Page 1

Take a basic idea and make it better. Make it quieter. Make it smaller. EDSYN engineers call their new spin on fume extraction the ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan. The unique spinning effect of the filter makes it work like a filter eight times its size. Versatile design allows for personal cooling with clean filters or blow drying a circuit board after cleaning the pads. The arm affords a 180° tilt range and points air flow precisely where you need it so you can breathe easier. Comes in two styles to suit your needs. Works alone or can adapt easily to most in-house fume extraction systems. Being a leader means bringing innovative ideas to life - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the “Original Deluxe SOLDAPULLT” and launched an industry revolution nearly 40 years ago.

® EDSYN Quality

62

DESOLDERING PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com


FXF11 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan (optional accessories shown not included), Page 64

ACCESSORIES DESOLDERING PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com

63


FXF11/FXF12 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fans A compact high efficiency two-stage charcoal impregnated filtration system that delivers optimum filtering capability at the fume source.

FXF11 •

Powerful 12V fan motor draws fume away from operator

Ultra-quiet operation

Rotating front filter provides filtration 8x better than a stationary filter

FXF10 model features only the fan assembly. Stand and base are not included.

Bright front (green) and rear (yellow) LED’s to indicate power and air flow direction

Adjustable to almost any working angle

Quick filter replacement

Internal safety grills

Low static, ESD-safe Specifications for Model FXF11/FXF12/FXF10 Power Requirements

(Solder spools sold separately)

FXF12

Overall Dimension FXF11 FXF12 FXF10 Weight FXF11 FXF12 FXF10

12VDC

5.5”W x 12”H x 5.5”D 140 mm x 305 mm x 140 mm 5.5”W x 12”H x 7”D 140 mm x 305 mm x 178 mm 3.75”W x 4.5”H x 2.6”D 95 mm x 114 mm x 66 mm 1.09 lbs/.49 kg 1.28 lbs/.58 kg 7 oz/199 g

Contents

64

FXF10

ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with XF02 Primary Rotating and XF03 Charcoal Impregnated Filters. Complete Fan Assembly with Filters, 7 oz/199 g.

SR538 SR542 SR541

12VDC Wall Transformer Stand for the FXF11 with Solder Peg Stand for the FXF12 with Solder Peg and SH232 Sponge Holder

XF01 XF02 XF03

Filter Set one each XF02 and XF03 Primary Rotating Filter (set of 5) Charcoal Impregnated Stationary Filter (set of 5)

DESOLDERING Accessories - ATMOSCOPE FUMINATOR Extractor Fans PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com


FG2000 KLATCH Flex Grip A uniquely versatile vise. Able to securely hold and position objects at almost any angle making it far superior than many other holding devices. • Single knob for precise three dimensional positioning of flex arm • Fine tuning knob for minute angular adjustments • Solder spool holder (fits two sizes) • Tray for cleaning sponge or other components • Attachments available to fasten EDSYN FUMINATOR Extractor Fan or “camera type” mounted instruments • Flex arms extend 9”/229 mm • Jaws open to almost 3”/70 mm

Single knob positioning

(Solder spool sold separately)

Secure gripping capability

Minute angular adjustment

Magnetic base option

DESOLDERING Accessories - KLATCH Flex Grip PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com

65


MS410/MS412 Temperature Measurement Systems A compact digital temperature meter system that is suitable for measuring and calibrating soldering tip temperature as well as other temperature controlled products.

MS412 • Auto polarity display • Low battery indication

• Displays in Celsius or Fahrenheit • 3 1/2” digit display

• Data hold feature • Helps with ISO 9000 compliance

• 0.1 resolution up to 199.9°

Contents MS410

Calibration System with FX633 Tool Fixture for a variety of Soldering Tools (carrying case included)

MS412

Calibration System with FX635 Tool Fixture for EDSYN LONER Soldering Tools (carrying case included)

SDS100

Sensor Docking System (Includes TP795 and TP791) Temperature Sensor (Includes WL675) Small Area Surface Temperature Probe Wire Loop (K-Type Thermocouple Wires) Temperature Meter WIGAPRY Low Static Computer Aid KLATCH Dip Squeezer

TP795 TP791 WL675 TI680 WP556 DS299

Items listed above are included for both systems

66

Specifications for Model MS410/MS412

Accessories

Specifications

Type

K Type Thermocouple

TP792 (Sold separately)

Range

-58°F - 1999°F/-50°C - 1300°C

Unit Display

°C or °F

Submersible Temperature Probe .125” Dia. x 7.5” 3 mm x 191 mm 1832°F/1000°C Maximum Temperature

Sampling Rate

2.5 times per second

TP794 (Sold separately)

Electrical Specifications

23°C ±5° at 90% relative humidity

Large Surface Area Temperature Probe .590” Dia. x 3.4” 15 mm x 86 mm 1382°F/750°C Maximum Temperature

Maximum input voltage for thermocouple

60VDC, 24VAC

Operating Temperature

32°F - 122°F/0°C - 50°C

Storage Temperature

10°F - 140°F/-12°C - 60°C

Power Supply

9VDC, 200 Hours continuous use battery life (included)

Overall Dimensions

5.6”W x 2.8”H x 1.3”D 142 mm x 71 mm x 33 mm

Weight

8.5 oz/241 g

Thermocouple Material

K(CA) NiCR/NiAL

Contact Type

Insulation Type

Accuracy

±.75% or ±2.2°C

Minimum Temperature

-58°F/-50°C

Compensating Lead Wire

-20°C - 90°C

Handle

302°F/150°C

DESOLDERING Accessories - Temperature Measurement Systems PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com


Accessories For MS410/MS412 FX635 Tool Fixture for MS412

TP791 Small Area Surface Temperature Probe

TP792 Submersible Temperature Probe

TP794 Large Area Surface Temperature Probe

TP795 Temperature Sensor with WL675 Wire Loops

XF01 Filter Set

Accessories For FXF10/FXF11/FXF12 XF02 FUMINATOR Primary XF03 Charcoal impregnated Rotating Filter

Stationary Filter

XF02 FUMINATOR Primary Rotating Filter

XF03 Charcoal Impregnated Stationary Filter

(Set of 5)

(Set of 5)

Accessories - Temperature Measurement Systems/Atmoscope Fuminators DESOLDERING PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com

67


AFX74

WP286

CS468/CS468-1/CS468-2

ATMOSCOPE Fume Filter Tank for Fume Extraction

WIGAPRY Desoldering Aid

Tip Cleaning Shafts for HT500 CS468 .05”/1.3 mm Dia

WP556

CS468-1 .025”/.64 mm Dia.

WIGAPRY Low Static Computer Aid

CS468-2 .010”/.25 mm Dia. (not shown)

PD528 Tool Pod

PD529

for All EDSYN Soldering Stations SC581 Included

Tool Holder for Quadra-Flow Tips, CROWN Tips, or Hammer Head Tips

PD532

PD525 Tool Pod

OPT812 Conversion Accessory

Tool Holder for LP200, LP200S and LP250 Pick-Up Tools

for Hot Air Stations using FA069

for Dual to Triple Soldering Station (Includes PD528 and PA233)

PD533 Tool Pod for Hot Air Tools 1051, 1052, 1036DX

SC581 Replacement Solder Debris Collector

PA233 Dovetail Extension Bracket (1 pair) for Converting a Dual Station to a Triple Station. PA233-1 is only a single bracket.

68

SD302 Solder Dispenser with TH100 Tip Holder

SD300 Solder Dispenser

TH101Tip Holder and Storage Peg TH100 Tip Holder

(Solder spool and soldering tips sold separately)

(Solder spool sold separately)

(Soldering tips sold separately)

DESOLDERING

Accessories

PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com


VA175 Air and Vacuum Pick-Up System A revolutionary pick and place system that uses direct air pressure or vacuum to pick-up components. •

Requires clean and dry shop air, 60-90 psi

ESD-safe

Quiet operation

Ultra-lightweight tool

Equipped with vacuum release valve

Easy adjustment knob for vacuum or air pressure

Use as a blower for cleaning or cooling hot components

Variety of suction cup sizes available

Uses high flow suction to pick-up small parts

Lift and cool down components by using positive air pressure

New Techniques Award EDSYN Hummerworks has rated this product The Most Unique New Tool in its current product line. Our preliminary tests show that the use of the VA175 stimulates new ideas and procedures that address the changing environment of electronic production. The VA175 Air and Vacuum Pick-Up Tool was designed for those that enjoy interacting with the tools they use to accomplish more with less...

The VA175 features a comfortable ultra-lightweight hand tool that works well on a variety of SMD sizes using air pressure or vacuum. Positive air pressure causes the component to fly into the pick-up tool thereby lifting and cooling at the same time.

DESOLDERING Accessories - SOLDAVAC Air and Vacuum Pick-up System PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com

69


LP200 SOLDAVAC Lifter by Pen Vac Portable Vacuum

LP200S SOLDAVAC Lifter by Pen Vac Stealth Portable

Pick-Up Tool

Vacuum Pick-Up Tool

(Includes 3 suction cups and lifting needles)

(Includes 2 suction cups and lifting needles)

LP250 SOLDAVAC Pick-Up Tool

LP251 SOLDAVAC Pick-Up Tool with SMD Component Release

for SMD components (Requires Vacuum Source)

Valve (Requires Vacuum Source)

(Includes PD532 Pick-Up Tool Holder)

ST706 SMD Tool to lift off SMD while using Hot Air Tools

(Includes PD532 Pick-Up Tool Holder)

ST707 Soldering Tool Maintenance Brush

(ST707-1 Replacement Stainless Steel Brush)

70

ST800 SMD Helper to remove SMD’s while using Soldering Tools or Hot Air Tools

(BWS22 Set of two Pull Wires and two Shim Blades included)

DESOLDERING Accessories - SOLDAVAC Pick-Up Vacuum Tools PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com


Face Size SP125 OCTAVAC Low Static Silicone Suction Cup

1/8” Dia 3.2 mm

SP250 OCTAVAC Low Static Silicone Suction Cup

1/4” Dia 6.4 mm

SP375 OCTAVAC Low Static Silicone Suction Cup

3/8” Dia 9.5 mm

LN250 Small Lifting Angled Needle with SP125

1/8” Dia 3.2 mm

LN260 Medium Lifting Angled Needle with SP250

1/4” Dia 6.4 mm

LN270 Large Lifting Angled Needle with SP375

3/8” Dia 9.5 mm

LN251 Small Lifting Straight Needle with SP125

1/8” Dia 3.2 mm

LN261 Medium Lifting Straight Needle with SP250

1/4” Dia 6.4 mm

LN271 Large Lifting Straight Needle with SP375

3/8” Dia 9.5 mm

LP200

LP200S

LP250

LP251

SPS12 1/8” Dia Stealth Low Static High Temperature Suction Cup 3.2 mm SPS25 1/4” Dia Stealth Low Static High Temperature Suction Cup 6.4 mm LN270S Stealth Lifting Needle with SPS12 and SPS25 Suction Cups

DS299

KLATCH Dip Squeezers

(AF039 Foam Filter and RS190 Sponge included)

1/4” Dia 6.4 mm

LK773H Universal Temperature Lock Knob with Adjustment Hole for LONER Soldering Stations

LK773 Universal Temperature Lock Knob without Adjustment Hole

STC84 Soldering Tip Cleaning Bar

RS199 Replacement Sponge and SH230 Sponge Holder sold separately

DESOLDERING Accessories - SOLDAVAC Pick-Up Vacuum Tools PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsyn.com

71

Accessoires  

® EDSYN Quality 62 PHONE: 818.989.2324 • FAX (Sales): 818.997.0895 • FAX (Service): 818.997.0460 • Email:info@edsyn.com • INTERNET: www.edsy...