Issuu on Google+

FINGER JOINT PINE

Finger Joint Pine

 For the Love of Painted Wood, FJ Pine is the Economical Choice 


:: FINGER JOINT PINE STANDARD MOULDINGS

Finger Joint Pine F

inger-Joint (FJ) Pine consists of small pieces of wood that are recycled and jointed together to create lengths for door casings and 16’ or 17’ lengths for crowns, base and chair rails. This allows for ease of installation and less installation joints, typical of solid woods.

T

he advantages to FJ Pine mouldings are the definition of detail, much sharper than MDF, the workability, nailing ease and personal preference for wood.

F

J Pine can have some imperfections. Due to FJ production including many different species of pine from around the globe, this product can have raised grain, thus lacking the smoothness of other species. Close inspection prior to installation and painting is key.

A

ll FJ & Primed FJ mouldings have trimbacks. Trimbacks occur during manufacturing. The moulding comes through the molder at the correct length ordered, but a defect is spotted. Rather than throw the whole piece of moulding away, the defect is cut out, leaving varied lengths. Trimbacks (lengths other than those ordered) should not exceed 10% of the footage ordered.

SECTION CONTENTS Apron ........................................86 Astragal ....................................85 Base and Shoe ..........................72 Casing ......................................67 Chair Rail ..................................84 Cleat ........................................85 Cove ........................................84 Crown ......................................79 Exterior Mold..............................86

Points of Distinction

Full Round ..................................84 Hook ........................................85 Quarter Round............................84 Panel ........................................84 S4S ..........................................86 Stool..........................................86 Stop ..........................................79 T&G Wainscot ............................85

Long Lengths Standard with Trimbacks

All Styles In-stock

Cost Effective


––  1-1/2

TO

CASING

2-1/2  ––

Lengths Available in Casing Widths (3” or under): 7’, 14’, 17’

1/2 x 1-5/8 Flat S/L Casing

102A

103A

11/16 x 2-1/4 Flat S/L Casing

107A

:: FINGER JOINT PINE

101A

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

5/8 x 1-5/8 Flat S/L Casing

5/8 x 1-5/8 711 Casing

67 108A

5/8 x 2-1/2 711 Casing

121A

11/16 x 2 Clamshell Casing

151A

9/16 x 1-1/2 Pre-Fit Casing

152A

11/16 x 2-1/4 #356 Casing

153A

9/16 x 2 #356 Casing

162A

11/16 x 2-1/4 #366 Casing

elandelwoodproducts.com


:: FINGER JOINT PINE

CASING

––  2-1/2”  ––

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

STANDARD MOULDINGS

Lengths Available in Casing Widths (3” or under): 7’, 14’, 17’

110A

150A

5/8 x 2-1/2 3 Step Casing 115A

5/8 x 2-1/2 Universal Casing

157A

1-1/4 x 2-1/2 Coronado Casing

5/8 x 2-1/2 Cape Cod Casing

68

159A

163A

1 x 2-1/2 Hermosa Casing 162B

11/16 x 2-1/2 #366 Casing

164A

1-1/4 x 2-1/2 Bell Court Casing

5/8 x 2-1/2 Monterey Casing

elandelwoodproducts.com


TO 3  –– Lengths Available in Casing Widths (3” or under): 7’, 14’, 17’

CASING

:: FINGER JOINT PINE

119A

––  2-1/2

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

11/16 x 2-7/8 Colonial Casing

128A

11/16 x 2-7/8 Bel-Air Casing

69 167A

1-3/16 x 2-7/8 Palos Verdes Casing

165A

169A

5/8 x 3 #275 Casing

11/16 x 2-1/2 Tudor Casing

elandelwoodproducts.com


:: FINGER JOINT PINE

CASING

––  3-1/4

STANDARD MOULDINGS

117A

TO

3-1/2  ––

9/16 x 3-1/2 Colonial Casing

126A 11/16 x 3-1/4 Crescent Casing Lengths Available: 17’ + Trimbacks

154A 1/2 x 3-1/4 3 Fluted Casing Lengths Available: 14’ and 16’ + Trimbacks

70 158A 1/2 x 3-1/2 5 Fluted Casing Lengths Available: 14’ and 16’ + Trimbacks

161A 11/16 x 3-1/4 Cambridge Casing Lengths Available: 17’ + Trimbacks

170A 1 x 3-1/4 Tudor Casing Lengths Available: 17’ + Trimbacks

elandelwoodproducts.com

MUL = Ultralite MDF MBB = Standard to Lightweight MDF


––  3-1/4

155A

5-1/2  ––

CASING

9/16 x 4-1/4 Colonial Casing

:: FINGER JOINT PINE

118A

TO

11/16 x 3-1/2 Cape Cod Casing Available in 17’ only + Trimbacks

156A

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

11/16 x 3-1/2 Chesapeake Casing Available in 17’ only + Trimbacks

71

160A

1-1/4 x 3-1/4 Hermosa Casing Available in 17’ only + Trimbacks

166A

172A

1 x 3-1/2 Crescent Casing Available in 17’ only + Trimbacks

1/2 x 5-1/2 4 Flute Casing Available in 7’ and 16’ + Trimbacks

elandelwoodproducts.com


STANDARD MOULDINGS

:: FINGER JOINT PINE

BASE

300A 300S

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

––  3/4

TO 2-1/2  –– Lengths Available: 16’ + Trimbacks

3/8 x 3/4 Shoe 3/8 x 3/4 Solid Blue Stain Shoe (subject to availability)

304A

301A

3/8 x 2-1/4 S/L Base

7/16 x 1-1/2 Flat Base

305A

72

310A

7/16 x 2-1/2 S/L Base

7/16 x 2-1/2 711 Base

310B

5/8 x 2-1/2 711 Base 312A

7/16 x 2-1/2 3 Step Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


BASE

––  2-1/2

TO 3-1/2  –– Lengths Available: 16’ + Trimbacks

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

:: FINGER JOINT PINE

319A

314A

1/2 x 2-1/2 #356 Base

9/16 x 3-1/4 #623 Base

320A

1/2 x 3-1/4 #356 Base

73

324A 322A

1/2 x 3-1/2 3 Step Base

9/16 x 3-3/8 Hermosa Base 327A

1 x 3-1/2 Palos Verdes Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


––  3-7/16

TO 4-1/4 Lengths Available: 16’ + Trimbacks

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

 ––

STANDARD MOULDINGS

:: FINGER JOINT PINE

BASE

117A

9/16 x 3-1/2 Colonial Base 307A

7/16 x 3-1/2 Streamline Base

74

316A

311A

7/16 x 3-1/2 711 Base

7/16 x 4-1/4 Monterey Base

339A

9/16 x 3-7/16 Crescent Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


BASE

––  4

TO 4-1/2  –– Lengths Available: 16’ + Trimbacks

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

:: FINGER JOINT PINE 75

321A

318A

9/16 x 4 Cape Cod Base

1/2 x 4-1/2 3 Step Base

325A

9/16 x 4-1/4 #175 Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


––  4-1/4

TO 5-1/4  –– Lengths Available: 16’ + Trimbacks

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

STANDARD MOULDINGS

:: FINGER JOINT PINE

BASE

76

118A

9/16 x 4-1/4 Colonial Base

326A

315A

11/16 x 4-1/4 Crescent Base

9/16 x 5-1/4 #618 Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


BASE

––  5

TO 5-1/4  –– Lengths Available: 16’ + Trimbacks

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

:: FINGER JOINT PINE 77

318B

317A

9/16 x 5-1/4 Crescent Base

9/16 x 5-1/4 “B” Cape Cod Base

323A

9/16 x 5 Hermosa Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


––  5-1/4”  ––

:: FINGER JOINT PINE

BASE

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

STANDARD MOULDINGS

Lengths Available: 16’ + Trimbacks

78

328A

9/16 x 5-1/4 Colonial Base

365A

338A

5/8 x 5-1/4 Lancaster Base

9/16 x 5-1/4 #175 Base

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


Lengths Available: 3’, 7’, 14’, 16’ + Trimbacks

3/8 x 1-1/4 2RE Stop

202A

1/2 x 1-1/4 1RE Stop

209A

1/2 x 1-1/2 1 RE Stop

210A

1/2 x 1-3/4 Ogee Stop

211A

1/2 x 1-1/2 Vinyl Stop

––  2-1/4

TO 3-3/8  –– Lengths Available: 16’ + Trimbacks

:: FINGER JOINT PINE

206A

STANDARD MOULDINGS

STOP

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

CROWN & CORNICE Lengths Available: 16’ + Trimbacks

1-3/4

1-3/8

79

401A

9/16 x 2-1/4 Colonial Crown

2-11/16

1-7/8

1-3/4

1-3/4

402A

11/16 x 2-1/2 Cornice

405A

9/16 x 3-3/8 Colonial Crown

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


:: FINGER JOINT PINE

CROWN & CORNICE

––  3-1/4

TO 4-1/2  –– Lengths Available: 16’ + Trimbacks

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

3-3/8

2-3/4

2-5/8

STANDARD MOULDINGS

2-3/8

406A

9/16 x 4-3/8 Colonial Crown

411A

1-1/4 x 3-9/16 Cornice

2-7/8

3

80

2-5/8

1-7/8

412A

11/16 x 4-1/4 Georgian Crown 413A

11/16 x 3-1/4 Bed Mold

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


––  4-5/8

TO

5-7/8  ––

CROWN & CORNICE

Lengths Available: 16’ + Trimbacks 3-3/8

3-1/4

409A FJ CORNICE

:: FINGER JOINT PINE

4-1/8

4-1/4

11/16 x 4-5/8 Cornice 3-3/4

3-11/16

409A

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

81 408A

1-1/4 x 5-7/8 Cornice

414A

9/16 x 5-1/4 Colonial Crown

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


:: FINGER JOINT PINE

CROWN & CORNICE

––  3-3/4

TO

5-1/2  ––

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

Lengths Available: 16’ + Trimbacks

STANDARD MOULDINGS

4-3/8

3-5/16

82 CM73A 3/4 x 5-1/2 Dentil Crown

4-3/8

3-5/16

CM74A 3/4 x 3-3/4 Dentil Crown *Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


Lengths Available: 16’ + Trimbacks

CROWN & CORNICE

3-1/2

4-1/2

STANDARD MOULDINGS

––  6”  ––

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

:: FINGER JOINT PINE 83 410A

11/16 x 6 Crown

Crown can be installed with the detail going up or down, as the option shown here. It’s generally a matter of personal preference.

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


:: FINGER JOINT PINE

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

STANDARD MOULDINGS

CHAIR RAIL

651A

9/16 x 2-1/2 Chair Rail 653A

649A

11/16 x 3 Colonial Chair Rail

11/16 x 3 Bead & Belly Chair Rail

PANEL Lengths Available: 16’ and Trimbacks

84

605A

11/16 x 1-5/8

Panel Mold 620A

COVE & QUARTER ROUND

3/4 x 1-1/2 Rabt Panel Cap with 3/8” Rabt

FULL ROUND

504A

11/16 x 11/16 Quarter Round Lengths Available: 16’ and Trimbacks 523A

11/16 x 11/16 Cove Lengths Available: 14’ and 16’

802A

1-1/4 Full Round

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


T&G WAINSCOT Lengths Available: 16’ and Trimbacks

2000 M

2001A 3/8 x 3-3/8 Flat T&G Wainscot

ASTRAGAL

:: FINGER JOINT PINE

2000A 3/8 x 3-3/8 Beaded T&G Wainscot

STANDARD MOULDINGS

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

660A 11/16 x 1-5/8 Flat Astragal Lengths Available: 7’, 8’ 16’

85 661A

1-1/4 x 2-1/4 T-Astragal for 1-3/4 Doors Lengths Available: 7’ and 8’

HOOK & CLEAT Lengths Available: 16’ and Trimbacks

10FJ

11/16 x 1-1/2 Cleat MH

9/16 x 3-1/4 1EE Milled Hook

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


:: FINGER JOINT PINE

MUL = Ultralite MDF MBB = Standard to Lightweight MDF

EXTERIOR MOLD

STANDARD MOULDINGS

Lengths Available: 7’, 14’, 17’

953A 3/4 x 1-3/16 Stucco Unprimed PR953A Primed Stucco

953B

7/8 x 1-1/4 Flat Stucco Perfect for nailing 1x trim around a door or window

612A 1-1/4 x 2 #180 Eastern Brick Unprimed PR612A Primed 180 Eastern Brick

612B 1-1/4 x 2 #180 Eastern Brick w/Key Unprimed PR612B Primed 180 Eastern Brick w/Key

STOOL & APRON Lengths Available: 16’ + Trimbacks

86

979A 980A 985A

11/16 x 5-1/2 11/16 x 4-3/4 11/16 x 7-1/4

Flat Stool Flat Stool Flat Stool

S4S Lengths Available: 16’

902A

3/8 x 1-1/2 Apron Other options for Apron are casing or base underneath a window stool.

715A 750A 751A 753A

11/16 11/16 11/16 11/16

x x x x

3-1/2 5-1/2 7-1/4 11-1/4

S4S S4S S4S S4S

(1 (1 (1 (1

x x x x

4) 6) 8) 12)

*Trimbacks are lengths other than standard. When a defect occurs during milling, the defect is removed leaving a length other than ordered. Trimbacks are considered any length 6’ thru 15’ and may represent up to 15% of a tally with 85% in the stocked length requested.

elandelwoodproducts.com


Finger Joint Mouldings