Page 1

Digital Design - Module 01 Semester 1, 2018 Tianlin Wang (857847) Han Li 16


Week One

Reading: Zeara Polo, A. 2010. Between Ideas and Matters.

According to Zeara-Polo, the diagram does not play a representational role in the design process but provides an organisational and can have a performative quality depending on how it is deployed. Explain how Diagram is different from Signs and Symbols? (100 words Maximum)

A symbol is a sign which refers to its dynamic object through a formal representation.The relationship between form and content is totally arbitrary and immaterial.Diagram mediate between physical constructs and constructs and concepts or percepts on an organisational level.

2


Week One

Precedent Analysis

elevation

http://image.so.com/ v?q=Zaha+Hadid++Burnham+Pavilion&src=tab_ www&correct=Zaha+Hadid+-+Bu rnham+Pavilion&cmsid=368bef0 f7c0861c8e129bfc05a81eb59&c mran=0&cmras=0&cn=0&gn=0& kn=0#multiple=0&gsrc=1&datain dex=4&id=9662c240493e16f01e aed7afbf05c36a&currsn=0&jdx= 4&fsn=60 Zaha Hadid Burnham Pavilion 2009

The plan view of ZAHA

The image is left side of Zaha, i used this image for building the one of the entrance of Zaha.I traced the outline of the entrance and made it into solid. Then trim it with the hole building. The front view of Zaha with on holes above the roof

3


Week Two

Reading: Hertzberger H. 2005. The in-between and The Habitable Space Between Things, from Lessons for Students in Architecture. Herzberger discusses how design should not be extreme in its functionality. Use your precedent study to explain how the pavilion allows for an appropriation of use. (100 words Maximum)

Such as Montessor School, the entrance should be more than a mere opeaning space since it will have classes and spat. From Burnham Pavilion, it has two entrance which are large enough to welcome and contain many people. So people can get into the entrance quickly and efficiently and get out off . The interior of the building is not complex this also provide people comvenience.People may go to thw interior through two entrance and walk around the centre space.

4


Week Two

Isometric

ISOMETRIC OF NE Since every isometric will hide some of the details of the module. So i chose the best isometric which can repersent enough details. The hole on the roof, one of the entrance and the thickness of the module can be showen on this isometric.I modelled more details on the whole shell. Because acting the mean part of the module, shell is most important. I use loft instead of sweep2 to creat it. I also rebuild them during lost progress to make the the surface between two frame has the lowest error. Circulation repersents the track of most of the people when they visit this building. This will imply the designer so they can design variable terrain to guide the people’s trace. The streamline form of Zaha provides people to see the inside part from all the angles. Understand how many ‘layer’ does the moduld contains is important, such as the threshold, structure and solid. There are two entrance.

5


Tianlin Wang - 857847

3000mm

Week Two

Isometric 1:50

Diagrams

0

1000

3000mm

EN

TR

CE

AN

TR

EN AN

CE EN

TR

CE

AN

TR

EN

AN

CE

Solids

Structure

Solids

Structure

Primary Circulation Space

Fabric&Aluminum

Primary Circulation Space

Fabric&Aluminum

Structure

Circulation paths

Structure

Circulation paths

Circulation 1:200

Thresholds (Permeability) 1:200

Thresholds (Permeability) 1:200

CIRCULATION

THERSHOLD

There are two main entrance so peole can go either the north or south entrance. I work out all the trace that people will walk. Red line means enter and leave by the same entrance. Green one means not the same gate.

6

The whole module is made with two parts. The shell and inner part. Inner part is also the solid of the diagram and smaller than the shell. The material for the frame is aluminum and the surface is made by fabric. And i use pipe to represent the frame work of the module.


Appendix

Process

Traced the south and north side to combined the line work toghther to creat a complete frame work.

Built a entrance sized solid and split it.

7


Appendix Process

Copy the shell and scale it to make a shmller one to be the inside part. Use pointson to show the points on the small frame and stretch them to make sure the height of the inside part is colser to the shell. This can make sure it is more accurate.

8


Appendix interior

surface

frame

9


other direction

Dd journal  
Dd journal  
Advertisement