspenders 38 ▸ Panels 39 CONCEPT WORKS ▸ Spitfire Peripherical Ballistic Set ▸ Breacher Set

42 44 46

AMMO POUCHES ▸ Tac Reload ▸ Low Profile ▸ Slick ▸ Speed Reload

48 50 52 53 54

ORDINANCE POUCHES

56 – 61

UTILITY POUCHES

61 – 69

MED POUCHES

70 – 75

COMMS POUCHES

75 – 81

DUMP POUCHES

82 – 85

WEAPON ACCESSORIES ▸ Slings ▸ Holsters ▸ Supressor Covers

86 86 89 – 92 93

BACKPACKS AND BAGS ▸ Assault Packs ▸ Covert Packs ▸ Lifestyle Packs ▸ Messenger Bags APPAREL ▸ Uniforms ▸ Headwear ▸ Handwear

94 96 – 97 97 98 – 100 101 102 104 – 105 105 – 107 108 – 111

KNIVES 112 – 115 SWAG 116 – 123 SIZE CHART

124

COLOR CARD

125 3


MEET THE TEAM The greatest strength of the DIRECT ACTIONÂŽ brand is that its is conceived and built from the experience and knowledge of true professional users. Our whole team is built around Special Forces veterans, shooters, shooting instructors and designers with years of experience behind them. We not only design and build the gear, we understand it, because we actually use it. Each product is designed for specific task. Each part is carefully chosen to be the best of the best. We put each product through multiple phases of testing. Thanks to this, we are fully confident in every product we create. We never stop working on improving our gear, so that the best of the best can get the equipment they deserve.

4


5


The base for building the whole system, our innovative and lightweight plate carriers, chest rigs, belts and panels were designed to provide as much comfort and freedom of movement as possible, combining a lightweight form with maximum modularity. Our system based gear has resulted in interchangeable components for many of our products.

6


PLATFORMS PLATE CARRIERS CUMMERBUNDS FRONT FLAPS BACK PANELS PLATE CARRIER ACCESSORIES CHEST RIGS CHEST RIG ACCESSORIES BELTS BELT SLEEVES SUSPENDERS PANELS

7


SPITFIRE ® MK II

plate carrier MADE IN

POLAND

product Id: PC-SPT2-CD5

When it comes to modern tactical equipment, those not going forward are actually going backwards, so at DIRECT ACTION® we are focused on the constant evolution of our products. Thanks to the feedback from users around the world, we have been able to create a new, improved version of one of our top products, the SPITFIRE® Plate Carrier. The MK II version may look simpler, but in fact it is much more scalable and mission configurable. We’ve decided to strip the carrier of unnecessary PALS slots under the flap and on the back as well as enlarging the loop panel on the front for large LE patches, and we’ve also made it lighter than the standard version. Thanks to numerous new flaps, back panels and cummerbunds you are able to modify and personalise the carrier the way you actually need it.

Weight: 430 g / 0.95 lb – size M Sizes: M, L, XL

Specs:

• Made of Cordura® 500D fabric and proprietary laminate • Optional accessory cutaway system, compatible also with SPITFIRE® Plate Carrier • No flap included; various accessory flaps available • Slick back compatible with SPITFIRE back panels; various accessory back panels available • Minimalistic cummerbund included; various accessory cummerbunds

8

PLATFORMS ►

PLATE CARRIERS

• Back zippers compatible with Crye Precision® AVS standard • Front buckles for attaching flaps or chest rigs; buckles compatible with Mayflower®/ Velocity Systems standard • PTT mounting points • Cables/hydration tube stabilizers • Zippered chest pocket on front • Optional comfort pads, compatible with the standard SPITFIRE® Plate Carrier comfort pads


SPITFIRE ®

plate carrier MADE IN

POLAND

MADE IN

USA

product Id: PC-SPTF-CD5

Taking its name from a famous WWII fighter, our SPITFIRE® plate carrier is a streamlined and dynamic platform. Lightweight and non-restricting, this plate carrier is one of the lightest in its class. But at the same time it’s a durable platform, and is unique in its modularity - converting to a cut-away rig in just a few simple steps. SPITFIRE® allows for quick donning, doffing and medical access thanks to Hypalon pullers.The carrier’s construction also allows for easy and secure comm wires routing through the plate bag and cummerbund.

Weight: 620 g / 1.73 lb – size M Sizes: M, L, XL

Specs:

• Proprietary laser-cut laminate, Cordura® 500D and softshell construction • Optional accessory cutaway system • Front flap attached directly or via chest rig buckles in variants: PALS, kangaroo type • Configurable with no flap, wrap around style • Interchangeable cummerbund – side armor compatible • Back panel zipper attachment system compatible with Crye Precision AVS™ standard • Low profile reinforced drag handle

PLATFORMS ►

PLATE CARRIERS

• Chest Rig attachment system compatible with Mayflower ® / Velocity Systems standard • Front plate only configuration using the chest rig interface • Optional pads on front, back and shoulders area for improved airflow • Zippered chest admin pocket • PTT and comms wires / antenna routing attachment points • Accessory armor package for heavy configuration in development

9


SPITFIRE ® MK I & MKII

The differences between plate carriers DIRECT ACTION® is all about improving our products, so that they can become better and better. This is why, we've decided to create a new version of one of our core products - the SPITFIRE® plate carrier. But even though the new, MK II model is already available, we've also decided not to get rid of the basic one, so that everyone would be able to choose the carrier most suitable for them. The most important thing with the MK II is that this time, you build a carrier basically from the scratch, making it almost fully personalized. But the bigger base modularity of the SPITFIRE® MK II is not the only difference comparing to the "classic" one. Take a moment to check them all on the next page.

10

PLATFORMS ►

PLATE CARRIERS


MK I

MK II

• Larger top Velcro® panel • No MOLLE/PALS slits under the flap • No front flap in the basic setup • Lighter, more streamline construction

• Lightweight, elastic cummerbund instead of the large, modular one • Overall lighter construction • Simpler basic set without unnecessary additions

• No MOLLE/PALS on the back • No additional flap covering the adjusting system • Lighter, more streamline construction

PLATFORMS ►

PLATE CARRIERS

11


HELLCAT ®

low vis plate carrier MADE IN

POLAND

product Id: PC-HLCT-CD5

A Slick, low visibility, low profile, yet durable plate carrier designed to be used either under your jacket or as an outer ballistic vest. This is a light platform, with limited modularity. It features a fully elastic cummerbund with two carbine mags pouches and one radio pocket on each side, as well as a front flap with three elastic pouches for carbine/smg/pistol mags. The slick construction is perfect for CQB use, with almost no loose parts that can be snagged within the environment. Large Velcro® panel on the front and back for unit ID patches. The HELLCAT® is perfect whenever you want to run a lower profile, but also want to have the availability to have some more firepower at hand.

Weight: 525 g / 1.15 lb – size M Sizes: M, L, XL

Specs:

• Made of proprietary laminate, Cordura® 500D and 210D nylon fabric • Slick flap with three elastic pouches for carbine/smg/pistol magazines • Elastic cummerbund with carbine and radio pockets • Low profile drag handle

12

PLATFORMS ►

PLATE CARRIERS

• Front flap attached directly or via chest rig buckles • Compatible with all SPITFIRE® flaps and wings • Large velcro panel on front and back • PTT attachment points on front


CORSAIR®

low profile plate carrier MADE IN

POLAND

product Id: PC-CRSR-NLN

The CORSAIR® low profile plate carrier is a lightweight, slick and easily concealable ballistic vest. This simple plate carrier was designed to be worn under your clothing without any additional Velcro®, flaps,or any modularity. The CORSAIR® features a fully elastic cummerbund with inner carbine/pistol mag pockets. It’s made entirely of elastic nylon fabric to tightly fit different types of plates, without any unnecessary bulky stitching. This enables it to be concealed under your jacket or even a shirt. Made only in solid colors to blend even more with your everyday clothing – perfect for undercover or covert operations requiring hard ballistic protection (III, III+ to IV standalone - *ballistic protection not included).

Weight: 275 g / 0.60 lb – size M Sizes: M, L, XL

Specs:

• Made of stretch nylon fabric to securely accommodate ballistic protection and the user’s body. It’s everything you need and none of what you don’t • Fully elastic cummerbund with carbine/ pistol mag pockets

PLATFORMS ►

PLATE CARRIERS

• No additional Velcro® panels • Slick outer layer, without any bulky stitching • Made only in solid colors to easier blend with everyday clothing for effective concealment

13


SPITFIRE ® MK II

modular cummerbund MADE IN

POLAND

product Id: PC-SPMC-CD5

MODULAR CUMMERBUND is yet another part of the SPITFIRE® MK II system, and this classic modular cummerbund is based on the classic one from the MK I carrier. Made of laminate with a laser cut modular system on the surface, the inside is made of softshell fabric, not only to provide additional comfort, but also to create with the external part a flat, velcro–closed pocket. This cummerbund is compatible with the SPITFIRE® MK I and MK II, as well as with the HELLCAT® plate carrier.

Weight: 145 g / 0.32 lb – size M Sizes: M, L, XL

Specs:

• Made of proprietary laminate • Covered with laser cut modular system • Partially elastic construction for enhanced freedom of movement

14

PLATFORMS ►

CUMMERBUNDS

• Inner side made of elastic nylon fabric • Compatible with both SPITFIRE® MK I and MK II and HELLCAT® plate carriers


SPITFIRE ® MK II

elastic cummerbund MADE IN

POLAND

product Id: PC-SPEC-ELW

With our new SPITFIRE® MK II Plate Carrier, you are no longer forced to accept what you get, but you can actually build your own, perfect carrier. Therefore, we’ve decided to create various cummerbunds.One of them is the SPITFIRE® MK II Elastic Cummerbund. Made entirely of 100 mm/4” elastic webbing divided into sections. Each section can accommodate a single carbine magazine (AR/AK/SR or even G36 magazines). Laminate puller in each section can also be used for attaching a bungie cord, providing even more security for the mags.This cummerbund is also compatible with our standard SPITFIRE® vest.

Specs:

• Made of elastic webbing • Divided into sections that can accommodate AR/AK/SR/G36 magazine • Additional laminate pull tabs

Weight: 208 g / 0.46 lb – size M Sizes: M, L, XL

SPITFIRE ® MK II

• Anchor points for attaching bungie cord as additional security • Compatible with both SPITFIRE® MK II as well as classic SPITFIRE® Plate Carrier

elastic cummerbund slim MADE IN

POLAND

product Id: PC-SPES-ELW

SPITFIRE® MK II Plate Carrier is a fully scalable platform that can be configured specifically to your needs. This can be achieved with various flaps, cummerbunds and back panels. The SPITFIRE® MK II t is one of these options. Made entirely of single layered elastic webbing, it will help you keep your carrier in place without creating any bulk on your sides. This is a perfect option for any close quarters and vehicle-borne missions, whenever you need your equipment as slick as possible.

Specs:

Weight: 56 g / 0.12 lb – size M Sizes: M, L, XL

• Made of elastic webbing • Slick construction without any additional pouches PLATFORMS ►

CUMMERBUNDS

• Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers 15


SPITFIRE ® MK II

rapid access cummerbund MADE IN

POLAND

product Id: PC-SPRC-CD5

If you need scalable platform there is no better choice than our SPITFIRE® MK II. And this was achieved with multiple types of cummerbunds, flaps and back panels. One of them is the RAPIC ACCESS CUMMERBUND. Based on the construction of our standard modular cummerbund, it features innovative ROC buckles. The cummerbund is attached to the front just like the standard one, via hook&loop. But to open or close it, you no longer need to open the front flap, but you just pull one of the cord pullers to open the buckle, or you just slide the buckle down to close it. What is even more important, the buckles are silent. These buckles are also easier to use during the triaging the wounded. Specs:

• Made of proprietary laminate, Features innovative quick access ROC buckles • Covered with laser cut modular system, Partially elastic construction to provide freedom of movement • Inner side made of elastic nylon fabric

Weight: 208 g / 0.46 lb – size M Sizes: M, L, XL

SPITFIRE ® MK II

• Internal pocket that can accommodate side plates (additional mounting system required) or soft armor panels • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers

modular cummerbund slim MADE IN

POLAND

product Id: PC-SPMS-CD5

What makes a platform truly modular is the possibility to build it according to your needs. One of the methods of doing that with the plate carrier is the possibility to use various cummerbunds. The SPITFIRE® MK II MODULAR CUMMERBUND SLIM is one of them. Designed as a minimalistic, yet fully MOLLE/PALS compatible platform, this cummerbund is covered with laser cut modular system that allows you to mount all the pouches you need. On the other hand, since it is only a single layer and narrower than our standard modular cummerbund, it is much lighter and slicker.

Specs:

Weight: 56 g / 0.12 lb – size M Sizes: M, L, XL

16

• Covered with laser cut modular system • Single layer to be as lightweight as possible • Partially elastic construction to provide freedom of movement PLATFORMS ►

CUMMERBUNDS

• Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers • Made of proprietary laminate


SPITFIRE ® MK II

underpouch MADE IN

POLAND

product Id: PC-SPUP-CD5

The biggest issue when you carry a plate carrier and a belt is the lack of possibility to mount anything on front. And as we all know, there is never too much carrying space. Therefore, while making the SPITFIRE® MK II we’ve decided to make this little pouch. It mounts directly onto the front loop panel of the plate carrier and dangles underneath. The pouch can fit all you need – some small essentials, a cellphone, spare ear plugs, pistol mags or even an insert from one our MED pouches. The front has a large loop panel for patches, as well as a piece of laser cut modular system. This pouch is a perfect addition not only to your heavier configuration, but also for the smaller, CQB sets, when you want to place everything in front. Specs:

Weight:

68 g / 0.15 lb

SPITFIRE ® MK II MADE IN

POLAND

• Made of Cordura® 500D fabric and proprietary laminate • Large main zippered compartment • Loop panel on front, Modular system on front

• Mounts directly to the loop panel of the plate carrier • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers

slick carbine mag flap

product Id: PC-SCFP-CD5

When you want to carry your carbine mags on your plate carrier, but at the same time don’t want to have this large, bulky pouch, don’t worry – we’ve got you covered. Our SPITFIRE® MK II SLICK CARBINE MAG FLAP is a simple solution for everyone who wants his plate carrier as slick as possible. Constructed mainly of wide elastic webbing, it is divided into three section, each capable to hold one AR/AK magazine. Additionally, the pouches are compatible with bungie cord pullers. The flap can be mounted via dedicated slots in the plate carrier or via included buckles. Specs:

Weight:

99 g / 0.22 lb

• Made of proprietary laminate and elastic webbing • Can be fitted with bungie cord pull tabs • Mounted via hook&loop slots or via included buckles • Will fit three AR/AK magazines PLATFORMS ►

FRONT FLAPS

• Additional pullers for easy opening of the flap • Compatible with both SPI T FIRE ® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers

17


SPITFIRE ® MK I

triple rifle magazine flap MADE IN

POLAND

product Id: PC-R3FP-CD5

SPITFIRE® triple rifle magazine flap is additional flap for SPITFIRE® that can be used instead of the standard one. Thanks to our adjustable rifle pouches sewn directly on it’s surface, it allows carry three rifle magazines for AR, AK or SR platform. Elastic top handles made of anti-slip Hypalon secures the magazines. The front surface is covered with laser cutted MOLLE/PALS modular system. The flap mounts to the dedicated flap ports on the SPITFIRE® or to the chest rig interface via attached buckles for QD configurations.

Specs:

Weight:

• Made of proprietary laminate • Adjustable, triple rifle magazine pouch for AR, AK or SR mags

125 g / 0.34 lb

SPITFIRE ® MK II

SMG flap MADE IN

POLAND

• Front surface covered with laser cutted MOLLE/PALS system

product Id: PC-SMFP-CD5

The SPITFIRE® SMG (sub-machine gun) flap is an additional piece of gear that can be used in place of the standard SPITFIRE® flap (aka “shingle”). Thanks to the adjustable pouches sewn directly onto its surface, it enables you to carry four standard SMG mags. Elastic top pullers made of anti-slip Hypalon® secures the magazines. Front surface is covered with laser cut MOLLE/PALS modular system. Additional columns of MOLLE/PALS on each side of the pouch allows mounting of additional pouches for pistol mags, TQ etc. The flap can be attached directly to dedicated flap ports on the SPITFIRE® or via the chest rig interface, using attached buckles.

Specs:

Weight:

18

150 g / 0.33 lb

• Made of proprietary laminate • Pouch surface covered with laser cut MOLLE/PALS system

PLATFORMS ►

FRONT FLAPS

• Additional MOLLE/PALS column on each side of the pouch • Adjustable, quad SMG magazine pouch


SPITFIRE ® MK I

MOLLE flap MADE IN

POLAND

product Id: PC-MLFP-CD5

Standard MOLLE flap for SPITFIRE® available as a separate product. It allows to easily prepare many configurations of the flaps and use them for different mission types, without the need of changing all the pouches every time. The flap mounts to the dedicated flap ports on the SPITFIRE® or to the chest rig interface via attached buckles for QD configurations.

Specs:

Weight:

60 g / 0.13 lb

• Made of proprietary laminate,

SPITFIRE ® MK I

shotgun shell flap MADE IN

POLAND

• Covered with lased cutted modular MOLLE/PALS system.

product Id: PC-SSFP-CD5

Shotgun shell flap is additional flap for SPITFIRE® that can be used instead of the standard one. Elastic loops sewn it three collums onto the surface are designed to carry standard 12GA shotgun shells (the whole flap allows carring up to 21 shells). Each collumn can be easily used for different type of ammo, without the risk of mixing them, like it the standard pouch. The flap mounts to the dedicated flap ports on the SPITFIRE® or to the chest rig interface via attached buckles for QD configurations.

Specs:

Weight:

108 g / 0.22 lb

• Made of proprietary laminate

PLATFORMS ►

FRONT FLAPS

• Allows to carry up to 21 standard 12GA shotgun shells in three collumns. 19


SPITFIRE ® MK II

MOLLE panel MADE IN

POLAND

product Id: PL-SPMP-CD5

Our new SPITFIRE® MK II is not only much more scalable and mission configurable, it is also a bit more simplified and stripped of the features that are not always needed. One of these features is the modular system on the back. But what if you need the modularity of the back panel? The answer to this need would be our new SPITFIRE® MK II MOLLE PANEL. Made of proprietary laminate, this flat back panel is covered with a laser cut modular system. It is attached to the plate carrier via the zipper system. The panel features an internal pocket that can accommodate a hydration bladder or other flat objects. In the upper part of the panel there is a large loop panel that allows you to mount any patch you need. Specs:

Weight:

• Made of proprietary laminate • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® Plate Carriers • Internal compartment for hydration bladder

234 g / 0.52 lb

SPITFIRE ® MK II

utility back panel MADE IN

POLAND

• Attachable via zipper system • Large loop panel on the upper part • Covered with laser cut modular system

product Id: PL-SPUP-CD5

Sometimes you just need a little bit more carrying space, but don’t want a backpack. The answer to this need is our new SPITFIRE® MK II UTILITY BACK PANEL. Based on the SPITFIRE® ASSAULT PANEL it features not one, but two large utility pouches. Both pockets are closed with heavy duty YKK® zippers that won’t fail at the worst possible moment. Both pockets are large enough to fit a light jacket, NODs, additional ammo, spare batteries etc. Additionally, the panel has a large, flat compartment that can fit a hydration bladder. The panel is attached to the carrier via a zipper system. Specs:

Weight:

20

400 g / 0.88 lb

• Made of Cordura® 500D fabric and proprietary laminate • Additional modular system on top pocket • Compatible with both SPITFIRE® MK II as well as classic SPITFIRE® Plate Carriers

PLATFORMS ►

BACK PANELS

• Flat compartment for hydration bladder, • Attachable via zippers system • Two zippered, external pockets sewn on the surface


SPITFIRE ® MK II

backpack panel MADE IN

POLAND

product Id: PL-SPBK-CD5

SPITFIRE® MK II can be easily configured for a short mission as well as a longer patrol. To make this possible, you can attach various cummerbunds, flaps and back panels. The SPITFIRE® MK II BACKPACK PANEL is one of these options. This small day pack is attachable directly to the plate carrier via the back zipper system or can be used individually with detachable shoulder straps. The pack features a large main compartment that can fit all your essentials, as well as a hydration bladder. Additional flat front pocket can fit various smaller items. The pack is perfect for any longer patrol, especially when you don’t want additional shoulder straps to go over your carrier. Specs:

Weight:

• Made of Cordura® 500D fabric and proprietary laminate • Large, zippered main compartment • Additional flat, zippered pocket on front • Attachable to the plate carrier via zipper

699 g / 1.54 lb

SPITFIRE ® MK I

assault panel MADE IN

POLAND

• Loop panel on front of the pack • Additional, detachable shoulder straps • Covered with modular system • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® Plate Carriers

product Id: PL-SPAP-CD5

Assault panel for the SPITFIRE® plate carrier is the first of the planned series of back panels meant for the plate carrier. The design allows rapid reconfiguration by attaching to pre-arranged rear panel zippers of either the SPITFIRE® plate carrier or the HALIFAX® backpack. The assault panel pocket layout was made to fit in the CQB role. Top portion has three Velcro®–closed pouches to contain various types of flash-bangs or spare magazines. Large, zipperclosed universal cargo pouch is mounted beneath them. Its lined with soft, velour material so it can be used for carrying scratch sensitive objects, like eyepro or NV goggles. Underneath the whole back of the panel there is a flat pocket for a hydration bladder or breaching tools secured with Velcro®. Specs:

Weight:

292 g / 0.64 lb

• Made of proprietary laminate, Cordura® 500D and 210 nylon fabric • Integral SPITFIRE® plate carrier back–panel’s zipper-mounted • Large velour-lined cargo pouch PLATFORMS ►

BACK PANELS

• Three stun grenade / spare magazines pouches • Velcro®-closed full-height of the panel flat pocket underneath the external pockets

21


SPITFIRE ® MK I

breacher panel MADE IN

POLAND

product Id: PL-SPBP-CD5

The SPITFIRE® breacher panel is the second piece in the series of back panels designated for our top of the line, fully–customizable plate carrier. The design allows rapid reconfiguration for any mission by attaching a pre-fabricated panel to the rear of the SPITFIRE® plate carrier or onto the HALIFAX® backpack. The breacher panel pouch layout is the result of our experience and end-user feedback of the assault panel. The top portion has four buckle-closed pouches for flashbangs (or any standard NFDD’s) and/or smoke grenades, with MOLLE/PALS columns on its sides. A large, zippered pocket is mounted at the bottom part of the panel. The large pouch is lined with soft, velour fabric and can be used to carry scratch sensitive objects, like eye protection, NVGs, binos, etc. Between the flashbang pouches and the utility pouch there is one additional, horizontal MOLLE/PALS column designed for mounting a breaching charge pouch. The whole panel is a large, flat pocket for a hydration bladder or breaching tools, with the possibility of carrying longer tools, like a sledge hammer, through the Velcro®-closed bottom of the panel. This panel is specifically designed, yet remains incredibly versatile.

Weight:

410 g / 0.92 lb

Specs:

• Made of proprietary laminate, Cordura® MOLLE/PALS columns on sides 500D and 210D nylon fabric • Velour lined cargo pouch • Mounts to SPITFIRE® plate carrier back- • Horizontal MOLLE/PALS column for a panel zippers, and also the HALIFAX® breaching charge pouch backpack • Velcro®-closed flat pocket for hydration • Four flashbang pouches, with additional bladder or breaching tools 22

PLATFORMS ►

BACK PANELS


SPITFIRE ® MK II

chest rig interface MADE IN

POLAND

product Id: PC-SPCI-CD5

The SPITFIRE® MK II Plate Carrier is a truly unique platform. It can not only be a standard carrier, but with this additional SPITFIRE® MK II CHEST RIG INTERFACE it can be transformed into the front plate only carrier, without any back. The INTERFACE consists of the shoulder piece and small, modular side panels. It is perfect for the recon operations when you want to fight light, but at the same time you need at least the front protection. It also works perfect with any backpack.

Specs:

Weight:

• Made of proprietary laminate • Side panels are covered with laser cut modular system

210 g / 0.47 lb

SPITFIRE ® MK I

• Low profile drag handle • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers

cutaway system MADE IN

POLAND

product Id: PC-SPQR-PEN

This parachute - type retrofit system allows for immediate release and field reassemble without cutaway elements. Created for with waterborne ops in mind, it also allows to instantly assess, treat and put the armor back on the wounded teammate.

Specs:

Weight: Sizes:

115 g / 0.25 lb – size M M, L, XL

• Compatible with SPITFIRE® MK II and MK I • Available as a separate kit

PLATFORMS ►

• Can be assembled one side only if comms are routed on the other and would not release anyway

PLATE CARRIER ACCESSORIES

23


SPITFIRE ® MK I

comfort pad set MADE IN

POLAND

product Id: PC-SPCP-NLN

Comfort pad set for the SPITFIRE® plate carrier was designed to add comfort, improve air flow and moisture management while wearing the armor. The kit comprises six pads: two worn under front plate, two under rear plate and two for the shoulder straps.

Specs:

Weight:

• Multilayer construction • Sizes matching the plate carrier • Easily attachable with dedicated Velcro®

116 g / 0.26 lb

SPITFIRE ® MK I

patches on the inner side of the plate carrier • Six piece set • Compatible with SPITFIRE® MK II and MK I

MOLLE wing MADE IN

POLAND

product Id: PL-SPMW-CD5

MOLLE wing was developed to work with the SPITFIRE® plate carrier side ports. It enables attachment of spare magazine pouches or other auxiliary equipment right next to the plate, with cummerbund wraping over it, to save attachment surface on the plate carrier itself. If mounted it extends the attachment area by 2x3 (2 columns x 3 rows).

Specs:

Weight:

24

18 g / 0.04 lb

• Made of proprietary laminate • The panel is ambidextrous: can be attached on either side of the carrier • Compatible with both SPITFIRE® MK II as PLATFORMS ►

well as the classic SPITFIRE® and HELLCAT® Plate Carriers • Has two columns of three rows of MOLLE/ PALS

PLATE CARRIER ACCESSORIES


SPITFIRE ® MK I

comms wing MADE IN

POLAND

product Id: PL-SPCW-CD5

Comms wing was developed to work with the SPITFIRE® plate carrier side ports. It enables attachment of a personal radio right next to the plate, with cummerbund wraping over it, to save mounting space on the plate carrier. Height-adjustable and with expanding sides to accommodate various radio models, with elasticized loop closure to prevent loosing the contents.

Specs:

Weight:

• Made of proprietary laminate • Height- and width-adjustable to fit most radios • The panel is ambidextrous: can be

50 g / 0.11 lb

SPITFIRE ® MK I

attached on either side of the carrier • Compatible with both SPITFIRE® MK II as well as the classic SPITFIRE® and HELLCAT® Plate Carriers

side sapi mount MADE IN

POLAND

product Id: PC-SPSM-CD5

Two-part interface enabling the stabile carry of the side protective plates in a SPITFIRE® plate carrier. Fully universal, conforms the most popular side plate sizes of 6x6” and 6x8”.

Specs:

Weight:

40 g / 0.09 lb

• Made of proprietary laminate • One size fits all SPITFIRE® plate carrier sizes • Easily attachable to the cummerbund PLATFORMS ►

• Takes either 6x6” or 6x8” plates • Does not collide with optional soft ballistic panels worn inside the cummerbund

PLATE CARRIER ACCESSORIES

25


UNIVERSAL

MOLLE panel - medium MADE IN

POLAND

product Id: PL-UMPM-CD5

Medium size modular panel dedicated to the SPITFIRE® plate carrier or the MOSQUITO® modular sleeve. The dedicated design allows stable attachment under the main flap, and allows pouches to be mounted directly under the carrier, below the plate.

Specs:

Weight:

26

16 g / 0.03 lb

• Made of proprietary laminate • Will also fit the MOSQUITO® modular sleeve

PLATFORMS ►

• Can be attached under the plate pocket flap of SPITFIRE® plate carrier

PLATE CARRIER ACCESSORIES


27


TYPHOON ®

chest rig MADE IN

POLAND

product Id: CR-TPHN-CD5

TYPHOON® offers the largest attachment surface while still keeping the rig compact. Made of laminate, its laser-cut slots serve as a MOLLE/PALS compatible attachment interface. Due to its design, the user can employ either the main panel alone, add an extra chest panel or by means of an included attachment piece, carry the front ballistic plate inside the chest rig. Large mounting surface makes the TYPHOON® an ideal choice for greenside operations.

Specs:

Weight:

• Made of proprietary laminate and durable mesh • Four internal pockets closed with small Velcro® pads • Interface included to stabilize the ballistic plate in the front panel

390 g / 0.86 lb

WARWICK ®

mini chest rig MADE IN

POLAND

• Flat X-suspenders lined with mesh for extra ventilation • Suspenders have cut-outs for additional attachment options • Foldable chest panel

product Id: CR-WRWM-CD5

This is the smallest version of the WARWICK® chest rig family. Made of proprietary laminate this rig is covered with a laser cut modular system. The absence of additional ammo or utility pouches make this platform not only flat and lightweight,but also fully configurable. A flat internal pocket can hold your map, target photos and intel, and the rig can be attached directly to one of our plate carriers including the SPITFIRE® MK I and II or the HELLCAT®.

Specs:

Weight:

28

259 g / 0.57 lb

• Made of proprietary laminate • Covered with a laser cut modular system • Inner layer made of elastic nylon fabric • Internal pocket for flat objects

PLATFORMS ►

CHEST RIGS

• Detachable shoulder straps • Attachable to SPITFIRE® MK I and II and HELLCAT® plate carriers via buckles system


WARWICK ®

slick chest rig MADE IN

POLAND

product Id: CR-WRWS-CD5

The largest of the WARWICK® chest rig family has enough modular real estate to configure the rig to any type of mission, including CQB or even mountain/greenside ops. This chest rig is made of proprietary laminate covered with a laser cut molle system, without any additional utility or ammo pouches sewn onto it. The rig has three internal pockets for flat objects like maps or target photos. Thanks to the detachable shoulder straps, the chest rig can be attached directly to one of our plate carriers, including the SPITFIRE® MK I and II or the HELLCAT®.

Specs:

Weight:

• Made of proprietary laminate • Covered with a laser cut modular system • Inner layer made of elastic nylon fabric • Internal pocket for flat objects

300 g / 0.66 lb

WARWICK ®

zip front chest rig MADE IN

POLAND

• Detachable shoulder straps • Attachable to SPITFIRE® MK I and II and HELLCAT® plate carriers via buckles system

product Id: CR-WRWZ-CD5

The latest of our zippered chest rig range along with the HURRICANE® and the TEMPEST®, the WARWICK® zip front chest rig is the most lightweight, flat and most modular of the bunch. The zip front is a perfect base platform for a patrol set when, combined with a backpack. This rig is made of a proprietary laminate, without any additional utility or ammo pouches, just flat pockets in each panel for map, target photo, or intel. Thanks to the detachable shoulder straps, the chest rig can be attached directly to one of our plate carriers, including the SPITFIRE® MK I and II or the HELLCAT®. Specs:

Weight:

342 g / 0.75 lb

• Made of proprietary laminate • Covered with a laser cut modular system • Zippered front • Compatible with our Sniper Panel • Inner layer made of elastic nylon fabric PLATFORMS ►

CHEST RIGS

• Internal pockets for flat objects • Detachable shoulder straps • Attachable to SPITFIRE® MK I and II and HELLCAT® plate carriers via buckles system

29


THUNDERBOLT®

compact chest rig MADE IN

POLAND

product Id: CR-TDBT-CD5

The THUNDERBOLT® compact chest rig is a combination of DIRECT ACTION’s® two most appreciated chest rigs with additional feedback from our end-users. This small, yet versatile rig has most of the pouches from the popular HURRICANE® hybrid chest rig applied to a platform even smaller than the TIGER MOTH®. With fixed pouches for magazines, first aid kit and other essentials, it gives you the capability of carrying everything as close to your body as possible. Horizontal MOLLE/PALS row under the pouch section can be used for mounting additional utility pouches too. Fully compatible with our chest rig interface, it can be attached to the SPITFIRE® and HELLCAT® plate carriers creating a unique rapid deployment platform, unique to DIRECT ACTION® Gear.

Weight:

620 g / 1.37 lb

Specs:

• Made of proprietary laminate, Cordura® 500D with softshell interior • Integrated, adjustable pouches to hold four AR/AK/SR magazines • Two buckle-closed adjustable pouches on sides that can be used as utility pouches or a first aid kit pouch after combining it with our MED pouch, vertically mounted • Zippered utility pocket for small items • Flat inner pocket in chest panel 30

PLATFORMS ►

CHEST RIGS

• Two Velcro ® -closed, adjustable pistol magazines pouches with detachable flap • Low profile, adjustable harness with PTT slots • Horizontal MOLLE/PALS row under pouch section for mounting additional pockets • Body armor interface via buckles compatible with SPITFIRE® and HELLCAT® plate carriers


HURRICANE ®

hybrid chest rig MADE IN

POLAND

product Id: CR-HRCN-CD5

HURRICANE® is a split front, full size hybrid chest rig. Integral mag pouches provide maximum weight reduction, while MOLLE/PALS on sides gives you additional modularity. Tight split front design allows comfortable stand-alone use, while keeping your mags close when attached to plate carrier.

Specs:

Weight:

• Proprietary laminate, Cordura® 500D and 210D nylon fabric • Integral magazine pouches for up to 8xAR, 4xAK and 4xSR magazines • Fixed external pouches: two utility pouches with buckles, one zippered pouch and one with Velcro® closed flap • Flat inner pockets in each chest panel

737 g / 1.62 lb

TEMPEST ®

chest rig MADE IN

POLAND

• Adjustable harness with MOLLE/PALS or PTT slots and reinforced drag handle • Reinforced drag handle incorporated into harness design • Body armor interface via buckles • MOLLE/PALS on sides for medical/utility pouches

product Id: CR-TMPT-CD5

Stripped down and ready for action, our TEMPEST® chest rig also offers increased modularity for full user-customization. The tight split front design allows for comfortable use in stand-alone mode - and keeps your magazines close when attached to a plate carrier.

Specs:

Weight:

530 g / 1.17 lb

• Proprietary laminate, Cordura® 500D and softshell construction • Integrated, adjustable magazine pouches, will fit: 8xAR type, 4xAK type or 4xSR type magazines • PALS slots on the magazine pouches and sides, horizontal PALS slots under ammunition pouches for tourniquets, pistol magazine pouches etc., PLATFORMS ►

CHEST RIGS

• Body armor interface via buckles • Low profile, adjustable harness with slots for PTT and additional accessories attachment • Comms wires / antenna routing • Reinforced drag handle incorporated into harness design • Flat inner pockets in each chest panel 31


TIGER MOTH ®

chest rig MADE IN

POLAND

product Id: CR-TGRM-CD5

The smallest chest rig in our line, the TIGER MOTH® combines extensive customization possibilities with a compact size - for when low-profile / no bulk is a serious requirement.

Specs:

Weight:

32

405 g / 0.89 lb

• Proprietary laminate, Cordura® 500D and softshell construction • Integrated, adjustable magazine pouches, will fit: 8 x AR type, 4 x AK type or 4 x SR type magazines • MOLLE/PALS on front for additional pouches • PALS platforms on the sides for radio, medical or utility pockets, horizontal PALS slots

PLATFORMS ►

CHEST RIGS

under ammunition pouches for tourniquets, pistol magazine pouches etc. • Body armor interface via buckles • Low profile, adjustable harness with slots for PTT and additional accessories attachment • Flat inner pocket in chest panel • Comms wires / antenna routing


SNIPER PANEL ®

additional front panel MADE IN

POLAND

product Id: CR-SNPL-CD5

Additional front panel for WARWICK® Zip Front, HURRICANE® and TEMPEST® chest rigs, attachable directly to front zipper. It moves the chest rig sides out of the way, leaving only a flat front surface for a comfortable prone shooting position. Top buckles allow for fast reattachment of the shoulder straps into a more comfortable position. The panel itself has a flat zippered front pocket.

Specs:

Weight:

100 g / 0.22 lb

• 500D Cordura® and mesh construction • Quick-attachable to WARWICK® Zip Front, HURRICANE® and TEMPEST® chest rigs

PLATFORMS ►

SNIPER PANEL

• Allows for shoulder strap repositioning • Flat zippered front pocket

33


WARHAWK ®

modular rescue/gun belt MADE IN

POLAND

Weight: Sizes:

• Made of rigid, durable webbing and proprietary laminate • 45 mm wide • Partially stiffened construction

nautic rescue/gun belt MADE IN

POLAND

34

255 g / 0.56 lb – size M M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

WARHAWK® MODULAR RESCUE/GUN BELT is a new version of our standard WARHAWK® belt. The two major changes compared to the classic model are the use of an AustriAlpin® Cobra D-Ring buckle as well as a minimalistic modular system on its surface. Even though the belt is still 45 mm wide, we were able to place a specially designed system that works like the traditional 2 rows of MOLLE/PALS webbing, so you can mount not only your holster, but also any modular or belt mountable pouch. This makes the WARHAWK® MODULAR RESCUE/GUN BELT a perfect choice for anyone who wants modularity, but at the same time doesn’t want a large, bulky belt sleeve. Specs:

290 g / 0.64 lb – size M M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

WARHAWK ®

Weight: Sizes:

product Id: BT-WRHM-NLW

• Lined with loop tape compatible with our INNER BELT® • Fastened with genuine AustriAlpin® Cobra D-Ring buckle.

product Id: BT-WRHN-NLW

WARHAWK® NAUTIC is a specially designed version of our standard WARHAWK® RESCUE/GUN belt, specially designed and made for waterborne operations. As standard Cobra® buckles are not suitable for use in salt water, we’ve decided to change it to an AustriAlpin® Cobra Nautic buckle. Made entirely of steel, this buckle is not only resistant to rust, but will work even after prolonged use in a saline environment. With the exception of the buckle, the rest of the construction is the same as in the standard WARHAWK® belt.

Specs:

• Made of rigid, durable webbing • 45 mm wide • Partially stiffened construction

PLATFORMS ►

BELTS

• Fastened with genuine AustriAlpin® Cobra Nautic buckle that is resistant to rust and salt • Lined with loop tape compatible with our INNER BELT®


WARHAWK ®

rescue/gun belt MADE IN

POLAND

product Id: BT-WRHK-NLW

WARHAWK® is our answer to the customers’ inquiries about the 45 mm wide buckled belt. It is made entirely of a rigid webbing, and fastens with industry–recognized AustriAlpin Cobra® Buckle. Can be worn as stand–alone item, with MUSTANG® inner belt or as inner belt for the MOSQUITO® modular belt sleeve.

Specs:

Weight: Sizes:

220 g / 0.48 lb – size M M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

• Made of rigid, thickly woven 45 mm wide webbing • Lined with Velcro® loop • Partly stiffened for more stable carrying of pouches, holsters etc.

MUSTANG ®

rescue/gun belt MADE IN

POLAND

Weight: Sizes:

185 g / 0.41 lb – size M S 80- 90 cm | 31"-35" M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

• Fastens with AustriAlpin Cobra® Buckle • Reinforced seams in stress points • Reinforced and stiffened anchor point to attach carbine hooks, lanyards or FROG® Buckle

product Id: BT-MSTG-CD5

As sleek as its famous namesake, our MUSTANG® tapered gun belt is lightweight, slim and rigid. It can be worn alone as a trouser belt, or as a duty belt in combination with the matching inner belt, or together with the MOSQUITO® modular belt sleeve.

Specs:

• Made of heavy duty tubular webbing, proprietary laminate, lined with Velcro® loop • Bartack reinforced in stress points • Stiffened to carry weight of holsters and magazine pouches PLATFORMS ►

BELTS

• Secured with certified AustriAlpin Cobra® buckle • Anchor point for carabiner / lanyard / tether in front portion of the belt compatible with FROG® buckle or shackles. 35


MUSTANG ®

inner belt MADE IN

POLAND

Weight: Sizes:

36

57 g / 0,12 lb – size M S 80-90 cm | 31"-35" M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

product Id: BT-INBT-CD5

Our inner belt works as a stabilizer for the MUSTANG®, WARHAWK® and MOSQUITO® belts. As it attaches to the inner loop panels of those belts, it prevents ride-up during dynamic movement - or when drawing a pistol from a holster. With this belt set-up there’s no need to use suspenders or a drop leg panel in order to achieve a secure pistol draw.

Specs:

• Made of proprietary laminate and Velcro® hook • Flat, featherlight accessory to keep your pants & equipment belt where you’d

PLATFORMS ►

BELTS

expect them to be • Thin profile of the trouser belt effectively eliminates well known “buckle over buckle” discomfort


FIREFLY®

low vis belt sleeve MADE IN

POLAND

product Id: BT-FRFL-CD5

Made as a slick platform for undercover or covert use.Can be carried as an outer belt sleeve in places, where the risk of snagging must be as low as possible. Stiffened, yet very slim, it’s designated to be mounted on any 45 mm belt. The FIREFLY® has fixed, elastic pouches for pistol and carbine mags on the left side, a radio pouch on right, a first aid kit pocket on the back, and a TQ pouch on right. Additionally, on the right side of the sleeve, there is a possibility to attach an OWB (outside the waistband) pistol holster, either via popular paddle-style, or belt loops. The FIREFLY® is compatible with our inner belt thanks to its Velcro® velour lining. The profiled construction makes the belt comfortable even during prolonged wear in vehicles. Specs:

Weight: Sizes:

• Made of proprietary laminate • Velcro® velour lining for compatibility with DIRECT ACTION® Inner Belt • Fixed, elastic pouches for carbine/smg mags, pistol mags, radio, TQ and first aid kit

230 g / 0,50 lb – size M M 80 cm | 31" L 90 cm | 36" XL 100 cm | 39"

MOSQUITO ®

modular belt sleeve MADE IN

POLAND

• Compatible with OWB holsters with paddle/belt loop mounting option • Stiffened, slim, low profile construction • Fits any 45 mm belt

product Id: BT-MQMS-CD5

Our MOSQUITO® modular belt sleeve is an extremely versatile platform just like de Havilland’s ‘Wooden Wonder’ from WWII. It works well in both low–profile and heavy–load configurations. It is compatible with accessory HIP and DROP LEG panels.

Specs:

Weight: Sizes:

255 g / 0,56 lb – size M S 80- 90 cm | 31"-35" M 90-100 cm | 36"-39" L 100-110 cm | 39"-43" XL 110-120 cm | 43"-47"

• Made of proprietary laminate, stiffened and Velcro® loop lined • Designed to work as a belt sleeve for MUSTANG® and WARHAWK® rescue / gun belt, will fit most standard rescue belts • Laser cut PALS slots interchanging with vertical openings on the sides allow for PLATFORMS ►

SLEEVES

user-preferred equipment attachment options for holster, blade etc. • Additional stability can be achieved by using the MOSQUITO® modular belt sleeve together with the MUSTANG® inner belt • Can be used with low profile Y–style or H–style suspenders 37


MOSQUITO ®

Y-harness MADE IN

POLAND

product Id: HS-MQYH-CD5

Suspenders for MOSQUITO® modular belt sleeve makes your equipment more stabile and easy to cary, thanks to redistributing part of the load on your shoulders. Low profile design makes them comfortable for use under any armor carriers.

Specs:

Weight:

• Compatible with MOSQUITO® modular belt sleeve • Low profile allows the use of suspenders under body armor

84 g / 0.18 lb

MOSQUITO ®

H-harness MADE IN

POLAND

• PTT mounting points on front • Elastic part on back for more comfort • Makes carried belt more stabile thanks to 4 attachment points

product Id: HS-MQHH-CD5

An advanced suspender harness for the MOSQUITO® modular sleeve that was designed with greenside operations in mind. Profiled for better comfort and fully adjustable to fit any body shape. Mesh lined on the back for better air circulation. Low profile drag handle integrated with belt-to-harness connecting webbing enables better force distribution while evacuating casualty. The suspenders have numerous slots to enhance modularity and provide routing for PTT’s, radio wires and antennas etc.

Specs:

Weight:

38

215 g / 0.47 lb

• Compatible with MOSQUITO® modular belt sleeve • Made of proprietary laminate and durable construction mesh • Numerous slots for modularity PLATFORMS ►

SUSPENDERS

• Fully length-adjustable • Drag handle integrated with suspenders • Chest strap for better stability • Routing channels for comms


MOSQUITO ®

hip panel small MADE IN

POLAND

product Id: PL-MQPS-CD5

Small Hip Panel for MOSQUITO® Modular Belt Sleeve allows you to mount pouches lower on sides of your MOSQUITO modular belt stleeve. It also makes longer pouches more stable.

Specs:

Weight:

• Compatible with MOSQUITO® Modular Belt Sleeve • Can be used with any gun belt up to 2" wide

45 g / 0.12 lb

MOSQUITO ®

hip panel large MADE IN

POLAND

• Stiffened in order to prevent folding during use

product Id: PL-MQPL-CD5

Large Hip Panel for MOSQUITO® Modular Belt Sleeve allows you to mount pouches lower on sides of your MOSQUITO® modular belt stleeve. It also makes longer pouches more stable. Large panel can also be used as a mounting platform for any pistol holster featuring Safariland® 3-hole mounting system.

Specs:

Weight:

65 g / 0.14

• Compatible with MOSQUITO® Modular Belt Sleeve • Compatible with any pistol holster featuring Safariland® 3-hole mounting system

• Can be used with any gun belt up to 2" wide • Stiffened in order to prevent folding during use

39


MOSQUITO ®

drop leg panel MK II MADE IN

POLAND

product Id: PL-LGPN-CD5

Drop Leg Panel for MOSQUITO® Modular Belt Sleeve is a high-ride thigh rig that allows you to mount pouches directly below the MOSQUITO modular belt sleeve, and therefore save mounting space on the belt. Drop Leg Panel can also be used as a mounting platform for any pistol holster featuring Safariland® 3-hole mounting system.

Specs:

Weight:

40

135 g / 0.29 lb

• Compatible with MOSQUITO® modular belt sleeve • Can be used with any gun belt up to 2” wide • Can be used on left and right side

PLATFORMS ►

PANELS

• Compatible with any pistol holster featuring Safariland® 3-hole mounting system • Stiffened in order to prevent folding during use • Thigh strap with elastic part for stability and comfort


41


At DIRECT ACTION® we don’t just make the standard, keepin-stock items, but also work on many custom concept projects designed for specific client. It doesn't matter if this is a whole set of ballistic covers for our SPITFIRE® system or a set of specialized pouches, we are not afraid to look at anything that could increase the user’s comfort, safety, and efficiency.

42


CONCEPT WORKS PERIPHERICAL BALLISTIC SET BREACHER SET

43


SPITFIRE ®

peripherical ballistic set As we say time and again the SPITFIRE® plate carrier is one of the most scalable carriers available on the market today. It can not only be fully configured to the mission with additional flaps, wings or back panels, but it can also be easily transformed from a plate carrier to a full size vest combining not only hard, but also soft ballistic inserts. We have designed our own soft ballistic kit for our SPITFIRE® that not only works best with its design, but also give you full coverage. The whole system includes not only front, back and side panels, but also collar and arm protection, two sizes of front belly/groin protection and even an additional lumbar panel. It also features an additional panel for our MOSQUITO® belt sleeve. More importantly we are able to make soft panel covers for any type of soft ballistic protection and make it compatible with the SPITFIRE®, including panels as large as US BALCS soft ballistic inserts. Contact us for more information.

Specs:

• Made from proprietary laminate, Cordura® 500D and 210D nylon fabric • Soft panel designed to provide maximum cover without restricting freedom of movement • Panels design to fit perfectly to both SPITFIRE® plate carrier and MOSQUITO® belt sleeve • Fully scalable–you can use only needed panels, without the need of using the whole system

44

CONCEPT WORKS ►

• Whole kit compatible with SPITFIRE ® CUTAWAY SYSTEM • Available also for popular US BALCS soft ballistic panels • Can be custom made for any provided panels • Contact us for more details about the availability and possibilities of making custom kits • Ballistic panels not included

PERIPHERICAL BALLISTIC SET


front view

lumbar protection

back view

back panel

shoulder protection shoulder pad

belt pad

collar back

groin protection

front panel

CONCEPT WORKS â–º

collar front

PERIPHERICAL BALLISTIC SET

45


MAGNETIC

shotgun holder® MADE IN

POLAND

product Id: PO-MGSH-CD5

A breaching shotgun is one of the most important items to carry during any CQB operations. Our MAGNETIC SHOTGUN HOLDER® is a simple solution to carry it comfortably, without the need of any additional pouches, holsters, or webbing. MOLLE/PALS or belt mountable, it is put together using a proprietary laminate and Hypalon®, with an internal magnet that is strong enough to securely hold your shotgun or carbine in place, releasing it for immediate action with one strong pull whenever you need it. This item can also be used as a weapon catch during repelling, fast roping, and cuffing.

Specs:

Weight:

• Made of Hypalon® and proprietary laminate • Internal magnet will hold breaching shotgun or carbine

295 g / 0.65 lb

FLEX

cuff loops® MADE IN

POLAND

• Partially stiffened construction • MOLLE/PALS or belt attachable

product Id: PO-FLCL-NLN

FLEX CUFF LOOPS® is a simple, minimalistic set of elastic cuff holders made especially to work with our duty/gun belts; they allow you to carry a few sets of flex cuffs right under your belt!

Specs:

Weight:

46

9 g / 0.02 lb

• Made of elastic webbing • Attaches directly under the gun belt or belt sleeve via Velcro® CONCEPT WORKS ►

BREACHER SET

• Will hold several flex cuffs/zip ties • 5 pcs in set


EXPANDABLE

weapon catch® MADE IN

POLAND

product Id: SL-EXWC-NLW

During repelling, climbing on a ladder or fast roping there is no worse thing than your primary weapon just hanging around, hitting everything on its way! To avoid this, we've created this simple yet handy WEAPON CATCH®. Made of expandable webbing, it is mountable to any belt or MOLLE/PALS compatible surface on one end, and under the front flap of the carrier on the other. The WEAPON CATCH® is secured with a metal CLASH hook and snapshackle that gives you the ability to release your weapon with just one quick pull. The size of the WEAPON CATCH® is adjustable to fit most of long gun platforms, including SMG's, carbines or even an AR with grenade launcher. Specs:

Weight:

• Made of nylon tubular webbing with internal elastic core • Quick, one-pull opening via snapshackle • One side attaches directly to the plate

86 g / 0.19 lb

SHOTGUN

expandable sling® MADE IN

POLAND

carrier loop panel or under the belt sleeve, the other side is compatible with any MOLLE/PALS system • HK-type clip for quick fastening

product Id: SL-SSES-NLW

This single point, partially elastic sling was designed mainly for breaching shotguns. Mountable to any MOLLE/PALS plate carrier, it is long enough to allow you to shoot through locks or door pins without releasing the weapon. A snapshackle on one end is a sure method of retaining and securing the sling to the gun. The SHOTGUN EXPANDABLE SLING® works best in conjunction with the MAGNETIC SHOTGUN HOLDER®

Specs:

Weight:

86 g / 0.19 lb

• Made of nylon tubular webbing with internal elastic core • Single point, designed especially for breaching shotguns • Designed especially for mounting to the

CONCEPT WORKS ►

BREACHER SET

back of the SPITFIRE® MK II or standard • SPITFIRE® plate carrier • Can be mounted to any MOLLE/PALS compatible platform • Quick, one-pull opening via snapshackle 47


Ammunition is one of the most important things on any battlefield, as without it, your weapon won't go boom! Comfortable and secure carry of your magazines is essential so our whole range of ammo pouches is designed to fit any type of mission including dynamic assaults, long reconnaissance patrols or even covert urban operations.

48


AMMO POUCHES TAC RELOAD LOW PROFILE SLICK SPEED RELOAD

49


TAC RELOAD

pouch AR-15® MADE IN

POLAND

product Id: PO-ARTC-CD5

Dedicated double AR-style rifle magazine pouch. Box flap completely protect the magazines from the elements. Buckle closure guarantees easy and quiet opening. Integrated internal adjustment system with elastic cord allows for quick adjustment of pouch volume – from double to single magazine use.

Specs:

Weight:

• Made of proprietary laminate and Cordura® • Attaches either through PALS or via beltloops

100 g / 0.22 lb

SAW 46/48W

pouch® MADE IN

POLAND

• Detachable box flap, buckle closure • Holds 1 or 2 AR-style rifle magazines

product Id: PO-SAWP-CD5

Dedicated belt-box pouch for M249-based machine guns. Partially stiffened design sized to take either 5.56 mm (M249/Mk46) or 7.62 mm (Mk48) Light Machine Gun belt-box. Straight flap secured with a buckle guarantees safe carry and easy access to the contents. Insert included to convert into a six AR-style rifle magazine pouch. Modular panels at the bottom and sides allow for attaching additional gear directly to the pouch.

Specs:

Weight:

50

200 g / 0.44 lb

• Partly stiffened construction, made of proprietary laminate and 500D Cordura® • Dedicated to the 5.56 mm (M249/Mk46) or 7.62 mm (Mk48)

AMMO POUCHES ►

TAC RELOAD

• MOLLE/PALS panels on bottom and sides • Detachable insert for six AR-style magazines • Attaches either through PALS or via beltloops.


TAC RELOAD

pouch pistol® MK II MADE IN

POLAND

product Id: PO-PTT2-CD5

TAC RELOAD PISTOL MK II® is a development of our previous TAC RELOAD PISTOL POUCH®. The main change was to integrate our elastic cord adjustment system, enabling custom adjustment of the magazine release force, as well as reconfiguration to single-stack magazines.

Specs:

Weight:

• Made of proprietary laminate and Cordura® • Attaches either through PALS or via beltloops • Velcro®-closed flap with Hypalon® puller

34 g / 0.07 lb

TAC RELOAD

pouch rifle® MADE IN

POLAND

• Elastic cord–adjustable, fits most single–and double–stack magazines of 9 mm/.40/.45

product Id: PO-RFTC-CD5

Designed to fit all popular types of magazines (both AK and AR), our TAC RELOAD POUCH is a truly universal rifle mag pouch. Thanks to its built-in adjustable elastic cord system, the amount of tension on the magazines can be adjusted so that a partially empty pouch hold your remaining magazines/magazine just as securely as when the pouch is fully loaded.

Specs:

Weight:

85 g / 0.19 lb

• Proprietary laminate construction • Both PALS and direct gun belt mounting compatible • Holds up to 3 AR /2 AK /2 SR magazines AMMO POUCHES ►

TAC RELOAD

• Secured with adjustable Velcro flap with Hypalon® puller • Can be adjusted to carry sniper rifle mags (.338, .308) 51


LOW PROFILE

pistol pouch® MADE IN

POLAND

product Id: PO-PTLP-CD5

The LOW PROFILE PISTOL POUCH® is a key product in our LOW PROFILE kit. Thanks to this pouch you can carry two pistol magazines concealed under your clothing without the risk of either visual detection or losing them during rapid movements. The mostly elastic, partially rigid construction provides a fast draw of the magazines, while the integrated pull tabs enables you to easily re-holster them. The pouch always stays very flat, both with or without magazines, in order to prevent any snagging while operating in close quarters. Our new Velcro® based system for belt mounting gives you the availability to attach or remove the pouch from your belt as needed.

Specs:

Weight:

• Elastic, semi rigid construction made of proprietary laminate and elastic webbing • Holds most double stack pistol magazines for 9mm/.40/.45

40 g / 0.09 lb

LOW PROFILE

carbine pouch® MADE IN

POLAND

• Mounts directly to any 45 mm belt; can be mounted or removed even with your belt on • Flat profile to help avoid any snagging while working in close quarters

product Id: PO-CBLP-CD5

With this pouch, you are able to carry a carbine magazine concealed under your clothing while significantly mitigating visual detection. The mostly elastic, partially rigid construction provides a fast draw of the magazines, while the integrated pull tab assists with reholstering. The pouch rides high on your belt, so it won’t be visible from under your jacket, providing comfort even during prolonged periods of time seated in a vehicle. The pouch is always flat, with or without magazines, to prevent any snagging while operating in close quarters. Our new Velcro® based system for belt mounting gives youthe availability to attach or remove the pouch from your belt as needed. Specs:

Weight:

52

40 g / 0.09 lb

• Elastic, semi rigid construction made of proprietary laminate and elastic webbing • Even though designed mainly for the AR platform, the pouch will fit most carbine mags

AMMO POUCHES ►

LOW PROFILE

• Mounts directly to any 45 mm belt • Low profile to help avoid any snagging while working in close quarters • High ride to stay concealed and provide comfort


SLICK

pistol pouch® MADE IN

POLAND

product Id: PO-PTSL-CD5

After the success of our LOW PROFILE line, we’ve decided to create very similar pouches, but this time with the possibility to mount on any modular platform compatible with MOLLE/PALS. The SLICK PISTOL MAG POUCH® is one of these pouches, suitable to fit two double stack magazines. The pouch is made of proprietary laminate and wide elastic webbing to maintain a slick surface and remain flat when empty. These pouches are perfect whenever you would need your gear as clear as possible, without any unnecessary bulk that can snag onto the environment.

Specs:

Weight:

• Made of proprietary laminate and elastic webbing • Partially stiffened construction for easy reholstering of magazines • Will fit two most double stack magazines

37 g / 0.08 lb

SLICK

carbine pouch® MADE IN

POLAND

• Compatible with MOLLE/PALS modular system • Can be mounted on any belt up to 45 mm wide • Laminate pull tabs for easy reholstering of magazines

product Id: PO-RFSL-CD5

SLICK CARBINE MAG POUCH® is one of the new pouches based on the successful line of our Low-Profile pouches. Designed to be mounted on any MOLLE/PALS compatible surface, as well as any belt up to 45 mm wide, this pouch will fit one AR/AK magazine. Partially elastic construction will hold the magazine securely, and at the same time will stay flat when empty. This pouch is perfect whenever you would need your gear as slick as possible, without any unnecessary bulk that can snag onto the environment.

Specs:

Weight:

40 g / 0.09 lb

• Made of proprietary laminate and elastic webbing • Partially stiffened construction for easy reholstering of magazine • Will fit one AR/AK magazine AMMO POUCHES ►

SLICK

• Compatible with MOLLE/PALS modular system • Can be mounted on any belt up to 45 mm wide • Laminate pull tabs for easy reholstering of magazine 53


SPEED RELOAD

rifle pouch® MADE IN

POLAND

product Id: PO-RFSR-CD5

Open top rifle magazine pouch, designed for speed reloads but with secure magazine carry at the same time. The special internal material, combined with a limited–size top opening and tension-adjusting elastic cord, prevents the magazine from falling out if it gets snagged.

Specs:

Weight:

• Proprietary laminate, semi-rigid construction • Adjustable, holds single AR / AK / SR type magazine

80 g / 0.18 lb

SPEED RELOAD

pistol pouch® MADE IN

POLAND

• Both PALS and direct gun belt mounting compatible • PALS slots on the outside for easy stacking

product Id: PO-PTSR-CD5

Just like our rifle pouch, our SPEED RELOAD POUCH PISTOL® is designed for speed reloads but with secure magazine carry at the same time. The special internal material, combined with tension–adjusting elastic cord, prevents the magazine from falling out if it gets snagged.

Specs:

Weight:

54

34 g / 0.07 lb

• Proprietary laminate, semi-rigid construction • Both PALS and direct gun belt mounting compatible AMMO POUCHES ►

SPEED RELOAD

• Adjustable, holds most double stack pistol magazines for 9 mm /.40 /.45 as well as 4.6 mm and 5.7 mm mags


SPEED RELOAD

SMG pouch® MADE IN

POLAND

product productId: Id:PO-SMSR-CD5 PO-ARTC-CD5

Just like our rifle pouch, our SPEED RELOAD POUCH SMG® is designed for speed reloads but with secure magazine carry at the same time. The special internal material, combined with tension–adjusting elastic cord, prevents the magazine from falling out if it gets snagged.

Specs:

Weight:

56 g / 0.12 lb

• Proprietary laminate, semi-rigid construction • Both PALS and direct gun belt mounting compatible

AMMO POUCHES ►

SPEED RELOAD

• Adjustable, holds most double stack pistol magazines for 9 mm /.40 /.45 as well as 4.6 mm and 5.7 mm mags

55


Not only are your weapon and ammunition vitally important parts of your load, you also have to securely carry other stuff that goes boom like fragmentation grenades, flashbangs or shotgun shells. Our collection of ordnance pouches will carry all you need. Multiple versions of pouches give you the ability to choose the right solution for your needs.

56


ORDINANCE POUCHES FLASHBANG FRAG GRENADE SMOKE GRENADE SHOTGUN SHELL HOLDER

57


FLASHBANG

open pouch® MADE IN

POLAND

product Id: PO-FLBO-CD5

Open–top variant of the FLASHBANG POUCH®. Tighter elastic sides secure the flashbang, while adjustable height allows to fit most popular stun grenades types. Ideal when quick and quiet drawing of a flashbang is required. May also carry 40 mm grenade rounds, including the longer ones, e.g. Illumination flares.

Specs:

Weight:

• Made of proprietary laminate, • Attaches either through PALS or via beltloops, • Tight, elastic body secures the grenade without the need for flap,

35 g / 0.07 lb

FLASHBANG

pouch® MADE IN

POLAND

• Adjustable height, • Hypalon pull handle for easier inserting of the grenade, • Dedicated design secures the fuze lever.

product Id: PO-FLBG-CD5

A secure pouch for NICO, P1 and US type flashbang grenades. Can double as a pouch for 40 mm grenades, especially longer rounds (smoke, illum).

Specs:

Weight:

58

28 g / 0.08 lb

• Proprietary laminate construction • Both PALS and direct gun belt mounting compatible ORDINANCE POUCHES ►

• Elastic sides, internal safety lever sheath positioning the grenade


FLASHBANG MK II MADE IN

POLAND

pouch®

product Id: PO-FLB2-CD5

FLASHBANG MK II POUCH® is a universal pouch for NIKO/P1-type flashbang grenades. Made of proprietary laminate, the pouch combines the best features of our two current flashbang pouches. The pouch is buckle-closed with a simple, detachable flap. When not needed, both the flap and the buckle can be detached, converting the pouch into the open top one.

Specs:

Weight:

• Made of proprietary laminate • Adjustable height • Detachable flap • Closed with ITW QASM buckle; buckle can be detached when not needed

55 g / 0.12 lb

FRAG GRENADE MADE IN

POLAND

pouch MK II®

• Compatible with MOLLE/PALS modular system • Can be mounted on any belt up to 45 mm wide • Fits NIKO/P1-type flashbangs

product Id: PO-FRG2-CD5

New model of our FRAGMENTATION GRENADE POUCH®. The most important difference is substituting a classic 25 mm buckle with smaller 20 mm side release buckle. This pouch also allows for use with the UZRGM-fused grenades (e.g. RG-42, F-1, RDG-5), with upper part of the fuse protruding through a dedicated hole in the flap.

Specs:

Weight:

50 g / 0.11 lb

• Made of proprietary laminate • Elastic sides to fit most grenades • Would fit both M67-style and older (F-1, RG-42) grenades ORDINANCE POUCHES ►

• Flap closed with 20 mm buckle, • Attaches either through PALS or via beltloops, • Internal fuse lever protection system 59


SMOKE GRENADE MADE IN

POLAND

pouch®

product Id: PO-SMKE-CD5

Pouch sized to hold a standard US-type Smoke Grenade. Closed with a simple flap, guarantees safe transport and easy, silent access.

Specs:

Weight:

• Made of proprietary laminate and 500D Cordura® • Closed with a buckled flap • Internal fuse lever protection system

54 g / 0.12 lb

SHOTGUN SHELL MADE IN

POLAND

holder®

• Sized to fit standard US-style Smoke Grenades, • Attaches either through PALS or via beltloops.

product Id: PO-SSHD-CD5

SHOTGUN SHELL HOLDER® is a universal pouch that allows you to carry 25 shotgun shells. The shells are carried in elastic webbing that provide quick access to them. The pouch has stiffened, expandable construction, with the shells divided onto three sections. The pouch is a great choice not only for the operators that uses a shotgun as a primary weapon, but also for breachers, because it allows them to carry a large amount of shells in a compact, easy to use form.

Specs:

Weight:

60

102 g / 0.22 lb

• Made of proprietary laminate and 500D Cordura® • Stiffened, expandable construction • Stiffened, anti–slip handle for rapid opening of the pouch • Holds 25 shotgun shells ORDINANCE POUCHES ►

• Designed to hold 12 gauge shells • Compatible with MOLLE/PALS modular system • Can be mounted on any belt up to 45 mm wide


61


Your combat equipment contains not just ammo, but also numerous other items of equipment that you need to carry comfortably and securely whilst still be able to access easily. No matter if you need to carry rations, night vision goggles, wet weather gear, a GPS or even loose ammo, everything will fit inside one of our utility pouches. With various solutions and sizes of pouches they will fulfill all of your mission-specific requirements.

62


UTILITY POUCHES UTILITY CARGO LOW PROFILE NVG

63


UTILITY

pouch mini® MADE IN

POLAND

product Id: PO-UTMN-CD5

Versatile, multipurpose utility pouch. Made of Corudra® 500D fabric and proprietary laminate, this zippered pouch is the smallest among all our utility pouches. It will hold your GRS, goggles, multitool, notepad etc.

Specs:

Weight:

• Made of Cordura® 500D and proprietary laminate • MOLLE/PALS panel on the bottom

71 g / 0.16 lb

UTILITY

pouch small® MADE IN

POLAND

• Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Elastic organizer inside

product Id: PO-UTSM-CD5

Multipurpose, zippered utility pouch. Made of Cordura® 500D fabric and proprietary laminate. Internal elastic organizer will help position gear carried inside the pouch. It will hold goggles, small food ration, spare ammunition or two 40 mm grenades.

Specs:

Weight:

64

85 g / 0.19 lb

• Made of Cordura® 500D and proprietary laminate • MOLLE/PALS panel on the bottom UTILITY POUCHES ►

• Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Elastic organizer inside


UTILITY

pouch medium® MADE IN

POLAND

product Id: PO-UTMD-CD5

Multipurpose, versatile zippered pouch made of Cordura® 500D fabric and proprietary laminate. Internal elastic pockets will help organized gear inside. Will hold your ear protection, goggles, small food ration etc.

Specs:

Weight:

• Made of Cordura® 500D and proprietary laminate • MOLLE/PALS panel on the bottom

100 g / 0.22 lb

UTILITY

pouch large® MADE IN

POLAND

• Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Elastic organizer inside

product Id: PO-UTLG-CD5

Almost the largest of our utility pouces. This versatile, zippered pouch is constructed of Cordura® 500D and proprietary laminate. Large enough to hold small jacket, raincoat, medium size food ration etc

Specs:

Weight:

112 g / 0.24 lb

• Made of Cordura® 500D and proprietary laminate • MOLLE/PALS panel on the bottom UTILITY POUCHES ►

• Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Elastic organizer inside 65


UTILITY

pouch X-large® MADE IN

POLAND

product Id: PO-UTXL-CD5

Largest of our utility pouches. This multipurpose, zippered pouch is constructed of Cordura® 500D fabric and proprietary laminate. Internal elastic organizer will help position gear carried inside. Large enough to carry NODs, small hydration bladder or First Aid Kit

Specs:

Weight:

• Made of Cordura® 500D and proprietary laminate • MOLLE/PALS panel on the bottom

120 g / 0.26 lb

CARGO

pouch® MADE IN

POLAND

• Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Elastic organizer inside

product Id: PO-CRGO-CD5

Large multipurpose pouch to be worn on the rear part of the MOSQUITO MODULAR BELT SLEEVE® or similar belt setup. Substantial pouch capacity allows to pack all essentials, and drawstring collar secures the contents, while buckled flap keeps debris away. Modular panels sewn to the sides and bottom allow additional gear to be added. Side loops take elastic cord to reduce the empty volume.

Specs:

Weight:

66

160 g / 0.35 lb

• Made of proprietary laminate and 500D Cordura® • Attaches through PALS or directly on belt

CARGO/UTILITY ►

• Large boxy flap, side release buckle closure • Adjustable drawstring collar • Modular panels at sides and bottom


LOW PROFILE

baton pouch® MADE IN

POLAND

product Id: PO-BTLP-CD5

The LOW PROFILE BATON POUCH® is yet another pouch in our LOW PROFILE Kit. Thanks to our pouch you are able to carry a standard sized baton under your clothing without the risk of detection or it being lost during rapid movements. The mostly elastic, partially rigid construction provides fast a draw of the baton, while the integrated pull tabs make for easy re–holstering. The small hole in the bottom of the pouch allows rapid re–holstering with the baton partially or fully extended. The pouch is always very flat, both with and without a baton in it–in total it has almost the same thickness as the item you are carrying. Our new, Velcro® based system for belt mounting, gives you the availability to attach or remove the pouch from your belt as needed. Specs:

Weight:

• Elastic, semi rigid construction made of proprietary laminate and elastic webbing • Mounted directly to any 45 mm belt; can be mounted or removed even with your belt on

25 g / 0.05 lb

LOW PROFILE

cuff pouch® MADE IN

POLAND

• Flat profile to help avoid any snagging while working in close quarters • Fits the most popular batons

product Id: PO-CFLP-CD5

The LOW PROFILE CUFF POUCH® allows you to carry standard handcuffs/ mechanical restraints. The elastic, partially stiffened construction, closed with snap button provides rapid deployment of the cuffs with only one pull; at the same time keeping them secured and in place when not needed. Tight construction reduces the noise made by the cuff chain. Our new, Velcro® based system for belt mounting, gives you the availability to attach or remove the pouch from your belt as needed.

Specs:

Weight:

45 g / 0.09 lb

• Elastic, semi rigid construction made of proprietary laminate and elastic webbing • Mounted directly to any 45 mm belt; can be mounted or removed even with your belt on LOW PROFILE ►

• Fits most popular metal cuffs • Heavy duty snap button closure provide secured carrying of the cuffs, with rapid access to them when needed 67


NVG

pouch® MADE IN

POLAND

product Id: PO-NVGP-CD5

Foam-padded pouch for secure carrying popular NV goggles and monoculars, such as AN/PVS–18 or AN/PVS-21. Zipper closure secures the content while enabling silent access. Size allows carrying NV with mounting bracket on. The interior is lined with soft velour to minimize scratching of the optics. Internal zippered pocket to hold spare batteries, caps etc.

Specs:

Weight:

68

138 g / 0.30 lb

• Padded 500D Cordura® construction • Fits most popular NVGs, like AN/PVS-18, AN/PVS-21 etc. • Zipper closures provide fast and silent access

NVG POUCH ►

• Velour lining prevents optics from getting scratched • Internal zippered pocket for spare batteries and accessories • Attaches either through PALS or via beltloops


69


Unnecessary holes in your body can be a huge problem! To quickly plug them and stop the bleeding, you have to have all your medical items well organized and easily accessible, so all of our med pouches were carefully designed to carry all of the essentials in a secure way, protecting them from getting damaged or dirty. No matter what you need to carry in your med kit, we've got you covered.

70


MED POUCHES HORIZONTAL/VERTICAL TOURNIQUET SHEARS COMBAT STRETCHER

71


MED POUCH

horizontal MK II® MADE IN

POLAND

product Id: PO-MDH2-CD5

Our MED POUCH HORIZONTAL MK II® is the effect of users feedback. Slightly enlarged, partially elastic outer pouch to fit even more medical equipment, still remains very flat, same as the first generation of our MED pouches. Fits the back of our MOSQUITO MODULAR BELT SLEEVE®. The pouch features easy, ambidextrous access to the insert with interior designed to hold in place first aid essentials.

Specs:

Weight:

• Made of proprietary laminate, Cordura® 500D and 210D nylon • Attaches either through PALS or via beltloops • Designed to hold individual first aid essentials • Partially elastic cover

260 g / 0.57 lb

MED POUCH

• Ambidextrous access with quick–opening pullers • Flat design for prolonged vehicle use, but large enough to fit most popular individual first aid kits

vertical® MADE IN

POLAND

product Id: PO-MEDV-CD5

Narrow, vertical setup of the individual first aid pouch. This three piece IFAK is designed to fit on chest rig side panel or on a belt - taking similar PALS real estate as a magazine pouch.

Specs:

Weight:

72

170 g / 0.37 lb

• Proprietary laminate construction • Both PALS and direct gun belt mounting compatible • Holds carefully chosen setup of individual medical supplies

MED POUCHES ►

• External pouch is adjustable with shockcord to minimize package • Internal Foldable medical insert is a separate element and can be layed out flat or stowed into a uniform pocket or dump pouch in emergency

HORIZONTAL/VERTICAL


TOURNIQUET

pouch® MADE IN

POLAND

product Id: PO-TNQT-CD5

Marked “TQ” for easy identification, this pocket is made to carry most of the currently used tourniquet models such as SOFT-T or CAT. The key idea is to protect the life–saving device Velcro® strips from dirt that can reduce its usability in a critical situation–whilst providing quick access and a more sturdy carry method than rubber bands.

Specs:

Weight:

• Proprietary laminate construction • PALS and belt compatible, can be carried in vertical or horizontal position

43 g / 0.09 lb

TOURNIQUET

pouch open® MADE IN

POLAND

• Both PALS and direct gun belt mounting compatible • Velcro® flap secured and open top variants

product Id: PO-TNQO-CD5

Marked “TQ” for easy identification, this pocket is made to carry most of the currently used tourniquet models such as SOFT-T or CAT. The key idea is to protect the life–saving device Velcro® strips from dirt that can reduce its usability in a critical situation–whilst providing quick access and a more sturdy carry method than rubber bands.

Specs:

Weight:

34 g / 0.07 lb

• Proprietary laminate construction • PALS and belt compatible, can be carried in vertical or horizontal position MED POUCHES ►

TOURNIQUET

• Both PALS and direct gun belt mounting compatible

73


SHEARS

pouch® MADE IN

POLAND

product Id: PO-SRPV-CD5

Shears are one of the most important pieces of any first aid kit. But they are also one of the most problematic items. The quick access to them is crucial, while they are often one of the first thing that need to be used. Therefore, we’ve decided to create this simple, but handy pouch. Our SHEARS POUCH® is designed to carry a standard size shear, additionally secured by the hook&loop closed strap. The laminate construction is durable enough to last for years of service, being at the same time as light as possible. The pouches are available in two types of mounting systems – MOLLE/ PALS compatible or with hook panel to attach them to our MED pouches.

Specs:

Weight:

• Made of proprietary laminate • Fits most of the standard size shears • Shears secured with hook&loop closed strap

260 g / 0.57 lb

SHEARS

pouch modular® MADE IN

POLAND

• Available in two mounting systems – MOLLE/ PALS compatible and with hook panel for our MED pouches

product Id: PO-SRPM-CD5

Our SHEARS POUCH MODULAR® is designed to carry a standard size shear, additionally secured by the hook&loop closed strap. The laminate construction is durable enough to last for years of service, being at the same time as light as possible. The pouches are available in two types of mounting systems – MOLLE/PALS compatible or with hook panel to attach them to our MED pouches.

Specs:

Weight:

74

170 g / 0.37 lb

• Made of proprietary laminate • Fits most of the standard size shears • Shears secured with hook&loop closed strap MED POUCHES ►

SHEARS

• Available in two mounting systems – MOLLE/ PALS compatible and with hook panel for our MED pouches


COMBAT

stretcher® MADE IN

POLAND

product Id: PO-CSTR-NLN

Lightweight foldable field stretcher. Made of two layers of Nylon Micro Rip-Stop fabric to guarantee durability and light weight. Eight reinforced webbing carry handles (four to a side). Two integrated flat pockets, each the size of one half stretcher underneath the whole area of the deployed stretcher, accessible from front and rear edge. Stow pouch for folded stretcher enable mounting them onto the combat vest, belt etc. Side channels enable inserting carrying poles for easy two-man use.

Specs:

Weight:

300 g / 0.66 lb

• The stretcher is made out of two layers of lightweight Nylon fabric • Eight reinforces carry handles (four to a side) • Lightweight and compact size when folded

MED POUCHES ►

STRETCHER

• Two flat large pockets integrated into the stretcher • Stow pouch for the stretchers attaches either through PALS or via beltloops.

75


Communication on a battlefield is a key element, ultimately influencing the success or failure of your mission. Our COMMS pouch range provides a series of products for carrying most radios, target photos, maps, and intel; there are various versions designed to fit multiple mission types including full scale combat operations, CQB or even covert urban missions.

76


COMMS POUCHES UNIVERSAL LOW PROFILE/SLICK GRG JTAC

77


UNIVERSAL

radio pouch® MADE IN

POLAND

product Id: PO-RDUN-CD5

This UNIVERSAL RADIO POUCH® will securely hold and provide access to the currently most widely used radio models. External PALS allows additional equipment to be attached.

Specs:

Weight:

• Made of laminate • Adjustable for depth

62 g / 0.14 lb

LOW PROFILE

radio pouch® MADE IN

POLAND

• Robust closure with a STOCKO® fastener

product Id: PO-RDLP-CD5

The LOW PROFILE RADIO POUCH® is yet another product designed for undercover or covert operations. The partially elastic design enables a good fit for many different models of individual communication devices. The Velcro® based system fits belts up to 45 mm wide and allows attachment or removal of the pouch as needed. The pouch rides high on your belt to keep it concealed and not visually detectable from under your jacket, yet it provides comfort even during prolonged use in a vehicle.

Specs:

Weight:

78

46 g / 0.10 lb

• Elastic, semi rigid outer layer made of proprietary laminate and elastic webbing • Mounts directly to any 45 mm belt; can be mounted or removed even with your belt on COMM POUCHES ►

• Low profile to help avoid any snagging while working in close quarters • High ride to stay concealed and provide comfort


SLICK

radio pouch® MADE IN

POLAND

product Id: PO-RDSL-CD5

SLICK RADIO POUCH® is a result of the user’s feedback regarding our low-profile pouches. The idea of the SLICK RADIO POUCH® was to make a pouch as small and bulk-less pouch as possible, without compromising its features. The pouch can fit all medium size individual communication devices. The pouch is partially elastic and height adjustable to fit various models and to hold them firmly. Designed mainly for CQB operations, where having slick equipment is essential.

Specs:

Weight:

• Made of proprietary laminate and elastic webbing • Stiffened back • Can be mounted on any belt up to 45 mm wide

53 g / 0.12 lb

GRG

pouch® MADE IN

POLAND

• Partially elastic and height adjustable to fit various radios • Compatible with MOLLE/PALS modular system

product Id: PO-GRGP-NLN

Grid Reference Guide or simply GRG POUCH® is a handy, forearm mountable organizer for map, notepad, target photo or any other piece of data that you need to have with you as a hard copy. Made of lightweight nylon fabric, with silent closure system. Transparent inner pocket protects your map or photos from any damages. Adjustable elastic webbing will fit any size of the arm. Handy, elastic loop inside will hold most sharpies or roller pens.

Specs:

Weight:

95 g / 0.21 lb

• Made of lightweight nylon fabric with silent closure system • Forearm mountable via elastic, adjustable straps • Elastic loop for pen

COMM POUCHES ►

GRG POUCH

• External loop velcro for personalization combined with molle panel • Transparent pocket for map, photos etc. • Smaller pocket for notepad

79


JTAC

admin pouch® MADE IN

POLAND

product Id: PO-JTAC-CD5

JTAC ADMIN POUCH® is a compact solution to carry your smartphone, map, notepad etc during any field operations. Zippered, partially stiffened main compartment has a clam-shell style opening with the cord limiters that prevent your gear from falling out. Internal pocket is designed mainly for included map case, but will easily hold any small notepad. Additionally inside there are loops for dummy-cording and elastic loops for sharpie. Front Velcro® panel combined with MOLLE/PALS system can be used for IFF patch or flag.

Weight:

163 g / 0.36 lb

Specs:

• Made of Cordura® 500D and proprietary laminate • Zippered main compartment • One pull opening • Loop panel combined with modular system on front 80

COMM POUCHES ►

JTAC POUCH

• Foldable map cover included • Loops for sharpie • Attachable to MOLLE/PALS or directly to the gun belt via paracord loops • Fits device size up to 15 x 10 cm


81


If you empty your mag, it’s not great practise to just drop it on the ground, and this is why our compact, yet spacious dump pouches will easily retain your spent magazines or used flashbangs in order to be reused in the future. Available in various designs and sizes to fit every mission type!

82


DUMP POUCHES LOW PROFILE SLICK DUMP

83


LOW PROFILE

dump pouch® MADE IN

POLAND

product Id: PO-DPLP-NLN

If you don’t want to stash your empty mags in your jacket pocket or you need a place to put some items that you find during a search – we’ve got you covered. Our LOW PROFILE DUMP POUCH® is a flat, compact pocket, that you can easily attach to your belt and deploy in the blink of an eye. The bag will easily fit a few carbine or pistol mags, or even a full size pistol. Stiffened, rubberized handle provides you the ease of use, even without looking at the pouch. Our new Velcro® based system for belt mounting gives you the availability to attach on or remove the pouch from your belt as needed.

Specs:

Weight:

• Elastic, semi rigid outer layer made of proprietary laminate and elastic webbing • Soft, thin and packable bag, with a stiffened, rubberized handle

60 g / 0.13 lb

SLICK

dump pouch® MADE IN

POLAND

• Mounts directly to any 45 mm belt; can be attached or removed even with your belt on • Low profile to help avoid any snagging while working in close quarters

product Id: PO-DPSL-NLN

SLICK DUMP POUCH® is a versatile construction based on the successful Low-Profile pouch series. The idea of this dump pouch was to make it as compact as possible, but still large enough to fit at least few carbine and pistol magazines. The external construction is made of wide elastic webbing, to keep the pouch flat when not needed. The stiffened, anti-slip handle gives you the ability to deploy the bag with just one pull. The pouch is perfect mainly for CQB operations, when the gear should be as slick as possible to avoid snagging onto the environment. The pouch can also be used as an emergency pouch for stashing evidence during searches. Specs:

Weight:

84

53 g / 0.12 lb

• Made of proprietary laminate, elastic webbing and lightweight nylon fabric • Stiffened, anti-slip handle for rapid deployment of the bag • Large enough to fit a few carbine and pistol magazines DUMP POUCHES ►

• Can be used as emergency evidence bag during searches • Compatible with MOLLE/PALS modular system • Can be mounted on any belt up to 45 mm wide


DUMP

pouch® MADE IN

POLAND

product Id: PO-DUMP-CD5

Classic foldable bag–type pouch for empty magazine or other items than need to be quickly stowed away. Rolls neatly into a small package and can be instantly opened with a solid tug of one hand on the long Hypalon® pull tab. Bottom is made of mesh for drainage and debris, top can be tightened with a shockcord. Multiple mounting options - via belt interface (belt width up to 45mm) or using modular pouches (with at least two MOLLE columns)

Specs:

Weight:

82 g / 0.18 lb

• Cordura® 500D and proprietary laminate construction

DUMP

pouch large® MADE IN

POLAND

• PALS and belt compatible

product Id: PO-DMPL-CD5

Large, roll–up dump pouch. Made of 500D Cordura® with drawstring collar to secure contents. Empty pouch rolls into compact package–when needed can be deployed by opening Velcro® flap with a hefty pull of a Hypalon® handle. Mesh bottom prevents dirt from cumulating inside.

Specs:

Weight:

115 g / 0.25 lb

• Proprietary laminate, Cordura® 500D and 210D construction, • Stiffened outside collar to support long objects, like empty rifle magazines, DUMP POUCHES ►

• Soft inner drawstring-adjustable collar secures contents, • Attaches either through PALS or via beltloops. 85


Your weapon is the most important piece of gear you will carry, and in this section you will find all the accessories that we make to help you carry your weapon comfortably, including weapon slings, kydex holsters, and other retention items.

86


WEAPON ACCESSORIES SLINGS HOLSTERS SUPRESSOR COVER

87


PADDED

carbine sling® MADE IN

POLAND

product Id: SL-CRBP-NWL

PADDED CARBINE SLING® is yet another example of the constant evolution of Direct Action® gear. Based on our standard sling, but this time made especially for the heavier weapons or for long patrols. Padded part is made of 3 mm thick EVA foam covered with softshell fabric that protects your skin from any abrasions. The sling can be easily transformed from a two-point sling into a single-point sling.

Specs:

Weight:

• Made of nylon webbing • Part that goes around the neck is made of nylon softshell fabric padded with EVA foam • Quick release buckle on front

98 g / 0.22 lb

CARBINE

sling MK II® MADE IN

POLAND

• Can be transformed from a two-point into a single-point sling • Compatible with multiple mounting systems • Quick adjust system

product Id: SL-CRB2-NLW

Upgraded version of our carbine sling. It remains a lightweight, optimized for use as a 2–point, it is easily convertible to a single-point configuration. Durable, soft in touch softshell neck area prevents abrasion, even with prolonged use. New version, low failure rate buckle.

Specs:

Weight:

88

79 g / 0.17 lb

• Durable webbing construction • Softshell neck area to minimize abrasion during prolonged use • Hypalon® quick adjust puller SLINGS ►

• Universal, no-noise, low failure rate, adjustable paracord attachment • Heavy duty ITW Nexus® hardware


G17 OWB

kydex LIGHT holster MADE IN

POLAND

product Id: HP-OGLR-KDX

This durable pancake style holster for Glock® 17 is designed as a fail proof, emergency draw tool for CQB situations. Made to fit a suppressor ready pistol with the most popular lights on the market and red dot mounted to the slide. The adjustment screw allows for fit adjustment between different light models and adjusting the level of retention to user’s preference. Integrated into the design are 3 holes allowing for use of Safariland® accessories – such as QLS system or mounting on the 6004 holster drop leg panel.

Specs:

Weight:

• Thick, durable Kydex® construction • Lightweight, sleek design to minimize snag hazard • Compatible with Safariland® 3 hole attachment

142 g / 0.30 lb

G17 OWB

kydex NO LIGHT holster MADE IN

POLAND

• Accepts Surfire's®: X400, X400V IR, X300, X200; Streamlight's: TLR-1, TLR-2, TLR-2IRW and similar • 50 mm belt loops as standard

product Id: HP-OGSR-KDX

Durable, pancake style holster designed for Glock ® 17 pistol. Sleek construction reduces the snag hazard, while low profile of the holster makes carrying more discreet and comfortable. Trimmed down construction will be comfortable even during prolonged use in car.

Specs:

Weight:

119 g / 0.26 lb

• Thick, durable Kydex® construction • Designed for Glock® 17, will also fit Glock® 19 HOLSTERS ►

• 50 mm belt loops as standard

89


G17 OWB

zero cant NO LIGHT holster MADE IN

POLAND

product Id: HP-OGTR-KDX

Highly durable, pancake style holster designed for Glock® 17 pistols. Unique feature of this holster is the straight, not oblique construction. Also, the holster is open on the bottom, so you can use it even with compensators.

Specs:

Weight:

• Thick, durable Kydex® construction • Designed for Glock® 17, will also fit Glock® 19 • Open bottom allows using it with the com-

116 g / 0.26 lb

HK USP

NO LIGHT holster MADE IN

POLAND

pensators • Straight, not oblique construction • 50 mm belt loops as standard

product Id: HP-OUSR-KDX

Pancake style Kydex ® holster for Heckler & Koch® USP 9 mm pistol. Sleek, low profile design of the holster minimize the snag hazard, while trimmed down construction makes it comfortable to wear even in car.

Specs:

Weight:

90

130 g / 0.29 lb

• Thick, durable Kydex® construction • Designed for Heckler & Koch® USP 9 mm HOLSTERS ►

pistol • 50 mm belt loops as standard


HK SFP OWB

NO LIGHT holster MADE IN

POLAND

product Id: HP-OSSR-KDX

This durable pancake style holster for Heckler & Koch® SFP is designed to provide discreet and comfortable carry option. Every possible piece of excessive material was trimmed down to lower the profile of the holster, minimizing the snag hazard.

Specs:

Weight:

• Thick Kydex® construction • Designed for Heckler & Koch® SFP

120 g / 0.26 lb

WALTHER P99 OWB MADE IN

POLAND

NO LIGHT holster

• 50 mm belt loops as standard

product Id: HP-O9SR-KDX

Kydex® pancake style holster designed for the Walther® P99 pistol. Trimmed down construction for enhanced comfort even during prolonged use in car. Holster dedicated for pistols in both versions – with old mounting rail and newer with Picatinny-compatible variant.

Specs:

Weight:

118 g / 0.26 lb

• Durable Kydex® construction • Designed for Walthe®r P99 pistols in both HOLSTERS ►

versions • 50 mm belt loops as standard 91


UNIVERSAL IWB MADE IN

POLAND

hybrid holster

product Id: HP-IUSR-HYB

Hybrid inside waist band (IWB) holster is an ideal solution, allowing to carry weapon in full concealment, yet secured from accidental drops. Leather on the outside is soft and nice to touch, preventing edges from hurting the sides, while rigid internal structure made of Kydex® holds the weapon securely, at the same time allowing easy draw and re-holstering. Special profile of the holster allows it to fit multiple handgun models. Metal clips guarantee stabile mounting of the holster.

Specs:

Weight:

• Hybrid design, made of leather and Kydex® • 45 mm belt metal clips for mounting the holster

116 g / 0.26 lb

HOLSTER

MOLLE wrap MADE IN

POLAND

• Single holster fits most double stack autos: Glock® 17, H&K® USP/SFP, Walther® P99, Sig Sauer® P228/9, XDM etc.

product Id: PO-HSMW-CD5

Holster MOLLE wrap is a quick-mountable panel, dedicated for Kydex® OWB pancake-style holsters. Allows the user to attach small footprint modular pouches on the face of the holster.

Specs:

Weight:

92

12 g / 0.03 lb

• Made of laser-cut proprietary laminate • Fits all DIRECT ACTION® Kydex® OWB holsters HOLSTERS ►

• Easy and quick set up


SILENCER

cover MADE IN

POLAND

product Id: GA-SLCS-AFG

During intensive shooting with a silencer, the temperature of the can is so high that it not only can easily burn you, but also, because of the mirage, can affect your sight and therefore accuracy. Or silencer cover is thick enough to minimize both of these effects, but at the other hand is will not add too much weight to the front of the gun. Even though the cover is designed for the short ROTEX silencer, it is adjustable enough to fit even bigger ones. Specs:

• Made of aluminum covered fiberglass fabric and Cordura® 500D • Prevents mirage effect made by hot silencer

• Protects agains heat burns from hot silencer • Designed for 12 cm long and 40 mm diameter silencers

disclaimer:

Weight:

168 g / 0.37 lb

Even though the cover will withstand continues shooting of .223/.308 weapons, it is not meant to be used with automatic fire.

SUPRESSOR COVER ►

93


We not only make tactical fighting gear, but we also provide solutions for load carriage. Our whole range of bags and backpacks can work for any mission type, including long range recon, short patrol duties, or even assaults and covert operations.

94


BACKPACKS AND BAGS ASSAULT PACKS COVERT PACKS LIFESTYLE PACKS MESSENGER BAGS

95


HALIFAX®

medium backpack

product Id: BP-HFXM-CD5

The HALIFAX® medium backpack is a fully mission-configurable patrol pack. It futures a large main compartment closed with YKK® #10 zippers. The interior is lined with velour fabric that allows mounting of additional pouches. The back of the interior panel is also covered with laser cut MOLLE/PALS, to re–configure this pack for a medical pack, assault pack, breacher pack or even a radio pack with internal anchor points. The top part of the flap has two additional pockets, with one of them lined with velour. The outer layer of the pack is covered with laser cut MOLLE/PALS. Heavy duty shoulder straps will redistribute the weight of the carried gear. Additional anchor points on bottom and sides, along with reinforced construction of the whole pack make it “jumpable” for airborne operations. Zippers on front, the same as on the rear panel of SPITFIRE®, allow mounting any of our back panels, making the HALIFAX® even more scalable.

Weight:

1780 g / 3.92 lb

Specs:

• Made of proprietary laminate, Cordura® 500D and 210D nylon fabric • Laser cut MOLLE/PALS on front and sides • Zippers compatible with SPITFIRE ® additional back panels • Interior covered with Velcro® velour; back panel also covered with • laser cut MOLLE/PALS system • Internal anchor points for radio pouch, additional zipper for cables/antenna 96

BACKPACKS & BAGS ►

• Inner compartment for hydration bladder; internal mesh pocket on the flap • Two outer pockets, one of them lined with velour • Two small pockets on sides • Profiled, heavy duty shoulder straps • Anatomically profiled back • Clamshell type flat opening of the pack • Jumpable thanks to outer anchor points and reinforcements at key points

ASSAULT PACKS


MINIMALIST®

backpack

product Id: BP-MLBP-NLN

Sometimes you just need some additional gear with you, but at the same time you are aware that each gram of your gear counts. This is when our MINIMALISTIC® PACK comes on the scene. Made of lightweight nylon fabric, this pack will fit all your essentials like water, food, spare clothes or extra ammo. Large pocket on front will accommodate additional load. The front beavertail is large enough to fit even a fully equipped helmet. This pack is just great for any type of patrol. Specs:

Weight:

• Made of nylon fabric • Compression straps on sides, Reinforced bottom • Two side water bottle pockets, Large beavertail on front • Stiffened back covered with 3D mesh

520 g / 1.15 lb

DRAGONFLY®

low profile gun pack MADE IN

POLAND

Weight: 945 g / 2.08 lb Capacity: 13,5 l / 824 cu in Dimension: 54 x 36 x 7 cm / 21 x 14 x 3 in

• Large external pocket in upper part of the pack with flat zippered pocket underneath • Large zippered main compartment compatible with hydration bladders • Detachable shoulder straps

product Id: BP-DGFL-CD5

During undercover operations you may need some extra firepower. Concealing your carbine can also be difficult, but our DRAGONFLY® is the solution to this problem. Externally it looks like just another civilian backpack. When you unzip it, you have immediate access to your main gun. It fits a stripped down 10.5” barrel AR, MP5 with collapsible stock, UMP etc. The interior is lined with Velcro® velour fabric for personalization. Shoulder straps can be hidden, transforming it into a handheld briefcase, that imitates large laptop case.

Specs:

• Will fit MP5, UMP or stripped down 10.5” barrel AR • Velcro® mountable mag pouches included BACKPACKS & BAGS ►

COVERT PACKS

• Interior lined with Velcro® velour for additional personalization • Low profile shoulder straps can be hidden 97


DRAGON EGG ®

backpack MK II

product Id: BP-DEGG-CD5

The DRAGON EGG® MK II is a 25+ liter backpack suitable for either short patrol duties or larger EDC pack. The pack features three zippered compartments. The main compartment has an internal hydration sleeve and mesh pocket. The main compartment also has a center tube exit for a hydration tube. The rear pocket features a padded sleeve which can be used for safely carrying multiband radio devices or up to a 15” laptop. The front pocket features a zippered mesh pocket and internal organizer for notepads, GPS, writing utensil, and other small essentials. 2 redesigned side pockets can carry small and flat items. The pockets are equipped with elastic to expand to fit a standard U.S. canteen or 1 liter nalgene water bottle. Backpack also has a soft velour lined zippered pocket for glasses, cell phone, etc. The pack also has daisy chain webbing that runs along the front panel seam for attaching any carabiners or similar gear to the pack. Laser-cut system compatible with MOLLE/PALS makes the backpack not only fully modular, but also still maintains a low profile look. Thanks to the egg shape, the pack has a smaller height and width than other packs with similar capacity and makes it more comfortable with belt kits or ballistic vests. Suspension system is based on comfortable shoulder straps and internal stiffener in the back. Waistbelt is detachable and can be stowed away. Made of durable 500D Cordura® nylon fabric with water resistant coating. Combat Vent System®, the innovative ventilation system used in backpacks, and provides increased comfort for their users. Made of contoured foam profiles with multiple air channels that are combined with airy mesh, CVS® keeps the pack off the back, which enhances air circulation preventing heat build-up and sweating. Weight: 1620 g / 3.49 lb Capacity: 25 l / 1526 cu in Dimension: 48 x 27 x 18 cm / 19 x 10.6 x 7 in

Specs:

• Cordura 500D laminate construction • Laser cut PALS/MOLLE on front and sides • Daisy chain webbing for extra gear/ carabiners attachment • Hydration bladder compatible • Heavy duty YKK® zippers, Duraflex ® 98

BACKPACKS & BAGS ►

hardware • Padded computer sleeve with separate access • Woven 550 cord carrying handle • Ventilated back panel - Combat Vent System® • Velcro® ID panel

LIFESTYLE PACK


GH0ST®

backpack MK II

product Id: BP-GHST-CD5

GHOST® MK II is a 30+ liter backpack, scalable and well suited for the role of tactical 3-day pack. It features main pack with two zippered compartments – first, larger, has an internal hydration sleeve and an accessory mesh pocket. Second, accessible from the back side of the pack is reinforced and will hold a large laptop computer. Third pocket of the GHOST® platform is a detachable organizer pocket, completely separable from the main pack body. Normally, it is attached to the main pack via 4 buckles and adjustable shockcord, but it may be used completely on its own (it has its own carrying handle) for medical supplies etc. Internally this outer pocket has a lot of internal slots and pockets for gear organization, plus when attached to the GHOST® main pack it forms a beavertail-type flap, where you can pack additional clothing or lighter gear. Externally, there are 4 pockets – two side pockets that may be stretched to fit water bottles. Additionally, there is a zippered, soft velour lined, glasses pocket in the upper portion of the pack and a flat zippered pocket below it. Carrying straps of the GHOST® backpack are wide, and padded with stiffened closed cell foam, with side release buckles for quick doffing. Waistbelt of the GHOST® pack is a fully functional PALS/MOLLE belt that can be detached from the main body and used on its own with included low-profile suspenders.

Weight: 2300 g / 5.07 lb Capacity: 28 + 3,5 l / 1708 + 213 cu in Dimension: 52 x 30 x 18 cm / 20,4 x 12 x 7 in

Specs:

• Cordura 500D laminate construction • Laser cut PALS/MOLLE on front and side, • Detachable organizer pocket – optionally standalone (as med kit e.g.) • Detachable PALS/MOLLE waistbelt with additional suspenders

BACKPACKS & BAGS ►

• Hydration bladder compatible • Heavy duty YKK® zippers, Duraflex® hardware • Padded computer sleeve with separate access • Ventilated back panel - Combat Vent System® • Velcro® ID panel

LIFESTYLE PACK

99


DUST®

backpack MK II

product Id: BP-DUST-CD5

DUST MK II® is a small 20+ liters backpack oriented towards use as an EDC/one day pack platform. It features two zippered compartments – main has an internal, padded laptop / hydration sleeve and an accessory mesh pocket. Smaller compartment has an internal organizer for notepads, GPS, writing utensils and other essentials, plus a clear vinyl pocket for maps and documents. Externally there are 3 flat pockets – two on the sides can be stretched to fit water bottles. Side accessible flat pocket on the front surface is a good place to keep smaller items that need to be easily accessible without opening packs compartments. Carrying straps and waistbelt of the DUST MK II® backpack are adjustable and can be stowed away in the back panel, turning this pack into a slim, no-snag hand luggage.

Weight: 1210 g / 2.667 lb Capacity: 20 l / 1220 cu in Dimension: 42 x 26 x 14 cm / 16.5 x 10 x 5.5 in

Specs:

• • • •

100

Cordura 500D laminate construction Laser cut PALS/MOLLE on front and sides Hydration bladder compatible Heavy duty YKK® zippers, Duraflex ® hardware

BACKPACKS & BAGS ►

• Padded computer sleeve • Woven 550 cord carrying handle • Ventilated back panel - Combat Vent System® • Velcro® ID panel

LIFESTYLE PACK


MESSENGER®

bag

product Id: BG-MSGM-CD5

MESSENGER BAG® designed not only for Military and Law Enforcement operators, but is also great for your everyday carry. If you’re looking for a heavy duty MOLLE messenger bag for your laptop, tablet, iPad, etc. or just a solid base for your bug out bag (BoB) – MESSENGER BAG® is the best choice for you. Large amount of pockets and additional compartments make the MESSENGER BAG® user friendly and easy for customization and personalization. Main compartment is lined with Velcro® loops which allow adding some extra equipment, like holsters or magazine pouches. Padded sleeve inside main compartment keeps your laptop, tablet or other electronic devices fully protected. Bag is secured with a large, velcro closed flap, alternatively fastened with buckles. On the inner side of the flap, there is a clear vinyl pocket and on the outside - a flat zippered compartment. The shoulder strap is fully adjustable, with additional comfort pad. Elastic cord on the bottom allows you to carry some clothing outside of the bag. The body side has a flat, zippered pocket where you can stow detachable waist strap if you decide to carry your bag without it. Made of durable 500D Cordura® nylon fabric with water resistant coating. MESSENGER BAG® features laser-cut modular system compatible with MOLLE/PALS. Laser cut MOLLE/PALS system makes the bag lighter then the bags made traditional way with webbing-based modular system. Weight: 1362 g / 2.94 lb Capacity: 10 l / 610 cu in Dimension: 35 x 26 x 13 cm / 13.7 x 10 x 5 in

Specs:

• Cordura® 500D fabric with water resistant coating for durablility • Lightweight, laser-cut MOLLE/PALS system • Velcro – fastened full flap with side release buckles for weather and elements protection • Main compartment lined with Velcro® loops for individual customization • Padded sleeve adapted for secured carrying 13’’ laptop or tablet • Large zipped pocket with transparent window for maps and documents on the reverse of the flap

BACKPACKS & BAGS ►

• Heavy duty YKK® zippers • Two external pockets with organizers under the flap • Two external side pockets • Zipped rear pocket • Adjustable shoulder strap with non-slip pad • Detachable waist strap which secure bag during motion (2,5 cm / 1 in wide) • Drag handle • Velcro ID panel (15,8 x 10,1 cm / 6.25 x 4 in) • All clips and buckles are made by Duraflex®/ WooJin

MESSENGER BAG

101


Our apparel section consists of every layer that is worn beneath your fighting equipment like uniforms, headgear, gloves, and other accessories, all made of the very best fabrics and materials, and carefully designed to meet the specific demands of the modern battlespace.

102


APPAREL UNIFORMS HEADWEAR HANDWEAR

103


VANGUARD ®

combat shirt

product Id: SH-VGCS-PDF

Your combat uniform is one of the most important layers you wear during any operation and it should protect you against abrasions but also provide proper freedom during dynamic movements. Our VANGUARD® combat shirt is designed to work with you and is made from top-quality fabrics; the torso is made of Polartec® PowerDry FR stretch fabric that is not only comfortable next to the skin, but also transfers moisture away from the body. The sleeves are made of NYCO fabric that is durable, yet breathable. Reinforcements on the elbows, that work as pockets for protective pads, are made of Cordura® 500D fabric. There are additional zippered pockets on the shoulders with soft loop panels for personalization. Specs:

Weight: 402 g / 0.89 lb – size M Sizes: S, M, L, XL, XXL

VANGUARD ®

• Made of Polartec® PowerDry FR and NYCO fabric • Zippered pockets on shoulders • Hook&loop closed cuffs

combat trousers

• Loop panels on shoulders for personalization • YKK® zippers • Cordura® 500D reinforcements on elbows • Pockets for protection inserts on elbows

product Id: TR-VGCT-NCR

Our VANGUARD® combat trousers were designed and made to provide as much freedom of movement as possible without compromising durability. Made from NYCO fabric with Cordura® 500D reinforcements on the knees, these pants will serve you well on any mission. Numerous pockets, including classic hip pockets, zippered front pockets and hook & loop closed pockets on the thighs will fit all your necessities. The hook & loop pockets can be used as improvised dump pouches. Hook & loop flaps on the leg cuffs and knees allow you to adjust the pants to your needs, and to provide even more freedom of movement, the pants feature numerous gussets made of 4-way elastic softshell fabric. Specs:

Weight: 602 g / 1.33 lb – size M Sizes: S, M, L, XL, XXL

104

• Made of NYCO fabric, YKK® zippers • 4 way elastic gussets to enhance freedom of movement • Cordura® 500D reinforcements on knees that work as additional pockets for knee pad inserts

APPAREL ►

UNIFORMS

• Classic hip pockets with reinforced edges • Zippered front pockets • Hook & loop closed pockets on tights; can be used as improvised dump pouch • Adjustment on knee area, Adjustment on leg cuffs, Hook & loop closed front, zippered fly


PROTECTIVE

pad inserts

product Id: PT-PPIN-NOP

DA Protective Pad Inserts are a simple solution to protect your knees and elbows when using our VANGUARD combat uniform when you don't want to use the external protectors. Made of neoprene, they are lightweight, yet thick enough to absorb minor bumps.

Specs:

Weight: 77 g / 0.16 lb Sizes: One size

• Made of 6 mm neoprene laminated on one side with durable fabric

FAST®

helmet cover MADE IN

POLAND

• Designed for VANGUARD® combat uniform • One size

product Id: HC-FAST-CD5

On the modern battlefield, the ballistic protection is just a must-have item no less important than camouflage. Therefore, we’ve decided to create an advanced helmet cover for one of the most popular models on the market – the OpsCore® FAST helmet. Made of Cordura® fabric, proprietary laminate and elastic softshell fabric, this cover will fit not only the ballistic helmets but also the bump version, without interfering with its ventilation holes. The loop panels on top and back are also MOLLE/PALS compatible so that you can mount a camera, IR strobes, counterweight etc. Side loop panels will allow for easy personalization with IR flags/IR markers. Front cut is made especially for NVG mounts. Specs:

Weight: 70 g / 0.15 lb – size M Sizes: M, L

• Made of Cordura® 500D, proprietary laminate and elastic nylon fabric • Fits OpsCore® FAST helmet type • Loop panels on top, back and sides APPAREL ►

UNIFORMS

• MOLLE/PALS compatible panels on top and back • Front cut for NVG mount plate

105


WINTER®

beanie

product Id: CP-WTBN-MWA

Our WINER BEANIE is a great combination of classic, useful headgear with some swag. Made of genuine Merino Wool, with an additional inner fleece, provide great thermo comfort even in very cold weather. To make it even more tacticool, the cap has a slightly visible “GO LOUD!” and DIRECT ACTION® logo knitted in its outer construction.

Specs:

Weight: 48 g / 0.11 lb Sizes: One-size-fits-all

• Made of Merino Wool/Acrylic • Classic beanie cap construction

BALACLAVA FR

flame retardant MADE IN

POLAND

Weight: 46 g / 0.10 lb Sizes: One-size-fits-all

106

• Knitted GO LOUD! and DIRECT ACTION® logo • Inner band made of fleece

product Id: CP-B1FR-CDR

This classic balaclava design will protect your good looks against flash fire and short flame exposure. Stretchy and comfortable it provides a snug fit with most helmet liner systems and works well with ballistic goggles and glasses.

Specs:

• Full face and neck protection, • Breathable & lightweight stretch fabric, APPAREL ►

HEADWEAR

• Flat seams, • One size fits most.


NECK GAITER FR MADE IN

POLAND

product Id: PT-PPIN-NOP

Simple, yet surprisingly useful, this neck gaiter works great in multitude of roles. It can be used to cover and protect your neck and face from flash fire, dust or wind – next minute you can turn it into cap, scarf, headband or goggle cover.

Specs:

Weight: 54 g / 0.12 lb Sizes: One-size-fits-all

• Breathable & lightweight stretch fabric • Flame Retardant (no melt, no drip)

BEANIE CAP FR

flame retardant MADE IN

POLAND

Weight: 26 g / 0.06 lb Sizes: One-size-fits-all

flame retardant

• Flat seams • One size fits most

product Id: CP-BNFR-CDR

Cap for under the helmet or standalone use. Also good for running or just chilling. Made of genuine Polartec® Flame Retardant fabric.

Specs:

• Breathable & lightweight stretch fabric • Flame Retardant (no melt, no drip) APPAREL ►

HEADWEAR

• Flat seams • One size fits most 107


HARD LEATHER

gloves®

product Id: GL-HARD-GLT

A new, improved version of the classic DIRECT ACTION® HARD GLOVES®, the synthetic leather has been replaced with genuine goat leather in order to provide greater durability, weapon interface, dexterity and fit. Specially designed slits on the finger joints provide comfort, even during prolonged weapon use, and all fingers are touch screen compatible. Hook & loop closed cuffs provide a secure, snug fit, and Hypalon® loops not only help with donning and doffing of the gloves, and can be used to hang the gloves on your equipment.

Specs:

Weight: 83 g / 0.17 lb Sizes: XS, S, M, L, XL, XXL

LIGHT LEATHER

• Genuine leather for great weapon interface • Highly breathable fabrics • Elastic fabric bonding to improve fitting and finger mobility • Fully compatible with touch screens

gloves®

• Functional Hypalon® loop for easier don and doff; can also be used for attaching the glove to your gear • Hook & loop closed cuff for better fitting • Slits on finger joints for extended mobility

product Id: GL-LGHT-GLT

An enhanced version of the classic DIRECT ACTION® LIGHT GLOVES®, this model is made with genuine goat leather instead of the artificial version. The gloves not only maintain a modern look, but also, thanks to the fabrics used, fit superbly. Genuine leather used on the inner side guarantees even higher durability and a reliable grip, and all fingers are touch screen compatible. An elasticated, extended cuff provides tight fitting and additional protection to your wrist, and Hypalon® loops not only help with donning and doffing, but can also be used to hang the gloves on your equipment.

Specs:

Weight: 82 g / 0.18 lb Sizes: XS, S, M, L, XL, XXL

108

• Genuine leather for enhanced weapon grip • Highly breathable fabrics • Elastic fabric bonding to improve fitting and finger mobility • All fingers compatible with touch screens

APPAREL ►

HANDWEAR

• Functional Hypalon® loop for easier don and doff; can also be used for attaching the glove to your gear • Extended cuff for additional protection


HARD

gloves®

product Id: GL-HARD-PES

DIRECT ACTION® HARD GLOVES® are perfect choice for everyone working with firearms. The gloves not only offer modern look, but also, thanks to used fabrics, provide great fitting to your hand. Synthetic leather used on the inner side guarantees high durability and reliable grip, thanks to its antislip properties. Specially designed slits on the finger joints provide comfort, even during prolonged weapon use. The middle finger and thumb are touch screen compatible. Velcro closed cuff provide reliable, tight fitting to your wrist, and Hypalon® loop not only helps with donning and doffing of the gloves, but also can be used to hang the gloves on your equipment. Specs:

Weight: 26 g / 0.06 lb Sizes: XS, S, M, L, XL, XXL

LIGHT

• Fabrics used on fingers offer great weapon feel • Highly breathable fabrics • Elastic fabric bonding to improve fitting and finger mobility

gloves®

• Compatible with touch screens • Functional Hypalon® loop for easier don and doff; can also be used for attaching the glove to your gear • Velcro closed cuff for better fitting

product Id: GL-LGHT-PES

DIRECT ACTION® LIGHT GLOVES® are perfect choice for everyone working with firearms. The gloves not only offer modern look, but also, thanks to used fabrics, provide great fitting to your hand. Synthetic leather used on the inner side guarantees high durability and reliable grip, thanks to its antislip properties. The middle finger and thumb are touch screen compatible. Elastic, extended cuff provide tight fitting and additional protection to your wrist, and Hypalon® loop not only helps with donning and doffing of the gloves, but also can be used to hang the gloves on your equipment.

Specs:

Weight: 65 g / 0.14 lb Sizes: XS, S, M, L, XL, XXL

• Fabrics used on fingers offer great weapon feel • Elastic fabric bonding to improve fitting and finger mobility • Highly breathable fabrics APPAREL ►

HANDWEAR

• Compatible with touch screens • Functional Hypalon® loop for easier don and doff; can also be used for attaching the glove to your gear

109


CROCODILE FR

gloves short®

product Id: GL-CRFS-NMX

Fire is one of the main dangers during dynamic operations, especially in CQB. DIRECT ACTION® NOMEX GLOVES are made entirely of flame retardant materials, like genuine DuPont Nomex®, and goat leather. Reinforcement in key areas will protect your hands from damage, while a carefully selected leather thickness retains your trigger feel. The Short version goes just over your wrist with a hook & loop adjustable cuff.

Specs:

Weight: 103 g / 0.23 lb Sizes: XS, S, M, L, XL, XXL

CROCODILE FR

• Made of DuPont Nomex® and goat leather • Leather thickness will not interfere your trigger feel

gloves long®

• Hook & loop closed cuff • Reinforcements in key areas

product Id: GL-CRFL-NMX

Breaching charges, pyrotechnics and exploding flashbangs all this produce flash and flame, so proper protection against these hazards can be crucial. Made from DuPont Nomex® and goat leather, and with reinforcement in key areas, these gloves will protect your hands from damage, while carefully selected leather thickness won't interfere with your trigger feel. The Long version goes over your wrist, with a partially elasticated cuff to protect even more skin area.

Specs:

Weight: 116 g / 0.26 lb Sizes: XS, S, M, L, XL, XXL

110

• Made of DuPont Nomex® and goat leather • Leather thickness will not interfere your trigger feel

APPAREL ►

HANDWEAR

• Long, elastic cuff • Reinforcements in key area


111


Even though we live in the era of firearms, drones, bombs and lasers, a good knife is still an essential part of war gear. To meet the requirements of a specialized clients we've developed our handcrafted knives not just as perfect hand-to-hand weapons, but also to be truly versatile tools. Available in different sizes to fit your needs.

112


KNIVES DUSK DAWN

113


DUSK ®

knife MADE IN

POLAND

product Id: KF-DUSK-D2S

DUSK® is a fairly large knife with a wide scope of application. It was first intended for forest or mountain environment, but has since proven itself in other tactical applications as well. The Full Tang blade, monolithic with the grip, makes it a very durable tool, indeed. It was made of D2 grade steel, combining edge-retaining qualities of carbon steel with corrosion-resistance of the stainless materials. The blade of low saber grind was finished by Stonewashing, which gave the blade matte surface, effectively killing light reflexes and unique appearance. The scales made of ‘Toxic’-patterned Micarta improves the grip traction.

Specs:

• Shape: Straight Back • Blade: 133 mm long, 4 mm thick, overall length 247 mm • Kydex® sheath included

Weight: 330 g / 0.73 lb Length: 133 mm – blade / 247 mm total

DAWN ®

knife MADE IN

POLAND

• Unique serial number • MOLLE/PALS • Skull crusher, Lanyard hole • Hand-made in Poland

product Id: KF-DAWN-D2S

DAWN® is a compact tactical knife, ideally suited for mounting on a plate carrier, chest rig or combat suspender. The design and materials are identical as in our larger-sized DUSK knife.

Specs:

Weight: 254 g / 0.56 lb Length: 85 mm – blade / 203 mm total

114

• Shape: Straight Back • Blade: 85 mm long, 4 mm thick, overall length 203 mm • Kydex® sheath included

KNIVES ►

• Unique serial number • MOLLE/PALS • Skull crusher, Lanyard hole • Hand-made in Poland


115


Looking cool on the job is as important as being a deadly killing machine, and thanks to our SWAG items you will look cool, no matter if you are hunting terrorists or going to the pub to grab a cold one!

116


SWAG CAPS T-SHIRTS NALGENE BOTTLES PVC PATCHES PVC FLAGS

117


FEED

cap®

product Id: CP-GLFC-CTN

When you need some more swag during hot days, there is no better choice then the classic trucker cap. And our FEED CAPS® are just the thing. Made of mixture of classic fabric with mesh, these caps are perfect to wear even during the hottest days. Large, curved visor will protect your eyes from the sun, and embroideries on foreheads will make you look tacticool.

Specs:

Weight: 68 g / 0.15 lb Sizes: One-size-fits-all

RETRO TRUCKER

• Made of combination of classic fabric and mesh • Classic, curved visor

cap®

• Embroidery on forehead • Adjustable size

product Id: CP-RTTC-PEB

Tactical life is not only about shooting and blowing things up, it’s also about swag, and there is no better swag than a classic ball cap! Our RETRO TRUCKER Cap is made of a combination of lightweight fabric with highly breathable mesh, to provide comfort even on the hottest days. A classic snapback makes it easy to adjust the cap to almost any head size, and a deep, curved visor will protect your eyes from the sun. Cool camouflage and a patch on the front will also add some tacticoolness to your look!

Specs:

Weight: 77 g / 0.17 lb Sizes: One-size-fits-all

118

• Made of combination of classic fabric and mesh • Classic, curved visor SWAG ►

CAPS

• Patch on the front • Snapback adjustment


DA T-SHIRT

pin-up girl #1

product Id: TS-DGLG-CTN

If you like guns, girls and tactical gear – this T-shirt is perfect for you. This 100% cotton tee was marked with one of our pin-up girl #1 inspired designs showing that a nice girl looks even nicer with our gear and an AR-15. WARNING – this t-shirt may not be safe to wear with some wives/ girlfriends in close proximity.

Weight: 168 g / 0.37 lb Sizes: S, M, L, XL, XXL, XXXL

Specs:

• 100 % Cotton

DA T-SHIRT

pin-up girl #2 MADE IN

POLAND

• Durable screenprint

product Id: TS-DGL2-CTN

One of our pin-up inspired tee's, perfect any true fan of girls and guns, especially AR15. This 100% cotton shirt has a large, durable print on front. WARNING – this t-shirt may not be safe to wear with some wives/ girlfriends in close proximity

Weight: 168 g / 0.37 lb Sizes: S, M, L, XL, XXL, XXXL

Specs:

• 100 % Cotton SWAG ►

T-SHIRTS

• Durable screenprint 119


DA T-SHIRT

Bad To The Bone MADE IN

POLAND

Weight: 168 g / 0.37 lb Sizes: S, M, L, XL, XXL, XXXL

If your everyday’s meal is made of concertina wire and you piss napalm – this tee is perfect for you. So wear it to make sure everybody knows that you are Bad to the Bone.

Specs:

• 100 % Cotton

DA T-SHIRT

logo MADE IN

POLAND

Weight: 168 g / 0.37 lb Sizes: S, M, L, XL, XXL, XXXL

• Durable screenprint

product Id: TS-LD1P-CTN

Show your support for DIRECT ACTION® Gear with one of our T-shirts. This 100% cotton shirt has our GO LOUD! motto printed on the front, and large DA® logo on back.

Specs:

• 100 % Cotton 120

product Id: TS-BTTB-CTN

SWAG ►

T-SHIRTS

• Durable screenprint


WIDE MOUTH

nalgene water bottle MADE IN

USA

product Id: DA-EQ-BE-WNB-TR

If you’re looking for a water bottle that will keep you well hydrated, hold up against bangs, bumps and drops and not leak, check out Nalgene’s most popular bottle customized with our DIRECT ACTION® logo.

Specs:

Weight: 178 g / 6.25 oz Volume: 1000 ml / 32 oz

DIRECT ACTION

• Made of BPA-free Eastman Tritan co-polyester • Dishwasher safe on the top rack • Superior impact resistance • Suitable for both warm and cold beverages • Loop-top design means you’ll never lose the lid

patch

• Wide mouth makes cleaning and adding ice cubes easy • Opening accommodates most water filters • Marked with millimeters and ounces • Branded with DIRECT ACTION® logo and GO LOUD! slogan • Made in USA, Available only in US Store

product Id: PA-DAGL-PVC

Show your support and attachment to Direct Action® gear with this PVC logo patch. Durable, backed with hooks, it will look great on your shirt, jacket, plate carrier or backpack. Available in various color options.

Weight: 9 g / 0.02 lb Sizes: W: 55 mm, H:47 mm

Specs:

• Made of high quality PVC • Backed with hook velcro SWAG ►

PVC PATCHES

• Available in full color or subdued

121


GO LOUD!

logo patch

product Id: PA-DAGL-PVC

Go loud! One of the most important command that can go through the radio when you need to “light them up”. It is also a Direct Action® motto, meaning, that in our gear you are ready for anything, even for the toughest firefight. So let everyone know, by wearing this PVC patch.

Weight: 6 g / 0.25 lb Sizes: W: 60 mm, H: 55 mm

POLISH BANNER

Specs:

• Made of high quality PVC • Backed with hook velcro

large patch

• Available in coyote brown

product Id: PA-PLBL-PVC

Show your Patriotism with one of our Polish Banner patch. This PVC, hook backed patch shows is made in either subdued or in full color, white&red version.

Weight: Size:

122

12 g / 0.42 oz W: 90 mm, H: 50 mm

Specs:

• Made of high quality PVC • Mil-Spec flag sizes SWAG ►

PVC FLAGS

• Backed with hook velcro • Available in full color or subdued


USA FLAG

large patch set

product Id: PA-USFL-PVC

Show your Patriotism with one of our US Flag Patch sets. Each set includes a forward and reverse facing US American Flag (for right and left arm display).

Weight: 20 g / 0.04 lb (set: 2 pcs) Size: 89 x 51 mm / 3.5 x 2 in

USA FLAG

Specs:

• Made of high quality PVC • Mil-Spec flag sizes

small patch set

• Backed with hook velcro • Available in full color or subdued

product Id: PA-USFS-PVC

Show your Patriotism with one of our US Flag Patch sets. Each set includes a forward and reverse facing US American Flag (for right and left arm display).

Weight: 18 g / 0.04 lb (set: 2 pcs) Size: 76 x 51 mm / 3 x 2 in

Specs:

• Made of high quality PVC • Mil-Spec flag sizing SWAG ►

PVC FLAGS

• Backed with hook velcro • Available in full color or subdued 123


Size chart and sizing guide.

SPITFIRE® plate carrier

HURRICANE® Chest Rig One size

Size: M Chest size up to 47"- 120 cm

Fits most

Fits SAPI/ESAPI Medium plates with backers or industrial standard: 10 x 12 inch multicurve plates.

TEMPEST® Chest Rig

Size: L Chest size up to 51”- 130 cm

TIGER MOTH® Chest Rig

One size

Fits most

One size

Fits SAPI/ESAPI Large plates with backers or similar ballistic inserts.

Fits most

TYPHOON® Chest Rig

Size: XL Chest size up to 55”-140 cm

One size

Fits SAPI/ESAPI Extra Large plates with backers or similar ballistic inserts.

Fits most

WARWICK® Chest Rig One size

Fits most

MUSTANG® Gun Belt Size: S Size: M Size: L Size: XL

80 - 90 cm 90 - 100 cm 100 - 110 cm 110 - 120 cm

MUSTANG® Inner Belt Size: S Size: M Size: L Size: XL

31"- 35" 36"- 39" 39"- 43" 43"- 47"

80 - 90 cm 90 - 100 cm 100 - 110 cm 110 - 120 cm

WARHAWK® Gun Belt - all types Size: S Size: M Size: L Size: XL

T-SHIRTS Size: EU S M L XL 2XL 3XL

31"- 35" 36"- 39" 39"- 43" 43"- 47"

80 - 90 cm 31"- 35" 90 - 100 cm 36"- 39" 39"- 43" 100 - 110 cm 43"- 47" 110 - 120 cm

MOSQUITO® Belt Sleeve

Size: US XS S M L XL 2XL

27" 31" 36" 39"

Size: S Size: M Size: L Size: XL

70 cm 80 cm 90 cm 100 cm

VANGUARD COMBAT TROUSERS® DIMENSIONS (cm)

S (30)

M (32)

L (34)

XL (36)

XXL (38)

XXXL (40)

1/2 Waist

41

44

47

50

53

56

1/2 Hips

52

55

58

61

64

67

107 / 112

107,5 / 112,5

108 / 113

108,5 / 113,5

109 / 114

109,5 / 114,5

81 / 86

81 / 86

81 / 86

81 / 86

81 / 86

81 / 86

21

21,5

22

22,5

23

23,5

Length incl. waist Regular (32) / Long (34) Inseam Regular (32) / Long (34) 1/2 Leg opening 124


Colors and camo swatches. LTC

AMG

AGR

Light Coyote FR

Army Green FR

Adaptive Green

CBR

BLK

RGR

Coyote Brown

CBA

Coyote Brown/ Adaptive Green

WDB

Woodland/ Black

MCM

MULTICAM®

Black

UGC

Urban Grey/ Coyote

UGR

Urban Grey

FDE

Ranger Green

KYDEX® Flat Dark Earth

UGS

BLU

SGR

Shadow Grey

BLK

KYDEX® Black

OGR

Olive Green

AGC

Adaptive Green/ Coyote Brown

RED

BRW

Urban Grey/ Shadow Grey

Blue/Orange

Red/Black

Brown

Slate blue/ Black

Gray/ Black

Cadet/ Spring Green

Cadet/ Black

WDL

Woodland

PGZ

PBL

PENCOTT® GREENZONE™

PENCOTT BADLANDS™

®

PSD

®

PENCOTT SNOWDRIFT™

PSS

®

PENCOTT SANDSTORM™

PWW

®

PENCOTT WILDWOOD™ 125


Europe: DIRECT ACTION s.c. ul. Legnicka 57w/3 54-201 Wrocław POLAND online.eu@directactiongear.com North America: DIRECT ACTION LLC 9 Stonebreak, Ste 1 - Malta, NY 12020 U.S.A. online.us@directactiongear.com

5

908218

775916

id: AD-PE20-PPR-000 | ver: 2020-01-17_E

PLEASE RECYCLE

Profile for Helikon-Tex

Direct Action® Product Line 2020 (EN)  

DIRECT ACTION® from the outset was initiated as a project combining great design and technical capability, the experience of the design team...

Direct Action® Product Line 2020 (EN)  

DIRECT ACTION® from the outset was initiated as a project combining great design and technical capability, the experience of the design team...