Issuu on Google+

G LENDINNING

TECHNICAL BULLETIN Cable Installation through Limit Switch Assembly MARINE PRODUCTS, INC.

Installing the power cable in a Cablemaster without disconnecting the limit switch assembly

STEP 1: REMOVE OFFSET BRACKET Remove both bolts which fasten the Offset Bracket to the Limit Switch Assembly.

STEP 2: REMOVE HEX HEAD SCREWS AND ROLLER Remove hex head screws which hold the Roller in place. Remove Roller and pin.

STEP 3:

INSERT CABLE AND REASSEMBLE

Insert cable through open gap and reassemble Limit Switch. Attach Offset Bracket.

G LENDINNING MARINE PRODUCTS, INC.

740 Century Circle Conway, SC 29526

(843) 399-6146 (843) 399-5005 www.glendinningprods.com


/Cablemaster_CM_-_Cable_Install_Limit_Switch