Page 1

VK-CPC-1 Viking Electronics Review Viking electronics is one of the best brands when it comes to producing telephonic equipment. For instance, the VK-CPC-1 Viking Electronics is a high standard call party control product by the company. How does it work? What is this product used for? These are some questions that users have in their minds. The VK-CDC-1 creates a break in the telephone line when the user receives a voice mail when he is on call. Along with that, this product comes with a one year warranty from Viking. Thus, if there is any problem, the user can get back to the company and get the needed replacements made without any additional charges.



The VK-CPC-1 comes with a signal generator. When it detects a busy signal, the line gets disconnected for one second after which the tone is returned. The phone line with the VK-CPC-1is powered and an alternate current (AC) source is not required.



An emergency device needs to be installed outdoor. Thus, should have the ability to tolerate hot temperatures. The VK-CPC-1 Viking Electronics can easily tolerate temperatures up to 32 degree Celsius. Thus, users can install it outdoors without any apprehensions.



The signal generator of calling party control has a very simple but highly effective working process. If it detects a busy signal, it hangs up for a time span of one second. Once the status changes, the number is redialed. The call part control disconnects a telephone line mostly when there is an incoming voice mail. In other words, a call party control device disconnects an ongoing call when an automated telecommunication message has to be entertained. When is the disconnection performed?


A lot of users do have questions about how the line is disconnected. The basic function of a call party control device is to check the status of the telephone line at all times. In other words, it keeps a check on the audio activity performed on the telephone line. An ongoing call is dropped as soon as a busy signal is witnessed. 

The CPC-1 is a high standard call party control device by all means and comes with a programmable feature. This device can be programmed to disconnect an ongoing call even when there is silence for a long time. Similarly, it can be programmed to disconnect a signal when the dial tone is steady. LED Status As compared to other call party control devices, the CPC-1 is easier and has a better user interface. For instance, there is an LED light which highlights the status of the audio activity. The LED light shows different behaviors to identify the status.

If the signal is busy, the LED will flip between the “on” and “extra bright” status. Thus, if you see the LED light switching, you can reach the conclusion that the status is busy.

If audio is detected, the LED light would be stable and extra bright. Similarly, when there has been interrupted silence for a long time, the LED light would be “on” and there would be no blinking.

An important area which users do get concerned about is the LED light status when the line has been disconnected for one second. When the line would be disconnected, the LED light would not be in “on” or “extra bright” state. Instead, it would go into “off” state for a short time. The duration would be one second after which the dial tone would be resumed. Similarly, when the telephone line is not in use at all, it would remain turned off. Interpretation of CPC signal If you compare the working process of this Viking call party control device with what other brands put on the table for the users, you would figure out that the CPC-1 has a much easier technical infrastructure. In addition to that, the status of the LED light would depend on the status of the CPC signal. For instance, when there is no signal, the LED light would remain off. Overall Review Viking is surely one of the best brands when one talks about call party control devices and other similar equipment. Users do not need to have advanced technical knowledge to use this CPC.

In terms of performance, the VK-CPC-1 Viking Electronics is nothing less than exceptional. The best thing is that the user does not require an AC connection for the telephone line. The user can conveniently use this call party control device as it works with a powered telephone line.




This call party control device is used for various purposes. One of them is the voice mail for PABX phone lines. When there is an incoming voice mail and the user is communicating on the PABX line, the call would be disconnected for one second. After that, the number on which the user had been communicating would be redialed and he would be able to resume his communication. Visit our site: https://www.goheadsets.com/

Vk cpc 1 viking electronics  

Viking electronics is one of the best brands when it comes to producing telephonic equipment. For instance, the VK-CPC-1 Viking Electronics...

Vk cpc 1 viking electronics  

Viking electronics is one of the best brands when it comes to producing telephonic equipment. For instance, the VK-CPC-1 Viking Electronics...

Advertisement