Page 1

OWNER’S MANUAL Replacement Canopy for Clayton gazebo

Product code: D71 M80930 UPC code: 7-6945575811-8 Vendor Item: C-I-138-2NGZ

Date of purchase: _____/ _____/ _____

1


Gazebo Replacement Canopy

PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended.

A (1) Orignal Canopy Frame (not included in this package)

B (6) New Canopy Fabric

ACCESSORIES Use the follwing parts from your orignal gazebo

Use the follwing parts from the hardware

Ca (6) Bolt

Cd (1) Assembly Instructions Sheet

Cb (12) Metal Washer

Ce (1) Allen Wrench

Cc (6) Nut

Cf (1) Open Hex Wrench

2


Gazebo Replacement Canopy

Special Warning Assemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use care when handing. Assembly by four adults is recommended. The gazebo is not intended to be a permanent structure. Take it down during high winds or it may be damaged. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric may render the flame-resistant properties ineffective. Ca Fig. 1 Cb A Cb Cc

ASSEMBLY INSTRUCTIONS Process of removing gazebo canopy

1

Pull the bars of gazebo frame (A) from the canopy pockets. Remove the bars of the canopy frame out of the brackets of the legs. See Fig. 1.

A

Fig. 2

2

Pull out the short top bars of the canopy frame (A) from the wind vent canopy. Then remove the canopy from the canopy frame (A). See Fig. 2.

A

Process of replacing new gazebo canopy

3

Attach the canopy fabric (B) to the assembled canopy frame (A). Insert each top short bar into each top pocket

A

of the canopy frame. Pull down the canopy and spread the canopy top to the location. See Fig. 3. Fig. 3

3

B


Gazebo Replacement Canopy

4

Place the completed canopy onto the top of the assembled leg posts. Make sure each crossbar is between two edges of the canopy. Line up the holes, for each hole insert a bolt (Ca) through a metal washer (Cb), short bar, a bracket, another metal washer (Cb) and secure with a nut (Cc). Don’t tighten completely. Repeat procedure for the remaining

Ca Fig. 4 Cb A Cb Cc

five short bars. Tighten all bolts and nuts. Pull down the edge of the canopy and insert each bar of the canopy frame (A) into the pocket of the canopy. See Fig. 4. Affix inner edges with Velcro tabs.

Your gazebo with new canopy is now ready for use.

CARE INSTRUCTIONS Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Cover furniture with outdoor furniture covers when not in use.

Please refer to part numbers when reordering For questions or comments about product: Call toll-free: 800-457-4652 Made in CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179

See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com

4

Replacement Canopy for Clayton Gazebo D71 M80930  

Product code: D71 M80930 UPC code: 7-6945575811-8 Date of purchase: _____/ _____/ _____ Vendor Item: C-I-138-2NGZ 1

Read more
Read more
Similar to
Popular now
Just for you