ABS Modules And The Reason Why They Are Valuable ABS is short for Ă˘â‚ŹĹ“Anti-lock Braking System." The car is controlled by pumping pressure into the braking system, preventing the brakes from locking up permitting you to stop the vehicle appropriately. It is vital that your ABS module is fully functional, particularly in emergency brake situations, because it ensures that your brakes respond in the event you need to stop suddenly and allows you to steer while braking. Repair must be immediate anytime the ABS light turns on alerting you to a problem with the braking mechanism. While your motor vehicle is still drivable and there are back up systems in place, you should never drive a vehicle for an extended length of time if the ABS light is on. There are four key components to the ABS system that must be functional in order to ensure your safety while driving: speed sensors, valves, a pump, as well as a controller. Speed sensors are located in the hub of the wheel and keep track of the rotation of each tire in order to make sure that each wheel is turning properly and in sync with the other three. To ensure you do not lose control of the vehicle at any time, when a variation between the wheels is observed, the ABS system will engage. The value system becomes employed when there is an issue. Each brake controlled by the break component has a valve inside the brake line. Valves accomplish three things. Pressure from the master cylinder will be able to pass freely through the brake lines once the values are open. When the value is closed, the lines are blocked, cutting off the brake from the master cylinder therefore preventing pressure from rising further if the driver perhaps activates the brakes. Some of the pressure is let off once the value releases, and the valve would then resume the open position. When the valve releases pressure in the brake lines the pump is there to return pressure and resume the routine. The ABS module controller is actually a computer that monitors each one of these components and triggering them at the appropriate times. By monitoring the speed sensors, it will be able to detect rapid decelerations in the wheels that frequently occur before wheels lock up. A wheel that locks up can stop spinning in less than a second when you touch on the brakes to slow the automobile as it decelerates, so the controller would be crucial in being able to maintain control. The controller is programmed to stop this because such quick deceleration would be impossible, so it sends the signal to reduce the pressure to that wheel so that it is able to accelerate and then signals the pumps to reapply pressure to be able to safely slow down the car. In order to ensure safe driving it is crucial that your break module is proper working condition. Often times if the front ABS system stops working the module will keep the rear wheel break system functioning in order to make the vehicle safe enough to drive until you can repair the system. It can easily be repaired even though there are lots of things that can go wrong with an ABS unit. When your ABS light turns on you should get it fixed or replaced as quickly as possible. If you want to purchase a new ABS module there are many places that will install them for you, or you can order a new module online and install it yourself. Reset the crash codes within your car's computer with an ABS module repair. For even more info on MyAirbags, view them at the website, http://www.myairbags.com/.
ABS Modules And The Reason Why They Are Valuable
Document Tags: abs module replacement, abs module, abs module repair http://www.myairbags.com/