Page 1

Transducer Stimulator

This device enables the user to do a simple check on the extension cable (with or without an S13) and the monitor.

Product Overview If a system is not functioning it is not always clear which part of it needs attention. By exchanging the transducer for this unit, simulated zero pressure and approximate calibrated pressure steps can be presented to the system and the display checked for any errors. This will identify the problem as either in the recording apparatus and cables or the transducer. The unit can also be used to roughly set up the amplifier gain before calibrating the complete system with a known pressure using the calibration tube. Š 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU


The simulator can be supplied with 300mm Hg full scale (CA-2/300) or 150mm Hg full scale (CA-2/150).

Where to Buy The Transducer Stimulator can be ordered direct through Gaeltec Devices Ltd or one of many approved distributors Worldwide.

Š 2012 Gaeltec Devices Ltd - Miniature Pressure Sensors and Pressure Monitoring Equipment Telephone: +44 (0)1470 521 385 Fax: +44 (0)1470 521 369 Email us: web@gaeltec.com Gaeltec Devices Ltd, Glendale Road, Dunvegan, Isle of Skye, Scotland IV55 8GU

Transducer Stimulator - Gaeltec Devices Ltd  

Transducer Stimulator enables the user to do a simple check on the extension cable (with or without an S13) and the monitor.