08 Clean Gas Products

HALE HAMILTON

®

Clean Gas Products

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

Clean Gas Products HP - High Purity & UHP - Ultra High Purity HP50, HP/UHP100T, HP/UHP1100, HP/UHP1400, Regulators HP/UHP1550, UHP1600 & HP/UHP1700 CFPR & CFPM High Flow Regulators HP/UHP3600 Diaphragm Stop Valves HP2000 Series Sealed Spindle Stop Valves CFASV Bellows Stop Valves HP/UHP10 Non-return Valves CFRVS & CFLRV Relief Valves UHP30 Vacuum Generator Panels

We design, machine, build and test all our products on one site in Uxbridge. If you don’t see what you want in our standard ranges, contact us and we’ll do our best to meet your needs.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise “dead” areas where contaminants might collect.

Elastomers are not used and polymers are carefully selected for suitability.

UHP uses the same design as HP but the parts are machined to a better surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

HP/UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of spring-loaded regulators that provide a flow of gas at controlled pressure. The outlet pressure is set by turning the control knob. The process fluid is isolated from the spring compartment by a metal diaphragm. The range of outlet pressure is set by the diameter of the diaphragm and the strength of the spring.

The outlet pressure is substantially unaffected by flow rate but it does drop slightly as the inlet pressure is increased.

A back pressure variant is available. This controls the inlet pressure by venting pressure to the outlet if the inlet pressure exceeds the set value.

Standard Types

Build Standards (UHP only)

• •

•

• • • • •

HP50 – back pressure regulator HP/UHP100T – forward pressure regulator with tied diaphragm for low pressure HP/UHP1100 – high flow forward pressure regulator HP/UHP1400 - forward pressure regulator for low absolute pressure HP/UHP1550 - low flow forward pressure regulator UHP1600 – forward pressure regulator with no valve lift spring HP/UHP1700 – two stage forward pressure regulator

• • • •

•

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Leak rate is less than 10-9 mbar l/s of Helium, inboard, outboard and across seat.

No lubrication is used in the flow path and the seat materials are chosen for minimal gas absorption.

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Standard Specification • •

Ports: 1/4” NPT female for HP, 1/4” Cajon VCR fittings on welded stubs for UHP (except where stated otherwise) Temperature range: -40 to +100°C

Options • • • • • • •

See next page for specification of individual types

• • • •

Ports: alternative port configurations can be supplied including additional ports for gauges and relief valves.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Mounting: all types have threaded mounting holes in the base but an optional threaded bonnet is available for panel mounting.

The standard control knob may be replaced by a lever or by a locking cap.

A maximum outlet pressure limit stop is fitted as standard but a minimum outlet pressure limit stop is available as an option Steam heated and explosion proof electrically heated variants are available.

Certification: variants are available approved for use with Oxygen, for medical Oxygen service or for ATEX service. Some variants have passed adiabatic shock (BAM) tests.

Panel Mounting and Locked Output Pressure

• • • • • • • • • • • •

Alternative materials can be supplied

Body: Stainless Steel or Brass Valve: Stainless Steel, Monel or Hastelloy Valve Seat: PCTFE Diaphragm: Stainless Steel (PTFE coating optional) or Hastelloy

Ordering Information

Please contact us for details

Locked Outlet Cap (Option)

Standard Materials

Please supply the following information when ordering

Cleanliness level Inlet Pressure Outlet pressure range Forward or back pressure Flow medium Tied diaphragm (where available) Control knob or locked output (state required outlet pressure) Panel mounting required Internal limit stops – state maximum pressure Port configuration Operating and storage temperature ranges Certification and QA requirements

Lever Control and Outlet Limit Stops

Panel Mounting (Option)

Operating Lever (Option) Maximum Limit Stop (Standard) Minimum Limit Stop (Option)

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP50 Back Pressure Regulator

HP/UHP Spring-Loaded Regulator Typical Dimensions Ø54

Specification

Ø32 13 (200)

123

Inlet Pressure bar (psi)

•

Maximum inlet pressure: 17bar (250psi) Outlet pressure ranges: 0 to 2 bar (0 to 30psi), 0 to 7 bar (0 to 100psi), 0 to 17 bar (0 to 250psi) Flow factor (Cv): 0.12

HP50

11 (160)

Increasing Flow

8.2 (120)

Decreasing Flow

5.5 (80)

0

2

4

6

8

17

• •

in mm except where shown otherwise

10

Flow l/min

Ø45

HP/UHP100T

Typical Dimensions

in mm except where shown otherwise

Specification • • •

Maximum inlet pressure: 207bar (3000psi) Outlet pressure ranges: 0 to 1.7 bar (0 to 25psi), 0 to 3.4 bar (0 to 50psi), 0 to 7 bar (0 to 100psi), 0 to 10 bar (0 to 150psi) Flow factor (Cv): 0.16 Inlet Pressure 2000psi 1000psi 500psi 200psi

136

HP100T

Ø70

6.9 (100)

5.5 (80)

18

Outlet Pressure bar (psi)

6.2 (90)

3.5 (50)

Ø51

2.7 (40) 2.0 (30) 1.4 (20) 0.7 (10) 0

40

80

120 160 Flow l/min

200

240

280

320

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

HP/UHP Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP/UHP1100 High Flow

Typical Dimensions

in mm except where shown otherwise

Specification

• • • •

Maximum inlet pressure: 310bar (4500psi) Outlet pressure ranges: 0 to 0.7 bar (0 to 10psi), 0 to 1.7 bar (0 to 25psi), 0 to 3.4 bar (0 to 50psi), 0 to 7 bar (0 to 100psi), 0 to 14 bar (0 to 200psi), 0 to 20 bar (0 to 290psi) Flow factor (Cv): 0.2 Process Ports: 3/8” NPT female for HP, 1/2” Cajon VCR fittings on welded stubs for UHP Pressure Variation** %: 0.6 Tied diaphragm option available HP1100

Ø66

Ø42 186

• •

Inlet Pressure 500psi 300psi 200psi

26

6.9 (100)

Outlet Pressure bar (psi)

6.2 (90)

Ø56

5.5 (80) 3.5 (50) 2.7 (40) 2.0 (30) 1.4 (20) 0.7 (10) 0

40

80

120 160 Flow l/min

200

240

280

320

** Pressure variation is the RISE in outlet pressure for a DROP in inlet pressure

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP/UHP1400 Absolute Pressure

HP/UHP Spring-Loaded Regulator Typical Dimensions

in mm except where shown otherwise

Specification Ø54

Ø32

Inlet Pressure

127

This regulator is for use at vacuum and low positive pressure. It includes an internal spring to compensate for ambient pressure.

• Maximum inlet pressure: 10barg (150psig) • Outlet pressure range: 0.07 to 2.1 bar (1 to 30psi) absolute • Flow factor (Cv): 0.3 120psi 70psi 25psi

HP1400

19

Outlet Pressure bar (psi)

1.1 (16) 0.96 (14)

Ø58

0.83 (12) 0.69 (10) 0.55 (8) 0.41 (6) 0.27 (4) 0.14 (2) 0

14

28

42

56

71

85

100 114 128 156

Flow l/min

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP/UHP1550 Low Flow

HP/UHP Spring-Loaded Regulator Typical Dimensions

in mm except where shown otherwise

Specification • • • • •

Maximum inlet pressure: 376bar (5450psi) Outlet pressure ranges: 0 to 2 bar (0 to 30psi), 0 to 5 bar (0 to 75psi), 0 to 7 bar (0 to 100psi), 0 to 10 bar (0 to 150psi), 0 to 20 bar (0 to 290psi) Flow factor (Cv): 0.09 Pressure Variation** %: 0.8 Tied diaphragm option available

Ø54

Inlet Pressure

130

250 bar 100 bar 40 bar

HP1550

10 (145)

8 (116)

17

Outlet Pressure bar (psi)

9 (131)

7 (101) 6 (87)

Ø48

5 (72.5) 4 (58) 3 (43.5) 2 (29) 1 (14.5) 0

100

200

300

400

500

600

Flow l/min

** Pressure variation is the RISE in outlet pressure for a DROP in inlet pressure

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

HP/UHP Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

UHP1600 “Springless”

Typical Dimensions

in mm except where shown otherwise

Specification Ø54

120

This regulator has no spring in the process flow to eliminate the possibility of contamination from the spring. The diaphragm acts as the valve lifting spring.

Because of this the diaphragm is tied to the valve mechanism.

This type is only offered as ultra high purity.

• Maximum inlet pressure: 218bar (3161psi) • Outlet pressure ranges: 0 to 2 bar (0 to 30psi), 0 to 7 bar (0 to 100psi), 0 to 17 bar (0 to 250psi) • Flow factor (Cv): 0.09 Inlet Pressure

17

2000psi 1000psi 500psi

HP1600

13.8 (200)

Ø46

12.4 (180)

Outlet Pressure bar (psi)

11.0 (160) 9.6 (140) 8.3 (120) 6.9 (100) 5.5 (80) 4.1 (60) 2.7 (40) 1.4 (20) 0

40

80

120 160 Flow l/min

200

240

280

320

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP/UHP1700 Two Stage

HP/UHP Spring-Loaded Regulator Typical Dimensions

in mm except where shown otherwise

Specification Ø54

Ø32

160

This regulator incorporates two stages of regulation in a common body. This significantly reduces the effect of changes in inlet pressure on the outlet pressure. It also reduces the cooling effect of large pressure drops.

• Maximum inlet pressure: 376bar (5450psi) • Outlet pressure ranges: 0 to 2 bar (0 to 30psi), 0 to 5 bar (0 to 75psi), 0 to 10 bar (0 to 150psi) • Flow factor (Cv): 0.065 • Pressure Variation** %: 0.0064 • Tied diaphragm option available Inlet Pressure

HP1700

350 to 3000

Ø45

6.9 (100)

5.5 (80)

58

Outlet Pressure bar (psi)

6.2 (90)

4.8 (70)

Ø32

4.1 (60) 3.5 (50) 2.7 (40) 2 (30) 1.4 (20) 0.7 (10) 0

20

40

60

80

100

120

Flow l/min

** Pressure variation is the RISE in outlet pressure for a DROP in inlet pressure

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

UHP High Flow

®

Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description UHP (Ultra High Purity) products are for service where the product must be kept free of contamination.

Elastomers and polymers are carefully selected for suitability. Parts are machined to a high surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of spring-loaded regulators that provide a flow of gas at controlled pressure. The outlet pressure is set by turning the control knob. The process fluid is isolated from the spring compartment by a piston. The range of outlet pressure is set by the diameter of the piston and the strength of the spring.

The outlet pressure is substantially unaffected by flow rate but it does drop slightly as the inlet pressure is increased.

A back pressure variant is available. This controls the inlet pressure by venting pressure to the outlet if the inlet pressure exceeds the set value.

Options • • • •

Ports: alternative port configurations can be supplied including additional ports for gauges and relief valves.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

The standard control knob may be replaced by a locking cap.

Certification: variants are available approved for use with Oxygen or for ATEX service.

Standard Specification • • •

Please contact us for details

See next page for specification of individual types

Process Ports: 1/2” Cajon VCR fittings on welded stubs Gauge Ports: 1/4” Cajon VCR compatible female Temperature range: -10 to +100°C

Build Standards • • •

•

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Standard Materials • • • •

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Alternative materials can be supplied

Body: Stainless Steel Valve: Stainless Steel Valve Seat: PCTFE O rings: Viton

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

UHP High Flow

®

Spring-Loaded Regulator

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Please supply the following information when ordering

Ordering Information • • • • • • •

Inlet Pressure Outlet pressure range Forward or back pressure Flow medium Control knob or locked output (state required outlet pressure) Port configuration Operating and storage temperature ranges

•

Certification and QA requirements

CFPR1 Forward Pressure CFPM1 & 2 Back Pressure

Locked Output Pressure Locked Outlet Cap (Option)

Typical Dimensions

in mm except where shown otherwise

Specification CFPR1

CFPM1

CFPM2

Max. inlet pressure

320bar (4640psi)

320bar (4640psi)

25bar (360psi)

Outlet pressure ranges bar

0 to 25 0 to 100 70 to 280

0 to 10 0 to 100 100 to 250

0.5 to 2.5

Outlet pressure ranges psi

0 to 360 0 to 1450 1015 to 4060

0 to 145 0 to 1450 1450 to 3625

7 to 36

Weight: 5.5kg

231

•

Ø83

CFPR1 248 (3600)

193 (2800) 166 (2400) 138 (2000)

65

Outlet Pressure bar(psi)

221 (3200)

110 (1600) 83 (1200)

Ø95

55 (800) 28 (400) 0

5.6 (5600)

11.3 17.0 22.7 28.3 (11300) (17000) (22700) (28300) Flow nM3(l)/min

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Diaphragm Stop Valves

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise “dead” areas where contaminants might collect. Elastomers and polymers are carefully selected for suitability.

UHP uses a similar design to HP but the parts are machined to a better surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

HP/UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of stop valves in which a non-tied diaphragm isolates the operating mechanism from the process fluids.

The HP/UHP 3600 series is operated by a quarter turn lever or a pneumatic actuator which may be normally closed or normally open.

Construction

Build Standards (UHP only)

•

•

• •

The diaphragm is of one-piece non-welded construction for greater integrity and improved fatigue life. It acts directly on the seat to close the valve to minimise dead space and wetted area.

The valve seat is mechanically supported and retained to minimise deformation under load and seat lift under reverse flow conditions.

To prevent the shedding of particulate contamination, there are no sliding, rotating or rubbing components in the flow path.

• • • •

•

Standard Materials

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Leak rate is less than 10-9 mbar l/s of Helium, inboard, outboard and across seat.

No lubrication is used in the flow path and the seat materials are chosen for minimal gas absorption.

Alternative materials can be supplied

• Body: Stainless Steel, Monel or Brass • Valve: Stainless Steel or Brass

• Seat: PCTFE • Diaphragm: Hastelloy

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Diaphragm Stop Valves

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Options • • •

Please contact us for details

Ports: alternative port configurations can be supplied.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Certification: variants are available approved for use with Oxygen, for medical Oxygen service or for ATEX service.

HP/UHP 3600 series

Please supply the following information when ordering

Ordering Information • • • • • • • •

Cleanliness level Valve size Actuator required: normally open or normally closed Maximum working pressure Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements in mm except where shown otherwise

Typical Dimensions

Specification

28

Fixed male VCR

11

• •

Nominal Bore: 5mm Maximum working pressure: 241bar (3500psi) Flow factor (Cv): 0.2 Ports: 1/4” NPT female for HP, 1/4” Cajon VCR compatible male or female, fixed or swivel, or 1/4” stub tube for welding for UHP (alternative ports can be supplied) Weight: 0.35kg Temperature range: -40 to +100°C (extended temperature range versions can be supplied)

55

• • • •

28 59

Fixed female VCR

43

Stub Tubes

45

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP/UHP 3600A series Actuated

HP/UHP Diaphragm Stop Valves Typical Dimensions

Specification

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Actuator Port

Ø49 118

Normally closed and normally open actuated variants of the HP/UHP 3600 series are available.

The normally closed actuator (LA5) is opened by a low-pressure pneumatic piston and closed by a spring.

The normally open actuator (LA4) is closed by a lowpressure pneumatic piston and opened by a spring.

The operating force is magnified by an internal hydraulic system.

The specifications of the valve are the same as for the manual variant.

• Actuator body material: Aluminium alloy • Actuator port: 1/8” NPT • Actuator pressure: 5 bar (75psi) nominal, 7 bar (100 psi) maximum • Weight: approx 0.7kg

in mm except where shown otherwise

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP Stop Valves

®

Sealed Spindle

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description HP (High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise “dead” areas where contaminants might collect. Elastomers are not used and polymers are carefully selected for suitability.

HP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of stop valves in which the metal valve spindle seats directly on a seating face in the valve body. O-rings with back-up rings prevent leakage along the spindle.

HP2200 valves have a partially balanced spindle to reduce the load applied by the process pressure. This means that handwheel torque is low even at the maximum operating pressure of the valve and a relatively small actuator can be used.

Pneumatically actuated variants are available.

Some variants of these valves have passed adiabatic shock tests at the independent test houses BAM and CTE to qualify them for use with Oxygen.

Standard Materials

Alternative materials can be supplied

• Body: Stainless Steel, Monel or Brass • Valve: Stainless Steel or Brass

• O rings: Viton or EPDM • Back up rings: PTFE or Nylon

Options

Ordering Information

• • • • •

Please contact us for details

Ports: alternative port configurations can be supplied.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

The control knob for HP2000 and 2100 is available in metal or plastic in two styles.

A metal handwheel with a locking mechanism is also available.

Certification: variants are available approved for use with Oxygen, for medical Oxygen service or for ATEX service. Some variants have passed adiabatic shock (BAM) tests.

• • • • • • • • •

Please supply the following information when ordering

Valve size Actuator required Type of control knob required Locking required Maximum working pressure Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP2000 Stop Valve (4mm)

HP Stop Valves Sealed Spindle

Specification • • •

Control Knob available in Aluminium Alloy or Plastic

Nominal Bore: 4mm Maximum working pressure: 400bar (5800psi) Inlet & outlet Ports: 1/4” NPT female (alternative ports can be supplied) Temperature range: -20 to +150°C (extended temperature range versions can be supplied)

Ø72

12

89

•

in mm except where shown otherwise

Typical Dimensions

Ø57

HP2000 Alternative Handwheels

in mm except where shown otherwise

Typical Dimensions

Optional Locking Aluminium Alloy Handwheel Ø89 Alternative Plastic Handwheel

Ø57

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

12

12

103

104

Ø64

Ø57

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP2000A Normally Closed Actuated Valve

®

HP Stop Valves Sealed Spindle

in mm except where shown otherwise

Typical Dimensions

Specification

Ø115

146

The normally closed actuated variant of HP2000 is opened by a low-pressure pneumatic piston and closed by a spring.

The specifications of the valve are the same as for the manual variant.

• Actuator port: G1/8 • Actuator pressure: 7 bar (100 psi)

60

Actuator Port

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP2100 Stop Valve (8mm)

HP Stop Valves Sealed Spindle

Control Knob available in Aluminium Alloy or Plastic

Specification • • •

Nominal Bore: 8mm Maximum working pressure: 400bar (5800psi) Inlet & outlet Ports: 1/2” NPT female (alternative ports can be supplied) Temperature range: -20 to +150°C (extended temperature range versions can be supplied)

Ø97

22

131

•

in mm except where shown otherwise

Typical Dimensions

Ø83

HP2100A Normally Closed Actuated Valve

Typical Dimensions

Specification

in mm except where shown otherwise

Ø148

236

The normally closed actuated variant of HP2100 is opened by a low-pressure pneumatic piston and closed by a spring.

The specifications of the valve are the same as for the manual variant.

• Actuator port: G1/8 • Actuator pressure: 7 bar (100 psi)

94

Actuator Port

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

HP2200 Stop Valve (12.5mm)

HP Stop Valves Sealed Spindle in mm except where shown otherwise

Typical Dimensions

Specification

20

•

Nominal Bore: 12.5mm Maximum working pressure: 400bar (5800psi) Inlet & outlet Ports: 1/2” NPT female (alternative ports can be supplied) Temperature range: -20 to +150°C (extended temperature range versions can be supplied)

232

• • •

Ø102 177

HP2200A Normally Closed Actuated Valve

in mm except where shown otherwise

Typical Dimensions

Specification

Ø179

The normally closed actuated variant of HP2200 is opened by a low-pressure pneumatic piston and closed by a spring.

The specifications of the valve are the same as for the manual variant.

• Actuator port: G1/8 • Actuator pressure: 7 bar (100 psi)

133

303

Actuator Port

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

UHP Bellows Stop Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. Elastomers and polymers are carefully selected for suitability. Parts are machined to a high surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

CFASV is an actuated stop valve in which a long stroke bellows isolates the operating mechanism from the process fluids. The valve is sealed by a polymer seat.

CFASV is intended for vacuum purging of empty gas cylinders. The valve can withstand the rated pressure of a full cylinder on the inlet but will not open unless the inlet pressure is below a safe value.

To prevent the shedding of particulate contamination, there are no sliding, rotating or rubbing components in the flow path.

A test port is provided to detect and contain leakage across the bellows.

Build Standards • • • •

Built to ultra high purity standards in a dedicated • clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

• Final assembly and testing is carried out under class 10 conditions.

No lubrication is used in the flow path and the seat materials are chosen for minimal gas absorption.

Standard Materials • Body: Stainless Steel • Valve: Stainless Steel

Each valve is tested for leakage using a mass spectrometer.

Leak rate is less than 10-7 mbar l/s of Helium, across seat, less than 10-8 mbar l/s of Helium, outboard, less than 10-9 mbar l/s of Helium, inboard.

Alternative materials can be supplied

• Seat: PCTFE • Bellows: Stainless Steel

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

UHP Bellows Stop Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Options • • •

Ordering Information

Please contact us for details

Ports: alternative port configurations can be supplied.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Certification: variants are available approved for use with Oxygen, for medical Oxygen service or for ATEX service.

• • • • • •

Please supply the following information when ordering

Valve size Maximum working pressure Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements

CFASV •

Specification • • • • •

Nominal Bore: 20mm Maximum inlet pressure – valve closed: 250bar (3625psi) Working inlet pressure range: vacuum to 1.9barg (28psig) – valve will not open at higher pressures Actuator pressure 3bar (44psi) Flow factor (Cv): 9

Typical Dimensions

Inlet Port: 1/2” Cajon VCR compatible female swivel, or stub tube for welding • Outlet Port: stub tube for welding • Actuator port: 1/8” NPT female • Test port: 1/8” NPT female with 1/4” Cajon VCR compatible male adaptor (alternative ports and various sizes of stub tube can be supplied) • Temperature range: -10 to +30°C

in mm except where shown otherwise Ø52

162

175

Actuator Port

Test Port

125

Outlet

62

Inlet 36

Ø74

66 147

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Non-Return Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise “dead” areas where contaminants might collect.

Elastomers and polymers are carefully selected for suitability.

UHP uses a similar design to HP but the parts are machined to a better surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

HP/UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of spring-loaded, non-return or check valves. They are suitable for use with gases or liquids to prevent reverse flow in high-pressure lines.

The valves are sealed by an elastomer O ring. The main closing force is provided by the process pressure.

The spring ensures that the valve will close at any orientation. The opening (cracking) pressure can be selected by specifying the strength of the closing spring.

The internal design of the valve ensures that there is minimal restriction to flow.

Options • • •

Please contact us for details

Ports: alternative port configurations can be supplied.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Certification: variants are available approved for use with Oxygen, for medical Oxygen service or for ATEX service.

Build Standards (UHP only) • • • • •

•

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Leak rate is less than 10-9 mbar l/s of Helium, inboard, outboard and across seat.

No lubrication is used in the flow path and the seat materials are chosen for minimal gas absorption.

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

HP/UHP

®

Non-Return Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Standard Specification • •

See next page for specification of individual types

Temperature range: -23 to +205°C for Viton seals, -20 to +100°C for Nitrile seals Maximum inlet pressure: 376bar (5450psi)

Ordering Information • • • • • •

•

HP10

Please supply the following information when ordering

Valve size Lift pressure Maximum working pressure Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements in mm except where shown otherwise

Typical Dimensions

Specification • • • •

Standard Materials • • • •

19 A/F

Ports: 1/4” NPT male or female in any combination Cracking pressures: 0.2 bar (0.3psi), 0.07 bar (1psi), 0.7 bar (10psi), 1.7 bar (25psi), 3.5 bar (50psi), 7 bar (100psi) Flow factor (Cv): 0.45 Weight: 100gm

72

Alternative materials can be supplied

Body: Stainless Steel or Brass Spring: Stainless Steel or Inconel O ring: Viton, Nitrile or Kalrez Guide Ring: PTCFE or Nylon

UHP10

19 A/F

Typical Dimensions

in mm except where shown otherwise

Specification • • • •

Ports: 1/4” Cajon VCR compatible male or female in any combination Cracking pressures: 0.07 bar (1psi), 0.7 bar (10psi), 1.7 bar (25psi) Flow factor (Cv): 0.3 Weight: 70gm

Standard Materials • • • •

17 A/F

56

Alternative materials can be supplied

Body: Stainless Steel or Monel Spring: Stainless Steel or Inconel O ring: Viton, Nitrile, Kalrez or EPR Gasket: PTFE

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

17 A/F

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

UHP Relief Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description UHP (Ultra High Purity) products are for service where the product must be kept free of contamination.

Elastomers and polymers are carefully selected for suitability. Parts are machined to a high surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

We offer a range of differential relief valves. The valve is operated by an internal piston or diaphragm that is larger than the flow area. The process pressure acts on the difference in these areas (hence “differential”). This means that the spring can be small for high pressures. It also means the valve snaps open to full bore because as soon as the valve starts to open the process pressure acts on the full piston area.

Each valve is adjustable within a range of pressures.

The range depends on the size of the piston or diaphragm and the strength of the spring.

Options • • •

Ports: alternative port configurations can be supplied.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Certification: variants are available approved for use with Oxygen, for ATEX service or as “Safety Accessories” to PED Category 4.

Ordering Information • • • •

Please contact us for details

Build Standards • • •

•

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Please supply the following information when ordering

Relief pressure range Relief set pressure – we can supply valves pre-set to your required pressure Wire locking required (please state set pressure) Flow medium

• •

•

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Port configuration Operating and storage temperature ranges Certification and QA requirements

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

UHP Relief Valve

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

CFRVS High Pressure

in mm except where shown otherwise

Typical Dimensions

Specification

Ø30

•

Pressure ranges:

• • • • •

Nominal bore: 10mm Inlet Port: 1/2” Cajon VCR male Exhaust Port: 1/2” NPT female Weight: 0.5kg Temperature range: -10 to +100°C

Standard Materials

158

36 square Inlet

Alternative materials can be supplied

Body: Stainless Steel Spring Housing: Gunmetal Valve: Stainless Steel Valve Seat: Polyurethane ULON O rings: Viton Back up rings: PTFE

48

• • • • • •

2 to 12 bar (30 to 175 psi), 5 to 30 bar (70 to 430 psi), 17 to 120 bar (250 to 1750 psi), 120 to 320 bar (1750 to 4650 psi)

38 Exhaust

CFLRV Low Pressure

Typical Dimensions

Specification •

Pressure ranges:

• • • • •

Nominal bore: 6mm Inlet Port: 1/4” Cajon VCR male Exhaust Port: 3/8” NPT female Weight: 0.5kg Temperature range: -10 to +100°C

• • •

Ø60

Alternative materials can be supplied

Body: Stainless Steel Spring Housing: Aluminium Alloy Diaphragm: Viton

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

121

0.5 to 2 bar (7 to 30 psi), 2 to 5.5 bar (30 to 80 psi)

Exhaust 32

Standard Materials

in mm except where shown otherwise

Inlet

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

UHP Vacuum Generator

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company Description UHP (Ultra High Purity) products are for service where the product must be kept free of contamination.

Elastomers and polymers are carefully selected for suitability. Parts are machined to a high surface finish to improve cleanliness. The valve is assembled in a clean room and is Helium leak tested by mass spectrometer.

UHP products may be used on reactive, corrosive and/or toxic products. Special materials are available for resistance to particularly aggressive chemicals.

The UHP30 vacuum generator uses an ejector mechanism in which a flow of gas creates a vacuum.

There are no seals and no moving parts. The body is machined from a single part so there are no leak paths.

The vacuum generator is rated to withstand the rated pressure of a full gas cylinder.

Options • • •

Ports: alternative port configurations can be supplied including additional ports for gauges and relief valves.

Materials: suitable combinations of materials can be supplied for various applications such as Oxygen service or semiconductor manufacturing.

Certification: variants are available approved for use with Oxygen or for ATEX service.

Ordering Information • • • • •

Please contact us for details

Please supply the following information when ordering

Inlet Pressure Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements

Build Standards • • •

•

Built to ultra high purity standards in a dedicated clean room facility.

Ra 10 to 15 micro inch finish on wetted surfaces.

Final assembly and testing is carried out under class 10 conditions.

Each valve is tested for leakage using a mass spectrometer.

Standard Materials

Alternative materials can be supplied

• Body: Stainless Steel or Monel • Internal jets: Stainless Steel or Monel

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

UHP Vacuum Generator

®

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

UHP30

Typical Dimensions

in mm except where shown otherwise

Specification Maximum pressure: 372bar (5400psi) Recommended inlet pressure: 4bar (60psi) Inlet and vacuum ports: 1/4” Cajon VCR compatible male Outlet port: 1/2” Cajon VCR compatible male Temperature range: -40 to +300°C Weight: 135gm

• • •

51 24 Vacuum

Outlet

33

• • •

Inlet

Typical Performance Characteristics 12

30

Vacuum inch Hg

25 20 15 10 5 0

10

20

30

40

50

60

70

24

Flow l/min Outlet restriction must be less than the equivalent of a 6.3mm ID tube of 300mm length

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

Clean Gas Panels

A CIRCOR International, Inc. Company Description Clean gas panels consist of one or more of our High Purity regulators mounted on a panel with gauges and stop valves.

The configurations shown here use the HP1550 regulator and offer flow rates of about 150 l/min at 10bar. Similar configurations can be supplied using our HP1100 to give higher flow or our two stage HP1700 to give better accuracy.

For more details of the flow characteristics please see our Clean gas regulators data sheet.

We can supply systems with appropriately rated pressure gauges and relief valves to operate at different inlet and outlet pressures from those shown below.

Standard Configurations The configurations shown in detail on the following pages are available as standard items: • Type 2 Regulator Station • Type 5 Regulator Station • ACU1550 Auto Changeover Unit Other configurations can be designed as required. Please contact us for details.

Standard Specification

Standard Materials

• •

•

Nominal Bore: 6mm Temperature range: -20 to +70°C

Options • • •

Please contact us for details

Ports: alternative port configurations can be supplied Materials: suitable combinations of materials can be supplied for various applications.

Bottle connections: we can supply metal tube or flexible hose connections terminated with any industry standard connector

Valve bodies and panel: Stainless Steel

Ordering Information • • • • • • •

Alternative materials can be supplied

Please supply the following information when ordering

Panel Configuration Inlet Pressure Outlet pressure range Flow medium Port configuration Operating and storage temperature ranges Certification and QA requirements

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Clean Gas Panels

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

Type 2 Regulator Station Specification Single stage regulator station with stop valve to vent the inlet, stop valve to isolate the outlet, pressure gauges on inlet and outlet and a relief valve to prevent over pressure.

• Inlet pressure: 200bar (2900psi).

Alternative inlet pressures up to 376bar can be supplied.

• Outlet pressure: 0 to 10bar (0 to 145psi) Alternative outlet pressure ranges can be supplied - see the data sheet for HP1550 • Weight: approx. 3kg

170

Typical Dimensions

Typical P & ID Inlet Pressure Gauge

Outlet Pressure Gauge

Vent/ Purge

Outlet Controller

Outlet Stop Valve Relief Valve

Vent Stop Valve Inlet

in mm except where shown otherwise

Outlet Inlet

Vent/ Purge

260

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

200

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Excellence in Pressure & Flow Control

Clean Gas Panels

A CIRCOR International, Inc. Company

Type 5 Regulator Station Specification Single stage regulator station with stop valve to isolate the inlet outlet and a pressure gauge on the outlet.

• Inlet pressure: 376bar (5450psi).

• Outlet pressure: 0 to 5bar (0 to 73psi) Alternative outlet pressure ranges can be supplied - see the data sheet for HP1550 • Weight: approx. 2kg

Typical Dimensions

Typical P & ID Outlet Pressure Gauge Inlet Outlet Controller

Inlet Stop Valve

Outlet

in mm except where shown otherwise

200

Inlet

Outlet Outlet

130

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

140

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10

HALE HAMILTON

®

Clean Gas Panels

Excellence in Pressure & Flow Control

A CIRCOR International, Inc. Company

ACU1550 Auto Changeover Unit Specification Two stage regulator system in which the first stage automatically accepts gas supply from the cylinder storage bank with the highest pressure. The bank priority is controlled by a lever connected to both first stage regulators. Pressure gauges and stop valves are fitted to control and monitor the flow.

• Inlet pressure: 200bar (2900psi).

Alternative inlet pressures up to 376bar can be supplied.

• Outlet pressure: 0 to 5bar (0 to 73psi) Alternative outlet pressure ranges can be supplied - see the data sheet for HP1550 • Weight: approx. 10kg Typical Dimensions

Typical P & ID Outlet Relief Valve

Outlet Pressure Gauge

Outlet Controller

Inlet Controller Inlet Pressure Gauge

Inlet Controller Inlet Pressure Gauge

Non Return Valve Inlet Stop Valve From Bank B

From Bank A

in mm except where shown otherwise

190

320

252

Outlet

From Bank A

In addition to our standard product range, we have an extensive range of special designs and offer a custom build service. Contact our Sales office if you don’t see what you want in our catalogue.

The information contained within this catalogue is for reference purposes only and is subject to change.

When selecting a product, the total system design must be considered to ensure safe, trouble free performance. Component function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

From Bank B

Hale Hamilton (Valves) Ltd Cowley Road, Uxbridge, UB8 2AF, UK Tel: 01895 236 525 www.halehamilton.com Sep 10