Pocket EC & TDS
Pocket testers PRIMO Series
Great everyday testers for TDS and conductivity Primo
The pocket sized Primo testers provide a fast and dependable way to measure the total dissolved solids (TDS) or conductivity in water samples.
The Primo pocket TDS tester has a measurement range of 0 to 1999ppm (mg/L)
They are ideally suited to the rigorous demands of water quality professionals who will appreciate the practicality of the clear, easy to read LCD for demonstrating the before and after results of conditioning and filtration systems.
Primo series
Laboratory
Pocket Thermometers Laboratory Checktemp Range
TDS • conductivity • TDS
Supplied with
• Robust pocket-sized testers
• Batteries
• Instructions
Calibration solutions
• Choose from TDS or EC
Primo: HI 70032P
Primo 5: HI 70031P
See page 63 for details.
• Direct probe connection
Specifications
• Automatic calibration
Product Code
PRIMO
PRIMO5
0 to 1999 ppm (mg/L)
0 to 1999 µS/cm
Resolution
1 ppm (mg/L)
1 µS/cm
Accuracy
±2% F.S.
±2% F.S.
HI-70032P
HI-70031P
automatic, at 1382 ppm
automatic, at 1413 µS/cm
Range
• Automatic Temperature Compensation
Calibration Solution Calibration Temperature Compensation
Automatic, 0 to 60°C , ß=2%/°C
Battery Type Battery Life Environment
2 x 1.5V approx. 200 hours; auto-off after 5 minutes of non-use 0 to 50°C ; RH max 95%
Dimensions
Primo 5 Primo 5 conductivity tester has a measurement range of 0 to 1999uS/cm and 1us/cm resolution
180 x 50 x 25 mm
Weight
50 g
Operation and maintenance are straightforward Operate
Calibrate
1. Primo and Primo 5 use a single
1. Simply press and hold the button for a few
button at the top of the meter.
conductivity 16
meter is powered and ready for use.
2. Open a sachet of Hanna calibration solution and dip the probe directly into the sachet.
3. Within seconds the meter recognises the
calibration solution and will calibrate itself.
Temperature is compensated automatically to ensure the readings are consistent with standard or reference temperature.
www.hannanorden.com
info@hannanorden.com
+46 300 404018
www.hannanorden.com
info@hannanorden.com
+46 300 404018
conductivity
2. Press the button once and the
seconds and the meter automatically enters calibration mode.
17