Page 1

EV Link:

Residential charger Technical characteristics Part No : Frequency : Earthing system : Power supply : Charging output :

NCA19130 50/60 Hz TT, TN(C), TN(S) 1P+N network version: 230 V Mode 3, 16 amps

Functions Charging control Start : Immediate – as soon as the cable is connected or on pressing the Start button Start : Deferred – upon an external order from a time switch or smart reader Stop : Automatic – battery full; manual – by pressing the Stop button

Part Number NCA19130 Characteristic Value Dimensions (L x W x H)

24.2 x 10 x 32.4 cm Weight 2.8kg Degree of protection IP41, IK8 Power supply 230 V~ single-phase supply (1P+N) Vehicle charging output Mode 3, 16 amps Charging station/vehicle communication protocol IEC61851 Charging station connection socket Type-3 in accordance with IEC62196, 7-pin, 16A Certification CE approved marking Compliant with standard IEC61851, Electric Vehicle Conductive Charging System (IEC 61851-1 and IEC61851-22) Compliant with standard IEC62196, plugs, socket-outlets and vehicle couplers - Electric Vehicle Conductive Charging System (IEC 62196-1 and IEC62196-2).

Features: Mode 3 / IEC 61851 / (VDE 0122) charging mode Low voltage assemblies IEC 61439-3 Respect of all European domestic safety requirement (IEC60364/VDE0100) Current rating: up to 16A single phase Operating temperatures: -25°C to +50°C following IEC61-439 & 62-439 Max Humidity of 95% non - condensing to above standards

Plug present detection & plug out safety mechanism as standard Power out re–start Detection of the end of charging by current threshold AC3 contactor with 2 million operating cycle

A Class Earth leakage protection supplied (local isolation point) Complies with 17th Edition Wiring Regulations

Mode 3: Dedicated and fixed circuit-socket

Specific connector

The electric vehicle is connected to the electric vehicle charging unit through a specific connector and dedicated circuit; protection functions are permanently installed and the facility for connection to a smart meter.



Charging cable Part Reference : Description : Length : Weight :

NCA01535 3KW 1P+N Type 1 5 metre 2.1 Kg

Protection from overheating: > Spring clamping > Large pins > Mechanical shutters - compliant with the 17th Edition Wiring Regulations The connection solution proposed by the EV Plug Alliance can be used on charging terminals up to 22 kW (32 A in three-phase) in complete safety. The cable complies with the IEC 61851-1 and IEC 62196-1/2 standards and the 17th Edition Wiring Regulations.

Residential charger & charging cable Part Reference : EVRESIKIT Order both products together and save money

For more information call 0870 608 8 608 or visit

The global specialist in energy managementTM

SE7644 APR 11

EVLink Residential Charger  
EVLink Residential Charger