How To Make Metal Pistol Targets Employing metal concentrates on for rehearsing with your pistol can provide you with a regular target, which, unlike papers targets, doesn't need to be altered between training rounds. Aluminum targets usually provide you with a sign that you have strike your objective. When using aluminum targets there's always a danger of ricochet, so setup your objective taking this chance into consideration. Create your objective in a place surrounded by a sufficient back drop to stop the bullet soon after it has success the target. Directions Push your two garden stakes straight into the soil about 2 ft. apart utilizing the mallet. Your garden stakes are equipped for installing chicken breast wire and must have hooks and holes along their length; it's these holes that you will be using to set up your target. Drill holes into the top two corners of your metal target using a 1/8-inch drill bit; the holes -- one in each corner -- should be about 1/4 inch in from the top and side of the metal pistol targets. By placing the hook through the hole on top of the stake, attach one end of a bungee cord to the top of a garden stake. Put the hook on the other end of the bungee cord through a hole in the corner of your target. Repeat the procedure for the other side of the target. Your target should now be hanging suspended between the stakes.