Issuu on Google+

Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Tag:

SS01

Item:

Sofa, bridge table

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at center * Flush mounted duplex power receptacle at center of table, retractable cover * Power unit to have two receptacles that are individually fused * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH12 Edelman Leather Woven Leather WVNC007 Custom Burnt Orange Color with Crypton finish (European full grain vegetable tanned aniline dyed cowhide with embossed woven pattern) Bolster Upholstery: UPH10 Edelman Leather Royal Hide RH52 Paleface with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only.

Back cushion to be similar to this image

Location:

UPH12 UPH10 Refer to Furniture Layout Plans

WD2

Page 1 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS02

Item:

Sofa, chaise

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, table lamp, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at end with 1200mm high table lamp * 13mm square solid brass lamp post on 175mm square x 50mm high brass base * Lamp base with one power receptacle and one communication port, grounded * Lamp base attached to table platform with brass extended pipe kit * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic * Two horizontal candelabra lamp sockets at center point of lamp shade height * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH12 Edelman Leather Woven Leather WVNC007 Custom Burnt Orange Color with Crypton finish Bolster Upholstery: UPH10 Edelman Leather Royal Hide RH52 Paleface with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only. UPH12

UPH10

Location:

Refer to Furniture Layout Plans

Page 2 of 27 / T0

WD2

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS03

Item:

Sofa, one arm

Performance Specifications:

Dimensions:

Finishes:

Image:

Two seat, one arm fully upholstered sofa * Fully upholstered sofa with one 230mm wide upholstered arm rest * Fixed back and seat cushions * High density CFC-free polyurethane foam with polyester padding * Aluminum legs with leveling glides Overall: 1460mm W x 865mm D x 775mm H Seat: 1230mm W x 570mm D x 420mm H Upholstery: UPH26 Designtex Incognito Pearl 2379-502 Frost (100% Polymeric polyester with polyester knit backing) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH26

Location:

Refer to Furniture Layout Plans

Page 3 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS04

Item:

Lounge Chair, wood shell

Performance Specifications:

Dimensions:

Finishes:

Image:

Upholstered lounge chair with exposed exterior wood shell * 50mm thick maple veneer wood panel exterior shell and stringer * Upholstered fixed back and seat interior cushions * 130mm diameter contrasting fabric bolster pillows each side, attached * Rectilinear steel base structure with rectangular steel risers, chrome finish * Interior hardwood structure, glued and double dowelled, wood screws * Interlaced webbing back and seat foundation * High resilient CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 860mm W x 760mm D x 780mm H Seat: 495mm W x 500mm D x 445mm H Arms: 610mm H Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain anilene dyed cowhide) Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe (92% wool, 8% nylon) Or Approved Equals Wood: WD1 Wood finish to match Interiors WD1 Base: FIN5 Satin Chrome Indicative of required aesthetic only.

UPH9

UPH3

WD1 Location:

Refer to Furniture Layout Plans

Page 4 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS05

Item:

Sofa, two seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Upholstered lounge sofa with exposed exterior wood shell * 50mm thick maple veneer wood panel exterior shell and stringer * Upholstered fixed back and seat interior cushions * 130mm diameter contrasting fabric bolster pillows each side, attached * Rectilinear steel base structure with rectangular steel risers, chrome finish * Interior hardwood structure, glued and double dowelled, wood screws * Interlaced webbing back and seat foundation * High resilient CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 1660mm W x 760mm D x 780mm H Seat: 1295mm W x 500mm D x 445mm H Arms: 610mm H Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain anilene dyed cowhide) Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe (92% wool, 8% nylon) Or Approved Equals Wood: WD1 Wood finish to match Interiors WD1 Base: FIN5 Satin Chrome Indicative of required aesthetic only.

UPH9

UPH3

WD1 Location:

Refer to Furniture Layout Plans

Page 5 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS06

Item:

Sofa, three seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Upholstered lounge sofa with exposed exterior wood shell * 50mm thick maple veneer wood panel exterior shell and stringer * Upholstered fixed back and seat interior cushions * 130mm diameter contrasting fabric bolster pillows each side, attached * Rectilinear steel base structure with rectangular steel risers, chrome finish * Interior hardwood structure, glued and double dowelled, wood screws * Interlaced webbing back and seat foundation * High resilient CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 1840mm W x 760mm D x 780mm H Seat: 1525mm W x 500mm D x 445mm H Arms: 610mm H Overall Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain anilene dyed cowhide) Bolster Upholstery: UPH3 Maharam Stripes 463980-002 Modulating Stripe (92% wool, 8% nylon) Or Approved Equals Wood: WD1 Wood finish to match Interiors WD1 Base: FIN5 Satin Chrome Indicative of required aesthetic only.

UPH9

UPH3

WD1 Location:

Refer to Furniture Layout Plans

Page 6 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS07

Item:

Sofa, three seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered sofa with metal base * Attached seat cushions and loose back cushions * High resilience CFC-free polyurethane foam cushion with polyester padding * Nickel plated flat bar steel legs and stringers * Floor glides. Overall: 2415mm W x 850mm D x 760mm H Seat: 445mm H Arms: 670mm H Upholstery: UPH4 Architex Bark Olive (81% Recycled polyester, 10% polyester, 9% Rayon) Or Approved Equal Base: FIN5 Brushed Nickel Indicative of required aesthetic only.

UPH4

Location:

Refer to Furniture Layout Plans

Page 7 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS08

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge chair with metal frame, arms * Upholstered seat and back * Exposed tubular metal frame, metallic powdercoat finish * High density CFC-free polyurethane foam cushions * Four legs * Floor glides Overall: 660mm W x 760mm D x 775mm H Seat: 585mm W x 495mm D x 445mm H Arms: 585mm H Upholstery: UPH6 Bernhardt Textiles Sheridan 3329-011 Ice (52% Cotton, 21% Acetate, 14% Nylon, 13% Viscose, Teflon finish) Or Approved Equal Frame: FIN5 Satin Pewter

Indicative of required aesthetic only.

UPH6

Location:

Refer to BOQ for quantity

Page 8 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS09

Item:

Sofa, three seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge sofa with metal frame, arms * Upholstered seat and back * Exposed tubular metal frame, metallic powdercoat finish * High density CFC-free polyurethane foam cushions * Four legs * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 1880mm W x 760mm D x 775mm H Seat: 1790mm W x 495mm D x 445mm H Arms: 585mm H Upholstery: UPH10 Edelman Royal Hide RH52 Paleface with Crypton (European full grain aniline dyed cowhide) Or Approved Equal Frame: FIN5 Satin Pewter Indicative of required aesthetic only.

UPH10

Location:

Refer to BOQ for quantity

Page 9 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS11

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Classic lounge chair with exposed frame * Steel bar welded frame, chrome finish * Laminated leather strap back and seat supports, black * Back and seat cushions composed of individual leather panels, hand welted and hand tufted from a single leather hide, matching buttons * CFC-free polyurethane foam cushions * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 750mm W x 760mm D x 770mm H Seat: 430mm H Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equal Frame: FIN1 Polished chrome Indicative of required aesthetic only.

UPH16

Location:

Refer to Furniture Layout Plans

Page 10 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS12

Item:

Sofa, bridge table

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at center * Flush mounted duplex power receptacle at center of table, retractable cover * Power unit to have two receptacles that are individually fused * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH14 Edelman Leather Napoli NC7495 Custom Green with Crypton finish (European full grain aniline dyed cowhide) Bolster Upholstery: UPH15 Edelman Leather Dream Cow DRC24 Fresh Snow with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only.

Back cushion to be similar to this image

Location:

UPH14 UPH15 Refer to Furniture Layout Plans

WD2

Page 11 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS13

Item:

Sofa, chaise

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, table lamp, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at end with 1200mm high table lamp * 13mm square solid brass lamp post on 175mm square x 50mm high brass base * Lamp base with one power receptacle and one communication port, grounded * Lamp base attached to table platform with brass extended pipe kit * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic * Two horizontal candelabra lamp sockets at center point of lamp shade height * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH14 Edelman Leather Napoli NC7495 Custom Green with Crypton finish (European full grain aniline dyed cowhide) Bolster Upholstery: UPH15 Edelman Leather Dream Cow DRC24 Fresh Snow with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only. UPH14

UPH15

Location:

Refer to Furniture Layout Plans

Page 12 of 27 / T0

WD2

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS14

Item:

Bench

Performance Specifications:

Dimensions: Finishes:

Image:

Contoured bench with accent upholstery on vertical side and end surfaces * Internal steel frame * Steel bar sled base legs, chrome finish * High density CFC-free polyurethane foam with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 3350mm L x 710mm W x 380-510mm H Top Surface Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Sides and Ends Vertical Surfaces Upholstery: UPH17 Edelman Leather Real Woven RW02 Black (European full grain aniline dyed calfskin, fabric back) Or Approved Equals Base: FIN5 Satin Chrome Indicative of required aesthetic only.

UPH16

Location:

UPH17

Refer to Furniture Layout Plans

Page 13 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS15

Item:

Bench

Performance Specifications:

Dimensions: Finishes:

Image:

Upholstered bench with wood platform and metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat cushions * CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 2515mm W x 840mm D x 460mm H Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only.

UPH16

WD2 Location:

Refer to Furniture Layout Plans

Page 14 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS17

Item:

Sofa, bridge table

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at center * Flush mounted duplex power receptacle at center of table, retractable cover * Power unit to have two receptacles that are individually fused * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster with Crypton finish (European full grain vegetable tanned aniline dyed calfskin) Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only.

Back cushion to be similar to this image

Location:

UPH18 UPH16 Refer to Furniture Layout Plans

Page 15 of 27 / T0

WD2

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS18

Item:

Sofa, chaise

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with integral table, table lamp, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * 510mm wide exposed wood platform table at end with 1200mm high table lamp * 13mm square solid brass lamp post on 175mm square x 50mm high brass base * Lamp base with one power receptacle and one communication port, grounded * Lamp base attached to table platform with brass extended pipe kit * Power unit to have 1800mm long cord below table with plug end to reach floor box, provide low profile cable management full length under seating unit * 240mm diameter x 355mm high cylinder lamp shade, white sandblasted acrylic * Two horizontal candelabra lamp sockets at center point of lamp shade height * Electrical components to be compatible with Doha Qatar utilities * Leather upholstery to have grease and stain resistant applied finish * Floor glides Overall: 2515mm W x 840mm D x 850mm H Seat: 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster with Crypton finish (European full grain vegetable tanned aniline dyed calfskin) Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only. UPH18

UPH16

Location:

Refer to Furniture Layout Plans

Page 16 of 27 / T0

WD2

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS21

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Upholstered arm chair with exposed wood panel surround * Fixed upholstered seat, back and arm cushions * Maple veneer outer side and back panels * Solid maple legs and rails * Solid hardwood double doweled construction and corner blocked legs and rails * 100mm thick multi-density CFC-free polyurethane foam wrapped in polyester padding * Seat support is stretched webbing on hardwood plywood frame * Catalyzed lacquer finish * Nylon floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 790mm W x 815mm D x 740mm H Seat: 635mm W x 460mm H Upholstery: UPH19 Edelman Leather Metallic Dream Cow MDC06 Milky Way with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equal Wood: WD2 Wood finish to match Interiors WD2 Indicative of required aesthetic only.

UPH19 Location:

WD2

Refer to Furniture Layout Plans

Page 17 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS22

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered arm chair with metal base * Attached seat cushions and loose back cushions * High density CFC-free polyurethane foam cushion with polyester padding. * Nickel plated flat bar steel legs and stringers * Floor glides. Overall: 900mm W x 825mm D x 760mm H Seat: 445mm H Upholstery: UPH4 Architex Bark Olive (81% Recycled polyester, 10% polyester, 9% Rayon) Or Approved Equal Base: FIN5 Brushed Nickel Indicative of required aesthetic only.

UPH4

Location:

Refer to Furniture Layout Plans

Page 18 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS28

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered lounge chair with metal legs * Fixed tight seat and back cushions * Upholstered arm panels * CFC-free polyurethane foam * Aluminum legs with floor glides Overall: 675mm W x 710mm D x 760mm H Seat: 560mm W x 510mm D x 430mm H Arms: 560mm H Upholstery: UPH28 Architex Bark Katahdin (81% Recycled polyester, 10% polyester, 9% Rayon) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH28

Location:

Refer to Furniture Layout Plans

Page 19 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS29

Item:

Sofa, two seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered two seat sofa with metal legs * Fixed tight seat and back cushions * Upholstered arm panels * CFC-free polyurethane foam * Aluminum legs with floor glides Overall: 1335mm W x 710mm D x 760mm H Seat: 1220mm W x 510mm D x 430mm H Arms: 560mm H Upholstery: UPH27 Anzea Space Cow 7231-35 Black Hole (100% Polyurethane with Pollex Knit backing) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH27 Location:

Refer to Furniture Layout Plans

Page 20 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS30

Item:

Sofa, three seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered three seat sofa with metal legs * Fixed tight seat and back cushions * Upholstered arm panels * CFC-free polyurethane foam * Aluminum legs with floor glides Overall: 1830mm W x 710mm D x 760mm H Seat: 1715mm W x 510mm D x 430mm H Arms: 560mm H Upholstery: UPH27 Anzea Space Cow 7231-35 Black Hole (100% Polyurethane with Pollex Knit backing) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH27 Location:

Refer to Furniture Layout Plans

Page 21 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS31

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered lounge chair with metal legs * Fixed tight seat and back cushions * Upholstered arm panels * CFC-free polyurethane foam * Aluminum legs with floor glides Overall: 675mm W x 710mm D x 760mm H Seat: 560mm W x 510mm D x 430mm H Arms: 560mm H Upholstery: UPH21 Brentano Fabrics Eco Stripe 7110-03 Landslide (100% Wool) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH21

Location:

Refer to Furniture Layout Plans

Page 22 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS36

Item:

Sofa, upholstered shell

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with wood platform, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 2515mm W x 840mm D x 850mm H Seat: 2260mm W x 520mm D x 460mm H Arms: 710mm H Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster with Crypton finish (European full grain vegetable tanned aniline dyed calfskin) Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only. UPH18

UPH16

WD2 Location:

Refer to Furniture Layout Plans

Page 23 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS37

Item:

Lounge Chair, upholstered shell

Performance Specifications:

Dimensions:

Finishes:

Image:

Lounge seating unit with wood platform, metal base * 100mm high maple veneer wood platform, full width and depth * 200mm high .375mm thick steel bar base frame and legs, chrome finish * 30mm high steel rod risers between wood platform and base, chrome finish * 150mm thick fixed seat and arm cushions * 390mm high double layer fixed back cushions * 130mm diameter contrasting fabric bolster pillows each end, attached * CFC-free polyurethane foam cushions with polyester padding * Floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 840mm W x 840mm D x 850mm H Seat: 585mm W x 520mm D x 445mm H Arms: 700mm H Overall Upholstery: UPH18 Edelman Leather Russian Modernaya RM01 Alabaster with Crypton finish (European full grain vegetable tanned aniline dyed calfskin) Bolster Upholstery: UPH16 Edelman Leather Napoli AA06SH Custom Black with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equals Wood: WD2 Wood finish to match Interiors WD2 Base: FIN1 Polished Chrome Indicative of required aesthetic only. UPH18

UPH16

WD2 Location:

Refer to Furniture Layout Plans

Page 24 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS38

Item:

Lounge Chair, with ottoman

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered lounge chair and ottoman with sled base * Fixed seat cushion and tight back * Upholstered arm panels * CFC-free polyurethane foam * Steel bar slad base legs with floor glides * Leather upholstery to have grease and stain resistant applied finish Overall: 730mm W x 820mm D x 780mm H Seat: 450mm H Ottoman: 510mm W x 510mm D x 450mm H Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equal Legs: FIN5 Brushed Aluminum Indicative of required aesthetic only.

UPH9

Location:

Refer to Furniture Layout Plans

Page 25 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS39

Item:

Sofa, three seat

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered sofa with metal base * Attached seat cushions and loose back cushions * High density CFC-free polyurethane foam cushion with polyester padding. * Nickel plated flat bar steel legs and stringers * Floor glides. * Leather upholstery to have grease and stain resistant applied finish Overall: 2415mm W x 850mm D x 760mm H Seat: 445mm H Arms: 670mm H Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equal Base: FIN5 Brushed Nickel Indicative of required aesthetic only.

UPH9

Location:

Refer to Furniture Layout Plans

Page 26 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


Furniture and Equipment Specifications EC BP4A(EB)-3 - Convention Centre Extension Qatar Foundation Education City

Furniture Specification Sheet Furniture Specification Sheet Tag:

SS40

Item:

Lounge Chair

Performance Specifications:

Dimensions:

Finishes:

Image:

Fully upholstered arm chair with metal base * Attached seat cushions and loose back cushions * High density CFC-free polyurethane foam cushion with polyester padding. * Nickel plated flat bar steel legs and stringers * Floor glides. * Leather upholstery to have grease and stain resistant applied finish Overall: 900mm W x 825mm D x 760mm H Seat: 445mm H Upholstery: UPH9 Edelman Leather Lusterleather LL0013 Milkweed with Crypton finish (European full grain aniline dyed cowhide) Or Approved Equal Base: FIN5 Brushed Nickel Indicative of required aesthetic only.

UPH9

Location:

Refer to Furniture Layout Plans

Page 27 of 27 / T0

XC08100300/FF&E QP PROJECT NO. 1875, BP#4A-(EB)-3


PACKAGE 6- SoftSeating (2)