Page 59

Cut and Fill Rods One Shot Cut and Fill Rod While leveling rods are great for cut and fill applications with large changes in elevation, they require math to calculate the cut or fill measurement. This introduces a large potential for error. Worse yet, most of the time, if the math is wrong, it is off by two times the correct measurement.

One Shot Rod telescopes out to taller heights

The cut or fill measurement on the Crain One Shot® is read directly on the rod. The correct measurement is virtually guaranteed — saving you time and money. The durable construction of the One Shot means no brittle or easily breakable tapes or parts.

Instructions: Locking on line permits direct reading of cut or fill - no math!

Some typical uses include: grading, masonry, site work, forms, landscaping, foundations, sewers, drainage, and slab work. Includes carrying case. Number: 94001 94002 94003 94021 94022 94023 94041 94042 94043

Length: 8 ft 8 ft 2.4 m 13 ft 13 ft 4.0 m 16 ft 16 ft 5.0 m

Graduations: 10ths inches E metric 10ths inches E metric 10ths inches E metric

Weight: 4 lb (1.81 kg) 4 lb (1.81 kg) 4 lb (1.81 kg) 5 lb (2.26 kg) 5 lb (2.26 kg) 5 lb (2.26 kg) 7 lb (3.17 kg) 7 lb (3.17 kg) 7 lb (3.17 kg)

Adjust and securely lock One Shot on target elevation.

One Shot Carrying Case

#91422 — 8 ft (2.4 m) — Measures: 4.25 x 43 inches (10.8 x 109.2 cm) #91423 — 13 ft (4.0 m) — Measures: 4.25 x 59 inches (10.8 x 149.9 cm)

This case is made from quality 1000-denier nylon and is water-resistant.

Direct read grades on the scale.

Lightweight Cut and Fill Rods

#7310-10 — Centimeter and Millimeter Graduations (shown) #7310-11 — Inches and Eighths Graduations #7310-12 — Tenths and Hundredths

Sliding Detector Bracket works with all laser receivers (sold separately) and their standard rod clamps

These lightweight aluminum Cut and Fill rods make finish grading easy. The red section is a ‘Cut’ value from grade with a range of 1 ft 7 in (0.48 m). The clear lower section is a ‘Fill’ value from grade with a range of 2 ft 2 in (0.66 m). The rods collapse to 2 ft 8 in (0.81 m) and extend to 6 ft 2 in (1.88 m). End to end the collapsed length is 4 ft 3.50 in (1.31 m). These feature a graduated telescoping bottom section that locks in place with a durable metal clamp screw. The rods also feature a builtin circular vial. The sliding laser receiver bracket works with all laser receivers using standard rod clamps. Weighs 1.30 lb (0.59 kg)

Cut Section

Fill Section

Durable metal clamp screw and built-in circular leveling vial Demo video available at www.surveying.com

Contact us today for all your equipment needs!

59

Seco 2012 Catalog  
Seco 2012 Catalog  

Seco 2012 Catalog

Advertisement