Page 373

Windows and Inserts

Window Frame Installation Instructions SX and HX Style Frames These instructions have been developed during testing of our product, and should be followed for optimum results. BACK CLIP

BACK CLIP

GLASS

NON˛INSULATED DOOR SECTION

SX EXTERIOR FRAME

1/8” SINGLE PANE GLASS

GLASS

NON-INSULATED DOOR SECTION

HX EXTERIOR FRAME

1/8” SINGLE PANE GLASS

Step 1: Place the window frames face down on a clean, fl t and sturdy surface; place the door section face down over the frames, ensuring that all frames are seated properly inside the cutouts. Be sure that the frames are supported from underneath. Step 2: Place the glass into the frames. Step 3: Place the corresponding back clip on the frame, then tap the back clip down lightly so that the first set of teeth is engaged. Repeat for the other sides, respectively, so that the mitered corners align properly. When the entire frame is correctly (but loosely) assembled, use a soft rubber mallet to snap the back clip snug to the door section and the glass.

J-221

info.abbotsford@flexiforce.com · www.flexiforce.com Phone: 877.300.7412 · Fax: 604.854.3576 Revision 3.0

Profile for FlexiForce Americas

FlexiForce Americas Product Catalog Revision 3.0  

FlexiForce Americas Product Catalog Revision 3.0