Page 7

GPS Accessories CORS, Co-op CORS and private GPS network reference stations are being put together all over. To make the set up simpler SECO now manufactures CORS monument adapters that fit easily to threaded pipe or mount to masonry. There’s no need to fabricate adapters — we have a professional solution that is simple and will provide years of stability and accuracy. Choose between anodized aluminum or stainless steel, pipe-fit or masonry mount.

Adjustable-Tilt, Stainless Steel Monument Adapters #2072-30 — use with 1.5-inch pipe with MPT 1-1/2 x 11-1/2 TPI — Weighs 5.5 lb (2.5 kg) #2072-31 — use with 2-inch pipe with MPT 2 x 11-1/2 TPI — Weighs 6.6 lb (3 kg) #2072-32 — use with 3-inch pipe with MPT 3-1/2 x 8 TPI — Weighs 6.9 lb (3.1 kg) #2072-33 — use with male 5/8 x 11 TPI — Weighs 6.2 lb (2.8 kg)

Like the adapters below, these Adjustable-Tilt Monument Adapters are a perfect, professional solution to fit between your GPS antenna and the mast of your network monument. The adapters in the #2072-Series have 3.20-inch (8.19 cm) diameters and overall heights of 3.036 inches (7.71 cm). They include a removable brass 5/8 x 11 male stud that is adjustable in azimuth and held in location by two set screws. The adapters are leveled by three adjusting screws with a tilt range +/- 7 degrees. The height above the pivot point to the stud shoulder is 1.37 inches (3.50 cm). The height below the brass 5/8 stud to the shoulder is 0.463 inches (1.18 cm). The axis height is engraved on the outside of the monuments.

40-Minute Leveling Vial #2072-050

This durable all-aluminum vial features 5/8 x 11 threads. Leveling a monument adapter is simple: attach, level, rotate 180° to check calibration. Weighs 0.3 lb (0.14 kg)

Stainless Steel Pipe Thread Masonry Adapter

Antenna Mast Adapter

This adapter permanently connects a GPS antenna mount to a concrete (or masonry) structure. The pipe threads measure 1.5 inch x 11.5 inch NPT. The overall height of the unit is 7 inches, including the 3.5 inch length of pipe. Weighs 1.80 lb (0.82 kg)

Use the adapter for network GPS antenna mounts.

#2072-50

Masonry Mount Adapter #2072-20

Use for network antenna mounts. Easy to install, just drill three, 5/8inch holes and fill with epoxy. The brass rotating adapter is removable and locks in the azimuth direction. The body is made of anodized aluminum with stainless steel 3/8 x 2.5-inch bolts.

#2072-10

It’s easy to install, it attaches to standard 2-inch threaded pipe used as the ‘mast’. Ideal for use with #2072-30 (shown attached). Sold separately.

The brass rotating adapter is removable and locks in the azimuth direction. The body is made of anodized aluminum. Weighs 2.0 lb (0.91 kg)

Weighs 1.4 lb (0.61 kg)

Contact us today for all your equipment needs!

7

Seco 2012 Catalog  
Seco 2012 Catalog  

Seco 2012 Catalog

Advertisement