Length: 42”/ 107cm & 38”/ 98cm Width: 8.5”/ 21.5cm Wheelbase: 37”/ 94cm & 33.5”/ 85cm
Five flexes spread out over two lengths.
42”/107cm Flex 1: 175‐230+lbs / 80‐105+kg 42”/107cm Flex 2: 150‐210+lbs / 68‐95+kg 38”/98cm Flex 3: 150‐200+lbs / 68‐90+kg 38”/98cm Flex 4: 120‐170+lbs / 55‐77+kg 38”/98cm Flex 5: 80‐140+lbs / 35‐65+kg The one that started it all. Symmetrical shape and stance for a balanced center of gravity to increase the ability to weight the deck through turns for better control and energy generation. The sidecuts allow for decreased torsional stiffness between the feet to exploit the board’s torsional energy to allow for greater nuances in the turning radius. The Vanguard was designed and intended for speeds between 0 and 25 mph (0‐40km/hr). You can take the board faster with skill and experience, but it is not intended for higher speeds due to its flex characteristics.
Length: 41.5” / 105cm Width: 8.5” / 21.5cm Wheelbase: 33” / 84cm Flex 1: 170‐230+lbs / 77‐105+kg Flex 2: 100‐185+lbs / 45‐85+kg With a lower center of gravity and a torsionally stiff design, the Dervishes are built to hold an edge and maximize energy return.A drop‐thru carver designed to work with most reverse kingpin geometry trucks and 70mm+ wheels. The dropthru design allows for easier pushing, more stability at speed, and easier sliding. It has a small flat nose and tail for manual and shovit tricks. The Dervish was designed and intended for speeds between 0 and 30 mph (0‐50km/hr). You can take the board faster with skill and experience, but it is not intended for higher speeds due to its flex characteristics.
Length: 33” / 83cm Width: 8.75” / 22cm Wheelbase: 22 - 23” / 56-58cm
Length: 55” / 1.4 meter Width: 9” / 23cm Wheelbase: 40” / 1.01 meter
Flex: One stiff but snappy flex to keep all riders happy. Multiple truck placements let you customize the fee to your taste.
Flex 1: 160‐230+lbs / 72.5‐105+kg Flex 2: 100‐170+lbs / 45‐77.5+kg
With a built‐in tail and subtle nose kick, this replacement for the Fish is a versatile link between carving bliss and old school/street skating. Camber and concave between the kicks allows for carving and pumping, while the nose and tail create a more surf‐oriented feel with lots of opportunities for tricks. Loose and agile, it’s time to explore the limits of your sidewalk and hill thrashing abilities.
55” of dancing decadence. Years in the making and developed by the monster himself, Adam Colton. Designed with functional concerns foremost, the Dancer incorporates a flat and dampened deck for easy cross stepping, as well as built‐in nose and tail kicks for effortless manuals, shovits and g‐turns. Functional wheel cut outs and wheel wells enhance carving ability, while a minimal camber keeps the board damp and forgiving. This baby is a stage for all your latest dancing moves. We know you’re feeling sharp, let the world know.
Length: 35.5”/ 90cm Width: 8.75” / 22cm Wheelbase: 29” / 74cm Flex 1: 200‐280+lbs / 90‐125+kg Flex 2: 190‐250+lbs / 85‐115+kg Flex 3: 140‐220+lbs / 65‐100+kg Flex 4: 80‐190+lbs / 36‐85+kg You will stop sleeping. Sorry, but it’s true. Versatile, light and fluid, this board is designed to promote an assertive, dynamic riding style. It’ll hold it’s own on hills, banks, commuting, and beer runs. But if you’re anything like us, it’s all about the late night parking garage sessions. Glassy eyes and a permanent grin.
Length: 39”/ 99cm Width: 8.75” / 22cm Wheelbase: 30.5” / 77cm Flex 1: Up to 270 lbs Flex 2: 130-210+ lbs Flex 3: 80-170+ lbs The Tan Tien is an amalgamation of technical design, aesthetics, and premium performance. Driven by progressive longboarding as explored by Loaded’s riders, the Tan Tien manifests the desire to develop new tricks and engage new riding styles. From its foot-locking camber, drop-thru truck mounting and pumpable concave, to its responsive nose and tail kicks, the Tan Tien blends carve oriented longboarding with advanced trick riding. Loaded has also added a new technical grip-tape that optimizes flex energy and adds a futuristic visual effect. The complex contours create a super responsive board that allows for increased confidence when leaning into turns, popping tricks, and powering through slides. With the woven bamboo bottom and the funky grip design it’s easy on the eyes, but you’ll need to ride this board to truly fathom it’s potential. The Tan Tien is 39” in length with a 27” wheelbase, and is designed to work with 180mm reversed kingpin trucks and 70mm wheels. Ride on!
FREERIDE SLIDE GLOVES ROUND 4
Now with Coolmax wicking fabric for more breathability and a refined, more form fitting shape reducing excess fabric on the thumb and wrists. Built with burly wrist protection (including a removable foam pad and a serious wrist strap), Reflective lining, Breathable mesh top, Heavy duty Nylon/Kevlar construction, Velcro for the finger, palm and thumb pucks. UHMW round thumb puck and palm pucks, and hard plastic finger pucks.
High quality goatskin leather, Carbon knuckle and finger protectors, Leather reinforcement, Breathable mesh top, internal Coolmax速 wicking fabric, Reflective sections, Velcro palms, finger tips and thumbs, Ergonomic finger shapes, Ultra High Molecular Weight circular palm and thumb pucks, High density finger pucks, No PVCs. All the bells and whistles
Complete 6 pc. Set of Pucks
Finger and Thumb Pucks
UHMW Slide Pucks: Set of 2
6 piece set of pucks, all with velcro backing. Includes 2 Loaded Slide Pucks 6 piece set of pucks, all with velcro backing. Includes 2 Loaded Slide Pucks (grey palm pucks), 2 High Density finger pucks (black), and 2 Ultra High Density thumb pucks (green). Because you rip
4 piece Finger and Thumb puck kit. Includes 2 High Density finger pucks (black and lime), that are designed to slow you down when you need it, and slide when you donâ€™t. Also includes our Ultra High Density green thumb pucks for thumb puck ups. Velcro backing of course.
Loaded Slide Pucks. Durable, thick and wide, these pucks are now the standard palm puck on all our gloves. Velcro backing. Set of 2.
The Loaded Board P.O.P. Display
This Point of Purchase Display ships flat and is easy and quick to assemble requiring no tools aside from a brain and two hands. Constructed of 70% post-consumer recycled material, water based inks, and 100% recyclable, this display holds up to 14 boards (put the heavier ones on the bottom). Enjoy with cake.
JEHU Performance Bearings with Spacers
Designed for speed and durability, these bearings were developed and tested for the rigors of performance longboarding. Serviceable shields for maintenance. Speed gel lubricant designed for durability and exceptional free spin characteristics out of the box. Interior step ring to maintain constant lubrication. Super finish for extra smooth precision.
Adam Squared MAKE YOU sMILE
Hold on to your hats and loved ones: MAKE YOU sMILE is here. Over 2 hours of mindbending short films masterminded by Adam Colton and Adam Stokowski (Adam Squared) and produced by Loaded. Full size versions of many of Adamsâ€™ web films and 8 new films. You know what it is and you know itâ€™s good.
Loaded Organic Cotton T-Shirt #2
Organic cotton printed with water based inks and completely made here in LA in sweatshop free facilities. Super soft and comfy, these T‐s are on the smaller side (“fitted”) and will shrink, so choose the size accordingly. Available in “Natural” color. Big fat brown Loaded logo. Love it.
Adam Colton Monster Shirt FRANK
My name is Adam Colton and whenever I get the urge I draw weird Monster creatures. One of my original drawings has made it onto a very comfy organic cotton T‐shirt, THANKS LOADED!!! Meet Frank the monster, he is a bit of a grump and has a big nose but his intentions are good. He has one tooth that he uses to open tuna cans, he loves him some tuna, hmmmm. He has lots of wrinkles under his eyes from staring directly at the sun and his hands are mangled because a sewer lid was drop on them. Rock the shirt proudly and please make up ridiculous stories about Frank the Monster to share with friends. Thanks for the support.
70mm tall with a Contact patch (width of wheel in contact with ground) of 53mm. Available in a harder 83a (Purple) as well as a softer 80a (Orange). These wheels are intended for grippy, hard carving,pumping and speed. They will slide when broken in, but they arenâ€™t freeride wheels. The 4President features an offset design with subtle lip characteristics for increased grip, speed, and high energy return.
75mm tall with a Contact patch (width of wheel in contact with ground) of 56mm. Now available in a harder 83a (Purple) as well as a softer 80a (Orange). These wheels are intended for grippy, hard carving, pumping and speed. They will slide when broken in, but they arenâ€™t freeride wheels. The In Heat features an offset design, with hard sharp edges for grip, thick lips for maintaining speed, and rippled inner walls for progressive energy return.
75mm tall with a Contact patch (width of wheel in contact with ground) of 45mm. These offset wheels are intended for grippy, hard carving and consistent, controlled slides. Double rounded lips, and a stone ground/pre‐broken in surface for smooth slides out of the box. Available in 83a (purple) and now in 86a (yellow)
70mm tall with a Contact patch (width of wheel in contact with ground) of 42mm. These offset wheels are intended for grippy, hard carving and consistent, controlled slides. Double rounded lips, and a stone ground/pre‐broken in surface for smooth slides out of the box. Available in 83a (purple) and now in 86a (yellow).
65mm tall with a Contact patch (width of wheel in contact with ground) of 37mm. These offset wheels are intended for grippy, hard carving and consistent, controlled slides. Double rounded lips, and a stone ground/pre‐broken in surface for smooth slides out of the box. Available in 83a (purple) and now in 86a (yellow)
Orangatang Organic Cotton T‐Shirt
Organic cotton and printed with water based inks and completely made here in LA in sweatshop free facilities. A bit on the tighter “fitted” side, so choose your size accordingly. Looks good with a necklace made of wheels.
Published on Jan 25, 2011