APPROVED COASTAL LIFE JACKETS All jackets are complete with a pealess whistle & instructions printed on the jacket. Approved by the A.M.S.A. Part No. TF465 SAW465 TF460
One Size Only - Adult USL Approved One Size Only - Adult USL Approved Buoyancy exceeds 100n (10.2kgf) One Size Only - Child USL Approved Same as the Adult jacket with a crotch strap.
Enquire About Quantity Discounts
MARINER STANDARD FOAM PFD1
At last a standard PFD1 that can actually be worn. The Mariners Matrix split foam design allows the jacket to bend to the body’s shape while the large neck cut out allows the jacket to be easily fitted and doesn’t restrict neck or chin movements, closed cell foam construction with high visibility yellow fabric covering, reflective tape and easy to adjust waist band. Part No. PFD1 One Adult Size Only - Suitable for 35kgs & Over Enquire About Quantity Discounts
APPROVED SOLAS LIFE JACKETS All jackets are complete with a pealess whistle & instructions printed on the jacket. International Approval No: 2890 Approved by the A.M.S.A. Part No. TF495
One Size Only - Adult
Enquire About Quantity Discounts
LIFE JACKET LIGHTS Life jacket light approved for SOLAS applications. Activation takes place automatically after removal of plug and immersion in salt or fresh water. Provides more than 8 hours of full light intensity. 1 year warranty. 5 year life with plugs attached. Part No. 50114
Solas & Coastal Life Jacket Light - Approved
SOLAS LIFE JACKET STROBE LIGHT Double ‘o-ring’ seal. One ‘c-cell’ battery included. Strong and light in construction. Can be fitted via belt or tied to life jacket. Manual switch. Part No. 50278
PLASTIC PEALESS WHISTLE Required for PFD1 Jackets and many other safety products. Complete with attachment clip and hole for a lanyard. Part No. 50584 Orange Plastic Pealess Whistle
BUOYANCY AID Side fastening zip vest with 30-35 newton buoyancy Conforms to EU safety standards. Soft closed cell foam inner Secure zip front pocket Inner mesh pocket Key clip facility Available in sizes: Small - Medium (60-70kg) Medium - Large (70kg) Extra Large (70kg) Part No. HLBUOYSC (size) HLBUOYR (size)
Colour - Carbon with a Silver & Green stripe Colour - Red
BURKE INFLATABLE LIFE JACKETS These inflatable PFD’S low bulk is the most comfortable way to wear a buoyancy and harness. Manual inflation is by pulling a cord to trigger a 33.grm CO2 cylinder. As a back up the PFD is equipped for oral inflation. The IBSA1496 has automatic inflation (when submersed in water it will inflate) as well as a manual pull cord for inflation. Part No. IBHA1470 with harness auto IBHM1460 with harness manual IBSA1496 standard auto IBSM1486 standard manual IB2520 Recharge kit to suit IBHA1470 & IBSA1496 (Not included CO2 Cylinder Required IB2433) IB2433 Replacement CO2 Cylinder to suit Manual Jackets IBHM1460 and IBSM1486. ICYLAUTO Replacement CO2 Cylinder to suit older style IWS & IEC Automatic Jackets
D2 BUOYANCY VEST PFD 2
CHILDREN’S L1 BUOYANCY VEST PFD 1 Kids soon let you know if they’re happy wearing a buoyancy aid. With this personal experience, Burke designed a standards approved PFD1 that has all the features for comfort and freedom of movement. The split flotation collar with grab handle provides head up support in the water, while on board, lies out of the way as if it doesn’t exist. The collar design allows the jacket to open up wide making fitting a synch. Features include a through the leg strap with easy adjustor, noncorroding YKK zipper with large pull tag, high visibility yellow nylon fabric with blue lining, reflective tape and an easy to adjust waist band.
Side zip entry asymmetric short compact design ideal for dinghy sailing. Soft PVC Nitrel foam, heavy duty non corroding zip, large zipped pocket, drainage mesh, adjustable waist belt, Velcro retained.
Part No. D2XS 25-40kg D2S 40-60kg D2M 60kg & over D2L 60kg & over D2XL 60kg & over
C2 BUOYANCY VEST PFD 2 Side zip entry asymmetric short compact design ideal for paddle shorts. Tapered soft PVC Nitrel foam, heavy duty non corroding zip, large zipped pocket, drainage mesh, adjustable waist belt, attachment lungs front & back.
Part No. L1XXXS L1XXS L1XS
Size 50 - 45cm 70 - 50cm 94 - 75cm
Weight 10 -15kg 12 - 25kg 22 - 40kg
L1 BUOYANCY VEST PFD 1
Part No. C2XS 40-60kg C2S 40-60kg C2M 60kg & Over C2L 60kg & Over C2XL 60kg & Over C2XXL 60kg & Over
Flexible construction allows you to work in comfort and freedom with the security of wearing a standards approved PFD1. Featuring a matrix of vertical and horizontal panels containing “Plyflex” buoyancy foam that allows the jacket to flex with your movements. The matrix collar provides head up support when in the water, while on board, the collar lies out of the way as if it doesn’t exist. The collar allows the jacket to open up wide making the L1 a synch to fit. The hinged skirt greatly reduces the tendency for the jacket to ride up when seated. High visibility yellow nylon fabric covering, non corroding YKK Zipper with large pull tag, reflective tape and easy to adjust waist band.
A multi purpose standards approved PFD2 that is slim fitting, comfortable, light weight and ideal for the active boater. The Matrix of vertical and horizontal panels holds 32 pieces of “Ply Flex” flotation foam providing maximum comfort and freedom of movement while the hinged skirt greatly reduces the tendency for the jacket to ride up when seated. “Ply Flex” is a lot more flexible than the traditional slab of foam and as a result far more comfortable. Smart high visible yellow fabric with fashionable contrast in either pink, blue or purple. A noncorroding YKK zipper with a large pull tag and easy to adjust waist band complete the features of this garment.
Part No. L1XXL 152-114cm 60kg & Over L1XL 132-105cm 60kg & Over L1ML 117-104cm 60kg & Over L1S 103-86cm 40kg to 60kg
Part No. M2XXS M2XS M2S M2ML M2XL M2XXL
M2 BUOYANCY VEST PFD 2
Size 60 - 40cm 71 - 67cm 82 - 69cm 103 - 82cm 123 - 98cm 147 - 113cm
Weight 15 - 30kg 22 - 40kg 40 - 60kg 60kg & over 60kg & over 60kg & over
S2 BUOYANCY VEST PFD 2 The popular S2 is for the competitive sailor that wants a comfortable, light weight and easy to wear, standards approved PFD. The Matrix of horizontal & vertical panels combined with Plyflex flotation ‘mold and flex’ the Matrix S2 to your every move. Features noncorroding zip, high visibility nylon shell with fashionable contrasts, hinged skirt and easy to adjust waistband.
PET PERSONAL FLOATATION DEVICE
FIDO needs floaties – well a canine personal floatation device to be precise. To help Rover out on the river the team at Burke have come up with a great dog vest. Designed for maximum comfort, the Dog Vest comes with side release clips for easy fitting and a grab-handle on top to help lift your dog on and off the boat. With a tough nylon outer shell & closed cell buoyancy foam the Burke Dog Vest has all the safety features Burke has built its reputation on. So now your old sea dog can cruise with a touch of style and more security. Here’s to a dog’s day out.
Part No. S2XL 125-87cm 60kg & over S2L 114-82cm 60kg & over S2M 104-82cm 60kg & over S2S 94-68cm 40-60kg S2XS 77-58cm 22-40kg
X3 SKI PFD 3 Designed by Burke for water & jet skiing. The Matrix X3 utilises the Matrix construction to deliver a light weight, standards approved PFD Type 3 that will flex to every body movement. The X3 has a durable nylon shell in a range of spectacular panel & colour combinations. Features include hinged skirt & multiple easy to adjust waist straps with quick release buckles.
Part No. X3XS X3S X3ML X3XL X3XXL
Size 71 - 67cm 82 - 69cm 103 - 82cm 123 - 98cm 147 - 113cm
Weight 22 - 40kg 40 - 60kg 60kg & over 60kg & over 60kg & over
THROWABLE BUOYANCY CUSHION
Part No. DOG001S DOG001M DOG001L DOG001XL
Fits up to 4kg Fits 3 to 9kg Fits 8 to 18kg Fits 17kg & over
FLEXIBLE HORSESHOE FLOATS Complies with AYF requirements except for reflective tape not fitted. Made from flexible closed foam, with zero water retention and offers continuous flotation. The safety orange double coated PVC nylon fabric cover can be unzipped and replaced if necessary. Float opens and closes with a Fastex side release clip. This PFD is designed “one size fits all”
Part No. LIF220H LIF220R
Horseshoe Float Safety Orange Horseshoe Float Safety Orange with Reflective Tape LIF220HW Horseshoe Float White LIF222B Flexible Horseshoe Float Bag
IMPORTED LIFE BUOY RING
The buoyancy cushion is not a personal flotation device, though it does offer 85 newtons of positive buoyancy. Made from soft closed cell buoyancy foam with a tough blue fabric cover, 2 webbing grab/throw handles designeAd to fit in an emergency diagonally between the arm and leg or both arms. Size 37 x 41cm. Colour blue. Part No. CUS001 Covered by PVC entirely welded. Inside is polystyrene resisting to oil. Complete with line Part No. 50590 650mm (26”) diameter lifebuoy Red & White 50591 650mm (26”) diameter lifebuoy Blue & White
SOLAS LIFE BUOY RINGS Part No. 50121 Solas Approved Life Ring MAGNUM outer dia 24” inner dia 16” with reflective tape and rope. 50122 Solas Approved Life Ring 30” with reflective tape and nylon rope. Made in Australia 50123 Solas Approved Life Ring 30” with reflective tape and silver rope. Made in Australia
75CM LIFE BUOY WITH ROPE The only life belt with a line that winds its own recess moulded on the belt ensuring that the line is always in place ready for an immediate and safe launching. The life belt yo yo is constituted from rigid high density polyethylene outer, shell of the thickness of millimeter 2.5, thick, toroid shaped, injected with polyurethane foam for buoyancy. There is a groove running aroud the external circumference of the life belt shell to hold the line conforming to S.O.L.A.S. regulations. Part No. 50124
S/S LIFE BUOY HOOKS
SAFETY LINE - 2 HOOK
Two non-magnetic stainless steel locking double action hooks. Fitted with overload indicator, tested and approved to EN 1095 meets AYF special regulation 5.02
304 Grade Stainless Steel Lifebuoy Hooks. Suits most Lifebuoys.
SAFBL2 2 Mtrs
SAFETY LINE - 3 HOOK
Length 178mm Width 19mm Sold Each Part No. 50223
CRUISER RIVIERA FIRST AID KIT
Supplied in Decor Plastic container. Cat C & G rated Part No. 50253
FIRST AID KITS
Three non-magnetic stainless steel locking double action hooks. Fitted with overload indicator, tested and approved to EN 1095 meets AYF special regulation 5.02 Part No.
SAFBL3 2 Mtrs
CHILD HARNESS 50249 Part No. 50249 50251
Scale F For survey: Class 1C - Unberthed Class 1D - Berthed Class 1E - Berthed Class 2C - Berthed Scale G For survey: Class 1D - Unberthed 2D, 2E, 3C, 3D & 3E
Made from high strength polyester webbing & sewn with heavy polyester thread, all buckles & safety hook are non-corroding and non-magnetic. Adjustable waistband & shoulder straps give plenty of adjustment for correct fit. Warning: to be used only on non-capsizing boats. Clip safety hook in the middle of boat so as to prevent child from falling overboard. Part No. CHI22S Small. Fits 3-6 Year Olds
Part No. SAFCR Multi Purpose Crutch Strap
Controls your boats movements and reduces wind drift in open water when resting, eating, fishing, riding out rough weather and keeps your boat in the area longer if waiting for rescue. Made from heavy nylon fabric, rigid wire hoop, brass eyelets and rope splice clips, 6mm synthetic laid rope, large nylon thimble attachment point and a retriever tag.
DVK GAS DETECTOR Suitable for gasoline/propane, butane etc. Features include bright LED indicators for “Wait”, “Safe” & “Danger” with audible alarm. Comes complete with 4m lead and a single sensor unit. Has dual capability by adding an optional second sensor and lead. Panel: 117mm x 75mm. Cutout: 95mm x 55mm.
Part No. SEA195H SEA196H SEA197H
Boat Length: 6mtrs Boat Length: 7mtrs Boat Length: 8mtrs
Size: 51cm(20”) Size: 64cm(25”) Size: 76cm(30”)
50501, 50502, 50510
THROW BAG 50503
The Throw Bag is an easy and efficient way of storing and throwing 15.2 meters of rescue rope. If your first attempt fails, simply fill the bag with water and try again.
Part No. THR152 50514
Part No. 50500 GA286 Gas Alarm/Detector 50514 GA286SU Gas detector specially designed to work with LPG solenoid valves (fitted). 50512 3 Watt solenoid valves 12v 50501 4m lead & sensor 50502 6m lead & sensor 50510 10m lead & sensor 50503 Sensor only
RETRIEVER FLOAT & BAG The retriever float is a flexible rescue float and lifting sling for short handed retrieval-rescue that complies to AYF requirements for flexible horse shoe floats. Features all round webbing design with 2 large S/S lifting rings, 45 meters of 8mm floating retrieval rope, stow bag with 3 large adjustable webbings and large external printed instructions.
Part No. RET225
ANCHOR MATE DEVICE Anchor Rope Securing Bracket for Aluminium Boats
Step 1 Step 2 Step 3
Thread loop in rope through anchor mate loop. Push anchor mate though loop and pull tight. Fit anchor mate over gunwale and anchor boat. Slide anchor mate into a position that stabilizes boat.
Part No. 21200 Anchor Mate Device
COLLAPSIBLE SEA ANCHORS Same uses as hoop style sea anchor but with the added feature of being able to store in its own bag in a smaller space simply collapsing the two diagonal support struts.
Part No. SEA194C SEA198C SEA199C
Boat Length: 6mtrs Boat Length: 7mtrs Boat Length: 8mtrs
Size: 405mm(16”) Size: 500mm(20”) Size: 610mm(24”)
SEA BRAKE DROGUE Seabrakes unique principle operates through the disbursement of waterflow to induce local turbulence creating a variable pressure wave which is activated by speed through the water. The greater the flow through the unit, the greater the drag effect. As the water is disbursed evenly through the 4 exhaust ports at the base of the Seabrake it tracks truly with no rotation, providing endless hours of tangle free operation and reliability.
Application Sea Anchor & drift anchor Emergency Steering Anti-surfing/broaching device Stabilizer under way Stabilizer/anti-roll anchor Aid for vessels under tow Aid for auto pilots Aid for bar crossing Spare man overboard harness Bosuns chair
Benefits * 11 applications for everyday use * Scientifically trialed & tested * Easy to operate and retrieve * Compact and easy to stow Part No. * Effective and thoroughly reliable SEAGP24 * Doesn’t rotate and is tangle free SEAGP30 * Has twice the drag of conventional sea anchors SEAGP48 * Provides controlled restraint and tracks reliably SEAGP60 * Reduces fatigue on both vessel and crew * An approved emergency steering device * An approved sea anchor (Solas) * The “Solution” for vessels under tow * Significantly reduces roll at anchor * Reduces Motion sickness by dampening pitch and roll * An effective drift anchor for breakdowns and drift fishing * Adds stability and, when streamed in following and quartering seas, will assist in maintaining a vessel’s heading * Will keep a vessel’s speed under control in a way similar to a cruise control on a motor vehicle
Complies with AYF Rules. Attaches to horse shoe float or dan buoy to reduce wind drift. The weighed flexible wire hoop springs open when removed from the pouch ready for use in an emergency. Made from nylon fabric with nylon attachment cord. Comes complete with storage pouch.
Part No. DRO150N Drogue
Part No. 50602 8 Litre Stainless Steel Bucket with “FIRE” marked on the side in white. 50604 8 Litre Highly Polished Stainless Steel Bucket.
Boat Size 10’ - 36’ 36’ - 55’ 55’ - 75’ 75’ - 96’
DAN BUOY Made from anodised aluminium and complying with AYF regulations and categories for racing yachts, these dan buoys have the facility of being able to be taken apart with a special screwed joining piece allowing easy storage on board. They come complete with a quick release holster and flag cover. The 3” diameter float aligns closely to backstays and will fit into transom tubes and is completely covered for protection from the suns ultra violet rays. Part No. DAN3 Dan Buoy DANFLAG Spare Flag
PERSONAL RES-Q-SAT E.P.I.R.B.
FIRE EXTINGUISHERS Ideal for the home, car, boat, caravan and workshop.
Part No. 50222 Flame Out stored pressure aerosol - 500g A B (E) DRY POWDER. “It’s so easy to use” Complies to AS/NZ 4353 standard. Working Pressure: 1000kpa @ 23 degrees Celsius 50220 1.0kg BE Powder Fire Extinguisher Complies to AS/NZ 1841.5 standard. Working Pressure: 1035kpa @ 23 degrees Celsius Still air fire test rating: 5B:E 50224 1.0kg ABE Powder Fire Extinguisher Complies to AS/NZ 1841.5 standard. Working Pressure: 1035kpa @ 23 degrees Celsius Still air fire test rating: 1A:10B:E 50229 2.3kg ABE Powder Fire Extinguisher Complies to AS/NZ 1841.5 standard. Working Pressure: 1035kpa @ 23 degrees Celsius Still air fire test rating: 2A:40B:E Hose Included 50228 4.5kg ABE Powder Fire Extinguisher Complies to AS/NZ 1841.5 standard. Working Pressure: 1345kpa @ 23 degrees Celsius Still air fire test rating: 3A:40B:E
FIRE FIGHTING PORT Manufactured in plastic. Supplied with instruction label. Mounted in the motor chamber. In case of fire, the ring allows to come in with the extinguisher without opening the bonnet engine. Part No. 50230
RADAR REFLECTORS Approved Radar Reflector complying with international EN-ISO8729/IMO International Standards RES.A384(X). Compulsory for Pleasure Marine Boats over 12 Meters. Manufactured in light alloy. Provided with head plastic protection. Folding model for easy storage when not required. Part No. 50585 50586
Standard Radar Reflector Enclosed Radar Reflector supplied with container & fastenings
This pocket size beacon transmits continuously on 121.5MHz and 243MHz for up to 4 days. Ideal for crew on deck and can be carried either in a pocket or hung around the neck, or as a second EPIRB in the life raft. Part No. 50217
RB6 406MHz E.P.I.R.B. with strobe The RB6 406 EPIRB represents the latest in EPIRB technology & is ideal for boaters who operate more than 2 nautical miles offshore. It can be stowed on board the vessel &/or stowed in the emergency kit or in life rafts. The RB6 transmits on the 406 MHz frequencies. This technology has been responsible for many rapid rescues. The in-built strobe light is an added feature that helps rescuers to home in on people in distress. Features * Raises alarm in an emergency through COSPAS-SARSAT satellites * In-built strobe * Improved location accuracy * 48 hours minimum transmit time * 5 year replaceable lithium battery
Part No. 50115 Must be registered by owners with AMSA
ECHO POWER T 114 TUBULAR RADAR REFLECTOR Approved Radar Reflector complying with international EN-ISO8727/IMO International Standards RES.A384(X). Compulsory for Pleasure Marine Boats over 12 Metres. Effective to at least 5 sea miles. Manufactured in aluminium and plastic material.
Part No. 50587
BAILING SCOOPS Part No. 50008 Large yellow plastic 52710 Small clear plastic
Part No. 46060
Quality, fully marked leadline 25 Fathom line 7lb Weight
TREM LIFELINE NETTING Made from strong diamond mesh, salt water resistant fibre. The netting can be extended from 200mm to 600mm high & so the length reduces accordingly. Part No. 50091 100metres 50090 30 meters
Part No. 46059 PP Multifilament Braided rope. Depth marking at every 3 mtrs with ribbon. 25 Fathom line 3.2kg Weight
BLACK SHAPES Part No. 50241 Black Ball Shape Plastic 350mm 50242 Black Cone Shape Plastic 460mm x 330mm
Regulation Size Orange PVC sheet with large Black V. Four corner eyelets complete with rope lanyards. Supplied in Plastic Pouch.
LINE THROWING ROCKET Ideal for establishing line connections in sea distress cases Easy to operate and ready to fire in short time. Ignition by striking pin. Throwing range 250 mtrs. Part No. 50211
Part No. 50236
CYALUME STICKS - In Sealed Pack
Waterproof, non-toxic, non-flammable and windproof. These light sticks activate by simply bending the stick to create a chemical reaction and give a bright, glowing light source for approx. 12 hours. Ideal for emergency Nav lights, safety applications & general lighting. Part No. 50198G 50198R 50198Y 50198O
Green Light Red Light Yellow Light Orange Light
Part No. 50200 Red Parachute Flare SOLAS Approved 50202 White Parachute Flare (Illumination) 50206 Orange Smoke Hand Held Flare 50204 Red Hand Flare 50207 Regulation Pack - 2 Red, 2 Orange 50210 Bright White Hand Held Flare (Daytime) 50208 Buoyant Orange Smoke Flare 50214 Man Overboard Light Smoke Signal
SEAMARK VIVID GREEN DYE Scatter seamark contents on the water. It will spread out creating a large spotting mark. Visible for up to 1 hour. Part No. 50212
FLARE CONTAINERS Large size rigid plastic container in orange saftey colour complete with rope handle. Large enough to hold parachute rockets and offshore flare kits - up to 12 flares. Ideal for safely stowing many other saftey items all in the one container on board.
Part No. 50246
Dimensions 360mm x 235mm & 140mm ID top opening
FLARE CONTAINERS Suitable for holding up to 6 standard size flares. Water tight with ‘O’ ring seal & easy grip lid & handle. Part No. 50245 Flare Container - PWS
FIRE BLANKET Made from Woven Glass Fibre to quickly cover and extinguish a small fire without the use of a fire extinguisher. Part No. 50275
1mtr x 1mtr
REFLECTIVE TAPE Port and Starboard Reflective Tape. Retail Packaged with Barcode & Header Card. 50118, 50120 Part No. 50107 50107 Port and Starboard Reflective Tape. 1 Red & 1 Green Strip of Reflective Tape x 100mm (4”) 50111 Red Reflective Tape 50mm x 45mtr Roll 50112 Green Reflective Tape 50mm x 45mtr Roll 50109 Red Reflective Tape - 50mm x 9mtr Roll 50110 Green Reflective Tape - 50mm x 9mtr Roll 50108 White Reflective Tape - Fully Approved - 50mm x 45mtr Roll 50118 3M Retro-Reflective Tape. Fully Approved 50mtr Roll 50120 3M Retro-Reflective Tape. Fully Approved 10mtr Roll
XENON STROBE NET WHITE / RED FLASH LIGHTS Part No. 50276 1 Cell Strobe Net Light Fitted with a dusk to dawn switch the single “D” cell battery’s life is approximately 20 nights. This strobe light flashes every 1.5 seconds. It is visible up to 6km and waterproof to 30m. Weight is 120grams. Overall dimensions are 146mm x 50mm. 50277 Double Cell Strobe Net Light
Fitted with a dusk to dawn switch the double “D” cell battery’s life is approximately 23 nights. This strobe light flashes every 1.5 seconds. It is visible up to 6km and waterproof to 30m. Weight is 250grams. Overall dimensions are 270mm x 53mm.
FISHING NET INDICATING LIGHTS Lightweight, easy to install, simple to operate.
ACOUSTIC HORN Hand held and operated air horn. Enviromentally friendly cannister does not contain any harmful gas. Refills and plastic bracket also available. Part No. 50003 Complete horn & canister set 50004 250ml Canister gas refill 50005 Plastic Bracket for horn
TWO CELL WATERPROOF TORCH Part No. 50116 Two Cell Waterproof Rubber Torch with Signal Button
MINI AIR HORN
Visibilty - 4km Battery Aklaline ‘D’ cell- 1.5V x 2 Flash Rate - 1” Waterproof - 50m Size: 188mm x 52mm, 80grams Part No. 50279
SOLAS LIFEBUOY LIGHT Optimal light diffusion by means of milky domes. Automatic activation after releasing. Features Position marking of a lifebuoy. Safe on oil or petrol covered water. Possibility of constant light function control. Connection with lifebuoy by means of the attached 2.5m polyamid line Conforming to SOLAS 74/88 Burning time of 2 hours Part No. 50125 Lifebuoy light 50225 Bracket for lifebuoy light
Hand held pressure pack horn giving a loud blast. Only 125mm x 44mm, small enough to keep in a hand bag to use as a personal safety device. 50ml cannister with red plastic horn top. Part No. 50006
AUTO ROCKET LIGHTS
Complete horn & canister set
PLASTIC FOG HORN Portable Mouth operated fog horn with rope lanyard. Part No. 50750
Part No. 50268 50270
Includes daylight switch - flashing 3-4 seconds for long life battery life - double o’ring for water proofing - takes 2 D-Cell Batteries. Spare Bulbs to Suit above Rocket Lights
MINI FLASHLIGHT This superb mini flashlight clips on and swivels to any position. Perfect for Fishing or if the fish are not biting use it to read your map, or make up some new rigs. If hiking is your thing this is ideal as it weighs only 18gm. Use it as an emergency light when the unfortunate happens, keeping two hands free to fix the problem. The LED is bright & magnified, is low voltage for battery longevity.
FLOATING LIFEBUOY LIGHT & HOLDER Solas Approved Continuous Light for Commercial vessels. Approved by Marine Boards in Australia for use on commercial craft. Strongly constructed in plastic & operated by 4 round 1.5 volt batteries. White and brilliant light with a capacity of 3 candelas
Part No. 50580 Floating Lifebuoy Light 50582 Lifebuoy Light Holder 316G Stainless Steel Supplied with Clamp for attaching to 7/8” & 1” Rails to suit 50580 lifebuoy light
Part No. 50282 Complete with battery in blister display pack. 50284 Spare Battery pack T/S 50282 Mini Light
MAST LED TORCHES
GT-1Watt Power Led
Features 7 super bright LED’s Pocket size Low power consumption 3 x AAA batteries Housing made on a waterproof base Life time over 50.000 hours
Features One 1Watt power LED Pocket size Low power consumption 2 x CR123A batteries Housing made on a waterproof base Adjustable lens for beam angle Life time over 50.000 hours
Part No. 50128
World Class Products
Part No. 50130
GT-3Watt Power Led
Features 11 super bright LED’s Pocket size Low power consumption 3 x AAA batteries Housing made on a waterproof base Life time over 50.000 hours
Features One 3Watt power LED Pocket size Low power consumption 2 x CR123A batteries Housing made on a waterproof base Adjustable lens for beam angle Life time over 50.000 hours
Part No. 50129
World Class Products
Part No. 50131
World Class Products
World Class Products
PALM GRIP PADDLE
One piece Anodised Aluminium Paddle with Palm Grip. Black 4 ft Blade Part No. 44114
TIMBER OARS - ‘GULL’ Oars are made from the finest quality Tasman Fir. They are finely sanded and grain sealed before varnishing. They are strong, robust and durable. Sold only in pairs. Part No. 44107 44108 44109 44110 44111 44112 44113
5’6" 6' 6’6" 7' 7’6" 8' 8' 6"
Part No. 44118 4ft Heavy Duty Black Bladed Alloy Paddle with T-Grip 44119 5ft - same as above 44117 7ft - Double offset blade paddle
TELESCOPIC DEMOUNTABLE PADDLE Grey Bladed Anodised Aluminium Paddle with telescopic handle.
RUBBER OAR TIPS Part No. 44102 Rubber Oar Tips 5” sold in pairs.
OARS STOPS Part No. 44099 1 5/8" Solid rubber oar stops with lugs, sold in pairs. 44100 1 3/4" Solid rubber oar stops with lugs, sold in pairs. 44098 43mm black nylon oar stops.
GALVANISED RING ROWLOCKS Part No. 44090 3/8" Galvanised Ring Rowlocks Sold in pairs. 44091 7/16" Galvanised Ring Rowlocks Sold in pairs.
Tube diameter 35mm. Handle extends from 60cm to 160cm. Part No. 39170
OAR PADDLE HOOK Manufactured in black nylon. Two screw fastening. Part No. 35918B 35919 35921 35923
T/S Tube 20mm 20 - 25mm 30 - 35mm 40 - 45mm
VULTAIL HEAVY DUTY PIPE CLIPS Part No. 45500 45501 45502 45503 45504 45505 45506
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 3"
NYLON RING ROWLOCK GALVANISED OPEN ROWLOCKS Part No. 44092 3/8" Galvanised Open Rowlocks Sold in pairs. 44093 7/16" Galvanised Open Rowlocks Sold in pairs.
Nylon Ring Rowlock with Flush Mount Plates. Complete with tether to prevent loss of rowlock overboard, allows rowlock to be removed from mounting plates while attached.
Part No. 44094
NYLON BOAT HOOK HEAD
TREM DELUXE TELESCOPIC BOAT HOOK
Black molded nylon boat hook head that fits externally over tube or timber dowel. Part No. 50908 50910
To fit pipe size 25mm To fit pipe size 30mm
Manufactured in ribbed aluminium pipe with grey plastic head and large hand grip. Extends to 2.5 metres Part No. 50916
ECONOMY TELESCOPIC BOAT HOOK LARGE SKI MIRROR Large Universal Mount Ski Mirror. Polished with strong plastic frame.
Injected molded Nylon/Aluminium 1.25m extending to 1.95m.
300mm x 100mm rectangular shape. Part No. 70601
Part No. 50918
WOODEN & CHROME BOAT HOOK Boat Hook with wooden handle and chrome hook.
Part No. Handle Diameter 35mm 50900 50902 35mm
Length 150cm 200cm
CP BRASS BOAT HOOK HEAD Chrome plated brass boat hook head that fits externally over 28mm tube or timber dowel. Part No. 50906
SIGNAL MIRROR Signalling Mirror in accordance with International Regulations. Made in special unbreakable plastic, non corrosive and higly reflective. Part No. 50752
STAINLESS STEEL SIGNAL MIRRORS
Part No. 50238 Stainless Steel Signal Mirror SM125 Sailmaster S/S Mirror
Published on Oct 16, 2010
The scheme shall read d tire a cold that. Speaking insignificant to unpacked moderate debate learning. A special contrast his excelle winter...