Page 1


PRODUCTS SCREWS AND FIXINGS CUTTER

OTHER SCREWS AND FIXINGS

pg 28-35

pg 16-27

DISPLAY AND STORAGE

pg 36-41

MASONRY

pg 44-64

WOOD

pg 94-98

HSS

pg 65-77

SCREWDRIVER BITS

pg 99-101

SAWS AND HOLESAWS

pg 78-93

HACKSAW FRAMES

pg 102

HOLESAWS

pg 109

R2

pg 3-15

POWER TOOL ACCESSORIES

SETS HSS TILE DRILLS MASONRY

pg 104-106 pg 106

SCREWDRIVER BITS

pg 110-111

pg 107-109

MERCHANDISING STANDARD DEPOTS

pg 114-120

WOOD

pg 136-139

MASONRY

pg 121-127

SCREWDRIVER BITS

pg 139-142

COMBI-MODULES

pg 143-144

TILES/MULTI-PURPOSE

pg 128

HSS

pg 129-133

SAWS AND HOLESAWS

pg 134-135

CHUCKS

pg 145


SCREWS AND FIXINGS CUTTER Woodscrews Depot Clipbox TXD BZP Flooring Screw Timber Connector Tubs Mega Tubs Cases Cutter Trial Pack / Cutter Trade Pack

R2 Countersunk Yellow R2 Trade Pack Tubs Countersunk Zinc Square Drive Pan Head Retinox

OTHER SCREWS AND FIXINGS 2 Threads Drywall Deck Screw Concrete Frame Concrete Bolt CE Certification Wall Plugs

DISPLAY AND STORAGE Starter Depot Tub Merchandising Crate Mate

3-15 3-5 6 7 8 9 10 11 12 13 14 15

16-27 16-20 19 21 22-23 24 25 26-27

28-35 28 29 30-31 32 33 34 35

36-41 36 37 38-41


CUTTER

Due to the TWO unique patented

1

• Self countersinking into all timber and board materials. • No need to counterbore

2

Re-inforced collar

3

Lubricated, sharp, wide, deep thread

4

Yellow tropicalized

5

Two patented slots

slots (25mm and above), the Cutter allows screwing close to the edge without splitting. Under the head are BOTH ribs and tucks enabling the screw to sit flush and tight without surface damage. With

Distinct ribs and tucks

the ability to penetrate almost all

• Prevents snapping and gives depth for a wide, deep pozi to be inserted, therefore reducing the risk of “cam-out”

• Up to 40% reduction in driving resistance therefore less torque required. Quick and easy penetration without a pilot hole

Woodscrews

The next generation in performance woodscrews

• Yellow tropicalized finish gives superior rust resistance compared to a standard BZP screw

timbers without a pilot hole, this really is a screw worth using! Unique design with 2 slots cut into the thread on 30mm screws and above (1 cut up to 25mm) to allow the screw to work closer to the edge of timber and board materials without splitting.

6

CUTTER

• Prevents splitting when screwing close to the edge

25° Needle point • Immediate start

7

Eye-catching, informative packaging

Cutter

no surface damage

Standard screw

surface damage around countersunk head

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

3


CUTTER

High performance woodscrews including unique design with two patented slots (up to 25mm-one slot only), and ribs and tucks

Characteristics

Applications

1 yellow tropicalized deep pozi drive self c/sinking

cutter slots

needle point single/wide thread

all wood

soft wood

hard wood

board materials

• Slots allow the screw to work close to the edge of the material without splitting and penetrate almost all timbers without a pilot hole. • The ribs and tucks under the head allow the screw to sit flush and tight without surface damage.

Dimensions

CUTTER

Woodscrews

size (mm)

thread form

Craft product code

Handi-Pak

craft outer pack pcs quantity pcs

product code

Handi- outer pak pcs quantity pcs

◊3.0

x 10

full

8200S220300104

200

18,000

----

----

----

◊3.0

x 12

full

8200S220300124

200

18,000

----

----

----

◊3.0

x 16

full

8200S220300164

200

18,000

----

----

----

◊3.0

x 20

full

8200S220300204

200

18,000

----

----

----

◊3.0

x 25

full

8200S220300254

200

9,000

----

----

----

◊3.0

x 30

full

8200S220300304

200

9,000

----

----

----

◊3.0

x 35

full

8200S220300354

200

4,000

----

----

----

◊3.0

x 45

full

8200S220300454

200

4,000

----

----

----

◊NOTE:

These are R2 single thread without ribs, tucks and slots.

3.5 x 16

full

8200S220350164

200

9,000

----

----

----

3.5 x 20

full

8200S220350204

200

19,200

----

----

----

3.5 x 25

full

8200S220350254

200

19,200

----

----

----

3.5 x 30

full

8200S220350304

200

19,200

----

----

----

3.5 x 35

full

8200S220350354

200

14,400

----

----

----

3.5 x 40

full

8200S220350404

200

14,400

----

----

----

3.5 x 45

full

8200S220350454

200

14,400

----

----

----

3.5 x 50

full

8200S220350504

200

7,200

----

----

----

4.0 x 16

full

8200S220400164

200

9,000

----

----

----

4.0 x 20

full

8200S220400204

200

9,000

----

----

----

4.0 x 25

full

8200S220400254

200

19,200

----

----

----

4.0 x 30

full

8200S220400304

200

14,400

----

----

----

4.0 x 35

full

8200S220400354

200

14,400

----

----

----

4.0 x 40

full

8200S220400404

200

9,600

----

----

----

4.0 x 45

full

8200S220400454

200

7,200

----

----

----

4.0 x 50

full

8200S220400504

200

7,200

----

----

----

4.0 x 60 /36

part

8221S220400604

200

7,200

8221S220400602

100

3,600

4.0 x 70 /46

part

8221S220400704

200

4,800

8221S220400702

100

3,600

4.0 x 80 /50

part

8221S220400804

200

3,200

8221S220400802

100

2,400

Partially threaded lengths are shown as (Total length /threaded length).

4

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


CUTTER CONTINUED Dimensions

size (mm)

Craft

thread form

product code

Handi-Pak

craft outer pack pcs quantity pcs

product code

Handi- outer pak pcs quantity pcs

4.5 x 25

full

8200S220450254

200

14,400

----

----

----

4.5 x 30

full

8200S220450304

200

14,400

----

----

----

4.5 x 35

full

8200S220450354

200

9,600

----

----

----

4.5 x 40

full

8200S220450404

200

7,200

----

----

----

4.5 x 45

full

8200S220450454

200

7,200

----

----

----

4.5 x 50

full

8200S220450504

200

7,200

----

----

----

4.5 x 60 /36

part

8221S220450604

200

4,800

8221S220450602

100

3,600

4.5 x 70 /46

part

8221S220450704

200

4,800

8221S220450702

100

2,400

4.5 x 80 /50

part

8221S220450804

200

4,800

8221S220450802

100

2,400

5.0 x 25

full

8200S220500254

200

9,600

----

----

----

5.0 x 30

full

8200S220500304

200

9,600

----

----

----

5.0 x 35

full

8200S220500354

200

9,600

----

----

----

5.0 x 40

full

8200S220500404

200

4,800

----

----

----

5.0 x 45

full

8200S220500454

200

4,800

----

----

----

5.0 x 50

full

8200S220500504

200

4,800

----

----

----

5.0 x 55 /30

part

8221S220500554

200

4,800

----

----

----

5.0 x 60 /36

part

8221S220500604

200

4,800

8221S220500602

100

3,600

5.0 x 70 /46

part

8221S220500704

200

4,800

8221S220500702

100

2,400

5.0 x 80 /50

part

8221S220500804

200

3,200

8221S220500802

100

2,400

5.0 x 90 /60

part

8221S220500904

200

3,200

----

----

5.0 x 100 /60

part

8221S220501004

200

3,200

8221S220501002

100

2,400

5.0 x 120 /70

part

8221S220501204

200

2,400

----

----

----

6.0 x 40

part

8200S220600404

200

4,800

----

----

----

6.0 x 45

full

8200S220600454

200

3,200

----

----

----

6.0 x 50

full

8200S220600504

200

3,200

----

----

----

6.0 x 60

full

----

----

----

8221S220600602

100

3,600

6.0 x 70 /46

part

----

----

----

8221S220600702

100

3,600

6.0 x 80 /50

part

----

----

----

8221S220600802

100

2,400

6.0 x 90 /60

part

----

----

----

8221S220600902

100

2,400

6.0 x 100 /60

part

----

----

----

8221S220601002

100

2,400

6.0 x 110 /60

part

----

----

----

8221S220601102

100

1,600

6.0 x 120 /70

part

----

----

----

8221S220601202

100

1,600

6.0 x 130 /70

part

----

----

----

8221S220601302

100

1,600

6.0 x 140 /70

part

----

----

----

8221S220601402

100

1,600

6.0 x 150 /70

part

----

----

----

8221S220601502

100

1,200

*6.0 x 160 /70

part

----

----

----

8221S220601602

100

1,200

*6.0 x 180 /70

part

----

----

----

8221S220601802

100

1,200

*6.0 x 200 /70

part

----

----

----

8221S220602002

100

600

CUTTER

Woodscrews

* Sizes above 6.0 x 160 have a ‘rollet’, a criss-cross indentation on the shank which expands the timber on insertion allowing the screw to penetrate easier. Outer quantities can be subject to amendment.

Partially threaded lengths are shown as (Total length /threaded length). T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

5


CUTTER DEPOT Quality display product to maximise the visual impact of the Reisser stock profile. Depots can be tailor made to individual requirements. Please ask for details.

• 1 metre wide stand with 5 adjustable shelves. • Versatility, various components can be retro fitted to suit a changing profile. • Extension panel can be added when the stand is to be wall mounted bringing the height into line with existing merchandising. • Can be combined with Power Tool Accessory display systems to provde a combined merchandising solution.

Dimensions

size (mm)

product code

3.5x16 3.5x20 3.5x25 3.5x30 3.5x35 3.5x40 3.5x50 4.0x20 4.0x25 4.0x30 4.0x35 4.0x40 4.0x45 4.0x50 4.0x60 /36 4.0x70 /46 4.0x80 /50 4.5x30 4.5x40 4.5x50 4.5x60 /30 4.5x70 /46 4.5x80 /50 5.0x25 5.0x30 5.0x40 5.0x50 5.0x60 /36 5.0x70 /46 5.0x80 /50 5.0x90 /60 5.0x100 /60 5.0x120 /70 6.0x40 6.0x50 6.0x60 6.0x70 /46 6.0x80 /50 6.0x90 /60 6.0x100 /60 6.0x120 /70 6.0x150 /70 6.0x180 /70

8200S220350164 8200S220350204 8200S220350254 8200S220350304 8200S220350354 8200S220350404 8200S220350504 8200S220400204 8200S220400254 8200S220400304 8200S220400354 8200S220400404 8200S220400454 8200S220400504 8221S220400604 8221S220400704 8221S220400804 8200S220450304 8200S220450404 8200S220450504 8221S220450604 8221S220450704 8221S220450804 8200S220500254 8200S220500304 8200S220500404 8200S220500504 8221S220500604 8221S220500704 8221S220500804 8221S220500904 8221S220501004 8221S220501204 8200S220600404 8200S220600504 8221S220600602 8221S220600702 8221S220600802 8221S220600902 8221S220601002 8221S220601202 8221S220601502 8221S220601802

SHELF 1 SHELF 2 SHELF 3 SHELF 4 SHELF 5

Depot

CUTTER

Boxes

6

T: 0161 483 5557

packing 8 8 12 12 6 10 4 16 16 14 10 16 8 16 8 8 4 6 6 6 4 4 4 4 4 8 8 8 8 8 4 8 2 3 3 3 3 3 3 3 3 3 2

Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes Boxes

reisser.co.uk

of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of of

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100

total pieces 1,600 1,600 2,400 2,400 1,200 2,000 800 3,200 3,200 2,800 2,000 3,200 1,600 3,200 1,600 1,600 800 1,200 1,200 1,200 800 800 800 800 800 1,600 1,600 1,600 1,600 1,600 800 1600 400 600 600 300 300 300 300 300 300 300 200

Table shows list of recommended stock quantities and layout. Other options are available. Depot shown includes additional Power Tool Accessory option.

Partially threaded lengths are shown as (Total length /threaded length).

T: +353 579 333 314

reisser.ie


CUTTER

X O B P I L C

High Performance Woodscrews • Now available in new ‘ClipBox’ quantities 10s & 5s • New ‘ClipBox’ packaging – convenient, practical & reusable • Best selling CUTTER High Performance Woodscrews • Consistent & reliable        quality • 12 popular longer sizes – 70mm to 200mm

size (mm)

ClipBox Range

thread form

clipbox pcs

product code

4.5 x 70 /46

part

10

82214570CB

4.5 x 80 /50

part

10

82214580CB

on display

5.0 x 70 /46

part

10

8221570CB

5.0 x 80 /50

part

10

8221580CB

5.0 x 100 /60

part

10

82215100CB

5.0 x 120 /70

part

10

82215120CB

6.0 x 80 /50

part

10

8221680CB

6.0 x 100 /60

part

10

6.0 x 120 /70

part

10

Display Contents Qty clipbox

size (mm)

Qty screws per clipbox

product code

5

4.5 x 70 /46

10

82214570CB

5

4.5 x 80 /50

10

82214580CB

5

5.0 x 70 /46

10

8221570CB

5

5.0 x 80 /50

10

8221580CB

5

5.0 x 100 /60

10

82215100CB

5

5.0 x 120 /70

10

82215120CB

82216100CB

5

6.0 x 80 /50

10

8221680CB

82216120CB

5

6.0 x 100 /60

10

82216100CB

5

6.0 x 120 /70

10

82216120CB

5

6.0 x 150 /70

5

82216150CB

5

*6.0 x 180 /70

5

82216180CB

5

*6.0 x 200 /70

5

82216200CB

6.0 x 150 /70

part

5

82216150CB

*6.0 x 180 /70

part

5

82216180CB

*6.0 x 200 /70

part

5

82216200CB

Partially threaded lengths are shown as (Total length /threaded length).

* Sizes above 6.0 x 160 have a ‘rollet’, a criss-cross indentation on the shank

which expands the timber on insertion allowing the screw to penetrate easier.

T: 0161 483 5557 reisser.co.uk

CUTTER

Dimensions

Clipbox

• Attractive countertop display unit available

Partially threaded lengths are shown as (Total length /threaded length).

Empty Display Product Code: 8221CBCDU. T: +353 579 333 314 reisser.ie

7


CUTTER TXD

Re-inforced countersunk with ribs & tucks underneath Single thread with 2 slots cut out. ‘Fast Start’ thread-tip for instant grab. Part thread with rollet on shaft to aid insertion

Characteristics

Applications

1 zinc plated

txd drive

self c/sinking

cutter slots

fast start tip

single/wide thread

all wood

soft wood

hard wood

board materials

• New ‘Fast Start’ thread-tip for instant grab. • Slanted rollet on shaft to ease insertion into hard timbers. • TXD Drive for high torque transfer

Dimensions

Craft

size (mm)

drive bit size

product code

craft pack pieces

outer quantity pieces

4.0 x 30

TXD 20

8441S210400304

200

14,400

4.0 x 40

TXD 20

8441S210400404

200

9,600

4.0 x 50

TXD 20

8441S210400504

200

7,200

5.0 x 50

TXD 25

8441S210500504

200

4,800

5.0 x 60

TXD 25

8441S210500604

200

4,800

5.0 x 70

TXD 25

8441S210500704

200

4,800

5.0 x 80

TXD 25

8441S210500804

200

3,200

5.0 x 100

TXD 25

8441S210501004

200

3,200

CUTTER

TXD

8

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


CUTTER BZP

High performance woodscrews including unique design with two patented slots (up to 25mm-one slot only), ribs and tucks

Characteristics

Applications

1 zinc plated

deep pozi drive self c/sinking

cutter slots

needle point single/wide thread

all wood

soft wood

hard wood

board materials

• Slots allow the screw to work close to the edge of the material without splitting and penetrate almost all timbers without a pilot hole. • The ribs and tucks under the head allow the screw to sit flush and tight without surface damage.

size (mm)

thread form

product code

craft pack pieces

outer quantity pieces

3.5 x 16

full

8200S210350164

200

9,000

3.5 x 20

full

8200S220350204

200

19,200

3.5 x 25

full

8200S210350254

200

19,200

3.5 x 30

full

8200S210350304

200

19,200

3.5 x 40

full

8200S210350404

200

14,400

3.5 x 50

full

8200S210350504

200

7,200

4.0 x 16

full

8200S210400164

200

9,000

4.0 x 20

full

8200S210400204

200

9,000

4.0 x 25

full

8200S210400254

200

19,200

4.0 x 30

full

8200S210400304

200

14,400

4.0 x 40

full

8200S210400404

200

9,600

4.0 x 50

full

8200S210400504

200

7,200

4.0 x 60 /36

part

8221S210400604

200

7,200

4.0 x 70 /46

part

8221S210400704

200

4,800

4.5 x 30

full

8200S210450304

200

14,400

4.5 x 40

full

8200S210450404

200

7,200

4.5 x 80 /50

part

8221S210450804

200

4,800

5.0 x 25

full

8200S210500254

200

9,600

5.0 x 30

full

8200S210500304

200

9,600

5.0 x 40

full

8200S210500404

200

4,800

5.0 x 50

full

8200S210500504

200

4,800

5.0 x 60 /36

part

8221S210500604

200

4,800

5.0 x 70 /46

part

8221S210500704

200

4,800

5.0 x 80 /50

part

8221S210500804

200

3,200

5.0 x 100 /60

part

8221S210501004

200

3,200

BZP

Craft

CUTTER

Dimensions

Partially threaded lengths are shown as (Total length /threaded length).

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

9


FLOORING SCREW

1

Optimum Performance, TXD Drive Head • TXD drive provides more points of contact for better torque transfer and helps reduce ‘cam out’, bit slippage and bit wear. • The small, undercut head prevents the wood splitting, reduces burrs and minimizes head protrusion giving ‘secret’ fixing.

2

Intelligent Threading Action • The different lead angles of the upper and lower threads act to pull down any burrs and combine to fix the two materials tightly together giving no board movement.

3

Superior Performance • Case and through hardened reducing the risk of breakage. • High ductility gives minimum 30 degree bending angle.

4

Yellow Tropicalized Cr3 Plating • For superior rust resistance.

5

• Centres the screw after rapid insertion and gives excellent holding power into joists.

Flooring Screw

1 FREE BIT DRIVER X PER BO

CUTTER

Lubricated Sharp Wide Single Thread

• Invisible Reisser lubricant helps the screw drive in quickly and easily, reducing board friction for faster insertion and less power usage.

6

Fast Start ‘Diamond’ Point • For rapid insertion into all materials. • The special drilling point design provides a pre-drill function to help eliminate splitting of the wood without the need for a pilot hole.

• Small, undercut head • Prevents wood splitting • Secret fixing

Each batch checked thoroughly to guarantee ‘Consistency of Quality’

The optimum high performance flooring screw Characteristics

yellow tropicalized

txd drive

Applications

undercut head diamond point

all wood

secret fixing

soft wood

hard wood

chipboard

• Quick start • Low torque • Easy driving • High ductility

Dimensions

Ordering Info

size (mm)

drive bit size

product code

quantity pieces

box packing

outer quantity pieces

3.5 x 45

TXD10

6221S220350454

200

clear display pack

4,800

4.2 x 50

TXD15

6221S220420504

200

informative Reisser 2pc box

4,800

T: 0161 483 5557

reisser.co.uk

10

T: +353 579 333 314

reisser.ie


TIMBER CONNECTOR SCREWS

1

Optimum Performance, TXD Drive Washer Head • TXD drive provides more points of contact for better torque transfer and helps reduce ‘cam out’, bit slippage and bit wear. • Washer head offers greater tightening force and better connections than a countersunk head even in warped board.

2

High performance timber to timber fastener – ideal replacement for a coach screw

RMB - Nano Coating • Special metal bronze coating giving MINIMUM 2000 hours protection on a salt spray test. • Nano coating prevents recess clogging ensuring good driver bit fit and reduces coating peel off in timber. • Hex-chromium free.

3

Slanted Rollet

4

High Specification Steel for Superior Performance

5

Two Slots

6

25° Needle point

• To reduce drag and speed up insertion.

• Specially hardened steel gives maximum tensile and torsional strength - minimum 30° bending angle.

• Prevents splitting when screwing close to the edge.

Characteristics

nano coating

txd drive

pan washer head

Applications

cutter slots

needle point

all wood

soft wood

hard wood

chipboard

board materials

Ordering Info

Dimensions

size (mm)

Dimensions

drive bit size

craft pack product code

qty pcs

handipack product code

qty pcs

6.0 x 60

30

TCN60060B

25

TCN60060T

10

6.0 x 80

30

TCN60080B

25

TCN60080T

6.0 x 100

30

TCN60100B

25

6.0 x 120

30

TCN60120B

6.0 x 140

30

6.0 x 160

Ordering Info

drive bit size

craft pack product code

qty pcs

handipack product code

qty pcs

8.0 x 80

40

TCN80080B

25

TCN80080T

10

10

8.0 x 100

40

TCN80100B

25

TCN80100T

10

TCN60100T

10

8.0 x 120

40

TCN80120B

25

TCN80120T

10

25

TCN60120T

10

8.0 x 140

40

TCN80140B

25

TCN80140T

10

TCN60140B

25

TCN60140T

10

8.0 x 150

40

TCN80150B

25

TCN80150T

10

30

TCN60160B

25

TCN60160T

10

8.0 x 160

40

TCN80160B

25

TCN80160T

10

6.0 x 180

30

TCN60180B

25

TCN60180T

10

8.0 x 170

40

TCN80170B

25

TCN80170T

10

6.0 x 200

30

TCN60200B

25

TCN60200T

10

8.0 x 200

40

TCN80200B

25

TCN80200T

10

6.0 x 220

30

TCN60220B

25

TCN60220T

10

8.0 x 240

40

TCN80240B

25

TCN80240T

10

8.0 x 280

40

TCN80280B

25

TCN80280T

10

8.0 x 320

40

TCN80320B

25

TCN80320T

10

8.0 x 360

40

TCN80360B

25

TCN80360T

10

8.0 x 400

40

TCN80400B

25

TCN80400T

10

T: 0161 483 5557

reisser.co.uk

size (mm)

CUTTER

• Slots allow the screw to work close to the edge of the material without splitting and penetrate almost all timbers without a pilot hole.

T: +353 579 333 314

reisser.ie

Timber Connector

• Very sharp 25° point with the thread running to the end allowing immediate starting.

11


CUTTER TUBS

Reisser Tubs offer a great alternative to standard screwboxes. Waterproof, durable and tough they are re-usable, easy to stack and store, with integral hinged lid. They are also chemically treated to make them shatter-resistant and frost proof.

Characteristics

Applications

1 yellow tropicalized deep pozi drive self c/sinking

cutter slots

all wood

needle point single/wide thread

soft wood

hard wood

board materials

• Slots allow the screw to work close to the edge of the material without splitting and penetrate almost all timbers without a pilot hole. • The ribs and tucks under the head allow the screw to sit flush and tight without surface damage.

Dimensions size (mm)

CUTTER

Tubs

Tubs

Dimensions

thread form

product code

pieces per tub

full full full full full full full

82213516PB 82213520PB 82213525PB 82213530PB 82213535PB 82213540PB 82213550PB

2,500 2,200 2,000 1,600 1,400 1,250 950 2,000 1,600 1,500 1,400 1,200 1,000 900 700 650 500

3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50

4.0 x 16 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 /36 4.0 x 70 /46 4.0 x 80 /50

full full full full full full full part part part

8221416PB 8221425PB 8221430PB 8221435PB 8221440PB 8221445PB 8221450PB 8221460PB 8221470PB 8221480PB

4.5 x 40 4.5 x 50 4.5 x 60 /36 4.5 x 70 /46 4.5 x 80 /50

full full part part part

82214540PB 82214550PB 82214560PB 82214570PB 82214580PB

800 700 600 500 450

5.0 x 40 5.0 x 50 5.0 x 60 /36 5.0 x 70 /46 5.0 x 80 /50 5.0 x 90 /60 5.0 x 100 /60 5.0 x 120 /70

full full part part part part part part

8221540PB 8221550PB 8221560PB 8221570PB 8221580PB 8221590PB 82215100PB 82215120PB

725 600 500 450 400 300 250 190

12

T: 0161 483 5557 reisser.co.uk

Tubs

size (mm)

thread form

product code

pieces per tub

6.0 x 50 6.0 x 80 /50 6.0 x 100 /60

full part part

8221650PB 8221680PB 82216100PB

450 250 185

Supplied in full sleeves of 6 tubs per size only. Other sizes available on request. Partially threaded lengths are shown as (Total length /threaded length).

6

TUBS P OUTERER

des Inclu ser is 2x Re its B Pozi

T: +353 579 333 314 reisser.ie


CUTTER MEGA TUBS

MEGA TUBS

Larger quantity site tubs for high volume users.

Dimensions

Tubs

size (mm)

thread form

product code

4.0 x 40 4.0 x 50 4.0 x 60/36 4.0 x 70/46 5.0 x 50 5.0 x 60/36 5.0 x 70/46 5.0 x 80/50 5.0 x 100/60

full full part part full part part part part

8221440MT 8221450MT 8221460MT 8221470MT 8221550MT 8221540MT 8221570MT 8221580MT 82215100MT

pieces per tub 3500 2500 2000 1500 1900 1500 1200 1000 800

CUTTER

Tubs

• Packed in tough, re-sealable, re-usable tubs. • Great value on the most popular sizes.

T: 0161 483 5557 reisser.co.uk 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie 314 reisser.ie

13


CUTTER CASES Cases filled with Reisser Cutter CSK Pozi Yellow woodscrews. See page 4 for specifications.

• High quality storage solutions for REISSER® screws. • Easy to carry, stack and store, keep your screws organised and on-hand when on site.

CUTTER

Cases

Choose from the original steel or plastic chunky

Steel

Plastic

Part Code SC.214.MYCUTT

Part Code SC.417.MYCUTT

The Original Steel SYSTEM CASE® A robust, versatile, professional storage system. Manufactured to the highest quality standards it offers adaptable compartment storage with the additional features of industrial, heavy duty toggle catches plus an integral safety catch which locks on closing the lid to prevent accidental opening and spillage. Cases contain fourteen compartments filled with REISSER® CUTTER woodscrews.

Attractive, sturdy, plastic SORTA-CASE® offers large volume, deep, removable storage compartments which will accept box quantities of screws (most sizes). The cases have a clear lid to easily identify the contents, are designed to interlock on top of each other when stacked to prevent shifting in your van and have an aluminium ‘comfort’ carry handle and quality aluminium toggle catches.

CONTENTS

CONTENTS

3.5x20mm=250pcs, 3.5x25mm=190pcs, 3.5x30mm=160pcs,

3.5x40mm=200pcs (1box), 4.0x30mm=200pcs (1 box)

3.5x40mm=100pcs, 3.5x50mm=70pcs, 4.0x25mm=300pcs,

4.0x40mm=200pcs (1 box), 4.0x50mm=120pcs (1 box)

4.0x30mm=250pcs, 4.0x40mm=200pcs, 4.0x50mm=250pcs,

5.0x50mm=100pcs (1 box), 5.0x60mm=200pcs (1 box)

5.0x50mm=200pcs, 5.0x60mm=160pcs, 5.0x70mm=130pcs,

5.0x100mm=200pcs (1 box)

5.0x80mm=120pcs, 5.0x100mm=100pcs.

2pcs 2x25mm Reisser torsion pozi bits

SYSTEM CASES® are perfect for branding and advertising. The cases can be own brand/dual brand silk screen printed or totally branded in your corporate colours (min. quantities apply).

Ideal for storing larger volumes of your favourite REISSER® screws. The Chunky SORTA-CASE ® offers a great on-site solution to keep your screws organised and in top condition right where you need them!

Promote your company in your area Aim to get a branded case to every tradesman on every site in your area!

14

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie


CUTTER PACKS TRIAL/PROMO PACKS

6 BOX TRIAL PACK CONTAINS 200pcs of each of the following: • 4.0 x 20mm • 4.0 x 25mm • 4.0 x 30mm • 4.0 x 35mm • 4.0 x 40mm • 4.0 x 50mm Plus PZ2 x 25mm Reisser Torsion bits – 2pcs CODE: 6BOXCUTTERPACK

Packs

CUTTER TRADE PACK

CUTTER

CONTAINS 200pcs of each of the following: • 4.0 x 25mm • 4.0 x 30mm • 4.0 x 40mm • 4.0 x 50mm • 5.0 x 40mm • 5.0 x 50mm • 5.0 x 60mm • 5.0 x 80mm Plus PZ 2x25mm Reisser Torsion bits – 20pcs CODE: R2CUTTERTRADE

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

15


R2

1

WOODSCREWS

Countersunk Yellow

Performance Woodscrews Consistent Quality. ALWAYS!

R2

The sharp, wide, deep thread penetrates into all timbers without a pilot hole, giving exceptional pull-out. Each batch checked thoroughly to guarantee ‘consistency of quality’.

Re-inforced collar • The re-inforced collar under the head gives additional support to prevent snapping • The collar also allows a wide, deep pozi to be inserted. This reduces the risk of the bit jumping out and rounding off the edges

2

Lubricated, sharp, wide, deep thread • The invisible Reisser lubricant helps the screw drive in quickly and easily

3

High Strength • Specially hardened steel gives the R2 maximum tensile and torsional strength

4

Yellow tropicalized • Yellow tropicalized finish gives superior rust resistance compared to a standard BZP screw

5

Choice of thread • Available in full thread (primarily for board materials) or part thread (primarily for pulling two pieces of timber together tightly)

6

25° Needle point • Very sharp 25° point with the thread running to the end allowing immediate starting

7

16

T: 0161 483 5557

reisser.co.uk

Eye-catching, informative packaging

T: +353 579 333 314

reisser.ie


R2 WOODSCREWS COUNTERSUNK YELLOW

Characteristics

Applications

1 yellow tropicalized deep pozi drive

countersunk

all wood

single/wide thread

hard wood

plywood

board materials

• For use in all timbers (including hardwoods) plus board materials with or without a pilot hole.

size (mm)

Craft

thread form

product code

product code

craft packs

outer quantity pcs

3.0 x 10 (Hinge)

full

9210S220300108

1,000

45,000

9210S220300104

200

18,000

3.0 x 12 (Hinge)

full

9210S220300128

1,000

45,000

9210S220300124

200

18,000

3.0 x 16 (Hinge)

full

9210S220300168

1,000

20,000

9210S220300164

200

18,000

3.0 x 20 (Hinge)

full

9210S220300208

1,000

20,000

9210S220300204

200

18,000

3.0 x 25 (Hinge)

full

9210S220300258

1,000

8,000

9210S220300254

200

9,000

3.0 x 10

full

9200S220300108

1,000

45,000

9200S220300104

200

18,000

3.0 x 12

full

9200S220300128

1,000

20,000

9200S220300124

200

18,000

3.0 x 16

full

9200S220300168

1,000

20,000

9200S220300164

200

18,000

3.0 x 20

full

9200S220300208

1,000

20,000

9200S220300204

200

18,000

3.0 x 25

full

9200S220300258

1,000

8,000

9200S220300254

200

9,000

3.0 x 30

full

9200S220300308

1,000

8,000

9200S220300304

200

9,000

3.0 x 35

full

9200S220300358

1,000

16,000

9200S220300354

200

4,000

3.0 x 45

full

9200S220300458

1,000

12,000

9200S220300454

200

4,000

3.5 x 12

full

9200S220350128

1,000

20,000

9200S220350124

200

18,000

3.5 x 15

full

9200S220350158

1,000

20,000

9200S220350154

200

18,000

3.5 x 16

full

9200S220350168

1,000

20,000

9200S220350164

200

18,000

3.5 x 20

full

9200S220350208

1,000

24,000

9200S220350204

200

19,200

3.5 x 22

full

9200S220350228

1,000

24,000

9200S220350224

200

19,200

3.5 x 25

full

9200S220350258

1,000

24,000

9200S220350254

200

19,200

3.5 x 30

full

9200S220350308

1,000

16,000

9200S220350304

200

19,200

3.5 x 35

full

9200S220350358

1,000

16,000

9200S220350354

200

14,400

3.5 x 35 /20

part

9221S220350358

1,000

16,000

9221S220350354

200

14,400

3.5 x 40

full

9200S220350408

1,000

12,000

9200S220350404

200

14,400

3.5 x 40 /25

part

9221S220350408

1,000

12,000

9221S220350404

200

14,400

3.5 x 45

full

9200S220350458

1,000

12,000

9200S220350454

200

14,400

3.5 x 50 /30

part

9221S220350506

500

12,000

9221S220350454

200

7,200

3.5 x 50

full

9200S220350506

500

12,000

9200S220350504

200

7,200

industry outer packs quantity pcs

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length).

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

17

Countersunk Yellow

Industry

R2

Dimensions


R2 COUNTERSUNK YELLOW CONTINUED Dimensions

R2

Countersunk Yellow

size (mm) 4.0 x 12 4.0 x 16 4.0 x 18 4.0 x 20 4.0 x 22 4.0 x 25 4.0 x 27 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 40 /25 4.0 x 45 4.0 x 50 4.0 x 50 /30 4.0 x 55 4.0 x 60 /36 4.0 x 70 /46 4.0 x 80 /50 4.5 x 16 4.5 x 20 4.5 x 25 4.5 x 30 4.5 x 35 4.5 x 40 4.5 x 45 4.5 x 50 4.5 x 60 /36 4.5 x 70 /46 4.5 x 80 /50 5.0 x 20 5.0 x 25 5.0 x 30 5.0 x 35 5.0 x 40 5.0 x 45 5.0 x 50 5.0 x 50 /30 5.0 x 55 5.0 x 60 5.0 x 60 /36 5.0 x 70 /46 5.0 x 80 /50 5.0 x 90 /60 5.0 x 100 /60 5.0 x 120 /70

Industry

thread form

product code

full full full full full full full full full full part full full part full full full full full full full full full full full full part part part full full full full full full full part full full part part part part part part

9200S220400128 9200S220400168 9200S220400188 9200S220400208 9200S220400228 9200S220400258 9200S220400278 9200S220400308 9200S220400358 9200S220400406 9221S220400406 9200S220400456 9200S220400506 9221S220400506 9200S220400556 9221S220400606 9221S220400706 9221S220400806 9200S220450168 9200S220450208 9200S220450258 9200S220450308 9200S220450358 9200S220450406 9200S220450456 9200S220450506 9221S220450606 9221S220450706 9221S220450806 9200S220500208 9200S220500258 9200S220500308 9200S220500356 9200S220500406 9200S220500456 9200S220500506 9221S220500506 9200S220500556 9200S220500606 9221S220500606 9221S220500705 9221S220500805 9221S220500905 9221S220501005 9221S220501205

Craft

industry outer packs quantity pcs 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 500 500 500 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 1,000 1,000 1,000 500 500 500 500 500 500 500 500 400 400 400 400 400

20,000 24,000 24,000 24,000 24,000 16,000 16,000 18,000 12,000 12,000 12,000 12,000 9,000 9,000 9,000 9,000 6,000 6,000 8,000 8,000 16,000 12,000 12,000 12,000 12,000 9,000 6,000 6,000 6,000 16,000 16,000 12,000 8,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 4,800 4,800 2,400 2,400 2,400

product code

craft packs

outer quantity pcs

9200S220400124 9200S220400164 9200S220400184 9200S220400204 9200S220400224 9200S220400254 9200S220400274 9200S220400304 9200S220400354 9200S220400404 9221S220400404 9200S220400454 9200S220400504 9221S220400504 9200S220400554 9221S220400604 9221S220400704 9221S220400804 9200S220450164 9200S220450204 9200S220450254 9200S220450304 9200S220450354 9200S220450404 9200S220450454 9200S220450504 9221S220450604 9221S220450704 9221S220450804 9200S220500204 9200S220500254 9200S220500304 9200S220500354 9200S220500404 9200S220500454 9200S220500504 9221S220500504 9200S220500554 9200S220500604 9221S220500604 9221S220500704 9221S220500804 9221S220500904 9221S220501004 9221S220501204

200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

19,200 9,000 9,000 9,000 19,200 19,200 19,200 14,400 14,400 9,600 9,600 7,200 7,200 7,200 7,200 7,200 4,800 3,200

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length).

18

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

9,000 9,000 14,400 14,400 9,600 7,200 7,200 7,200 4,800 4,800 4,800 9,600 9,600 9,600 9,600 4,800 4,800 4,800 4,800 4,800 4,800 4,800 4,800 3,200 3,200 3,200 2,400


R2 COUNTERSUNK YELLOW CONTINUED Dimensions

size (mm)

Industry

thread form

product code

6.0 x 40

full

9200S220600405

500

6.0 x 50

full

9200S220600506

6.0 x 60

full

6.0 x 70 /46

Craft

industry outer packs quantity pcs

product code

craft packs

outer quantity pcs

6,000

9200S220600404

200

4,800

500

6,000

9200S220600504

200

3,200

9200S220600604

200

3,200

9200S220600602

100

3,600

part

9221S220600704

200

2,400

9221S220600702

100

3,600

6.0 x 80 /50

part

9221S220600804

200

2,400

9221S220600802

100

2,400

6.0 x 90 /50

part

9221S220600904

200

2,400

9221S220600902

100

2,400

6.0 x 100 /60

part

9221S220601004

200

2,400

9221S220601002

100

2,400

6.0 x 120 /70

part

9221S220601204

200

1,200

9221S220601202

100

1,600

6.0 x 130 /70

part

9221S220601304

200

1,200

9221S220601302

100

1,600

6.0 x 150 /70

part

9221S220601504

200

1,200

9221S220601502

100

1,200

6.0 x 180 /70

part

9221S220601804

200

1,200

9221S220601802

100

1,200

6.0 x 200 /70

part

9221S220602004

200

1,200

9221S220602002

100

600

6.0 x 220 /70

part

9221S220602204

N/A

N/A

9221S220602202

100

600

6.0 x 240 /70

part

9221S220602404

N/A

N/A

9221S220602402

100

600

R2 COUNTERSUNK YELLOW COLLATED • Re-inforced countersunk on strips of 50’s • Sharp, wide, deep single thread

ø

(mm)

ON AVAIL LY AB WHIL LE S STOCK T S LAST

strip box qty box qty quantity (strips) (pieces)

product code

per outer quantity

4.0 x 25

50

20

1,000

9200S22040025G

10,000

4.0 x 30

50

20

1,000

9200S22040030G

10,000

4.0 x 50

50

20

1,000

9200S22040050G

8,000

Countersunk Yellow

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length).

R2

Outer quantities can be subject to amendment.

R2 TRADE PACK CONTAINS 200pcs of each of the following: • 4.0 x 25mm • 4.0 x 30mm • 4.0 x 40mm • 4.0 x 50mm • 5.0 x 40mm • 5.0 x 50mm • 5.0 x 60mm • 5.0 x 80mm Plus PZ 2x25mm Reisser Torsion bits – 20pcs CODE: R2TRADEPACK2010 T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

19


R2 COUNTERSUNK YELLOW CONTINUED Dimensions

R2

Countersunk Yellow

size (mm)

Dimensions

Bulk

thread form

product code

bulk pack pieces

3.0 x 10 (Hinge)

full

9210S22030010B

50,000

3.0 x 12 (Hinge)

full

9210S22030012B

50,000

3.0 x 16 (Hinge)

full

9210S22030016B

3.0 x 20 (Hinge)

full

3.0 x 25 (Hinge)

size (mm)

Bulk

thread form

product code

bulk pack pieces

4.0 x 70 /46

part

9221S22040070B

2,500

4.0 x 80 /50

part

9221S22040080B

1,500

35,000

4.5 x 16

full

9200S22045016B

15,000

9210S22030020B

25,000

4.5 x 20

full

9200S22045020B

12,000

full

9210S22030025B

20,000

4.5 x 25

full

9200S22045025B

9,000

3.0 x 10

full

9200S22030010B

50,000

4.5 x 30

full

9200S22045030B

7,000

3.0 x 12

full

9200S22030012B

50,000

4.5 x 35

full

9200S22045035B

6,000

3.0 x 16

full

9200S22030016B

35,000

4.5 x 40

full

9200S22045040B

5,000

3.0 x 20

full

9200S22030020B

25,000

4.5 x 45

full

9200S22045045B

4,000

3.0 x 25

full

9200S22030025B

20,000

4.5 x 50

full

9200S22045050B

3,500

3.0 x 30

full

9200S22030030B

12,000

4.5 x 60 /36

part

9221S22045060B

2,500

3.0 x 35

full

9200S22030035B

12,000

4.5 x 70 /46

part

9221S22045070B

2,000

3.0 x 45

full

9200S22030045B

8,000

4.5 x 80 /50

part

9221S22045080B

1,500

3.5 x 12

full

9200S22035012B

35,000

5.0 x 20

full

9200S22050020B

8,000

3.5 x 15

full

9200S22035015B

25,000

5.0 x 25

full

9200S22050025B

8,000

3.5 x 16

full

9200S22035016B

25,000

5.0 x 30

full

9200S22050030B

7,000

3.5 x 20

full

9200S22035020B

20,000

5.0 x 35

full

9200S22050035B

5,000

3.5 x 22

full

9200S22035022B

20,000

5.0 x 40

full

9200S22050040B

4,000

3.5 x 25

full

9200S22035025B

15,000

5.0 x 45

full

9200S22050045B

4,000

3.5 x 30

full

9200S22035030B

13,000

5.0 x 50

full

9200S22050050B

3,000

3.5 x 35

full

9200S22035035B

9,000

5.0 x 50 /30

part

9221S22050050B

3,000

3.5 x 35 /20

part

9221S22035035B

9,000

5.0 x 55

full

9200S22050055B

3,000

3.5 x 40

full

9200S22035040B

7,000

5.0 x 60

full

9200S22050060B

2,500

3.5 x 40 /25

part

9221S22035040B

7,000

5.0 x 60 /36

part

9221S22050060B

2,500

3.5 x 45

full

9200S22035045B

6,000

5.0 x 70 /46

part

9221S22050070B

2,000

3.5 x 50 /30

part

9221S22035050B

5,000

5.0 x 80 /50

part

9221S22050080B

1,500

3.5 x 50

full

9200S22035050B

5,000

5.0 x 90 /60

part

9221S22050090B

1,000

4.0 x 12

full

9200S22040012B

25,000

5.0 x 100 /60

part

9221S22050100B

1,000

4.0 x 16

full

9200S22040016B

20,000

5.0 x 120 /70

part

9221S22050120B

700

4.0 x 18

full

9200S22040018B

20,000

6.0 x 40

full

9200S22060040B

3,500

4.0 x 20

full

9200S22040020B

15,000

6.0 x 50

full

9200S22060050B

1,800

4.0 x 22

full

9200S22040022B

15,000

6.0 x 60

full

9200S22060060B

1,500

4.0 x 25

full

9200S22040025B

12,000

6.0 x 70 /46

part

9221S22060070B

1,500

4.0 x 27

full

9200S22040027B

10,000

6.0 x 80 /50

part

9221S22060080B

1,200

4.0 x 30

full

9200S22040030B

10,000

6.0 x 90 /50

part

9221S22060090B

1,000

4.0 x 35

full

9200S22040035B

7,000

6.0 x 100 /60

part

9221S22060100B

900

4.0 x 40

full

9200S22040040B

6,000

6.0 x 120 /70

part

9221S22060120B

500

4.0 x 40 /25

part

9221S22040040B

6,000

6.0 x 130 /70

part

9221S22060130B

500

4.0 x 45

full

9200S22040045B

5,000

6.0 x 150 /70

part

9221S22060150B

400

4.0 x 50

4.0 x 50 /30

4.0 x 55

4.0 x 60 /36

full

9200S22040050B

4,000

6.0 x 180 /70

part

9221S22060180B

400

part

9221S22040050B

4,000

6.0 x 200 /70

part

9221S22060200B

400

full

9200S22040055B

3,500

6.0 x 220 /70

part

9221S22060220B

300

part

9221S22040060B

3,000

6.0 x 240 /70

part

9221S22060240B

300

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length).

20

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


R2 TUBS

Reisser Tubs offer a great alternative to standard screwboxes. Waterproof, durable and tough they are re-usable, easy to stack and store, with integral hinged lid. They are also chemically treated to make them shatter-resistant and frost proof.

Characteristics

Applications

1 yellow tropicalized deep pozi drive

countersunk

all wood

single/wide thread

hard wood

plywood

board materials

• For use in all timbers (including hardwoods) plus board materials with or without a pilot hole.

Tubs

Dimensions

size (mm)

thread form

product code

pieces per tub

3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 35 3.5 x 40 3.5 x 50

full full full full full full full

92213516PB 92213520PB 92213525PB 92213530PB 92213535PB 92213540PB 92213550PB

2,500 2,200 2,000 1,600 1,400 1,250 950

4.0 x 16 4.0 x 25 4.0 x 30 4.0 x 35 4.0 x 40 4.0 x 45 4.0 x 50 4.0 x 60 /36 4.0 x 70 /46

full full full full full full full part part

9221416PB 9221425PB 9221430PB 9221435PB 9221440PB 9221445PB 9221450PB 9221460PB 9221470PB

2,000 1,600 1,500 1,400 1,200 1,000 900 700 650

4.5 x 40 4.5 x 50 4.5 x 60 /36 4.5 x 70 /46 4.5 x 80 /50

full full part part part

92214540PB 92214550PB 92214560PB 92214570PB 92214580PB

800 700 600 500 450

5.0 x 40 5.0 x 50 5.0 x 60 /36 5.0 x 70 /46 5.0 x 80 /50 5.0 x 90 /60 5.0 x 100 /60 5.0 x 120 /70

full full part part part part part part

9221540PB 9221550PB 9221560PB 9221570PB 9221580PB 9221590PB 922150100PB 922150120PB

725 600 500 450 400 300 250 190

Partially threaded lengths are shown as (Total length /threaded length).

T: 0161 483 5557

reisser.co.uk

size (mm) 6.0 x 50 6.0 x 80 /50 6.0 x 100 /60

thread form

product code

pieces per tub

full part part

9221650PB 9221680PB 922160100PB

450 250 185

Supplied in full sleeves of 6 tubs per size only. Other sizes available on request.

6

TUBS P OUTERER

Tubs

Tubs

des Inclu ser is 2x Re its B i Poz

DISPLAY AND STORAGE OPTIONS AVAILABLE

T: +353 579 333 314

reisser.ie

21

R2

Dimensions


R2 WOODSCREWS COUNTERSUNK ZINC

Characteristics

Applications

1 zinc plated

deep pozi drive

countersunk

needle point single/wide thread

all wood

hard wood

plywood

board materials

• For use in all timbers (including hardwoods) plus board materials with or without a pilot hole.

R2

Countersunk Zinc

Dimensions

Industry

Craft

size (mm)

product code

industry outer pack pcs quantity pcs

product code

craft pack outer pcs quantity pcs

3.0 x 12 (Hinge)

9210S210300108

1000

20,000

9210S210300104

200

18,000

3.0 x 20 (Hinge)

9210S210300208

1000

20,000

9210S210300204

200

18,000

3.0 x 12

9200S210300128

1000

20,000

9200S210300124

200

18,000

3.0 x 16

9200S210300168

1000

20,000

9200S210300164

200

18,000

3.0 x 20

9200S210300208

1000

20,000

9200S210300204

200

18,000

3.0 x 25

9200S210300258

1000

8,000

9200S210300254

200

9,000

3.5 x 12

9200S210350128

1000

20,000

9200S210350124

200

18,000

3.5 x 16

9200S210350168

1000

20,000

9200S210350164

200

18,000

3.5 x 20

9200S210350208

1000

24,000

9200S210350204

200

19,200

3.5 x 25

9200S210350258

1000

24,000

9200S210350254

200

19,200

3.5 x 30

9200S210350308

1000

16,000

9200S210350304

200

19,200

3.5 x 35

9200S210350358

1000

16,000

9200S210350354

200

14,400

3.5 x 40

9200S210350408

1000

12,000

9200S210350404

200

14,400

3.5 x 45

9200S210350458

1000

12,000

9200S210350454

200

14,400

3.5 x 50

9200S210350506

500

12,000

9200S210350504

200

7,200

4.0 x 12

9200S210400128

1000

20,000

9200S210400124

200

19,200

4.0 x 16

9200S210400168

1000

24,000

9200S210400164

200

9,000

4.0 x 20

9200S210400208

1000

24,000

9200S210400204

200

9,000

4.0 x 25

9200S210400258

1000

16,000

9200S210400254

200

19,200

4.0 x 30

9200S210400308

1000

18,000

9200S210400304

200

14,400

4.0 x 35

9200S210400358

1000

12,000

9200S210400354

200

14,400

4.0 x 40

9200S210400406

500

12,000

9200S210400404

200

9,600

4.0 x 45

9200S210400456

500

12,000

9200S210400454

200

7,200

4.0 x 50

9200S210400506

500

9,000

9200S210400504

200

7,200

4.0 x 55

9200S210400556

500

9,000

9200S210400554

200

7,200

4.0 x 60 /36

9221S210400606

500

9,000

9221S210400604

200

7,200

4.0 x 70 /46

9221S210400706

500

6,000

9221S210400704

200

4,800

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length).

22

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


R2 COUNTERSUNK ZINC CONTINUED

Industry

size (mm)

product code

Craft

industry outer pack pcs quantity pcs

product code

craft pack outer pcs quantity pcs

4.5 x 20

9200S210450208

1000

8,000

9200S210450204

200

9,000

4.5 x 25

9200S210450258

1000

16,000

9200S210450254

200

14,400

4.5 x 30

9200S210450308

1000

12,000

9200S210450304

200

14,400

4.5 x 40

9200S210450406

500

12,000

9200S210450404

200

7,200

4.5 x 50

9200S210450506

500

9,000

9200S210450504

200

7,200

4.5 x 60

9200S210450606

500

6,000

9200S210450604

200

4,800

4.5 x 60 /36

9221S210450606

500

6,000

9221S210450604

200

4,800

4.5 x 70 /46

9221S210450706

500

6,000

9221S210450704

200

4,800

4.5 x 80 /50

9221S210450806

500

6,000

9221S210450804

200

4,800

5.0 x 25

9200S210500258

1000

16,000

9200S210500254

200

9,600

5.0 x 30

9200S210500308

1000

12,000

9200S210500304

200

9,600

5.0 x 40

9200S210500406

500

6,000

9200S210500404

200

4,800

5.0 x 60 /36

9221S210500606

500

6,000

9221S210500604

200

4,800

5.0 x 70 /46

9221S210500705

400

4,800

9221S210500704

200

4,800

5.0 x 80 /50

9221S210500805

400

4,800

9221S210500804

200

3,200

5.0 x 90 /60

9221S210500905

400

2,400

9221S210500904

200

3,200

5.0 x 100 /60

9221S210501005

400

2,400

9221S210501004

200

3,200

5.0 x 120 /70

9221S210501205

400

2,400

9221S210501204

200

2,400

6.0 x 50

9200S210600506

500

6,000

9200S210600504

200

3,200

6.0 x 60

9200S210600604

200

3,200

9200S210600602

100

3,600

6.0 x 80 /50

9221S210600804

200

2,400

9221S210600802

100

2,400

6.0 x 90 / 50

9221S210600904

200

2,400

9221S210600902

100

2,400

6.0 x 130/70

9221S210601304

200

1,200

9221S210601302

100

1,600

R2

Outer quantities can be subject to amendment. Partially threaded lengths are shown as (Total length /threaded length). Other sizes available on request - subject to minimum order quantity.

See

38 e g a P re o for m ation inform

CLE VER STORAGE AN D STACK ING

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie

Countersunk Zinc

Dimensions

23


R2 WOODSCREWS SQUARE DRIVE

Characteristics

Applications

1

OR yellow tropicalized square drive

countersunk

pan head

single/wide thread

all wood

hard wood

plywood

board materials

• Ideal when using in overhead applications due to “STICKFIT” connection between the driver bit and screw.

COUNTERSUNK Dimensions size (mm)

thread form

product code

4.5 x 20

full

9270S220450208

1,000

8,000

9270S220450204

200

9,000

4.5 x 25

full

9270S220450258

1,000

16,000

9270S220450254

200

14,400

4.5 x 30

full

9270S220450308

1,000

12,000

9270S220450304

200

14,400

4.5 x 40

full

9270S220450406

500

12,000

9270S220450404

200

7,200

4.5 x 50

full

9270S220450506

500

9,000

9270S220450504

200

7,200

5.0 x 30

full

9270S220500308

1,000

12,000

9270S220500304

200

9,600

5.0 x 40

full

9270S220500406

500

6,000

9270S220500404

200

6,000

5.0 x 50

full

9270S220500506

500

6,000

9270S220500504

200

7,000

5.0 x 70 /46

part

9271S220500705

400

4,800

9271S220500704

200

4,800

industry outer pack pcs quantity pcs

product code

craft pack outer pcs quantity pcs

Partially threaded lengths are shown as (Total length /threaded length).

PAN HEAD Dimensions

R2

Craft

Square Drive

Industry

Industry

Craft

size (mm)

thread form

product code

4.5 x 20

full

9273S220450208

1,000

8,000

9273S220450204

200

9,000

4.5 x 25

full

9273S220450258

1,000

12,000

9273S220450254

200

14,400

4.5 x 30

full

9273S220450308

1,000

12,000

9273S220450304

200

14,400

4.5 x 40

full

9273S220450406

500

12,000

9273S220450404

200

7,200

4.5 x 50

full

9273S220450506

500

9,000

9273S220450504

200

7,200

5.0 x 40

full

9273S220500406

500

6,000

9273S220500404

200

4,800

5.0 x 50

full

9273S220500506

500

6,000

9273S220500504

200

4,800

industry outer pack pcs quantity pcs

product code

craft pack outer pcs quantity pcs

SQUARE DRIVE BITS Dimensions tip type

size

SQD

No.2

SEE Wallet PAGE

shank bit length type (mm) C6.3

25

FOR F 32 LL per R wallet ANGEUpcs SCREW OF product code wallet DRI BITS VER

R2W

2

Handi-Pak handi-pak product code R2PB

See pages 99-100 for full range of bits.

24

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

pcs per box 10


R2 WOODSCREWS PAN HEAD YELLOW

Characteristics

Applications

1 yellow tropicalized deep pozi drive

pan head

all wood

single/wide thread

hard wood

plywood

board materials

• For use in all timbers (including hardwoods) plus board materials with or without a pilot hole.

Craft

size (mm)

product code

industry pack pcs

outer quantity pcs

product code

craft pack outer pcs quantity pcs

3.0 x 12

9203S220300128

1,000

20,000

9203S220300124

200

18,000

3.0 x 16

9203S220300168

1,000

20,000

9203S220300164

200

18,000

3.0 x 20

92035220300208

1,000

20,000

92035220300204

200

18,000

3.5 x 12

9203S220350128

1,000

20,000

9203S220350124

200

18,000

3.5 x 15

9203S220350158

1,000

20,000

9203S220350164

200

18,000

3.5 x 16

9203S220350168

1,000

20,000

9203S220350164

200

18,000

3.5 x 20

9203S220350208

1,000

24,000

9203S220350204

200

19,200

3.5 x 25

9203S220350258

1,000

24,000

9203S220350254

200

19,200

3.5 x 30

9203S220350308

1,000

16,000

9203S220350304

200

19,200

3.5 x 35

9203S220350358

1,000

16,000

9203S220350354

200

14,400

4.0 x 12

9203S220400128

1,000

20,000

9203S220400124

200

19,200

4.0 x 16

9203S220400168

1,000

24,000

9203S220400164

200

9,000

4.0 x 20

9203S220400208

1,000

24,000

9203S220400204

200

9,000

4.0 x 25

9203S220400258

1,000

16,000

9203S220400254

200

19,200

4.0 x 30

9203S220400308

1,000

18,000

9203S220400304

200

14,400

4.0 x 35

9203S220400358

1,000

12,000

9203S220400354

200

14,400

4.0 x 40

9203S220400406

500

12,000

9203S220400404

200

9,600

4.0 x 45

9203S220400456

500

12,000

9203S220400454

200

7,200

4.0 x 50

9203S220400506

500

9,000

9203S220400504

200

7,200

4.5 x 20

9203S220450208

1,000

8,000

9203S220450204

200

9,000

4.5 x 40

9203S220450406

500

12,000

9203S220450404

200

7,200

5.0 x 20

9203S220500208

1,000

16,000

9203S220500204

200

9,600

5.0 x 25

9203S220500258

1,000

16,000

9203S220500254

200

9,600

5.0 x 30

9203S220500306

500

12,000

9203S220500304

200

9,600

5.0 x 40

9203S220500406

500

6,000

9203S220500404

200

4,800

5.0 x 45

9203S220500456

500

6,000

9203S220500454

200

4,800

5.0 x 50

9203S220500506

500

6,000

9203S220500504

200

4,800

5.0 x 60

9203S220500606

500

6,000

9203S220500604

200

4,800

Outer quantities can be subject to amendment. T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

25

Pan Head

Industry

R2

Dimensions


C O N SIST E NT

GUARAN QU

A2 Stainless Steel to offer excellent corrosion resistance in wet & dry and in extreme hot/cold conditions.

Dimensions

Ordering Info

thread form

craft pack product code

box pcs

clipbox clipbox product code pcs

full

9220V110300164

200

----

full full full full full full

9220V110350164 9220V110350204 9200V110350254 9220V110350304 9220V110350404 9220V110350504

200 200 200 200 200 200

---- RET3520CB RET3525CB RET3530CB ---- ----

-30 30 30 ---

--

l Very sharp 25° point with the thread running

3.5 x 16 3.5 x 20 3.5 x 25 3.5 x 30 3.5 x 40 3.5 x 50

l The sharp, wide, deep thread penetrates into all timbers WITHOUT a pilot hole, giving exceptional pull-out. l The invisible Reisser lubricant helps the

4.0 x 20 4.0 x 25 4.0 x 30 4.0 x 40 4.0 x 50 4.0 x 60 /36 4.0 x 70 /46

full full full full full part part

9220V110400204 9220V110400254 9220V110400304 9220V110400404 9220V110400504 9221V110400604 9221V110400704

200 200 200 200 200 200 200

---- ---- RET430CB RET440CB RET450CB ---- ----

--20 20 15 ---

4.5 x 30 4.5 x 40 4.5 x 50 4.5 x 60 /36 4.5 x 70 /46 4.5 x 80 /50

full full full part part part

9220V110450304 9220V110450404 9220V110450504 9221V110450604 9221V110450704 9221V110450804

200 200 200 200 200 200

RET4530CB ---- RET4550CB ---- RET4570CB ----

20 -15 -10 --

5.0 x 25 5.0 x 30 5.0 x 40 5.0 x 50 5.0 x 60 /36 5.0 x 70 /46 5.0 x 80 /50 5.0 x 100 /60

full full full full part part part part

9220V110500254 9220V110500304 9220V110500404 9220V110500504 9221V110500604 9221V110500704 9221V110500804 9221V110501004

200 200 200 200 200 200 200 200

---- RET530CB RET540CB RET550CB RET560CB ---- RET580CB RET5100CB

-15 10 10 10 -5 5

6.0 x 30 6.0 x 40 6.0 x 50 6.0 x 60 /36 6.0 x 70 /46 6.0 x 80 /50 6.0 x 100 /60

full full full part part part part

9220V110600304 9220V110600404 9220V110600504 9221V110600602 9221V110600702 9221V110600802 9221V110601004

200 200 200 100 100 100 100

---- ---- ---- RET660CB ---- RET680CB RET6100CB

---5 -5 4

screw drive in quickly and easily.

Retinox

size (mm)

3.0 x 16

to the end allowing immediate starting. No need to ‘pre-start’.

R2

A LIT Y

SCREWS

R2

TEED

l Available in full thread (primarily for board materials) or part thread (primarily for pulling two pieces of timber together tight). l The re-inforced collar under the head gives additional support to prevent snapping. l The collar also allows a wide, deep pozi to be inserted. This reduces the risk of the bit jumping out and rounding off the edges. l Each batch checked thoroughly to

guarantee ‘consistency of quality’.

Characteristics

Partially threaded lengths are shown as (Total length /threaded length).

Applications 1

stainless steel

26

deep countersunk single/ pozi drive wide thread

all wood hard wood

T: 0161 483 5557 reisser.co.uk

plywood

board materials

➧ Stainless Steel A2 Grade 304 (18/8) ➧ High Corrosion Protection ➧ High Resistance to Chemicals/Dyes/Foodstuffs ➧ Virtually Non Magnetic ➧ Ideal for Hygiene/Sterile Environments ➧ Attractive Finish - Ideal when visible T: +353 579 333 314 reisser.ie


C O N SIST E NT

GUARAN QU

A LIT Y

SCREWS

R2

TEED

X O B P I L C

A2 Stainless Steel Performance Woodscrews to offer excellent corrosion resistance in many different environments. Also available in ‘ClipBox’ packs – convenient, practical & reusable. 18 popular sizes - 20mm to 100mm in handy ‘ClipBox’ quantities. Consistent & reliable        quality. Attractive countertop display unit available.

Qty clipbox on display

size (mm)

product code

screws pcs per clipbox

5

3.5 x 20

RET3520CB

30

5

3.5 x 25

RET3525CB

30

5

3.5 x 30

RET3530CB

30

5

4.0 x 30

RET430CB

20

5

4.0 x 40

RET440CB

20

5

4.0 x 50

RET450CB

15

5

4.5 x 30

RET4530CB

20

5

4.5 x 50

RET4550CB

15

5

4.5 x 70 /46

RET4570CB

10

5

5.0 x 30

RET530CB

15

5

5.0 x 40

RET540CB

10

5

5.0 x 50

RET550CB

10

5

5.0 x 60 /36

RET560CB

10

5

5.0 x 80 /50

RET580CB

5

5

5.0 x 100 /60

RET5100CB

5

5

6.0 x 60 /36

RET660CB

5

5

6.0 x 80 /50

RET680CB

5

5

6.0 x 100 /60

RET6100CB

4

Partially threaded lengths are shown as (Total length /threaded length).

Empty CDU Product Code: RETCBCDU

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie

Retinox

Display Contents

R2

• • • •

27


WOODSCREWS 2 THREADS

Characteristics

Applications

2 zinc plated

deep pozi drive

countersunk

twin thread

soft wood

hard wood

plywood

chipboard

• A premium quality, Reisser branded woodscrew. Zinc plated, for general purpose applications.

Craft

SCREWS AND FIXINGS

2 Threads

Dimensions

Craft

Dimensions

imperial size

product code

craft pack outer pcs quantity pcs

imperial size

4 x 1/2

9300OUTER30012

200

4 x 5/8

9300OUTER30016

4 x 3/4

4 x 1

product code

craft pack outer pcs quantity pcs

8,000

10 x 1

9300OUTER50025

200

8,000

200

8,000

10 x 1 1/4

9300OUTER50030

200

6,000

9300OUTER30020

200

8,000

10 x 1 1/2

9300OUTER50040

200

4,000

9300OUTER30025

200

12,000

10 x 1 3/4

9300OUTER50045

200

4,000

10 x 2

9300OUTER50050

200

4,000

6 x 1/2

9300OUTER35012

200

8,000

10 x 2 1/4

9300OUTER50055

200

2,000

6 x 5/8

9300OUTER35016

200

12,000

10 x 2 1/2

9300OUTER50060

200

2,000

6 x 3/4

9300OUTER35020

200

12,000

10 x 3

9300OUTER50075

200

2,000

6 x 1

9300OUTER35025

200

12,000

10 x 3 1/2

9300OUTER50090

100

1,000

6 x 1 1/4

9300OUTER35030

200

8,000

10 x 4

9300OUTER50100

100

1,000

6 x 1 1/2

9300OUTER35040

200

8,000

6 x 2

9300OUTER35050

200

4,000

12 x 1 1/4

9300OUTER55030

200

4,000

12 x 1 1/2

9300OUTER55040

200

4,000

7 x 3/4

9300OUTER40020

200

12,000

12 x 2

9300OUTER55050

200

2,000

7 x 1

9300OUTER40025

200

8,000

12 x 2 1/2

9300OUTER55060

200

2,000

7 x 1 1/4

9300OUTER40030

200

8,000

12 x 3

9300OUTER55075

100

1,000

7 x 1 1/2

9300OUTER40040

200

8,000

12 x 3 1/2

9300OUTER55090

100

1,000

12 x 4

9300OUTER55100

100

1,000

8 x 1/2

9300OUTER42012

200

8,000

8 x 5/8

9300OUTER42016

200

12,000

8 x 3/4

9300OUTER42020

200

12,000

8 x 1

9300OUTER42025

200

8,000

8 x 1 1/4

9300OUTER42030

200

8,000

8 x 1 1/2

9300OUTER42040

200

6,000

8 x 1 3/4

9300OUTER42045

200

4,000

8 x 2

9300OUTER42050

200

4,000

8 x 2 1/4

9300OUTER42055

200

4,000

8 x 2 1/2

9300OUTER42060

200

2,000

8 x 3

9300OUTER42075

200

2,000

28

T: 0161 483 5557 reisser.co.uk

Outer quantities can be subject to amendment.

T: +353 579 333 314 reisser.ie


DRYWALL SCREWS A bugle head screw with extra sharp point, available in black phosphate with a coarse thread, or zinc plated with a fine thread.

COARSE THREAD

FINE THREAD

BLACK PHOSPHATE Characteristics

ALL BOXES FREE IN A CONTA 25mm PH2x RIVER D SCREW IT B

ZINC PLATED Characteristics

Applications

Applications

1 bugle

single/wide thread

plasterboard to timber

• Black phospate, with a coarse thread, for use when applying gypsum plasterboard to timber sub-frames

Dimensions

size (mm)

zinc plated

ph drive

bugle

plasterboard to steel

• Zinc plated, with a fine thread, for use when applying gypsum plasterboard to steel partitioning

Ordering Info product code

fine thread

Dimensions

Ordering Info

box pcs

size (mm)

product code

box pcs

3.5 x 25

DWSB350258

1,000

3.5 x 25

DWSZ350258

1,000

3.5 x 32

DWSB350328

1,000

3.5 x 32

DWSZ350328

1,000

3.5 x 38

DWSB350388

1,000

3.5 x 38

DWSZ350388

1,000

3.5 x 42

DWSB350428

1,000

3.5 x 42

DWSZ350428

1,000

3.5 x 50

DWSB350508

1,000

3.5 x 50

DWSZ350508

1,000

3.5 x 60

DWSB350606

500

3.5 x 60

DWSZ350606

500

4.2 x 65

DWSB420656

500

4.2 x 65

DWSZ420656

500

4.2 x 75

DWSB420756

500

4.2 x 75

DWSZ420756

500

4.8 x 100

DWSB481006

200

4.8 x 100

DWSZ481006

200

4.8 x 125

DWSB481254

200

4.8 x 125

DWSZ481254

200

4.8 x 150

DWSB481504

200

4.8 x 150

DWSZ481504

200

Outer quantities can be subject to amendment.

Outer quantities can be subject to amendment.

BLACK COARSE THREAD COLLATED • Re-inforced countersunk on strips of 50’s • Sharp, wide, deep single thread

Dimensions

Dimensions

Ordering Info

size (mm)

box pcs

product code

size (mm)

box pcs

product code

3.5 x 25

1,000

DWSB35025G

3.5 x 50

1,000

DWSB35050G

3.5 x 32

1,000

DWSB35032G

3.5 x 60

1,000

DWSB35060G

3.5 x 35

1,000

DWSB35035G

4.2 x 65

1,000

DWSB42065G

3.5 x 38

1,000

DWSB35038G

4.8 x 75

1,000

DWSB48075G

3.5 x 42

1,000

DWSB35042G

T: 0161 483 5557

Ordering Info

reisser.co.uk

Outer quantities can be subject to amendment.

T: +353 579 333 314

reisser.ie

29

Drywall

ph drive

SCREWS AND FIXINGS

black finish


DECK SCREW

1

Innovative Reisser Recess with Interior Hole • Unique design with deep interior hole giving ultimate ‘stick-fit’ connection and optimum driving torque from the power tool. • No risk of bit jumping out therefore no risk of scratching protective coating. • Designed to accept a standard square drive No. 2 bit as well as the innovative Reisser Recess bit.

The optimum high performance decking screw

2

Tornado Ribs

3

Threads Under The Head

4

Reduced Parallel Shank

5

RMB - Nano Coating

• Eases countersinking to prevent any splits or damage around the screw head.

• Allows the screw to lock tight into the decking giving no board movement and superior fix.

• Reduces board friction to assist easy driving and allows decking to be screwed down tight without pre-drilling.

• Special metal bronze coating giving MINIMUM 2000 hours protection on a salt spray test. • Nano coating prevents recess clogging ensuring good driver bit fit and reduces coating peel off in timber. • Hex-chromium free. • Also available with KTC0 Category 4 Coating to give 15 years outdoor protection. (Please enquire for prices/leadtime)

6

Single Thread • Centres up the screw after rapid insertion

Deck Screw

• Gives excellent holding power in the timber frame.

SCREWS AND FIXINGS

1 FREE BIT DRIVER X PER BO

7

Patented 25° Spiral Point with Cut. • 25° Tip gives immediate start. • 3 Separate ‘intro’ threads give rapid acceleration into the decking. • 10mm Single Cut reduces splitting.

Characteristics

bronze coated

Reisser recess

countersunk

cutter slots

Applications

spiral point

tornado ribs

soft wood

hard wood

decking

chipboard

• Quick Start • Low torque • Easy driving • High ductility • High anti-corrosion coating.

Dimensions

Ordering Info

size (mm)

product code

box pcs

packing

outer quantity pcs

4.5 x 50 4.5 x 50 4.5 x 63 4.5 x 63 4.5 x 63 4.8 x 70 4.8 x 70

8331S22045050T 8331S220450508 8331S22045063T 8331S220450636 8331S220450638 8331S22048070T 8331S220480708

200 1,000 200 500 1,000 200 1,000

clear plastic box clear plastic box clear plastic box clear plastic box clear plastic box clear plastic box clear plastic box

2,400 1,000 2,400 4,000 1,000 2,400 1,000

30

T: 0161 483 5557

reisser.co.uk

Packed in clear plastic boxes

• Waterproof • Durable • Tough • Re-usable

T: +353 579 333 314

reisser.ie


DECK SCREW

1

MINI DEPOT

Innovative Reisser Recess with Interior Hole • Unique design with deep interior hole giving ultimate ‘stick-fit’ connection and optimum driving torque from the power tool. • No risk of bit jumping out therefore no risk of scratching protective coating. • Designed to accept a standard square drive No. 2 bit as well as the innovative Reisser Recess bit.

A quality display product to maximise the visual impact of the Reisser stock profile.

2

Tornado Ribs

3

Threads Under The Head

4

Reduced Parallel Shank

5

RMB - Nano Coating

• Eases countersinking to prevent any splits or damage around the screw head.

• Allows the screw to lock tight into the decking giving no board movement and superior fix.

• Reduces board friction to assist easy driving and allows decking to be screwed down tight without pre-drilling.

• Special metal bronze coating giving MINIMUM 2000 hours protection on a salt spray test.

• Fully customisable to meet your requirements.

• Nano coating prevents recess clogging ensuring good driver bit fit and reduces coating peel off in timber.

• Hold the exact stock profile you need.

• Hex-chromium free.

6

Deck Screw Depot

• Also available with KTC0 Category 4 Coating to give 15 years outdoor protection. (Please enquire for prices/leadtime) Single Thread • Centres up the screw after rapid insertion • Gives excellent holding power in the timber frame.

7

Patented 25° Spiral Point with Cut. • 25° Tip gives immediate start. • 3 Separate ‘intro’ threads give rapid acceleration into the decking.

Characteristics

bronze coated

Reisser recess

countersunk

cutter slots

Applications

spiral point

soft wood

tornado ribs

hard wood

decking

chipboard

• Quick Start • Low torque • Easy driving • High ductility • High anti-corrosion coating.

Dimensions

Unit Dimensions - 60cm w x 31cm d x 118cm h (163cm Including Header)

T: 0161 483 5557

Recommended Stock Profile

size (mm)

product code

box pcs

outer quantity pcs

box qty

4.5 x 50 4.5 x 50 4.5 x 63 4.5 x 63 4.5 x 63 4.8 x 70 4.8 x 70

8331S22045050T 8331S220450508 8331S22045063T 8331S220450636 8331S220450638 8331S22048070T 8331S220480708

200 1,000 200 500 1,000 200 1,000

2,400 1,000 2,400 4,000 1,000 2,400 1,000

12 1 24 8 2 12 1

reisser.co.uk

T: +353 579 333 314

reisser.ie

31

SCREWS AND FIXINGS

• 10mm Single Cut reduces splitting.


CONCRETE FRAME SCREW

1

• For increased torque control and reduced ‘cam out’

2

Locking ribs underneath head

3

Through-fixing

4

High load capacity

Concrete Frame

5

Stress-free fixing • Enables materials to be fixed at closer edge distances than normal expansion anchors • Serrated threads aid debris removal to reduce fixing stress

6

Versatile fixing • Can be used for fixing window/door frames, timber batons, facades, laths etc. into masonry

Characteristics

yellow tropicalized

SCREWS AND FIXINGS

• Eliminating the need for marking and re-positioning

• With interlocking ‘hi-low’ thread to give high pull out resistance in base materials

Suitable for use with

• CONCRETE 1 FR • BRICK TXD EE • WOOD INPESERT 3B0IT R BO X • STONE

TXD drive

txd drive

hi-low thread serrated thread

Applications

upvc profiles

concrete

natural stone

solid brick

• Exceptional, reliable performance on a wide variety of materials • Edge-close fixing

Dimensions

Ordering Info

size (mm)

product code

pieces per box

7.5 x 42 7.5 x 52 7.5 x 62 7.5 x 72 7.5 x 82 7.5 x 92 7.5 x 102 7.5 x 112 7.5 x 122 7.5 x 132 7.5 x 152 7.5 x 182 7.5 x 202

REI42CF REI52CF REI62CF REI72CF REI82CF REI92CF REI102CF REI112CF REI122CF REI132CF REI152CF REI182CF REI202CF

100 100 100 100 100 100 100 100 100 100 100 100 100

32

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

hollow hole brick


Suitable for use with

• CONCRETE • BRICK • WOOD • MARBLE • STONE

1

Self tapping Hexhead masonry fixing

2

Uses standard size hammer or percussion drill bits

3

Can be removed or re-fixed into the same hole

4

Made from high grade steel with zinc and yellow passivation for increased durability

5

Virtually stress free

6

Stress-free fixing

• Allowing close to edge fixing distances

• The first four threads have specially designed cutting ribs allowing ease of fixing into almost every type of substrate

Characteristics

yellow tropicalized

hex head

hi-low thread serrated thread

Applications

all wood

concrete

natural stone

solid brick

Concrete Bolt

CONCRETE BOLT

marble

• Manufactured to QS9000 standards from high grade steel an after special heat treatment attains a tensile strength of 800N/mm2. • Safe anchoring can be achieved without the need of extremely high tightening forces due to pull out values.

size (mm) M6 x 50 (Flange head) M6 x 75 (Flange head) M6 x 100 (Flange head) M8 x 75 M8 x 100 M8 x 130 M8 x 150 M10 x 60 M10 x 75 M10 x 100 M10 x 130 M10 x 150 M12 x 75 M12 x 100 M12 x 130 M12 x 150 M12 x 200

Ordering Info product code

pieces per box

REI650CB REI675CB REI6100CB REI875CB REI8100CB REI8130CB REI8150CB REI1060CB REI1075CB REI10100CB REI10130CB REI10150CB REI1275CB REI12100CB REI12130CB REI12150CB REI12200CB

100 100 100 100 100 50 50 50 50 50 25 25 50 50 25 20 20

SCREWS AND FIXINGS

Dimensions

M16 Bolts available to order. T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

33


CE CERTIFICATION R2 CERTIFICATES The Construction Products Regulation (CPR) lays down harmonised rules for the marketing of construction products in the EU. The Regulation provides a common technical language to assess the performance of construction products. It ensures that reliable information is available to professionals, public authorities, and consumers, so they can compare the performance of products from different manufacturers in different countries. The CE Marking indicates that a construction product is in conformity

CE Certification

with its declared performance and that it has been assessed according to a harmonised European standard or a European Technical Assessment has

SCREWS

been issued for it.

CUTTER CERTIFICATES

34

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie


EXPANSION WALL PLUGS With anti-rotation design at the plug head for extra holding power, these all-purpose lightweight fixings provide a self-locating internal channel for screws.

YELLOW PLUGS

5mm

3/3.5mm (No.4/6)

DRILL

SCREW concrete

5mm 5mm

• Premium quality wall plugs. • Manufactured from New PE (polyethylene). • 5mm two way expansion in sprues of 10. • Boxed in 100’s/Shrinkwrapped in 1,000’s.

30mm

Applications

DRILL concrete

5.5mm 3.5/4.5mm 5.5mm (No.6/8) 5.5mm

• Premium quality wall plugs. • Manufactured from New PE (polyethylene). • 5.5mm two way expansion in sprues of 10. • Boxed in 100’s/Shrinkwrapped in 1,000’s.

natural stone

natural stone

solid brick

Packing Specification

pack quantity

solid brick

Ordering Info

product code

Packing Specification

no. of pcs

pack quantity

Ordering Info

product code

no. of pcs

10 x (10x10)

YELLOWPLUG1000

1,000

10 x (10x10)

REDPLUG1000

1,000

YELLOWPLUGOUTER

10,000

REDPLUGOUTER

10,000

10 x 1,000

10 x 1,000

BROWN PLUGS Characteristics

35mm

7mm

5/6mm (No.10/12)

BLUE PLUGS Characteristics

Applications

SCREW

DRILL

SCREW concrete

7mm 7mm

50mm

Applications

DRILL

10mm 6/7mm 10mm (No.12/14) 10mm

• Premium quality wall plugs • Manufactured from New PE (polyethylene) • 10mm two way expansion in sprues of 10. • Boxed in 100’s/Shrinkwrapped in 1000’s.

natural stone

natural stone

solid brick

Packing Specification

solid brick

Ordering Info

Packing Specification

product code

no. of pcs

10 x (10x10)

BROWNPLUG1000

1,000

BROWNPLUGOUTER

10,000

pack quantity 10 x 1,000

concrete

8mm(No.14) 8mm

• Premium quality wall plugs • Manufactured from New PE (polyethylene) • 7mm two way expansion in sprues of 10. • Boxed in 100’s/Shrinkwrapped in 1000’s.

Expansion Wall Plugs

SCREW

25mm

Characteristics

Applications

T: 0161 483 5557

reisser.co.uk

product code

no. of pcs

10 x (10x10)

BLUEPLUG1000

1,000

BLUEPLUGOUTER

10,000

pack quantity

Ordering Info

10 x 1,000

T: +353 579 333 314

reisser.ie

35

SCREWS AND FIXINGS

Characteristics

RED PLUGS


STARTER DEPOT A quality display product to maximise the visual impact of the Reisser stock profile.

• Fully customisable to meet your requirements. • Hold the exact stock profile you need.

Can be filled with: Tubs Cutter Screws R2 Screws R2 Retinox Screws Decking Screws Drywall Screws Chunky Cases

the options are endless! Depth

31cm

Height Including Header

118cm 163cm

Starter Depots can be tailor made to meet your individual requirements. See examples below.

Product code (empty unit): MINIDEPOT

size (mm)

SHELF 4

SHELF 3 SHELF 2

SHELF 1

3.5 x 20

Boxes

Dimensions

packing pieces

3.5 x 25 3.5 x 30 3.5 x 40

8 Boxes of 200 8 Boxes of 200 8 Boxes of 200 12 Boxes of 200

4.0 x 25 4.0 x 30 4.0 x 40

12 Boxes of 200 12 Boxes of 200 12 Boxes of 200

4.0 x 50 4.0 x 60 4.0 x 70

6 Boxes of 200 6 Boxes of 200 4 Boxes of 200

4.5 x 50 4.5 x 60

6 Boxes of 200 4 Boxes of 200

4.5 x 70 4.5 x 80

4 Boxes of 200 4 Boxes of 200

5.0 x 40 5.0 x 50 5.0 x 60

6 Boxes of 200 6 Boxes of 200 4 Boxes of 200

5.0 x 70 5.0 x 80 5.0 x 100

4 Boxes of 200 4 Boxes of 200 4 Boxes of 200

6.0 x 100 6.0 x 150

4 Boxes of 100 2 Boxes of 100

size (mm)

3.5 x 20

SHELF 1

SHELF 3 SHELF 2

Dimensions

R2 Screw Example

SHELF 4

DISPLAY AND STORAGE

Cutter Screw Example

Mixed Example Boxes

Dimensions

3.5 x 25 3.5 x 30 3.5 x 40

8 Boxes of 200 8 Boxes of 200 8 Boxes of 200 12 Boxes of 200

4.0 x 25 4.0 x 30 4.0 x 40

12 Boxes of 200 12 Boxes of 200 12 Boxes of 200

4.0 x 50 4.0 x 60 4.0 x 70

6 Boxes of 200 6 Boxes of 200 4 Boxes of 200

4.5 x 50 4.5 x 60

6 Boxes of 200 4 Boxes of 200

4.5 x 70 4.5 x 80

4 Boxes of 200 4 Boxes of 200

5.0 x 40 5.0 x 50 5.0 x 60

6 Boxes of 200 6 Boxes of 200 4 Boxes of 200

5.0 x 70 5.0 x 80 5.0 x 100

4 Boxes of 200 4 Boxes of 200 4 Boxes of 200

6.0 x 100 6.0 x 150

4 Boxes of 100 2 Boxes of 100

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

packing pieces

REISSER R2 RETINOX SCREWS 4.0 x 40 5.0 x 40 5.0 x 100 6.0 x 60

8 4 4 4

Boxes Boxes Boxes Boxes

of of of of

200 200 200 100

REISSER CHUNKY CASE Containing:

3.5x40=200pcs, 4.0x30=200pcs, 4.0x40=200pcs, 4.0x50=120pcs, 5.0x50=100pcs, 5.0x60=200pcs,

5.0x100=200pcs. Includes 2x25 PZD Bits

REISSER TUBS will suit a range of popular sizes REISSER TRADE PACKS Containing:

4.0x25=600pcs, 4.0x30=600pcs, 4.0x40=600pcs, 4.0x50=600pcs, 5.0X40=550pcs, 5.0x50=500pcs, 5.0X60=450pcs, 5.0x80=400pcs.

Tables show list of recommended stock quantities and layout for each product type. Other configurations are available.

36

Boxes

size (mm)

packing pieces

SHELF 1

60cm

SHELF 2

Width

Choose your most popular products to fill your own bespoke Depot.

SHELF 4 SHELF3

Starter Depot

Unit Dimensions

reisser.ie


POINT OF SALE

TUB MERCHANDISING AND STORAGE Various options for the merchandising and storage of screw tubs. Quality display products to maximise the visual impact of the Reisser stock profile. Can be tailor made to individual requirements. Please ask for details.

Free Standing Display Unit Stocks up to

x 96tubs Product code (empty unit): FLOORSTAND

Tubs

POS Dumpbin Stocks up to

DISPLAY AND STORAGE

x 54 tubs

Product code (empty unit): 8221 TUBDISPLAY

Crate Mate Stocks up to

x 6 tubs

Product code (empty unit): SSC2

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

37


STORAGE

Crate Mate

CL E V E R S T OR AGE AND S TACK ING

38

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie


STORAGE SORTED!

Made in Italy

HIGH QUALITY SELF LOCKING STORAGE SYSTEM A practical and versatile system, Crate Mate offers a quality solution for the transporting and storage of tools, equipment and fixings in a professional and flexible way. Enhanced technical and structural features exceed alternative systems on the market making it an irreplaceable partner on the job!

Self Balancing Handle

1

Unique design handle distributes weight more evenly for more comfortable handling during transport. Stows flat when stacked for ease of use.

2 spring-loaded snap locks automatically lock cases together when placed on top of one another. Only one hand is needed. 4 feet on the bottom of the case guide the top-case easily into position for a secure connection.

STORAGE

2

Crate Mate

Patented Side Locking System

Larger Internal Volume

3

than most others on the market offering greater storage options to carry more tools and products.

Highest Quality German ABS

4

5

Manufactered with thicker profiles, more material and unique design features, the Crate Mate is tough, waterproof and robust to give years of protection to your tools.

Accessories The range of accessories allows you to build the system you need.

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie

39


Dimensions

Ordering Info Product

Description

W

D

H

Code

EAN SSC1 Crate Mate Case #1

464

5012331100101

SSC2

464

(kgs)

142

2.15

212

2.65

362

3.75

1060

8

SSC/CW Metal 4 wheel Base Plate 470 350 (with braking wheels) 5012331250004

110

3.3

F1

15

0.03

15

0.03

3

0.35

3

0.23

10

0.71

72

0.4

72

0.4

72

0.4

Crate Mate Case #2

335

Weight

335

5012331100200

SSC3

464

Crate Mate Case #3

335

5012331100309

SSC/WTT

600

Metal Trolley

with Handle

420

5012331662203

STORAGE

Crate Mate

Shaped Foam Sheet

400

300

(fits under all case lids)

5012331064243

F2

Flat Foam Sheet

400

(fits all cases)

300

5012331064304

P1

395

Lid Tool Panel

295

(fits all case lids)

5012331521609

P2

SSC3 Tool Panel

386

(for inside SSC3 only)

275

5012331210008

P22

SSC3 Tool Panel KIT

395

(2 x side foams and 2 x tool panels)

5012331064366

BL005

Moulded Insert for SSC1

400

295

300

(5 comps)

5012331520008

BL010

400

Moulded Insert for SSC1

(10 comps)

300

5012331521005

BL018 Moulded Insert for SSC1 400 300 (18 comps) 5012331521203

40

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie


Starter Sets

FULL STACK 1 GET ONE OF EACH SIZE UNIT

+TROLLEY

Crate Mate

INCLUDES; • SSC1 • SSC2 • SSC3 • SSC/WTT

FULL STACK 2

STORAGE

GET ONE OF EACH SIZE UNIT

+ BASE PLATE INCLUDES; • SSC1 • SSC2 • SSC3 • SSC/CW

T: 0161 483 5557 reisser.co.uk

T: +353 579 333 314 reisser.ie

41


Prefer to work online? visit our website at reisser.co.uk

• Easy to use • Fully interactive • Informative • Browse full product ranges • View latest promotions • Place orders online

Contact your sales representative to obtain your distributor login details. T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


POWER TOOL ACCESSORIES MASONRY Premium SDS-Plus & SDS-Max Chisels Powerspaten SDS-Plus & SDS-Max Chisels Zentro SDS-Plus Hammer Drills Speedster SDS-Plus Hammer Drills PowerBohr SDS-Plus Hammer Drills Rebar Cutters SDS-Plus Zentro SDS-Max Hammer Drills Prem Plus Masonry Drills Kombi TCT Multipurpose Drills Tile Drills & Pilot Drill Diamond Blades Diamond Core Drills & Accessories

HSS HSS Conical Drills & Countersinks HSS Cobalt Jobber Drills HSS Ti-N Coated Jobber Drills HSS Fully Ground Jobber Drills HSS Roll Forged Jobber Drills HSS Ti-N Coated Stub Drills / HSS Reduced Shank Blacksmith’s Drills HSS Long Series Drills HSS Extra Long Series Drills Chucks & Adaptors

44-64 44 45 46-47 48-49 50 51 52 53 54 55-56 57-62 62-64

65-77 65 66-67 68-69 70-71 72 73 74 75 76-77

SAWS AND HOLESAWS

78-93

Cobalt Bi-Metal Holesaws & Accessories Jigsaw Blades Sabre Saw Blades Oscillating Multi Tools Blades Circular Saw Blades

78-79 80-84 85-87 88-91 92-93

WOOD Shell Drill Countersinks / Light Duty Countersinks / Planer Blades Flat Bits 4-Tip Auger Bits Lewis Pattern Auger Bits Forstner Bits / Brad Point Drills

SCREWDRIVER BITS Torsion Driver Bits Torsion Impact Driver Bits Screwdriver Accessories

HACKSAW FRAMES Hacksaw Frames & Replacement Blades

94-98 94 95 96 97 98

99-101 99 100 101

102 102


1414

3939

DREBO PGM DREBO APPROVEDPGM MANUIFACTURED MANUIFACTURED APPROVED

Characteristics

SDS SDS max

PREMIUM CHISELS

plus

max

plusmax max

OR

SDS-plus shank

14

SDS plus

SDS-PLUS & SDS-MAX

SDS-max shank

39

Applications

20

DREBO MANUIFACTURED

Applications

20

concrete 22

• For breaking and working concrete, stone, brick and block using rotary hammers with the SDS-plus or SDS-max tool holder system.

German made

PGM APPROVED

aerated concrete natural stone

solid brick

• Retail packaging: SDS hanging clips

SDS

22 50

SDS-max max

plus

max

50

For continuous heavy 80duty work in concrete, masonry, brick or natural stone with SDS-max hammers up to 10Kg.

POWER TOOL ACCESSORIES

For Concrete and Masonry

Chisels

1 2 3 4

80

Dimensions

Advanced precision forging technology

description

Shot peened finish for additional strength and durability

Made in Germany

14

280 400 600

139728 139729 139730

Flat

22 22 20 22 22 24 32

24 24 24

280 400 600

139731 139732 139733

Spade/cold

50 22 40 50 24 50 50

50

360

139735

80

300

139736

115

350

139737

26

300

139734

32

300

139738

20 80 40 50 80 80 80 115 22 20

Spade/cold

DREBO MANUIFACTURED

PGM APPROVED

39

80 115 22 50

Hollow Gouge

26 26 26 26 50 80 32 32 32 26 32 80 24

Cranked Gouge (channel chisel)

SDS

SDS-plus max

plus

Dimensions description

Retail Clip

blade size overall (mm) length (mm)

product code

Bull Point

250

137051

Flat

250

137052

20 20

44

T: 0161 483 5557 22

24 24 24 32 40 Dimensions 40 40 26 40 24

max

For easy chiselling tasks in concrete, masonry, brick or natural stone when using an SDS-plus machine in the 2-4Kg class.

reisser.co.uk

product code

20 Point 20 20 20 26 32

Spade/cold

SDS plus

blade size overall (mm) length (mm) 26

Salt bath hardened for uniform heat treatment

Retail Clip

description 20 Hollow Gouge Spade/cold

32 40 115 26 115 115 115 22 24 32 115 40 50 24

Angled tile chisel

Retail Clip

blade size overall (mm) length (mm) 22

240

137053

40

200

137054

40

200

145287

40 80 115

115 333 314 T: +353 579

26

product code

reisser.ie


1414

3939

DREBO PGM DREBO APPROVEDPGM MANUIFACTURED MANUIFACTURED APPROVED

Characteristics

SDS SDS max

POWERSPATEN CHISELS

SDS-PLUS & SDS-MAX

plus

max

plusmax max

OR

SDS-plus shank

SDS plus

14 20

• For breaking and working concrete, stone, brick and block using rotary hammers with the SDS-plus or SDS-max tool holder system.

concrete

SDS

39

Applications

DREBO MANUIFACTURED

Applications

SDS-max shank

PGM APPROVED

aerated concrete natural stone

solid brick

• Retail packaging: SDS hanging clips

SDS-max max

plus

max

2 3

High quality 40Cr steel

Shot peened finish for additional strength and durability

14

DREBO MANUIFACTURED

PGM APPROVED

product code

POWERSPATEN SDS-max Bull point 30

Fully heat treated

SDS plus

Retail Clip

75 20 20 blade size overall description (mm) length (mm)

39

POWERSPATEN SDS-max Chisel

MAXP400

25

400

MAXC400

50

400

MAX50400

80

300

MAX80300

20 20

25

22

POWERSPATEN 22 30 SDS-plus Spade Chisel 50

40

50

POWERSPATEN 75 75 SDS-max Spade Chisel 80

20

400

80

45

SDS22

SDS-plus max

plus

30

30 Dimensions 20

max

50

For easy chiselling tasks in concrete, masonry, brick or natural stone when using an SDS-plus machine in the 2-4Kg class. 80 Dimensions

description

Retail Clip

blade size overall (mm) length (mm)

POWERSPATEN SDS-plus Bull point

product code

20 32 20

24 22 POWERSPATEN SDS-plus Spade Chisel 22

SBP250

20

250

SC250

40

250

SSC250

40 50 50 T: 0161 483 5557 115 80 80

20 26

25 25 26 description 32 30 30 32 POWERSPATEN SDS-plus Angled Tile Chisel 24 40 40 24

blade size (mm)

Retail Clip overall length product (mm) code

40

250

STC250

75

165

SWTC165

30

200

STCT200

40

250

26

POWERSPATEN SDS-plus Chisel

Chisels

1

Dimensions

reisser.co.uk

40 POWERSPATEN SDS-plus Extra Wide Tile Chisel 45 45 115 75 75 115

POWERSPATEN SDS-plus TCT Slotting Tool 30 30

25 333 314 T: +353 579 25 30 30

reisser.ie

45

POWER TOOL ACCESSORIES

For Concrete and Masonry

For continuous heavy duty work in concrete, masonry, brick or natural stone with SDS-max hammers up to 10Kg.


4-Cutter Tip, S-H Multi-Flute

ZENTRO PLUS

(mm)

total length (mm)

flute length (mm)

5.0

160

Standards

5.5

160

• PGM Approved.

6.0

• For drilling concrete and masonry using rotary hammers with the SDS-plus tool holder system.

1

For Concrete and Masonry

2 SDS-plus Zentro

ø

4-CUTTER HAMMER DRILL BIT WITH SDS-PLUS SHANK Applications

POWER TOOL ACCESSORIES

Dimensions

3

4

5

product code

quantity per outer carton

100

11550160

10

100

11555160

10

160

100

11560160

10

6.0

210

150

11560210

10

6.0

260

200

11560260

10

6.0

310

250

11560310

10

6.5

160

100

11565160

10

6.5

210

150

11565210

10

6.5

260

200

11565260

10

Rebar Resistant

7.0

160

100

11570160

10

• Thanks to the optimum 4 x 90° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel.

8.0

160

100

11580160

10

8.0

210

150

11580210

10

8.0

260

200

11580260

10

8.0

310

250

11580310

10

8.0

460

400

11580460

10

High Performance Tip

10.0

160

100

11510160

10

• Single piece carbide tip with unique cutting geometry and self-centring point.

10.0

210

150

11510210

10

10.0

260

200

11510260

10

10.0

310

250

11510310

10

10.0

450

400

11510450

10

Shot Peened finish

12.0

160

100

11512160

10

• Additional strength and durability.

12.0

210

150

11512210

10

12.0

260

200

11512260

10

12.0

310

250

11512310

10

S-H Flute

12.0

450

400

11512450

10

• Excellent dust removal characteristics.

14.0

160

100

11514160

10

14.0

210

150

11514210

10

14.0

310

250

11514310

10

Accurate

14.0

450

400

11514450

10

• PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

16.0

160

100

11516160

10

16.0

210

150

11516210

10

16.0

260

200

11516260

10

16.0

310

250

11516310

10

16.0

450

400

11516450

10

Self-centring solid carbide 4-cutter tip.

46

Retail Pack

T: 0161 483 5557

reisser.co.uk

S-H Multi-flute for fast dust removal.

T: +353 579 333 314

reisser.ie


14

DREBO MANUIFACTURED

plus

Applications max

4 X 90° symmetry for reinforced steel SDS-plus shank

LO

max

Characteristics

NG LI

spot drilling

circular drill holes low flute wear German made

FE

SDS

39

PGM APPROVED

long life

PGM approved

concrete

reinforced concrete

solid brick

hollow brick lime/sandstone natural stone

• Retail packaging: SDS hanging clip (5-16mm) or clear plastic tube (>16mm).

4-Cutter Tip, 4-Flute

3

4

5

• Thanks to the optimum 4 x 90° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel.

High Performance Tip • Multi-cutter tip with unique cutting geometry and self-centring point.

Shot Peened finish • Additional strength and durability.

4- flutes • Excellent dust removal characteristics.

Accurate

Dimensions

ø

Retail Pack

(mm)

total length (mm)

flute length (mm)

product code

quantity per outer carton

18.0

250

200

139450

10

18.0

450

400

139451

10

20.0

250

200

139452

10

20.0

450

400

139453

10

22.0

250

200

141326

10

22.0

450

400

139454

10

24.0

250

200

141327

10

24.0

450

400

139455

10

25.0

250

200

141328

10

25.0

450

400

139456

10

28.0

250

200

R11028260

10

28.0

450

400

R11028460

10

30.0

250

200

R11030260

10

30.0

450

400

R11030460

10

32.0

450

400

R11032460

10

SDS-plus Zentro

For Concrete and Masonry

2

Rebar Resistant

POWER TOOL ACCESSORIES

1

• PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

Multi cutter head with four cutting edges.

T: 0161 483 5557

reisser.co.uk

4-flute for fast dust removal.

T: +353 579 333 314

reisser.ie

47


Dimensions

SPEEDSTER

®

ADVANCED 2-CUTTER HAMMER DRILL BIT WITH SDS-PLUS SHANK Standards • PGM Approved. Applications

• For drilling concrete and masonry using rotary hammers with the SDS-plus tool holder system.

1

Self-centring point with enlarged rebar chamfers

2 For Concrete and Masonry

POWER TOOL ACCESSORIES

Speedster V-Plus

• Improved spot drilling and additional protection when encountering rebar.

Shot Peened finish • Additional strength and durability.

3

Vario KVS Flute • excellent power transfer and improved fracture resistance.

4

Accurate • PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

“Power Breaker” design pulverises concrete more efficiently for faster drilling speeds up to 25% faster drilling than conventional hammer bits.

48

T: 0161 483 5557

reisser.co.uk

ø

Retail Clip

(mm)

total length (mm)

working length (mm)

product code

outer quantities

110 160 110 160 210 310 110 160 210 260 110 160 210 260 310 460 110 160 210 260 310 110 160 210 250 110 160 210 260 310 460 600 1000 160 160 210 260 310 350 450 600 1000 160 210 310 160 210 260 310 450 600 1000 210 450

50 100 50 100 150 250 50 100 150 200 50 100 150 200 250 400 50 100 150 200 250 50 100 150 200 50 100 150 200 250 400 550 940 100 100 150 200 250 300 400 550 940 100 150 250 100 150 200 250 400 550 940 150 400

R1104110 R1104160 R1105110 R1105160 R1105210 R1105310 R11055110 R11055160 R11055210 R11055260 R1106110 R1106160 R1106210 R1106260 R1106310 R1106460 R11065110 R11065160 R11065210 R11065260 R11065310 R1107110 R1107160 R1107210 R1107250 R1108110 R1108160 R1108210 R1108260 R1108310 R1108460 R1108610 R11081000 R1109160 R11010160 R11010210 R11010260 R11010310 R11010360 R11010460 R11010610 R110101000 R11011160 R11011210 R11011310 R11012160 R11012210 R11012260 R11012310 R11012460 R11012610 R110121000 R11013210 R11013460

25 25 25 25 25 20 25 25 25 25 25 25 25 25 20 20 25 25 25 25 20 25 25 25 25 25 25 25 25 20 20 20 1 25 25 25 25 20 20 20 20 1 20 20 10 20 20 20 10 10 10 1 20 10

4.0* 4.0* 5.0 5.0 5.0 5.0 5.5 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 6.5 7.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 11.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 13.0 13.0

* 4mm diameters supplied with standard tip. 18.0-26.0mm not KVS flute IMPORTANT: When using a drill bit 450mm or above it is recommended to drill a pilot hole of at least 140mm with a short drill bit of the same diameter. T: +353 579 333 314

reisser.ie


14

DREBO MANUIFACTURED

PGM APPROVED

39

Characteristics

SDS max

plus

Applications max

chisel shaped head SDS-plus shank top quality tool

German made

concrete

PGM approved

hollow brick

aerated concrete

solid brick

natural stone lime/sandstone

• Retail packaging: SDS hanging clip.  • Bulk packaging: ProBox.

Dimensions

(mm)

total length (mm)

working length (mm)

product code

outer quantities

160 210 260 310 450 600 1000 260 160 210 260 310 450 600 1000 210 200 250 300 450 600

100 150 200 250 400 550 940 200 100 150 200 250 400 550 940 150 150 200 250 400 550

R11014160 R11014210 R11014260 R11014310 R11014460 R11014610 R110141000 R11015260 R11016160 R11016210 R11016260 R11016310 R11016460 R11016610 R110161000 R11017210 R11018210 R11018260 R11018310 R11018460 R11018610

20 20 20 10 10 10 1 10 10 10 10 10 10 10 1 10 10 10 10 10 10

14.0 14.0 14.0 14.0 14.0 14.0 14.0 15.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 17.0 18.0 18.0 18.0 18.0 18.0

ø

Retail Clip

(mm)

total length (mm)

working length (mm)

1000 200 200 300 450 600 1000 250 300 450 600 1000 250 450 250 300 450 600 1000 250 450

940 150 150 250 400 550 940 200 250 400 550 940 200 400 200 250 400 550 940 200 400

18.0 19.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 25.0 26.0 26.0

product code

outer quantities

R110181000 R11019210 R11020210 R11020310 R11020460 R11020610 R110201000 R11022260 R11022310 R11022460 R11022610 R110221000 R11024260 R11024460 R11025260 R11025310 R11025460 R11025610 R110251000 R11026260 R11026460

1 10 10 10 10 10 1 10 10 10 10 1 10 10 10 10 10 10 1 10 10

Speedster V-Plus

ø

Retail Clip

SPEEDSTER - ProBox Multi Packs Dimensions

ø

(mm)

5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.5 6.5 6.5 7.0 7.0 7.0

total length (mm) 110 160 110 160 210 110 160 210 110 160 210 110 160 210

ProBox

working length product (mm) code 50 100 50 100 150 50 100 150 50 100 150 50 100 150

T: 0161 483 5557

R110E5110 R110E5160 R110E55110 R110E55160 R110E55210 R110E6110 R110E6160 R110E6210 R110E65110 R110E65160 R110E65210 R110E7110 R110E7160 R110E7210

reisser.co.uk

Dimensions

quantity per ProBox 10 10 10 10 10 10 10 10 10 10 10 10 10 10

ø

(mm)

8.0 8.0 8.0 8.0 10.0 10.0 12.0 12.0 14.0 14.0 16.0 16.0

total length (mm) 110 160 210 260 160 210 160 210 160 210 160 210

ProBox

working length product (mm) code 50 100 150 200 100 150 100 150 100 150 100 150

T: +353 579 333 314

R110E8110 R110E8160 R110E8210 R110E8260 R110E10160 R110E10210 R110E12160 R110E12210 R110E14160 R110E14210 R110E16160 R110E16210

reisser.ie

quantity per ProBox 10 10 10 10 10 10 10 10 10 10 10 10

49

POWER TOOL ACCESSORIES

Dimensions


14

DREBO MANUIFACTURED

SDS

PowerBohr

max

2-CUTTER HAMMER DRILL BIT

PGM APPROVED

Characteristics plus

max

chisel shaped head SDS-plus shank

Standards

39

PGM approved

Applications

• PGM Approved. Applications • For drilling concrete and masonry using rotary hammers with the SDS-plus tool holder system

concrete

aerated concrete

solid brick

hollow brick

natural stone lime/sandstone

• Retail packaging: SDS hanging clip.

POWER TOOL ACCESSORIES

PowerBohr

For Concrete and Masonry

1

Accurate • PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

2

Secure • High performance brazing holds the tip firmly in the shank.

3

Tough • High grade chromium steel body.

4

Long Life • Modern surface treatment strengthens the shank and helps protect against breakage.

Dimensions

ø

(mm)

total length (mm)

450 600 1000 210 260 310 450 600 1000 210 310 450 600 1000 260 450 600 1000 260 450 260 450 600 1000

16.0 16.0 16.0 18.0 18.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0

50

Retail Clip

working length product (mm) code 400 550 950 150 200 250 400 550 950 150 250 400 550 950 200 400 550 950 200 400 200 400 550 950

T: 0161 483 5557

S16450 S16600 S161000 S18210 S18260 S18310 S18450 S18600 S181000 S20210 S20310 S20450 S20600 S201000 S22260 S22450 S22600 S221000 S24260 S24450 S25260 S25450 S25600 S251000 reisser.co.uk

quantity per outer carton 10 10 n/a 10 10 10 5 10 n/a 5 10 5 5 n/a 5 5 5 n/a 5 5 5 5 5 n/a

Dimensions

ø

(mm)

total length (mm)

160 110 160 110 160 210 110 160 210 260 310 160 210 260 110 160 210 160 210 260 310 450 600 160 210 260 310 450 600 1000 160 210 260 310 450 600 1000 160 210 260 310 450 600 160 210 260 310

4.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0

Retail Clip

working length product (mm) code 100 50 100 50 100 150 50 100 150 200 250 100 150 200 50 100 150 100 150 200 250 400 550 100 150 200 250 400 550 950 100 150 200 250 400 550 950 100 150 200 250 400 550 100 150 200 250

T: +353 579 333 314

S4160 S5110 S5160 S55110 S55160 S55210 S6110 S6160 S6210 S6260 S6310 S65160 S65210 S65260 S7110 S7160 S7210 S8160 S8210 S8260 S8310 S8450 S8600 S10160 S10210 S10260 S10310 S10450 S10600 S101000 S12160 S12210 S12260 S12310 S12450 S12600 S121000 S14160 S14210 S14260 S14310 S14450 S14600 S16160 S16210 S16260 S16310 reisser.ie

quantity per outer carton 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 n/a 20 15 20 20 20 15 n/a 15 15 15 15 10 15 15 10 15 15


REBAR CUTTERS

SDS-plus SHANK ROTARY ONLY

Characteristics

Applications

rotary only

in-situ reinforcing

• Retail packaging: PVC Tube.

Dimensions

ø

total flute length length (mm) (mm) (mm)

Retail Tube speed range product (rpm) code

qty per tube

Applications

10.0

300

85

430 - 530

RBC10

1

• For the in-situ drilling of reinforcing bars in steel reinforced concrete structures.

12.0

300

85

430 - 530

RBC12

1

14.0

300

85

430 - 530

RBC14

1

16.0

300

85

320 - 400

RBC16

1

18.0

300

85

320 - 400

RBC18

1

20.0

300

85

320 - 400

RBC20

1

22.0

300

85

260 - 300

RBC22

1

24.0

300

85

260 - 300

RBC24

1

25.0

300

85

260 - 300

RBC25

1

1

Carbide Tip • High quality Swedish tungsten carbide tips.

Efficient Design

1

• Access holes/flutes for clearing debris.

For Metal

3

Sandblast Finish

2

• Rust resistant.

3

4

SDS-plus shank

• Select the appropriate drilling speed and reconnect the machine. • Place the tip of the rebar cutter in the hole, so it sits on top of the rebar • Apply firm (not heavy) pressure, and commence drilling • When the cutter has passed through the rebar, withdraw the bit from the hole and disconnect the machine • Remove the rebar cutter and revert back to the SDS hammer bit • Switch hammer action back on, and reconnect the machine • Select the appropriate drilling speed • Insert the drill into the hole, and recommence hammer drilling to the required depth

CUTTING REBAR CAN ADVERSELY AFFECT THE STRENGTH OF THE STRUCTURE INVOLVED. Sole responsibility for the consequences of cutting rebar lie with the user – please consult with the project engineer/architect if you have any concerns

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

51

POWER TOOL ACCESSORIES

2

Rebar Cutters

INSTRUCTIONS FOR USE • Hammer drill with an SDS bit until rebar is encountered • Disconnect the machine, switch off hammer action and remove the hammer bit from the chuck • Select rotary mode (hammer off), and insert the rebar cutter into the chuck


14

plus

DREBO MANUIFACTURED

PGM APPROVED

39

Characteristics

SDS max

plus

ZENTRO MAX

max SDS-max shank German made

PGM approved

Applications

4-CUTTER HAMMER DRILL BIT WITH SDS-MAX SHANK concrete

reinforced concrete

solid brick

hollow brick lime/sandstone natural stone

• Retail packaging: Clear plastic hanging tube.

Standards • PGM Approved.

Dimensions

Applications • For drilling concrete and masonry using rotary hammers with the SDS-max tool holder system.

3

Rebar Resistant

3

Reinforced Core

• Revised tip design incorporating rebar chamfers.

For Concrete and Masonry

POWER TOOL ACCESSORIES

SDS-max Zentro

• Ensures low vibration and exceptional fracture resistance.

3

Flute Geometry • The high-volume flute geometry ensures the optimum removal of drilling dust.

4

Multi-Value Flute • Alternate flute width reduces friction for faster drilling speeds.

5

Accurate • PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

2-Cutter head up to ø15mm

4-Cutter head from

ø16mm

T: 0161 483 5557

total length (mm)

340 540 340 540 340 540 920 1320 340 540 920 320 520 920 1320 320 520 320 520 320 520 920 1320 520 370 570 370 570 370 570 370 570 670 370 570 370 570 570 570

*12.0 *12.0 *14.0 *14.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 22.0 22.0 24.0 24.0 25.0 25.0 25.0 25.0 26.0 28.0 28.0 30.0 30.0 32.0 32.0 35.0 35.0 35.0 38.0 38.0 40.0 40.0 45.0 50.0

working length (mm)

product code

200 400 200 400 200 400 800 1200 200 400 800 200 400 800 1200 200 400 200 400 200 400 800 1200 400 250 450 250 450 250 450 250 450 550 250 450 250 450 450 450

139653 139654 139656 139657 139660 139661 142693 1601320 139662 139663 180920 139664 139665 139666 145312 139667 139668 139670 139671 139672 139673 139674 145314 260540 139675 139676 139678 139679 139680 139681 139683 139684 139685 139686 139687 139688 139689 450540 500570

* = Tip is two cutter only IMPORTANT: When using a drill bit 450mm or above it is recommended to drill a pilot hole of at least 140mm with a short drill bit of the same diameter.

MVF Flute.

52

ø

(mm)

Retail Tube

reisser.co.uk

T: +353 579 333 314

reisser.ie


Characteristics

US PL EM RY PR N SO MA ILL DR T BI

OR

m

.0 m ø==1600mm

PREM PLUS

L

c

1p

E

STON

straight shank 4-12mm

ICK

BR TE RE

NC

CO

5

0

3

3

P

5

4

3

3

5

3

0

5

5

PGM approved

Applications

MASONRY DRILL BIT WITH STRAIGHT SHANK concrete

Standards

three flat shank 14-25mm

0

10

0 P6

aerated concrete

solid brick

natural stone

• Retail packaging: PVC wallet.

• PGM Approved.

1

For Concrete and Masonry

2

3

Secure • High temperature brazing holds the tip firmly in the shank.

Efficient Design • Deep twin flute minimises the risk of clogging in damp masonry and quickly channels dust for increased efficiency.

Tough • High grade chromium steel body.

4

Accurate • PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

ø

(mm)

total length (mm)

working length product (mm) code

quantity per outer carton

4.0

85

45

PP4085

1

4.0

150

110

PP40150

1

5.0

90

50

PP5090

1

5.0

150

110

PP50150

1

5.5

90

50

PP5590

1

5.5

150

110

PP55150

1

6.0

100

60

PP60100

1

6.0

150

110

PP60150

1

6.0

200

150

PP60200

1

6.0

400

340

PP60400

1

6.5

100

60

PP65100

1

6.5

150

110

PP65150

1

7.0

100

60

PP70100

1

7.0

150

110

PP70150

1

8.0

120

80

PP80120

1

8.0

150

110

PP80150

1

8.0

200

150

PP80200

1

8.0

400

340

PP80400

1

10.0

150

110

PP10150

1

10.0

200

150

PP10200

1

10.0

400

340

PP10400

1

12.0

150

90

PP12150

1

12.0

200

150

PP12200

1

12.0

400

340

PP12400

1

14.0

150

90

PP14150

1

14.0

200

140

PP14200

1

14.0

400

340

PP14400

1

16.0

150

90

PP16150

1

16.0

400

340

PP16400

1

20.0

200

140

PP20200

1

20.0

400

340

PP20400

1

22.0

400

340

PP22400

1

25.0

400

340

PP25400

1

Prem Plus

• For drilling concrete and masonry with impact drilling machines with a three jaw chuck.

Retail Wallet

POWER TOOL ACCESSORIES

Dimensions

Applications

IMPORTANT: When using 400mm long masonry drills ≤ø16.0mm, it is recommended to pre-drill a pilot hole using a 150mm long drill bit of the same diameter. T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

53


Characteristics I

MB KO

LTI SE MU RPO BIT PU ILL R D m .0 m ø==1700mm

KOMBI

L

c

1p

rotary only

AL MET

5

TCT MULTIPURPOSE DRILLS

aerated concrete

0

3

5

3

4

6

3

1

8

2

k co.u

solid brick

Applications • For the rotary drilling of aerated and non-reinforced concrete, masonry, ceramic tiles, plastic, wood, aluminium and steel sheets and profiles.

Metal Concrete 

3

For Masonry     Tile

Kombi

natural stone

Dimensions

• PGM Approved.

POWER TOOL ACCESSORIES

Applications

ww

4

Tip Geometry • Diamond cut cross ground tip for easy penetration into different materials.

Secure • High temperature brazing holds the tip securely in the shank.

Tough • High grade chromium steel body.

ceramic tile

aluminium

ø

(mm)

total length (mm)

Retail Wallet

working length product (mm) code

quantity per wallet

4.0

150

110

K40150

1

5.0

95

50

K5095

1

5.0

150

110

K50150

1

5.5

95

50

K5595

1

5.5

150

110

K55150

1

6.0

100

60

K60100

1

6.0

150

110

K60150

1

6.0

200

150

K60200

1

6.5

100

60

K65100

1

6.5

150

110

K65150

1

7.0

100

60

K70100

1

7.0

150

110

K70150

1

8.0

150

110

K80150

1

8.0

200

150

K80200

1

10.0

150

110

K10150

1

10.0

200

150

K10200

1

12.0

150

110

K12150

1

12.0

200

150

K12200

1

Accurate • PGM approved where certified- your guarantee of precisely drilled holes for a stable anchor fixing.

WM

The PGM mark is your guarantee of precisely drilled holes for a stable anchor fixing

Factory Inspected PGM approved

54

metal

• Packaging: Retail wallet.

Standards

2

PGM approved

8

ser. eis w.r

0

10

0 xKx7

4

WITH STRAIGHT SHANK

1

straight shank

D

O WO ICK

BR

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


Characteristics

SPEAR TIP

IC

M RA

L

RIL

ED

TIL

CE

TCTLE & S TI LAS BIT G RILL D

m

.0 m ø==880mm

CERAMIC TILE & GLASS DRILL

L

rotary only

c 1p

CROSS GROUND TIP

GLA

5

0

3

3

5

D8

SP

4

3

5

5

8

6

7

2

Applications

k co.u

ser. eis w.r

ww

Applications • For the rotary drilling of glass and ceramic tile. Not recommended for use with harder, porcelain tiles.

glass

Visit www.reisser.co.uk for instructions on use

2

Tip Geometry • Cross ground tungsten carbide tip.

Sandblast Finish • Rust resistant.

Lubrication reduces heat and greatly increases service life. Please use a cordless power tool and follow the instructions at www.reisser.co.uk

ceramic tile

• Packaging: Retail wallet.

Dimensions

ø

(mm)

Retail Wallet

total length product (mm) code

quantity per wallet

3.0

60

SPD3

1

4.0

60

SPD4

1

5.0

70

SPD5

1

6.0

75

SPD6

1

6.5

80

SPD65

1

7.0

80

SPD7

1

8.0

80

SPD8

1

10.0

100

SPD10

1

12.0

100

SPD12

1

Spear Point & Premium TCT

For Ceramic Tile

1

wet or dry use

IC AM CER TILE

SS

Characteristics L

RIL

D SS

M

m

m 0.0 ø==915mm

TCT TILE & GLASS DRILLS

L

pc

1

GLA

SS

5

0

rotary only

IN ELA RC PO TILE E 3 D RA ≤G

IC AM CER TILE

3

3

10

PTD

5

4

3

5

5

8

7

7

wet or dry use

three flat shank ≥8mm

1

Applications

k co.u

ser. eis w.r

ww

TILE & GLASS

PREMIUM

LA

&G

IU IUM EM PR LE & S TI LAS BIT G RILL D

EM

PR

E TIL

Applications • For the rotary drilling of glass and ceramic tiles, as well as porcelain tiles up ≤ PEI Grade 3. Visit www.reisser.co.uk for instructions on use

glass

ceramic tile

porcelain tile ≤ grade 3

• Packaging: Retail wallet.

For Porcelain & Ceramic

1

Tip Geometry • High grade, split point tungsten carbide tip.

Dimensions

ø

(mm)

2

Shank Type • Three flat shank to prevent slippage (sizes ≥8mm).

Lubrication reduces heat and greatly increases service life. Please use a cordless power tool and follow the instructions at www.reisser.co.uk

T: 0161 483 5557

reisser.co.uk

Retail Wallet

total length shank product (mm) type code

quantity per wallet

3.0

51

PTD3

1

4.0

51

PTD4

1

5.0

51

PTD5

1

6.0

57

PTD6

1

6.5

57

PTD65

1

7.0

57

PTD7

1

8.0

57

PTD8

1

10.0

95

PTD10

1

12.0

95

PTD12

1

T: +353 579 333 314

reisser.ie

55


Characteristics

DIAMOND

PORCELAIN TILE DRILL

rotary only

wet or dry use

Applications

Applications • For the rotary drilling of hard porcelain tiles ≤PEI Grade 5. Visit www.reisser.co.uk for instructions on use ceramic tile

Diameters 5.0 – 16.0mm

Diamond Tile Drills

For Porcelain Tile

1

2

3

porcelain tile ≤ grade 5

glass

plastic CRP

• Packaging: Retail tube.

Dimensions

Vacuum Brazed Diamond • For superior heat resistance.

ø

(mm)

Integrated Wax Lubricant • To aid cooling when dry cutting.

Shank Type • Non-slip hex shank.

Retail Tube

total length product (mm) code

quantity per tube

5

67

TDD5

1

6

67

TDD6

1

7

67

TDD7

1

8

80

TDD8

1

10

80

TDD10

1

12

80

TDD12

1

16

80

TDD16

1

Diameters 20.0 - 25.0mm

For Porcelain Tile

PORCELAIN TILE

1 2

3

TCT Pilot Drill • To aid centring on larger sizes.

Dimensions

ø

Vacuum Brazed Diamond • For superior heat resistance.

(mm)

Retail Tube

total length product (mm) code

quantity per tube

20

80

TDD20

1

25

80

TDD25

1

Shank Type • Non-slip hex shank. Lubrication reduces heat and greatly increases service life. Please use a cordless power tool and follow the instructions at www.reisser.co.uk

TCT PILOT DRILL FOR 20mm & 25mm DIAMOND TILE DRILLS Dimensions description

Pilot Drill for 20/25mm

56

T: 0161 483 5557

reisser.co.uk

Retail Tube total length (mm)

product code

quantity per tube

90

TDDPILOT

1

T: +353 579 333 314

reisser.ie


Technical Data

DIAMOND BLADES

EN 13236

GENERAL PURPOSE COLD SINTERED Standards

segmented

performance

standard

wet/dry use

Applications

• EN13236.

Applications • For cutting medium density materials such as concrete, common brick and paving slabs.

concrete

natural stone

solid brick

hollow brick

paving slabs

For Concrete and Masonry

• Packaging: Colour box with euro hanger.

1 2 3

Cold Sintered

7mm Segment Height

Meets the requirements of EN13236

Dimensions

Specification

bore segment height (mm) (mm) (mm)

ø ø

ø

product code

speed rating

115

22.23

7

CSE115

80m/s

230

22.23

7

CSE230

80m/s

300

20.00

7

CSE300

100m/s

DIAMOND BLADES

EN 13236

GENERAL PURPOSE PREMIUM COLD SINTERED

performance

standard

wet/dry use

Applications

DIAMOND TOOLS

Standards

segmented

• EN13236.

Applications • Cutting medium density materials such as concrete, common brick and paving slabs. Long life 10mm turbo segments, pro quality.

concrete

natural stone

solid brick

hollow brick

paving slabs

• Packaging: Colour box with euro hanger.

For Concrete and Masonry

Dimensions 1

Cold Sintered

2

10mm Premium quality oblique turbo segment

3

T: 0161 483 5557

Meets the requirements of EN13236

reisser.co.uk

Blades

Technical Data

Specification

ø

ø

115

22.23

10

OTS115

80m/s

125

22.23

10

OTS125

80m/s

230

22.23

10

OTS230

80m/s

300

20.00

10

OTS300

100m/s

350

20.00

10

OTS350

100m/s

350

25.40

10

bore segment height product (mm) (mm) (mm) code

bushing ring (mm)

OTS350254

T: +353 579 333 314

20

reisser.ie

speed rating

100m/s

57


Technical Data

DIAMOND BLADES

EN 13236

GENERAL PURPOSE PREMIUM LASER WELDED Standards

segmented

performance

standard

double laser welded wet/dry use

Applications

• EN13236.

Applications • Cutting medium density materials such as concrete, common brick and paving slabs. Long life 12mm* double laser welded segments, pro quality.

concrete

natural stone

solid brick

hollow brick

paving slabs

• Packaging: Colour box with euro hanger.

For Concrete and Masonry

Dimensions

Specification

1

Double laser welded

bore segment height product (mm) (mm) (mm) code

ø

ø

2

12mm Premium quality segment*

115

22.23

10

DLWGP115

80m/s

125

22.23

12

DLWGP125

80m/s

230

22.23

12

DLWGP230

80m/s

300

20.0

12

DLWGP300

100m/s

350

20.0

12

DLWGP350

100m/s

350

25.4

12

400

25.4

12

DLWGP400

100m/s

450

25.4

12

DLWGP450

100m/s

3

Meets the requirements of EN13236

*10mm segment height on ø115mm

bushing ring (mm)

DLWGP350254

20

speed rating

100m/s

DIAMOND BLADES

EN 13236

HARD MATERIALS & STEEL PREMIUM HOT SINTERED Standards

Applications • Cutting high density materials such as scaffolding poles, reinforced concrete, engineering brick and Indian stone. Long life 10mm continuous rim turbo segments for less surface chipping, pro quality.

58

continuous rim

performance

standard

wet/dry use

Applications

• EN13236.

construction steel

granite

reinforced concrete hard concrete engineering brick indian stone

1

Hot Sintered

2

10mm Continuous turbo premium quality segment

3

T: 0161 483 5557

Meets the requirements of EN13236

reisser.co.uk

clay roof tiles

• Packaging: Colour box with euro hanger.

Dimensions

For Concrete and Masonry

DIAMOND TOOLS

Blades

Technical Data

Specification

ø

ø

115

22.23

10

HSCR115

80m/s

125

22.23

10

HSCR125

80m/s

230

22.23

10

HSCR230

80m/s

300

20.0

10

HSCR300

100m/s

350

20.0

10

HSCR350

100m/s

350

25.4

10

bore segment height product (mm) (mm) (mm) code

bushing ring (mm)

HSCR350254

T: +353 579 333 314

20

reisser.ie

speed rating

100m/s


Technical Data

DIAMOND BLADES

EN 13236

HARD MATERIALS PREMIUM LASER WELDED Standards

segmented

performance

standard

double laser welded wet/dry use

Applications

• EN13236.

Applications • Cutting hard materials such as reinforced concrete, Aged (well cured) concrete, Indian stone, hard pavers, engineering brick, paving slabs, hard roof tiles and steel scaffolding poles and lintels. Long life 12mm segment, pro quality, double laser welded.

granite

reinforced concrete hard concrete engineering brick indian stone

• Packaging: Colour box with euro hanger.

Dimensions

For Concrete and Masonry

clay roof tiles

Specification

1

Double laser welded

bore segment height product (mm) (mm) (mm) code

ø

ø

2

12mm Premium quality segment

300

20.0

12

DLWHM300

100m/s

350

20.0

12

DLWHM350

100m/s

350

25.4

12

400

25.4

12

DLWHM400

100m/s

450

25.4

12

DLWHM450

100m/s

3

Meets the requirements of EN13236

bushing ring (mm)

DLWHM350254

20

speed rating

100m/s

DIAMOND BLADES

EN 13236

ASPHALT & ABRASIVE MATERIALS PREMIUM LASER WELDED

segmented

performance

standard

double laser welded wet/dry use

Applications

DIAMOND TOOLS

Standards

Blades

Technical Data

• EN13236.

For Asphalt and Sandstone

Applications • Cutting soft and abrasive materials such as asphalt, green concrete, soft sandstone and lignicite blocks. Long life 10mm segments with undercut protection, pro quality, double laser welded.

1 2 3 4

T: 0161 483 5557

Laser Welded

10mm Segment Height

Undercut protection

Meets the requirements of EN13236

reisser.co.uk

asphalt

sandstone

green concrete lignicite block

• Packaging: Colour box with euro hanger.

Dimensions

ø

Specification

bore segment height product (mm) (mm) (mm) code

bushing ring (mm)

ø

speed rating

300 20.0

10

DLWAAM300

100m/s

350 20.0

10

DLWAAM350

100m/s

350 25.4

10

400 25.4

10

DLWAAM400

100m/s

450 25.4

10

DLWAAM450

100m/s

DLWAAM350254

T: +353 579 333 314

20

reisser.ie

100m/s

59


Technical Data

DIAMOND BLADES

EN 13236

MORTAR RAKER TWIN GANG – SEMI HOT SINTERED Standards

segmented

performance

standard

wet/dry use

Applications

• EN13236.

Applications • For raking out mortar prior to re-pointing. • Faster cutting and creates less dust than a traditional mortar raker.

mortar raking

• Packaging: Colour box with euro hanger.

2 3

Semi-Hot Pressed

10mm Segment Height

Meets the requirements of EN13236

Dimensions

Specification

bore segment height (mm) (mm) (mm)

ø ø

ø

product code

speed rating

115

22.23

10

DMR115

80m/s

125

22.23

10

DMR125

80m/s

Technical Data

DIAMOND BLADES MORTAR RAKER COLD SINTERED

segmented

performance

wet/dry use

Applications

Applications • For raking out mortar prior to re-pointing. mortar raking

• Packaging: Colour box with euro hanger.

For Mortar

DIAMOND TOOLS

Mortar Rakers

For Mortar

1

60

T: 0161 483 5557

1

Cold Sintered

2

7mm Segment Height

3

7mm Segment thickness

reisser.co.uk

Dimensions

ø ø

ø

115

22.23

125

22.23

bore segment height (mm) (mm) (mm)

Specification product code

speed rating

7

CSMR115

80m/s

7

CSMR125

80m/s

T: +353 579 333 314

reisser.ie


Technical Data

DIAMOND BLADES

EN 13236

PORCELAIN & CERAMIC HOT SINTERED Standards

segmented

performance

standard

wet/dry use

Applications

• EN13236.

Applications • For the dry cutting of Porcelain and hard ceramic tiles using a mini grinder.

ceramic tile

porcelain tile

• Packaging: Colour box with euro hanger.

3

10mm Thin Turbo segment Height

Dimensions

ø ø

ø

115

22.23

125

22.23

Specification

bore segment height (mm) (mm) (mm)

product code

speed rating

10

HSPTC115

80m/s

10

HSPTC125

80m/s

Meets the requirements of EN13236

Tile Blades

2

Hot Sintered

Technical Data

DIAMOND BLADES

EN 13236

PORCELAIN & CERAMIC SEMI-HOT SINTERED Standards

continuous rim

performance

standard

wet use only

Applications

• EN13236.

Applications • For the wet cutting of Porcelain and hard ceramic tiles in tile cutting machines.

ceramic tile

porcelain tile

• Packaging: Colour box with euro hanger.

For Tile

1 2

3

T: 0161 483 5557

Dimensions Semi-Hot Sintered

7mm Thin Continuous Segment Height

Meets the requirements of EN13236

reisser.co.uk

Specification

ø

ø

110

22.23

7

CRT110

180

25.4

7

CRT180

200

25.4

7

CRT200

22.23

80m/s

250

25.4

7

CRT250

80m/s

bore segment height product (mm) (mm) (mm) code

T: +353 579 333 314

bushing ring (mm)

speed rating 80m/s

16/22.23 80m/s

reisser.ie

61

DIAMOND TOOLS

For Tile

1


Technical Data

DIAMOND BLADES CONCRETE CUP GRINDING WHEEL

segmented

performance

wet/dry use

Applications

Applications • For dry grinding and levelling concrete surfaces. Double row. concrete

• Packaging: Plain white box.

DIAMOND TOOLS

Concrete Grinding

For Concrete

Dimensions 1

Silver Soldered

2

7mm Segment Height

ø ø

ø

115

22.23

Specification

bore segment height (mm) (mm) (mm) 7

product code

speed rating

DRCGW115

80m/s

Technical Data

DIAMOND CORE DRILLING SYSTEM COMPONENTS

segmented

performance

laser welded

dry use only

rotary only

Applications

Applications • For the dry drilling of holes in medium density materials such as concrete, brick and aerated concrete blocks.

concrete

natural stone

solid brick

hollow brick

• Packaging: Clear plastic tube with hanger (up to ø82mm).

Select shank configuration (SOS-plus or Hex) and length required for the task.

62

T: 0161 483 5557

If additional length is required, utilise an extension shank.

reisser.co.uk

Select required core between 32mm and 152mm diameter (22mm & 28mm have integral hex shanks for use freehand).

If pre-drilling with a hammer bit, use a 12mm diameter drill and use the pilot rod to centre the core bit during the drilling operation. Alternatively, use the multipurpose pilot drill and use without pre-drilling.

T: +353 579 333 314

reisser.ie


DIAMOND CORE DRILL ACCESSORIES Dimensions length (mm)

1/2” BSP Core Adaptor

88

CAHEX88

12.5mm HEX

1

1/2” BSP Core Adaptor

240

CAHEX240

12.5mm HEX

1

1/2” BSP Core Adaptor

115

CASDS115

SDS-plus

1

1/2” BSP Core Adaptor

240

CASDS240

SDS-plus

1

1/2” BSP(F) - 1/2” BSP(M) Extension Shank

250

EXT240

1/2” BSP

1

A-Taper Pilot Drill c/w Multipurpose Tip

210

PILOT12210

A-TAPER

1

A-Taper Pilot Rod

210

PILOTROD225

A-TAPER

1

Taper Drift

75

TD

n/a

1

12.0

8.0

T: 0161 483 5557

reisser.co.uk

product code drive

tube qty

T: +353 579 333 314

Core Drill Accessories

ø

description (mm)

DIAMOND TOOLS

ø

Specification

reisser.ie

63


Technical Data

DIAMOND CORE DRILLS

segmented

performance

dry use only

rotary only

laser welded

Applications

Applications • For the dry drilling of holes in medium density materials such as concrete, brick and aerated concrete blocks. concrete

natural stone

solid brick

hollow brick

• Packaging: Clear plastic tube with hanger (up to ø82mm).

9.5mm Hex Drive 1

Hex Drive

Retail Pack

ø

For Concrete and Masonry

segment lgth height product (mm) (mm) (mm) code description

2

Slotted Barrel

22 300 10 LWDC22 sintered 28 300 10 LWDC28 laser welded

Dimensions

cont. segment slotted barrel turbo segmented slotted barrel

Retail Pack

ø

segment lgth height product (mm) (mm) (mm) code description

For Concrete and Masonry

64

configuration

1/2” BSP

Core Drills DIAMOND TOOLS

Dimensions

T: 0161 483 5557

1

1/2” BSP

2

Slotted Barrel

reisser.co.uk

28 300 10 LWDC28 32 175 10 LWDC32 38 175 10 LWDC38 48 175 10 LWDC48 52 175 10 LWDC52 65 175 10 LWDC65 78 175 10 LWDC78 82 175 10 LWDC82 91 175 10 LWDC91 107 175 10 LWDC107 117 175 10 LWDC117 127 175 10 LWDC127 152 175 10 LWDC152 T: +353 579 333 314

laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded laser welded

configuration turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel turbo segmented slotted barrel

reisser.ie


Type

Type

Type

H

Ti

U-TL

Type

HSS 3-FLUTEDWCOUNTERSINKS 118° DINTechnical DINData 135° DIN

DIN

38

340

SS

HSS-E

345

1869

HCS

DIN

Co5

90°

Applications

1897

• Packaging: Retail tube.

DIN

60°335

7483G 90° tip angle

type C

120° all wood

sheet metal

HSS DEBURRING COUNTERSINKS 118°

• For countersinking free of shattering and burring. • Low cutting speed and cooling liquid will increase lifetime and improve working results in metal.

60°

90° tip angle

Applications

120° straight shank

sheet metal

plastic

• Suitable for burr removal and the cleaning up of drilled holes. • Designed for optimum and clean chip removal through the transverse hole. • Cylindrical shank. • Low cutting speed and cooling liquid will increase lifetime and improve working results.

Retail Tube

Dimensions

ø

90°

plastic

straight shank

(mm)

135°

Technical Data

total shank length shank product (mm) (mm) type code

ø

Dimensions

Retail Tube

123005

nominal shank shank size (mm) (mm) type

product code

10

123006

No.1

2-5

6

123482

63

10

123007

No.2

5-10

8

123483

67

10

123698

No.3

10-15

10

123484

6.3

45

5

123695

8.3

50

6

123004

10.4

50

6

123696

12.4

56

8

16.5

60

20.5

25.0

HSS STEP DRILL BITS Technical Data

ø

HSS CONE CUTTERS Technical Data

Applications

OR straight shank

ø

Countersinks

IN

Technical Data

HSS

pe

N

HSS CONICAL DRILLS AND COUNTERSINKS

Applications

OR

three flat shank

sheet metal

plastic

straight shank

• For drilling cylindrical holes in solid material up to a thickness of 4.0mm. • Tapered cutting edges of the next drill step for simultaneous deburring or chamfering. • Low cutting speed and cooling liquid will increase lifetime and improve working results.

three flat shank

sheet metal

plastic

• For drilling larger holes in thin walled materials up to a thickness of 2.0mm, or for enlarging existing holes. • 2 Cutting grooves increasing by approx 20°. • No pilot drill necessary. • Low cutting speed and cooling liquid will increase lifetime and improve working results.

Retail Tube

Dimensions

drilling number shank range ø step of shank (mm) (mm) steps (mm) type

product code

drilling total cutting shank range ø length length shank (mm) (mm) (mm) (mm) type

product code

4.0-12.0

1.0

9

6.0

123690

3.0-14.0

58

34

6.0

123012

4.0-20.0

2.0

9

8.0

123692

6.0-20.0

67

44

8.0

123013

4.0-30.0

2.0

14

10.0

123693

6.0-30.0 104

81

10.0

123015

16.0-30.5

52

10.0

123014

Dimensions

ø

T: 0161 483 5557

reisser.co.uk

Retail Tube

ø

76

T: +353 579 333 314

reisser.ie

65


Type

Type

Type

N

H

Ti

Technical Data ER

BB

8 JO

ILL

DR

T

U

33

DIN

S HS BALT BIT CO ILL DR m .0 m ø =5mm

HIGH SPEED STEEL

DIN338 JOBBER DRILLS FULLY GROUND M35 COBALT Standards • DIN338. Applications • Optimised tip angle for long life in metal – particularly when drilling alloy and stainless steels.

Cobalt

1

Tip Geometry • 135° Split Point* – for drilling tougher alloy and stainless steels.

SPLIT POINT

CHISEL POINT

• Centres accurately without the need to centre punch.

For Metal

HSS

2

M35 Cobalt HSS • 5% Cobalt content for maximum life in stainless steel.

3

Fully Ground • Precision milled from solid material for optimim accuracy.

4

Reinforced Core • Giving greater fracture stability.

5

‘Bronze’ Finish

* diameters ≥3.0mm

DIN 118° SPLIT POINT

ISH D FIN ERE TAP

6 L=8

LIT SP

INT PO

split point

13

c 1p

OX

135°CHISEL POINT33890° tip angle

IN

EET SH ETAL M

SS INLE L STA STEE

OY ALL EEL ST

5

0

3

3

5

4

3

9

0

0

0

2

HSS

0

Applications

67

51

14

standard

60°

90°

120°

Type DIN

Type DIN

N 340

H 345

flute design

aluminium

metal

alloy steel

stainless steel

HCS DIN

DD

Co5 338

340

3

HSS-E

H

HSS

Co5 cast iron

• Retail packaging: PVC wallet. • Bulk packaging: ProBox and ProBox GP.

Dimensions

ø

Retail Wallet

(mm)

total length (mm)

flute length (mm)

product code

quantity per wallet

34 40 49 57 61 65 70 75 75 80 86 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151 160 169 178 184 191 198 205

12 18 24 30 33 36 39 43 43 47 52 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101 108 114 120 125 139 135 140

145153 145154 145155 145156 145157 145159 145161 145162 145164 145165 145300 145167 145170 145171 145172 145174 145175 145176 145177 145178 145179 145180 145182 145183 145184 145185 145186 145187 311400 311500 311600 311655 311700 311755 311800

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1.0 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 14.0† 15.0† 16.0† 17.0† 18.0† 19.0† 20.0†

Reduced Shank to improve power transmission and reduce slippage. • ≤16.0mm = 10.0mm dia. ≤20.0mm = 13.0mm dia. (packed in retail tubes) †

66

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

1T

HSS-E DIN

INOX non ferrous

TyD


FULLY GROUND M35 COBALT

FULLY GROUND M35 COBALT

PROBOX

Dimensions

ø

ProBox

Dimensions

flute length (mm)

product code

quantity per ProBox

1.0

34

12

124390

10

1.5

40

18

124391

2.0

49

24

2.5

57

3.0

ø

(mm)

total length (mm)

flute length (mm)

product code

quantity per ProBox

3.0

61

33

124394GP

100

10

3.2

65

36

124396GP

100

124392

10

3.5

70

39

124398GP

80

30

124393

10

4.0

75

43

124399GP

100

61

33

124394

10

4.2

75

43

124401GP

100

3.2

65

36

124396

10

4.5

80

47

124402GP

100

3.3

65

36

124397

10

4.8

86

52

145935GP

80

3.5

70

39

124398

10

5.0

86

52

124403GP

80

4.0

75

43

124399

10

5.5

93

57

124406GP

50

4.2

75

43

124401

10

6.0

93

57

124407GP

50

4.5

80

47

124402

10

4.8

86

52

145935

10

5.0

86

52

124403

10

5.5

93

57

124406

10

6.0

93

57

124407

10

6.5

101

63

124408

10

6.8

109

69

124409

10

7.0

109

69

124410

10

7.5

109

69

124411

10

8.0

117

75

124412

10

8.5

117

75

124413

10

9.0

125

81

124414

10

Retail Wallet

DIN338 JOBBER DRILL

HSS COBALT DRILL BIT ø=5.0 mm L=86mm

1pc SPLIT POINT

9.5

125

81

124415

10

10.0

133

87

124416

10

10.2

133

87

124417

5

10.5

133

87

124418

5

11.0

142

94

124419

5

11.5

142

94

124420

5

12.0

151

101

124421

5

12.5

151

101

124422

5

13.0

151

101

124423

5

T: 0161 483 5557

reisser.co.uk

ProBox

Cobalt

total length (mm)

ProBox GP

TAPERED FINISH

HSS

(mm)

PROBOX GP

135°

INOX SHEET METAL

5

ALLOY STEEL

STAINLESS STEEL

033543 900020

145167

ProBox GP

T: +353 579 333 314

reisser.ie

67


Type

Type

Type

N

H

Ti

Technical Data ER

BB

8 JO

ILL

DR

i-N ST HS ATED BIT O C ILL DR m .0 m ø =5mm

T

U

33

DIN

HIGH SPEED STEEL

DIN338 JOBBER DRILLS FULLY GROUND Ti-N COATED Standards • DIN338.

Ti-N Coated

For Metal

HSS

4

tip angle

IN

EET SH ETAL M

SS INLE L STA STEE

OY ALL EEL ST

5

0

3

3

5

4

3

9

0

0

0

2

standard

HSS

0

5W

Applications

flute design

HCS DIN

DD

340

3

HSS-E

H

TIN

60°

90°

120°

HSS

INOX non ferrous

aluminium

metal

alloy steel

stainless steel

Co5 cast iron

• Retail packaging: PVC wallet. • Bulk packaging: ProBox and ProBox GP.

Dimensions

ø

(mm)

Retail Wallet

total length (mm)

flute length (mm)

product code

quantity per wallet

1.5

40

18

TIN15W

1

2.0

49

24

TIN2W

1

2.5

57

30

TIN25W

1

3.0

61

33

TIN3W

1

3.2

65

36

TIN32W

1

3.5

70

39

TIN35W

1

4.0

75

43

TIN4W

1

4.2

75

43

TIN42W

1

4.5

80

47

TIN45W

1

4.8

86

52

TIN48W

1

5.0

86

52

TIN5W

1

Ti-N Coated

5.5

93

57

TIN55W

1

• High performance Titanium Nitride (Ti-N) coating increases edge hardness and reduces friction for longer life.

6.0

93

57

TIN6W

1

6.5

101

63

TIN65W

1

7.0

109

69

TIN7W

1

7.5

109

69

TIN75W

1

8.0

117

75

TIN8W

1

8.5

117

75

TIN85W

1

9.0

125

81

TIN9W

1

9.5

125

81

TIN95W

1

10.0

133

87

TIN100W

1

10.5

133

87

TIN105W

1

11.0

142

94

TIN110W

1

11.5

142

94

TIN115W

1

12.0

151

101

TIN120W

1

12.5

151

101

TIN125W

1

13.0

151

101

TIN130W

1

Fully Ground • Precision milled from solid high grade material for optimim accuracy and service life.

Reinforced Core

Bright/Gold Finish

T: 0161 483 5557

reisser.co.uk

1T

Co5 338

Tip Geometry

TyD

HSS-E DIN

1

* diameters ≥3.0mm

68

OX

TIN1W

• Giving greater fracture stability.

5

split point

H 345

12

• Centres accurately without the need to centre punch.

3

118° SPLIT POINT

INT PO

13

Type DIN

N 340

34

• 135° Split Point* – for drilling CHISEL POINT tougher alloy and stainless steels.

2

LIT SP

c 1p

Type DIN

1.0

• Optimised tip angle for long life in metal – particularly when drilling alloy and stainless steels.

SPLIT POINT

6 L=8

135°CHISEL POINT33890°

Applications

1

DIN ISH D FIN ERE TAP

T: +353 579 333 314

reisser.ie


FULLY GROUND Ti-N COATED

FULLY GROUND Ti-N COATED

PROBOX

Dimensions

ø

(mm)

PROBOX GP

ProBox

total length (mm)

flute length (mm)

product code

Dimensions quantity per ProBox

ø

(mm)

ProBox GP

total length (mm)

flute length (mm)

product code

quantity per ProBox

1.0

34

12

TIN1

10

3.0

61

33

TIN3GP

100

1.5

40

18

TIN15

10

3.2

65

36

TIN32GP

100

2.0

49

24

TIN2

10

3.5

70

39

TIN35GP

80

2.5

57

30

TIN25

10

4.0

75

43

TIN4GP

100

3.0

61

33

TIN3

10

4.2

75

43

TIN42GP

100

3.2

65

36

TIN32

10

4.5

80

47

TIN45GP

100

3.5

70

39

TIN35

10

5.0

86

52

TIN5GP

80

4.0

75

43

TIN4

10

5.5

93

57

TIN55GP

50

4.2

75

43

TIN42

10

6.0

93

57

TIN6GP

50

4.5

80

47

TIN45

10

4.8

86

52

TIN48

10

5.0

86

52

TIN5

10

5.5

93

57

TIN55

10

6.0

93

57

TIN6

10

6.5

101

63

TIN65

10

7.0

109

69

TIN7

10

7.5

109

69

TIN75

10

8.0

117

75

TIN8

10

8.5

117

75

TIN85

10

9.0

125

81

TIN9

10

9.5

125

81

TIN95

10

10.0

133

87

TIN100

10

10.5

133

87

TIN105

5

11.0

142

94

TIN110

5

11.5

142

94

TIN115

5

12.0

151

101

TIN120

5

12.5

151

101

TIN125

5

13.0

151

101

TIN130

5

DIN338 JOBBER DRILL

reisser.co.uk

Ti-N Coated

HSS Ti-N COATED DRILL BIT ø=5.0 mm L=86mm

1pc SPLIT POINT

TAPERED FINISH

135°

INOX SHEET METAL

5

T: 0161 483 5557

ProBox

ALLOY STEEL

HSS

Retail Wallet

STAINLESS STEEL

033543 900020

TIN5W

ProBox GP

T: +353 579 333 314

reisser.ie

69


Type

Type

Type

N

H

Ti

Technical Data ER

BB

8 JO

ILL

DR

T

U

33

DIN

D S HS OUN BIT GR ILL R D m .0 m ø =5mm

HIGH SPEED STEEL

DIN ISH D FIN ERE TAP

6 L=8

LIT SP

INT PO

11

c 1p

DIN338 JOBBER DRILLS FULLY GROUND

split point

tip angle

ALLOD WO

IC

AST

EET SH ETAL M

SPLIT POINT

118°CHISEL POINT338135°

PL

5

0

3

3

5

4

3

9

0

0

0

2

HSS

0

85

57

14

standard

Applications 60°

90°

Type DIN flute design

all wood

plastic

non ferrous

aluminium

metal

HCS DIN

D DI

340

3 34

HSS cast iron

Retail Wallet

Applications

(mm)

• For drilling wood, plastics, non-ferrous metals, aluminium, cast iron and steel.

1.0

34

12

145755

2

1.5

40

18

145757

2

2.0

49

24

145760

2

2.5

57

30

145762

2

3.0

61

33

145764

2

3.2

65

36

145773

2

3.5

70

39

145776

2

4.0

75

43

145778

1

4.2

75

43

145781

1

4.5

80

47

145782

1

4.8

86

52

145784

1

5.0

86

52

145785

1

Fully Ground

5.5

93

57

145788

1

• Precision milled from solid material for greater accuracy and service life that our roll forged bits.

6.0

93

57

145789

1

6.5

101

63

145790

1

7.0

109

69

145792

1

7.5

109

69

145793

1

8.0

117

75

145794

1

8.5

117

75

145795

1

9.0

125

81

145796

1

9.5

125

81

145797

1

10.0

133

87

145798

1

10.5

133

87

145800

1

11.0

142

94

145801

1

11.5

142

94

145804

1

12.0

151

101

145802

1

12.5

151

101

145805

1

13.0

151

101

145803

1

Fully Ground

1

• 118° Split Point* – centres accurately CHISEL POINT without the need to centre punch.

SPLIT POINT

2 For Metal

HSS

Tip Geometry

3

Reinforced Core • Giving greater fracture stability.

4

Bright Finish

* diameters ≥3.0mm

70

T: 0161 483 5557

reisser.co.uk

120° HSS-E

• Bulk packaging: ProBox and ProBox GP.

ø

total length (mm)

flute length (mm)

product code

quantity per wallet

T: +353 579 333 314

reisser.ie

1T

Co5 338

• Retail packaging: PVC wallet.

Dimensions

TyD

HSS-E DIN

Co5

Standards • DIN338.

Type DIN

N 340 90° H 345

H


FULLY GROUND JOBBER DRILLS

PROBOX

Dimensions

ø

(mm)

FULLY GROUND JOBBER DRILLS

PROBOX GP

ProBox

Dimensions

total length (mm)

flute length (mm)

product code

quantity per ProBox

ø

(mm)

ProBox GP

total length (mm)

flute length (mm)

product code

quantity per ProBox

1.0

34

12

145811

10

3.0

61

33

145831GP

100

1.5

40

18

145816

10

3.2

65

36

145834GP

100

2.0

49

24

145821

10

3.5

70

39

145837GP

80

2.5

57

30

145826

10

4.0

75

43

145843GP

100

2.8

61

33

145829

10

4.2

75

43

145845GP

100

3.0

61

33

145831

10

4.5

80

47

145848GP

100

3.1

65

36

145833

10

5.0

86

52

145853GP

80

3.2

65

36

145834

10

5.5

93

57

145858GP

50

3.3

65

36

145835

10

6.0

93

57

145863GP

50

3.5

70

39

145837

10

3.6

70

39

145838

10

3.7

70

39

145839

10

4.0

75

43

145843

10

4.1

75

43

145844

10

4.2

75

43

145845

10

4.5

80

47

145848

10

4.8

86

52

145851

10

4.9

86

52

145852

10

5.0

86

52

145853

10

5.2

86

52

145855

10

5.5

93

57

145858

10

6.0

93

57

145863

10

6.3

101

63

145866

10

6.5

101

63

145868

10

6.8

109

69

145871

10

7.0

109

69

145873

10

7.5

109

69

145878

10

8.0

117

75

145883

10

8.5

117

75

145888

10

9.0

125

81

145893

10

9.5

125

81

145898

10

10.0

133

87

145903

10

10.2

133

87

145904

5

10.5

133

87

145907

5

11.0

142

94

145908

5

11.5

142

94

145909

5

12.0

151

101

145910

5

12.5

151

101

145911

5

13.0

151

101

145912

5

T: 0161 483 5557

reisser.co.uk

Retail Wallet

ProBox

DIN338 JOBBER DRILL

Fully Ground

HSS GROUND DRILL BIT ø=5.0 mm L=86mm

1pc SPLIT POINT

TAPERED FINISH

118°

5

PLASTIC

ALL WOOD

HSS

SHEET METAL

033543 900020

145785

ProBox GP

T: +353 579 333 314

reisser.ie

71


Type

Type

Type

N

H

Ti

Technical Data

DIN

HIGH SPEED STEEL

SPLIT POINT

all wood

ø

Tip Geometry • 118° Chisel Point.

CHISEL POINT

• Greater elasticity - less breakage in hand held drilling machines.

Black Oxide finish

HSS

For Metal

Roll Forged

Roll Forged

4

• Greater strength.

• Improved lubricity and rust resistance.

Dimensions

ø

(mm)

3.0 3.2 3.5 4.0 4.2 4.5 5.0 5.5 6.0

72

ProBox GP

total length (mm)

flute length (mm)

product code

quantity per ProBox

61 65 70 75 75 80 86 93 93

33 36 39 43 43 47 52 57 57

241071GP 241073GP 241074GP 241075GP 241077GP 241078GP 241079GP 241082GP 241083GP

100 100 80 100 100 100 80 50 50

T: 0161 483 5557

reisser.co.uk

plastic

non ferrous

Dimensions

• For drilling wood, plastics, non ferrous metals, aluminium, cast iron and steel.

Steam Tempered

HSS

flute design

90°

aluminium

metal

D DI

340

3 34

HSS

120° HSS-E

cast iron

ProBox

flute length (mm)

product code

quantity per ProBox

34 40 43 46 49 57 57 61 61 65 65 65 70 70 70 75 75 75 80 86 86 86 86 93 93 101 101 101 109 109 109 109 117 117 117 125 125 125 133 133 133 142 142 151 151 151

12 18 20 22 24 30 30 33 33 36 36 36 39 39 39 43 43 43 47 52 52 52 52 57 57 63 63 63 69 69 69 69 75 75 75 81 81 81 87 87 87 94 94 101 101 101

241067 241068 241248 241265 241069 241249 241070 241250 241071 241072 241073 241100 241074 241102 241274 241075 241076 241077 241078 241104 241105 241079 241080 241082 241083 241254 241285 241084 241287 241085 241289 241086 241292 241087 241088 241300 241089 241090 241091 241309 241092 241093 241094 241095 241096 241097

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5

reisser.ie

1T

HCS DIN

total length (mm)

T: +353 579 333 314

TyD

Co5 338

(mm) 1.0 1.5 1.6 1.8 2.0 2.4 2.5 2.8 3.0 3.1 3.2 3.3 3.5 3.6 3.7 4.0 4.1 4.2 4.5 4.8 4.9 5.0 5.1 5.5 6.0 6.3 6.4 6.5 6.8 7.0 7.2 7.5 7.6 8.0 8.5 8.8 9.0 9.5 10.0 10.2 10.5 11.0 11.5 12.0 12.5 13.0

U

HSS-E DIN

• Bulk packaging: ProBox and ProBox GP.

Applications

3

standard

Type DIN

N 340 90° H 345

Co5

• DIN338.

2

tip angle

60°

Standards

SPLIT POINT

118°

chisel point

Type DIN

Applications

DIN338 JOBBER DRILLS ROLL FORGED

1

CHISEL POINT

338135°

T

HC


Standards

Type

Type

Type

H

Ti

U-TL

W

DIN

DIN

DIN

DIN

DIN

338

340

345 1869 1897 118° 135°CHISEL POINT 90° SPLIT POINT

HSS

Technical Data/Applications

split point

HSS-E

HCS

Co5

• DIN1897.

60° non ferrous

Applications • Ideal for use in sheet material • Optimised tip angle for long life in metal – particularly when drilling alloy and stainless steels.

aluminium

tip angle

For Metal

SPLIT POINT

Tip Geometry • 135° Split Point – for drilling tougher alloy and stainless steels. • Centres accurately, no need to centre punch.

2

Ti-N Coated • High performance Titanium Nitride (Ti-N) coating increases edge hardness and reduces friction for longer life.

4 5

ø

DIN

DIN

D

335

7483G

338

340

34

HSS

HSS-E

H

INOX

120°

alloy steel

stainless steel

cast iron

ProBox

total length (mm)

flute length (mm)

product code

quantity per ProBox

46

16

STIN3

10

3.2

49

18

STIN32

10

3.3

49

18

STIN33

10

3.5

52

20

STIN35

10

4.0

55

22

STIN4

10

4.1

55

22

STIN41

10

Stub Length • For greater resistance to breakage.

4.2

55

22

STIN42

10

4.9

62

26

STIN49

10

Bright/Gold Finish

5.0

62

26

STIN5

10

Type

Type

Type

N

H

Ti

DIN

DIN

Technical Data/Applications

HIGH SPEED STEEL

BLACKSMITH’S DRILLS REDUCED SHANK FULLY GROUND

For Metal

1

Tip Geometry • 118° Split Point – centres accurately without the need to centre punch.

2

Fully Ground • Less tolerance and longer life than our roll forged bits.

3

Reinforced Core • Giving greater fracture stability.

4

Bright Finish

5

3-Flat Reduced Shank • To improve power transmission and reduce slippage. • ≤16.0mm = 10.0mm dia., ≤25.0mm = 13.0mm dia.

CHISEL POINT

T: 0161 483 5557

reisser.co.uk

SPLIT POINT

118°CHISEL POINT338135°

split point

tip angle

standard

HSS

DIN

340 90° 345

three flat shank

HSS-E

HCS

Co5 all wood

Applications • For drilling wood, plastics, non-ferrous metals, aluminium, cast iron and steel.

SPLIT POINT

Co5

3.0

Fully Ground • Precision milled from solid high grade material for optimim accuracy and service life.

T

DIN

• Bulk packaging: ProBox.

(mm)

plastic

non ferrous

60°

aluminium

metal

90°

cast iron

120°

• Packaging: Retail tube.

ø

total length (mm)

flute length (mm)

shank (mm)

ø

product code

qty per tube

12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 18.0 19.0 20.0 22.0 24.0 25.0

151 151 151 160 160 169 169 178 178 184 184 191 198 205 230 250 250

101 101 101 108 108 114 114 120 120 125 125 130 135 140 150 160 160

10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13

240882 240883 240884 240885 240886 240887 240888 240889 240890 240891 240892 240894 240896 240898 240899 240900 240901

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

(mm)

T: +353 579 333 314

Ty

DIN

CHISEL POINT

3

H

flute design

Dimensions 1

Type

N

standard

90°

sheet metal

Type

Stubs & Blacksmith’s

DIN1897 STUB DRILLS FULLY GROUND Ti-N COATED

Type

N

reisser.ie

73

HSS

HIGH SPEED STEEL

Type


Type

Type

Type

Type

N

H

Ti

U-TL

DIN

DIN

Technical Data

IES

NG

SER

0 LO

34

DIN

S HS NG BIT LO ILL DR m .0 m ø =1532mm

HIGH SPEED STEEL

L=

3

5

4

all wood

For Metal

2

0

HSS

Applications

plastic

non ferrous

Dimensions

flute design

HCS DIN

DIN DIN

D DI

Co5

338

335 340

74 34

HSS

120° HSS-E

HC

HSS-E 90°

aluminium

pipes/profiles

cast iron

(mm)

ProBox

total length (mm)

flute length (mm)

product code

quantity per ProBox

2.0

85

56

240150

10

2.5

95

62

240155

10

3.0

100

66

240160

10

3.2

106

69

240162

10

Tip Geometry

3.5

112

73

240165

10

• 118° Split Point* – centres accurately without the need to centre punch.

3.8

119

78

240168

10

4.0

119

78

240170

10

4.2

119

78

240172

10

4.5

126

82

240175

10

4.8

132

87

145218

10

5.0

132

87

240180

10

5.5

139

91

240185

10

6.0

139

91

240190

10

6.5

148

97

240195

10

7.0

156

102

240200

10

8.0

165

109

240210

10

8.5

165

109

240215

10

9.0

175

115

240220

10

10.0

184

121

240230

10

12.0

205

134

240238

5

Reinforced Core • Giving greater fracture stability.

HSS

0

1T

standard

• Bulk packaging: ProBox.

• Less tolerance and longer life than our roll forged bits.

4

0

TyD

• Retail packaging: PVC wallet.

Fully Ground

3

0

Type DIN

N H 345 90° 1869

Co5

CHISEL POINT

2

9

tip angle

60°

ø

1

3

38

51

• For drilling wood, plastics, non-ferrous metals, aluminium, cast iron and steel.

Long Series

0

3

14

Applications

Bright Finish

* diameters ≥3.0mm

Dimensions

ø

L AL D WOO

PL

5

• DIN340.

(mm)

TIC AS

EET SH ETAL M

Standards

SPLIT POINT

split point

NT POI

11

1

DIN340 LONG SERIES DRILLS FULLY GROUND

SPLIT POINT

SH D FINI ERE TAP

IT SPL

pc

Type DIN

338 118°CHISEL POINT340135°

Retail Wallet

total length (mm)

flute length (mm)

product code

quantity per Wallet

Dimensions

ø

(mm)

total length (mm)

Retail Wallet

flute length (mm)

product code

quantity per Wallet

2.0

85

56

145129

2

5.0

132

87

145138

1

2.5

95

62

145130

2

5.5

139

91

145139

1

3.0

100

66

145131

2

6.0

139

91

145140

1

3.2

106

69

145132

2

6.5

148

97

145141

1

3.5

112

73

145133

2

7.0

156

102

145142

1

4.0

119

78

145134

1

8.0

165

109

145144

1

4.2

119

78

145135

1

9.0

175

115

145146

1

4.5

126

82

145136

1

10.0

184

121

145148

1

4.8

132

87

145137

1

12.0

205

134

145151

1

74

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

Ty

reisser.ie


Type

Type

Type

Type

Type

N

H

Ti

U-TL

W

DIN

DIN

DIN

DIN

338

340 118° SPLIT POINT

345 186990° 135°CHISEL POINT

HIGH SPEED STEEL

HSS

Tip Geometry • 135° Split Point* – centres accurately CHISEL POINT without the need to centre punch.

SPLIT POINT

2

3

Fully Ground • Less tolerance and longer life than our roll forged bits.

Reinforced Core • Giving greater fracture stability.

4

Bright Finish

* diameters ≥3.0mm Always pre-drill with a shorter drill of the same diameter to help prevent flexing and breakage

T: 0161 483 5557

reisser.co.uk

335

flute design

H

all wood

plastic

non ferrous

aluminium

pipes/profiles

D

7483G 338

340

34

HSS-E

H

cast iron

Retail Tube

total length (mm)

flute length (mm)

product code

quantity per tube

2.0

125

85

1400200

1

2.5

140

95

1400250

1

2.5

180

120

1400251

1

3.0

150

100

1400301

1

3.0

190

130

1400302

1

3.2

155

105

1400321

1

3.2

200

135

1400322

1

3.5

165

115

1400351

1

3.5

210

145

1400352

1

4.0

175

120

241014

1

4.0

220

150

145064

1

4.2

175

120

1400421

1

4.2

220

150

1400422

1

4.5

185

125

241016

1

4.5

235

160

145065

1

4.5

295

200

1400453

1

5.0

195

135

241017

1

5.0

245

170

145066

1

5.5

205

140

241018

1

5.5

260

180

145067

1

6.0

205

140

241019

1

6.0

260

180

145068

1

7.0

225

155

241021

1

7.0

290

200

145070

1

8.0

240

165

241023

1

8.0

305

210

145072

1

T: +353 579 333 314

reisser.ie

T

DIN

• Packaging: Retail tube.

Dimensions

Ty

DIN DIN

120° HSS

90°

Type

Extra Long

1

DIN

N 1897

HSS

• For drilling wood, plastics, non-ferrous metals, aluminium, cast iron and steel.

HCS

standard

Type DIN

Co5

ø

Applications

For Metal

60°

(mm)

• DIN1869.

HSS-E

tip angle

Co5Applications

DIN1869 EXTRA LONG DRILLS FULLY GROUND Standards

split point

Technical Data

75


CHUCKS Applications • Suitable for Rotary or Rotary Impact/Percussion Drills • ½” x 20F Mount • SDS-plus Adaptor enables use of conventional straight shank drills with an SDS-plus hammer machine (in ROTARY MODE only) • Locking Screw is REVERSE THREAD (Tightens Anticlockwise)

Characteristics

Product tooth Code pitch

KEY13

Applications

Packaging

ALL-METAL DRILL CHUCK WITH MULTI-FUNCTION KEY & Locking Screw

mount

capacity

classification

1/2” x 20F

1.5 - 13.0mm

Rotary/Impact Rotary/Impact Drills ≤850w

Product tooth Code pitch

Characteristics

Chuck and Locking Screw

KEYL13

Packaging

STANDARD DUTY, ALL-METAL KEYLESS DRILL CHUCK & Locking Screw

mount

capacity

classification

1/2” x 20F

2.0 - 13.0mm

Rotary/Impact Rotary/Impact Drills ≤700w

Product tooth Code pitch

CHUCKS

Applications

Characteristics

KEYL13HD

Applications

Packaging

HEAVY DUTY, ALL-METAL KEYLESS DRILL CHUCK & Locking Screw

mount

capacity

classification

1/2” x 20F

1.5 - 13.0mm

Rotary/Impact Rotary/Impact Drills ≤1200w

Product tooth Code pitch

KEYL13SS

Applications

Characteristics

Packaging

HEAVY DUTY, SINGLE SLEEVE ALL-METAL KEYLESS DRILL CHUCK & Locking Screw

mount

capacity

classification

1/2” x 20F

1.5 - 13.0mm

Rotary/Impact Cordless Rotary/Impact Drills up to 24v WITH SPINDLE LOCK

76

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


CHUCKS Product tooth Code pitch

Applications

ALL-METAL DRILL CHUCK WITH MULTI-FUNCTION KEY & SDS-plus ADAPTOR

mount

capacity

1/2” x 20F

1.5 - 13.0mm

classification

rotary only

Product tooth Code pitch

Characteristics

Applications

Packaging

STANDARD DUTY, ALL-METAL KEYLESS DRILL CHUCK & SDS-plus ADAPTOR

mount

capacity

1/2” x 20F

2.0 - 13.0mm

classification

rotary only

Product tooth Code pitch

Characteristics

SDSKEYL13HD

SDS-plus Rotary Hammers in ROTARY MODE ONLY

Applications

Packaging

HEAVY DUTY, ALL-METAL KEYLESS DRILL CHUCK & SDS-plus ADAPTOR

mount

capacity

1/2” x 20F

1.5 - 13.0mm

classification

rotary only

Product tooth Code pitch

MFKEY

SDS-plus Rotary Hammers in ROTARY MODE ONLY

Characteristics

SDS-plus Rotary Hammers in ROTARY MODE ONLY

Applications

Packaging

MULTI FUNCTION CHUCK KEY for most 10.0mm & 13.0mm capacity keyed chucks CHUCK ACCESSORIES

MULTIFUNCTION CHUCK KEY

type

compatible with

classification

S2/S14

10.0/13.0mm Keyed Chucks

N/A

Product tooth Code pitch

SDSADAPT

S2/S14

1pc

5

033543 759185

MFKEY

For most 10.0mm & 13.0mm capacity keyed chucks

Characteristics

Applications

Packaging

SDS-plus CHUCK ADAPTOR CHUCK ACCESSORIES

type

compatible with

SDS-PLUS CHUCK ADAPTOR

classification

1/2” x 20F to SDS-plus

1/2” x 20F

Most 1/2” Capacity Chucks

1pc

5

T: 0161 483 5557

reisser.co.uk

033543 759178

SDSADAPT

rotary only

SDS Chucks and Accessories

SDSKEYL13

Packaging

SDS-plus Rotary Hammers in ROTARY MODE ONLY

T: +353 579 333 314

reisser.ie

77

CHUCKS

SDSKEY13

Characteristics


Variable

4-6 tpi

4-6 tpi

Combo

Variable

COBALT Bi-METAL HOLESAWS AND ACCESSORIES

4-6 tpi

4-6 tpi

Variable

Combo

Characteristics

38 mm

bi 8%

4-6 tpi

COBALT

Combo

cobalt & bi-metal

vari-pitch

38 mm

bi 8%

cutting depth

Quick cut

high performance

COBALT

38 mm

Applications

bi 8%

COBALT all wood

plywood

gypsum board

non ferrous

aluminium

metal

plastic

INOX

Applications • For drilling wood, plastic, metal and stainless steel.

stainless steel

• Packaging: Retail cardboard box.

1

Premium grade 8% Cobalt HSS cutting edge

SAWS & HOLESAWS

Holesaws

• Maximum heat resistance – ideal for cutting stainless steel.

2

4-6 t.p.i. Variable Pitch Teeth

3

Durable carbon steel body

4

Universal threaded drive

• Fast cutting and less clogging.

• Reduced breakage.

• Compatible with most other brands.

Size

Retail Box

saw (mm)

ø

product code

quantity per box

14.0 16.0 17.0 19.0 20.0 21.0 22.0 24.0 25.0 27.0 29.0 30.0 32.0 33.0 35.0 38.0 40.0 41.0 43.0

142590 118321 142591 118322 118323 118324 118325 142592 118326 118327 118328 118329 118330 142593 118331 118332 118333 118334 142595

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

78

T: 0161 483 5557

reisser.co.uk

Size

Retail Box

saw (mm)

ø

product code

quantity per box

44.0 46.0 48.0 51.0 54.0 57.0 60.0 64.0 65.0 67.0 68.0 70.0 73.0 76.0 79.0 83.0 86.0 89.0 92.0 95.0 102.0 105.0 108.0 111.0 114.0 121.0 127.0 140.0 152.0 160.0 168.0 177.0 200.0 210.0

118335 118336 118354 118337 118338 118339 118340 118341 118002 118342 118920 118343 142597 118344 138226 118356 142598 118345 138228 138229 118346 138230 118013 118003 138231 138232 118004 118005 142600 142601 142602 142603 142604 142605

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

T: +353 579 333 314

reisser.ie


COBALT BI-METAL ACCESSORIES H.S.S. BI-METAL HOLESAW ARBORS Dimensions type

AS1 AS2 AS3 AS4 *AS11 *AS22

Retail Box

to fit hole saw (mm)

shank type

hex width (mm)

product code

quantity per box

14.0 - 30.0 32.0 - 210.0 14.0 - 30.0 32.0 - 210.0 14.0 - 30.0 32.0 - 152.0

HEX HEX SDS-Plus SDS-Plus HEX HEX

SW 11.0 SW 11.0 - - SW 9.5 SW9.5

118016 118017 118018 118019 118020 118022

1 1 1 1 1 1

ø

* Ideal for cordless machines, due to smaller width of hex shanks

PILOT DRILL Description

overall length product (mm) code

Probox

quantity per product wallet code

quantity per tube

HSS Pilot Drill for all holesaw arbors

75

202315H

1

202315

10

HSS Long Pilot Drill for all holesaw arbors

100

202316H

1

202316

10

HSS Pilot Drill Fits all arbors. For wood, plastic and metal.

ARBOR EXTENSION Dimensions Description

Retail Wallet

overall length (mm)

socket hex shank

product code

quantity per wallet

Holesaw arbor extension for AS11 & AS22 arbors

300

9.5

9.5

1940300

1

Holesaw arbor extension for AS1 & AS2 arbors

300

11

11

1940311

1

SYSTEM COMPONENTS AS22 9.5mm HEX AS11 9.5mm HEX

AS1 11mm HEX Holesaws

ø14-30mm

Holesaws ø32-210mm

AS2 11mm HEX

(ø32-152mm with AS22) AS3 SDS-plus

AS4 SDS-plus

SDS-plus shank arbors are to be used with SDS-plus hammer machines IN ROTARY MODE ONLY T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

79

Holesaw Accessories

Retail Wallet

SAWS & HOLESAWS

Dimensions


JIGSAW BLADES Suitable for virtually all of today’s popular jigsaws, including AEG, Atlas Copco, Bosch, DeWalt, Fein, Festool, Freud, Hilti, Hitachi, Mafell, Makita, Metabo, Milwaukee, Panasonic, Porter Cable, Ryobi and Worx

Tooth pitch

toothlength pitch Tooth

3mm/ 8.5 tpi

75mm

Characteristics

Applications

HCS/CV

240517

quick cut

alloyed tool steel

side set diag. sharpened

rough cut

Soft wood and board materials 4.0–50mm. Soft plastics <50mm.

Dimensions: 100mm x 9.8mm x 1.27mm

softwood

plastic

Equivalent Bosch Code

quantity per pack

T111C

5

HSS

Characteristics

toothlength pitch Tooth

Tooth pitch

4mm/ 6.35 tpi

Applications

bi-metal

75mm

HCS/CV

240520

quick cut

alloyed tool steel

Dimensions: 100mm x 7.8mm x 1.27mm

side set diag. sharpened

rough cut

all wood

Wood and board materials 5–50mm.

Equivalent Bosch Code

quantity per pack

T144D

5

SAWS & HOLESAWS

Jigsaw Blades

HSS

Tooth pitch

toothlength pitch Tooth

4mm/ 6.35 tpi

155mm

Characteristics

Applications

bi-metal

HCS/CV

XHGS54

quick cut

alloyed tool steel

side set diag. sharpened

Extra long blade. All wood types 5–120mm.

Dimensions: 180mm x 7.8mm x 1.27mm

HSS

Tooth pitch

4mm/ 6.35 tpi

all wood

rough cut

Equivalent Bosch Code

quantity per pack

T744D

5

Characteristics

toothlength pitch Tooth

Applications

bi-metal

75mm

HCS/CV

240516

quick cut

alloyed tool steel conically ground, diag. sharpened

clean cut

Fast and clean cut; all wood types, plastics 10–45mm.

Dimensions: 100mm x 7.8mm x 1.45mm

all wood

plastic

Equivalent Bosch Code

quantity per pack

T101D

5

HSS

Tooth pitch

toothlength pitch Tooth

4mm/ 6.35 tpi

105mm

Characteristics

Applications

bi-metal

HCS/CV

XHC34D

quick cut

Dimensions: 132mm x 7.8mm x 1.68mm

alloyed tool steel conically ground, diag. sharpened

straight

clean cut

Fast, clean, straight cuts in wood, laminated chipboard and soft plastics 10-65mm. Ideal for deep straight cuts due to blade thickness.

all wood

plastic

Equivalent Bosch Code

quantity per pack

T101DP Long

5

HSS

80

T: 0161 483 5557

bi-metal reisser.co.uk

T: +353 579 333 314

reisser.ie


JIGSAW BLADES Suitable for virtually all of today’s popular jigsaws, including AEG, Atlas Copco, Bosch, DeWalt, Fein, Festool, Freud, Hilti, Hitachi, Mafell, Makita, Metabo, Milwaukee, Panasonic, Porter Cable, Ryobi and Worx

Tooth pitch

toothlength pitch Tooth

2.5mm/ 10 tpi

75mm

Characteristics

Applications

HCS/CV

240515

alloyed tool steel conically ground, diag. sharpened

Dimensions: 100mm x 7.8mm x 1.45mm

clean cut

Clean cuts in all wood, boards and soft plastics 3–30mm.

all wood

plastic

Equivalent Bosch Code

quantity per pack

T101B

5

HSS

Characteristics

toothlength pitch Tooth

Tooth pitch

Applications

bi-metal

2.5mm/ 10 tpi

75mm HCS/CV alloyed tool steel conically ground, diag. sharpened

clean cut

Splinterfree surface cuts in all wood types and plastics 3–30mm.

Dimensions: 100mm x 7.8mm x 1.45mm

HSS

Tooth pitch

toothlength pitch Tooth

2.5mm/ 10 tpi

105mm

all wood

plastic

Equivalent Bosch Code

quantity per pack

T101BR

5

Characteristics

Applications

bi-metal

The blade is exactly the same as a standard T101BR EXCEPT it is 30mm longer, allowing a reverse cut in thicker materials.

HCS/CV

XHC32R

reverse teeth

Dimensions: 132mm x 7.8mm x 1.45mm

alloyed tool steel conically ground, diag. sharpened

clean cut

Extra long blade. Clean, splinterfree surface cuts in all wood types inc. laminates and soft plastics 3–65mm.

plastic

all wood

Equivalent Bosch Code

quantity per pack

T101BR Long

5

Tooth pitch

toothlength pitch Tooth

2.5mm/ 10 tpi

91mm

202436 ‘STAR’ Teeth 3 times sharpened Dimensions: 117mm x 10mm x 1.45mm

Characteristics

SAWS & HOLESAWS

HSS

Applications

bi-metal

HCS/CV quick cut

straight

alloyed tool steel very clean cut

Especially for clean and fast cuts HCS/CV in all types of wood and plastics 3–60mm.

HSS

all wood

plastic

perspex

varicor/corian

Equivalent Bosch Code

quantity per pack

T234X

5

HSS

Tooth pitch

Characteristics

toothlength pitch Tooth

Applications

bi-metal

1.9mm/ 13 tpi

55mm bi-metal

HC19RBi ‘LAMINATOR’ Dimensions: 80mm x 7.9mm x 1.27mm

T: 0161 483 5557

reverse teeth

bi-metal

conically ground, diag. sharpened

clean cut

Clean, splinterfree surface cuts in laminate flooring, parquet flooring and solid wood flooring 2.5-20mm.

reisser.co.uk

lam. coated/parquet

This is a short bladeonly 55mm tooth length allowing easy control when cutting.

Equivalent Bosch Code

quantity per pack

UNIQUE to Reisser

5

T: +353 579 333 314

reisser.ie

Jigsaw Blades

240545

reverse teeth

81


JIGSAW BLADES Suitable for virtually all of today’s popular jigsaws, including AEG, Atlas Copco, Bosch, DeWalt, Fein, Festool, Freud, Hilti, Hitachi, Mafell, Makita, Metabo, Milwaukee, Panasonic, Porter Cable, Ryobi and Worx

Tooth pitch

tooth Toothpitch length

4mm/6.35 tpi

75mm

240521

Characteristics Curved saw blade. For wood and board 5–50mm. Ideal for curve cutting.

Applications

HCS/CV quick cut

Dimensions:100mm x 6.5mm x 1.27mm

alloyed tool steel

side set diag. sharpened

rough cut

all wood

Equivalent Bosch Code

qty per pack

T244D

5

HSS

Tooth pitch

tooth Toothpitch length

1.35mm/19 tpi

50mm

240502

Characteristics Clean curve cutting in softwood, plywood and laminate 1.5–15mm. Soft plastics <15mm.

Dimensions: 76.5mm x 4.5mm x 1.25mm

Applications

bi-metal HCS/CV alloyed tool steel conically ground, diag. sharpened

clean cut

softwood

curved saw blade

laminate

lam. chipboard

Equivalent Bosch Code

qty per pack

T101AO

5

HSS HCS/CV

Tooth pitch

tooth Toothpitch length

4mm/6.35tpi

75mm

X32825 ‘CURVE’

SAWS & HOLESAWS

Jigsaw Blades

Dimensions: 100mm x 6.5mm x 1.27mm

Characteristics Fast, curved cuts in all types of wood 5 - 50mm. quick cut

Applications

bi-metal HSS high speed HCS/CV steel side set

diag. sharpened

rough cut

curved saw blade

all wood

Equivalent Bosch Code

qty per pack

N/A

5

bi-metal HSS

Tooth pitch

tooth Toothpitch length

1.8-2.5mm

91mm

X31528 ‘KOMBI’ Dimensions: 132mm x 9.8mm x 1.0mm

Tooth pitch

tooth Toothpitch length

1.1mm

50mm

240541

Characteristics Characteristics; for metal pipes & profiles 2.5-10mm thickness and up to 80mm in diameter. Also wood and wood containing metal residue up to 80mm thick.

bi-metal

TWINCUT

bi-metal

vari pitch

tooth Toothpitch length

Grit

54mm

240532

T: 0161 483 5557

sheet metals steel pipes/profiles metal residue

Equivalent Bosch Code

qty per pack

T345XF

2

Applications

Solid carbide cutting edge. Specialist blade for steel, metal sheets and stainless steel 1.5–3mm.

INOX carbide strip

sheet metals steel pipes/profiles stainless steel

Equivalent Bosch Code

qty per pack

T118AHM

2

Characteristics

Applications

Coarse grained, carbide coated. Ceramic tiles, glass fibre and reinforced plastics 5–15mm. carbide grit

Dimensions: 79mm x 8.8mm x 2.3mm

82

rough cut

Characteristics

Dimensions: 79mm x 8.8mm x 2.3mm

Tooth pitch

Applications

reisser.co.uk

glass

ceramics

plastic CRP

Equivalent Bosch Code

qty per pack

T130RIFF

2

T: +353 579 333 314

reisser.ie


JIGSAW BLADES Suitable for virtually all of today’s popular jigsaws, including AEG, Atlas Copco, Bosch, DeWalt, Fein, Festool, Freud, Hilti, Hitachi, Mafell, Makita, Metabo, Milwaukee, Panasonic, Porter Cable, Ryobi and Worx

HCS/CV

Tooth pitch

toothlength pitch Tooth

0.7mm/ 36 tpi

55mm

Characteristics

Applications

HSS

XMG107

high speed steel wavy set toothing

Clean and precise. Thin metal sheets 0.5-1.5mm.

Dimensions: 76.5mm x 7.8mm x 1.0mm

bi-metal

sheet metals

Equivalent Bosch Code

quantity per pack

T118G

5

HCS/CV

Tooth pitch

toothlength pitch Tooth

1.2mm/ 21 tpi

55mm

Characteristics

Applications

HSS

XMG11 T118G

high speed steel wavy set toothing

Clean and precise. Thin metal sheets 1.2–3mm.

Dimensions: 76.5mm x 7.8mm x 1.0mm Dimensions: 76.5mm x 7.8mm x 1.0mm

bi-metal

sheet metals steel pipes/profiles

Equivalent Bosch Code

quantity per pack

T118A

5

HCS/CV

toothlength pitch Tooth

2mm/ 13 tpi

55mm

Characteristics

Applications

Jigsaw Blades

Tooth pitch

HSS

Dimensions: 76.5mm x 7.8mm x 1.0mm

sheet metals steel pipes/profiles

non-ferrous

aluminium

Steel, non-ferrous metal and aluminium 2.5–6mm.

bi-metal

Equivalent Bosch Code

quantity per pack

T118B

5

SAWS & HOLESAWS

XMG12

high speed steel wavy set toothing

HCS/CV

Tooth pitch

1.0mm/ 25 tpi

toothlength pitch Tooth

Characteristics

Applications

105mm HSS

XMG31

high speed steel wavy set toothing

Dimensions: 132mm x 9.8mm x 1.0mm

Long blade for steel (1.0–3.0mm). Pipes, profiles and sandwich materials up to 80mm.

bi-metal

sheet metals steel pipes/profiles

sandwich materials

Equivalent Bosch Code

quantity per pack

T318A

5

HCS/CV

Tooth pitch

toothlength pitch Tooth

1.8mm/ 14 tpi

105mm

Characteristics

Applications

HSS

XMG32

high speed steel wavy set toothing

Dimensions: 132mm x 9.8mm x 1.0mm

Long blade for steel (2.5–6.0mm). Pipes, profiles and sandwich materials up to 80mm.

bi-metal

T: 0161 483 5557

reisser.co.uk

steel pipes/profiles

non-ferrous

sandwich materials

Equivalent Bosch Code

quantity per pack

T318B

5

T: +353 579 333 314

reisser.ie

83


JIGSAW BLADES HCS/CV

Suitable for virtually all of today’s popular jigsaws, including AEG, Atlas Copco, Bosch, DeWalt, Fein, Festool, Freud, Hilti, Hitachi, Mafell, Makita, Metabo, Milwaukee, Panasonic, Porter Cable, Ryobi and Worx HSS

Tooth pitch

toothlength pitch Tooth

1.2mm/ 21 tpi

55mm

Characteristics

Applications

INOX

bi-metal

240523

bi-metal

Dimensions: 76.5mm x 7.8mm x 1.0mm

HCS/CV

wavy set toothing high performance

Flexible blade for steel and stainless steel 1.2-3.0mm. Long life.

sheet metals steel pipes/profiles stainless steel

Equivalent Bosch Code

quantity per pack

T118AF

5

HSS

Tooth pitch

toothlength pitch Tooth

2.0mm/ 13 tpi

55mm

Characteristics

Applications

INOX

bi-metal

240525

bi-metal

Dimensions: 76.5mm x 7.8mm x 1.0mm

wavy set toothing high performance

Flexible blade for steel, stainless steel, non-ferrous HCS/CV metal and aluminium 2.5-6.0mm. Long life.

sheet metals steel pipes/profiles

non-ferrous

aluminium

stainless steel

Equivalent Bosch Code

quantity per pack

T118BF

5

SAWS & HOLESAWS

Jigsaw Blades

HSS

Tooth pitch

toothlength pitch Tooth

1mm/ 25 tpi

105mm

Characteristics

Applications

bi-metal

240527

bi-metal

wavy set toothing high performance

Flexible long blade for steel 1.0-3.0mm. HCS/CV Pipes and profiles up to 80mm. Long life.

Dimensions: 132mm x 9.8mm x 1.0mm

sandwich materials

sheet metals steel pipes/profiles

Equivalent Bosch Code

quantity per pack

T318AF

5

HSS

Tooth pitch

toothlength pitch Tooth

3mm/ 8.5 tpi

75mm

Characteristics

Applications

bi-metal

240507

quick cut

Dimensions: 100mm x 7.8mm x 1.0mm

bi-metal

side set toothing high performance

Flexible blade for aluminium, non-ferrous metal and steel 3–15mm. Plastics 3-30mm.

sheet metals steel pipes/profiles

non-ferrous

aluminium

plastic

Equivalent Bosch Code

quantity per pack

T127DF

5

HCS/CV

Tooth pitch

toothlength pitch Tooth

1.2mm/ 21 tpi

55mm

Characteristics

HSS

X31312

high speed steel wavy set toothing curved saw blade

Dimensions: 76.5mm x 6.4mm x 1.0mm

Clean and precise. Curved cuts for steel and sheet metal 1.2–2mm.

bi-metal

84

Applications

T: 0161 483 5557

reisser.co.uk

sheet metals steel pipes/profiles

Equivalent Bosch Code

quantity per pack

T218A

5

T: +353 579 333 314

reisser.ie


SABRE SAW BLADES Suitable for virtually all of today’s popular sabre saws, including AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Festool, Hilti, Hitachi, Makita, Metabo, Milwaukee, Panasonic, Ryobi and Worx

Tooth pitch

toothlength pitch Tooth

4.2mm/ 6 tpi

130mm

Characteristics

Applications

HCS/CV

121600

quick cut

alloyed tool steel

Dimensions: 150mm x 19mm x 1.27mm Side set and sharpened diagonally.

straight

rough cut

side set diag. sharpened

For all types of wood, plastics, gypsum board 6–100mm.

plastic

all wood

gypsum board

Equivalent Bosch Code

quantity per pack

S644D

5

HSS

Tooth pitch

toothlength pitch Tooth

6.35/5mm/ 4/5 tpi

220mm

Characteristics

Applications

bi-metal

HCS/CV

121611

quick cut

Dimensions: 240mm x 19mm x 1.27mm Milled, sharpened diagonally, induction hardened.

alloyed tool steel semi clean cut

green wood

Special saw blade for green wood and rough timber (no nails) 15–190mm.

HCS/CV

Equivalent Bosch Code

quantity per pack

S1531L

5

HSS

HSS

toothlength pitch Tooth

4.2mm/ 6 tpi

130mm

Characteristics

Applications

bi-metal

Sabre Saw Blades

Tooth pitch

bi-metal

3021150Bi

quick cut

Dimensions: 150mm x 19mm x 1.27mm Milled and side set.

bi-metal

straight

rough cut

high performance

Flexible blade for fast, straight cuts in HCS/CV all types of wood and soft plastic 6-100mm.

all wood

plastic

Equivalent Bosch Code

quantity per pack

S611DF

5

Tooth pitch

toothlength pitch Tooth

4.2mm/ 6 tpi

205mm

Characteristics

SAWS & HOLESAWS

HSS

Applications

bi-metal

3021225Bi

quick cut

bi-metal

straight

rough cut

high performance

Flexible blade for fast, straight cuts in HCS/CV all types of wood and soft plastic 6-175mm.

Dimensions: 225mm x 19mm x 1.27mm Milled and side set.

all wood

plastic

Equivalent Bosch Code

quantity per pack

S1111DF

5

HSS

Tooth pitch

toothlength pitch Tooth

4.2mm/ 6 tpi

280mm

Characteristics

Applications

bi-metal

3021300Bi

Dimensions: 300mm x 19mm x 1.27mm Milled and side set

T: 0161 483 5557

quick cut

bi-metal

straight

rough cut

high performance

Flexible blade for fast, straight cuts in all types of wood and soft plastic 6-250mm.

reisser.co.uk

all wood

plastic

Equivalent Bosch Code

quantity per pack

S1411DF

5

T: +353 579 333 314

reisser.ie

85


SABRE SAW BLADES HCS/CV

Suitable for virtually all of today’s popular sabre saws, including AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Festool, Hilti, Hitachi, Makita, Metabo, Milwaukee, Panasonic, Ryobi and Worx HSS

Tooth pitch

toothlength pitch Tooth

2.5/1.8mm/ 10/14 tpi

130mm

Characteristics

Applications

bi-metal

121612

bi-metal

Dimensions: 150mm x19mm x 0.9mm Milled and side set

high performance semi clean cut side set toothing

For wood with metal residue 5–100mm, sheet metal, HCS/CV pipes, aluminium profiles 3–10mm. Plastic profiles 3–100mm, window & pallet reconstruction.

pallet repair

metal residue steel pipes/profiles

Equivalent Bosch Code

quantity per pack

S922VF

5

HSS

Tooth pitch

toothlength pitch Tooth

2.5/1.8mm/ 10/14 tpi

205mm

Characteristics

Applications

bi-metal

121613

bi-metal

Dimensions: 225mm x19mm x 0.9mm Milled and side set

high performance semi clean cut side set toothing

For wood with metal residue 5–175mm, sheet metal, pipes, HCS/CV aluminium profiles 3–10mm. Plastic profiles 3–175mm, window & pallet reconstruction.

pallet repair

metal residue steel pipes/profiles

plastic CRP

Equivalent Bosch Code

quantity per pack

S1122VF

5

SAWS & HOLESAWS

Sabre Saw Blades

HSS

Tooth pitch

toothlength pitch Tooth

1.8mm/ 14 tpi

130mm

Characteristics

Applications

INOX

bi-metal

144245

bi-metal

Dimensions: 150mm x 19mm x 0.9mm Milled and wavy set

high performance wavy set toothing

For steel, stainless steel and non-ferrous HCS/CV metals 2.0-3.5mm, pipes/profiles 10–100mm.

steel pipes/profiles

non-ferrous

stainless steel

Equivalent Bosch Code

quantity per pack

S922BF

5

HSS

Tooth pitch

toothlength pitch Tooth

1.8mm/ 14 tpi

180mm

Characteristics

Applications

INOX

bi-metal

144246

bi-metal

Dimensions: 200mm x 19mm x 0.9mm Milled and wavy set

high performance wavy set toothing

For steel, stainless steel and non-ferrous HCS/CV metals 2.0-3.5mm, pipes/profiles 10–150mm.

steel pipes/profiles

non-ferrous

stainless steel

Equivalent Bosch Code

quantity per pack

S1122BF

5

HSS

Tooth pitch

toothlength pitch Tooth

1.8mm/ 14 tpi

230mm

Applications

INOX

bi-metal

3013250

Dimensions: 250mm x 19mm x 0.9mm Milled and wavy set.

86

Characteristics

T: 0161 483 5557

bi-metal

high performance wavy set toothing

For steel, stainless steel and non-ferrous metals 2.0-3.5mm, pipes/profiles 10–200mm.

reisser.co.uk

steel pipes/profiles

non-ferrous

stainless steel

Equivalent Bosch Code

quantity per pack

S1122BF Long

5

T: +353 579 333 314

reisser.ie


SABRE SAW BLADES HCS/CV

Suitable for virtually all of today’s popular sabre saws, including AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Festool, Hilti, Hitachi, Makita, Metabo, Milwaukee, Panasonic, Ryobi and Worx HSS

Tooth pitch

toothlength pitch Tooth

1.4mm/ 18 tpi

130mm

Characteristics

Applications

INOX

bi-metal

112042

bi-metal

Dimensions: 150mm x 19mm x 0.9mm Milled and wavy set.

high performance wavy set toothing

Flexible, flush cut. Steel and stainless steel 1.5–2.5mm, pipes/profiles 5–100mm.

HCS/CV

steel pipes/profiles stainless steel

metal

Equivalent Bosch Code

quantity per pack

S922EF

5

HSS

Tooth pitch

toothlength pitch Tooth

1.4mm/ 18 tpi

180mm

Characteristics

Applications

INOX

bi-metal

144243

bi-metal

Dimensions: 200mm x 19mm x 0.9mm Milled and wavy set

quick cut

high performance wavy set toothing

metal

steel pipes/profiles stainless steel

Flexible, flush cut. Steel and stainless

HCS/CV steel 1.5–2.5mm, pipes/profiles 5–150mm.

Equivalent Bosch Code

quantity per pack

S1122EF

5

HSS

toothlength pitch Tooth

2.5mm/ 10 tpi

130mm

Characteristics

Applications

INOX

bi-metal

111018

bi-metal

Dimensions: 150mm x 19mm x 0.9mm Milled and side set

Sabre Saw Blades

Tooth pitch

high performance semi clean cut

For steel, stainless steel and non-ferrous HCS/CV metals 3-5mm, pipes/profiles 5-100mm.

wood with nails steel pipes/profiles stainless steel

non-ferrous

Equivalent Bosch Code

quantity per pack

S922HF

5

Tooth pitch

toothlength pitch Tooth

2.5mm/ 10 tpi

180mm

Characteristics

Applications

INOX

bi-metal

111024

bi-metal

Dimensions: 200mm x 19mm x 0.9mm Milled and side set

SAWS & HOLESAWS

HSS

high performance semi clean cut

For steel, stainless steel and non-ferrous HCS/CV metals 3-5mm, pipes/profiles 5-150mm.

wood with nails steel pipes/profiles stainless steel

non-ferrous

Equivalent Bosch Code

quantity per pack

S1122HF

5

HSS

Tooth pitch

toothlength pitch Tooth

2.5mm/ 10 tpi

260mm

Characteristics

Applications

INOX

bi-metal

111034

bi-metal

Dimensions: 280mm x 19mm x 0.9mm Milled and side set

T: 0161 483 5557

high performance semi clean cut

For steel, stainless steel and non-ferrous metals 3-5mm, pipes/profiles 5-230mm.

reisser.co.uk

wood with nails steel pipes/profiles stainless steel

non-ferrous

Equivalent Bosch Code

quantity per pack

S1122HF Long

5

T: +353 579 333 314

reisser.ie

87


OMT BLADES

HCS/CV

Suitable for use with most of today’s popular oscillating multi tools (OMT), except Fein/Bosch machines utilising the “STARLOCK” blade fastening system HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

14 tpi

32mm

40mm

Characteristics

Applications

bi-metal

OMTJAP32

bi-metal

high performance very clean cut

all wood

plastic

perspex

gypsum board

Clean and fast cuts in all types of wood and plastics, as well as gypsum plasterboards.

HCS/CV

SAWS & HOLESAWS

Oscillating Multi-Tool Blades

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

14 tpi

44mm

40mm

Characteristics

Applications

bi-metal

OMTJAP44

bi-metal

high performance very clean cut

all wood

plastic

perspex

gypsum board

Clean and fast cuts in all types of wood and plastics, as well as gypsum plasterboards.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

14 tpi

64mm

40mm

Characteristics

Applications

bi-metal

OMTJAP64

bi-metal

high performance very clean cut

all wood

plastic

perspex

gypsum board

Clean and fast cuts in all types of wood and plastics, as well as gypsum plasterboards.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

14 tpi

32mm

55mm

Characteristics

Applications

bi-metal

OMT3214L

bi-metal

high performance very clean cut

all wood

plastic

perspex

gypsum board

Long blade for deep cuts in all types of wood and plastics, as well as gypsum plasterboards.

88

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


OMT BLADES

HCS/CV

Suitable for use with most of today’s popular oscillating multi tools (OMT), except Fein/Bosch machines utilising the “STARLOCK” blade fastening system HSS

Tooth pitch

18 tpi

tooth width pitch Blade

Cutting depth

10mm

40mm

Characteristics

Applications

bi-metal

OMT1018

bi-metal

high performance

clean cut

all wood

plastic

wood with nails

sheet metals

non ferrous

Clean cuts in all wood types. Also soft plastic and thin metal sheet and profiles.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

18 tpi

32mm

40mm

Characteristics

Applications

bi-metal bi-metal

high performance

clean cut

all wood

plastic

wood with nails

sheet metals

non ferrous

Oscillating Multi-Tool Blades

OMT3218

Clean cuts in all wood types. Also soft plastic and thin metal sheet and profiles.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

18 tpi

44mm

40mm

Characteristics

Applications

bi-metal bi-metal

high performance

clean cut

all wood

plastic

wood with nails

sheet metals

non ferrous

SAWS & HOLESAWS

OMT4418

Clean cuts in all wood types. Also soft plastic and thin metal sheet and profiles.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

18 tpi

64mm

40mm

Characteristics

Applications

bi-metal

OMT6418

bi-metal

high performance

clean cut

all wood

plastic

wood with nails

sheet metals

non ferrous

Clean cuts in all wood types. Also soft plastic and thin metal sheet and profiles.

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

89


OMT BLADES Suitable for use with most of today’s popular oscillating multi tools (OMT), except Fein/Bosch machines utilising the “STARLOCK” blade fastening system

Tooth pitch

tooth width pitch Blade

Cutting depth

n/a

50mm

30mm

Characteristics

Applications

HCS/CV

OMTSCRAPER

ground edge

alloyed tool steel

caulk

peeling paint

soft adhesives

For the removal of caulk and dried adhesives.

HSS HCS/CV

bi-metal

SAWS & HOLESAWS

Oscillating Multi-Tool Blades

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

21 tpi

85mm

20mm

Characteristics

Applications

bi-metal

OMT85

bi-metal

high performance

clean cut

all wood

plastic

non ferrous

Fine, flush cuts in wood, GRP and thin non-ferrous metal sheets.

Tooth pitch

tooth width pitch Blade

Cutting depth

GRIT

85mm

20mm

OMT85TCT

Characteristics

Applications

carbide grit

grout

mortar

For the removal of grout and mortar.

90

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


OMT BLADES

HCS/CV

For use with Bosch and Fein machines utilising the STARLOCK blade fastening system. Also compatible with older machines using the Bosch OIS shank. HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

12 tpi

35mm

50mm

Characteristics

Applications

bi-metal

SOMTJAP35

bi-metal

high performance very clean cut

all wood

plastic

perspex

gypsum board

Very clean and fast cuts in all types of wood, plastic and gypsum plasterboards.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

24 tpi

30mm

50mm

Characteristics

Applications

bi-metal bi-metal

high performance

fine cut

plastic CRP

non ferrous

aluminium

thin sheet metals

Oscillating Multi-Tool Blades

SOMT3024

Precise cut in GRP and thin sheet metal.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

18 tpi

35mm

50mm

Characteristics

Applications

bi-metal bi-metal

high performance

medium cut

all wood

plastic

wood with nails gypsum board

SAWS & HOLESAWS

SOMT3518

Medium cuts in all wood types, including wood with nails. Also soft plastic and gypsum board.

HCS/CV

HSS

Tooth pitch

tooth width pitch Blade

Cutting depth

18 tpi

50mm

50mm

Characteristics

Applications

bi-metal

SOMT5018

bi-metal

high performance

medium cut

all wood

plastic

wood with nails gypsum board

Medium cuts in all wood types, including wood with nails. Also soft plastic and gypsum boards.

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

91


Technical Data

CIRCULAR SAW BLADES

positive hook alternate top bevel

POSITIVE HOOK ANGLE FOR GENERAL WOODCUTTING

Applications

Applications • For cutting hard and soft woods using portable circular saws and stationary table saws. Positive hook angle for general purpose use, not recommended for mitre or radial arm saws.

soft wood

ø ø

SAWS & HOLESAWS

Circular Saw Blades

For Wood

boreø bush no. (mm) (mm) (mm) teeth Positive hook angle

2

Body hardened and tempered

3

Thin kerf also available

4

CNC turned bushes for a precise fit

THIN KERF Applications • For use in cordless circular saws. Thin kerf design removes less material enabling more work between battery charges.

Dimensions

ø ø

boreø bush no. (mm) (mm) (mm) teeth

Specification product code

hook tip kerf angle grind (mm) cut

laminate

• Packaging: Colour box with euro hanger.

Dimensions

1

hard wood

Specification product code

hook tip kerf angle grind (mm) cut

160

20

16 18T 1602018POS +15° ATB 2.6

160

20

16 30T 1602030POS +15° ATB 2.6

160

20

165

20

165

20

184

20

16 24T 1842024POS +15° ATB 2.6

190

30

16 24T 1903024POS +15° ATB 2.6

190

30

16 40T 1903040POS +15° ATB 2.6

190

30

16 60T 1903060POS +15° ATB 2.6

210

30

-

40T 2103040POS +15° ATB 2.6

235

30

-

30T 2353030POS +15° ATB 2.8

235

30

-

40T 2353040POS +15° ATB 2.8

235

30

-

60T 2353060POS +15° ATB 2.8

250

30

-

24T 2503024POS +15° ATB 2.8

-

48T 1602048POS* +5° ATB 2.2

16 18T 1652018POS +15° ATB 2.6 -

48T 1652048POS* +5° ATB 2.2

85

15

10 20T

851520THN +15° ATB 1.6

250

30

-

40T 2503040POS +15° ATB 2.8

136

20

10 24T 1362024THN +15° ATB 1.6

254

30

-

30T 2543030POS +15° ATB 2.8

165

20

16 24T 1652024THN +15° ATB 1.6

315

30

-

48T 3153048POS +15° ATB 3.2

* Thinner bodied blade for use in plunge saws.

Blade images for illustration purposes only

92

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


Technical Data

CIRCULAR SAW BLADES

neutral hook alternate top bevel

Applications

NEUTRAL AND NEGATIVE HOOK ANGLE FOR MITRE AND RADIAL ARM SAWS

soft wood

Applications • Neutral hook angle ATB blades for

Specification

ø ø

bore no. (mm) (mm) teeth

For Wood

3

Dimensions

ø ø

bore no. (mm) (mm) teeth

Neutral hook angle

Body hardened and tempered

Suitable for mitre saws

Specification product code

hook tip kerf angle grind (mm) cut

product code

hook tip kerf angle grind (mm) cut

190

20

24T 1902024NEU

ATB

2.6

190

20

40T 1902040NEU

ATB

2.6

210

30

32T 2103032NEU

ATB

2.6

210

30

48T 2103048NEU

ATB

2.6

216

30

48T 2163048NEU

ATB

2.8

216

30

60T 2163060NEU

ATB

2.8

250

30

60T 2503060NEU

ATB

2.8

250

30

80T 2503080NEU

ATB

2.8

260

30

60T 2603060NEU

ATB

2.8

254

30

40T 2543040NEU

ATB

2.8

305

30

40T 3053040NEU

ATB

3.2

254

30

60T 2543060NEU

ATB

2.8

305

30

60T 3053060NEU

ATB

3.2

260

30

40T 2603040NEU

ATB

2.8

Technical Data

Applications • Negative rake TCG blades for cutting aluminium and plastic.

Circular Saw Blades

Dimensions

portable and table saws.

2

laminate

SAWS & HOLESAWS

cutting hard and soft woods in mitre, radial arm,

1

hard wood

• Packaging: Colour box with euro hanger.

Applications

negative hook trapezoidal/flat

aluminium

plastic

For Aluminium

• Packaging: Colour box with euro hanger.

1

Negative hook angle

2

Body hardened and tempered

3

T: 0161 483 5557

Suitable for mitre and radial arm saws

reisser.co.uk

Dimensions

ø ø

boreø no. (mm) (mm) teeth

Specification product code

hook angle

tip grind

kerf (mm)

216

30

60T

2163060NEG

-5°

TCG

2.4

216

30

80T

2163080NEG

-5°

TCG

2.4

250

30

80T

2503080NEG

-5°

TCG

2.4

250

30

100T 25030100NEG

-5°

TCG

2.4

305

30

60T

3053060NEG

-5°

TCG

2.8

305

30

96T

3053096NEG

-5°

TCG

2.8

T: +353 579 333 314

reisser.ie

93


Characteristics

Applications

SHELL DRILL COUNTERSINKS Applications • For pre-drilling and countersinking in soft wood

spur point

soft wood

high performance

board materials

• Packaging: Retail tube.

1

Countersink angle 90°

2

High quality material • For long life.

3

Supplied with hex key and brad point drill bit

Dimensions

Retail Tube

ø

ø

12.0 12.0 12.0 12.0

3 4 5 6

drill bit   product (mm) (mm) code

SDC123 SDC124 SDC125 SDC126

Characteristics

quantity per tube 1 1 1 1

Applications

LIGHT DUTY COUNTERSINKS Applications • For countersinking in soft wood

spur point

soft wood

high performance

board materials

Countersinks

• Packaging: Retail tube.

1

Countersink angle 90°

2

High quality material

WOOD

• For long life.

3

Dimensions

ø

ø

10.0 13.0 16.0 20.0

6 6 8 8

shank   product (mm) (mm) code

Reduced shank

Retail Tube

124164 124165 124166 124167

Characteristics

quantity per tube 1 1 1 1

Applications

PLANER BLADES Applications • For solid wood and all board materials

reversible

all wood

high performance

board materials

• Packaging: Retail wallet.

1

Dimensions

Reversible carbide blade • Gives up to 20 x longer life when compared to conventional type planer blades. • Simply turn over when life has been achieved on one side.

94

T: 0161 483 5557

reisser.co.uk

length (mm)

82.0

Retail Wallet

depth (mm)

width (mm)

product code

qty per wallet

5.5

1.1

123230

2

T: +353 579 333 314

reisser.ie


Characteristics ITS

DB

O WO

T FL AOOD W T BI

3

E6.

m

m 8.0 ø =1352mm

FLAT WOOD BITS

L=

c

E6

ALLOD WO

4

& EXTENSIONS

spur point

.3

1p

ICK QU NGE A CH

0

1

4

6

9

1

1

4

1

7

8

ground cutting edges

33

22

20

quick change high performance

8

Applications

Standards • DIN3126, E6.3. soft wood

Applications

hard wood

board materials

• Packaging: Retail wallet.

• For drilling wood.

Spur point • Less splintering around the hole.

2

Ground cutting edges • Faster cutting.

3

Premium grade steel • For long service life.

4

E6.3 Shank • Compatible with E6.3 quick change tool systems. • Non-slip in 3-jaw chucks.

6.0 8.0 10.0 12.0 13.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 38.0

total length (mm)

working length product (mm) code

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

202214 202215 202216 202217 202218 202219 202220 202221 124135 202222 202223 202224 202225 202226 202227 202228 202229 202231 202233

quantity per wallet 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Flat Wood Bits

1

ø

(mm)

Retail Wallet

WOOD

Dimensions

FLAT WOOD BIT EXTENSIONS Characteristics 3

E6.

quick change

Dimensions Reisser flat bit extensions have precision milled sockets to accommodate flat bits with the E6.3 shank perfectly. Flatbits smaller than 16mm diameter are not suitable for use with these extensions. Hex key included. T: 0161 483 5557

reisser.co.uk

ø

(mm)

15.5 15.5

total length (mm) 150 300

hex socket 6.35mm

Retail Wallet

working length product (mm) code 100 250

T: +353 579 333 314

202236 202235 reisser.ie

quantity per wallet 1 1

95


Characteristics

3

E6.

4-TIP FAST AUGER BITS

sharp point

spur point

quick change high performance

Applications

Standards • DIN3126, E6.3.

soft wood

Applications • For drilling wood.

1

Dimensions

ø

Clean, sharp screw thread • For fast starting and strong pull through the material.

4-Tip Auger Bits

hard wood

board materials

• Packaging: Retail tube.

2

Spur point

3

Premium grade steel

• Less splintering around the hole.

• For long service life.

(mm)

total length (mm)

10.0 12.0 14.0 16.0 18.0 20.0 22.0 25.0 28.0 32.0

Retail Tube

working length product (mm) code

165 165 165 165 165 165 165 165 165 165

120 120 120 120 120 120 120 120 120 120

quantity per tube

4TIP10165 4TIP12165 4TIP14165 4TIP16165 4TIP18165 4TIP20165 4TIP22165 4TIP25165 4TIP28165 4TIP32165

1 1 1 1 1 1 1 1 1 1

Extensions are available for 4-tip fast augers:

4

E6.3 Shank • Compatible with E6.3 quick change tool systems. • Non-slip in 3-jaw chucks.

Use the 202236 (150mm) and 202235 (300mm) extension for diameters 16.0 - 25.0mm. Hex key included. These extensions have precision milled sockets to accommodate the E6.3 shank perfectly.

WOOD

Use the hex shank extension 1940311 for 32.0mm diameter bit.

4-TIP FAST AUGER EXTENSIONS Characteristics

Characteristics

3

E6.

quick change

hex socket 6.35mm

hex socket 11.0mm

• Packaging: Retail wallet.

Dimensions

ø

(mm)

15.5 15.5

total length (mm) 150 300

• Packaging: Retail wallet.

Dimensions

Retail Wallet

working length product (mm) code 100 250

202236 202235

quantity per wallet 1 1

socket hex

11.0

Retail Wallet

total length product (mm) code 300

1940311

Extension for 32.0mm diameter bit.

Extensions for diameters 16.0 - 25.0mm. Hex key included.

96

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

quantity per wallet 1


Characteristics

LEWIS PATTERN AUGER BITS

sharp point

Step-tip • Reduces friction and helps prevent jamming.

3

Premium grade carbon steel body

4

Hexagonal or SDS-plus shanks available

SDS-plus SHANK total length (mm)

Retail Tube flute length product (mm) code

quantity per tube

8.0

235

160

145290

1

10.0

235

160

145291

1

10.0

460

380

124120

1

12.0

235

160

145292

1

12.0

460

380

124121

1

16.0

235

160

145294

1

16.0

460

380

124124

1

18.0

460

380

124125

1

20.0

235

160

145296

1

20.0

460

380

124128

1

22.0

235

160

145297

1

22.0

460

380

124129

1

25.0

235

160

145000

1

25.0

460

380

124132

1

SDS-plus augers must be used in rotary mode ONLY T: 0161 483 5557

total length (mm)

reisser.co.uk

6.0 6.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 13.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 19.0 20.0 20.0 20.0 20.0 20.0 22.0 22.0 22.0 22.0 24.0 25.0 25.0 25.0 25.0 26.0 28.0 28.0 30.0 30.0 32.0 32.0 32.0 32.0

155 235 155 235 460 100 155 235 460 100 155 235 460 235 235 460 100 155 235 460 600 235 460 235 100 155 235 460 600 100 155 235 460 235 100 155 235 460 235 235 460 235 460 100 155 235 460

Retail Tube

flute length product (mm) code 90 160 90 160 380 60 90 160 380 60 90 160 380 160 160 380 60 90 160 380 520 160 380 160 60 90 160 380 520 60 90 160 380 160 60 90 160 380 160 160 380 160 380 60 90 160 380

114065 124065 114066 124066 124080 124102 114067 124067 124081 124103 114068 124068 124082 130235 124069 124083 124106 114070 124070 124084 142653 124071 124085 190235 124107 114072 124072 124086 142655 124108 114073 124073 124087 124074 124109 207716 207717 207718 124075 124076 280460 124077 300460 124117 124118 124078 320460

T: +353 579 333 314

reisser.ie

quantity per tube 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Auger Bits

• For fast starting and strong pull through the material.

ø

ø

(mm)

Clean, sharp screw thread

Dimensions

soft wood

WOOD

Dimensions

2

hard wood

HEXAGONAL SHANK

• For drilling hard and soft wood.

(mm)

high performance

• Packaging: Retail tube.

Applications

1

Applications

97


Type

Type

Type

Type

Type

N

H

Ti

U-TL

W

DIN

DIN

DIN

DIN

338

340

345

1869

HSS

HSS-E

HCS

DIN

DIN

335

7483G

FORSTNER BITS

Co5

DIN Characteristics

Applications

1897

standard

high performance

all wood

board materials

• Packaging: Retail tube.

Applications • For drilling blind holes in wood.

Dimensions

1 2

Radial edges for clean, flat bottomed holes

Holes can be drilled overlapping each other

Bits & Brad Point

3

Centre point for accurate drilling

ø

(mm)

total length shank product (mm) (mm) code

10.0 12.0 14.0 15.0 16.0 18.0 20.0 22.0 24.0 25.0 26.0 28.0 30.0 32.0 35.0 40.0

92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10

124138 124139 124140 124141 124142 124143 124144 124145 124146 124147 124148 124149 124150 124151 124152 124153

Characteristics

quantity per tube 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Applications

ITS

DB

O WO

WOOD

Retail Tube

AD BR INT BIT PO OOD W m .0 m ø==856mm

BRAD POINT WOOD DRILLS

L

4

3

98

high performance

1

4

6

9

1

1

4

1

7

8

8

all wood

board materials

• Packaging: Retail wallet.

2

81

Dimensions

ø

2

0

5 10

(mm)

Spur Points

RD HA OOD W

FT SO OD WO

Applications • For drilling wood.

1

spur point

c

1p

total length (mm)

Retail Wallet

flute length product (mm) code

quantity per wallet

3.0

61

30

105810

1

4.0

75

43

105811

1

5.0

86

50

105812

1

Wide Flute Pattern

6.0

93

52

105813

1

• To prevent clogging.

7.0

109

68

105814

1

8.0

117

75

105815

1

• Reduce splintering around the hole.

9.0

125

78

105816

1

Premium Material

10.0

133

80

105817

1

• Made from high quality bearing steel for long service life.

11.0

142

90

105818

1

12.0

151

100

105819

1

T: +353 579 333 314

reisser.ie

T: 0161 483 5557

reisser.co.uk


Characteristics D DH P TZ SQ HEX SQD P D TO PZ PHD PHD PZD SLT T T LT ZD QD S T S1/4” hex drive high performance torsion zone SL SLall tip 2 mD D EX ZDtypes D X PZ 00mZ Z T H P PH HE x1 T • Retail packaging: Wallet and Handi-Pak. D D D PZ 1PpcZ PZ S BIT

DR

EW

SCR

R IVE

N

IO RS

TORSION SCREWDRIVER BITS

5

0

3

3

5

4

3

0

4

4

7

6

2

58-62 HRC hardness

• Bulk packaging: Box.

0W

10

2 PZ0

1

Precision milled • For an accurate fit.

2

Torsion zone • To increase flexibility and reduce snapping.

3

Super tough V5 tool steel • For wear resistance and durability.

4

E6.3 Shank (C6.3 available) • Compatible with E6.3 quick change tool systems. • Non-slip in 3-jaw chucks.

Standards • DIN3126 C6.3 & E6.3. Applications

Dimensions tip type size

PZD PZD PZD PZD PZD PZD PZD PZD PZD PHD PHD PHD PHD PHD PHD TXD TXD TXD TXD TXD TXD SQD SQD SQD SQD SLD SLD SLD SLD HXD HXD HXD HXD KOD

No.1 No.2 No.3 No.4 No.1 No.2 No.3 No.2 No.2 No.1 No.2 No.3 No.1 No.2 No.3 T10 T15 T20 T25 T30 T40 No.1 No.2 No.3 No.2 3.5 x 0.6 4.5 x 0.6 5.5 x 0.8 6.0 x 1.0 3 4 5 6 No.2

Retail Wallet Retail Handi-Pak

bit shank lgth type (mm) C6.3 C6.3 C6.3 C6.3 E6.3 E6.3 E6.3 E6.3 E6.3 C6.3 C6.3 C6.3 E6.3 E6.3 E6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 E6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 C6.3

E6.3

25 25 25 38 50 50 50 100 150 25 25 25 50 50 50 25 25 25 25 25 25 25 25 25 50 25 25 25 25 25 25 25 25 25

Loose Bag

Bulk Box

wallet product code

pcs per wallet

handi-pak product code

pcs per pack

bag product code

pcs per bag

box product code

pcs per box

PZ01W PZ02W PZ03W PZ04W PZ0150W PZ0250W PZ0350W PZ02100W PZ02150W PH01W PH02W PH03W PH0150W PH0250W PH0350W T10W T15W T20W T25W T30W T40W R1W R2W R3W R250W 3506W 4506W 5508W 6010W HX3W HX4W HX5W HX6W KO2W*

2 2 2 1 1 1 1 1 1 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2

PZ01PB PZ02PB PZ03PB PZ04PB PZ0150PB PZ0250PB PZ0350PB PZ02100PB PZ02150PB PH01PB PH02PB PH03PB PH0150PB PH0250PB PH0350PB T10PB T15PB T20PB T25PB T30PB T40PB R1PB R2PB R3PB R250PB 3506PB 4506PB 5508PB 6010PB HX3PB HX4PB HX5PB HX6PB KO2PB*

10 10 10 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

PZ01L PZ02L PZ03L PZ04L PZ0150L PZ0250L PZ0350L PZ02100L PZ02150L PH01L PH02L PH03L PH0150L PH0250L PH0350L T10L T15L T20L T25L T30L T40L R1L R2L R3L R250L 3506L 4506L 5508L 6010L HX3L HX4L HX5L HX6L K02L*

10 10 10 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

PZ01B PZ02B PZ03B ---- PZ0150B PZ0250B PZ0350B ---- ---- PH01B PH02B PH03B PH0150B PH0250B PH0350B ---- ---- ---- ---- T30B ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----

100 100 100 -50 50 50 --100 100 100 50 50 50 ----100 ---------------

*Standard S2 material, non-torsion.

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

99

Torsion

C6.3

SCREWDRIVER BITS

• For driving screws into wood, plastic and metal sheet.


Characteristics E

RIV

WD

ITS RB

E SCR ION RS T TO PAC IM

TORSION IMPACT SCREWDRIVER BITS AND ACCESSORIES

58-62

cs

2p x2

2 PZ

5

0

3

3

5

4

3

0

4

4

3

9

1/4” hex drive high performance

7

W

IM

Applications

SCREWDRIVER BITS

Torsion Impact

tip type size

C6.3

PZD PZD TXD TXD TXD TXD PZD PZD PZD TXD TXD TXD TXD

No.2 No.3 T20 T25 T30 T40 No.2 No.3 No.2 T20 T25 T30 T40

C6.3 C6.3 C6.3 C6.3 C6.3 C6.3 E6.3 E6.3 E6.3 E6.3 E6.3 E6.3 E6.3

25 25 25 25 25 25 50 50 90 50 50 50 50

quick change

1

Special PZ tip design • To help prevent breakage when used in impact drivers.

2

Torsion zone • To increase flexibility and reduce snapping.

3

Super tough V5 tool steel • For wear resistance and durability.

4

E6.3 Shank (C6.3 available) • Compatible with E6.3 quick change tool systems. • Non-slip in 3-jaw chucks.

E6.3

Retail Wallet Retail Handi-Pak

bit shank lgth type (mm)

hardness

• Bulk packaging: Box.

• DIN3126 C6.3 & E6.3.

Dimensions

torsion zone

• Retail packaging: Wallet and Handi-Pak.

Z02 PP

Standards

• For driving screws into wood.

3

E6.

HRC

m 5m

Loose Bag

Bulk Box

wallet product code

pcs per wallet

handi-pak product code

pcs per pack

bag product code

pcs per bag

box product code

pcs per box

IMPPZ02W IMPPZ03W IMPT20W IMPT25W IMPT30W IMPT40W IMPPZ0250W IMPPZ0350W IMPPZ0290W IMPT2050W IMPT2550W IMPT3050W IMPT4050W

2 2 2 2 2 2 1 1 1 1 1 1 1

IMPPZ02PB IMPPZ03PB IMPT20PB IMPT25PB IMPT30PB IMPT40PB IMPPZ0250PB IMPPZ0350PB IMPPZ0290PB IMPT2050PB IMPT2550PB IMPT3050PB IMPT4050PB

10 10 10 10 10 10 10 10 10 10 10 10 10

IMPPZ02L IMPPZ03L IMPT20L IMPT25L IMPT30L IMPT40L IMPPZ0250L IMPPZ0350L IMPPZ0290L IMPT2050L IMPT2550L IMPT3050L IMPT4050L

10 10 10 10 10 10 10 10 10 10 10 10 10

IMPPZ02B IMPPZ03B ---- ---- IMPT30B ---- IMPPZ0250B IMPPZ0350B ---- ---- ---- IMPT3050B ----

100 100 --100 -50 50 ---50 --

SCREWDRIVER BITS

TORSION IMPACT 2pcs

PZ2 x 25mm 5

033543 044397

IMPPZ02W

Wallets with 1 or 2 pieces

100

T: 0161 483 5557

Clear, plastic handi-pak box with 10 pieces

reisser.co.uk

Loose bag with 5 or 10 pieces

T: +353 579 333 314

Bulk box with 50 or 100 pieces

reisser.ie


SCREWDRIVER BIT ACCESSORIES description shank length socket type (mm)

Magnetic Adaptor 1/4” Hex

Loose Bag

Bulk Box

wallet product code

pcs per wallet

handi-pak product code

pcs per pack

bag product code

pcs per bag

box product code

pcs per box

E6.3

60

MAGW

1

MAGPB

10

MAGL

10

MAGB

25

Magnetic Adaptor & Circlip 1/4” Hex

E6.3

60

MAGCW

1

MAGCPB

10

MAGCL

10

MAGCB

25

----

----

E6.3 150 MAGC150W 1 MAGC150PB 5 MAGC150L 5 Magnetic Adaptor & Circlip 1/4” Hex All S/S Magnetic Adaptor & Circlip 1/4” Hex

E6.3

60

MAGSSW

1

MAGSSPB

10

MAGSSL

10

MAGSSB

25

Quick Release Magnetic Adaptor 1/4” Hex

E6.3

60

QRW

1

QRPB

5

QRL

5

QRB

25

Quick Release Magnetic Adaptor 1/4” Hex

E6.3 150 QR150W 1 QR150PB 5 QR150L 5

----

----

Magnetic Adaptor 1/4” Hex

SDS+

75

SDSW

1

----

----

----

-----

----

----

Magnetic Nut Setter 8mm/ 5/16”

E6.3

65

NS8W

1

NS8PB

5

NS8L

5

NS8B

25

IMPACT “All Hex” Adaptor 1/4” Hex

E6.3

60

AHAW

1

AHAPB

5

AHAL

5

AHAB

10

IMPACT Magnetic Nut Setter 8mm/ 5/16”

E6.3

65

IMPNS8W

1

IMPNS8PB

5

IMPNS8L

5

IMPNS8B

10

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

101

Accessories

Retail Wallet Retail Handi-Pak

SCREWDRIVER BITS

Dimensions


HACKSAW FRAMES AND REPLACEMENT BLADES Dimensions

length (mm) t.p.i. product code

Bulk pcs per wallet product code

pcs per pack

Premium Hacksaw Frame & Bi-Metal Blade

300

24

-----

--

601501

1

Premium Junior Hacksaw Frame & blade

150

32

-----

--

601500

1

Standard Hacksaw Frame & Bi-Metal Blade

300

24

-----

--

124168

1

Standard Junior Hacksaw Frame & Blade

150

32

601497

1

-----

--

Bi-Metal Hacksaw Blade

300

18

HSB30018W

2

234970T

100

Bi-Metal Hacksaw Blade

300

24

HSB30024W

2

235970T

100

Bi-Metal Hacksaw Blade

300

32

HSB30032W

2

236970T

100

Junior Hacksaw Blade for Metal

150

32

615032M

100 (10x10)

-----

--

Junior Hacksaw Blade for Wood

150

14

615014W

100 (10x10)

-----

--

SAWS

Hacksaws

description

Wallet

102

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


SETS HSS DRILL SETS

104-106

10pc. DIN338 HSS Cobalt Jobber Drill Set

104

10pc. DIN338 HSS Ti-N Coated Jobber Drill Set

104

10pc. DIN338 HSS Fully Ground Jobber Drill Set

104

10pc. DIN338 HSS Roll Forged Jobber Drill Set

104

19pc. DIN338 HSS Cobalt Jobber Drill Set

105

25pc. DIN338 HSS Cobalt Jobber Drill Set

105

19pc. DIN338 HSS Ti-N Coated Jobber Drill Set

105

25pc. DIN338 HSS Ti-N Coated Jobber Drill Set

105

19pc. DIN338 HSS Fully Ground Jobber Drill Set

105

25pc. DIN338 HSS Fully Ground Jobber Drill Set

105

19pc. DIN338 HSS Roll Forged Jobber Drill Set

105

25pc. DIN338 HSS Roll Forged Jobber Drill Set

105

5pc. DIN340 HSS Long Series Drill Set

TILE DRILL SETS

106

106

5pc. TCT Spear Point Tile Drill Set

106

5pc. TCT Premium Tile Drill Set

106

5pc. Diamond Tile Drill Set

106

MASONRY BIT SETS

107-109

5pc. Zentro SDS-plus Hammer Bit Set

107

7pc. Zentro SDS-plus Hammer Bit Set

107

5pc. Speedster SDS-plus Hammer Bit Set

107

7pc. Speedster SDS-plus Hammer Bit Set

107

5pc. PowerBohr SDS-plus Hammer Bit Set

108

7pc. PowerBohr SDS-plus Hammer Bit Set

108

9pc. PowerBohr SDS-plus Hammer Bit Set

108

4pc. Powerspaten Chisel Set

108

5pc. Prem-Plus Straight Shank Masonry Bit Set

109

5pc. Kombi Multi-Purpose Set

109

HOLESAW SETS

109

10pc. Electrician’s Cobalt Bi-Metal Hole Saw Set

109

8pc. Plumber’s Cobalt Bi-Metal Hole Saw Set

109

8pc. Handyman’s Cobalt Bi-Metal Hole Saw Set

109

SCREWDRIVER BITS

110-111

26pc. Torsion Screwdriver Bit Set

110

18pc. Torsion Impact Screwdriver Bit Set

110

‘Tic-Tac’ Screwdriver Bit Box CDU’s

111


HSS DIN338 JOBBER DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS HSS COBALT 10pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS Cobalt Jobber Drill Set HSS Cobalt Jobber Drill Set c/w euro hanger

3.0/3.2/3.5/4.0/4.5/ HSSCOSET10 5.0/5.5/6.0/6.5/7.0 3.0/3.2/3.5/4.0/4.5/ HSSCOSET10H 5.0/5.5/6.0/6.5/7.0

Counter Display Unit

16 x HSSCOSET10

HSSCOSETCDU

10 piece set

Counter Display Unit (CDU)

HSS TI-N COATED 10pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS T-iN Coated Jobber Drill Set

3.0/3.2/3.5/4.0/4.5/ HSSTINSET10 5.0/5.5/6.0/6.5/7.0

HSS T-iN Coated Jobber Drill Set c/w euro hanger

3.0/3.2/3.5/4.0/4.5/ HSSTINSET10H 5.0/5.5/6.0/6.5/7.0

Counter Display Unit

16 x HSSTINSET10

HSSTINSETCDU Counter Display Unit (CDU)

HSS GROUND 10pc. JOBBER DRILL SETS

SETS

HSS

10 piece set

description contents (mm)

product code

HSS Ground Jobber Drill Set HSS Ground Jobber Drill Set c/w euro hanger

3.0/3.2/3.5/4.0/4.5/ HSSGSET10 5.0/5.5/6.0/6.5/7.0 3.0/3.2/3.5/4.0/4.5/ HSSGSET10H 5.0/5.5/6.0/6.5/7.0

Counter Display Unit

16 x HSSGSET10

HSSGSETCDU

10 piece set

Counter Display Unit (CDU)

HSS ROLL FORGED 10pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS Roll Forged Jobber Drill Set

3.0/3.2/3.5/4.0/4.5/ 5.0/5.5/6.0/6.5/7.0

HSSRSET10

HSS Roll Forged Jobber Drill Set c/w euro hanger

3.0/3.2/3.5/4.0/4.5/ 5.0/5.5/6.0/6.5/7.0

HSSRSET10H

Counter Display Unit

16 x HSSRSET10

HSSRSETCDU

10 piece set

104

Counter Display Unit (CDU)

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


HSS DIN338 JOBBER DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS HSS COBALT 19 & 25pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS Cobalt 19pc. Jobber Drill Set

1.0-10.0 x 0.5

138796

HSS Cobalt 25pc. Jobber Drill Set

1.0-13.0 x 0.5

138797

19 piece set

25 piece set

HSS TI-N COATED 19 & 25pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS T-iN Coated 19pc. Jobber Drill Set

1.0-10.0 x 0.5

TINSET19

HSS T-iN Coated 25pc. Jobber Drill Set

1.0-13.0 x 0.5

TINSET25

19 piece set

25 piece set

description contents (mm)

product code

HSS Ground 19pc. Jobber Drill Set

1.0-10.0 x 0.5

146028

HSS Ground 25pc. Jobber Drill Set

1.0-13.0 x 0.5

146029

19 piece set

SETS

HSS

HSS GROUND 19 & 25pc. JOBBER DRILL SETS

25 piece set

HSS ROLL FORGED 19 & 25pc. JOBBER DRILL SETS

description contents (mm)

product code

HSS Roll Forged 19pc. Jobber Drill Set

1.0-10.0 x 0.5

201897

HSS Roll Forged 25pc. Jobber Drill Set

1.0-13.0 x 0.5

201898

19 piece set T: 0161 483 5557

25 piece set reisser.co.uk

T: +353 579 333 314

reisser.ie

105


HSS DIN340 LONG DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS HSS DIN340 LONG SERIES 5pc. FULLY GROUND DRILL SETS

5 piece set

description contents (mm)

product code

HSS Long Series Fully Ground Drill Set

3.0 x 100/4.0 x 119/5.0 x 132/ HSSGLSET5 6.0 x 139/7.0 x 156

HSS Long Series Fully Ground Drill Set c/w euro hanger

3.0 x 100/4.0 x 119/5.0 x 132/ HSSGLSET5H 6.0 x 139/7.0 x 156

Counter Display Unit

18 x HSSGLSET5

HSSGLSETCDU Counter Display Unit (CDU)

TILE DRILL SETS TCT SPEAR POINT 5pc. TILE DRILL SETS

HSS & Tile Drills

description contents (mm)

product code

TCT Spear Point Tile Drill Set

4.0/5.0/6.0/7.0/8.0

SPD5SET

TCT Spear Point Tile Drill Set c/w euro hanger

4.0/5.0/6.0/7.0/8.0

SPD5SETH

Counter Display Unit

18 x SPD5SET

SPD5SETCDU

5 piece set Counter Display Unit (CDU) (example only)

SETS

TCT PREMIUM 5pc. TILE DRILL SETS

description contents (mm)

product code

TCT Premium Tile Drill Set

4.0/5.0/6.0/7.0/8.0

PTD5SET

TCT Premium Tile Drill Set c/w euro hanger

4.0/5.0/6.0/7.0/8.0

PTD5SETH

Counter Display Unit

18 x PTD5SET

PTD5SETCDU

5 piece set Counter Display Unit (CDU) (example only)

DIAMOND 5pc. TILE DRILL SETS

description contents (mm)

product code

Diamond Tile Drill Set

5.0/6.0/7.0/8.0/10.0

TDD5SET

Diamond Tile Drill Set c/w euro hanger

5.0/6.0/7.0/8.0/10.0

TDD5SETH

Counter Display Unit

18 x TDD5SET

TDD5SETCDU

5 piece set Counter Display Unit (CDU) (example only)

106

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


MASONRY DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS ZENTRO 5pc. SDS-plus HAMMER BIT SETS

description contents (mm)

product code

ZENTRO SDS-plus Hammer Bit Set

5.0/5.5/6.0/7.0/8.0 x 160

ZENTRO5SET

ZENTRO SDS-plus c/w euro hanger

5.0/5.5/6.0/7.0/8.0 x 160

ZENTRO5SETH

Counter Display Unit

18 x ZENTRO5SET

ZENTRO5SETCDU

5 piece set

Counter Display Unit (CDU)

ZENTRO 7pc. SDS-plus HAMMER BIT SETS

description contents (mm) ZENTRO SDS-plus Hammer Bit Set

product code

5.0/5.5/6.0/6.5/ 7.0/8.0/10.0 x 160

ZENTRO7SET

Masonry

7 piece set

SPEEDSTER 5pc. SDS-plus HAMMER BIT SETS description contents (mm)

product code

SPEEDSTER SDS-plus Hammer Bit Set

5.0/5.5/6.0/7.0/8.0 x 160

SPEED5SET

SPEEDSTER SDS-plus c/w euro hanger

5.0/5.5/6.0/7.0/8.0 x 160

SPEED5SETH

Counter Display Unit

18 x SPEED5SET

SETS

SPEED5SETCDU

5 piece set

Counter Display Unit (CDU) (example only)

SPEEDSTER 7pc. SDS-plus HAMMER BIT SETS

description contents (mm) SPEEDSTER SDS-plus Hammer Bit Set

5.0/5.5/6.0/6.5/ 7.0/8.0/10.0 x 160

product code SPEED7SET

7 piece set T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

107


MASONRY DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS POWERBOHR 5pc. SDS-plus HAMMER BIT SETS

5 piece set

description contents (mm)

product code

PowerBohr SDS-plus Hammer Bit Set

5.0/5.5/6.0/7.0/8.0 x 160

POWER5SET

PowerBohr SDS-plus c/w euro hanger

5.0/5.5/6.0/7.0/8.0 x 160

POWER5SETH

Counter Display Unit

18 x POWER5SET

POWER5SETCDU Counter Display Unit (CDU)

POWERBOHR 7pc. SDS-plus HAMMER BIT SETS

description contents (mm) POWERBOHR SDS-plus Hammer Bit Set

product code

5.0/5.5/6.0/6.5/ 7.0/8.0/10.0 x 160

POWER7SET

Masonry

7 piece set

POWERBOHR 9pc. SDS-plus HAMMER BIT SETS

SETS

description contents (mm) POWERBOHR SDS-plus Hammer Bit Set

product code

5.0/5.5/6.0/7.0 x 160 8.0/10.0/12.0 x 210 6.0/6.5 x 260

PSET

POWERSPATEN CHISEL SETS POWERSPATEN 4pc. CHISEL SETS

description contents (mm) POWERSPATEN SDS-plus Chisel Set

108

T: 0161 483 5557

reisser.co.uk

250 Point x 1 20 x 250 Chisel x 1 40 x 250 Chisel x 1 40 x 250 Tile Chisel x 1

product code CSET

T: +353 579 333 314

reisser.ie


MASONRY DRILL SETS

c/w COUNTER TOP DISPLAY OPTIONS PREM PLUS 5pc. MASONRY BIT SETS

5 piece set

description contents (mm)

product code

Prem Plus Masonry Bit Set

5.0/5.5/6.0/7.0/8.0 x 150

PREM5SET

Prem Plus Masonry Bit Set c/w euro hanger

5.0/5.5/6.0/7.0/8.0 x 150

PREM5SETH

Counter Display Unit

18 x PREM5SET

PREM5SETCDU Counter Display Unit (CDU)

KOMBI MULTI-PURPOSE 5pc. SETS

5 piece set

description contents (mm)

product code

Kombi Multi-Purpose Bit Set

5.0/5.5/6.0/7.0/8.0 x 150

KOMBI5SET

Kombi Multi-Purpose Bit Set c/w euro hanger

5.0/5.5/6.0/7.0/8.0 x 150

KOMBI5SETH

Counter Display Unit

18 x KOMBI5SET

KOMBI5SETCDU Counter Display Unit (CDU)

HOLESAW SETS

description contents (mm) Electrician’s Set Plumber’s Set Handyman’s Set

T: 0161 483 5557

reisser.co.uk

SETS

ELECTRICIAN’S, PLUMBER’S & HANDYMAN’S COBALT BI-METAL HOLESAW SETS product code

16/20/25/32/35/44/51/64 AS1 and AS2 Arbors 19/22/29/38/44/57 AS1 and AS2 Arbors 20/25/29/32/38/51 AS1 Arbor and Adaptor

HSS & Holesaws

EHSK PHSK HHSK

T: +353 579 333 314

reisser.ie

109


SCREWDRIVER BIT SETS

c/w COUNTER TOP DISPLAY OPTIONS TORSION BIT SETS

description contents (mm) Torsion Screwdriver Bit Set 26pc

product code

PH1, PH2, PH3 PZ1 x 2, PZ2 x 3, PZ3 x 2 Hexagonal 3, 4, 5, & 6 Square drive No.2 Slotted 3.5, 4.5, 5.5 & 6.0 Star T10, T15, T20, T25, T30 & T40 Quick change bit holder

TORSIONDBSET

Counter Display Unit 10 x TORSIONDBSET

TORDBCDU

26 piece set Counter Display Unit (CDU)

TORSION IMPACT BIT SETS

SETS

Screwdriver Bits

description contents (mm) Torsion Impact Screwdriver Bit Set 18pc

product code

PZ2 x 6, PZ3 x 2, PZ2 x 90 Star T20 x 2, T25 x 2, T30 x 2 & T40 x 2 “All Hex” impact bit holder

Counter Display Unit 10 x IMPACTDBSET

IMPACTDBSET

IMPDBCDU

18 piece set

Counter Display Unit (CDU)

COMBINED TORSION & TORSION IMPACT BIT SET CDU

contents 5 x Torsion Screwdriver Bit Set 26pc 5 x Torsion Impact Screwdriver Bit Set 18pc Counter Display Unit 5 x TORSIONDBSET 5 x IMPACTDBSET

product code TORSIONDBSET

IMPACTDBSET

MIXDBCDU

Mixed Display Unit (CDU)

110

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


SCREWDRIVER BITS IN ‘TIC-TAC’ BOXES c/w COUNTER TOP DISPLAY UNITS TORSION PZ2 25pc. BIT ‘TIC-TAC’ BOX CDU

description contents (mm) Torsion screwdriver bits Counter Display Unit

no. of bits per TT box

product code

PZ2 x 25

25

PZ02TT25

12 x PZ02TT25

-

PZ02TTCDU

For a CDU of 12 “Tic Tac” boxes, order 1 x PZ02TT25CDU. Individual “Tic Tac” boxes not available separately.

description contents (mm) Torsion screwdriver bits Counter Display Unit

no. of bits per TT box

product code

PH2 x 25

25

PH02TT25

12 x PH02TT25

-

PH02TTCDU

Screwdriver Bits

TORSION PH2 25pc. BIT ‘TIC-TAC’ BOX CDU

For a CDU of 12 “Tic Tac” boxes, order 1 x PH02TT25CDU.

SETS

Individual “Tic Tac” boxes not available separately.

TORSION IMPACT PZ2 25pc. ‘TIC-TAC’ BOX CDU

description contents (mm)

no. of bits per TT box

product code

PZ2 x 25

25

IMPPZ02TT25

12 x IMPPZ02TT25

-

IMPPZ02TTCDU

Torsion Impact screwdriver bits Counter Display Unit

For a CDU of 12 “Tic Tac” boxes, order 1 x IMPPZ02TT25CDU. Individual “Tic Tac” boxes not available separately.

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

111


Prefer to work online? visit our website at reisser.co.uk

• Easy to use • Fully interactive • Informative • Browse full product ranges • View latest promotions • Place orders online

Contact your sales representative to obtain your distributor login details.


MERCHANDISING STANDARD DEPOTS

114-120

System Components

114-115

1m Mixed Depot

116-119

Mixed PTA Extension Panel

MASONRY

120

121-127, 145

Zentro SDS-max Hammer Drills

121

Zentro SDS-plus Hammer Drills

122

Speedster SDS-plus Hammer Drills

123-124

PowerBohr SDS-plus Hammer Drills

125-126

Prem Plus Masonry Drills

127

Powerspaten Chisels

145

TILES AND MULTI-PURPOSE

128

Kombi TCT Multi-Purpose Drills

128

Spear Tip, Premium & Diamond Tile Drills

128

HSS

129-133

HSS Bulk CDUs

129

HSS Cobalt Jobber Drills

130

HSS Ti-N Coated Jobber Drills

131

HSS Fully Ground Jobber Drills

132

HSS Reduced Shank Blacksmithâ&#x20AC;&#x2122;s Drills & HSS Long Series Drills

133

SAWS AND HOLESAWS

134-135

Cobalt Bi-Metal Holesaws and Arbors

134

Jigsaw Blades and Sabre Saw Blades

135

WOOD Flat Wood Bits and Brad Point Bits Auger Bits Countersinks / Brad Point Drills

SCREWDRIVER BITS

136-139 136 137-138 139

139-142

Screwdriver Bit Accessories

139

Torsion & Torsion Impact Driver Bits

140

Screwdriver Bit Extension Panel

141

Screwdriver Bit and Accessories CDU

142

COMBI-MODULES

143-144

Wood

143

HSS / Masonry

144

CHUCKS Chucks and Adaptors

145 145


MERCHANDISING SYSTEM COMPONENTS

Extension Panel

1m Depot 1

1m Depot

1m Depot 1

2

3

2

+

=

1

2

3

1m PTA Depot

PLUS

1m Full Height Display

Accepts one row of modules PLUS large rail

Extension Panel

Accepts two rows of modules PLUS large rail H=2125mm W=1000mm D=630mm

MERCHANDISING

Components

H=1625mm W=1000mm D=630mm

Holesaw Module

3-Tier Module

3-Tier Module

Hang/Freestanding H=750mm W=475mm D=200mm H=750mm W=325mm D=200mm

325mm width. Hang/Freestanding

475mm width. Hang/Freestanding

H=670mm W=325mm D=320mm

H=670mm W=475mm D=320mm

Curved Top CDU

HSS Bulk CDU

Driver Bit CDU

Freestanding

Freestanding

Freestanding

H=585mm W=380mm D=240mm

H=230mm W=375mm D=200mm

H=160mm W=335mm D=525mm

114

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


MERCHANDISING SYSTEM COMPONENTS

PTA Large Rail Allows extra small items to be displayed below the modules.

100mm Single Prong Hook For items with single hole packaging. Top and middle module tiers will only take 100mm hooks.

140mm Single Prong Hook For items with single hole packaging. For module bottom tiers and extension panels/CDUs.

100mm Euro Hook For items with euro hole packaging. Top and middle module tiers will only take 100mm hooks.

140mm Euro Hook Swing Tag Supplier : www.aalabels.com - Product Ref : AAS070

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BIT

TORSION SCREWDRIVER BIT

TORSION SCREWDRIVER BIT

PZ1x25mm

PZ2 x 25mm

PZ3 x 25mm

PZ4 x 38mm

PZ1 x 50mm

PZ2 x 50mm

PZ3 x 50mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BIT

TORSION SCREWDRIVER BIT

TORSION SCREWDRIVER BIT

PH1 x 25mm

PH2 x 25mm

PH3 x 25mm

PH1 x 50mm

PH2 x 50mm

PH3 x 50mm

KO2 x 25mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PZ02W

PH01W

PH02W

PH03W

PH0150W

PZ0150W

PH0250W

PZ0250W

PH0350W

PZ0350W

KO2W

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

T15 x 25mm

T20 x 25mm

T25 x 25mm

T30 x 25mm

T40 x 25mm

SQ.2 x 25mm

PRODUCT CODE

T10W

PRODUCT CODE

T15W

PRODUCT CODE

T20W

T25W

PRODUCT CODE

T30W

PRODUCT CODE

T40W

PRODUCT CODE

R2W

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

3.5 x 0.6mm

4.5 x 0.8mm

5.5 x 0.8mm

6.0 x 1.0mm

PZ2 x 25mm

PZ3 x 25mm

T20 x 25mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

3.0 x 25mm

4.0 x 25mm

5.0 x 25mm

6.0 x 25mm

T25 x 25mm

T30 x 25mm

T40 x 25mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

MAGNETIC ADAPTOR

MAGNETIC ADAPTOR

MAGNETIC ADAPTOR

3506W

4508W

HX3W

/4”

1

x 60mm

/4”

1

/4”

1

x 60mm

MAGCW

QUICK RELEASE MAGNETIC ADAPTOR

/4”

1

PRODUCT CODE

QR150W

IMPACT NUT SETTER

IMPACT ADAPTOR

/4”

x 65mm

PRODUCT CODE

x 150mm

PRODUCT CODE

QRW

1

x 60mm

PRODUCT CODE

MAGW

QUICK RELEASE MAGNETIC ADAPTOR

5508W

HX4W

PRODUCT CODE

0161 483 5557

PZ04W

T10 x 25mm PRODUCT CODE

Please fill this space with

PZ03W

/4”

1

x 65mm

6010W

HX5W

/4”

1

x 60mm

PRODUCT CODE

MAGSSW

MAGNETIC ADAPTOR

/4”

1

x SDS+

PRODUCT CODE

SDSW

HX6W

MAGNETIC ADAPTOR

/4”

1

x 150mm

PRODUCT CODE

MAGC150W

NUT SETTER

8mm/ 5/16” PRODUCT CODE

NS8W

IMPPZ02W

IMPT25W

IMPPZ03W

IMPT30W

IMPT20W

IMPT40W

TORSION IMPACT SCREWDRIVER BIT

TORSION IMPACT SCREWDRIVER BIT

TORSION IMPACT SCREWDRIVER BIT

PZ2 x 50mm

PZ3 x 50mm

T20 x 50mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

TORSION IMPACT SCREWDRIVER BIT

TORSION IMPACT SCREWDRIVER BIT

TORSION IMPACT SCREWDRIVER BIT

T25 x 50mm

T30 x 50mm

T40 x 50mm

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

IMPPZ0250W

IMPT2550W

IMPPZ0350W

IMPT3050W

IMPT2050W

IMPT4050W

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

TORSION SCREWDRIVER BITS

PZ2 x 25mm (10)

PZ3 x 25mm (10)

PZ2 x 50mm (10)

PZ3 x 50mm (10)

PZ2 x 25mm (10)

PRODUCT CODE

PRODUCT CODE

IMPNS8W

PZ02PB

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

TORSION SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BIT

TORSION IMPACT SCREWDRIVER BITS

TORSION IMPACT SCREWDRIVER BIT

T30 x 25mm (10)

PZ2 x 25mm (10)

PZ3 x 25mm (10)

PZ2 x 50mm

PZ3 x 50mm (10)

T30 x 25mm (10)

T30 x 50mm (10)

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

PRODUCT CODE

AHAW

T30PB

IMPPZ02PB

IMPPZ03PB

PZ03PB

PRODUCT CODE

IMPPZ0250PB

PZ0250PB

IMPPZ0350PB

PZ0350PB

IMPT30PB

PH02PB

Backing Cards and Label Prints For items with rail system, extension panels and curved top CDUs to identify product placement.

IMPT3050PB

Module/CDU Label Prints To complete the display and provide relevant product and re-order information to the distributor/user.

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

115

MERCHANDISING

PZ01W

Attach to Euro hooks for displaying stock re-order labels prominently.

Components

For items with euro hole packaging. For module bottom tiers and extension panels/CDUs.


POINT OF SALE DISPLAYS AND FIXTURES

Modular Display System

Already have a depot?

Adaptable and expandable!

Power Tool Accessory Header Panel

Hold the exact stock profile you need.

Why not easily expand your display with this additional header.

Hook and rail system to allow flexibility of stock and layout

Gondola type shelving fits easily alongside most standard shop fitting installations. • 1 metre wide stand with 5 adjustable shelves. • Versatility, various components can be retro fitted to suit a changing profile. • Extension panel can be added when the stand is to be wall mounted bringing the height into line with existing merchandising.

Depots

• Can be combined with Power Tool Accessory display systems to provide a combined merchandising solution.

1) Start with... Screw stand

4

MERCHANDISING

2) Increase to... Power Tool Gondola

2

1

3) Expand to... Additional Product

3

Gondola

4) Enhance with... Power Tool Header

Reisser Vinyl Banner For instant brand impact

116

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


MIXED DEPOT DISPLAY UNIT

Stock Layout 325mm Module

325mm Module

325mm Module

1 2 3 4 5 6

1 2 3 4 5 6

1 2

3

4

1 2 3 4 5 6

1 2 3 4 5 6

1 2

3

4

1 2 3 4 5 6

1 2 3 4 5 6

1

2

3

325mm Module

325mm Module

325mm Module

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

1 1

2

3 2

4 3

MERCHANDISING

1 2 3 4 5 6 1 2 3 4 5 1 2 3 4 5 6 7 1 2 3 4 5

Display Unit

A MIX OF OUR TOP SELLING PTA LINES TO MAXIMISE EARNINGS FROM A 1m DEPOT T: 0161 483 5557

reisser.co.uk

1

2

3

1

2

3

1

T: +353 579 333 314

2

3

reisser.ie

Depots

Lower Rail

4

117


MIXED DEPOT DISPLAY UNIT

Speedster Option: Stock Profile-Single Module

Speedster Option: Stock Profile-Single Module

size (mm)

product code

quantity

Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit

10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260 6.5 x 260 8.0 x 160 10.0 x 160 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160

R11010210 R11012210 R11014210 R11016210 R1106260 R11065260 R1108160 R11010160 R1106210 R11065210 R1107210 R1108210 R1104160 R1105160 R11055160 R1106160 R11065160 R1107160

4 3 2 2 3 3 6 4 3 3 3 6 4 6 10 10 5 10

Top

type

Middle

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

Module 2 Top Row

Bottom

Bottom

Middle

Top

Module 1 Top Row 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type

size (mm)

product code

quantity

Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Speedster SDS-Plus Drill Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit

8.0 x 260 10.0 x 450 12.0 x 450 16.0 x 450 20.0 x 450 25.0 x 450 8.0 x 150 10.0 x 150 12.0 x 150 14.0 x 150 8.0 x 200 10.0 x 200 4.0 x 150 5.0 x 150 5.5 x 150 6.0 x 150 6.5 x 150 7.0 x 150

R1108260 R11010460 R11012460 R11016460 R11020460 R11025460 PP80150 PP10150 PP12150 PP14150 PP80200 PP10200 PP40150 PP50150 PP55150 PP60150 PP65150 PP70150

3 2 2 2 1 2 5 5 3 3 5 5 3 4 10 10 4 10

OR PowerBohr Option: Stock Profile-Single Module

PowerBohr Option: Stock Profile-Single Module

product code

quantity

PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit

10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260 6.5 x 260 8.0 x 160 10.0 x 160 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160

S10210 S12210 S14210 S16210 S6260 S65260 S8160 S10160 S6210 S65210 S7210 S8210 S4160 S5160 S55160 S6160 S65160 S7160

4 3 2 2 3 3 6 4 3 3 3 6 4 6 10 10 5 10

Stock Profile-Single Module

Top

type 1 2 3 4 1 2 3 4 1 2 3

118

Sabre Blades-Green Wood Sabre Blades-Wood/Metal Jigsaw Blades-Metal Jigsaw Blades-Laminate Flooring Sabre Blades-Wood Sabre Blades-Metal Jigsaw Blades-Wood Jigsaw Blades-Wood, Curve Cut Jigsaw Blades-Wood Jigsaw Blades-Wood, Fine Cut Jigsaw Blades-Wood, Rev.Cut

T: 0161 483 5557

product code

bosch code

quantity

121611 121613 XMG11 HC19RBi 121600 144245 240520 240502 202436 240515 240545

S1531L S1122VF T118A -- S644D S922BF T144D T101AO T234X T101B T101BR

5 3 3 5 3 3 10 5 10 10 10

reisser.co.uk

Top

size (mm)

Middle

type

Bottom

Top Middle Bottom

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

Module 2 Top Row

PLUS Module 3 Top Row

Bottom Middle

MERCHANDISING

Depots

Module 1 Top Row 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type

size (mm)

product code

quantity

PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit PowerBohr SDS-Plus Drill Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit Prem Plus Masonry Bit

8.0 x 260 10.0 x 450 12.0 x 450 16.0 x 450 20.0 x 450 25.0 x 450 8.0 x 150 10.0 x 150 12.0 x 150 14.0 x 150 8.0 x 200 10.0 x 200 4.0 x 150 5.0 x 150 5.5 x 150 6.0 x 150 6.5 x 150 7.0 x 150

S8260 S10460 S12460 S16460 S20460 S25460 PP80150 PP10150 PP12150 PP14150 PP80200 PP10200 PP40150 PP50150 PP55150 PP60150 PP65150 PP70150

3 2 2 2 1 2 5 5 3 3 5 5 3 4 10 10 4 10

Order: 1m Mixed Depot (Speedster option) PTAMDS OR 1m Mixed Depot (PowerBohr option) PTAMDP

T: +353 579 333 314

reisser.ie


MIXED DEPOT DISPLAY UNIT

Stock Profile-Single Module

Stock Profile-Single Module

type AA1 Arbor (AS1) Boxed AA2 Arbor (AS2) Boxed Std. Pilot Drill (Wallet 1pc.) Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw Cobalt Bi-Metal Variable Pitch Holesaw

product code

quantity

14-30 32-210 75 20 25 32 35 38 44 51 57 60 64 70 89 102

118016 118017 202315H 118323 118326 118330 118331 118332 118335 118337 118339 118340 118341 118343 118345 118346

4 6 3 4 4 3 2 2 2 3 2 2 2 3 2 2

1 2 3 4 5 6

1

Module 2 Middle Row Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 1pc.) HSS-G Jobber Drill (Wallet 2pcs.) HSS-G Jobber Drill (Wallet 2pcs.) HSS-G Jobber Drill (Wallet 2pcs.) HSS-G Jobber Drill (Wallet 2pcs.) HSS-G Jobber Drill (Wallet 2pcs.) HSS-G Jobber Drill (Wallet 2pcs.)

size (mm)

size (mm)

product code

quantity

6.0 x 93 6.5 x 101 7.0 x 109 8.0 x 117 10.0 x 133 12.0 x 151 4.0 x 75 4.2 x 75 4.5 x 80 4.8 x 86 5.0 x 86 5.5 x 93 1.5 x 40 2.0 x 49 2.5 x 57 3.0 x 61 3.2 x 65 3.5 x 70

145789 145790 145792 145794 145798 145802 145778 145781 145782 145784 145785 145788 145757 145760 145762 145764 145773 145776

10 3 3 3 5 3 10 3 6 3 10 3 4 4 5 10 5 10

1 2 3 4 5 1 2 3 4 5 6 7

2 3 4 5

type

size (mm)

product code

qty

ZENTRO SDS-plus Drill Bit 6.0 x 160 11560160 4 ZENTRO SDS-plus Drill Bit 7.0 x 160 11570160 4 ZENTRO SDS-plus Drill Bit 8.0 x 160 11580160 4 ZENTRO SDS-plus Drill Bit 8.0 x 210 11580210 4 ZENTRO SDS-plus Drill Bit 10.0 x 160 11510160 4 ZENTRO SDS-plus Drill Bit 10.0 x 210 11510210 4 SDS-plus Shank Auger Bit 10 x 235 145291 1 (Tube & Hanger) SDS-plus Shank Auger Bit 12 x 235 145292 1 (Tube & Hanger) SDS-plus Shank Auger Bit 16 x 235 145294 1 (Tube & Hanger) SDS-plus Shank Auger Bit 20 x 235 145296 1 (Tube & Hanger) SDS-plus Shank Auger Bit 25 x 235 145000 1 (Hanging Tube) Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Hex Shank Auger Bit (Tube & Hanger) Hex Shank Auger Bit (Tube & Hanger) Hex Shank Auger Bit (Tube & Hanger) Hex Shank Auger Bit (Tube & Hanger) Hex Shank Auger Bit (Tube & Hanger)

8.0 x 152 10.0 x 152 12.0 x 152 16.0 x 152 20.0 x 152 25.0 x 152 32.0 x 152

202215 202216 202217 202220 202222 202225 202229

3 5 5 10 10 10 5

10 x 235

124067

2

12 x 235

124068

2

16 x 235

124070

2

20 x 235

124072

2

25 x 235

207717

2

Display Unit

Module 3 Middle Row

1

2

3

1

2

3

Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS-G Reduced Shank Blacksmith’s Drill (Tube 1pc.) HSS Fully Ground Long Series Drill (Wallet 2pcs.) HSS Fully Ground Long Series Drill (Wallet 2pcs.) HSS Fully Ground Long Series Drill (Wallet 1pc.) HSS Fully Ground Long Series Drill (Wallet 1pc.) HSS Fully Ground Long Series Drill (Wallet 1pc.) HSS Fully Ground Long Series Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.) HSS Fully Ground Cobalt Jobber Drill (Wallet 1pc.)

T: 0161 483 5557

size (mm)

product code

quantity

14.0 x 160 15.0 x 169 16.0 x 178 18.0 x 191 20.0 x 205 22.0 x 230 3.0 x 100 3.5 x 112 4.0 x 119 4.5 x 126 5.0 x 132 6.0 x 139 3.0 x 61 3.5 x 70 4.0 x 75 4.5 x 80 5.0 x 86 6.0 x 93

240886 240888 240890 240894 240898 240899 145131 145133 145134 145136 145138 145140 145157 145161 145162 145165 145167 145171

2 1 2 2 2 1 5 5 10 5 5 5 5 5 5 5 5 5

reisser.co.uk

T: +353 579 333 314

reisser.ie

Depots

1-2 3-5 6 1 2 3 4 5 6 1 2 3 4 1 2 3

Lower Rail

MERCHANDISING

Bottom Shelf 3

Shelf 2

Top

Module 1 Middle Row

119


EXTENSION PANEL MIXED PTA SELECTION FOR DISPLAY UNITS

Stock Layout 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 1 2 3

1 2 3

4

5

6

7 8 1 2 3 4 5 6

1

2

3

Extension Panel Stock Profile-Extension Panel

Right

Bottom Row

Left

MERCHANDISING

Right

Depots

Top Row

Left

1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 1 2 3 1 2 3 4 5 6 7 8 1 2 3 4 5 6 1 2 3

type/ size (mm) Speedster SDS-Plus Hammer Drill Bit 5.5 x 160 Speedster SDS-Plus Hammer Drill Bit 6.0 x 160 Speedster SDS-Plus Hammer Drill Bit 7.0 x 160 Speedster SDS-Plus Hammer Drill Bit 6.0 x 210 Speedster SDS-Plus Hammer Drill Bit 8.0 x 210 Speedster SDS-Plus Hammer Drill Bit 10.0 x 210 Prem Plus Masonry Drill Bit 5.5 x 150 Prem Plus Masonry Drill Bit 6.0 x 150 Prem Plus Masonry Drill Bit 7.0 x 150 Prem Plus Masonry Drill Bit 8.0 x 200 Prem Plus Masonry Drill Bit 10.0 x 200 Flat Wood Bit 16 x 150 Flat Wood Bit 20 x 150 Flat Wood Bit 25 x 150 Hex Shank Auger Bit 16.0 x 235 Hex Shank Auger Bit 20.0 x 235 Hex Shank Auger Bit 25.0 x 235 (S644D) Sabre blades for wood, soft plastic and gypsum board (S1531l) Sabre blades for green wood (S1122vf) Sabre blades for metal and wood with nails Cobalt Bi-Metal Holesaw (Boxed) 20 Cobalt Bi-Metal Holesaw (Boxed) 25 Cobalt Bi-Metal Holesaw (Boxed) 38 Cobalt Bi-Metal Holesaw (Boxed) 44 Cobalt Bi-Metal Holesaw (Boxed) 51 Cobalt Bi-Metal Holesaw (Boxed) 60 Holesaw Arbor (Boxed) (14-30,11mm Hex) As1 Holesaw Arbor (Boxed) (32-210,11mm Hex) As2 HSS Ground Din338 Jobber Drill (Wallet 2pcs) 3.0 HSS Ground Din338 Jobber Drill (Wallet 1pc) 4.0 HSS Ground Din338 Jobber Drill (Wallet 1pc) 5.0 HSS Ground Din338 Jobber Drill (Wallet 1pc) 6.0 HSS Ground Din338 Jobber Drill (Wallet 1pc) 8.0 HSS Ground Din338 Jobber Drill (Wallet 1pc) 10.0 (T101B) Jigsaw blades for wood & plastic (T101BR) Reverse cut jigsaw blades for wood & plastic (T118A) Bi-Metal jigsaw blades for sheet steel

product code

quantity

R11055160 R1106160 R1107160 R1106210 R1108210 R11010210 PP55150 PP60150 PP70150 PP80200 PP10200 202220 202222 202225 124070 124072 207717 121600 121611 121613 118323 118326 118332 118335 118337 118340 118016 118017 145764 145778 145785 145789 145794 145798 240515 240545 XMG11

10 10 10 10 8 6 10 10 10 8 6 10 10 10 2 2 2 5 5 5 3 3 2 2 2 2 3 3 10 10 10 10 5 5 10 10 5

Order:: 1m Mixed PTA Extension Panel (Speedster option) PTAMEPS OR 1m Mixed PTA Extension Panel (PowerBohr option) PTAMEPP

120

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


ZENTRO max

Stock Layout

325mm Module Selection

Premium quality SDS-max hammer drill for use in reinforced concrete, stone and

Stock Profile-Single Module

masonry.

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

size (mm)

325mm Module

product code

quantity

18.0 20.0 22.0 24.0 25.0 32.0

x x x x x x

540 520 520 520 520 570

139663 139665 139668 139671 139673 139681

1 1 1 1 1 1

25.0 28.0 30.0 32.0 35.0 14.0

x x x x x x

320 370 370 370 370 540

139672 139675 139678 139680 139683 139657

1 1 1 1 1 1

12.0 14.0 16.0 18.0 20.0 24.0

x x x x x x

340 340 340 340 320 320

139653 139656 139660 139662 139664 139670

1 1 1 1 1 1

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

475mm Module Selection

Stock Layout

Masonry

Order: Zentro SDS-max 325mm Module ZMAX325

Bottom

Middle

T: 0161 483 5557

reisser.co.uk

475mm Module

size (mm)

product code

quantity

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

22.0 x 520 24.0 x 520 25.0 x 520 28.0 x 570 32.0 x 570 Bull Point 400 Chisel 400 Spade Chisel 50 x 360 Spade Chisel 80 x 300 30.0 x 370 32.0 x 370 35.0 x 370 38.0 x 370 12.0 x 540 14.0 x 540 16.0 x 540 18.0 x 540 20.0 x 520 12.0 x 340 14.0 x 340 16.0 x 340 18.0 x 340 20.0 x 320 22.0 x 320 24.0 x 320 25.0 x 320 28.0 x 370

139668 139671 139673 139676 139681 139729 139732 139735 139736 139678 139680 139683 139686 139654 139657 139661 139663 139665 139653 139656 139660 139662 139664 139667 139670 139672 139675

1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

T: +353 579 333 314

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: Zentro SDS-max 475mm Module ZMAX475

reisser.ie

121

MERCHANDISING

Top

Stock Profile-Single Module with chisels


ZENTRO plus

Stock Layout

325mm Module Selection

Super premium quality, four cutter SDS-plus hammer drill for use in

Stock Profile-Single Module

reinforced concrete and other tough applications.

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

6.5 x 260 10.0 x 260 12.0 x 260 14.0 x 310 10.0 x 450 12.0 x 450

11565260 11510260 11512260 11514310 11510450 11512450

2 2 2 2 2 2

8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260

11580210 11510210 11512210 11514210 11516210 11560260

3 3 2 2 2 2

5.5 x 160 6.0 x 160 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160

11555160 11560160 11570160 11580160 11510160 11512160

3 3 3 3 3 3

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Masonry

Order: Zentro SDS-plus 325mm Module ZPLUS325

Stock Layout

475mm Module Selection Stock Profile-Single Module

Bottom

Middle

Top

MERCHANDISING

122

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

12.0 x 260 16.0 x 260 6.0 x 310 10.0 x 310 12.0 x 310 14.0 x 310 10.0 x 450 12.0 x 450 14.0 x 450 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260 6.5 x 260 8.0 x 260 10.0 x 260 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160 6.0 x 210 6.5 x 210

11512260 11516260 11560310 11510310 11512310 11514310 11510450 11512450 11514450 11580210 11510210 11512210 11514210 11516210 11560260 11565260 11580260 11510260 11555160 11560160 11565160 11570160 11580160 11510160 11512160 11560210 11565210

2 2 2 2 2 2 2 2 2 3 3 2 2 2 2 2 2 2 3 3 2 3 3 3 3 3 2

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

T: +353 579 333 314

Order: Zentro SDS-plus 475mm Module ZPLUS475

reisser.ie


SPEEDSTER

ÂŽ

WITH SDS-plus SHANK

Stock Layout

325mm Module Selection Stock Profile-Single Module

Bottom

Middle

Top

Premium quality SDS-plus hammer drill for use in concrete, stone and masonry.

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260 8.0 x 260

R11010210 R11012210 R11014210 R11016210 R1106260 R1108260

5 3 3 2 3 2

8.0 x 160 10.0 x 160 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210

R1108160 R11010160 R1106210 R11065210 R1107210 R1108210

10 6 4 3 2 6

4.0 5.0 5.5 6.0 6.5 7.0

R1104160 R1105160 R11055160 R1106160 R11065160 R1107160

5 6 10 10 4 10

x x x x x x

160 160 160 160 160 160

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

475mm Module Selection - V2

Stock Profile-Single Module

Stock Profile-Single Module with chisels quantity

6.0 x 260 6.5 x 260 8.0 x 260 8.0 x 310 10.0 x 310 12.0 x 310 10.0 x 450 12.0 x 450 16.0 x 450 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 20.0 x 200 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 5.5 x 210

R1106260 R11065260 R1108260 R1108310 R11010310 R11012310 R11010460 R11012460 R11016460 R1106210 R11065210 R1107210 R1108210 R11010210 R11012210 R11014210 R11016210 R11020210 R1104160 R1105160 R11055160 R1106160 R11065160 R1107160 R1108160 R11010160 R11055210

3 2 2 2 2 2 2 2 2 4 3 2 6 5 3 3 2 2 5 6 10 10 4 10 10 6 2

T: 0161 483 5557

Top

product code

Middle

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

Bottom

Bottom

Middle

Top

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

product code

quantity

6.0 x 260 6.5 x 260 8.0 x 260 10.0 x 450 12.0 x 450 16.0 x 450 Bull Point 250 Chisel 20 x 250 Spade Chisel 40 x 200 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 20.0 x 200 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 5.5 x 210

R1106260 R11065260 R1108260 R11010460 R11012460 R11016460 137051 137052 137054 R1106210 R11065210 R1107210 R1108210 R11010210 R11012210 R11014210 R11016210 R11020210 R1104160 R1105160 R11055160 R1106160 R11065160 R1107160 R1108160 R11010160 R11055210

3 2 2 2 2 2 2 2 2 4 3 2 6 5 3 3 2 2 5 6 10 10 4 10 10 6 2

Stock Layout 475mm Module 1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: Speedster SDS-plus 475mm Module SPEED475V1 OR Speedster SDS-plus 475mm Module c/w Chisels SPEED475V2

T: +353 579 333 314

reisser.ie

123

MERCHANDISING

475mm Module Selection - V1

Masonry

Order: Speedster SDS-plus 325mm Module SPEED325


SPEEDSTER V-PLUS HAMMER DRILL BITS

Stock Layout

2 x 475mm Module Selection - V1 Stock Profile-Left Module

R1108310 R11010310 R11012310 R11014310 R11016310 R11018310 R11020310 R1106460 R1108460 R11065210 R1107210 R1108210 R11010210 R11012210 R11014210 R11016210 R11018210 R11020210 R1105110 R11055110 R1106110 R11065110 R1107110 R1104160 R1105160 R11055160 R1106160

2 2 2 2 2 1 2 2 2 3 2 6 5 3 3 2 1 2 2 4 4 2 4 5 6 10 10

Top

quantity

8.0 x 310 10.0 x 310 12.0 x 310 14.0 x 310 16.0 x 310 18.0 x 300 20.0 x 300 6.0 x 460 8.0 x 460 6.5 x 210 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 18.0 x 200 20.0 x 200 5.0 x 110 5.5 x 110 6.0 x 110 6.5 x 110 7.0 x 110 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160

Middle

product code

Bottom

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

Masonry

Bottom

Middle

Top

Stock Profile-Right Module product code

quantity

10.0 x 450 12.0 x 450 14.0 x 450 16.0 x 450 18.0 x 450 20.0 x 450 22.0 x 450 24.0 x 450 25.0 x 450 5.5 x 260 6.0 x 260 6.5 x 260 8.0 x 260 10.0 x 260 12.0 x 260 18.0 x 250 6.0 x 310 6.5 x 310 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160 14.0 x 160 16.0 x 160 5.5 x 210 6.0 x 210

R11010460 R11012460 R11014460 R11016460 R11018460 R11020460 R11022460 R11024460 R11025460 R11055260 R1106260 R11065260 R1108260 R11010260 R11012260 R11018260 R1106310 R11065310 R11065160 R1107160 R1108160 R11010160 R11012160 R11014160 R11016160 R11055210 R1106210

2 2 2 2 1 2 2 1 2 2 3 2 2 2 2 1 2 2 4 10 10 6 3 2 2 2 4

Stock Profile-Right Module with chisels

124

quantity

12.0 x 310 14.0 x 310 16.0 x 310 20.0 x 300 8.0 x 460 10.0 x 450 12.0 x 450 14.0 x 450 16.0 x 450 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 18.0 x 200 20.0 x 200 6.0 x 260 5.0 x 110 5.5 x 110 6.0 x 110 7.0 x 110 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160

R11012310 R11014310 R11016310 R11020310 R1108460 R11010460 R11012460 R11014460 R11016460 R1107210 R1108210 R11010210 R11012210 R11014210 R11016210 R11018210 R11020210 R1106260 R1105110 R11055110 R1106110 R1107110 R1104160 R1105160 R11055160 R1106160 R11065160

2 2 2 2 2 2 2 2 2 2 6 5 3 3 2 1 2 3 2 4 4 4 5 6 10 10 4

T: 0161 483 5557

Top

product code

Middle

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

Bottom

Bottom

Middle

Top

reisser.co.uk

10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18

475mm Module

475mm Module

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Order: Speedster SDS-plus 475mm Double Module 2XSPEED475V1

Stock Layout

2 x 475mm Module475mm Selection Module - V2 Selection - V2 Stock Profile-Left Module

MERCHANDISING

10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18

size (mm)

size (mm)

product code

quantity

18.0 x 450 20.0 x 450 22.0 x 450 24.0 x 450 25.0 x 450 Bull Point 250 20 x 250 Spade Chisel 40 x 200 Angled Tile Chisel 40 x 200 6.5 x 260 8.0 x 260 10.0 x 260 12.0 x 260 18.0 x 250 6.0 x 310 6.5 x 310 8.0 x 310 10.0 x 310 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160 14.0 x 160 16.0 x 160 5.5 x 210 6.0 x 210 6.5 x 210

R11018460 R11020460 R11022460 R11024460 R11025460 137051 137052 137054 145287 R11065260 R1108260 R11010260 R11012260 R11018260 R1106310 R11065310 R1108310 R11010310 R1107160 R1108160 R11010160 R11012160 R11014160 R11016160 R11055210 R1106210 R11065210

1 2 2 1 2 2 2 2 2 2 2 2 2 1 2 2 2 2 10 10 6 3 2 2 2 4 3

T: +353 579 333 314

475mm Module

475mm Module

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Order: Speedster SDS-plus 475mm Double Module c/w Chisels 2XSPEED475V2

reisser.ie


PowerBohr WITH SDS-plus SHANK

Stock Layout

325mm Module Selection Stock Profile-Single Module

Standard duty SDS-plus hammer drill for use in concrete, stone and masonry.

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 6.0 x 260 8.0 x 260

S10210 S12210 S14210 S16210 S6260 S8260

5 3 3 2 3 2

8.0 x 160 10.0 x 160 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210

S8160 S10160 S6210 S65210 S7210 S8210

10 6 4 3 2 6

4.0 5.0 5.5 6.0 6.5 7.0

S4160 S5160 S55160 S6160 S65160 S7160

5 6 10 10 4 10

x x x x x x

160 160 160 160 160 160

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

475mm Module Selection - V2

Stock Profile-Single Module

Stock Profile-Single Module with chisels quantity

6.0 x 260 6.5 x 260 8.0 x 260 8.0 x 310 10.0 x 310 12.0 x 310 10.0 x 450 12.0 x 450 16.0 x 450 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 20.0 x 210 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 5.5 x 210

S6260 S65260 S8260 S8310 S10310 S12310 S10450 S12450 S16450 S6210 S65210 S7210 S8210 S10210 S12210 S14210 S16210 S20210 S4160 S5160 S55160 S6160 S65160 S7160 S8160 S10160 S55210

3 2 2 2 2 2 2 2 2 4 3 2 6 5 3 3 2 2 5 6 10 10 4 10 10 6 2

T: 0161 483 5557

Top

product code

Middle

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

Bottom

Bottom

Middle

Top

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

reisser.co.uk

size (mm) 6.0 x 260 6.5 x 260 8.0 x 260 10.0 x 450 12.0 x 450 16.0 x 450 Bull Point 250 Chisel 20 x 250 Chisel 40 x 200 6.0 x 210 6.5 x 210 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 20.0 x 210 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160 7.0 x 160 8.0 x 160 10.0 x 160 5.5 x 210

Stock Layout 475mm Module

product code

quantity

S6260 S65260 S8260 S10450 S12450 S16450 SBP250 SC250 SSC250 S6210 S65210 S7210 S8210 S10210 S12210 S14210 S16210 S20210 S4160 S5160 S55160 S6160 S65160 S7160 S8160 S10160 S55210

3 2 2 2 2 2 2 2 2 4 3 2 6 5 3 3 2 2 5 6 10 10 4 10 10 6 2

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: PowerBohr SDS-plus 475mm Module POWER475V1 OR PowerBohr SDS-plus 475mm Module c/w Chisels POWER475V2

T: +353 579 333 314

reisser.ie

125

MERCHANDISING

475mm Module Selection - V1

Masonry

Order: PowerBohr SDS-plus 325mm Module POWER325


POWERBOHR

HAMMER DRILL BITS Stock Layout

2 x 475mm Module Selection - V1 Stock Profile-Left Module

S6310 S8310 S10310 S12310 S14310 S16310 S18310 S20310 S8450 S7210 S8210 S10210 S12210 S14210 S16210 S18210 S20210 S6260 S5110 S55110 S6110 S7110 S4160 S5160 S55160 S6160 S65160

2 2 2 2 2 2 1 2 2 2 6 5 3 3 2 1 2 3 2 4 4 4 5 6 10 10 4

Top

quantity

6.0 x 310 8.0 x 310 10.0 x 310 12.0 x 310 14.0 x 310 16.0 x 310 18.0 x 310 20.0 x 310 8.0 x 450 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 18.0 x 210 20.0 x 210 6.0 x 260 5.0 x 110 5.5 x 110 6.0 x 110 7.0 x 110 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160

Middle

product code

Bottom

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

size (mm)

Masonry

Bottom

Middle

Top

Stock Profile-Right Module product code

quantity

10.0 x 450 12.0 x 450 14.0 x 450 16.0 x 450 18.0 x 450 20.0 x 450 22.0 x 450 24.0 x 450 25.0 x 450 6.5 x 260 8.0 x 260 10.0 x 260 12.0 x 260 14.0 x 260 16.0 x 260 18.0 x 260 22.0 x 260 25.0 x 260 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160 14.0 x 160 16.0 x 160 5.5 x 210 6.0 x 210 6.5 x 210

S10450 S12450 S14450 S16450 S18450 S20450 S22450 S24450 S25450 S65260 S8260 S10260 S12260 S14260 S16260 S18260 S22260 S25260 S7160 S8160 S10160 S12160 S14160 S16160 S55210 S6210 S65210

2 2 2 2 1 2 2 1 2 2 2 2 2 2 2 1 2 2 10 10 6 3 2 2 2 4 3

475mm Module

475mm Module

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Order: PowerBohr SDS-plus 475mm Double Module 2XPOWER475V1

Stock Layout

2 x 475mm Module Selection - V2 Stock Profile-Left Module product code

quantity

12.0 x 310 14.0 x 310 16.0 x 310 20.0 x 310 8.0 x 450 10.0 x 450 12.0 x 450 14.0 x 450 16.0 x 450 7.0 x 210 8.0 x 210 10.0 x 210 12.0 x 210 14.0 x 210 16.0 x 210 18.0 x 210 20.0 x 210 6.0 x 260 5.0 x 110 5.5 x 110 6.0 x 110 7.0 x 110 4.0 x 160 5.0 x 160 5.5 x 160 6.0 x 160 6.5 x 160

S12310 S14310 S16310 S20310 S8450 S10450 S12450 S14450 S16450 S7210 S8210 S10210 S12210 S14210 S16210 S18210 S20210 S6260 S5110 S55110 S6110 S7110 S4160 S5160 S55160 S6160 S65160

2 2 2 2 2 2 2 2 2 2 6 5 3 3 2 1 2 3 2 4 4 4 5 6 10 10 4

* At time of publishing T: 0161 483 5557

126

Top

size (mm)

Middle

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

Stock Profile-Right Module with chisels

Bottom

Middle

Top

Bottom

MERCHANDISING

10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18

size (mm)

10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18

reisser.co.uk

size (mm)

product code

quantity

18.0 x 450 20.0 x 450 22.0 x 450 24.0 x 450 25.0 x 450 Bull Point 250 Chisel 20 x 250 Spade Chisel 40 x 200 Angled Tile Chisel 40 x 200 6.5 x 260 8.0 x 260 10.0 x 260 12.0 x 260 16.0 x 260 25.0 x 260 6.0 x 310 8.0 x 310 10.0 x 310 7.0 x 160 8.0 x 160 10.0 x 160 12.0 x 160 14.0 x 160 16.0 x 160 5.5 x 210 6.0 x 210 6.5 x 210

S18450 S20450 S22450 S24450 S25450 137051 137052 137054 145287 S65260 S8260 S10260 S12260 S16260 S25260 S6310 S8310 S10310 S7160 S8160 S10160 S12160 S14160 S16160 S55210 S6210 S65210

1 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 10 10 6 3 2 2 2 4 3

475mm Module

475mm Module

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

Order: PowerBohr SDS-plus 475mm Double Module c/w Chisels 2XPOWER475V2

T: +353 579 333 314

reisser.ie


PREM-PLUS WITH STRAIGHT SHANK

Stock Layout

325mm Module Selection Stock Profile-Single Module

Premium quality straight shank drill for use in concrete, stone and masonry.

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

12.0 x 150 14.0 x 150 8.0 x 200 10.0 x 200 10.0 x 400 12.0 x 400

PP12150 PP14150 PP80200 PP10200 PP10400 PP12400

4 2 5 5 3 3

5.5 x 150 6.0 x 150 6.5 x 150 7.0 x 150 8.0 x 150 10.0 x 150

PP55150 PP60150 PP65150 PP70150 PP80150 PP10150

10 10 5 10 5 5

5.0 5.5 6.0 7.0 4.0 5.0

PP5090 PP5590 PP60100 PP70100 PP40150 PP50150

5 5 5 5 5 5

x x x x x x

90 90 100 100 150 150

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Masonry

Order: Prem Plus SDS-plus 325mm Module PREM325

Stock Layout

475mm Module Selection

Bottom

Middle

Top

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

8.0 x 200 10.0 x 200 12.0 x 200 14.0 x 200 20.0 x 200 8.0 x 400 10.0 x 400 12.0 x 400 16.0 x 400 6.0 x 150 6.5 x 150 7.0 x 150 8.0 x 150 10.0 x 150 12.0 x 150 14.0 x 150 16.0 x 150 6.0 x 200 4.0 x 85 5.0 x 90 5.5 x 90 6.0 x 100 6.5 x 100 7.0 x 100 4.0 x 150 5.0 x 150 5.5 x 150

PP80200 PP10200 PP12200 PP14200 PP20200 PP80400 PP10400 PP12400 PP16400 PP60150 PP65150 PP70150 PP80150 PP10150 PP12150 PP14150 PP16150 PP60200 PP4085 PP5090 PP5590 PP60100 PP65100 PP70100 PP40150 PP50150 PP55150

5 5 3 2 2 2 2 2 2 10 5 10 5 5 4 2 2 3 2 2 4 4 2 4 3 3 10

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: Prem Plus SDS-plus 475mm Module PREM475

T: +353 579 333 314

reisser.ie

127

MERCHANDISING

Stock Profile-Single Module


KOMBI TCT MULTIPURPOSE DRILLS

325mm Module Selection

WITH STRAIGHT SHANK

Stock Layout

Stock Profile-Single Module

Bottom

Middle

Top

size(mm) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

10.0 x 150 12.0 x 150 6.0 x 200 8.0 x 200 10.0 x 200 12.0 x 200 5.0 x 150 5.5 x 150 6.0 x 150 6.5 x 150 7.0 x 150 8.0 x 150 5.0 x 90 5.5 x 90 6.0 x 100 6.5 x 100 7.0 x 100 4.0 x 150

325mm Module

product code

quantity

K10150 K12150 K60200 K10200 K10400 K12400 K50150 K55150 K60150 K65150 K70150 K80150 K5095 K5595 K60100 K65100 K70100 K40150

5 4 5 5 3 3 5 10 10 5 10 5 5 5 5 5 5 5

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

TILE DRILLS FOR CERAMIC OR PORCELAIN TILES AND GLASS

325mm Module Selection

Stock Layout

Stock Profile-Single Module

Middle

Top

Bottom

MERCHANDISING

Kombi & Tile Drills

Order: KOMBI 325 Module KOMBI325

type/ size(mm)

product code qty

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4

Spear Tip TCT Tile & Glass Drill 4.0 x 60 SPD4 4 Spear Tip TCT Tile & Glass Drill 5.0 x 70 SPD5 5 Spear Tip TCT Tile & Glass Drill 6.0 x 75 SPD6 5 Spear Tip TCT Tile & Glass Drill 7.0 x 80 SPD7 5 Spear Tip TCT Tile & Glass Drill 8.0 x 80 SPD8 3 Spear Tip TCT Tile & Glass Drill 10.0 x 100 SPD10 2 Premium TCT Tile & Glass Drill 4.0 x 51 PTD4 4 Premium TCT Tile & Glass Drill 5.0 x 51 PTD5 5 Premium TCT Tile & Glass Drill 6.0 x 57 PTD6 5 Premium TCT Tile & Glass Drill 7.0 x 57 PTD7 5 Premium TCT Tile & Glass Drill 8.0 x 57 PTD8 3 Premium TCT Tile & Glass Drill 10.0 x 95 PTD10 2 Diamond Tile Drill 5.0 x 67 TDD5 4 Diamond Tile Drill 6.0 x 67 TDD6 4 Diamond Tile Drill 7.0 x 67 TDD7 4 Diamond Tile Drill 8.0 x 80 TDD8 3 Pilot Drill for 20/25mm Diamond Drills 5 6.0 x 90 TDDPILOT 2 TDD10 2 6 Diamond Tile Drill 10.0 x 80 TDD12 2 7 Diamond Tile Drill 12.0 x 80 TDD16 2 8 Diamond Tile Drill 16.0 x 80 TDD20 1 9 Diamond Tile Drill 20.0 x 80 TDD25 1 10 Diamond Tile Drill 25.0 x 80

325mm Module 1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6 7 8 10 5 6 7 8 9

Order: Tile Drill 325 Module TILE325

128

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


Stock Profile-Bulk Dispenser

product code

quantity

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

124390 124391 124392 124393 124394 124398 124399 124402

10 10 20 20 30 20 30 30

5.0 5.5 6.0 6.5 7.0

124403 124406 124407 124408 124410

20 10 20 10 10

7.5 8.0 8.5 9.0

124411 124412 124413 124414

10 10 10 10

9.5 10.0 10.5 11.0

124415 124416 124418 124419

10 10 5 5

11.5 12.0 12.5 13.0

124420 124421 124422 124423

5 5 5 5

Top

size (mm)

Row 2

1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4

reisser.co.uk

10 10 20 20 30 20 30 30

5.0 5.5 6.0 6.5 7.0

TIN5 TIN55 TIN6 TIN65 TIN7

20 10 20 10 10

7.5 8.0 8.5 9.0

TIN75 TIN8 TIN85 TIN9

10 10 10 10

9.5 10.0 10.5 11.0

TIN95 TIN100 TIN105 TIN110

10 10 5 5

11.5 12.0 12.5 13.0

TIN115 TIN120 TIN125 TIN130

5 5 5 5

HSS Roll Forged

Stock Profile-Bulk Dispenser

Stock Profile-Bulk Dispenser

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

145811 145816 145821 145826 145831 145837 145843 145848

10 10 20 20 30 20 30 30

5.0 5.5 6.0 6.5 7.0

145853 145858 145863 145868 145873

20 10 20 10 10

7.5 8.0 8.5 9.0

145878 145883 145888 145893

10 10 10 10

9.5 10.0 10.5 11.0

145898 145903 145907 145908

10 10 5 5

11.5 12.0 12.5 13.0

145909 145910 145911 145912

5 5 5 5

Top

quantity

Row 2

product code

Row 3

size (mm)

Order: BULKGROUND

T: 0161 483 5557

TIN1 TIN15 TIN2 TIN25 TIN3 TIN35 TIN4 TIN45

HSS Fully Ground

Row 4

1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4

quantity

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

Order: BULKTIN

Bottom

Bottom

Row 4

Row 3

Row 2

Top

product code

1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4

size (mm)

product code

quantity

1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

241067 241068 241069 241070 241071 241074 241075 241078

10 10 20 20 30 20 30 30

5.0 5.5 6.0 6.5 7.0

241079 241082 241083 241084 241085

20 10 20 10 10

7.5 8.0 8.5 9.0

241086 241087 241088 241089

10 10 10 10

9.5 10.0 10.5 11.0

241090 241091 241092 241093

10 10 5 5

11.5 12.0 12.5 13.0

241094 241095 241096 241097

5 5 5 5

Order: BULKROLLED

T: +353 579 333 314

reisser.ie

129

HSS

Order: BULKCOBALT

size (mm)

MERCHANDISING

1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4 1 2 3 4 1 2 3 4

Stock Profile-Bulk Dispenser

Row 3

Top Bottom

Row 4

Row 3

1.0mm-13.0mm sizes displayed in a lockable dispenser for counter top display.

Row 2

BULK COUNTER DISPLAY UNIT

HSS Ti-N Coated

Row 4

JOBBER DRILLS

HSS M35 Cobalt

Bottom

HSS DIN338


HIGH SPEED STEEL DIN338

Optimised tip angle for long life in metal â&#x20AC;&#x201C; particularly when drilling alloy and

Stock Profile-Single Module

Top

Bottom

stainless steels.

Stock Layout

325mm Module Selection

Middle

JOBBER DRILLS FULLY GROUND M35 COBALT

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

6.0 6.5 7.0 8.0 10.0 12.0

145171 145172 145174 145176 145180 145185

10 5 5 5 5 5

4.0 4.2 4.5 4.8 5.0 5.5

145162 145164 145165 145300 145167 145170

15 5 15 5 15 10

1.5 2.0 2.5 3.0 3.2 3.5

145154 145155 145156 145157 145159 145161

5 10 10 15 5 15

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

HSS

Order: Cobalt HSS 325 Module COBALT325

Stock Layout

475mm Module Selection

MERCHANDISING

Stock Profile-Single Module

Bottom

Middle

Top

130

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5

145178 145179 145180 145182 145183 145184 145185 145186 145187 145300 145167 145170 145171 145172 145174 145175 145176 145177 145154 145155 145156 145157 145159 145161 145162 145164 145165

2 2 5 2 2 2 4 2 3 5 15 10 15 10 5 2 5 2 5 10 10 15 10 15 15 5 15

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

T: +353 579 333 314

Order: Cobalt HSS 475 Module COBALT475

reisser.ie


HIGH SPEED STEEL DIN338

Optimised tip angle for long life in metal â&#x20AC;&#x201C; particularly when drilling alloy and

Stock Profile-Single Module

Top

Bottom

stainless steels.

Stock Layout

325mm Module Selection

Middle

JOBBER DRILLS FULLY GROUND TI-N COATED

size (mm)

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

product code

quantity

6.0 6.5 7.0 8.0 10.0 12.0

TIN6W TIN65W TIN7W TIN8W TIN100W TIN120W

10 5 5 5 5 5

4.0 4.2 4.5 4.8 5.0 5.5

TIN4W TIN42W TIN45W TIN48W TIN5W TIN55W

15 5 15 5 15 10

1.5 2.0 2.5 3.0 3.2 3.5

TIN15W TIN2W TIN25W TIN3W TIN32W TIN35W

5 10 10 15 5 15

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Order: Titanium HSS 325 Module TIN325

HSS

Stock Layout

475mm Module Selection

Bottom

Middle

Top

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5

TIN9W TIN95W TIN100W TIN105W TIN110W TIN115W TIN120W TIN125W TIN130W TIN48W TIN5W TIN55W TIN6W TIN65W TIN7W TIN75W TIN8W TIN85W TIN15W TIN2W TIN25W TIN3W TIN32W TIN35W TIN4W TIN42W TIN45W

2 2 5 2 2 2 4 2 3 5 15 10 15 10 5 2 5 2 5 10 10 15 10 15 15 5 15

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

T: +353 579 333 314

Order: Titanium HSS 475 Module TIN475

reisser.ie

131

MERCHANDISING

Stock Profile-Single Module


HIGH SPEED STEEL DIN338 JOBBER DRILLS FULLY GROUND

Stock Profile-Single Module

Top

Bottom

Middle

Standard duty HSS drill for steel, aluminium and non-ferrous metals.

Stock Layout

325mm Module Selection

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

6.0 6.5 7.0 8.0 10.0 12.0

145789 145790 145792 145794 145798 145802

10 5 5 5 5 5

4.0 4.2 4.5 4.8 5.0 5.5

145778 145781 145782 145784 145785 145788

20 5 15 5 15 15

1.5 2.0 2.5 3.0 3.2 3.5

145757 145760 145762 145764 145773 145776

5 15 15 20 5 20

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

HSS

Order: Ground HSS 325 Module GROUND325

Stock Layout

475mm Module Selection

MERCHANDISING

Stock Profile-Single Module

Bottom

Middle

Top

132

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 4.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 1.5 2.0 2.5 3.0 3.2 3.5 4.0 4.2 4.5

145796 145797 145798 145800 145801 145804 145802 145805 145803 145784 145785 145788 145789 145790 145792 145793 145794 145795 145757 145760 145762 145764 145773 145776 145778 145781 145782

2 2 5 2 2 2 5 2 3 5 15 10 15 5 5 2 5 2 5 10 10 15 5 15 15 5 15

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

T: +353 579 333 314

Order: Ground HSS 475 Module GROUND475

reisser.ie


BLACKSMITHâ&#x20AC;&#x2122;S DRILLS HSS REDUCED SHANK FULLY GROUND 325mm Module Selection

For drilling wood, plastics, non-ferrous metals, aluminium, cast iron and steel.

Stock Layout

Bottom

Middle

Top

Stock Profile-Single Module

325mm Module

size (mm)

product code

quantity

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

18.0 19.0 20.0 22.0 24.0 25.0

240894 240896 240898 240899 240900 240901

3 1 2 1 1 1

14.5 15.0 15.5 16.0 16.5 17.0

240887 240888 240889 240890 240891 240892

2 2 2 2 2 1

12.0 12.5 13.0 13.5 14.0 14.0

240882 240883 240884 240885 240886 240886

2 2 2 2 3 3

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Order: Blacksmiths 325 Module BSMITH325

Stock Layout

Middle Bottom

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

6.5 7.0 8.0 9.0 10.0 12.0

145141 145142 145144 145146 145148 145151

5 5 5 3 5 5

1 2 3 4 5 6

4.2 4.5 4.8 5.0 5.5 6.0

145135 145136 145137 145138 145139 145140

3 15 3 10 5 10

1 2 3 4 5 6

2.0 2.5 3.0 3.2 3.5 4.0

145129 145130 145131 145132 145133 145134

5 5 15 5 15 20

1 2 3 4 5 6

Order: HSS Long Series 325 Module LONG325

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

133

MERCHANDISING

Stock Profile-Single Module

Top

For use in steel, aluminium and plastic pipes and profiles.

325mm Module Selection

HSS

HSS DIN340 LONG SERIES DRILLS FULLY GROUND


COBALT BI-METAL HOLESAWS AND ACCESSORIES stainless and allow steels, aluminium and non-ferrous metals, wood and plastic.

Bottom Shelf 3

Shelf 2

Top

Stock Profile-Single Module

325mm Module

type/ size (mm)

product code

quantity

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4

arbor AS1 arbor AS1 arbor AS2 arbor AS2 arbor AS2 pilot drill

118016 118016 118017 118017 118017 202315H

2 2 2 2 2 3

20

118323

3

25 32 35 38 44

118326 118330 118331 118332 118335

3 2 2 2 2

51

118337

3

57 60 64

118339 118340 118341

2 2 2

1 2 3

70 89 102

118343 118345 118346

3 2 3

1 2 3 4 5 6

1 2 3 4 5 6 1 1

2

3

4

2

3

475mm Module Selection - V1

type/ size (mm)

product code

quantity

arbor AS1 arbor AS1 arbor AS2 arbor AS2 arbor AS3 arbor AS4 arbor AS11 arbor AS22 pilot drill 16 19 20 25 32 35 38 40 44 51 54 57 60 64 70 76 79 89 102

118016 118016 118017 118017 118018 118019 118020 118022 202315H 118321 118322 118323 118326 118330 118331 118332 118333 118335 118337 118338 118339 118340 118341 118343 118344 138226 118345 118346

2 2 2 2 1 1 1 1 3 2 2 4 4 2 2 2 2 2 3 2 2 2 2 3 2 2 2 3

134

T: 0161 483 5557

Stock Profile-Single Module

475mm Module

1 2 3 4 5 6 7 8 9

Top

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 2

3

4 Shelf 2

1

Shelf 3

Top Shelf 2 Shelf 3 Bottom

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 1 2 3 4

475mm Module Selection - V2

Stock Layout

Order: Large Holesaw Module V1 HS475V1

reisser.co.uk

Bottom

Saws & Holesaws

Order: Small Holesaw Module HS325

Stock Profile-Single Module

MERCHANDISING

Stock Layout

325mm Module Selection

Premium quality cobalt saws for driving

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 1 2 3 4 5 1 2 3 4

475mm Module

type/ size (mm)

product code

quantity

arbor AS1 arbor AS2 arbor AS3 arbor AS4 pilot drill 16 19 20 25 27 32 35 38 40 44 51 54 57 60 64 67 70 76 79 89 102

118016 118017 118018 118019 202315H 118321 118322 118323 118326 118327 118330 118331 118332 118333 118335 118337 118338 118339 118340 118341 118342 118343 118344 138226 118345 118346

2 2 1 1 3 2 2 4 4 2 2 2 2 2 2 3 2 2 2 2 2 3 2 2 2 3

T: +353 579 333 314

Stock Layout

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8

1 1

2

3 2

4 3

Order: Large Holesaw Module V2 HS475V2

reisser.ie

5 4


JIGSAW & SABRE SAW Stock Layout

Stock Profile-Single Module

325mm Module

1 2 3 4 1 2 3 4 1 2 3

product code 121611 121613 XMG11 HC19RBI 121600 144245 240520 240502 202436 240515 240545

bosch code

quantity

S1531L S1122VF T118A LAMINATOR S644D S922BF T144D T101AO T234X STAR T101B T101BR

2 2 5 3 2 2 10 2 5 10 10

Top Middle Bottom

121600 121611 3021225BI 144245 112042 121613 144246 XMG12 XMG31 240516 HC19RBI 240502 202436 240515 240545 240520 XMG11

quantity

S644D S1531L S1111DF S922BF S922EF S1122VF S1122BF T118B T318A T101D LAMINATOR T101AO T234X STAR T101B T101BR T144D T118A

2 2 2 2 2 2 2 4 3 3 3 2 5 10 10 10 5

S644D S1531L S1111DF S922VF S922BF S922EF S1122VF T101AO T244D T127DF T101DP LONG T118AF T234X STAR T101B T101BR T144D T118G

T: 0161 483 5557

quantity 2 2 2 2 2 2 2 2 2 2 2 5 5 10 10 10 3

Top

121600 121611 3021225BI 121612 144245 112042 121613 240502 240521 240507 XHC34D 240523 202436 240515 240545 240520 XMG107

bosch code

Middle

product code

1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5

reisser.co.uk

product code 144246 144243 3021150Bi 3021300Bi 111018 111024 3013250 240525 240527 XMG32 240541 240532 XMG11 XMG12 XMG31 240516 HC19RBI

3

4

1

2

3

1 2 3 4 5 6 7

1

2

3

4

5

1

2

3

4

5

Order: 475mm Jigsaw Blade Module JSB475

Stock Layout

Stock Profile-Right Module

Bottom

Top Middle Bottom

1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5

1 2

475mm Module

bosch code

2 x 475mm Module Selection Stock Profile-Left Module

4

Stock Layout

Stock Profile-Single Module product code

3

Order: 325mm Jigsaw Blade Module JSB325

475mm Module Selection

1 2 3 4 5 6 7 1 2 3 4 5 1 2 3 4 5

1 2

Saws & Holesaws

Bottom Middle

Top

High quality blades to fit most popular machines.

325mm Module Selection

bosch code

quantity

S1122BF S1122EF S611DF S1411DF S922HF S1122HF S1122BF LONG T118BF T318AF T318B T118AHM T130RIFF T118A T118B T318A T101D “LAMINATOR”

2 2 2 2 2 2 2 6 2 3 1 1 10 6 5 3 3

475mm Module

475mm Module

1 2 3 4 5 6 7

1 2 3 4 5 6 7

1 2 3 4 5

1 2 3 4 5

1 2 3 4 5

1 2 3 4 5

T: +353 579 333 314

Order: 475mm Jigsaw Blade Double Module 2XJSB475

reisser.ie

135

MERCHANDISING

BLADE PACKS


FLAT WOOD BITS AND BRAD POINT WOOD DRILLS

Stock Layout

325mm Module Selection Stock Profile-Single Module

Bottom

Middle

Top

High quality bits for use in soft and medium hardwoods and boards.

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type/ size (mm)

325mm Module

product code

quantity

Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Flat Wood Bit Extension

28.0 30.0 32.0 35.0 38.0

202227 202228 202229 202231 202233 202235

3 3 10 3 3 3

Flat Flat Flat Flat Flat Flat

Wood Wood Wood Wood Wood Wood

Bit Bit Bit Bit Bit Bit

16.0 18.0 19.0 20.0 22.0 25.0

202220 202221 124135 202222 202223 202225

15 5 3 15 5 15

Flat Flat Flat Flat Flat Flat

Wood Wood Wood Wood Wood Wood

Bit Bit Bit Bit Bit Bit

6.0 8.0 10.0 12.0 13.0 14.0

202214 202215 202216 202217 202218 202219

3 5 10 10 5 5

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Wood

Order: 325mm Flat Bit Module FLAT325

Stock Layout

475mm Module Selection

MERCHANDISING

Stock Profile-Single Module

Bottom

Middle

Top

136

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

type/ size (mm)

product code

quantity

Flat Wood Bit 20.0 Flat Wood Bit 22.0 Flat Wood Bit 25.0 Flat Wood Bit 28.0 Flat Wood Bit 30.0 Flat Wood Bit 32.0 Flat Wood Bit 35.0 Flat Wood Bit 38.0 Extension Flat Wood Bit 6.0 Flat Wood Bit 8.0 Flat Wood Bit 10.0 Flat Wood Bit 12.0 Flat Wood Bit 13.0 Flat Wood Bit 14.0 Flat Wood Bit 16.0 Flat Wood Bit 18.0 Flat Wood Bit 19.0 B/P Wood Bit 3.0 B/P Wood Bit 4.0 B/P Wood Bit 5.0 B/P Wood Bit 6.0 B/P Wood Bit 7.0 B/P Wood Bit 8.0 B/P Wood Bit 9.0 B/P Wood Bit 10.0 B/P Wood Bit 12.0

202222 202223 202225 202227 202228 202229 202231 202233 202235 202214 202215 202216 202217 202218 202219 202220 202221 124135 105810 105811 105812 105813 105814 105815 105816 105817 105819

15 3 15 2 2 10 2 2 2 2 4 5 5 3 5 15 3 3 3 6 6 6 5 5 2 4 2

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: 475mm Flat Bit Module FLAT475

T: +353 579 333 314

reisser.ie


AUGER BITS HEX SHANK For driving deep holes in soft and hardwoods.

Stock Layout

325mm Module Selection Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

size (mm)

product code

quantity

32.0 x 235 8.0 x 460 10.0 x 460 12.0 x 460 20.0 x 460 25.0 x 460

124078 124080 124081 124082 124086 207718

2 1 1 1 1 1

18.0 20.0 22.0 24.0 25.0 26.0

235 235 235 235 235 235

124071 124072 124073 124074 207717 124075

1 2 2 1 2 1

6.0 x 235 8.0 x 235 10.0 x 235 12.0 x 235 13.0 x 235 16.0 x 235

124065 124066 124067 124068 130235 124070

2 2 2 2 2 2

x x x x x x

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Wood

Order: 325mm Auger Module AUGER325

Stock Layout

475mm Module Selection

Bottom

Middle

Top

T: 0161 483 5557

reisser.co.uk

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

size (mm)

product code

quantity

25.0 x 235 32.0 x 235 10.0 x 460 12.0 x 460 14.0 x 460 16.0 x 460 20.0 x 460 22.0 x 460 25.0 x 460 10.0 x 235 12.0 x 235 13.0 x 235 14.0 x 235 16.0 x 235 18.0 x 235 19.0 x 235 20.0 x 235 22.0 x 235 6.0 x 155 8.0 x 155 10.0 x 155 12.0 x 155 16.0 x 155 20.0 x 155 25.0 x 155 6.0 x 235 8.0 x 235

207717 124078 124081 124082 124083 124084 124086 124087 207718 124067 124068 130235 124069 124070 124071 190235 124072 124073 114065 114066 114067 114068 114070 114072 207716 124065 124066

2 2 1 1 1 1 1 1 1 2 2 1 2 2 1 1 2 2 2 2 2 2 2 2 2 2 2

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: 475mm Auger Module AUGER475

T: +353 579 333 314

reisser.ie

137

MERCHANDISING

Stock Profile-Single Module


AUGER BITS

HEX & SDS-plus SHANK Stock Layout 475mm Module

475mm Module

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

2 x 475mm Module Selection Stock Profile-Left Module quantity

Hex Shank 20.0 x 460 Hex Shank 22.0 x 460 Hex Shank 25.0 x 460 Hex Shank 32.0 x 460 SDS-Plus Shank 8.0 x 235 SDS-Plus Shank 10.0 x 235 SDS-Plus Shank 12.0 x 235 SDS-Plus Shank 16.0 x 235 SDS-Plus Shank 20.0 x 235 Hex Shank 12.0 x 235 Hex Shank 13.0 x 235 Hex Shank 14.0 x 235 Hex Shank 16.0 x 235 Hex Shank 18.0 x 235 Hex Shank 19.0 x 235 Hex Shank 20.0 x 235 Hex Shank 20.0 x 235 Hex Shank 22.0 x 235 Hex Shank 10.0 x 100 Hex Shank 12.0 x 100 Hex Shank 16.0 x 100 Hex Shank 20.0 x 100 Hex Shank 22.0 x 100 Hex Shank 25.0 x 100 Hex Shank 32.0 x 100 Hex Shank 6.0 x 155 Hex Shank 8.0 x 155

124086 124087 207718 320460 145290 145291 145292 145294 145296 124068 130235 124069 124070 124071 190235 124072 124072 124073 124102 124103 124106 124107 124108 124109 124117 114065 114066

1 1 2 2 2 2 2 2 2 2 1 2 2 1 1 2 2 2 2 2 2 2 2 2 2 2 2

Top

product code

Middle

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

type/ size (mm)

Bottom

Bottom

Middle

MERCHANDISING

Top

Wood

Stock Profile-Right Module

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

type/ size (mm)

product code

quantity

SDS-Plus Shank 22.0 x 235 SDS-Plus Shank 25.0 x 235 SDS-Plus Shank 10.0 x 460 SDS-Plus Shank 12.0 x 460 SDS-Plus Shank 16.0 x 460 SDS-Plus Shank 18.0 x 460 SDS-Plus Shank 20.0 x 460 SDS-Plus Shank 22.0 x 460 SDS-Plus Shank 25.0 x 460 Hex Shank 25.0 x 235 Hex Shank 25.0 x 235 Hex Shank 32.0 x 235 Hex Shank 8.0 x 460 Hex Shank 10.0 x 460 Hex Shank 12.0 x 460 Hex Shank 14.0 x 460 Hex Shank 16.0 x 460 Hex Shank 18.0 x 460 Hex Shank 10.0 x 155 Hex Shank 12.0 x 155 Hex Shank 16.0 x 155 Hex Shank 20.0 x 155 Hex Shank 25.0 x 155 Hex Shank 32.0 x 155 Hex Shank 6.0 x 235 Hex Shank 8.0 x 235 Hex Shank 10.0 x 235

145297 145000 124120 124121 124124 124125 124128 124129 124132 207717 207717 124078 124080 124081 124082 124083 124084 124085 114067 114068 114070 114072 207716 124118 124065 124066 124067

2 2 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2

Order: 475mm Auger Bit Double Module 2XAUGER475

138

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


COUNTERSINKS AND

BRAD POINT DRILLS

Stock Layout

Retail CDU Selection Stock Profile-Single Module

Bottom

Top

1 2 3 4 5 6 1 2 3 4 5 6

type/ size (mm) Shell Drill C/S 12.0 (3.0) Shell Drill C/S 12.0 (4.0) Shell Drill C/S 12.0 (5.0) Shell Drill C/S 12.0 (6.0) B/P Wood Bit 3.0 x 61 B/P Wood Bit 4.0 x 75 Wood C/S 10.0 Wood C/S 13.0 Wood C/S 16.0 Wood C/S 20.0 B/P Wood Bit 5.0 x 86 B/P Wood Bit 6.0 x 93

product code

quantity

SDC123 SDC124 SDC125 SDC126 105810 105811 124164 124165 124166 124167 105812 105813

3 3 3 3 5 5 5 5 3 3 5 5

Counter Display Unit

1 2 3 4 5 6

1 2 3 4 5 6

Order: Countersink & Brad Point CDU CSBRADCTCDU

DRIVER BIT ACCESSORIES

Stock Layout

Retail CDU Selection

Top

1 2 3 4

Middle

1 2 3

Bottom

4 1 2 3

type/ size (mm)

product code

Magnetic Adaptor MAGW E6.3 x 60 Magnetic Adaptor MAGCW & C/Clip E6.3 x 60 Magnetic Adaptor MAGCW & C/Clip E6.3 x 60 Magnetic Adaptor MAGC150W & C/Clip E6.3 x 150 Magnetic Adaptor MAGSSW S/S E6.3 x 60 Nut Setter NS8W E6.3 x 8 (5/16”) Quick Release QRW Adaptor E6.3 x 60 Quick Release QR150W Adaptor E6.3 x 150 Magnetic Adaptor SDSW SDS plus x 75 Imp. Nut Setter IMPNS8W E6.3 x 65 8 (5/16”) All Hex Adaptor AHAW E6.3 x 60

quantity

Counter Display Unit

6 6

1

2

3

1

2

3

4

6 3 3

4

6 3

1

2

3

2 3 2 2

Order: Driver Bit Accessory CDU DBACTCDU

reisser.co.uk

T: +353 579 333 314

reisser.ie

139

MERCHANDISING

Stock Profile-Single Module

Top quality bit holders and nutsetters.

T: 0161 483 5557

Wood & Screwdriver Bits

For drilling and countersinking in soft and medium hardwoods.


TORSION DRIVER BITS High quality bits for use with torsion

Stock Layout

Retail CDU Selection

screwdrivers.

Stock Profile-Single Module

TORSION IMPACT DRIVER BITS

T: 0161 483 5557

reisser.co.uk

PZ1 x 25 PZ01W PZ2 x 25 PZ02W PZ3 x 25 PZ03W PH1 x 25 PH01W PH2 x 25 PH02W PH3 x 25 PH03W T10 x 25 T10W T15 x 25 T15W T20 x 25 T20W T25 x 25 T25W T30 x 25 T30W T40 x 25 T40W SQ2 x 25 R2W 3.5 x 0.6 x 25 3506W 4.5 x 0.6 x 25 4506W 5.5 x 0.8 x 25 5508W Magnetic Adaptor MAGCW & C/Clip 60 HX3 x 25 HX3W HX4 x 25 HX4W HX5 x 25 HX5W HX6 x 25 HX6W

Top

1 2 3 4 5 6 1 2 3 4 5 6 1

140

product code

quantity 4 10 6 2 6 4 3 3 3 3 6 3 3 3 3 3

Counter Display Unit

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4

5

1 2 3 4

6 3 3 3 3

Order: Torsion Driver Bit CDU TORSIONCTCDU

Stock Layout

Stock Profile-Single Module

Middle

Specified for use with torsion impact screwdrivers.

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4

type/ size (mm)

Retail CDU Selection

Bottom

MERCHANDISING

Screwdriver Bits

Bottom

Row 3

Row 2

Top

2 3 4 5 6

type/ size (mm)

product code

PZ2 x 25 IMPPZ02W PZ3 x 25 IMPPZ03W T20 x 25 IMPT20W T25 x 25 IMPT25W T30 x 25 IMPT30W T40 x 25 IMPT40W PZ2 x 50 IMPPZ0250W PZ3 x 50 IMPPZ0350W T20 x 50 IMPT2050W T25 x 50 IMPT2550W T30 x 50 IMPT3050W T40 x 50 IMPT4050W All Hex Impact AHAW Adaptor 60 Impact Nut Setter IMPNS8W 65/8 (5/16”) (Pack 10) PZ2 x 25 IMPPZ02PB (Pack 10) PZ3 x 25 IMPPZ03PB (Pack 10) PZ2 x 50 IMPPZ0250PB (Pack 10) PZ3 x 50 IMPPZ0350PB

quantity 10 5 4 4 6 4 10 5 4 4 6 4 4

Counter Display Unit

1 2 3 4 5 6

1 2 3 4 5 6

1

4 4 4 4 4

T: +353 579 333 314

2

3

4

5

6

Order: Impact Driver Bit CDU IMPACTCTCDU

reisser.ie


SCREWDRIVER BIT EXTENSION PANEL

Stock Layout

FOR DISPLAY UNITS

1

2

3 4

5

6

1

2

3 4

5

6

1

2

3 4

5

6

7

7

8

9 10 11 12 13

7

8

8

9 10 11 12 13

9 10 11 12

Extension Panel

Bottom

1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 13

type/ size (mm) Torsion Bit PZ1 x 25 Torsion Bit PZ2 x 25 Torsion Bit PZ3 x 25 Torsion Bit PH1 x 25 Torsion Bit PH2 x 25 Torsion Bit PH3 x 25 Torsion Bit PZ2 x 150 Torsion Impact Bit PZ2 x 25 Torsion Impact Bit PZ3 x 25 Torsion Impact Bit T20 x 25 Torsion Impact Bit T25 x 25 Torsion Impact Bit T30 x 25 Torsion Impact Bit T40 x 25 Torsion Bit PZ1 x 50 Torsion Bit PZ2 x 50 Torsion Bit PZ3 x 50 Torsion Bit PH2 x 50 Torsion Bit PH3 x 50 Torsion Bit SQ2 x 25 Torsion Impact Bit PZ2 x 50 Torsion Impact Bit PZ3 x 50 Torsion Impact Bit T20 x 50 Torsion Impact Bit T25 x 50 Torsion Impact Bit T30 x 50 Torsion Impact Bit T40 x 50 Torsion Bit T10 x 25 Torsion Bit T15 x 25 Torsion Bit T20 x 25 Torsion Bit T25 x 25 Torsion Bit T30 x 25 Torsion Bit T40 x 25 Torsion Bit (Pack 10) PZ2 x 25 Torsion Bit (Pack 10) PH2 x 25 Torsion Impact Bit (Pack 10) PZ2 x 25 Nut Setter 8 Magnetic Adaptor 60 Magnetic Adaptor & C/Clip 60 All Hex Impact Adaptor 60

product code

quantity

PZ01W PZ02W PZ03W PH01W PH02W PH03W PZ02150W IMPPZ02W IMPPZ03W IMPT20W IMPT25W IMPT30W IMPT40W PZ0150W PZ0250W PZ0350W PH0250W PH0350W R2W IMPPZ0250W IMPPZ0350W IMPT2050W IMPT2550W IMPT3050W IMPT4050W T10W T15W T20W T25W T30W T40W PZ02PB PH02PB IMPPZ02PB NS8W MAGW MAGCW AHAW

5 15 10 2 10 5 3 5 3 3 3 3 3 3 5 3 3 2 4 5 3 3 3 3 3 2 2 3 3 5 3 4 4 4 5 6 5 4

MERCHANDISING

Middle

Top

Screwdriver Bits

Stock Profile

Order: Screwdriver Bit Extension Panel DBEP

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

141


SCREWDRIVER METAL COUNTER DISPLAY UNIT

Stock Layout 335mm Module

Convenient space-saving display for

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10

screwdriver bits and accessories.

1 1 1 2 2 2 3 3 4 3 4 5 4 6 5 5 7 8

Bulk CDU Selection Stock Profile-Single Module

Column 5

Column 4

Column 3

Column 2

MERCHANDISING

Column 1

Screwdriver Bits

1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5

type/ size (mm)

product code

quantity

Torsion Bit (Bagged in 10’s) SQ2 x 25 Torsion Bit (Bagged in 10’s) 4.5 x 0.6 x 25 Torsion Bit (Bagged in 10’s) HX3 x 25 Torsion Bit (Bagged in 10’s) HX5 x 25 Torsion Bit (Bagged in 10’s) T10 x 25 Torsion Bit (Bagged in 10’s) T20 x 25 Torsion Bit (Bagged in 10’s) T30 x 25 Torsion Bit (Bagged in 10’s) PZ1 x 25 Torsion Bit (Bagged in 10’s) PZ2 x 25 Torsion Bit (Bagged in 10’s) PZ3 x 25 Torsion Bit (Bagged in 10’s) 3.5 x 0.6 x 25 Torsion Bit (Bagged in 10’s) 5.5 x 0.8 x 25 Torsion Bit (Bagged in 10’s) HX4 x 25 Torsion Bit (Bagged in 10’s) HX6 x 25 Torsion Bit (Bagged in 10’s) PH1 x 25 Torsion Bit (Bagged in 10’s) PH2 x 25 Torsion Bit (Bagged in 10’s) PH3 x 25 Torsion Bit (Bagged in 10’s) T15 x 25 Torsion Bit (Bagged in 10’s) T25 x 25 Torsion Bit (Bagged in 10’s) T40 x 25 Torsion Bit (Bagged in 10’s) PZ2 x 50 Torsion Bit (Bagged in 10’s) PZ3 x 50 Torsion Bit (Bagged in 10’s) PH2 x 50 Torsion Bit (Bagged in 10’s) PH3 x 50 Torsion Bit (Bagged in 10’s) PZ2 x 150 All Hex Adaptor (Bagged in 5’s) E6.3 x 60 Torsion Impact Bit (Bagged in 10’s) PZ2 x 25 Torsion Impact Bit (Bagged in 10’s) PZ3 x 25 Torsion Impact Bit (Bagged in 10’s) T20 x 25 Torsion Impact Bit (Bagged in 10’s) T25 x 25 Torsion Impact Bit (Bagged in 10’s) T30 x 25 Torsion Impact Bit (Bagged in 10’s) PZ2 x 50 Torsion Impact Bit (Bagged in 10’s) PZ3 x 50 Q/R Adaptor (Bagged in 5’s) E6.3 x 60 2pc. Magnetic Adaptor (Bagged in 10’s) E6.3 x 60 2pc. Mag. Adaptor & C/Clip (Bagged in 10’s) E6.3 x 60 Nut Setter (Bagged in 5’s) E6.3 x 65 2pc. Mag. Adaptor & C/Clip (Bagged in 5’s) E6.3 x 150

R2L 4506L HX3L HX5L T10L T20L T30L PZ01L PZ02L PZ03L 3506L 5508L HX4L HX6L PH01L PH02L PH03L T15L T25L T40L PZ0250L PZ0350L PH0250L PH0350L PZ02150L AHAL IMPPZ02L IMPPZ03L IMPT20L IMPT25L IMPT30L IMPPZ0250L IMPPZ0350L QRL MAGL MAGCL NS8L MAGC150L

10 10 10 10 10 10 20 10 100 20 10 10 10 10 10 20 10 10 10 10 20 10 10 10 10 5 30 10 10 10 10 20 10 5 20 20 10 5

Order: Screwdriver Bit Bulk Dispenser BULKDB

142

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


COMBIMODULES Combining two or more ranges on the same module can be

Stock Layout

325mm Module Selection

useful where space is limited. Flat/Hex Auger/SDS-Plus Auger: Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type/ size (mm) SDS-Plus Shank Auger Bit 10.0 x 235 SDS-Plus Shank Auger Bit 12.0 x 235 SDS-Plus Shank Auger Bit 16.0 x 235 SDS-Plus Shank Auger Bit 20.0 x 235 SDS-Plus Shank Auger Bit 22.0 x 235 SDS-Plus Shank Auger Bit 25.0 x 235 Hex Shank Auger Bit 10.0 x 235 Hex Shank Auger Bit 12.0 x 235 Hex Shank Auger Bit 16.0 x 235 Hex Shank Auger Bit 20.0 x 235 Hex Shank Auger Bit 25.0 x 235 Hex Shank Auger Bit 32.0 x 235 Flat Wood Bit 10 x 150 Flat Wood Bit 12 x 150 Flat Wood Bit 16 x 150 Flat Wood Bit 20 x 150 Flat Wood Bit 25 x 150 Flat Wood Bit 32 x 150

325mm Module

product code

quantity

145291 145292 145294 145296 145297 145000 124067 124068 124070 124072 207717 124078 202216 202217 202220 202222 202225 202229

2 2 2 2 2 2 2 2 2 2 2 2 4 5 10 10 10 5

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Flat/Hex Auger/Fast Auger: Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

type/ size (mm) 4-Tip Fast Auger Bit 10.0 x 165 4-Tip Fast Auger Bit 12.0 x 165 4-Tip Fast Auger Bit 16.0 x 165 4-Tip Fast Auger Bit 20.0 x 165 4-Tip Fast Auger Bit 25.0 x 165 4-Tip Fast Auger Bit 32.0 x 165 Hex Shank Auger Bit 10.0 x 235 Hex Shank Auger Bit 12.0 x 235 Hex Shank Auger Bit 16.0 x 235 Hex Shank Auger Bit 20.0 x 235 Hex Shank Auger Bit 25.0 x 235 Hex Shank Auger Bit 32.0 x 235 Flat Wood Bit 10 x 150 Flat Wood Bit 12 x 150 Flat Wood Bit 16 x 150 Flat Wood Bit 20 x 150 Flat Wood Bit 25 x 150 Flat Wood Bit 32 x 150

325mm Module

product code

quantity

4TIP10165 4TIP12165 4TIP16165 4TIP20165 4TIP25165 4TIP32165 124067 124068 124070 124072 207717 124078 202216 202217 202220 202222 202225 202229

2 2 2 2 2 2 2 2 2 2 2 2 4 5 10 10 10 5

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Order: Auger/Flat Bit/4TIP Mixed Module MIXWOOD325V2

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

143

MERCHANDISING

Stock Layout

325mm Module Selection

Combi-Modules

Order: Auger/Flat Bit Mixed Module MIXWOOD325V1


COMBIMODULES Combining two or more ranges on the same module can be

Stock Layout

475mm Module Selection

useful where space is limited. Zentro/Prem Plus: Stock Profile-Single Module

Combi-Modules

Bottom

Middle

Top

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

475mm Module

type/ size (mm)

product code

quantity

Prem Plus Masonry Bit 12.0 x 150 Prem Plus Masonry Bit 14.0 x 150 Prem Plus Masonry Bit 16.0 x 150 Prem Plus Masonry Bit 8.0 x 200 Prem Plus Masonry Bit 10.0 x 200 Prem Plus Masonry Bit 12.0 x 200 Prem Plus Masonry Bit 10.0 x 400 Prem Plus Masonry Bit 12.0 x 400 Prem Plus Masonry Bit 16.0 x 400 Prem Plus Masonry Bit 4.0 x 150 Prem Plus Masonry Bit 5.0 x 150 Prem Plus Masonry Bit 5.5 x 150 Prem Plus Masonry Bit 6.0 x 150 Prem Plus Masonry Bit 6.5 x 150 Prem Plus Masonry Bit 7.0 x 150 Prem Plus Masonry Bit 8.0 x 150 Prem Plus Masonry Bit 10.0 x 150 Prem Plus Masonry Bit 12.0 x 150 Zentro SDS-Plus Drill Bit 5.5 x 160 Zentro SDS-Plus Drill Bit 6.0 x 160 Zentro SDS-Plus Drill Bit 7.0 x 160 Zentro SDS-Plus Drill Bit 8.0 x 160 Zentro SDS-Plus Drill Bit 10.0 x 160 Zentro SDS-Plus Drill Bit 8.0 x 210 Zentro SDS-Plus Drill Bit 10.0 x 210 Zentro SDS-Plus Drill Bit 12.0 x 210 Zentro SDS-Plus Drill Bit 16.0 x 210

PP12150 PP14150 PP16150 PP80200 PP10200 PP12200 PP10400 PP12400 PP16400 PP40150 PP50150 PP55150 PP60150 PP65150 PP70150 PP80150 PP10150 PP12150 11555160 11560160 11570160 11580160 11510160 11580210 11510210 11512210 11516210

3 2 2 5 4 3 2 2 2 3 3 10 10 4 10 5 4 3 5 5 5 3 3 5 3 2 2

1 2 3 4 5 6 7 8 9

1 2 3 4 5 6 7 8 9

Order: Prem Plus/Zentro Mixed Module MIXPPZ475

Stock Layout

325mm Module Selection MERCHANDISING

1 2 3 4 5 6 7 8 9

HSS-G/Long/Blacksmith’s: Stock Profile-Single Module

Bottom

Middle

Top

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

325mm Module

type/ size (mm)

product code

quantity

HSS-G Blacksmith’s Drill 14.0 HSS-G Blacksmith’s Drill 15.0 HSS-G Blacksmith’s Drill 16.0 HSS-G Blacksmith’s Drill 18.0 HSS-G Blacksmith’s Drill 20.0 HSS-G Blacksmith’s Drill 22.0 HSS-G Long Series Drill (2Pcs) 3.0 HSS-G Long Series Drill (2Pcs) 3.5 HSS-G Long Series Drill (1Pc) 4.0 HSS-G Long Series Drill (1Pc) 4.5 HSS-G Long Series Drill (1Pc) 5.0 HSS-G Long Series Drill (1Pc) 6.0 HSS Cobalt Jobber Drill (1Pc) 3.0 HSS Cobalt Jobber Drill (1Pc) 3.5 HSS Cobalt Jobber Drill (1Pc) 4.0 HSS Cobalt Jobber Drill (1Pc) 4.5 HSS Cobalt Jobber Drill (1Pc) 5.0 HSS Cobalt Jobber Drill (1Pc) 6.0

240886 240888 240890 240894 240898 240899 145131 145133 145134 145136 145138 145140 145157 145161 145162 145165 145167 145171

3 2 2 3 2 1 10 10 15 5 5 5 10 10 10 10 10 10

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

Order: HSS Mixed Module HSSMIX325

144

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


CHUCKS Suitable for Rotary/Impact Drills.

Stock Layout

Retail CDU Selection Stock Profile-Single Module qty

13mm Keyed Chuck 1/2” x 20F, 850w

KEY13

4

Standard 13mm Keyless Chuck 1/2” x 20F, 700w

KEYL13

4

1 H/D 13mm Keyless Chuck, 2 1/2” x 20F, 1200w

KEYL13HD

4

H/D 13mm Keyless Chuck,

KEYL13SS

2

MFKEY

5

SDSKEY13

2

SDSKEYL13

2

SDSKEYL13HD

2

SDSADAPT

5

3 Single Sleeve 1/2” x 20F, 1200w 4 Chuck Key, S2/S14 Multi-fit

Bottom

13mm Keyed Chuck 1 1/2” x 20F, 850w and SDS-plus Adaptor

Counter Display Unit

Standard 13mm Keyless Chuck

2 1/2” x 20F, 700w and SDS-plus Adaptor

1

2

3

4

1

2

3

4

1

2

3

4

H/D 13mm Keyless Chuck,

3 1/2” x 20F, 1200w and SDS-plus Adaptor

4 1/2” x 20F to SDS-plus Adaptor

Order: Chuck CDU CHUCKCTCDU

POWERSPATEN CHISELS

Stock Profile-Single Module

Top

A selection of the most popular SDS-plus and SDS-max chisels from our

Stock Layout

325mm Module Selection

Bottom

Middle

PowerSpaten range.

1 2 3 4 1 2 3 4 1 2 3 4 5 6

SDS-max SDS-max SDS-max SDS-max

325mm Module

type/ size (mm)

product code

qty

Bull Point 400 Chisel 25 x 400 Chisel 40 x 400 Chisel 80 x 300

MAXP400 MAXC400 MAX50400 MAX80300

2 2 2 2

STC250 STC250

3 3

SWTC165

2

SDS-plus Tile Chisel 40 x 250 SDS-plus Tile Chisel 40 x 250 SDS-plus Wide Tile Chisel 75 x 165 SDS-plus Wide Tile Chisel 75 x 165 SDS-plus Bull Point 250 SDS-plus Chisel 20 x 250 SDS-plus Chisel 20 x 250 SDS-plus Chisel 40 x 250 SDS-plus Chisel 40 x 250 SDS-plus TCT Slotting Tool 30 x 200

SWTC166

2

SBP250 SC250 SC250 SSC250 SSC250

3 3 3 3 3

STCT200

2

1

2

3

4

1

2

3

4

1 2 3 4 5 6

Order; PowerSpaten SDS-plus Chisel 325mm Module PCHIS325

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

145

SDS Chucks & Accessories and Chisels

product code

1 2 3 4

type/ size(mm)

MERCHANDISING

Middle

Top


NOTES

146

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie


NOTES

T: 0161 483 5557

reisser.co.uk

T: +353 579 333 314

reisser.ie

147


REISSER LIMITED TERMS OF BUSINESS 1. INTERPRETATION 1.1 Definitions. In these Conditions, the following definitions apply: Business Day: a day (other than a Saturday, Sunday or public holiday) when banks in London are open for business. Conditions: the terms and conditions set out in this document as amended from time to time in accordance with clause 11.6. Contract: the contract between the Supplier and the Customer for the sale and purchase of the Goods in accordance with these Conditions. Customer: the person or firm who purchases the Goods from the Supplier. Force Majeure Event: has the meaning given in clause 10. Goods: the goods (or any part of them) set out in the Order. Order: the Customer’s order for the Goods, as set out in the Customer’s written acceptance of the Supplier’s quotation failing which in the Customer’s purchase order form. Specification: any specification for the Goods described in the Supplier’s Catalogue. Supplier: REISSER LIMITED (registered in England and Wales with company number 1596414. 1.2 Construction. In these Conditions, the following rules apply: (a) A person includes a natural person, corporate or unincorporated body (whether or not having separate legal personality). (b) A reference to a statute or statutory provision is a reference to such statute or provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted. (c) A reference to writing or written includes faxes and e-mails. 2. BASIS OF CONTRACT 2.1 These Conditions apply to the Contract to the exclusion of any other terms that the Customer seeks to impose or incorporate, or which are implied by trade, custom, practice or course of dealing. 2.2 The Order constitutes an offer by the Customer to purchase the Goods in accordance with these Conditions. The Customer is responsible for ensuring that the terms of the Order and any applicable Specification are complete and accurate. 2.3 The Order shall only be deemed to be accepted when the Supplier issues a written acceptance of the Order failing which at the date of delivery or partial delivery of the order, at which point the Contract shall come into existence. 2.4 The Contract constitutes the entire agreement between the parties. The Customer acknowledges that it has not relied on any statement, promise or representation made or given by or on behalf of the Supplier which is not set out in the Contract. 2.5 Any samples, drawings, descriptive matter, or advertising produced by the Supplier and any descriptions or illustrations contained in the Supplier’s catalogues or brochures are produced for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract or have any contractual force. 2.6 A quotation for the Goods given by the Supplier shall not constitute an offer. A quotation shall only be valid for a period of 20 Business Days from its date of issue. 3. GOODS 3.1 The Goods are described in the Supplier’s catalogue. 3.2 The Supplier reserves the right to amend any specification relating to the Goods: 3.2.1 if required by any applicable statutory or regulatory requirements; or 3.2.2 to conform with any E.C. requirements; or 3.2.3 where deemed desirable insofar as does not materially affect the quality and performance of the Goods. 3.3 Save as herein provided contracts or orders may not be cancelled by the Customer nor may Goods be returned except by agreement in writing of both parties upon payment to the Supplier or such amount as may be necessary to indemnify the Supplier against all losses (including loss of profit) costs (including the cost of all labour and materials used), damages, charges (including storage charges) and expenses incurred by the Supplier as a result of each cancellation or return. 3.4 The Supplier reserves the right to deliver up to 10% more or less than the quantity ordered. The quantity delivered shall be deemed to be the quantity ordered and the Customer shall have no right to reject the Goods or to claim damages but must pay for the Goods delivered at the price agreed. 4. DELIVERY 4.1 All times or dates given for delivery of the Goods shall be in good faith but shall not be the essence of any Contract. The Goods may be delivered by the Supplier in advance of the quoted delivery date upon giving reasonable notice to the Customer. 4.2 Unless agreed in writing and signed on behalf of the Supplier all Goods are supplied ex-works of the Supplier. 4.3 Where the Goods are handed to a carrier for carriage to the Customer or to a port for export any such carrier shall be deemed to be the Agent of the Customer and not of the Supplier for all purposes. 4.4 The Customer shall inspect the Goods supplied immediately upon receipt and no liability for non delivery, partial loss or damage to the Goods occurring prior to delivery will attach to the Supplier unless claims to that effect are notified in writing by the Customer to the Supplier (with a copy to the carrier if applicable). (i) Within ten days of despatch for partial loss or damage or non compliance with the Contract; or (ii) Within five days of the date the invoice is received for non delivery. 4.5 If the Customer shall fail to give notice in accordance with Condition 4.4 above the Goods shall be deemed to be in all respects in accordance with the Contract and the Customer shall be bound to accept and pay for the same accordingly. 4.6 If the Supplier fails to deliver the Goods, its liability shall be limited to the costs and expenses incurred by the Customer in obtaining replacement goods of similar description and quality in the cheapest market available, less the price of the Goods. The Supplier shall have no liability for any failure to deliver the Goods to the extent that such failure is caused by a Force Majeure Event or the Customer’s failure to provide the Supplier with adequate delivery instructions or any other instructions that are relevant to the supply of the Goods. 4.7 If the Customer fails to accept delivery of the Goods within three Business Days of the Supplier notifying the Customer that the Goods are ready, then, except where such failure or delay is caused by a Force Majeure Event or the Supplier’s failure to comply with its obligations under the Contract: (a) delivery of the Goods shall be deemed to have been completed at 9.00 am on the third Business Day after the day on which the Supplier notified the Customer that the Goods were ready; and (b) the Supplier shall store the Goods until delivery takes place, and charge the Customer for all related costs and expenses (including insurance). 4.8 If 10 Business Days after the day on which the Supplier notified the Customer that the Goods were ready for delivery the Customer has not accepted delivery of them, the Supplier may resell or otherwise dispose of part or all of the Goods and, after deducting reasonable storage and selling costs, account to the Customer for any excess over the price of the Goods or charge the Customer for any shortfall below the price of the Goods. 4.9 The Customer shall not be entitled to reject the Goods if the Supplier delivers up to and including 10% more or less than the quantity of Goods ordered, but a pro rata adjustment shall be made to the Order invoice on receipt of notice from the Customer that the wrong quantity of Goods was delivered. 4.10 The Supplier may deliver the Goods by instalments, which shall be invoiced and paid for separately. Each instalment shall constitute a separate Contract. Any delay in delivery or defect in an instalment shall not entitle the Customer to cancel any other instalment. 5. QUALITY 5.1 Subject to clause 5.2, if: (a) the Customer gives notice in writing to the Supplier within a reasonable and appropriate time of discovery that some or all of the Goods do not meet with the specification; and (b) the Supplier is given a reasonable opportunity of examining such Goods; and (c) the Customer (if asked to do so by the Supplier) returns such Goods to the Supplier’s place of business, the Supplier shall, at its option, replace the defective Goods, or refund the price of the Goods in full, if it is found that the Goods do not meet with the Specification. 5.2 The Supplier shall not be liable for Goods’ failure to comply with the warranty set out in clause Error! Reference source not found. in any of the following events: (a) the Customer makes any further use of such Goods after giving notice in accordance with clause 5.1; (b) the defect arises because the Customer failed to follow the Supplier’s oral or written instructions as to the storage, commissioning, installation, use and maintenance of the Goods or good trade practice regarding the same; (c) the defect arises as a result of the Supplier following any drawing, design or Specification supplied by the Customer; (d) the Customer alters or repairs such Goods without the written consent of the Supplier; (e) the defect arises as a result of fair wear and tear, wilful damage, negligence, or abnormal storage or working conditions; or (f) the Goods differ from the Specification as a result of changes made to ensure they comply with applicable statutory or regulatory requirements. 5.3 Except as provided in this clause 5, the Supplier shall have no liability to the Customer in respect of the Goods’ failure to comply with Specification set out in clause 5.1. 5.4 Except as set out in these Conditions, all warranties, conditions and other terms implied by statute or common law are, to the fullest extent permitted by law, excluded from the Contract. 5.5 These Conditions shall apply to any repaired or replacement Goods supplied by the Supplier. 5.6 Representations of the appearance and performance of Goods vary in every case according to the nature and circumstances of use and the treatment of the Goods after leaving the Supplier’s premises. All representations furnished by the Supplier in respect of the Goods whether or not in writing are furnished only on the basis that they will not form part of the Contract or be relied upon by the Customer for any purpose unless and to the extent that they are expressly warranted or guaranteed in writing by the Seller and are as such expressly stated by the Supplier to form part of the Contract. 5.7 Notwithstanding that a sample of Goods may have been exhibited to and inspected by the Customer or results of standard tests upon a sample furnished to the Customer IT IS DECLARED that such sample was so exhibited, inspected or tested solely to enable the Customer to gauge for itself the quality of the bulk and not so as to constitute a sale by sample. The Customer shall take the Goods at its own risk as to their corresponding with the sample or as to their quality, condition or sufficiency for any purposes. 6. TITLE AND RISK 6.1 The risk in the Goods shall pass to the Customer on completion of delivery. 6.2 Title to the Goods shall not pass to the Customer until the Supplier has received payment in full (in cash or cleared funds) for: (a) the Goods; and (b) any other goods or services that the Supplier has supplied to the Customer in respect of which payment has become due. 6.3 Until title to the Goods has passed to the Customer, the Customer shall: (a) hold the Goods on a fiduciary basis as the Supplier’s bailee; (b) store the Goods separately from all other goods held by the Customer so that they remain readily identifiable as the Supplier’s property; (c) not remove, deface or obscure any identifying mark or packaging on or relating to the Goods;

(d) maintain the Goods in satisfactory condition and keep them insured against all risks for their full price from the date of delivery; (e) notify the Supplier immediately if it becomes subject to any of the events listed in clause 8.2; and (f) give the Supplier such information relating to the Goods as the Supplier may require from time to time, but the Customer may resell or use the Goods in the ordinary course of its business. 6.4 If before title to the Goods passes to the Customer the Customer becomes subject to any of the events listed in clause 8.2, or the Supplier reasonably believes that any such event is about to happen and notifies the Customer accordingly, then, provided that the Goods have not been resold, or irrevocably incorporated into another product, and without limiting any other right or remedy the Supplier may have, the Supplier may at any time require the Customer to deliver up the Goods and, if the Customer fails to do so promptly, enter any premises of the Customer or of any third party where the Goods are stored in order to recover them. 7. PRICE AND PAYMENT 7.1 The price of the Goods shall be the price set out in the Order, or, if no price is quoted, the price set out in the Supplier’s published price list in force as at the date of delivery. 7.2 The Supplier may, by giving notice to the Customer at any time 15 Business Days before delivery, increase the price of the Goods to reflect any increase in the cost of the Goods that is due to: (a) any factor beyond the Supplier’s control (including foreign exchange fluctuations, increases in taxes and duties, and increases in labour, materials and other manufacturing costs); (b) any request by the Customer to change the delivery date(s), quantities or types of Goods ordered, or the Specification; or (c) any delay caused by any instructions of the Customer or failure of the Customer to give the Supplier adequate or accurate information or instructions. 7.3 The price of the Goods is exclusive of the costs and charges of packaging, insurance and transport of the Goods, which shall be invoiced to the Customer. 7.4 The price of the Goods is exclusive of amounts in respect of value added tax (VAT). The Customer shall, on receipt of a valid VAT invoice from the Supplier, pay to the Supplier such additional amounts in respect of VAT as are chargeable on the supply of the Goods. 7.5 The Supplier may invoice the Customer for the Goods on or at any time after the completion of delivery. 7.6 The Customer shall pay the invoice in full and in cleared funds within 30 days of the date of invoice. Payment shall be made to the bank account where requested in writing by the Supplier. Time of payment is of the essence. 7.7 If the Customer fails to make any payment due to the Supplier under the Contract by the due date for payment (due date), then the Customer shall pay interest on the overdue amount at the higher of the rate of 4% per annum above HSBC’s base rate from time to time at 8% per annum. Such interest shall accrue on a daily basis from the due date until the date of actual payment of the overdue amount, whether before or after judgment. The Customer shall pay the interest together with the overdue amount. 7.8 The Customer shall pay all amounts due under the Contract in full without any deduction or withholding except as required by law and the Customer shall not be entitled to assert any credit, set-off or counterclaim against the Supplier in order to justify withholding payment of any such amount in whole or in part. The Supplier may at any time, without limiting any other rights or remedies it may have, set off any amount owing to it by the Customer against any amount payable by the Supplier to the Customer. 7.9 If payment shall not have been by the Customer in accordance with condition 7.6 above the Supplier may appropriate any payment made by the Customer to such of the Goods as the Supplier shall think fit and shall have the right at its sole discretion and without prejudice to its other rights or remedies to: (a) suspend any outstanding Contracts with the Customer; or (b) cancel any outstanding Contracts with the Customer; or (c) suspend any further deliveries with the Customer; Summarily by notice in writing without compensation to the Customer but with the right to be paid in respect of all work done for or Goods supplied to the Customer and to be reimbursed the amount of all moneys paid out on account of the Customer up to the date of such cancellation. 8. CUSTOMER’S INSOLVENCY OR INCAPACITY 8.1 If the Customer becomes subject to any of the events listed in clause 8.2, or the Supplier reasonably believes that the Customer is about to become subject to any of them and notifies the Customer accordingly, then, without limiting any other right or remedy available to the Supplier, the Supplier may cancel or suspend all further deliveries under the Contract or under any other contract between the Customer and the Supplier without incurring any liability to the Customer, and all outstanding sums in respect of Goods delivered to the Customer shall become immediately due. 8.2 For the purposes of clause 8.1, the relevant events are: (a) the Customer suspends, or threatens to suspend, payment of its debts, or is unable to pay its debts as they fall due or admits inability to pay its debts, or (being a company) is deemed unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986, or (being an individual) is deemed either unable to pay its debts or as having no reasonable prospect of so doing, in either case, within the meaning of section 268 of the Insolvency Act 1986, or (being a partnership) has any partner to whom any of the foregoing apply; (b) the Customer commences negotiations with all or any class of its creditors with a view to rescheduling any of its debts, or makes a proposal for or enters into any compromise or arrangement with its creditors [other than (where the Customer is a company) where these events take place for the sole purpose of a scheme for a solvent amalgamation of the Customer with one or more other companies or the solvent reconstruction of the Customer]; (c) (being a company) a petition is filed, a notice is given, a resolution is passed, or an order is made, for or in connection with the winding up of the Customer, other than for the sole purpose of a scheme for a solvent amalgamation of the Customer with one or more other companies or the solvent reconstruction of the Customer or where an administrator as receiver is appointed; (d) (being an individual) the Customer is the subject of a bankruptcy petition or order or dies. 9. LIMITATION OF LIABILITY 9.1 Nothing in these Conditions shall limit or exclude the Supplier’s liability for: (a) death or personal injury caused by its negligence, or the negligence of its employees, agents or subcontractors (as applicable); (b) fraud or fraudulent misrepresentation; (c) breach of the terms implied by section 12 of the Sale of Goods Act 1979; (d) defective products under the Consumer Protection Act 1987; or (e) any matter in respect of which it would be unlawful for the Supplier to exclude or restrict liability. 9.2 Subject to clause 9.1: (a) the Supplier shall under no circumstances whatever be liable to the Customer, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any indirect or consequential loss arising under or in connection with the Contract; and (b) the Supplier’s total liability to the Customer in respect of all other losses arising under or in connection with the Contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, shall in no circumstances exceed £50,000.00. 10. FORCE MAJEURE Neither party shall be liable for any failure or delay in performing its obligations under the Contract to the extent that such failure or delay is caused by a Force Majeure Event. A Force Majeure Event means any event beyond a party’s reasonable control, which by its nature could not have been foreseen, or, if it could have been foreseen, was unavoidable, including strikes, lock-outs or other industrial disputes (whether involving its own workforce or a third party’s), failure of energy sources or transport network, acts of God, war, terrorism, riot, civil commotion, interference by civil or military authorities, national or international calamity, armed conflict, malicious damage, breakdown of plant or machinery, nuclear, chemical or biological contamination, sonic boom, explosions, collapse of building structures, fires, floods, storms, earthquakes, loss at sea, epidemics or similar events, natural disasters or extreme adverse weather conditions, or default of suppliers or subcontractors. 11. GENERAL 11.1 Assignment and subcontracting. (a) The Supplier may at any time assign, transfer or subcontract in all or any of its rights or obligations under the Contract. (b) The Customer may not assign, transfer, charge, subcontract or deal in any other manner with all or any of its rights or obligations under the Contract without the prior written consent of the Supplier. 11.2 Notices. (a) Any notice or other communication given to a party under or in connection with the Contract shall be in writing, addressed to that party at its registered office (if it is a company) or its principal place of business and shall be delivered personally, sent by pre-paid first class post, recorded delivery, commercial courier, fax or e-mail. (b) A notice or other communication shall be deemed to have been received: if delivered personally, when left at the address referred to in clause 11.2(a); if sent by pre-paid first class post or recorded delivery, at 9.00 am on the second Business Day after posting; if delivered by commercial courier, on the date and at the time that the courier’s delivery receipt is signed; or, if sent by fax or e-mail, one Business Day after transmission. (c) The provisions of this clause shall not apply to the service of any proceedings or other documents in any legal action. 11.3 Severance. If any invalid, unenforceable or illegal provision of the Contract would be valid, enforceable and legal if some part of it were deleted, the provision shall apply with the minimum modification necessary to make it legal, valid and enforceable. 11.4 Waiver. A waiver of any right or remedy under the Contract is only effective if given in writing and shall not be deemed a waiver of any subsequent breach or default. No failure or delay by a party to exercise any right or remedy provided under the Contract or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy. No single or partial exercise of such right or remedy shall preclude or restrict the further exercise of that or any other right or remedy. 11.5 Third party rights. A person who is not a party to the Contract shall not have any rights under or in connection with it. 11.6 Variation. Except as set out in these Conditions, any variation to the Contract, including the introduction of any additional terms and conditions, shall only be binding when agreed in writing and signed by the Supplier. 11.7 Governing law and jurisdiction. The Contract shall in all respects be governed by English law, and the parties irrevocably submit to the exclusive jurisdiction of the courts of England and Wales.

ALL TRADE MARKS ARE PROTECTED


reisser.co.uk

reisser.ie

info@reisser.co.uk

info@reisser.ie

T: 0161 483 5557

T: +353 579 333 314

Reisser UK Ltd. Bramhall Moor Technology Park Pepper Road, Hazel Grove, Stockport Cheshire SK7 5BW

f @ReisserLtd    l Reisser

Reisser Ireland Ltd. Midlands Gateway Business Park Kilbeggan, Co Westmeath Ireland, N91 H102

f ReisserIreland l @ReisserIreland

Reisser®, R2 and Cutter are all registered trademarks.

Profile for Four9Design

Reisser 2019 product catalogue  

#screws #power tool accessories #cutter #R2 #cratemate

Reisser 2019 product catalogue  

#screws #power tool accessories #cutter #R2 #cratemate