Against pressure water or short-time strain by pressure water To join the GEOEMBALSES geomembrane to a concrete construction, it is possible to use a plate
that is anchored in the concrete by screws and anchoring dowels. Distance of separate screws depends on a solidity of the ledge and on the type of anchoring.
Anchoring of the geomembrane to concrete by a stainless steel ledge
Distance of screws depends on a solidity of an anchoring ledge, or of an anchoring profile (for steel amchoring plate 10 mm thick the distance should not be bigger than 150 mm). It is also possible to anchor the GEOEMBALSES
geomembrane to concrete by a PEHD anchoring element. This anchoring element is installed already during concreting itself and the GEOEMBALSES geomembrane is anchored to it by an extrusion weld.
Anchoring of the geomembrane with a HDPE anchoring element
16