‘33 Hot Rod Complete Package $19,990 What You Get The Factory Five ‘33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end, wheels, tires and paint. Frame: Complete jig-welded tube frame. Includes all mounts ready to accept small block Ford and 4.6L engines. • Includes full width roll bar powder coated to match • Accommodates either 3- or 4-link suspension Body: Hand laid 3/16” laminate composite body and panels made with vinylester resin. • Driver and passenger doors with molded door liners • Hood with hood liner • Trunk with molded trunk liner • Includes secondary body fasteners assembly. • Adhesive backed and foam weatherstrip • Door edge trim and fasteners • Trunk push on rubber bulb seal • Rubber hood bumpers • Includes multi-adjustable door hinges with bronze bushings with fasteners • Includes hidden trunk hinge kit, hinge support plates and fasteners • Includes hood hinge kit with supports and fasteners and stainless prop rod. Chassis Aluminum Panels: Includes 26 CNC cut, pre-formed 6061-T6 aluminum panels for cockpit, trunk, and engine bay. • 1200 pre-packaged rivets1/8” short & long, 3/16” short & long • Complete cockpit aluminum • 1/8" firewall between engine and passenger compartment Complete Front Suspension: Unequal length a-arm control arms with inboard coil-over shock suspension. Comes complete with all parts and fasteners. • KONI™ brand high performance mono-tube, rod-end shock absorbers • Coil-over kit for KONI™ dampers including spring hat, threaded seat and black powder coated performance springs • Adjustable lower control arms with ball joints and fasteners • Upper tubular control arms with ball joints and fasteners • Grade-8 mounting hardware Factory Five Rear Suspension: 4-Link Suspension • Koni™ brand high performance mono-tube, rod-end shock absorbers • Coil-over kit for Koni™ dampers including spring hat, threaded seat and
16
black powder coated performance springs • Factory Five tubular upper and rear lower control arms, with polyurethane bushings and fasteners Complete Front Brake Kit: • Custom spindles with fasteners • Front hubs, fasteners and dust covers • Front brakes, Ford Mustang 11” front rotors with twin piston PBR calipers, brake pads and fasteners • Master cylinder (listed in pedal box assembly), stainless braided brake line, front and rear with mount clips, banjo bolts and brake line mounting fasteners • Pre-flared 3/16” brake line and brake line T-adapter • OEM Ford Mustang emergency brake handle, fasteners and cable Complete Steering System: Complete steering system using rear steer manual rack from tie rod ends and fasteners to steering wheel and badges. • Manual steering rack with inner and outer tie rod ends and fasteners • Polyurethane steering rack bushing and fasteners • Nickel plated lower steering shaft • 14” banjo steering wheel with boss and ceramic FFR center section and fasteners • Steering system, including flange bearings and fasteners • Custom Ididit steering column with frame mounts Complete Fuel System/Parts: This assembly provides everything from the gas cap to the lines, and is designed to work with carburetors or fuel injection systems. External fuel pump required. • Fuel tank with mounting hardware, vent, gaskets, pick-up and fuel level sending unit • Fuel filler neck and fasteners • Pre-flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high press flex lines and fasteners • Aircraft style brushed aluminum fuel cap with gaskets, ground strap, fuel hose to tank with fasteners • 3/8” line fuel filter, connectors and hose clamps Complete Cooling System/Parts: Electric cooling fan and mounting hardware, radiator hoses, and all necessary fasteners. • Electric cooling fan and mounting kit with connectors • Aluminum radiator with cap and filler neck • Built in transmission cooler in radiator • Stainless steel radiator hose kit includes
adapter kit, fasteners and hose • Overflow tank with cap, hoses, hose clamps and mounting hardware • 185 degree thermostat switch and wiring Engine Accessories: The ‘33 Hot Rod kit is configured to accommodate the engine of your choice. • Engine/Transmission mounts (select 302/351, 4.6L, 5.0L Coyote, SB and LS Chevy), with fasteners • Exhaust, with gaskets and fasteners Driv esh aft: Select from one of seven available driveshafts w/fasteners to match the engine/trans of your choice. • 28 spline driveshaft for T-5, AOD, or Tremec 3550s • 31 spline driveshaft for Tremec TKO 500 or 600s • 31 spline driveshaft for 4.6L or 5.0L Coyote engines w/T-45s or 3650s • 31 spline for LS engine with TKO transmission • 31 spine for SB Chevy with TKO transmission Gauges, Dash, and Electrical Assembly: Complete assembly comes with dash buttons, and indicator lights, switches, and horn. • Custom fit chassis wiring harness • Ignition switch and FFR key, headlight switch, hi-low beam switch, starter solenoid and horn button. • Dash indicators: green, blue dash lights (LED) • Wiring harness mounting kit and hardware including fuse panel mount • Insulated line clip hardware and fasteners and cable ties • Battery ground strap • Speedometer sending unit, pigtail, fasteners and 3.55 speedometer gear • A complete set of 6 Autometer Platinum electronic gauges, with connectors, terminals and installation kit. Includes the following gauges: • Speedometer • Tachometer • Oil Pressure Gauge • Water Temperature Gauge • Fuel Level Gauge • Voltmeter Complete Interior Accessories: The ‘33 Hot Rod kit comes with all the interior accessories you need and want. Bucket seats, door latches, rear view mi rors, and more complement the dash and gauges assembly for a full interior. Check out this full list of standard parts