Filling Station Catalog October 7, 2022

Car & Truck Custom Fit Covers

The Ultimate in All-weather Protection.

Colors: Gray or Taupe For outdoor or indoor use.

Covercraft Industries’ ultimate all-weather cover fabric, WeatherShield® has now been improved. WeatherShield®HP is the next generation of this exclusive high-preformance fabric, and technological advances have made it almost totally fade resistant. This Eco-friendly material is finished with the worldwide patented EPIC by Nextec® encapsulation technology to help shed moisture and harmful UV rays. It’s rated BEST for severe weather outdoor storage. This exclusive cover finish protects against dirt, tree sap, bird droppings and can assist against minor paint damage. It “breathes” to allow moisture and condensation to escape from under the cover, preventing surface damage and interior mildew.

• Dramatic rain dispersion - Fabric sheds water as soon as it hits the cover.

• Superior Dry Time - Because the fabric sheds moisture, just shake the cover and it dries in minutes.

• Breathable - Allows any heat or condensation under the cover to easily escape.

• UV Resistant - Special encapsulation formula additives reduce fabric UV degradation while helping to protect the vehicle’s finish and interior.

• Dust-proof - Patented fiber encapsulation process prevents dust from filtering through fabric.

• Superior Paint Finish Protection - Because of the silicone polymers used in the encapsulation process, the fabric’s silky smooth finish is actually less abrasive than flannel!

Form-Fit®

* Polyester knit with spandex added to the yarns

* Special Stretch Fabric Follows Vehicle Contours

* Inside is 100% Cotton Sheared to a Fleece Finish

* 4-year warranty

* High performance indoor fabric

* Super soft fabric pampers the paint, the chrome, anything the fabric touches!

• Packs Small - Cover packs into 1/3 to the volume of multi-layer, non-woven covers.

• Easy Care - Wash and dry at home,most covers will fit in your home washing machine, and unlike non-woven materials, you can dry it in your home dryer.

Vehicle Part # Price

Car CK-3 $619.00 ea.

Shortbed Truck CK-6 $629.00 ea.

Side Mirrors

Side mirror pockets are shipped loose for self assembly. You may mark your cover with the location of the side mirror pockets and return the cover to the factory for final assembly.

Longbed Truck CK-11 $729.00 ea.

Modification for accessory items (i.e. bumpers, mirrors, antennas, exterior visors, etc.) will be at additional cost.

Sedan Delivery and Station Wagons - Use the Shortbed Truck Price.

Available in:

-Black

-Charcoal

-Navy

-Silver

-Green

-Red

* Highly breathable fabric prevents vapor and heat from becoming trapped under the cover

* Ding and dent protection: Fabric construction helps provide protection from minor garage

* Machine washable - the best car cover is a clean cover, and this cover is easy maintain in most front load washer/dryers

* Includes a free matching storage bag with a drawstring

* Superior shape retention

* Outdoor or Indoor Use

* High performance woven fabric

Vehicle Part # Price

Car CK-2 $ 539.00 ea.

Shortbed Truck CK-5 $ 555.00 ea.

Longbed Truck CK-10 $ 655.00 ea.

Modification for accessory items: (i.e.bumpers, mirrors, antennas, exterior visors, etc.) will be at additional cost.

Sedan Delivery and Station Wagons - Use the Shortbed Truck Price.

More Performance at a Value Price

* Fade resistant: each fiber is a solid color; NOT surface dyed

* Strong fabric: double 150 denier yarns woven in both the machine and cross direction

* Luxurious soft finish glides over the vehicle finish

* HydroMax finish on both sides of the fabric helps protect against rain, bird droppings and dust, while maintaining the fabric’s breathability

* Excellent UV protection: ideal for use in areas subject to prolonged sun exposure

Car Cover Accessories

Deluxe Cable Lock Kit

Works on any brand of cover. Kit includes vinyl-coated steel cable, padlock, non-scratch plastic snap-together grommets and iron-on reinforcing patches. Part # CK-7......$14.95 ea.

Available in:

- Gray -Black

- Tan -Blue

Car CK-1 $385.00 ea.

Shortbed Truck CK-4 $645.00 ea.

Longbed Truck CK-9 $485.00 ea.

Vehicle Part # Price Modification for accessory items (i.e. bumpers, mirrors, antennas, exterior visors, etc.) will be at additional cost.

Sedan Delivery and Station Wagons - Use the ShortbedTruck Price.

Storage Bag

Polycotton duffel bag with drawstring helps keep cover neat and clean when not in use. Can be used with any style cover. Part # CK-8....$16.50 ea.

Hubcaps

Car Hubcaps

The hubcaps listed below are for Chevrolet only unless otherwise stated.

Car Hubcaps

GMC Pickup Hubcaps

Street Rod

Spare Tire Mounting Parts & Assemblies

Vinyl Tire Covers

Spare Wheel Carrier Parts

1929-33 Grommet, sidemount wheel carrier brace support-at-cowl panel. Heavy steel core, flexible neck. 1929-32: All Series

Series CA only (Passenger Eagle)

1933-35 Pad, wheel carrier, rear spare. Replaces P.O.A. #473830 for series CC, DC and EC (Phaeton, Coupe, Sport Roadster).

1934 Grommet, sidemount wheel carrier-through-fender. Replaces #376003-4. Right and left. Series DA (Passenger and Sedan Delivery, Master).

Bumper Guards

Bumper Guards - Passenger Cars

Bumper Guards - Trucks

Grille Guards

* Does not come with attaching bolt/hardware. See page 6 for hardware.

Bumper Bolts

1932 - Dave Semmens, Australia

Passenger Car Bumper Face Bars

Notes:

1. These bumpers are made with street rodders in mind. There are no holes and no grooves in the face bars. Stainless studs are on the back side for mounting giving the “smooth” look.

2. These bumpers are specially made for 1933-35 models and must be used with street rod braces RV-78 or RV-78SS.

3. Check outer bolt hole centers and specify 34” or 36” hole center.

4. 1933 front face bar is longer than original - Must be used with RV-22 bracket

Pickup Bumper Face Bars

Passenger Car Bumper Brackets

Notes: OS = Oversize item. Special freight charges will apply.

1. These bumpers are made with street rodders in mind. There are no holes and no grooves in the face bars. Stainless studs are on the back side for mounting giving the “smooth” look.

2. These braces are specially made for 1933-35 models and must be used with street rod bumper RV-77.

3. Moves bumper closer to the body.

4. Specify left or right.

5. Check outer bolt hole centers and specify 34” or 36” hole center.

Pickup Bumper Face Bars

Pickup Bumper Brackets

Car Front Bumper Grommets

1935 Grommet, front bumper. Replaces #379783-4, R & L. Series EA. Master models with knee action.

60-321..........................................$87.89 pr.

1936 Grommet, front bumper. Replaces #476481-2, right and left. All Master.

60-257...........................................$98.59 pr.

1937-38 Seal and grommet set, front bumper. Replaces #594596 and #4081663 for cars with beam axle front ends. Series GB and HB (Master passenger and Sedan Delivery). Seal or grommet pairs sold separately.

70-1103 (“horse shoe” seal).........$59.39 pr.

70-1104 (square grommet)..........$79.79 pr.

1937-38 Cars with beam axle - metal covers for front frame horn. These nice reproductions are a great replacement for those lost or bent covers.

GR-80 steel as original.........TEMP OUT

GR-81 chrome.......................TEMP OUT

1937-38 Grommet, front bumper. Replaces #595161-2 right and left, hollow back. Passenger Deluxe Master only.

60-142..........................................$82.39 pr.

1939 Grommet, front bumper, right and left. Replaces #350971-2, hollow construction as original. Perfect copy. All passenger.

60-80............................................$94.39 pr.

1940 Grommet, front bumper. Replaces #3654115. Perfect copy. Hollow construction as original. All passenger.

60-148..........................................$75.89 pr.

1941 Grommets, front bumper. Replaces #3658832. Exact reproduction. All passenger.

60-3...............................................$84.99 pr.

Car Rear Bumper Grommets

1933 Grommets, rear bumper. For Master Series Town Sedan ONLY. (Note: Left side shown, has clearance for tail light wire).

60-406...........................................$86.99 pr.

Car Rear Bumper Grommets

1935-36 Grommet, rear bumper, right and left, for round bumper support bracket; left hand grommet has clearance for electrical conduit.

1935: Master 1936: Standard

60-61...........................................$101.39 pr.

1937 Grommet, rear bumper curved for good fit. Replaces #594348. Beautiful reproduction in top quality rubber. All passenger.

60-143..........................................$77.99 pr.

1938-39 Grommet and seal, rear bumper. Replaces #597754. Excellent copy and material.

1938: All passenger & Sedan Delivery. 1939: Some models, see also 70-89.

60-18.............................................$83.29 pr.

1939 Grommets, rear bumper. Replaces #350670. Good fit, original construction. Some models. Also see 60-18.

70-89............................................$96.39 pr.

1940 Grommet, rear bumper. Replaces #3754109. Excellent copy. All passenger and SDL (KA, KB, KH).

60-168..........................................$76.59 pr.

Miscellaneous Car Bumper Fittings

1935-37 Pad, between bumper support bar and bumper face bar at the mounting bolts. Use as required (eight (8) for most). Replaces #5945838.

60-544.........................................$15.49 ea.

1941-48 Anti-squeak, rear gravel deflector-to-bumper. Replaces #3660389. Excellent copy of original extrusion. Six (6) foot strip. All passenger except station wagon.

CV-20..........................................$39.95 ea.

1942-55 Bumper, rubber, REAR bumper deflector. Replaces #3700014. All passenger models except Sedan Delivery and Station Wagon.

CV-146.........................................$11.95 pr.

Miscellaneous Car Bumper Fittings

1949-52 Pad, rubber, rear bumper bar, inner, to quarter panel. Replaces #3688663. Two (2) required per car. All models.

60-420.........................................$64.99 pr.

1949-55 Seal, rear bumper face bar-to-body gravelshield. Replaces #3695726, #3693314, #36705106, #3715221. 1-3/4” wide x 80” long with all original features. All passenger models.

CV-173.......................................$29.95 ea.

1956-58 Seal, rear bumper-to-body. Replaces #3720570. Approximately 60” long. All passenger cars.

CV-359......................................$29.95 ea.

1957 Seal, rear bumper face bar-to-body or gravels shield. Replaces #3736586. Exact profile. 3-5/8” wide x 59” long. All passenger cars.

60-213.........................................$50.29 ea.

1957 Bumper bullets, rubber, for front bumper. Bel Air Sport Coupe. This is a high quality reproduction, not a cheap import. Don’t be fooled by price! These will look good for a long time to come.

CV-345.......................................$43.50 pr.

1962-65 Seal, rear bumper to gravel shield or apron. Also called anti-squeak, rear apron to bumper. Full size models.

60-524.........................................$66.99 ea.

Truck Bumper Grommets

1939-46 Grommet, rear bumper. Replaces #599743-4, right & left.

1939-40: Commercial(JC,JD, JE,VA,VB,KC, KD,KE,KF,WA)

1941-46: All 1/2 Ton Commercial

60-127........................................$83.39 pr.

1941-46 Grommet, front bumper. Replaces #3658003.Perfect copy.

1941: All (except COE)

1942-46: All (except 1946-1 Ton)

60-45..........................................$86.59 pr.

Trunk Lids

Trunk & Rumble Seat Handles

Rumble Seat Step Pads

(os) - Oversize item - special freight charges apply.

Passenger Trunk Panels

These kits are precision cut to fit in place exactly, with no fasteners needed. The exact-cut size allows the panels to hold itself in place, by pressure alone. The panels come unfinished so you can cover the panels with vinyl, cloth or even carpeting to best suit your vehicle.

DC-588 1955-57 2- door Hardtop diecut as per original pattern - black - cardboard $32.95 ea. (os)

DC-589 4-door Hardtop and all Sedans diecut as per original pattern - black - cardboard

Trunk Rack Stainless

GR-262 (1929-36)

GR-410 (1929-38)

GR-417K (1930-32)

GR-417 (1930-32)

GR-665 (1930-35)

D-567 (1930-32)

FS-26 (6 inches) (1931-32)

GR-517 (1931-32)

D-10 (1931-32)

GR-537 1935-48

GR-56 (1937)

GR-416 (1931-32)

FS-27 (16 inches) (1931-32)

GR-92 (1937-40)

GR-61 (1938-39)

L-32 (1940-48)

Trunk Latches, Hinges & Supports

1929-32 Rumble Seat Cars rumble seat latch (for steel decklid models). Modify for wood frame

ea.

GR-517 Coupe/CBL rumble seat hinge bracespecify left or right $ 190.00 ea.

GR-410 Landau Phaeton & 5 Pass. Coupe trunklatch $ 69.50 ea.

GR-410 1933-34 Landau Phaeton & 5 Pass. Coupe trunklatch $ 69.50 ea. Coupe & Cabriolet trunk & rumble seat latch (for steel decklid models). Modify for wood frame lids.

1935-38 Master Coupe & Cabriolet with rumble seat

GR-262 1935 Coupe deck lid striker plate $ 32.50 ea.

1936 Sport Coupe & Cabriolet deck lid striker plate $ 32.50 ea.

BA-346 (1961-64)

GR-537 1935-48 Trunk hinge cupped washers set of 8 pcs $ 15.00 set.

GR-56 1937 Trunk hinges - sedans - chrome (will work on 1938 & 1939 also) $ 129.95 pr.

GR-61 1938-39 Trunk hinges - sedans - chrome $ 119.95 pr.

GR-92 1938-40 Passenger deck lid support detent spring $ 15.95 ea.

GR-159 1940 Convertible trunk lid supports - chrome TEMP. OUT

GR-158 Conv. trunk lid supports - zinc plated TEMP. OUT

L-32 Coupe - use as a replacement - design is different from original $ 95.00 pr.

1940-41 Convertible trunk hinges - chrome

1941-48 Coupe trunk hinges - chrome

GR-671 1941-47 Pass trunk support release spring $ 14.50 ea.

DC-12379 1955-57 Passenger trunk latch assembly $ 113.95 ea.

GR-168 1959-72 Passenger trunk lid latch $ 54.95 ea.

BA-322 1960-64 Pass. (except convertible) trunk springs $ 65.00 pr.

BA-375 1961-64 Pass. (except convertible) trunk hinges $ 84.95 pr.

BA-346 Convertible trunk hinges $ 139.95 pr.

BA-522 Conv. trunk springs/torsion bars $ 75.00 set * Fits all Sedans & Phaeton except Coach (2-door Sedan).

1961-64

Trunk Weatherstrip Kits

The following is a list of trunk (decklid) weatherstripping sets. The materials for making up these sets is listed in the previous section.

Please note that we offer two different kits in the 1951-54 models. One kit uses factory type molded corners as was original on these cars. We have found that these corners can be eliminated at a considerable savings. However, if you are doing a show quality restoration, the molded corners are correct and should be used.

Trunk/Rumble Seat Fittings

1926-37 Installation tool, door and trunk ferrule. For all GM cars and trucks using door and trunk handle ferrule (C-111 below). Without it ferrules are very difficult to install. Buy or rent this tool. You may return the tool, in good condition, and receive a refund of $30.00 if returned within 30 days of purchase. Include a copy of your original invoice to receive your refund.

C-662........................................$ 47.50 ea.

1926-37 Ferrule for 3/4” outside decklid handle.

Replaces #4003748. Chrome plated brass. All models. See 70-9 for grommet.

C-111..........................................$ 7.95 ea.

1926-37 Grommet for decklid handle ferrule (C-111, ordered separately). Molded rubber with cloth covering as original. All models.

70-9...........................................$ 10.39 ea.

1926-37 Gasket for C-111 ferrule. Will protect paint. Not original.

CV-641.............................................$ 1.00 ea.

1929-32 Rumble seat stop bumpers. GR-32.........................................$ 24.50 pr.

1929-35 Bumper, rumble seat lid, upper corners. 1929: Roadster, Cabriolet, Coupes

1930: Roadster, Sport Roadster, Coupes.

1931-32: Sport Roadster, Cabriolet, 5-pass. Coupe. 1933-35: Sport Roadster. 60-191.........................................$ 59.59 pr.

1930-32 Bumper, rumble seat lid, upper corners. 5/8” diameter x 3/4” overall length. Some rumble seat models. Compare with 60-191.

1931-32 Rumble seat pivot bolt.

GR-644......................................$19.50 ea.

1933-34 Pads, trunk hinge. Six (6) piece set. Sold in complete sets only. Replaces #4041217-18-19 for Town Sedan only.

60-604.........................................$61.89 set

1935-62 Plug, floor and rear compartment and body. For 3/4” sheet metal hole. Replaces #4805844. Up to twelve (12) required per vehicle.

CV-262.........................................$5.19 ea.

1935-75 Plug, body sheet metal hole. Used in various places like trunks or firewalls. For 1-1/2” holes. Many models.

C-863...........................................$5.95 ea.

1937-38 Bumper, rumble seat lid, upper corners. Original rounded triangle shape.

70-152.........................................$56.69 pr. 70-120........................................$ 48.19 pr.

1930-32 Bumper & stud, rumble seat lid. 1-1/8” diameter bumper with 5/16”-18 stud. All models with rumble seats. Not original - Replacement.

1930-34 Seal, Potter trunk lid. For accessory trunk that mounts on separate trunk rack. Sold by the foot as required. Most coupes and convertible models with small trunk.

70-231..........................................$7.29 ft.

1937-39 Mounting pad, decklid hinge. Replaces #40769912. Four (4) piece set. Town sedan and sport sedan.

CV-139.........................................$9.00 set

1937-39 Bumper, decklid. Replaces #4074032. Steel core, screw held. Two (2) per car. All coupes except sport coupe.

50-163........................................$77.89 pr.

Continued on next page

Trunk/Rumble Seat Fittings

1938-41 Grommet for decklid handle ferrule. Replaces #4082057.

70-177..........................................$11.79

1938-49 Ferrule, decklid handle. Chrome with rubber sleeve. Replaces #4082056. All models.

1938-40: All models

1949: All models

CV-389...........................................$5.95 ea.

1938-61 Bumper, decklid cap type for adjustable screw. 7/8” OD x 3/8” thick. Some models as required.

C-294............................................$1.00 ea.

1940 Mounting pad, decklid hinge. Four (4) piece set. Some models as required. Compare with C-318 below.

B-106............................................$8.75 set

1940 Bumper, decklid. Coupe and convertible models. Left and right for metal retainers.

GR-334.....................................$52.50 pr.

1950 Mounting gasket, trunk handle. Not an original part but works great to protect that new paint job. Two (2) piece set for all passenger models. TN-87.........................................$14.50 set

1951-54 Bumper, rubber for decklid. Self-retaining for 1/4” hole. Two (2) required per car.

CV-46...........................................$2.50 pr.

1951-69 Mounting gasket, trunk lock cylinder. Exact reproduction of #4587931. 7/8” I.D.

CV-641........................................$1.00 ea.

1955-57 Bumper, rubber for license plate frame to decklid. Some models as required.

33-349..........................................$2.95 ea.

1955-57 Bumper Kit - Four (4) piece set for all passenger models. This kit will do both the upper and lower bumpers in the trunk area.

AF-128.........................................$8.95 kit

1957 Bumper, rubber for tailgate. Twin retainer style 3/8” x 7/8” x 1/2” high. Station wagons except Nomads. Two (2) required per car.

Decklid Weatherstrip

1936 Weatherstrip, rumble seat lid, lower. Approximately 37” long. All models with rumble seats.

70-166..........................................$95.89 ea.

1/2” 7/8”

1937-39 Seal, decklid. Rectangular cross-section sponge. Most coupes and convertibles. Fits styles 1017, 1067, 1087, 1217. Measures 7/8” wide x 1/2” high.

TN-72.........................................$128.99 ea.

1937-39 Seal, decklid channel hollow. Most sedans where seal installs in channel of body. NOT for coupes where seal is usually mounted on lid. Original configuration. Fourteen (14) feet-six (6) inch strip. Fits 1011, 1019, 1211 and 1219 sedans.

1940-54 Weatherstrip, decklid on body. For 5/8” x 3/4” wide gutter. Superior, durable, fine grain black sponge. Measure gutter width for correct weatherstrip.

The following decklid hinge mounting pad sets are for 1941-48 passenger cars. Some 1940 cars use the same pads. Compare to B-106 above. Some sets are four (4) pieces, others are six (6) pieces as required.

C-318A 1942-48 Convertible..................TEMP. OUT

C-318B 1941-48 Sedan...........................TEMP. OUT

C-318C 1940-41 Conv’t & 1941-48 Coupe.....$9.95 set

C-318D 1942-48 Aerosedan....................TEMP. OUT

1941-48 Bumper, decklid opening on lid. Replaces #4114321. Metal core, as original. Two (2) required.

1941: All closed models except 1007.

1942-48: Style 1007 only.

34-399............................................$11.39 ea.

1941-59 Plug, trunk floor drain hole. Replaces #4124441. For 1/2” hole in sheet metal. Up to eight (8) required per car. Many models.

35-70..............................................$4.99 ea.

1942-48 Ferrule, decklid handle and license light body with rubber sleeve. All passenger models

60-526..........................................$24.59 ea. except Sedan Delivery and Station Wagon.

1949-50 Bumper, rubber for decklid. Replaces #4137121. Molded with clearance for screw. Passenger except station wagon and sedan delivery.

CV-203..........................................$2.50 pr.

C-292B........................................$2.50 pr.

1958-67 Bumper, rear compartment lid bumper support on lid. 15/16” OD, 5/16” thick. Fits 1/4” hole. All except sedan delivery and station wagon.

33-293...........................................$5.95 ea.

1959-60 Weatherstrip, tailgate opening. Pinchweld finish on body. For station wagons and El Camino.

70-1519.......................................$45.39 pr.

Decklid Weatherstrip

Note: Models prior to 1935 did not use decklid weatherstrip (except 1933 trunk sedans). These cars were designed to have water run down a channel and out of the car without weatherstripping

1933-36 Weatherstrip, decklid. Sponge rubber. 5/8” x 1/8” x 14’ (fourteen feet). For gutter in body.

1933: Trunk sedans

1935-36: All sedans

70-798.........................................$40.79 ea.

TN-43......................................... $49.69 ea.

1949-54 Weatherstrip, decklid. Used on lid, not body. Compare with 60-411. Uses approximately nine (9) feet per car.

70-463.........................................$10.39 ft.

1949-54 Weatherstrip, decklid. Used on lid, not body. Compare with 70-463 Uses approx. nine (9) feet per car. 60-411...........................................$9.59 ft.

1949-54 Weatherstrip, decklid in gutter. Molded wide corners to use with B-161 center section for across front of trunk opening. Molded corners made with each leg approx. 5-3/4” long. All passenger models.

60-511..........................................$93.79 pr.

1955-57 Weatherstrip, decklid. On lid. For all passenger models except station wagon. Molded with or without clips.

70-1123 with clips.......................$94.39 ea.

70-1122 without clips.................. $65.89 ea.

1957 Weatherstrip. Snap-in type for upper and lower tailgate on station wagons except Nomad. High quality sponge with inserted nylon clips. Measure length required. Use entire circumference lower gate and top and sides of upper gate.

CV-246B....................................... $3.95 ft.

1942-47 Weatherstrip, on body at rear of trunk. Thirty-six (36) inches long. Exact original profile made of top quality sponge. Replaces #4132274. For Fleetline fastback style 1007 only. 70-797......................................$133.69

1958-72 Weatherstrip, decklid in gutter of body. Extensively used in many body styles. Top grade, fine grain sponge. Note vertical configuration of sealing lip at top to make comparison with your original type.

C-346............................................. $4.50 ft.

1935-36 Seals, rumble seat lid, lower. Replaces #4059069. Three (3) piece set for lower edge and corners.

1935: Style 1057

1936: Styles 1057 and 1267 25-25........................................$131.49 set

1958-72 Weatherstrip, decklid. Used in gutter of body. Note “laid-over” configuration of sealing lip. Superior black closed cell sponge. Most body styles.

C-510.............................................$2.90 ft.

C-318A

C-318D

C-318B

C-318C

Crank Hole Covers

Truck Grille Support Panels

Chrome Bullets

These chrome plated bullets can be used for grilles, hubcaps, bumpers, or any other place your mind can imagine.Comes with center mounting stud.

Rivet Head Bolts

SA-229SS, SA-230SS 1937 Car & Truck

SA-231SS 1934-35 Truck

RW-872C (1954-55 Chevy Truck)

Quality Reproduction Parts for Chevrolet & GMC

SA-237B, SA-237C, SA-237R 1947-53 Truck

SA-232C 1939 Truck

SA-233C 1940 Truck

SA-234C, SA-234P 1941-46 Truck

SA-235C (1947-53 GMC)

RW-505 1955 Car

L-226 (1955-56 Chevy Truck)

DC-479 (1956 Car)

DC-478 (1955 Car)

DC-460, DC-460A (1957 Car)

Original Style Grilles

RW-652 (1957 Chevy Truck)

RW-653 (1958-59 Chevy Truck)

SA-237A

SA-237B

truck grille assemblyAll Chrome

truck grille - black - complete with black back bars

truck grille - chrome*complete with black back bars

SA-235C GMC truck grille assembly (does not include top “GMC” script bar) - chromewith cream color back bars

ea.(os)

RW-872C 1954-55 1st Series Chevrolet truck grille assembly - chrome* $1199.95 ea.(os)

* These grilles are production plated for “DRIVER” vehicles and are nice but not show quality.

(os) = Oversize item - special freight charges apply. Original Style Grilles Continued on Next Page...

Original Style Grilles

FS-421C Chevrolet truck inner grille - chrome $209.95 ea.

Street Rod Grilles

Aluminum Street Rod Grille Inserts

Finally, a great alternative to the laser-cut street rod grilles! These new aluminum street rod grille inserts are available in three different finishes and two different width bars. 3/8” spacing on grille bars is a more original look while the 1/4” spacing is more of a updated hot rod look. With the tighter 1/4” spacing, the radiator, fan and condenser are more hidden from view, while reducing air flow by only 7%.

Finish options are: Front Face Polish; Full Polish - Front & Sides; Chrome Plated over Aluminum. Choose the finish option you prefer. Choose the grille bar spacing you prefer. Get ready to have a great looking old Chevy!

Grille inserts are available in several different configurations. Specify when ordering:

1) Polished on Front Face Only with Satin Sides - 3/8” spacing between the bars of the insert

2) Full Polished - Front & Sides - 3/8” spacing between the bars of the insert

3) Polished on Front Face Only with Satin Sides - 1/4” spacing between the bars of the insert

4) Full Polished - Front & Sides - 1/4” spacing between the bars of the insert

AC-37 1937 Car

THESE ITEMS ARE THE INSERT ONLY. GRILLE SHELL IS NOT INCLUDED. Call for current lead time as all inserts are built to order. Inserts are oversized and subject to additional freight charges.

*These vehicles originally did not have a grille insert. This is for Street Rod applications only. INSERTS REQUIRE 1/2” OF SPACE from the backside of the grille shell to the front side of the radiator or condenser.

View Monthly Featured Customer Vehicles on www.FillingStation.com

Another Proud Owner

“This car has been rebuilt with Filling Station parts. I owned this same car back in 1963, between grade 10 and 11, I painted it blue with a brush. I traded it for a 1954 Pontiac Chieftan with a heater, winters are cold up here in Canada. I bought it back in 2010 and restored, it is just as much fun to drive as it was in 1963. Thanks for the parts and the help I received from your great staff.Keep em Rollin.

- Gary Steeves

AC-36 1936 Car

1929 - GARY STEEVES, CANADA

GR-497 1937-38 GMC grille vertical strip - aluminum -

strips on either side of the center.

Grille Parts

AF-313 1954 Car grille tooth - chrome - CENTER (GM# 3705313) $ 85.00 ea.

AF-310 Car grille tooth - chrome - OUTERRIGHT (GM# 3705310)

AF-311 Car grille tooth - chrome - INTERMEDIATE - LEFT (GM# 3705311)

AF-312 Car grille tooth - chrome - INTERMEDIATE - RIGHT (GM# 3705312)

(os) = Oversize item - special freight charges apply

Chevrolet Car & Truck Grille & Hood Emblem Decals

Part # Year(s) Model(s) & Notes Price

SA-78CR 1954

Hood/grille decals - chrome grillewhite letters-red background $12.95 set

SA-78WR Hood/grille decals-white grille - black letters - red background $12.00 set

SA-78CW 1955 1st Series Hood/grille decals - chrome grillewhite letters-white background $12.00 set

SA-78WW Hood/grille decals-white grille - black letters - white background $ 9.95 set

TR-77 1958-59 Truck grille decals - black letters $ 6.00 set

TR-77W Truck grille decals - white letters $ 6.00 set TR-78 1963-66

- black

letters decal (black) $ 20.00 kit

SA-68 1950 Passenger grille “Chevrolet” letters decal (blue) $ 20.00 kit

SA-59 1951 Passenger grille “Chevrolet” letters decal (black) $ 20.00 kit

TR-78 (1963-66)

SA-53 (1940)

SA-78CR (1954)

SA-78WR (1954)

SA-87 (1947-48)

SA-78WW (1955)

SA-77 (1941-46)

Grille Molding

Grille Upper & Lower Panels

Fastener Kits & Clip Sets

1953 - Patrick Marcum, LA

Passenger Car

Grille Emblems

Passenger Car

Chevy Trucks

Passenger Car Hood Ornaments & Inserts

Bullnose Moldings

This is a hood center molding that replaces the center hood strip and ornament for a clean look. Comes with mounting hardware, polished aluminum. This is not a stock application, street rods only. * Note! These moldings are oversize(OS)

Also see radiator ornaments on page 304

Truck Hood Ornaments

Truck Hood Emblems

Steel Hoods

Hood Hinge Support Rods

Hood Hold Down Brackets

Hood Brace Sponge Seals

TR-123

TR-243

(1934 Master)

Hood Hinges

Hood Hinge Bolts & Rivets

GM-1262 1940-41 Passenger hood hinge bolt, 5/16 x 1 (1/2” head) 3/8” shoulder

GM-1262

hood hinge bolt, 5/16 x 1 (1/2” head) 3/8” shoulder $ 4.50 ea.

GM-1263 Truck hood hinge bolt 5/16 x 1-1/4 (5/8” head) 7/16” shoulder - 4 required $ 4.50 ea.

TR-123 Truck hood hinge bolt set (6 bolts) - see GM-1262 & GM-1263 for Individuals $ 19.95 set

FS-800 1949-54 Passenger hood hinge bolt $ 8.00 ea. $29.50 set of four

$ 4.75 ea.

* Shipping tube charge of $8.00 in addition to freight charges apply.

Hood Springs & Prop Sets

Car Hood Insulation Kits

Car Hood Springs

Hood Spring Tools

NOTE: Buy or rent these tools. You may return the tools, in good condition and receive a refund of $30.00 - if returned within 30 days of purchase. Include a copy of your invoice to receive your refund.

Truck Hood Hinge Springs Hood Prop Sets

Hood Trim & Molding

Rivet Head Bolts

Hood Trim Clips

Car Hood Bars

Hood Latches

Hood Parts

TR-446 1947-55 1st Series

RW-808 1977-80

60-35

Car Hood Bumpers & Anti-Squeak

1935-36 Bumpers, hood front corners. Replaces #378151-2. Right and left with metal cores.

1949-52 Anti-squeak, hood ledge at cowl. Replaces #3689070. Two (2) 21 inch pieces. All passenger models.

RW-392

1925-31 Bumper, hood latch bracket, rubber. Replaces #361490. All models.

RW-392 1925-28 All....................$ 4.75 ea.

60-35 1929-31......................... $10.89 ea.

1929-31 Bumper stop, hood, lower center. Replaces #356743. Two (2) required per car. All models.

60-34.............................................$2.50 ea.

1929-31 Hood Bumper stop. These bumpers mount in the center of the hood, facing outward and mounted on the flange of the front fender

GR-237.......................................$24.95 set

1933 Pads, hood corners, right and left. Replaces #371441-2 for all 4 corners. Metal core as original. Four (4) piece set. All passenger cars.

60-42........................................$108.19 set

1934 Pads, hood front covers. Replaces #373689-90 right and left. Metal core as original with metal tabs for securing to hood. Series DA (Master) only.

60-52..........................................$77.99 pr.

1934-35 Pads, hood rear corners. Replaces #373687-8 r. and l. Metal core as original. With metal tabs for securing to hood.

1934: Ser. DA, DC (Master & Standard)

1935: Ser. EC (Standard)

60-53...........................................$96.29 pr.

1935 Master, 1936 All Passenger.

60-399.........................................$100.69 pr.

1937 Anti-squeak, hood-toradiator ledge, top. Replaces #595809-10, right and left. All passenger including Sedan Delivery.

60-110..........................................$82.39 pr.

1937 Anti-squeak, hood-to-radiator ledge, sides. Replaces #594777-8. Right and left, self retaining. All passenger including Sedan Delivery. 60-111.........................................$63.79 pr.

TN-12.........................................$15.95 pr.

1949-54 Seal, hood to radiator. One (1) piece. All passenger models.

TN-91........................$14.50 ea.

1953 Anti-squeak, hood to cowl. One (1) piece. All passenger models.

TN-58........................$11.50 ea.

TN-91

1954 Anti-squeak, hood to cowl. One (1) piece. All passenger models.

TN-68.....................$19.95 ea. 47” Strip

1955-56 & 1958-60 Anti-squeak, hood to cowl with clips Replaces #4650471. All passenger models.

TN-64................$11.95 pr.

1957 Anti-squeak, hood to cowl with clips. Replaces #4688447. All passenger cars.

CV-346.............$16.00 pr.

1938 Anti-squeak, radiator hood ledge. Replaces #597562. Four (4) carrot retainers as original. Superior copy. Two (2) per car. All passenger models. 60-11............................................$75.89 pr.

1940-41 Anti-squeak, hood to cowl. Replaces #3654168. 5/8” x 7/32”. One eight (8) foot strip per car. All models.

CV-56..........................................$28.95 ea.

60-91

1958 Anti-squeak, hood to radiator. All passenger cars with factory air.

60-670.........................................$47.29 ea.

1961-62 Anti-squeak, hood to cowl. All passenger cars.

TN-115........................................$10.50 pr.

1963-64 Anti-squeak, hood to cowl. All passenger cars.

TN-116........................................$10.50 pr.

60-90

1942-48 Anti-squeak, hood ledge at cowl. Replaces #3664008. One pair required per car. All passenger. 60-90...........................................$49.99 pr.

1942-48 Seal, side of hood ledge at cowl. Replaces #3663805. Molded with all original details. One pair required per car. Made in the USA.

60-91...........................................$83.29 pr.

1942-48 Seal, side of hood ledge at cowl. Replaces #3663805. Imported.

CV-91..........................................$24.50 pr.

Hood Corners, universal type made with leather. Not an original item but can be used on any vehicle. Comes with two (2) rivets.

VT-11...........................................$12.50 pr.

1935-36 Pad, hood, rear corner. Replaces #378078. Steel core and tabs. Excellent copy. All passenger models including Sedan Delivery.

1935: Requires two (2) per car.

1936: Requires four (4) per car. 60-6...............................................$19.59 ea.

1925 - Bill Rausch, MI

1929-32 Bumper, hood end. Set of four (4) bumpers for all passenger cars and trucks.

GR-305.........................................$16.95 set

1938-42 Pad, hood-to-grille. Up to ten (10) required per car. All passenger cars.

C-136..............................................$2.50 pr.

1938-61 Bumper, hood rest, cap type for adjustable screw. 7/8” O.D., 3/8” thick. Many models as required.

C-294...............................................$1.00 ea.

1940 Bumper, hood side panel.

Replaces #3653960. 15/32”

diameter x 9/32” thick head.

Fits 1/4” hole in sheet metal.

All passenger cars.

33-449.............................................$3.99 ea.

1942-48 Bumper, hood panel to fender. Replaces #3664645, #37542359. Fits 1/4” hole in sheet metal. Up to ten (10) required per car. All passenger models.

PO-3................................................$2.00 pr.

Car Hood Bumpers

1940-52 Bumper, hood front in grille. Replaces #3655015. 3/4” diameter x 5/16” thick. Self-retaining for 1/4” hole in sheet metal. Two (2) required per car. All models.

CV-46............................................$2.50 pr.

1949-52 Pad, hood rest, front, to radiator header bar (top of grille). Replaces #3689084. 3/4” diameter, 1/2” thick. All models.

CV-123..........................................$2.50 pr.

1949-54 Bumper, hood panel to fender. Replaces #3688811. 5/8” O.D. Fits 1/4” hole. Eight (8) required. All passenger models.

PO-B..............................................$2.00 pr.

1949-55 Bumper, rubber, for rear hood corners on cowl. Replaces #4137121. Molded with clearance for screw. Two (2) per car. All passenger cars.

CV-203..........................................$2.50 pr.

1953-54 Hood to grille bumper. Fits 3/8” hole, 1” dia., 1/8” tall.

CV-267......................$5.95 pr.

1955 Bumper, hood rest. Replaces #3710575. Self-retained in slot on fender. Six (6) per car. Sold in sets of six (6). All passenger models.

DC-225..........................................$6.95 set

1955-64 Bumper, hood front, adjustable. All passenger cars. 5/16”-18 x 1-3/4” stud. (See C-294 for rubber cap only.)

50-205............................................$4.25 ea.

1956-57 Bumper, hood sideto-fender, stem retainer type. Replaces #3722236. As required. All passenger models.

CV-318.........................................$10.95 pr.

1958-64 Bumper, hood to fender ledge. 4 per car. For all full size Chevrolets. Sold in sets of 4 bumpers.

CV-542

70-2127 1958 Passenger.............$21.69 pr.

CV-275 1959-61 Full Size............$5.00 pr.

60-696 1962 Full Size...............$19.99 set

CV-542 1963 Full Size.................$4.25 set

60-675 1964 Full Size...............$19.99 set

Car All-In-One Hood Bumper Kits

Car Hood Lace

Hood Lace - without wire 5/8” x 1/8”. Flat type - used in 1928 and earlier.

FS-955...................................$2.00 ft.

Hood Lace - without wire. 5/8” x 3/16”.

Channel type.

FS-118...................................$2.00

Hoodlace with wire insert. Fabric 48” long with 52” wire insert..

FS-285 (48” fabric).......$19.50 ea. or $35.00 pr.

1929-39 Hood Lace Hooks for hood lace with wire insert.

All passenger cars

kit

1940-54 Retainer clips and screw set for rubber hood-to-cowl seal. Sixteen (16) pieces.

DS-106R....................$4.95 set

Split Rivet - 5/16” head for 5/32” hole. For use with hoodlace without wire.

FS-11683 .........$0.25 ea. Ten or more.....$0.20 ea.

CV-275

FS-955

Truck Hood Lace

1940-55 1st Series Retainer clips and screw set for rubber hood-to-cowl seal. Sixteen (16) pieces. DS-106R...................................................$4.95 set

Hood Lace - without wire 5/8” x 1/8” Flat type - used in 1928 and earlier.

FS-955...................................$2.00 ft.

Hood Lace - without wire. 5/8” x 3/16”. Channel type.

FS-118...................................$2.00 ft.

FS-11683 ................................$0.25 ea. Ten or more............................$0.20 ea.

Split Rivet - 5/16” head for 5/32” hole. For use with hoodlace without wire. AF-277.................................$9.50 pr.

Hoodlace with wire insert. Fabric 48”long with 52” wire insert.

FS-285 (48” fabric)..............................$19.50 ea.

Truck All-In-One Hood Bumper Kits

1929-39 Hood Lace Hooks for hood lace with wire insert. CD-11K

Truck Hood Bumpers & Seals

1929-32 Hood - lower center

60-34..............................................$2.50 ea.

1929-32 Hoodlatch bracket

60-35............................................$10.89 ea.

1929-32 Hood Bumper stop. These bumpers mount in the center of the hood.

GR-237........................................$ 24.95 set

1929-33 Hood end panel bumper.Set of four.

GR-305....................................$ 16.95 set

1937 Bumper, hood to radiator. Replaces #595304. Six (6) per vehicle. All commercial models.(GC, GD, GE, S) 33-482...........................................$6.99 ea.

1937-46 Pad, hood corner, steel core as original, front & rear.

1937-38: Pickups & Panels, Front

1939-46: Pickups & Panels, Rear 60-118..........................................$70.39 pr.

1940-46 Anti-squeak, hood to cowl. Replaces #3654168. 5/8” x 7/32”. One 8 ft. strip per vehicle. (See also FS-118 & FS-285 above)

1940: All Commercial

1940-46: All

CV-56.......................................$28.95 ea.

1941-42 Bumper, hood side panel. Replaces #3653960. 1/2” diameter for 1/4” hole in sheet metal.

C-136........................................$ 2.50 pr.

1947-55 1st Series Anti-squeak, hood to cowl. 66” strip

CV-138....................................$ 10.95 ea.

1947-55 (1st series) Bumper, hood to grille. Replaces #3689084.

CV-123......................................$ 2.50 pr.

1947-59 Bumper, hood to fender, for 1/4” hole. Replaces #3742359. Up to 8 per vehicle.

33-459......................................$ 4.69 ea.

1947-59 Bumper, hood to grille. Replaces #3690047. 3/4” diameter x 5/16” thick. Fits 1/4” hole.

CV-46.........................................$ 2.50 pr.

1960-66 Truck - hood to radiator

CV-542K

TR-488 (1955-58)

TR-137 (1955)

TR-99 (1957)

TR-75 (1961)

CM-9225 (1962)

CM-9275 (1963)

TR-100 (1957)

CM-9325 (1964)

CM-9350 (1965)

CM-9375 (1966)

TR-428 (1956)

TR-138 (1957)

CM-9105 (1960)

FS-557 (1967-68)

CM-9526 (1967-68)

CM-9550 (1967-68)

CM-9555 (1968)

CM-9830 (1968-72)

FS-553 (1969-70)

Truck Nameplates

CM-9610 (1969-70)

See Glovebox section for Glovebox door nameplates.

emblem $ 46.95 ea.

CM-9555 1968 Chevrolet “CST” door emblem (also fits 1969-72 Blazer) $ 52.95 pr.

CM-9821 1968-72 GMC “1500 V-EIGHT” front fender emblem $ 69.95 pr.

CM-9830 GMC “2500 V-EIGHT” front fender emblem $ 69.95 pr.

CM-9840 GMC “4 WHEEL DRIVE” front fender emblem (also fits Blazer & Suburban) $ 55.00 pr.

CM-9610 1969-70 Chevrolet “CST/10” front fender emblem $ 49.95 pr.

FS-553 Chevrolet “C/10” front fender emblem. $ 39.95 pr.

Continued on next page....

CM-9105 (1960)

FS-557 (1967-68) CM-9526 (1967-68)

CM-9275 (1963)

CM-9325 (1964)

CM-9225 (1962)

TR-138 (1957)

Truck Nameplates

“GMC 2500 Sierra Grande” front fender emblem $ 69.95 pr.

CM-9835 “GMC Jimmy” front fender emblem $ 69.95 pr.

TR-565 1973-74 Chevy Truck/Blazer “Custom Deluxe” dash emblem $ 29.95 ea.

TR-566 Chevrolet “Cheyenne” dash emblem $ 29.95 ea.

TR-582 Chevrolet “Cheyenne Super” dash emblem $ 29.95 ea.

CM-9775 1973-76 Chevrolet “Cheyenne Super 10” front fender emblem $118.07 pr.

TR-567 1975-80 Chevy Truck/Blazer “Silverado” dash emblem $ 29.95 ea.

TR-583 Chevrolet “Cheyenne” dash emblem $ 29.95 ea.

TR-584 Chevrolet “Scottsdale” dash emblem $ 29.95 ea.

CM-9827 1981-87 Chevrolet truck, Blazer, Suburban tailgate emblem $ 59.95 ea.

TR-576 Chevrolet truck, Blazer, Suburban “Silverado” dash emblem $ 22.50

Passenger Nameplates & Emblems

1925-1954

1954-1957

chrome - with clips $ 19.95 ea.

BA-35 “Chevrolet” script on trunk - chrome (uses 4 ea. FS-2100 clips) $ 27.50 ea.

L-3 1955 “V” emblem below tail light $ 54.95 pr. CM-1022 Hood emblem assembly - chrome with plastic insert - all passenger $ 79.95 ea.

CM-1020 Hood & trunk emblem plastic insertall passenger $ 42.95 ea.

CM-1024 Trunk emblem assembly - chrome with plastic insert - all passenger $ 82.95 ea.

L-82 1955-56 “BEL AIR” gold emblem for radio speaker screen, Bel Air & Nomad $ 12.95 ea.

RW-123 “CHEVROLET” script for clock housing, 150 & 210 series - chrome $ 17.95 ea.

FS-906 “CHEVROLET” script on fender or rear quarter - 150 & 210 series - chrome $ 49.95 ea.

L-183 “BEL AIR” script on rear quarter panel - chrome $ 36.95 pr.

FS-2596 Passenger script & crest barrel clip $ 0.99 ea.

TR-159-G 1955-57 Rear quarter crests - gold $ 66.95 pr.

TR-159-C Rear quarter crests - chrome $ 66.95 pr.

DC-948 “NOMAD” tailgate script $ 27.50 ea.

J-16 1956 “V” emblem on front of hood 150 & 210 series with V-8 - chrome $ 57.95 ea.

J-17 Trunk “V” emblem - chrome $ 49.95 ea.

CM-1392 Hood emblem assembly - chrome with plastic insert - 6 cylinder cars only $124.95 ea.

CM-1390

Hood emblem plastic insert - 6 cyl. cars only $ 46.95 ea.

CM-1304 Hood emblem assembly - chrome with plastic insert - V-8 cars only $ 64.95

Nameplates & Emblems continued on the next page...

Passenger Nameplates & Emblems

1956-1957

CM-1394 Trunk emblem assembly - chrome with plastic insert - 6 cyl. cars & wagon - 7”

CM-1306 Trunk emblem assembly - chrome with plastic insert - V-8. cars only

CM-1302 Trunk emblem plastic insert - V-8 cars only

CM-1020 1956-57 Trunk emblem plastic insert - 6 cyl. 150 & 210 series. Also 1957 Bel Air

DC-573 1957 Bel Air aluminum side panel inserts (2-door HT, 2-door sedan, convertible, Nomad) comes with “Bel Air” scripts and crests.

DC-573A Bel Air aluminum side panel inserts (4-door HT only) w/”Bel Air” scripts & crests

DC-573B Bel Air aluminum side panel inserts (4-door sedan) w/”Bel Air” scripts & crests

DC-541 Bel Air “CHEVROLET” script (13”) on hood & trunk (V-8 models) - gold

RW-125 “CHEVROLET” dash panel script $ 17.95 ea.

DC-541A 210 & 150 V8 models script (13”) on hood, trunk and side - chrome

DC-541B 150 & 210 6 cyl models “chevrolet” script - 15” hood & trunk - chrome

DC-590 “V” emblem on front of hood for all Bel Air models with V-8 (gold)

L-78 “V” emblem on front of hood for all 150 & 210 models with V-8 (chrome)

ea.

L-80 “V” emblem on trunk for all 150 & 210 models (chrome) $ 69.50 ea.

DC-539 “Bel Air” script on rear quarter panel - gold $ 81.95 pr.

L-81 “Bel Air” dash panel script $ 23.95 ea.

DC-592 “V” emblem on trunk for all Bel Air models (gold) $ 89.95 ea.

DC-591 Continental kit “V” emblem (gold) for all models with this accessory $ 49.95 ea.

DC-591 Nomad “V” emblem (gold)

CM-1450 Fuel injection front fender crossed flag emblems $ 77.95 pr.

FS-975 Bel Air & 210 front fender “Fuel Injection” script

CM-1394 Trunk emblem assembly - chrome with insert - 6 cyl. 150 & 210 series including wagon - 7” long

1957-1960

69.95

- 6 cyl. cars only $ 42.95 ea.

CM-2022 “Chevrolet” script on trunk $ 31.95 ea.

DC-591A Continental kit “V” emblem - chrome $ 25.00 ea.

CM-2025 1958-60 Impala rear speaker emblem $ 48.84 ea.

CM-2022 1959 Continental kit “Chevrolet” script $ 31.95 ea.

J-19 Hood “V” emblem - chrome $ 54.95 ea.

J-21 Hood “Chevrolet” script - chrome $ 59.95 ea.

CM-2028 Hood emblem - crossed flags & V - 348 cu. in. engine $125.95 ea.

CM-2040 Rear quarter letters - “IMPALA” (set) $ 49.95 set

CM-2045 Rear quarter emblem - crossed flags with gold finish - Impala only $109.95 pr.

CM-2049 Trunk emblem plastic insert $ 68.95 ea.

CM-4810 El Camino front fender emblem $132.00 pr.

CM-4800 El Camino tailgate emblem - plastic insert $ 73.26 ea.

TR-227 1960 El Camino front fender emblem $ 67.50 pr.

CM-1306 Trunk emblem assembly - chrome with plastic insert - 6 cyl. cars only $ 64.95 ea.

CM-1302 Trunk emblem plastic insert - 6 cyl. cars only $ 32.95 ea.

CM-2091 Trunk emblem assembly - chrome with plastic insert - 283 cu. in. engine only $ 99.95 ea.

CM-2090 Trunk emblem plastic insert283 cu. in. engine only $ 56.95 ea.

Nameplates & Emblems continued on the next page >

Passenger Nameplates & Emblems

1960-1963

RW-969

1962-1964

passenger $ 99.95 ea.

CM-2200 Hood emblem plastic insert - all passenger $ 46.95 ea.

CM-3016 Front fender emblems “6” - 6 cylinder only - Black (will fit 1962-64 Nova) $ 73.95 ea.

CM-3018 Front fender emblems “6” - 6 cylinder only - Red (will fit 1962-64 Nova) $ 73.95 ea.

CM-2295 Impala “SS” console emblem $ 51.95 ea.

CM-2296 Impala “SS”

ea.

TR-192 Front fender “V” emblem for 283 cu. in. engines $ 41.95 pr.

TR-193 Front fender V with flags emblem for High Performance models $ 32.95 pr.

CM-2326 Front fender emblem “409” $ 38.95 pr.

CM-2395 Impala “SS” console emblem $ 37.95 ea.

CM-2198 Impala SS door panel reflector assembly $ 41.95 ea.

CM-2399 Impala “SS” door panel emblems $ 69.95 pr.

passenger $129.95

1929-48 Passenger Car Cowl & Rear Quarter Repair Panels

1929-32 Passenger Car Floor Repair Panels

AF-180 (1931-32)

GR-310 Left (1940)

GR-327 Left (1940)

GR-344 Right 1941-48

GR-345 Right (1941-48)

GR-407 1942-48

1927-1948 Passenger Rocker Panels

Coupe inner rocker panel $ 46.50 ea.*

GR-345 1941-48 Rocker panel (includes outer, inner and top plate) specify Left or Right $ 195.00 ea.*

GR-346F Body support brace - frontspecify left or right $ 95.50 ea.

GR-346C Body support brace - center - fits L/R $ 95.50 ea.

GR-346R Body support brace - rear - fits L/R $ 95.50 ea.

GR-344 Rocker panel kit - includes 1 ea. of GR345, GR-346F, GR-346C, GR-346R, Kit does one side. SAVE nearly $70.00 off individual prices!

$ 365.00 kit* (os)

GR-406 4-door sedan rocker extension (use with GR-345 for complete panel) $ 106.00 ea.* (os)

GR-407 1942-48 Rocker panel front extension (foot scraper) “smoothie” $ 99.00 ea.* (os)

* SPECIFY RIGHT OR LEFT WHEN ORDERING.

1929 - 48 Passenger Car Door Area Repair Panels

GR-344 End View

GR-329

GR-135,

1929-48 Trunk & Rumble Seat Panels

pan) (Made in USA) $ 356.50 ea.(os)

GR-349 Coupe & Sedan - inner trunk floor extension (behind lower outer trunk panel) $ 322.00 ea.(os)

GR-298 1940 Coupe - lower trunk (tail pan) (Made in USA) $ 356.50 ea.(os)

GR-299 Sedan - lower trunk (tail pan) (Made in USA) $ 356.50 ea.(os)

GR-133 Coupe & Sedan - inner trunk floor extension (behind lower outer trunk panel) $ 322.00 ea.(os)

GR-420 Coupe & Sedan trunk floor panel kit (3 panels) $ 269.00 kit(os)

- lower outer trunk repair panel (tail pan)

1937 Sedan - trunk floor panel kit - 9 pcs.

1937 Master Deluxe rear bumper gravel deflector - steel

ea.(os)

ea.(os) GR-147 Sedans w/o trunk - lower trunk panel (tail pan). No weatherstrip lip.

GR-306 1941-48 All Passenger - lower trunk roll panel (street rod type) “smoothie” (tail pan) $ 356.50 ea.(os)*

742201 All Passenger - trunk floor panel kit (3 panels) eliminates spare tire well $ 407.00 kit(os)*

726-29 All Passenger - spare tire well $ 172.50 ea.(os)*

742270 All Passenger - rear gravel pan - single bead - 16 gauge steel $ 192.50 ea.(os)*

GR-462 Coupe & Sedan - inner trunk floor extension (behind lower outer trunk panel) $ 173.00 ea.(os)

*Note: These panels are made for street rod applications and will not necessarily look like original panels (os) - Oversize item - special freight charges apply.

GR-133 (1940)

GR-306

GR-298 (1940)

GR-147 (1936)

GR-530 (1931-32)

GR-524 (1929-30)

GR-137 (1939)

(1935)

GR-420 (1940)

Sheet Metal Repair Panels

1949-52 Passenger

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. Shipped by truck - special freight charges apply.

apply.

Sheet Metal Repair Panels

1953-54 Passenger

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. Shipped by truck - special freight charges apply.

* Item is not shown

(os) - Oversize item - special freight charges apply.

1927 - DARRYL COOPER , AUSTRALIA

Sheet Metal Repair Panels

1955-56 Passenger

(os) - Oversize item - special freight charges apply.

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING.

* Item is not shown Shipped by truck - special freight charges apply.

Sheet Metal Repair Panels

1955-56 Passenger Continued...

1955-56 Passenger Continued...

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. *

on next page...

Sheet Metal Repair Panels

1955-56 Passenger Continued..

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown Shipped by truck - special freight charges apply.

Difference between FULL QUARTER PANEL and QUARTER PANEL SKINS: Full factory style quarter panels include door jam opening, trunk opening and part of the roof line (sail panel). Quarter panel skins are the outer skin covering the entire side of the quarter from the door edge to the tail panel. Most roll over the top edge about 1” toward the trunk and sail panel area. The skins are nice reproductions and when professionally installed are an excellent method of repairing major rust and damage.

1955-57 Passenger

AF-165 Frame rail skid plates - Convertible - duplicates of the original feature “U” shaped channel construction and stock profiles and contours. Heavy gauge sheet metal. Specify left or right.

AF-166 Arm rests - Chevy 2-door hardtop. Exact duplicates of the original. Heavy gauge sheet metal

“X” frame - Convt. - duplication of the original, includes all brackets. Painted in primer black.

pr.*

727-50L Left

727-24

727-37L Left

727-76

727-45S Left

727-76F

Sheet Metal Repair Panels

1957 Passenger

1957 Passenger

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown

Shipped by truck - special freight charges apply.

(os) - Oversize item - special freight charges apply.

Sheet Metal Repair Panels

1957 Passenger Continued...

Difference between FULL QUARTER PANEL and QUARTER PANEL SKINS: Full factory style quarter panels include door jam opening, trunk opening and part of the roof line (sail panel). Quarter panel skins are the outer skin covering the entire side of the quarter from the door edge to the tail panel. Most roll over the top edge about 1” toward the trunk and sail panel area. The skins are nice reproductions and when professionally installed are an excellent method of repairing major rust and damage.

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown Shipped by truck - special freight charges apply.

1957 - Niles Stephenson, OK

Complete kits include individually labeled component kits for each application. Each kit has stainless bolts for: Arm Rests, Body Mounting, Bumpers & Brackets, Door Hinges, Door Latches, Door Sills, Firewalls (Battery Box, etc.), Front Sheet Metal, Glove Box, Headlight Mounting, Hood Hinges, Hood Latch & Catch, Hood Assembly, Misc. Interior Trim, Lens Screws, Radiator Support, Steering Box & Column, Trunk Hinges, Trunk Latch, Window Trim.

Tools

Use on C-111 ferrules. Buy or

Sheet Metal Repair Panels

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown Shipped by truck - special freight charges apply.

1959-60 Passenger

Sheet Metal Repair Panels

1961-64 Passenger

Difference between FULL QUARTER PANEL and QUARTER PANEL SKINS Full factory style quarter panels include door jam opening, trunk opening and part of the roof line (sail panel). Quarter panel skins are the outer skin covering the entire side of the quarter from the door edge to the tail panel. Most roll over the top edge about 1” toward the trunk and sail panel area. The skins are nice reproductions and when professionally installed are an excellent method of repairing major rust and damage.

1961-64 Passenger

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown (os) Oversize - addt’l. freight Shipped by

Door Sill Plates

* Hand-made, show quality. If out of stock lead time may be 9 months

@ - Also fits 1949-50 Oldsmobile Series 88 & 1949-52 Pontiac.

Sill Plate Screws - Stainless Steel

Passenger Car Body Mounting Pad Kits

Body Mounting Bolt Kits

Shok-Liner® Rubber Body Webbing

$45.00 roll

GR-555 - 1/8” thick x 2” wide-25 foot roll. State-of-the-art answer to cushioning between the body and frame. Also great between any metal-to-metal mounting applications like fenders, running boards, braces, panels, and gas tanks. This specially designed rubber extrusion can be multi-layered for a wide range of custom thicknesses. Shok-Liner comes ready to cut and install with peel-n-stick adhesive backing so it stays in place during final mounting adjustments. Interlocking surface grooves match those on the Shok-Shims (GR-553) for perfect compatibility.

GR-553F - Variety Pak - 50 pieces............................................. $ 62.50 per.pkg 10 of each: 1/8”, 3/16”, 1/4”, 5/16”, 3/8

Shok-Shims® Body Mounting Pads

The most versatile, effective body-mount cushions made. Designed in various thicknesses to be combined to fit any size gap. Perfect for stacking, offering a wide range of custom thicknesses while easy to slit for placement around pre-installed bolts. Flexible enough to expand for bolts up to 5/8” diameter and great for controlling vibrations on machines or equipment. Interlocking surface grooves match those on the Shok-Liner (GR-555) for perfect compatibility.

RW-85 (1961-64)

RW-86 (1961-64)

FS-701

GR-553F

GR-513 (1927-35)

TN-128 (1955-57)

Firewall Kickboards

Replace that dried-up, torn or missing street rod firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a “stretched” piece of cardboard that fits poorly. Insulators are shipped ready to install - no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece. Please note that most items are oversize and require special freight charges.

Passenger Cars

Part # Year(s) Price

TC-P2930 1929-30 (Note 1) $213.90 ea.

TC-P31 1931 (Note 2) $213.90 ea.

TC-P32 1932 (Note 2) $213.90 ea.

TC-P33M 1933 Master $282.89 ea.*

TC-P34M 1934 Master $282.89 ea.*

TC-P34S 1934 Std. $201.25 ea.*

TC-P3536S 1935-36 Std. $313.95 ea.*

TC-P3536M 1935-36 Master $313.95 ea.*

TC-6 1937-38 $294.39 ea.*

TC-7 1939 $294.39 ea.*

TC-P4041 1940-41 $294.39 ea.*

TC-P4247 1942-47 $294.39 ea.*

Notes: (1) Rubber - not original. (2) Rubber

Passenger Cars

Chevrolet & GMC Trucks

Part # Year(s) Notes Price

TC-8 1937-46 $189.00 ea.*

TC-1 1947-53 Truck $189.00 ea.*

TC-13 1954-55 1st Series Truck $189.00 ea.*

TC-2 1955-59 2nd Series $169.00 ea.*

TC-P5960 1959-60 El Camino $335.80 ea.*

TC-3 1960-63 $261.05 ea.*

TC-4 1964-66 $261.05 ea.*

TC-5 1967-72 Specify 1/2 or 3/4 ton $261.05 ea.*

TC-T7379 1973-79 Chevy truck $261.05 ea.*

TC-T8087 1980-87 Chevy truck $261.05 ea.*

Firewall Kickboard Retaining Clips

Kick Panels - Cars & Trucks

These panels are die cut for good looks and easy installation. The kickboard area is often overlooked in many restorations. Finish yours off with that final detail. Sold in pairs only. Note: Cardboard kick panels are painted on the front only. We recommend that you seal the back side with paint to keep out moisture. All kick panels are cardboard unless otherwise noted.

GR-459 1935-36

GR-423 1928-36 GR-458 1935-36

All GR-419 1940

in this section are oversizespecial freight charges apply. GR-420 1940

Street Rod Floor Board Repair Panel Kits

All items in this section are oversize - special freight charges apply. Street Rod Floor Board Repair Panel Kits continued on next page....

Street Rod Floor Board Repair Panel Kits

Street Rod Transmission Covers

1951 - Dave Surmon,Or

1947-55

All firewalls in this section are oversize - special freight charges apply.

Street Rod Firewalls

Passenger Cars

1927-60 Grommet, electric wire through firewall. 7/16” ID. for 11/16” hole.

Replaces #117961.

32-47...........................................$2.40 ea.

1929-32 Grommet. Electro-lock through firewall. For 1 - 11/16” Hole

GR-186.......................................$5.95 ea.

1929-39 Grommet. Vacuum line through firewall. Replaces #379082. Fits 3/4” hole in sheet metal.

1935 Master Deluxe (EA, ED).

1936-39 All models.

32-64..........................................$5.39 ea.

Trucks

All firewalls in this section are oversize - special freight charges apply

Car Firewall Grommets

1932-39 Grommet, firewall, oblong style. Replaces #3681071. Fits steel retainer for throttle and choke cables, oil and temperature lines. 7/16” x 1-1/8” x 3-7/8”. All models.

RW-268 1932 (5-hole).............$11.50 ea. 60-10 1933-39 (4-hole)........$31.89 ea.

1933-46 Grommet. Ignition switch conduit through firewall. Replaces #3681096. Some passenger models.

70-158.......................................$22.69 ea.

1933-60 Grommet for wiring. Fits 3/4” hole through sheet metal. Used in various places including trunk and floor pan. Replaces #3711896. All models.

32-263.........................................$6.19 ea.

1935 Grommet. Switch and coil wire-throughfirewall. Some models as required.

32-62...........................................$9.29 ea.

1937-38 Grommet. Wire harness and speedometer cable through toeboard. Replaces #594341. Excellent copy and material. All passenger models.

60-13..........................................$33.29 ea.

1937-42 Grommet. Wire harness through firewall. Some models.

32-196.......................................$22.29 ea.

1937-42 Grommet. Speedometer cable through firewall. 1-1/4” OD x 3/8” ID x 1/4” thick for 1” sheet metal hole. All models.

32-401..........................................$2.75 ea.

1939 Grommet. Starter to amp gauge wire through firewall. Two (2) per car. Some models as required.

32-66............................................$4.83 ea.

Check the measurement of the set-back on your firewall as illustrated at right. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware and complete instructions needed to install your firewall.

GR-444

Car Firewall Grommets

1939 Grommet. Wire harness through firewall. 1-5/8” OD with 1/2” diameter hole. As required.

SA-51............................................$3.50 ea.

1939 Plug - floor pan. 13/16” OD for 9/16” hole. Various applications on body floor as required.

35-171...........................................$5.39 ea.

1939 Grommet. Vacuum hose through firewall. 1/2” ID x 1-1/16” OD. For 3/4” sheet metal hole. As required.

32-438..........................................$6.05 ea.

1939-50 Grommet. Wiring harness through firewall. Replaces #3653762. For 1-1/4” hole in sheet metal. All models. 60-57...........................................$21.69 ea.

1940-48 Grommet. 3-Hole through firewall for throttle cable, temp gauge, & oil pressure. Has tapered edge. All models.

CV-132.......................................$13.95 ea.

1941-57 Plug, top of cowl for 7/16” hole. At least two needed per vehicle. All passenger, including Sedan Delivery.

TN-90...........................................$1.50 ea.

1949-52 Grommet. Firewall utility for 7/8” hole in sheet metal. 1/8” ID x 1-3/16” OD. As required.

1949-52 Grommet. Heater vent control cable through firewall. For 3/4” hole in sheet metal. 3/16” sloping hole ID. All models.

32-513............................................$6.50 ea.

1949-52 Grommet. Heater vent control cable through firewall brace. For 1/2” hole in sheet metal. 1/4” ID. All models.

32-514............................................$3.99 ea.

1949-52 Rubber plug for firewall use. For 3/4” hole in sheet metal. All models.

35-515...........................................$7.29 ea.

1949-52 Grommet. Convertible top hydraulic lines through firewall. Convertibles only.

60-565..........................................$41.19 ea.

1949-54 Grommet. Speedometer cable and wire harness through firewall plate on drivers side. 2-hole. All passenger models.

TN-20..........................................$14.95 ea.

1949-54 Seal. Firewall access plate. All passenger models. This is the “kidney-shaped” inspection plate that is found on the left side of the firewall.

TN-42...........................................$7.50 ea.

1949-54 Sleeve. Fresh-air inlet pipe at cowl. These look like an oversized rubber band. They are used to seal the large air ducts in the engine compartment to the firewall valve. One (1) pair per car.

TN-14...........................................$7.50 pr.

1949-54 Gasket. Fresh-air inlet valve to firewall. This gasket mounts between the firewall and the fresh-air inlet valve. One (1) pair required per car.

TN-15.........................................$6.00 pr.

1950-57 Grommet, utility, 1/4” to 1/2” ID for 3/4” hole in sheet metal. Some models as required.

CV-162........................................$1.75 ea.

1955-57 Grommet. Starter and convertible top through firewall. 3/4” hole. All passenger models.

TR-73.........................................$2.25 ea.

1955-57 Grommets. Various uses and years.

DC-353

Part # Year(s) Description Each

DC-820 1955 Wire harness, 4-hole $ 2.95

DC-353 1956-57 Main harness plug $ 12.95

DC-823 1957 Speedometer cable $ 6.95

1955-57 Grommet. Firewall distributor wire. Replaces #3723684. For 1-1/8” sheet metal hole. All passenger models.

CV-347.......................................$13.19 ea.

1949-54 Grommet. Firewall throttle cable, oil line, temperature line and choke cable. Replaces #3689044, #3695170. 1-7/16” OD. All models.

ea.

1947-48 Grommet. Special rectangular 2-hole for left side of cowl for hydraulic lines through sheet metal. Convertibles only. 70-554........................................

1927-60 Grommet, electric wire through firewall.

7/16” ID. for 11/16” hole.

Replaces #117961.

CV-276........................................$7.15 ea.

1958 Grommet. Firewall, utility, for various usages. 1-5/8” OD. Four (4) marked holes. Can handle up to four (4) wires. 60-385.......................................$27.69 ea.

Truck Firewall Grommets

1932-46 Grommet, firewall, oblong. Fits steel retainer for throttle & choke cables, oil & temperature lines. Replaces #367885, #3681071. 7/16” x 1-1/8”. All models.

32-47...........................................$2.40 ea.

1929-32 Grommet, Electrolock cable through firewall.

For 1 - 11/16” Hole

All models

GR-186......................................$5.95 ea.

RW-268 1932 (5-hole).....................$11.50ea.

60-10 1933-46 (4-hole)....................$31.89 ea.

1933-46 Grommet for ignition switch conduit through firewall. Replaces #379023, #3681096. All models.

70-158.......................................$22.69 ea.

1939-55 Grommet, wiring harness through firewall, for 1-1/4” hole in sheet metal.

Replaces #3653762.

1939-50: All Models.

1951-55: All (exc Dubl-Duti)

60-57..........................................$21.69 ea.

1940 Grommet, ignition to starter wire through firewall. All models.

CV-162........................................$1.75 ea.

1/4”

1929-42 Grommet, vacuum line through firewall. Replaces #379082. Fits 3/4” hole in sheet metal. All commercial. 32-64..........................................$5.39 ea.

1937-42 Grommet, wire harness through firewall. All models.

32-196......................................$22.29 ea.

1937-55 1st Series Grommet, speedometer cable through firewall for 1” sheet metal hole. All utility models. 3/8” ID x 1-1/4” OD by 1/4” thick.

32-401.......................................$2.75 ea.

1941-59 Grommet, wire harness thru firewall, 1-5/8” OD x 1/2” ID

SA-51...........................................$3.50 ea.

1947-49 Grommet, firewall, for throttle & choke cable, oil & heat lines. Has tapered edge.

SA-84...........................................$3.50 ea.

Continued on next page....

DC-820

Continued from last page....

Truck Firewall Grommets

1950-59 Grommet, firewall, for throttle & choke cable, oil & heat lines. 1-7/16”OD.

1967-72 Pad, junction box mounting, on firewall. All models.

Utility Grommet

1950-57 Grommet, utility, 1/4”-1/2” i.d., for 3/4” hole in sheet metal. Some models as required.

Utility Mounting Pad Stock

1926-71 Mounting pad stock. Continuous, for lights, hinges, brackets, and other bright work when no molded pad is available. 1/16” thick with special edge lip to hug brightwork when clamped down. Shaped outline to suit. All models.

R-Blox Sound Deadener

R-Blox Extreme Mat is 70 mil (.07”) thick, and consists of a Viscoelastic dampening compound on an aluminum foil facing layer which is bonded on to substrates producing astonishinglyear-pleasing dampening results while adding structural mass and improving sound quality.

RX-50 50 sq. ft. Extreme Mat (1 roll 33.5 ft. x 18”) includes a R-Blox wooden roller & installation instructions. $199.50 roll (os)

RX-100 Same as RX-50 except two (2) rolls. Save $$$$ $375.00 2 rolls (os)

R-BLOX BY THE LINEAR FOOT

RX-LF One linear foot = 1-1/2 square feet (from 18” wide roll) $ 7.00 linear foot

SA-49

CD-48

CD-47

CD-90

TR-73

32-263

FS-645

CV-314

CV-310

CV-312

CV-210

Insulation & Sound Deadening

Dynamat

Dynamat Xtreme is a butyl composite with aluminum constraining layer, sheet metal vibration dampener. This material is the ultimate in sound dampening and thermal control. Material can withstand temperature ranges between -65F to +300F. Four times the sound deadening power of Original Dynamat!

10455

Dynamat is a premium sound damper and heat shield material. For added acoustic benefit and lower frequency attenuation, use Dynaliner or Hoodliner, a high grade acoustic foam composite material.

The Hoodliner is a polyether urethane based with a reinforced aluminized facing and pressure sensitive adhesive on application side, thermo-acoustic foam. This product is made to be applied inside the automotive engine compartment on the underside of the hood. Both material and adhesive can withstand temperature ranges between -40F to +225F. 11905

Dynamat Dyna Deck

DynaDeck is a waterproof, three part composite carpet replacement combining the high thermal insulation capability of Dynaliner with the low-frequency exhaust noise rejection of DynaPad. The top layer is a durable deep twist embossed vinyl grain that matches the textured floor pattern of vintage cars. DynaDeck does not absorb water and is ideal for use in street rods, jeeps, convertibles and vintage sports cars where a durable waterproof floor material is desired.

Carpet or Floormat Insulated Backing Pad

1937 - Mark Nelson, ND

Insulation & Sound Deadening Systems

Quality Heat

mildew proof

Needle punched synthetic fiber

Fire retardant

Reflects 97% of infrared energy

Insulation “R” factor of 18.3

Temperature resistance - 40 degrees F to 700 degrees F 99.5% pure aluminum

Fiberglass reinforced

Flame retardant poly insert

Pre-Cut, Ready-to-Install Kits

Introducing a multi-stage, automotive insulation and sound damping system to give older Cars and Trucks the “quiet riding comfort” found in today’s new vehicles coming off automotive assembly lines. AcoustiSHIELD kits are designed on current, “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration and heat in the passenger cabin. These kits are pre-cut and ready-to-install in a couple of hours, with easy-to-follow illustrated instructions-everything you need to do the job right.

Kits Include:

Fully illustrated instructions for an easy, painless, two-hour installation; Pre-Sized Sound Damper Pads; PreCut, Ready-to-Install Heat Shield Absorber/ Barrier Panels; Spray Adhesive and Aluminum Sealing Tape

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

Car Insulation & Sound Deadening Systems

Continued on next page....

Floor Mats, Trunk Mats & Carpet Kits

Passenger Car Floor Mats

Passenger Car Trunk Mats

Carpet Kits

Truck Floor Mats

1941-46 Floor mat - rubber only - black

FS-13A 1947-55 1st Series 3 or 4-speed - rubber - black OEM type $120.70

FS-4905 Cab over engine (COE) - 4-speed - 2 pcs. $139.50*

FS-4902 1955-59 2nd Series 3-speed rubber only - black $163.50*

FS-77 1964-66 Small floor - rubber only - black. Original. $175.95*

FS-4935 1967-72 Exc. Blazer. Small trans. w/factory tails - black. $195.00*

FS-4936 Exc. Blazer. Large trans. w/factory tails - black. $169.95*

FS-4899

FS-4951

RW-315

1929-1946 Truck Replacement Panels

grille filler panel - Fiberglass

Truck upper windshield panel fiberglass $167.00 ea.

RW-317 Truck floorboard replacement panel4-speed - Steel $175.00 ea. (os)

RW-321 Truck floorboard replacement panel3-speed - Steel $185.00 ea. (os)

SA-345 1939-46 Floorboard & toeboard screw set - 21 pcs $ 8.50 set

RW-485 Truck upper windshield filler panelABS Plastic $137.50 ea. (os)

RW-486 Truck wiper control filler panelABS Plastic (specify right or left) $ 19.00 ea.

RW-487 Truck wiper control blank plate - ABS Plastic $ 18.00 ea.

RW-315 1941-46 Truck floorboard replacement panel - Steel - 3-speed $175.00 ea. (os)

RW-316 Truck floorboard replacement panel - Steel - 4-speed - 1/2 ton only $175.00 ea. (os) (os) - Oversize item - special freight charges apply.

SA-345 (1939-46)

SA-343 (1934-36)

SA-137 (1939-40)

RCC-11 (1939-46)

RW-357 (1936-38)

SA-209 (1939-46)

SA-279 (1941-46)

(1941-46)

BB-8 LEFT(1939-46)

RW-485 (1939-46)

SA-301 (1934-35)

RW-486 (1939-46)

SA-344 (1934-36)

AF-186 (1931-33)

SA-257 (1941-46)

RW-487 (1939-46)

RW-321 1936-38

AF-182(1931-33)

RW-317 (1936-38)

SA-435R (1939-46)

Sheet Metal Repair Panels - Chevrolet & GMC Pickups

1947-55 (1st Series) Pickup Truck

1947-55 (1st Series) Truck Complete Stainless Steel Body Bolt Sets

Complete body kits contain individually labeled component kits to eliminate guess work in assembling your project! If you have a panel or flat bed Truck, order a “Bedless Body” kit. Each kit is available in 3 bolt styles: Button/Flat Socket for the custom or street rod look, Hex/Phillips head for the economy builder, and Indented Hex for the original look. Kits include stainless steel fasteners for: Bed Mounting, Bed Strips, Bumpers, Door Hinges, Door Latch & Catch, Door Panel, Front Bed Panel, Fender To Firewall Braces, Front & Rear Fenders & Inner Fenders, Glove Box, Grille & Gravel Pan, Headlight & Parking Light Lens, Hood Hinges & Latch, Interior & Window Trim, Outside Mirror, Radiator Support, Regulator & Relay, Running Boards & Tail Lights.

Sheet Metal Repair Panels - Chevrolet & GMC Pickups

1947-55 (1st Series) Pickup Truck

1947-55 (1st Series) Pickup Truck

ea.(os)*

SA-402 Roof panel brace - Front $ 69.50ea(os)*

SA-403 Roof panel brace - Rear $ 64.50ea(os)*

RW-847 Rear window INNER panel - 5 window cab $ 325.00 ea.(os)*

RW-851 Lower rear outer cab panel (Modify for 1949-55 by cutting the gas filler neck opening) $ 439.50 ea.(os)*

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown (os) - Oversize item - special freight charges apply. Shipped by truck - special freight charges will apply.

Sheet Metal Repair Panels - Chevrolet & GMC Pickups

1955-57 (2nd Series)

1955-57 (2nd Series) Pickup Truck

1955-59 (2nd Series) Pickup Truck

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown (os) - Oversize item - special freight charges apply. Shipped by truck - special freight charges will apply.

1955 - Dino Gonzalez, Or

FS-642

FS-497 SA-318

Sheet Metal Repair Panels - Chevrolet &

1955-59 (2nd Series) Pickup Truck

GMC Pickups

1955-59 (2nd Series) Pickup Truck

1958-59 Fleetside & Stepside

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING.

1960-66 Fleetside & Stepside

NOTE:

Complete body kits contain individually labeled component kits to eliminate guess work in assembling your project! If you have a panel or flat bed Truck, order a “Bedless Body” kit. Each kit is available in 3 bolt styles: Button/Flat Socket for the custom or street rod look, Hex/Phillips head for the economy builder, and Indented Hex for the original look. Kits include stainless steel fasteners for: Bed Mounting, Bed Strips, Bumpers, Door Hinges, Door Latch & Catch, Door Panel, Front Bed Panel, Firewall, Cowl & Battery Box, Front & Rear Fenders & Inner Fenders, Front Splash Pan, Headlight & Parking Light Lens, Hood Hinges & Latch, Interior & Window Trim, Outside Mirror, Radiator Support, Seat Mounting, Tail Gate, Stepside Steps, Tail Lights.

- Stephen Hall, Or

Sheet Metal Repair Panels - Chevrolet & GMC Pickups

1967-72 Fleetside & Stepside

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown (os) Oversize - special freight charges apply. Shipped by truck - special freight charges apply.

FS-612A Left

TR-503 Left

TR-586 Right

TR-502 Right

TR-486 Right

TR-286

Sheet Metal Repair Panels - Chevrolet & GMC Blazer, Jimmy & Suburban

1969-72 Blazer & Jimmy

1969-72 Blazer & Jimmy

1967-72 Suburban

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Item is not shown (os) Oversize - special freight charges apply. Shipped by truck - special freight charges apply.

Stainless Steel Body Bolt Sets

1967-72 Truck Complete 1973-87 Truck Complete

Complete body kits contain individually labeled component kits to eliminate guess work in assembling your project! If you have a panel Truck, Blazer or flat bed Truck, order a “Bedless Body” kit. Each kit is available in 4 bolt styles: Button/Flat Socket for the custom or street rod look, Hex/Phillips head for the economy builder, Indented Hex and Indented Hex in black for the original look. Kits include stainless steel fasteners for: Bed Mounting, Bed Strips, Bumpers, Door Hinges, Door Latch, Front Bed Panel, Cowl Cover & Battery Box, Front & Rear Fenders & Inner Fenders, Headlight & Parking Light Lens, Hood Hinges & Latch, Interior & Window Trim, Outside Mirror, Radiator Support, Seat Mounting, Tail Gate, Stepside Steps, Taillights.

Kits do not include hood step bolts.

1982 - Walt Templeton , OR

Sheet Metal Repair Panels - Chevrolet

1973-87 Chevrolet/GMC Pickup

& GMC Pickups

1973-87 Chevrolet/GMC Pickup

1973-87 Chevrolet/GMC Pickup

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. (os) - Oversize item - special freight charges apply.

Sheet

Metal Repair Panels - Chevrolet Blazer & GMC Jimmy

1973-91 Full-size Blazer & Jimmy

FS-840

1973-91 Blazer & Jimmy

1973-91 Blazer & Jimmy

Sheet Metal Repair Panels - Chevrolet Suburban

1973-91 Chevrolet Suburban

1973-91 Chevrolet Suburban

Shipped by truck - special freight charges apply.

Hole Plugs

Flush Mount (Plastic)

These plugs are made of polyethylene. Use on 14 to 16 gauge sheet metal. Prices are listed for each, 20 or more and box quantity. Quantity per box is shown in last column.

Hole Plugs (Plastic)

These plugs have a depressed center as illustrated. Prices are listed for each, twenty (20) or more and box quantities. Buy in box quantities and SAVE! Box quantity shown in last column.

Hole Plugs

These plugs have many uses on the body, floor, firewall, trunk and other areas that require a hole to be filled.

Hole Plugs

Metal (Nickel Plated)

These plugs have a shiny finish that will look good in visible spots on your vehicle. Prices are listed by each, quantities of ten (10) or more and by the box. Buy in box quantities and SAVE! Box quantity shown in last column.

1968 - MANUEL GALAN , OR

1931-36 Body bumper, rear, at body hold-down bolt. Use with original metal cover. 2 required per vehicle.

1931-35: All Truck 1936: All High Roof Cabs 60-412......................................$61.89 pr.

Cab Mounting Kits

1936 (low roof) - 1946 Blocks, wood cab mounting. RW-308.....................................$10.95 pr.

1936-46 Truck floor rail wood block kit (Connects cowl assembly to cab rails at the floor)

CV-140.....................................$18.95 kit

Cab Mounting Parts

1940-46 Bumper, cab hold down bolt. Replaces #3654239. 2 per cab. Not for single unit bodies.

60-510.......................................$63.69 pr.

1947-55 (1st Series) Pad, front body mounting, rectangular. 2 per truck.

DS-611........................................$3.50 pr.

1947-58 Bushing, rubber, body shackles.Check your mode for number required.Replaces#3660540. 1-1/8” long, 7/16” ID.

1947-55: Chevy Truck (1st series)

1947-58: GMC Truck

CV-236........................................$1.50 ea

1955-59 (2nd series) Pad and steel bushing assembly for body bolt #2, rear. Two (2) required per vehicle.

CV-188....................................$31.95 pr.

1955-59 (2nd series) Round body mounting pad. Two (2) required per vehicle.

CV-189........................................$7.50 ea.

1963-66 3/4 & 1 ton truck cab mounts. This is a revulcanizing service only. Send in your original mounts and allow 3-4 weeks for delivery.

70-2212....................................$249.95 pr.

SA-228

SA-418

AF-35K

AF-38K

DS-616

SA-419

CD-39B

Body Seam Sealer

Use this 3M product to seal small cracks and other openings, such as drip rails, molding, cowling and welded seams. Great to seal up the new repair panels you will be installing! Heavy consistency makes this sealer excellent for sealing vertical seals. Used by professionals to seal metal seams in cars & trucks.

08531 3M Heavy Drip-Chek Sealer - 5 oz. Tube.................................$26.95 ea

POR Patch

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

POR Patch™ The ultimate filler/adhesive. Apply right over rust or metal. Dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It’s so tough it may actually add strength to weakened metal. And it won’t absorb moisture and swell like conventional body fillers. It’s incredible!

PA-63 Black, 4 oz.......$22.75 ea. • PA-64 White (dries clear), 4 oz......$22.75 ea.

Glazing Compound

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

POR Epoxy Putty

POR Epoxy Putty ™ It’s so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers. Since it is water based, you can simply wet your fingers and work it until it is almost perfectly smooth before it drieseliminating most sanding. When it cures it’s rock hard making it perfect for repairing steel, plastics, etc. Sticks to damp surfaces - even cures under-water!

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

PA-62 Epoxy Putty - One pound pack...............................................$44.95 ea.

Fender Welt

B-184 Black Vinyl 3/16” bead - Semi-gloss $14.50 rl.

B-186 Black Rubber 1/4” bead $35.00 rl.

Our 3M™ Auto Bedding and Glazing Compound is a flexible sealer designed specifically for creating a watertight seal between windshield rubber gaskets and auto bodies. This synthetic rubber-based sealer remains permanently soft, making it suitable as a bedding and a supplementary adhesive sealer for auto glass. It also resists sagging for use in vertical and overhead auto seals. Container is 12.8 ounce cartridge.

08509 3M Auto Bedding & Glazing Compound - Black.................$31.50 ea

08693 3M Auto Glass Urethane Adhesive - Black...........................$29.95 ea

Street Rod Welting

1927-72 All, fenderwelt. Superior quality. Available in black or chrome. 25ft. rolls.

70-1097 Black Vinyl 1/4” bead - High-gloss $69.50 rl.

AF-659 Black Vinyl 1/4” bead - Semi-gloss $30.00 rl.

70-1101 Chrome Vinyl l3/16” bead ...$79.50 rl.

Truck Chassis & Sheet Metal Seals

1937-40 Anti-squeak, running board to body, bulb seal type. Replaces composite solid and sponge original type. All models except COE.12 ft. strip.

CV-54...............................................$19.50 ea.

1947-59 Seal, fender splash panels, etc. Replaces #3701900 slotted sponge rubber. All commercial

CV-288 1947-55 Trucks.............$3.00 ft.

TN-67 1955-59 Trucks.............$13.50 pr.

Grain vinyl features 3/16” bead for all fender seams or other bolt on body parts. Adds that clean, factory detail to any car or pickup.

B-185 25’ roll......$38.50 roll Add code to part # for color.

1954 - Robert Rienzo, NJ

Master Wood Bed Kits

Master kits include: wood, nuts, bolts, washers, bed strips and angle strips (when required). 1937-66 kits also include bed mounting blocks & pads. Prices are for Chevrolet & GMC Trucks Only. Other makes or years can be quoted separately. Prices listed are for 1/2 & 3/4 ton models and do not include staining, varnishing, hole drilling or installation. Add $40.00 to prices below for main mounting holes to be drilled in the wood.

Bed Wood Kits

All wood kits are oversize. Special freight charges apply.*For Longhorn models call for price. **9-Board *** 8-Board

hole from the front bed panel can be

Specify when ordering.

panel can be either 11-1/2” or 25-3/8”. Specify when ordering.

Pickup Bed Restoration Manual

This 14 page booklet explains the history of the stepside pickup bed and gives helpful hints when assembling a pickup bed.

Shows illustrations of parts required and gives measurements. A great help!

Part #SA-108......................$5.75 ea.

Bed Hardware Kits

Complete Hardware Kits Include: Carriage bolts (including bed-to-frame bolts), offset washers, lock washers & nuts. All fasteners required for a complete installation! Specify year & model. Stainless kits are all stainless. Steel kits are zinc or cadmium plated.

STEPSIDE

Prices are per set. Steel Unpolished Stainless Polished Stainless

Shortbed $63.00 $106.00 $134.00

Longbed $66.00 $120.00 $145.00

FLEETSIDE

Prices are per set. Steel Unpolished Stainless Polished Stainless

Front Bed Panels

Sets of Pickup Bed Strips

*Not original for this application. All items in this chart are oversize - special freight charges will apply.

Pickup Bed Strips

All bed strips are oversize - special freight charges apply.

The bed strips listed below are for Chevrolet & GMC trucks only. We can make strips for any truck, any length - on special order. All strips are square punched in the correct pattern for each specific year. Unpunched strips can be special ordered. LONGBED

SHORTBED

* NOTE: Angle covers are used when it is not practical to remove old angles from the bed. These covers fit over the old angles and use the same bolts to hold them in place. Covers have no holes, drill as necessary. Oversize freight charges apply to all bed strips.

Complete side bed panels come with stake pockets and angles installed. 1941 and newer shortbed bed sides have holes punched for fenders, angle strip holes, rear sill holes, chain

eyebolt holes and front bed panel holes according to year. Bed sides ordered without stake pocket holes will not have fender holes. There is a crating charge in addition to a truck freight charge.

Pickup Side Bed Panels

right

Indicates that this bed side does not come with the center stake pocket.!! Differences in Cameo bed sides from regular truck bed sides - internal weld nuts for fiberglass panels, 6-8 additional holes for tailgate cables, and there is a special stake pocket for Cameo only. When ordering, specify with or without: stake pockets, stake pocket holes, bed angles installed (Stepside models only)

All pickup side bed panels are shipped truck freight. NOTE: Specify Right or Left when ordering bedsides.

RW-570 Left

SA-285 Left

SA-289

SA-282 Left

SA-275

SA-291 Right

Tailgates

* Not original for this application

All tailgates are oversize - special freight charges apply.

Tailgate Decals

SA-64C

SA-64

Tailgate Cover/Weld-In Panel

These cover the entire outside portion of the tailgate for a smooth effect. Full cover should be tack welded on and fit so the tailgate operates freely. Most available in SMOOTH, 4 ROW LOUVERED, 7 or 9 ROW LOUVERED & BOWTIE EMBOSSED.

Bed Mounting Blocks

MK-41A Fleetside 4 Row Louvered cover $281.00

MK-41B Fleetside 9 Row Louvered cover $602.00

MK-41C Fleetside cover with embossed Bowtie emblem (pattern 24” wide x 8” tall)

Tailgate Protector

$302.00

MK-42 1981-87 Fleetside Smooth cover $188.00

MK-42A Fleetside 4 Row Louvered cover $281.00

MK-42B Fleetside 9 Row Louvered cover $347.00

MK-42C Fleetside cover with embossed Bowtie emblem (pattern 24” wide x 8” tall) $302.00

All items in this chart are oversize items - special freight charges will apply.

MK-30 1954-87

Tailgate Protector - Stepside - Stainless (covers top edge of tailgate to prevent dents)

$35.00 ea.

MK-33B

SA-43

SA-81A

SA-81AA

SA-43L

SA-81LB

SA-81LA

MK-30

MK-34C

Tailgate Chains & Hardware

Tailgate Hinges & Cables

Roll Pans

*This installation requires cutting the rear cross sill for license box clearance. All items in this chart are oversize items - special freight charges will apply. These custom roll pans are made of 18 gauge steel. The roll pan goes in place of the bumper for a smooth effect. It can be bolted or welded in place. Available with or without a recess area for license plate (license plate lights not included). Louvers in 4 row or 7 row are available on special order.

Bed Cross Sills

*This installation requires cutting the rear cross sill for license box clearance. All items in this chart are oversize items - special freight charges will apply.

Bed Stake Pockets

Bed Stake Pocket Hole Covers

Bedside Hole Caps

Miscellaneous Bed Hardware

Bedside Lighted Hole Caps

TR-355

GR-650

SA-304F

RW-875L

Step Plates

RW-875R

Stepside Pickup Bed Steps

For rumble seat step pads see page 12 >

POR Epoxy Putty™

Body Seam Sealer

08531 3M Heavy Drip-Chek Sealer - 5 oz. Tube..............................$26.95 ea

Glazing Compound

Use this 3M product to seal small cracks and other openings, such as drip rails, molding, cowling and welded seams. Great to seal up the new repair panels you will be installing! Heavy consistency makes this sealer excellent for sealing vertical seals. Used by professionals to seal metal seams in cars & trucks. Our 3M™ Auto Bedding and Glazing Compound is a flexible sealer designed specifically for creating a watertight seal between windshield rubber gaskets and auto bodies. This synthetic rubber-based sealer remains permanently soft, making it suitable as a bedding and a supplementary adhesive sealer for auto glass. It also resists sagging for use in vertical and overhead auto seals. Container is 12.8 ounce cartridge.

POR Epoxy Putty ™ It’s so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers. Since it is water based, you can simply wet your fingers and work it until it is almost perfectly smooth before it dries - eliminating most sanding. When it cures it is rock hard making it perfect for repairing steel, plastics, etc. Sticks to damp surfaces - even cures under-water!

PA-62 Epoxy Putty - One pound pack................................................$44.95 ea.

POR Patch™

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

POR Patch™ The ultimate filler/adhesive. Apply right over rust or metal. Dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It’s so tough it may actually add strength to weakened metal. And it won’t absorb moisture and swell like conventional body fillers. It’s incredible!

SA-304

GR-134B GR-134A

Passenger Running Board Mats

Made of top quality rubber. Exact duplicates of the originals. Mount directly to running board or to old backing plate. These mats are show quality (except GR-134, GR-134A and GR-134B).

Passenger Door Sill Mats

1941-48 Mats, door sill, rubber with metal backings as original. For 2-door styles, 1011, 1027, 1027B, 1067, 1211, 1227, 1227B, 1227P. For style 1007 Fleetline Aerosedan, see 60-418

1941-48 Mats, door sill, rubber with metal backing as original. These mats fit Sedan Delivery and 4-door models (except Fleetline 4-door) ONLY.

70-1118 (4-dr SDL, front mats)...........................................$429.99 pr. 70-1119 (4-dr - rear mats)....................................................$403.69 pr.

1942-48 Mats, door sill, rubber with metal backing as original. Replaces #414886-87. Fits 2-door Fleetline Aerosedan, style 1007 ONLY. Will not fit other 2-door styles.

Running board Seals

1937-40 Anti-squeak, running board to body, bulb seal type. Replaces composite solid and sponge original type. All models except COE. 12 ft. strip. CV-54........................................................................................$19.50 ea.

(os) - Oversize item - special freight charges apply.

1939-54 Anti-squeak gasket, fender to running board. All 1/2 ton commercial models.

BB-5 1939-40 Trucks (front & rear)..........................$15.00 set

BB-6 1941-46 Trucks (front & rear)..........................$14.95 set

SA-127 1947-55 1st Trucks (rear).............................$ 5.00 pr.

Running Board Hardware Kits

CV-335

1947-55 (1st series) Rubber seal, running board to body, made in 2 lengths. Specify A or B when ordering. A: pickups (40” per strip, each side) B: panels & suburbans (64” per strip, each side).

SA-98

SA-127 FS-502

CV-335A (40”) Rubber Seal........................................$27.95 pr.

SA-98 Metal Retainer for CV-335A ..........................$ 9.95 ea.

SA-98SS Stainless Retainer for CV-335A..................$17.50 ea.

CV-335B (64”) Rubber Seal .......................................$29.95 pr.

1937 - Robert Mulhall, IL

Running Boards & Parts

Street Rod

Smoothie Running Boards

These street rod “smoothie” running boards are made in the USA in heavy 16 gauge steel Oversize item - special freight charges will apply

- special freight charges apply cont’d on next page...........

Radiator Splash Aprons & Hardware

Running Board Trim & Clips

stainless - Driver Quality. 77-3/4”

running board trimstainless - Show Quality - Hand Made - Specify Year. Allow 3-4 weeks.

(OS) = oversize and special freight charges will apply.

* Shipping tube charge of $8.00 in addition to freight charges.

We want to see all the hard work that you put in to your vehicle.

Send Us photos & stories of your classic vehicle and we might feature it in our catalog, newsletter, or website. Choose your background carefully.

llingstation.com

SEND US YOUR PHOTOS! Email:

Grille to Bumper Splash Aprons & Parts

Fenders

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. Shipped by truck - special freight charges apply.

Inner Splash Aprons

SPECIFY RIGHT OR LEFT WHEN ORDERING.

1937-38 Truck inner fender panels - Fiberglass replacement

*These Inner fender kits are for Street Rod applications only.

Note: All items in this section are oversize and special freight charges will apply.

Misc. Fender Hardware

Passenger Car Front Fender Anti-Squeak Kits

Truck Inner Fender Seals & Grommets

Fender-to-Cab Seals

Car Fender Braces

Pickup Fender Braces

Passenger Car Fender Seals & Pads

See Page 79 For Fender Welt

1933-39 Anti-Squeak, runningboard-to-body. Replaces #350645. Bulb seal type replacing composite solid and sponge rubber original. All models including sedan delivery. Twelve (12) foot strip.

CV-54..........................................$19.50 ea.

1935-39 Seal, wheel streamliner (fenderskirt) to fender. Replaces #601620. Two strips 5 foot long. Used on all models with fenderskirts.

60-298.........................................$82.39 pr.

1939-41 Pad and seal, fenderskirt edge. Most late pre-war GM cars with fenderskirts. Each strip five (5) feet long.

70-55..........................................$95.89 pr.

1940-50 Pad, fenderskirt edge, similar to 70-55 but thinner. Each strip five (5) feet long.

20-111........................................$83.19 pr.

1941 Pad, mounting, boot scraper-to-front fender. Replaces #605251-2. Right and left. Authentic factory accessory. Passenger cars as required.

60-325........................................$90.89 pr.

1941 Anti-Squeak, front body-to-fender. Replaces #3658853-4. Right and left. Faithful copy of a difficult part. All passenger cars.

60-1...........................................$164.59 pr.

1941-61 Seal, fender splash panels. Replaces #3701900, #3774699. 9/16” x 7/8” slotted sponge rubber. All models including Corvette.

CV-288.........................................$3.00 ft.

1942-47 Pad and seal, fenderskirt edge. Exact copy. Trim notch for skirt lock at installation. Most models. Two five (5) foot strips for two fender skirts.

70-154........................................$11.95 pr.

1942-48 Seal, front fender baffle. Replaces #3665693-4. Right and left for one car. All passenger models.

60-522........................................$73.69 pr.

1942-47 Pad and seal, fenderskirt edge. Good quality and workmanship. See sketch for comparison. Ten (10) foot strip.

70-289........................................$89.69 ea.

1949-54 Pad and seal, fenderskirt edge. Replaces #3695672. All passenger, Sedan Delivery and Station Wagons. Ten (10) foot strip for two skirts.

CV-109........................................$12.50 pr.

1955-57 Seal, rear wheelhouse panel-to-quarter panel, outer. 5 ft. strip for each side. All models.

60-354........................................$95.89 pr.

1955-64 Seal, fenderskirt edge. Proper profile for most skirts of this period including Foxcraft. Five (5) foot strip.

60-201........................................$57.29 pr.

Metal Fender Skirts

Stainless Steel Scuff Pads for Fender Skirts

Fender Skirt Mounting Clips

Fender Skirt Bloomers

Passenger Car Accessory Fender Ornaments

Fender Gravel Guards

Universal Curb Feelers

Find the curb before your hubcaps do! This 50’s accessory will truly jog some memories.

BA-514 Universal

Splash/Mud Guards

AF-645 Universal Truck splash guards-rubber - early bowtie35 -1/2” X 24 -1/2”, 1/2” - thick heavy duty rubber, can be trimmed to any desired size. $ 95.00 pr.(os)

AF-646 Truck splash guards-rubber - late bowtie35-1/2” X 24 -1/2”, 1/2” - thick heavy duty rubber, can be trimmed to any desired size.

Passenger Rear Fender

Gravel Guards - Rubber

1942-48 gravel guards are exact replacements. 1941 & 1949-52 are an acceptable substitute but are only glue-on covers. Items listed below are rubber only.

Liquids cannot be shipped out of the continental United States or be sent Air Freight. Ground shipping ONLY.

L-275

L-271A

L-271

GR-29

RW-68

Exterior Trim Parts

1960-61 Impala Exterior Trim

1962-64 Impala Exterior Trim

* Shipping tube charge of $8.00 in addition to freight charges apply (os) = Oversize item - special freight charges

Gas Door Edge Guard

Passenger Cars - all polished stainless. Gas door bumperssee page 345.

BA-159 Impala (2dr models) rear quarter molding - includes “IMPALA” letters $199.95 pr. (os)*

BA-159SS SS rear quarter molding - aluminumincludes “IMPALA” letters $219.95 pr. (os)*

BA-160 Impala (2dr models) molding setaluminum (6 pcs.) $295.00 set (os)*

BA-160SS SS molding set - aluminum (6 pcs. with letters & clips) $299.95 set (os)*

BA-163 Impala “SS” rainbow tape $ 36.95 set

BA-161 1963 Headlight lower “eyebrow” trim $ 37.95 pr.

BA-199 Headlight upper “eyebrow” trim $ 62.50 pr.

BA-201 Pass. taillight outer trim at rear corners (w/clips) $114.95 pr.

BA-219 Tail light outer trim clips (12 pieces) $ 15.00 set

RW-70 Front license panel - aluminum $ 54.95 ea.

RW-72 Pass. rear license panel - aluminum $ 54.95 ea.

BA-321 Passenger trunk upper moldingaluminum with “Chevrolet” script $189.00 ea. (os)*

BA-235 Trunk lower molding - aluminum $ 68.50 ea.*

BA-327 1963-64 Impala hardtop windshield trim $189.95 set

L-121 Hardtop & Conv. beltline molding under vent window $ 85.00 pr.

* Shipping tube charge of $8.00 in addition to freight charges apply (os) = Oversize item - special freight charges

RW-66

Exterior Trim Parts Continued...

1964 Impala Exterior Trim

1964 Impala SS 2-Door Side Moldings with Inserts

1964 Impala 2-Door Exterior Trim

SS Impala complete molding set - alum. - 8 pcs. $375.00 set(os)*

SS Impala molding inserts only (part of SS moldings listed above) - 8 pieces. $139.95 set(os)*

1964 Passenger Exterior Trim

models) lower rear quarter molding - (specify right or left)

ea.(os)* BA-202 Impala (2-door models) complete molding set - aluminum (14 pieces)

1964 Impala 4-Door Exterior Trim

(4-door models) front door upper molding - aluminum - 2 required

4-door models, exc. wagon, front door lower molding - aluminum - 2 req

ea. BA-284 (4-door models) rear door upper molding - aluminum - 2 required $ 39.95 ea.

BA-285 (4-door models) rear door lower molding - aluminum - 2 required $ 35.00 ea.

BA-287 (4-door models) rear quarter upper molding - aluminum - 2 required $ 55.00 ea.(os)*

BA-286 (4-door models) rear quarter lower molding - (specify right or left) $ 69.50 ea.(os)*

BA-288 (4-door models) complete molding setaluminum (18 pieces)

$519.00 set (os)@* @ SAVE over $100.00 off individual prices!!

* Shipping tube charge of $8.00 in addition to freight charges. (os) = Oversize item - special freight charges apply

BA-238 SS, Bel Air, Biscayne inner tail light cove moldings - aluminum $ 62.00 pr. BA-234 SS, outer tail light cove moldings - aluminum $ 79.50 pr. BA-539 Non-SS Models outer tail light cove moldings $ 74.50 pr. BA-236 SS, Bel Air, Biscayne trunk upper molding - aluminum $ 69.95 ea.* BA-237 SS, Bel Air trunk lower molding - aluminum $ 69.95 ea.* BA-263 Passenger trunk split molding - aluminum $ 65.00 ea.* BA-189 Impala trunk molding 3 piece set with “CHEVROLET” script $ 179.95 set*

Note: See fastener section for molding clips

* Shipping tube charge of $8.00 in addition to freight charges. (os) = Oversize item - special freight charges apply,

Quality Reproduction Parts for Chevrolet & GMC

Exterior Trim Parts

Passenger Exterior Trim

GM-1000 1920’s & 1930’s Fisher Body (closed car only) roof kit: top material, padding & replacement type vinyl edge trim - 96” x 54” (With instructions)

GM-1000A Fisher Body (closed car only) roof kit: top material, padding & replacement type vinyl edge trim - 120” x 65” (With instructions)

AF-584 Wire-on - black

AF-585 Hidem - black

ea.

kit (os)

Passenger Car Rocker Moldings

Door, Fender & Tailgate Trim

Notes: (os) = Oversize item - special freight charges apply * Shipping tube charge of $8.00 in addition to freight charges.

1962-66 Fleetside Truck

Deluxe Fleetside Side Trim

Rocker Molding Clip Sets

Pickup Bed Trim

Complete Trim Sets

Truck Exterior Trim

Fleetside Molding Clip Sets

1967-72 Fleetside Truck

Exterior Trim Parts

1969-72 Fleetside Truck Upper Side Trim

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING.

Shipping tube charge of $8.00 in addition to freight charges. (os) - Oversize item - special freight charges apply.

Bedside upper trim (longbed with 127” wheel base) - no clips

FS-584LLB Bedside upper trim (longbed with 133” wheel base) - no clips

RW-584K 1971-72 Fleetside upper trim set of 8 pieces (115” wheel base)with adhesive clips

RW-584LK Fleetside upper trim set of 8 pieces (127” wheel base)with adhesive clips

RW-584LLK Fleetside upper trim set of 8 pieces (133” wheel base)with adhesive clips

$ 65.00 ea.(os)*

$ 96.00 ea.(os)*

$ 369.00 set(os)*

$ 369.00 set(os)*

Suburban lower molding set. Set consists of 11 aluminum mouldings extending from the front bumper to the tailgate, which accent the lower body lines on the side of the Suburban. Mouldings are bright-anodized aluminum with a black painted accent stripe. Clips and hardware for attachment to the body are included except for lower bed front and rear mouldings.

MK-553K......................................................$1352.00 set (os)*

NOTE: SPECIFY RIGHT OR LEFT WHEN ORDERING. * Shipping tube charge of $8.00 in addition to freight charges. (os) - Oversize item - special freight charges apply.

1972 - JOE DAVIS , OR

1967-72 Fleetside & Blazer Lower Side Trim (Woodgrain)

1969-72 Fleetside & Blazer Tailgate Area Moldings

1969-72 Fleetside & Blazer Lower Side Trim (Black)

BLAZER (front of wheel) - RIGHT - no clips

lower trim - 127” & 133” wheel

1967-72 Fleetside Molding Clip Sets 1973-87 Truck Exterior Molding

Quality Reproduction Parts for Chevrolet & GMC

Interior/Exterior Trim & Molding Clips

Universal Type Molding Fasteners

FS-1256 Universal Reveal molding clip 5/8” wide $0.50 ea.

FS-5133 Front fender molding bolt 10-24 x 5/8” for 5/8” to 1” wide. Small $1.25 ea.

FS-8843 For 1/2” to 5/8” molding - nylon $0.40 ea.

FS-2752 Molding size 3/4” to 1-3/4” Large $1.25 ea.

FS-2820 Molding size 1” to 2-1/2” 10-24 x 3/4” $1.50 ea.

FS-13616 Molding size 13/16” to 15/16” wide. Screws to body. Large nylon. $0.85 ea.

FS-3615 Hexagon washer head bolt used on front end sheet metal. 5-16-18 x 3/4” $0.65 ea. 10 or more $0.55 ea.

FS-15783 Hex head bolt w/washer - 5/16”-18 x 7/8” $0.50 ea.

FS-8386 1962-66 Fleetside - fits molding 1” to 1-1/2 wide $ 0.75 ea.

79-4992 1967-72 Pickups and other uses. Hole size 3/8” to 7/16”. 3/4” wide. $ 0.75 ea.

FS-754 Pickup tail light bezel & other uses. Molding size 5/8” thru 1”. Hole size 5-16” to 1/2” $0.75 ea.

FS-12563 1980-on Quarter belt reveal moulding clip - nylon $0.35 ea.

Interior Trim Screw Sets

“J” Type

Universal Type Fasteners

Speed Nuts

Square

Stainless

Tapping Screws

Arm Rest Screw

Sheet

Metal Screws

FS-12339

Stainless Wood Screws

Flange Head Bolt

FS-2109

FS-12339

FS-11369

Convertible Front Bow Seals

1931-32 Weatherstrip, windshield headerto-front-roof rail. Fine grain sponge rubber. A replacement seal, requires minor trimming to install. Replaces #4009225. Cabriolets & Landau Phaetons, Styles 568 & 571. 4 ft /car

70-598..........................................$9.39 ft.

1931-35 Weatherstrip, front bowto-windshield. Soft rubber, hollow body, proper screw holes, hinged flaps front and back.

1931: Landau Phaeton

1932-35: Most convertibles.

70-137......................................$217.29 ea.

1932-1935 Roadster & Phaeton windshield header seal (may fit 1931 also)

70-2394........................................$6.29 ft.

1936 Seal, convertible top front bow-to-windshield with integral end pads. Made to fit Cadillac convertibles but can be adapted to other GM convertibles.

70-46........................................$199.49 ea.

1937-38 Weatherstrip, front bow-to-windshield, outer, right and left. Molded with end hook, screw holes and clearances. Convertibles.

70-138......................................$144.69 pr.

1937-38 Weatherstrip, front bow-to-windshield, inner, right and left. Convertibles.

70-157.......................................$137.89 pr.

1940-52 Weatherstrip, front bow-to-windshield, outer. Correct style to be attached to your original metal strip. Replaces #4563765-66 and other #’s. (The metal strips changed in ‘49 but the rubber cross-section remained the same.) Approx. 4 ft-10 in long. All convertibles.

60-440........................................$70.39 ea.

1941-48 Weatherstrip and pad, front bow-to-windshield, inner. Replaces #4084234 & #4114973. Approx. 4 ft-10 in strip for one car. All convertibles.

70-100........................................$62.19 ea.

1949-52 Weatherstrip for windshield header, lower or rear, to folding top front roof bow. Replaces #4566232. Convertibles.

60-290......................................$231.99 ea.

1955-57 Weatherstrip, folding top front bow-to-windshield, outer.

Replaces #4650077. Extruded section of exact profile. Approx. 4 ft-9 in long. 1 strip per car. Convertible only.

60-200........................................$29.89 ea.

1955-57 Weatherstrip, folding top front bow-to-windshield, rear center section.

Replaces #4211195. Approx. 46” strip for one car

60-253........................................$29.19 ea.

Convertible Roof Rail Weatherstripping Sets

Kits do not include cloth covering. See Cloth Bowdrill Tape below.

Convertible Hinge Pillar Weatherstripping

Roof Rail Weatherstrip

1916-76 Cloth bowdrill tape. Pressure sensitive for covering convertible side window weatherstrip. Water and sun resistant. Available in black or tan and in 2-1/2 inch or 5 inch widths - five (5) feet long.

Convertible Fittings

1937-38 Pads for bottom of folding post or body. Steel core as original. Screw held. Convertibles.

70-279......................................$105.89 pr.

1937-38 Clip, weatherstrip fastening. Replaces #4081540. Front bow to windshield, for holding 70-138 and 70-157 in place.

1930-32 Weatherstrip, side roof rail. Made from dense rubber extrusion. Sold to nearest foot. Used on many open cars during this period.

70-60..............................................$10.79 ft.

1933-41 Weatherstrip, side roof rail. Fits into metal channel retainer. See 70-1172 for cloth covering. This is the original type roof rail weatherstrip used on all GM convertibles for these years.

70-1170..........................................$8.29 ft.

Approximately thirty (30) per car. Cadmium plated. Fits rectangular clearance. For 1/4” hole. Convertible styles only.

70-527.........................................$5.49 ea.

1940 Pads, folding post. Replaces #4101880 (molded as H72069). Steel core. Good copy. All convertibles.

70-503........................................$115.69 pr.

1941-48 Rubber fillers, side roof rail to front roof rail at front corners. Right and left. Replaces #4115405-6. Metal core, threaded for original screws. Convertible coupes.

70-396.....................................$121.59 pr.

Continued on next page....

Convertible Top Parts

Convertible Top Latch Handles

Convertible Miscellaneous Fittings

Continued from last page....

1941-52 Rubber cushion, convertible top assembly.

Replaces #4116637. Rubber only. Cements to original metal core. One or two pair per car required

1941-48: Top of folding pillar in to groove roof rail - rear.

1941-52: Folding post rest on female hinge of folding top

70-397.......................................$51.79 pr.

1941-48 Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core. Close copy. Convertible coupes.

1942-48 Pad, convertible top folding post. Fastens on lower end with 2 screws. Replaces #4134969. Metal core. Cabriolets.

60-455.......................................$103.69 pr.

1946-50 Mounting cushion, hydraulic pump. Used on models with hydraulic convertible top. Two (2) to three (3) required per car. Replaces #4149788. Convertibles only. 70-852........................................$27.19 ea.

1946-61 Spacer. Folding top power cylinder support. Four (4) used per car. Replaces #4149726.

1946-61: All convertibles. 1957-61: Corvette convertibles.

1949-52 Filler, folding top front roof rail to side roof rail. Replaces #4564058-59. All convertibles.

1949-52 Bumper, folding top rear bow in top compartment. Replaces #4565772. Two (2) required per car. Steel core as original. All convertibles.

60-415........................................$89.99 pr.

1950 Bumper/Cap, folding pillar to side roof rail link. Excellent copy made out of gray rubber. Replaces #4662358. Four (4) piece set only.

70-736......................................$132.69 set

1950-52 Pad, convertible top rest. Full molded with metal core. Replaces #4579174-5. Used on convertibles.

1951-75 Grommet, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Replaces #3698109. Four (4) needed per car for all convertibles.

70-946.........................................$4.89 ea.

1953-57 Bumper, folding top, side roof rail slat iron. Replaces #4615046. Steel core as original. Two (2) or four (4) per car as required for front and center. All convertibles.

1955-57 Bumper, convertible rear quarter drain stop. Set of four (4) bumpers. DC-856......................................$41.95

Car & Truck Number Plates

* Weight must be stamped on plate as original.

Cowl Tag & Paint Rivets

AF-59 1936-72 Passenger Cowl tag & paint tag rivets for 1/4” hole. This rivet was used on Fisher Body cowl tags & paint tags from 1936 and newer. Not used on Car Number ID plates on early cars & trucks.

1947-72 Truck ID plate rivets for 1/4” hole. this rivet was used on the identification plate on the door post or kick panel from 1947 and newer. Not used on Car Number ID plates on early cars & trucks.

SA-17 (1939-41)

AF-12 (1937-39)

DP-33 (1933-36)

DP-37 (1937-38)

1946 - Ricky Olmos, CA

Passenger Car Outside Door Handles & Parts

Truck Outside Door Handles

Door Handle Guards

Passenger Cars

Outside Door Handle Mounting Parts

Trucks

Door Lock Knobs

Passenger Cars (all hard rubber)

Car & Truck Door Handle Grommets & Gaskets

1926-37 Car 1932-37 Truck - grommet for outside door handle ferrule (C-111 order separately). Molded rubber with cloth covering per original. All models.

70-9..............................................$10.39 ea.

1926-37 Car 1932-37 Truck - ferrule for 3/4” outside door handle. Replaces #4003748. Chrome plated brass. (See 70-9 above for grommet). All models.

C-111...........................................$7.95 ea.

1926-37 Car

1932-37 Truck - gasket, door and trunk ferrule. Not an original item but is an excellent fit. Use with C-111 ferrule.

1960-69 Car - gasket, door lock cylinder. Exact design as #4587931. 7/8” ID. Fits most models (including Corvair).

CV-641..........................................$1.00 ea.

Passenger Car

1938-48 Ferrule, outside door handle. Replaces #4082056. Chrome with rubber sleeve. Two (2) piece set for one (1) door.

1938-40: All models

1941-48: Some models (see also C-597 right).

1938-46 Truck

CV-389..........................................$7.95 ea.

1938-48 Car - grommet for outside door handle bezel. Replaces #4082057.

1938-41: Closed models, side dr.

1941-48: SDL, back door.

1938-46: Truck

70-177.........................................$11.79 ea.

1941-48 Car - mounting pad, door lock cylinder. POA #1394712-3 right and left. 1941-42: All closed models. 1946-48: All closed models including Station Wagon.

27-20...........................................$2.75 pr.

1941-48 Car - Ferrule and grommet set, outside door handle. Replaces #4115288. Cadmium plated ferrule with rubber sleeve. All closed models. Two (2) piece set for one (1) door.

C-597..........................................$9.00 set

1926-37 Installation tool, door and trunk ferrule. For all GM cars & trucks using door handle ferrule. (C-111). Without it ferrules are very difficult to install. Buy or rent this tool. You may return the tool, in good condition, and receive a refund of $30.00 - if returned within 30 days of purchase. You must include a copy of your original invoice to receive your refund.

C-662 ........................................$47.50 ea.

Passenger Cars 1949-54 Gasket set, front or rear doors. Four (4) piece set for two (2) handles. Four door models require two (2) sets. Includes trunk lock gasket. 1949-54: All except 1061. 1953-54: SDL rear door only. TN-13.........................................$15.49 set

1955-57 Car - gasket set, outside door handle. Replaces #3719303-4, right and left, front and rear doors. Six (6) piece set for two (2) doors. All passenger models.

L-48...............................................$5.25 set

1958 Gasket set, door handle. Six (6) piece set. 1/32” thick. Top quality rubber. For front doors of Bel Air, Biscayne, Delray and Yeoman 2-door station wagon.

AF-204..........................................$5.99 set

BA-340

DS-1 DS-2

FS-551F

1934 - John Holtham, Australia

Inside Door Handles - Car

Inside Door Handles - Truck

Passenger Car Window Crank Handles

Truck Window Crank Handles

Handle Mounting Screws

Car Vent Window Handles

Truck Vent Window Handles

Windshield Crank Handles

Window Crank Knobs

Inside Door Handle Mounting Parts - Cars

Inside Door Handle Mounting Parts - Trucks

Power Door Lock Actuator - Switch

Door & Window Handle Escutcheons - Car

Door & Window Handle Escutcheons - Trucks

*Escutcheons available in BL=Blue,BK=Black,G=Green,S=Saddle. Add color code to part number when ordering.

Specify right or left when ordering.

Steel Door Shells

Passenger Car

Passenger Car Door Relays

Truck Door Relays

Note: All doors in this section are oversize and special truck freight charges will apply. Please call for truck freight charge estimate.

*Specify right or left when ordering.

Passenger Car Door Bumpers

1925-35 Wedge pads, door aligning. Replaces #4220031 & #3681079 among others.

1925-29: Some models

1932-35: All open cars.

70-1821........................................$30.99 pr.

1928-31 Wedge pad, door aligning dovetail. Goes under bumper retainer. Dimensions as shown. Some models as required.

60-60............................................$12.43 ea.

1928-35 Pad, door jamb (door side bumper). Atwood

#4220091.

1928-31: Most closed bodies

1932-35: Open bodies

70-1155..........................................$13.79 ea.

1930-31 Pad, door jamb. One (1) per door. Open body styles.

60-32...........................................$11.39 ea.

1930-46 Bumper, front and rear body hinge pillar. 1” diameter x 1/4” thick. Held by screw. Steel core. Auxiliary, used only where needed to prevent door rattle.

CV-25.............................................$17.95 pr.

1931-32 Pad, door jamb (door side bumper). Some closed body styles.

70-1158.........................................$16.19 ea.

1932 Pad, door jamb (door side bumper). Appears identical to Atwood #107, #208. All closed and some open bodies.

70-1156...........................................$13.79 ea

1932-35 Open cars. Wedge pads, door aligning w/ metal caps.

3681079........................................$29.95 pr.

1933-36 Pad, door jamb (door side bumper). Many Fisher closed bodies and later open bodies.

70-1159.........................................$13.79 ea.

1933-41 Bumper, door upper hinge post, stiff-backed, retained by screw, mounted on door only.

This pad is found on ALL GM closed car front doors above the upper hinge on the upper radius of the door.

C-131...........................................$10.89 ea.

1935 Pad, door jamb front edge. Upper with metal insert as original. Replaces #4047674 for Master series closed models only.

60-603........................................$88.89 pr.

1936-60 Bumper, door center post, upper. Fits 1/4” hole. 5/16” thick, self-retaining. Most closed bodies as required.

C-136...........................................$2.50 pr.

1937-54 Bumper, door side. Replaces #4076899. Square type held by four (4) screws. Metal core as original. Convertible and hardtop convertible.

70-168........................................$83.29 pr.

1941-58 Bumper, door hinge pillar upper. Replaces #3664645, #3742359. 3/4” diameter, 3/16” thick. For 1/4” hole.

1941-57: Closed except Bel Air sport model. 1958: Station Wagon, Sedan Delivery

33-459..........................................$4.69 ea.

1949-57 Bumper, rubber, anti-rattle. Replaces #4162170. Door window garnish molding, stem type retainer. 5/16” diameter. Two (2) per door.

1949-52: Hardtop and convertible 1953-57: All Sport models

33-516.........................................$2.69 ea.

1949-57 Bumper, door lock post, upper. 1/2” diameter x 1/2” tall less screw. Most models as required.

C-484...........................................$6.49 ea.

1949-60 Bumper, door opening at upper corner, self retaining. 1/2” diameter x 3/8” tall for 1/4” hole. All models except convertible and hardtops.

C-496...........................................$1.95 pr.

1949-75 Bumper pads, door edge, twin retainer style. 3/8” x 7/8” long x (either) 3/8” or 1/2” high. Order by height.

33-1227 (3/8” high)....................$5.49 ea. C-292B (1/2” high).....................$2.50 pr.

1955-57 4-door sedan door bumper

1955-57 4-door hardtop door bumper

1959 Bumper, rear door. Plug style used on many models. Compare with your original. Use as required. Fits all 4-door hardtops and sedans.

35-1030........................................$8.79 ea.

RW-81

1959-62 Bumper, door side. Four (4) heights - please specify by part number which when ordering. Most models as required.

1963-64 Bumper, door, used upper and/or lower as required. Excellent detail using highest quality rubber. Replaces factory #4878385. For full size 2-door only.

33-505...........................................$9.59 ea.

Passenger Car Door Parts

1930-40 Cushion, door check link. Replaces #4110670. For rod type door check. 1” diameter x 3/8” thick with 5/16” hole. All models using rod type door checks.

70-325.........................................$9.29 ea.

1930-40 End stop and cushion, door check link rod. Replaces #4092224. Rubber with embedded steel plate. 5/16” diameter thread. Most models with rod type door checks.

70-326.........................................$18.49 ea.

Truck Door Bumpers

1930-40 Rubber washer, door check link stop. Replaces #4082335. Molded with all original features.

1930-32: All except Sedan

Delivery

1933-40: All models

70-384...........................................$11.39 ea.

1941-48 Check link end nut (rubber bar with steel bar insert). Replaces #4091161. (For round stop nut, see 70-326). 3/4” x 3/4” x 2” threaded 5/16”. All models except Station Wagon. 70-479..........................................$35.29 ea.

1929-46 Wedge pads, door aligning. Replaces #4220031 & 3681079 among others. All models.

70-1821.......................................$30.99 pr.

1929-46 - Wedge pads, door aligning w/ metal caps.

3681079.......................................$29.95 pr.

1930-46 Bumper, front and rear body hinge pillar. 1” diameter X 1/4” thick, held by screw. Steel core. Auxiliary, used only where needed to prevent door rattle.

1932-36 Pad, door jamb. (Door side bumper). Two screw type with metal reinforcing inserts. Replaces #368954 for commercial (except ‘36 low roof cab). 60-581..........................................$21.19 ea.

1936-46 Bumper, door side. Replaces #3681078. 5/8” X 7/8” X 1-7/16”. Four per vehicle. All Commercial.

1947-55 Bumper, dovetail, left hand back door, rubber only. Replaces #3807343. To be used with old casing. Panels and Suburbans.

1947-59 dovetail base for check link arm. Also used on rear doors - Panel trucks ONLY.

60-334 1947-59

Panel rear door check link........$41.19 pr.

1950-55 (1st series) Bumper, door side, for above and below door striker. Rubber, self-retaining type. All commercial.

CH-117...........................................$2.95 pr.

1955-72 (2nd series) Bumper, door pillar, upper and lower. Self-retaining type.

CD-65

CV-293

pr. RW-313