Page 1

Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 3

*

The First and Only No Worry Hydraulic Flat Tappet Cam & Lifter Sets

Confidence! That’s what you get when you install a New Max Certified Cam and Lifter Set. A superior product with quality control goes far beyond, including batch testing and verification on an Adcole 911NT. The Adcole is the premier measurement equipment for camshafts in the world. So you know you’re getting the finest camshaft for your application available. Each set includes a performance hydraulic camshaft, a set of matching hydraulic flat tappet lifters and a bottle of Max ZPM oil additive for break-in (Max ZPM must be added to every oil change). So what happens if you still have a cam damaging event?...You’re Covered! We will replace your Max Certified Cam & Lifter Set at no charge for up to five years from date of original purchase. Just completely fill out the supplied warranty card and return along with your camshaft, lifters and the original receipt. No Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC312481-11

NA

AMERICAN MOTORS V8

MC311451-08

NA

Duration Advertised IN EX

• 290-401 1966-1991

269

1200-5200

CHEVROLET SMALL BLOCK

MC112001-14 MC112011-11

MC110931-11

MC110991-08 MC110951-10 MC112431-08 MC110041-10

MC112001-14DL 4 MC112011-11DL 4

MC110931-11DL 4

MC110991-08DL 4 MC110951-10DL 4 MC112431-08DL 4 MC110041-10DL 4

Cam Notes: master note list on page 260

267

1800-5800

269

255 261

800-4800

267

1100-5200

275

1700-5700

275

2000-6000

277

2200-6200

279

1800-6000

215

215

Valve Lift w/OE Ratio Rockers IN EX

.475

Lobe Separation Intake Angle Centerline

.475

111

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

267

220

220

.540

261

201

207

.410

107

207

207

.420

213

213

.450

221

221

.470

.420

114

110

Hyd. Hyd.

107

Hyd. Hyd.

.420

111

107

.450 .470

108

104

Hyd. Hyd.

104

Hyd. Hyd.

111

Good low & mid-range horsepower. Needs 4 barrel & headers.

285

221

231

.470

.470

110

Street & Strip. Needs 4 barrel, headers & lower gears.

277

223

223

.450

.450

108

Hot Street cam. 4 barrel & headers recommended.

289

225

235

.465

.488

Fair idle, Hot Street & mild Bracket Racing.

Fax: 1300 350 454

1

Hyd. Hyd.

Strong low & mid-range torque & horsepower.

275

Hyd. Hyd.

104

Good idle, Street, Off-Road, Towing. Good torque.

267

Notes

108

Smooth idle, Strong low end. High vacuum, good fuel economy.

261

Valve Lash IN EX

.540

Classic performance idle, strong mid range torque & power.

1 Stock (O.E.) valve springs cannot be used. 4 Direct Lube Lifters Included in Cam & ”Direct Lube” Lifter (DL) Sets. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

Phone: 1300 350 351

* Max Certified warranty applies to Max Certified Cam & Lifter Sets only. Max Certified 5 year warranty starts from the original date of purchase. Any and all replacements are covered for the remainder of the original warranty as long as any or all repairs or adjustments to end user’s equipment, determined by Howards Cams, is completed. Max Certified warranty covers camshaft and lifter set only. Warranty does not cover removal/installation cost, damage to related components, cost incurred due to down time, towing or shipping. Warranty is non-transferable. Warranty card must be completed for credit to be applied.

Duration @ .050” IN EX

• 262-400 1955-1998

600-4800

worries that you may have overlooked something that damaged your new Max Certified camshaft. Didn’t notice that retainer to seal clearance wasn’t enough?...Covered! Valve spring coil bind...Covered! Have a problem with your oiling system that damages the cam?...Covered! While installing the cam, you drop it and it breaks in two?...Covered! So what are you waiting for? Isn’t it time to make a real performance change to your engine? With Max Certified Cam & Lifter Sets you’re covered! For extra insurance most kits available with Direct Lube lifters.

110

106 106

1,15

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

1 1 1

Max Certified Cam & Lifter Sets continued on page 4

Web: www.fabre.com.au

3

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 4

CAMSHAFTS

MAX CERTIFIED CAM & LIFTER SETS (cont.)

Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC110041-12

MC110041-12DL 4

CHEVROLET SMALL BLOCK

MC110961-08 MC112031-08 MC112141-10 MC110971-08

MC110961-08DL 4 MC112031-08DL 4 MC112141-10DL 4 MC110971-08DL 4

Duration Advertised IN EX

• 262-400 1955-1998 (cont.)

279

1800-6000

285

2000-6200

285

2800-6400

285

2000-6000

289

2600-6400

CHEVROLET BIG BLOCK MARK IV

MC122501-12 MC120021-12 MC120931-12 MC120031-12 MC122521-15 MC120941-11

MC122501-12DL 4 MC120021-12DL 4 MC120931-12DL 4 MC120031-12DL 4 MC122521-15DL 4 MC120941-11DL 4

259

800-4000

259

800-4000

267

1500-5000

269

1600-5200

275

1800-5400

MC720031-12 MC722241-08

NA

MC210021-12 MC210031-12 MC210931-10 MC210951-10 MC210041-12 MC210961-08

267 269

1400-5200

NA

289

225

235

289

2600-6400

MC210031-12DL 4 MC210931-10DL 4 MC210951-10DL 4 MC210041-12DL 4 MC210961-08DL 4

259

1000-4500

267

1500-5400

269

1500-5200

275

2000-6000

279

2500-6200

285

2600-6300

.465

.488

285

231

231

.470

.470

Lobe Separation Intake Angle Centerline

112

108

108

Hot Street/Brackets, broad power range, strong top end.

285

231

231

.480

.480

108

Fair idle. Broad power band. Works well in heavy vehicles.

289

231

235

.480

.488

110

289

235

235

.470

263

205

209

.476

205

215

.476

213

213

.510

215

225

.516

221

235

.504

Hyd. Hyd.

225

225

.527

112

108

Hyd. Hyd.

1

108

Hyd. Hyd.

1

.516

112

.510

112

.527

112

.504

115

.527

213

213

.450

.450

Super low & mid-range performance. Good idle.

277

215

223

.445

.465

108 108 111

235

235

.488

205

215

.448

213

223

.475

107

Hyd. Hyd.

1 1

112

108

215

215

.475

221

231

.501

104

Hyd. Hyd.

.480

112

108

Hyd. Hyd.

1

Hyd. Hyd.

1

.496

112

.475

110

.501

110

Street & Strip. Needs 4 barrel, headers & low gears.

285

225

231

.496

.512

112

Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

285

231

231

.501

1

108

Strong low & mid-range, fuel efficiency & driveability.

285

Hyd. Hyd.

1

.488

Broad power band. Excellent in Hot Street & Marine.

269

1

111

Great low & mid-range. Smooth idle. Good in PUs & RVs.

277

Hyd. Hyd.

1

Hyd. Hyd.

Runs strong 3,500 & up. 9.5+ comp., auto OK with gears.

267

Hyd. Hyd.

1

107

Good idle & throttle response. Needs 4 barrel & good exhaust.

289

Hyd. Hyd.

1

111

Fair idle. Strong mid-range. Needs 4 barrel & headers.

267

1

.476

Fair idle. Excellent in Performance & Marine applications.

279

1

Hyd. Hyd.

Great low & mid-range torque. OK in heavy vehicle.

289

Hyd. Hyd.

106

104

1

104

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

279

1

108

Exceptional low end torque. Good in PUs, 4x4s & RVs.

267

Hyd. Hyd.

.470

Great low end torque replacement cam, good fuel economy.

269

Notes

Hyd. Hyd.

Lopey idle. Pro-Street & Bracket Racing profile. 9.5:1+ CR, 2700+ stall. • 396-502 1965-1996

Valve Lash IN EX

104

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

MC210021-12DL 4

Valve Lift w/OE Ratio Rockers IN EX

Fair idle, Hot Street & mild Bracket Racing.

• 383-440 1959-1980

1000-5000

NA

FORD SMALL BLOCK

279

1800-5400

CHRYSLER BIG BLOCK B/RB

MC720931-11

Duration @ .050” IN EX

.501

108

Broad power range, extra performance in smaller engine.

108

Hyd. Hyd.

106

Hyd. Hyd.

106 108 104

Hyd. Hyd. Hyd. Hyd.

1 1 1 1

Cam Notes: master note list on page 260 1 4

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

4

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 5

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

MAX CERTIFIED CAM & LIFTER SETS (cont.)

Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC220021-12

MC220021-12DL 4

FORD SMALL BLOCK

MC220931-10 MC220041-12 MC220951-10 MC220051-12 MC220961-08

MC231031-10 MC230041-12

FORD FE

MC250021-11

MC220041-12DL 4 MC220951-10DL 4 MC220051-12DL 4 MC220961-08DL 4

MC230041-12DL 4

MC240041-12

NA

275

2000-6000

277

2400-6600

285

2600-6800

267

1600-5000

279

2400-6400

267

• 429-460 1968-1995

MC242201-10DL 4 MC240041-12DL 4 NA

MC510991-08

PONTIAC V8

269

1600-5000

273

1500-5400

279

1800-5600

267

1200-5500

275

1500-5800

• 265-455 1955-1981

MC410961-08

267

205

NA

NA NA

Cam Notes: master note list on page 260

267

1500-5500

267

1500-5800

285

2200-6200

213

Valve Lift w/OE Ratio Rockers IN EX

.448

.480

Lobe Separation Intake Angle Centerline

269

215

215

.475

.475

Lopey idle. Excellent Street Performance cam.

275

221

221

.475

.475

221

231

.501

.501

Hyd. Hyd.

1

112

108

Hyd. Hyd.

1

110 110

Street & Strip. Needs 4 barrel, headers & low gears.

289

223

235

.496

.520

112

Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

285

231

231

.501

.501

108

.496

110

Broad power range, extra performance in smaller engine.

267

213

213

.496

106 106 108 104 106

Fair idle, good low & mid-range torque. Needs 4 bbl. & headers.

289

225

235

.536

.542

112

108

Lopey idle, moderate performance. Higher CR is recommended.

263

209

209

.490

.490

Notes

108

Good idle & throttle response. Ok with small blower.

285

Valve Lash IN EX

112

Great low & mid-range. Smooth idle. Good in PUs & RVs.

111

107

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

277

213

223

.525

215

215

.514

219

219

.496

225

235

.536

1

Hyd. Hyd.

1

Hyd. Hyd.

213

213

.480

.514

111

107

Hyd. Hyd.

1

Hyd. Hyd.

1

.496

110

.562

112

.480

111

Good low end & mid-range. Will work well in jet boats.

275

221

221

.501

213

213

.450

Hyd. Hyd.

107

Hyd. Hyd.

1

107

213

223

.450

108

104

Hyd. Hyd.

.450

111

107

Hyd. Hyd.

1

Hyd. Hyd.

1

.450

112

Super low & mid-range torque. Excellent driveability.

285

231

231

.480

1

.501

Good idle, Strong low & mid-range torque.

277

1

106

Good low & mid-range horsepower. Needs 4 barrel & headers.

267

1

Hyd. Hyd.

Strong mid-range. Needs 4bbl., headers & medium stall.

267

1

108

Good idle, strong bottom end. Great daily usage cam.

289

1

112

Good idle & throttle response with 4bbl & good exhaust.

273

1

.525

Good idle. Excellent Street Performance dual pattern cam.

269

1

Hyd. Hyd.

Smooth idle, increased low end torque. Great in PUs or other heavy vehicles.

• 260-455 1967-1990

NA

MC410021-12

263

1400-5200

MC240931-11DL 4

MC510931-11

1 4

275

1200-5400

1000-4400

NA

OLDSMOBILE 39° V8

MC410931-11

269

1400-5200

• 352-428 1963-1977

FORD BIG BLOCK

MC242201-10

259

1000-5000

Duration @ .050” IN EX

• 351C-351M-400 1970-1983

MC231031-10DL 4

MC250031-12 MC240931-11

• 351W 1969-1996

MC220931-10DL 4

FORD CLEVELAND/M

Duration Advertised IN EX

.480

108

108 104

Hot Street, improved mid-range. Best with 9.5:1+ comp., 4-barrel.

Hyd. Hyd.

1

1

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

5

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 6

CAMSHAFTS

• • • •

High Grade Race Quality Cores Dedicated Precision CNC Cam Grinders 100% Rockwell Checked Most Shipped in Hard Protective Packaging

All Howards™ Cams use the highest-grade race quality cores available. All hydraulic and mechanical flat tappet camshafts are 100% Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Howards™ Cams are manufactured on dedicated high precision CNC cam grinding machines. Most Howards™ Cams are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.

Max Certified™ Camshaft & Lifter Sets with 5-Year “No Fault” Warranty

The only hydraulic flat tappet Cam and Lifter sets to offer a 5 year “No Fault” warranty. An industry first and only. So what happens if you still have a cam damaging event?...You’re Covered! We will replace your Max Certified Cam & Lifter Set at no charge for up to five years from date of original purchase. No worries that you may have overlooked something that damaged your new Max Certified camshaft. For more information see page 3.

American Muscle™ Hydraulic and Mechanical Flat Tappet Camshafts

Near duplicates of some of the most iconic original equipment camshaft grinds from the ‘60s to the early ‘70s. We took these fantastic grinds and made slight changes to the ramp speeds and minor duration changes to give you better reliability and horsepower. You still get the same throttle response and of course the original style exhaust rumble. Great cams for restoration projects and perfect for the street machines. Grinds available for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac.

Street Force™ Hydraulic Flat Tappet Camshafts

Designed for the street performance enthusiast. They feature true street performance with little or no added maintenance. These grinds feature lobes designed to be easy on the valvetrain, and add useable torque, horsepower and throttle response. They also have 112° lobe separations to help maintain vacuum. Note: some applications may require a vacuum canister or pump. Street Force™ I cams are great for engines with minor or no additional improvements. A good dual plane intake and dual exhaust is great for additional performance. Street Force™ 2 are designed for engines with improved intake and exhaust. Ignition improvements along with 16001800 torque converter really wakes this combo up. Street Force™ 3 needs a street 2200-2500 stall converter, improved intake and dual exhaust. 3.20 to 3.90 gear ratio and a good ignition system will give you additional performance. Street Force™ 4 requires an improved intake and exhaust. A good street 2800-3200 converter is also needed. The addition of small tube headers, a good ignition and lower gears makes this combination a lot of fun. Some items are not legal for sale or use on any pollution controlled motor vehicle

6

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 7

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CAM & LIFTER SETS

More performance, less money! Whether your goal is to boost low-end torque, increase fuel economy, street, strip or all out competition, you’ll find the ideal answer right here. Computer designed. Each kit includes a Howards™ performance camshaft and a matching set of Howards™ premium lifters. Cam and lifter sets are listed with a “CL” prefix. • Hydraulic Flat Tappet Cam & Lifter Sets • Hydraulic Retro-Fit Roller Cam & Lifter Sets • Mechanical Flat Tappet Cam & Lifter Sets • Mechanical Flat Tappet Cam & Direct Lube™ Lifter Sets

Rattler Cams™ Hydraulic Flat Tappet and Hydraulic Roller Camshafts

Rattler cams are for street enthusiasts who want the classic exhaust sound but also want true performance to go with it. These camshafts offer performance that just doesn’t thump around. They give you the performance and throttle response you expect from a performance cam. Don’t let the others fool you, sound is not everything. If you want both sound and performance, you need a Howards Cams Rattler™. The best of both worlds. Note: To get the best exhaust note, you should use a good dual exhaust system without a cross-over. A cross-over will add minor performance, but mellow the exhaust tone. Rattler™ Choppy idle. Great for high performance street, stock converter ok, best with 1800+ converter and gears. Big Mama Rattler™ Lopey idle. Performance street or street/strip applications. Needs 9.0:1 compression, 2500+ stall, good intake and exhaust. Best with lower gears. Big Daddy Rattler™ Rough idle. Pro street or street/strip. Needs 9.5:1 compression, 2800+ stall, good intake, gears and exhaust.

BOOST™ Cams for Forced Induction Applications

Boost is a series of camshafts developed specifically for forced induction applications. If its a small street supercharger, or 8-71, to a dual turbo setup, Boost is for you. Developed with specific high intensity lobes to give you the maximum power and overall performance with a wide power band. Designs for the daily street car to the weekend warrior. Hydraulic flat tappet and hydraulic roller grinds are available for blower and turbo applications. Custom grinds are also available for high boost applications.

Big Bottle™ Cams for Nitrous Oxide Applications

Designed specifically for nitrous oxide applications. These camshafts have camshaft lobes matched to the application to give you the best performance and horsepower. Most applications are designed for good power and throttle response without the nitrous, but give you big gains when the nitrous oxide is engaged. Grinds available for small plate systems to big multi-stage port injected systems. 7

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 8

CAMSHAFTS

AMERICAN MOTORS L6

• 199-258/4.0L 1964-1995

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

330111-12

Cam & Lifter Set Part No.

CL330111-12

AMERICAN MOTORS L6

Duration Advertised IN EX

257

1000-4400

330111-10

331021-12 330991-08 339991

Cam & Lifter Set Part No.

CL330111-10

CL331021-12 CL330991-08 NA

AMERICAN MOTORS L6

203

209

Duration Advertised IN EX

257

1000-4400

269

1400-5000

275

1800-5600

263

Duration @ .050” IN EX

320111-12

Cam & Lifter Set Part No.

CL320111-12

203

209

269

215

215

AMERICAN MOTORS L6

275

Cam Part No.

320111-10 329991

Cam & Lifter Set Part No.

CL320111-10

221

221

NA

263

Duration @ .050” IN EX

Duration Advertised IN EX

257

108

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.60 Rockers IN EX

.443

.448

.475

.475

Lobe Separation Intake Angle Centerline

110 112

106 108

.501

.501

108

104

Hyd. Hyd. Hyd. Hyd.

1

203

209

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.60 Rockers IN EX

.443

.448

Lobe Separation Intake Angle Centerline

112

108

Hyd. Hyd.

263

Duration @ .050” IN EX

203

209

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.60 Rockers IN EX

.443

.448

Lobe Separation Intake Angle Centerline

112

Good idle, Mild Street performance, strong low end torque.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

108

1

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

• 4.0L FI 1996-2006

1000-4400

112

Hydraulic Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

Hydraulic Flat Tappet Camshafts

.448

Valve Lash IN EX

Fair idle, Hot Street, aftermarket induction & headers a must. Not for Fuel Injection.

• 4.0L FI 1996-2006

257

.443

Lobe Separation Intake Angle Centerline

Moderate Street with headers and better carb/intake. Fuel Injection.

Custom Grind Camshaft

1000-4400

Valve Lift w/1.60 Rockers IN EX

Mild Street performance, strong low end torque.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•5•3•6•2•4

Street Force™ 1, Mild Street performance, strong low end torque. Fuel Injection.

• 199-258/4.0L 1964-1995

Hydraulic Flat Tappet Camshafts Cam Part No.

263

Duration @ .050” IN EX

Hyd. Hyd.

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

8

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 9

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

AMERICAN MOTORS L6

• 199-258/4.0L 1964-1995

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

91711-12 3

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

NA

Valve Springs

Steel Titanium Retainers Retainers

98511-12 25 97110-12

AMERICAN MOTORS L6

NA

Valve Locks

Lifters

Rev Kit

91711-12 3

NA

NA

91711-12 3 91711-12 3 91711-12

NA NA

NA

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

93045-12 93321 25

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98511-12 25 97110-12

NA

93045-12 93321 25

NA

98511-12 25 97110-12

NA

93045-12 93321 25

98511-12 25 97110-12

--

--

AMERICAN MOTORS L6

NA

--

NA

93045-12 93321 25

--

--

--

NA NA

NA

Lifters

91711-12 3

Rev Kit

NA

NA

Valve Springs

NA

AMERICAN MOTORS L6

Steel Titanium Retainers Retainers

NA

NA

Valve Locks

Lifters

Rev Kit

91711-12

NA

NA

91711-12 3

NA

NA

NA

NA

NA

NA NA

NA

NA NA

NA

NA

NA

NA

NA

NA NA

NA NA

NA NA NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

• 4.0L FI 1996-2006

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

• 4.0L FI 1996-2006

Street Force™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

• 199-258/4.0L 1964-1995

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Seals

Valve Springs

NA

NA

Steel Titanium Retainers Retainers

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

9

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 10

CAMSHAFTS

AMERICAN MOTORS V8

• 290-401 1966-1991

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC311451-08

NA

MC312481-11

NA

AMERICAN MOTORS V8

Duration Advertised IN EX

269

1200-5200

267

1800-5800

269

Duration @ .050” IN EX

215

215

310101-12 311101-12

Cam & Lifter Set Part No.

CL310101-12

267

CL311101-12

AMERICAN MOTORS V8

269

1200-5200

220

220

310011-10 312481-11

314131-10 311451-08

310021-14 310031-12 315011-08 319991

Cam & Lifter Set Part No.

CL310011-10

CL312481-11

CL314131-10 CL311451-08

CL310021-14

CL310031-12 CL315011-08 NA

269

Duration @ .050” IN EX

269

1200-5200

261

1400-5400

267

1800-5800

277

1500-5500

289

2200-6200

291

2600-5400

107

.540

.540

108

205

215

104

Cam Notes

Hyd. Hyd.

1,15

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

.448

.474

Lobe Separation Intake Angle Centerline

112

108

279

215

225

.474

.496

112

108

1

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

Duration Advertised IN EX

257

800-4800

111

Valve Lash IN EX

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

• 290-401 1966-1991

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration Advertised IN EX

259

.475

Classic performance idle, strong mid range torque & power.

• 290-401 1966-1991

800-4800

.475

Lobe Separation Intake Angle Centerline

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.60 Rockers IN EX

269

Duration @ .050” IN EX

203

215

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

.443

.475

Lobe Separation Intake Angle Centerline

110

269

215

215

.475

.475

111

267

214

220

.527

Good idle, Strong Street performance.

267

220

220

.540

.540 .540

277

223

223

.480

.480

297

235

243

.520

.541

106

Hyd. Hyd.

1,15

Hyd. Hyd.

1

104

Hyd. Hyd.

112

107

Hyd. Hyd.

114

110

Strong low & mid-range torque & horsepower. Manual or auto with stall.

299

244

252

.604

.629

108

104

Rough idle, better with 390 & larger ci. Needs 2000+ stall & gears.

Custom Grind Camshaft

1

108

Classic performance idle, strong mid range torque & power. Strong low & mid-range torque & horsepower.

Hyd. Hyd.

Hyd. Hyd.

107

110

Cam Notes

106

Smooth idle, improved low end. High vacuum, good fuel economy. Good idle, Street, Off-Road, Towing. Good fuel efficiency.

Valve Lash IN EX

Hydraulic Flat Tappet Special Order Camshaft.

Hyd. Hyd.

Hyd. Hyd.

1,15 1

1,15 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

10

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 11

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

AMERICAN MOTORS V8

• 290-401 1966-1991

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91711 3

NA

NA

91711 3

NA

NA

Valve Springs

98445 25 98445 25

AMERICAN MOTORS V8

Steel Titanium Retainers Retainers

97110 97110

NA NA

Valve Locks

93045 93045

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

95205

93321 25

NA

Lifters

Rev Kit

91711 3 91712

NA

NA

91711 3 91712

NA

NA

Valve Springs

98445 25 98445 25

AMERICAN MOTORS V8

Steel Titanium Retainers Retainers

97110 97110

NA NA

Valve Locks

93045 93045

Lifters

Rev Kit

91711 3 91712

NA

NA

91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 91712

NA NA NA NA NA NA

NA

Valve Springs

NA

98445 25

NA

98445 25

98445 25

NA

98445 25

NA

98445 25

NA

98445 25

NA

98445 25

--

NA NA

NA NA

NA NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

95205

93321 25

NA

NA

95205

Fuel Pump Distributor Pushrod Gear

NA NA

NA NA

Timing Set

NA NA

• 290-401 1966-1991

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

95205

Timing Set

• 290-401 1966-1991

Street Force™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

Fuel Pump Distributor Pushrod Gear

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

95205

97110

NA

93045

93321 25

97110

NA

93045

93321 25

97110 97110 97110 97110 97110 --

NA NA NA NA NA --

93045 93045 93045 93045 93045 --

93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA

NA

NA NA NA NA NA NA

NA

95205 95205 95205 95205 95205 95205 NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA NA NA

NA

NA NA NA NA NA

NA

Timing Set

NA NA NA NA NA NA NA

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

11

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 12

CAMSHAFTS

AMERICAN MOTORS V8

• 290-401 1966-1991

Mechanical Flat Tappet Camshafts Cam Part No.

312012-08 310812-08 310342-08 319992

Duration Advertised IN EX

Cam & Lifter Set Part No.

CL312012-08

277

2800-6200

CL310812-08

276

3000-6500

CL310342-08

289

3500-7000

NA

BUICK V6 EVEN FIRE

569991

NA

531911-12

NA

530011-10 530561-08 530991-08 539991

280

248

NA

NA NA

NA

.544

295

254

.549

252

.571

.576

260

.587

Duration @ .050” IN EX

ROVER

Duration Advertised IN EX

269

1400-4400

269

1500-4600

275

2000-5000

108

.592

104 104

.022 .016

108

104

.022

Firing Order: 1•6•5•4•3•2

Valve Lift w/1.55 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

257

108

Valve Lash IN EX

.022 .016 .022

Cam Notes

1

1,34 1 1

Mechanical Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

1000-4000

Lobe Separation Intake Angle Centerline

Rough idle, Great mid-range & top end performer. 3200+ stall & gears needed.

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts Cam & Lifter Set Part No.

246

Valve Lift w/1.60 Rockers IN EX

Hot Street/Bracket, powerful through entire rpm range. 10.0:1+ CR, 3000+ Stall.

• 215-300-340 1961-1967

Cam Part No.

242

• 181-252 1977-1989

Cam & Lifter Set Part No.

BUICK/OLDSMOBILE

281

Firing Order: 1•8•4•3•6•5•7•2

Street/Strip. Needs 10.0+ CR, 2500+ stall & gears.

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration @ .050” IN EX

269

215

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

215

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

.443

.475

Smooth idle, Strong low end performance.

269

Valve Lash IN EX

1

• 215-240-256 1968-1994

Duration @ .050” IN EX

203

Lobe Separation Intake Angle Centerline

215

.475

.475

Lobe Separation Intake Angle Centerline

110 112

106 108

Hyd. Hyd.

Good idle, Improved low & mid range power. Great all around performance.

275

215

221

.475

.501

108

Good idle, Strong low & mid-range torque & horsepower.

275

221

221

.501

.501

Fair idle, strong mid-range performance.

Custom Grind Camshaft

108

Hydraulic Flat Tappet Special Order Camshaft.

104 104

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

1 1 1 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 34 Provisions for increased oiling recommended.

12

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 13

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

AMERICAN MOTORS V8

• 290-401 1966-1991

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91715 3 91718

NA

NA

91715 3 91718 91715 3 91718 91715 91718

NA NA

NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98445 25 97128 10 97126 10 9308010 93321 25

NA

98445 25 97128 10 97126 10 9308010 93321 25

98445 25 97128 10 97126 10 9308010 93321 25

--

--

BUICK V6 EVEN FIRE

--

--

--

--

91312-12

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

Valve Locks

Valve Seals

--

BUICK/OLDSMOBILE

Valve Springs

Steel Titanium Retainers Retainers

98111-12 97112-12

NA

• 215-300-340 1961-1967

93040-12

ROVER

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91311

NA

NA

98341 25

91311

NA

NA

98341 25

91311

91311 91311

NA

NA NA

NA

NA --

Rocker Arms

Stud Girdles

Pushrods

NA

NA

95013

NA NA

NA

NA NA

NA

95013 95013 --

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA

NA NA

Timing Set

NA NA NA

NA

• 181-252 1977-1989

Hydraulic Flat Tappet Camshaft Components Lifters

Valve Seals

Valve Springs

98341 25

Steel Titanium Retainers Retainers

98341 25 --

NA

NA

NA

NA

NA NA --

NA NA --

--

Rocker Arms

NA

Stud Girdles

NA

Pushrods

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

NA

NA NA --

Timing Set

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

• 215-240-256 1968-1994

Valve Locks

NA

Fuel Pump Distributor Pushrod Gear

NA NA NA --

NA NA NA

NA

NA NA NA

NA

NA NA NA --

NA

NA

NA

NA

NA NA

NA

NA NA

NA

NA NA NA NA

NA

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

13

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 14

CAMSHAFTS

BUICK/OLDSMOBILE

• 215-300-340 1961-1967

Mechanical Flat Tappet Camshafts Cam Part No.

Cam & Lifter Set Part No.

539992

BUICK

NA

Duration @ .050” IN EX

Duration Advertised IN EX

Duration @ .050” IN EX

540011-12

540931-10 540731-12 549991

Cam & Lifter Set Part No.

CL540011-12

257

800-4800

CL540931-10 CL540731-12 NA

269

1100-5000

275

1800-5500

269

203

215

549992

NA

269

215

215

277

221

223

Custom Grind Camshaft

Custom Grind Camshaft

Duration @ .050” IN EX

550101-12 550121-12

CL550101-12

CL550121-12

.443

Lobe Separation Intake Angle Centerline

.475

112

.475

.475

110

.501

.496

112

Duration Advertised IN EX

259

1000-5000

269

1200-5200

269

Duration @ .050” IN EX

205

215

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

108 106 108

Hyd. Hyd.

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

.448

.474

Lobe Separation Intake Angle Centerline

112

108

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

279

215

225

.474

.496

112

108

1

Valve Lash IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

1

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Mechanical Flat Tappet Special Order Camshaft.

Street Force™ Hydraulic Flat Tappet Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.60 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

Valve Lash IN EX

Firing Order: 1•8•4•3•6•5•7•2

Hot Street with high compression, aftermarket intake & headers.

• 400-430-455 1967-1976

Cam Part No.

Lobe Separation Intake Angle Centerline

Good idle, Performance Street with modified intake & exhaust.

Mechanical Flat Tappet Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.60 Rockers IN EX

Smooth idle, Street, strong low end torque. Good fuel economy

• 350 1968-1980

Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Mechanical Flat Tappet Special Order Camshaft.

• 350 1968-1980

Cam Part No.

BUICK

• 215-240-256 1968-1994

Duration Advertised IN EX

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts

BUICK

ROVER

1

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

14

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 15

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

BUICK/OLDSMOBILE

• 215-300-340 1961-1967

ROVER

Mechanical Flat Tappet Camshaft Components Lifters

91415

BUICK

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91311 3

NA

NA

91311 3 91311

BUICK

NA

NA

NA

NA

NA

Valve Springs

98411

98411

Steel Titanium Retainers Retainers

NA

NA

NA

NA

98411

--

NA

--

--

NA

Valve Locks

91415

BUICK

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

93321 25

NA

NA

NA

--

NA

93321 25

NA

93321 25

NA

--

--

NA

NA NA

NA

NA

NA

NA

NA NA

NA NA

NA

NA

NA

NA

NA NA

NA NA

NA NA NA

--

NA

NA

NA

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

--

Fuel Pump Distributor Pushrod Gear

Timing Set

--

NA

NA

NA

NA

NA

NA

NA

• 400-430-455 1967-1976

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91311 3

NA

NA

91311 3

NA

• 350 1968-1980

Mechanical Flat Tappet Camshaft Components Lifters

Valve Seals

• 350 1968-1980

Hydraulic Flat Tappet Camshaft Components 91311 3

• 215-240-256 1968-1994

NA

NA

Valve Springs

98412

98412

Steel Titanium Retainers Retainers

NA NA

NA NA

Valve Locks

NA NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

93321 25

NA

NA

NA

NA NA

NA NA

NA NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

15

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:14 AM Page 16

CAMSHAFTS BUICK

• 400-430-455 1967-1976

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

558021-09 558061-09 558101-09

BUICK

Duration Advertised IN EX

Cam & Lifter Set Part No.

CL558021-09

281

1800-5600

CL558061-09

289

2000-5900

CL558101-09

297

2400-6200

Cam Part No.

550931-12 550991-08 550241-10 550441-10 550451-08

BUICK

Cam & Lifter Set Part No.

CL550931-12

269

CL550991-08

275

1200-5200

CL550241-10

279

1500-5500

CL550441-10 CL550451-08 NA

289

2000-6000

294

2400-6400

269

Duration @ .050” IN EX

215

559992

215

NA

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

.475

.475

Lobe Separation Intake Angle Centerline

112

Good idle, Mild Street performance, strong low end torque.

275

221

221

.501

.501

Fair idle, Performance Street, Strong torque curve.

285

225

231

.496

.501

108 110

Fair idle, Hot Street, needs modified intake & exhaust.

295

235

241

.520

.501

Nice idle, Street/Strip for 430+ ci., monster torque.

Valve Lash IN EX

Cam Notes

301

241

247

.536

.544

110

108

Valve Lash IN EX

Cam Notes

104

Hyd. Hyd.

1

106

Hyd. Hyd.

108 106

104

Hyd. Hyd.

1

Hyd. Hyd.

1 1

Hyd. Hyd.

1

Rough idle, Street/Strip, needs 2500+ stall, aftermarket intake & headers.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

• 400-430-455 1967-1976

Cam & Lifter Set Part No.

Lobe Separation Intake Angle Centerline

305 243 251 .512 .528 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Mechanical Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.60 Rockers IN EX

297 235 243 .501 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

Duration Advertised IN EX

1000-5000

Firing Order: 1•8•4•3•6•5•7•2

289 227 235 .501 .501 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

• 400-430-455 1967-1976

Hydraulic Flat Tappet Camshafts

559991

Duration @ .050” IN EX

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

Mechanical Flat Tappet Special Order Camshaft.

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

Cam Notes

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

16

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 17

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

BUICK

• 400-430-455 1967-1976

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91311 3

NA

NA

91311 3

91311 3

BUICK

NA NA

Valve Springs

NA

98438 25

NA

98438 25

Steel Titanium Retainers Retainers

98438 25

NA

NA

NA

NA

NA

Valve Locks

NA

Lifters

Rev Kit

91311 3

NA

NA

98438 25

NA

NA

NA

98438 25

NA

NA

91311 3 91311 3 91311

BUICK

91415

Pushrods

93321 25

NA

NA

NA

93321 25

NA

93321 25

NA

NA

NA

NA

NA

NA NA

98412

Steel Titanium Retainers Retainers

NA

98438 25

NA

NA

Valve Springs

NA

98438 25

--

NA

--

--

NA

NA

Valve Locks

NA NA

NA NA

NA NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

93321 25

NA

NA

NA

NA

93321 25

NA

NA

NA

NA

--

--

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA

NA

Timing Set

NA NA NA

93321 25

93321 25 93321 25

NA NA NA NA

NA NA NA NA

NA NA NA NA

--

NA

NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA NA

NA NA NA NA

Timing Set

NA NA NA NA NA NA

• 400-430-455 1967-1976

Mechanical Flat Tappet Camshaft Components Lifters

Stud Girdles

• 400-430-455 1967-1976 Valve Spring, Retainer & Lock Kit

91311 3

Rocker Arms

NA

Hydraulic Flat Tappet Camshaft Components 91311 3

Valve Seals

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

--

NA

NA

NA

Fuel Pump Distributor Pushrod Gear

NA

NA

Timing Set

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

17

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 18

CAMSHAFTS CADILLAC

• 365-390 1956-1962

Hydraulic Flat Tappet Camshafts Cam Part No.

529996

CADILLAC

Cam & Lifter Set Part No.

NA

529998

CADILLAC

Duration @ .050” IN EX

Duration Advertised IN EX

Duration @ .050” IN EX

Custom Grind Camshaft

• 390-429 1963-1967

Cam & Lifter Set Part No.

NA

Custom Grind Camshaft

• 368-425-472-500 1968-1984

520101-12 522121-12

CADILLAC

Cam & Lifter Set Part No.

CL520101-12 CL522121-12

Duration Advertised IN EX

269

1000-5000

279

1200-5200

279

Duration @ .050” IN EX

215

225

528021-09 528061-09 528101-09

CL528021-09

289

CL528061-09 CL528101-09

Duration Advertised IN EX

281

1800-5600

289

2000-5900

297

2400-6200

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

Hyd. Hyd.

Firing Order: 1•5•6•3•4•2•7•8

Valve Lift w/1.65 Rockers IN EX

.490

.512

Lobe Separation Intake Angle Centerline

112

108

225

235

.512

.517

112

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

• 368-425-472-500 1968-1984 Cam & Lifter Set Part No.

Lobe Separation Intake Angle Centerline

Hyd. Hyd.

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.60 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Hydraulic Flat Tappet Special Order Camshaft.

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration Advertised IN EX

Duration @ .050” IN EX

Firing Order: 1•5•6•3•4•2•7•8

Valve Lift w/1.65 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

1

1

Cam Notes

289 227 235 .517 .517 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 297 235 243 .517 .495 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .528 .545 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

18

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 19

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CADILLAC

• 365-390 1956-1962

Hydraulic Flat Tappet Camshaft Components Lifters

91311

Rev Kit

NA

CADILLAC

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

91311

Rev Kit

NA

CADILLAC

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Fuel Pump Distributor Pushrod Gear

Timing Set

--

NA

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

--

NA

Lifters

Rev Kit

91311 3

NA

NA

CADILLAC

Valve Spring, Retainer & Lock Kit

Valve Springs

98214-K11 25 98214 25 98214-K11 25 98214 25

Steel Titanium Retainers Retainers

97112 97112

NA NA

Valve Locks

NA

NA

NA

NA

NA

NA

NA

93005 93005

Rocker Arms

Stud Girdles

Pushrods

93316 25

NA

NA

NA

93316 25

NA

NA

NA

NA NA

NA NA

NA NA

• 368-425-472-500 1968-1984

Lifters

Rev Kit

91311 3

NA

91311 3

NA

Valve Seals

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components 91311 3

NA

• 368-425-472-500 1968-1984

Street Force™ Hydraulic Flat Tappet Camshaft Components 91311 3

NA

• 390-429 1963-1967

Hydraulic Flat Tappet Camshaft Components Lifters

Valve Seals

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

98214-K11 25 98214 25

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93316 25

NA

NA

NA

97112

NA

93005

93316 25

97112

NA

93005

93316 25

97112

NA

93005

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA

NA

Timing Set

NA NA NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

19

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 20

CAMSHAFTS CADILLAC

• 368-425-472-500 1968-1984

Hydraulic Flat Tappet Camshafts Cam Part No.

520021-12 520031-12 520991-10 520051-12 520291-08 520071-12 521261-10 529991

CADILLAC

Cam & Lifter Set Part No.

CL520021-12 CL520031-12 CL520991-10 CL520051-12 CL520291-08 CL520071-12 CL521261-10 NA

Duration Advertised IN EX

263

1000-4200

269

1200-4800

275

1500-4800

275

1800-5000

279

2000-5200

285

2400-5600

291

2600-6000

263

Duration @ .050” IN EX

209

209

528025-09 528045-09 528085-09

CL528025-09

269

215

275

215

CL528045-09 CL528085-09

288

2000-5900

296

2400-6200

.500

.500

221

221

.517

.517

285

221

231

.490

.517

Good low end torque & mid-range horsepower.

285

225

231

.512

.517

295

231

241

.528

.517

237

245

.536

.561

Hyd. Hyd.

1

Hyd. Hyd.

110

106

Hyd. Hyd.

112

108 112 110

Rough idle, good mid-range power. Needs 3200+ stall.

108 108

104

108 106

Hydraulic Flat Tappet Special Order Camshaft.

Duration @ .050” IN EX

Cam Notes

108

Lopey idle, great mid-range torque & top end power. Needs stall.

299

Valve Lash IN EX

112

112

Noticeable idle, Strong mid range torque & power.

Duration Advertised IN EX

280

.462

Fair idle, Strong low & mid range performance.

Custom Grind Camshaft

1800-5600

.462

Lobe Separation Intake Angle Centerline

Good idle, strong low end torque & horsepower.

• 368-425-472-500 1968-1984

Cam & Lifter Set Part No.

Valve Lift w/1.65 Rockers IN EX

Smooth idle, builds good low end torque & power.

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•5•6•3•4•2•7•8

Lobe Separation Intake Angle Centerline

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•5•6•3•4•2•7•8

Valve Lift w/1.65 Rockers IN EX

1

Valve Lash IN EX

1

Cam Notes

288 227 235 .539 .539 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 296 235 243 .583 .583 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

304 243 251 .583 .567 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

20

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 21

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CADILLAC

• 368-425-472-500 1968-1984

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91311 3

NA

91311 3

91311 3 91311 3 91311 3 91311 3 91311 3 91311

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

NA

98214-K11 25 98214 25

NA

CADILLAC

--

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93316 25

NA

NA

NA

97112

NA

93005

93316 25

97112

NA

93005

93316 25

97112 97112 97112 97112 97112 --

NA

93005

NA

93005

NA

93005

NA

93005

NA

93005

--

--

93316 25 93316 25 93316 25 93316 25 --

NA NA NA NA NA NA

NA

NA NA NA NA NA NA

NA

NA NA NA NA NA NA

NA

Lifters

Rev Kit

91462 3

NA

91462 3

NA

NA

NA

NA

NA NA NA NA NA NA

NA NA NA NA NA NA

Timing Set

NA NA NA NA NA NA NA NA

• 368-425-472-500 1968-1984

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components 91462 3

Fuel Pump Distributor Pushrod Gear

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

NA

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA

NA

Timing Set

NA NA NA

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

21

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 22

CAMSHAFTS CADILLAC

• 368-425-472-500 1968-1984

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

520055-12 521125-10

522105-10 529995

CADILLAC

Cam & Lifter Set Part No.

CL520055-12 CL521125-10

CL522105-10 NA

Duration Advertised IN EX

272

1800-5500

280

2000-5400

286

2500-6000

278

Duration @ .050” IN EX

219

529992

NA

CHEVROLET L6

286

227

233

294

233

241

Custom Grind Camshaft

160131-12

CL160131-12

112

108

.539

.539

110

106

.583

.583

110

106

Retro-Fit Hydraulic Roller Special Order Camshaft.

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Duration Advertised IN EX

257

1000-4000

263

Duration @ .050” IN EX

203

209

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Valve Lift w/1.65 Rockers IN EX

Lobe Separation Intake Angle Centerline

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.75 Rockers IN EX

.438

.484

Lobe Separation Intake Angle Centerline

112

108

1

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•5•6•3•4•2•7•8

Mechanical Flat Tappet Special Order Camshaft.

• 194-230-250 1962-1984

Cam & Lifter Set Part No.

.495

Rough idle, strong mid-range torque & horsepower.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

.495

Lobe Separation Intake Angle Centerline

Fair idle, Performance usage. Mid-range torque & horsepower.

• 368-425-472-500 1968-1984

Cam & Lifter Set Part No.

Valve Lift w/1.65 Rockers IN EX

Good idle, broad power range with strong mid-range performance.

Mechanical Flat Tappet Camshafts Cam Part No.

225

Firing Order: 1•5•6•3•4•2•7•8

1

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

22

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 23

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CADILLAC

• 368-425-472-500 1968-1984

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91462 3

NA

91462 3 91462 3 91462 3

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

NA

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

NA

CADILLAC

98438-K12 10 98438 25 97128 10 97216 10 93017 10 93316 25

91415 91418

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA NA NA

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

CHEVROLET L6

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

Valve Seals

--

Rocker Arms

NA

91111-12 3 91112-12

Rev Kit

NA

NA NA

NA NA NA

NA

NA

NA

NA

NA NA

NA NA

Timing Set

NA NA NA NA

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

NA

NA

• 194-230-250 1962-1984

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

NA

Fuel Pump Distributor Pushrod Gear

• 368-425-472-500 1968-1984

Mechanical Flat Tappet Camshaft Components Lifters

Valve Seals

Valve Spring, Retainer & Lock Kit

NA

Valve Springs

Steel Titanium Retainers Retainers

98214-12 97112-12

NA

Valve Locks

Valve Seals

93005-12 93316 25

Rocker Arms

NA

NA

NA

NA

NA

NA

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

23

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 24

CAMSHAFTS

CHEVROLET L6

• 194-230-250 1962-1984

Hydraulic Flat Tappet Camshafts Cam Part No.

162011-09

161021-10 160041-08 160911-08 169991

Cam & Lifter Set Part No.

CL162011-09

CL161021-10 CL160041-08 CL160911-08 NA

CHEVROLET L6

Duration Advertised IN EX

261

1000-4000

267

1500-4400

275

2000-4800

277

2500-5400

261

Duration @ .050” IN EX

207

160892-06 160892-08 161672-06 161672-10 169992

CL160892-06

267

213

275

CL160892-08 CL161672-06 CL161672-10 NA

CHEVROLET L6

265

1800-5600

265

2800-6200

265

3000-6500

221

285

223

Cam Part No.

179991

213 221 231

265

Duration @ .050” IN EX

NA

.502

110

.519

.519

108

.525

.548

108

230

230

.508

.508

265

230

230

.508

.508

108

104

102 104

Fair idle, Hot Street, multi carb & headers. Best with 2500+ stall.

265

240

240

.589

.589

106

102

Rough idle, Circle Track, Drag Race. A major favorite at the track.

265

240

240

.589

.589

110

1

Hyd. Hyd.

1

Hyd. Hyd.

Lobe Separation Intake Angle Centerline

106

Hyd. Hyd.

104

106

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.75 Rockers IN EX

Cam Notes

Hyd. Hyd.

Rough idle, Hot Street, multi carb & headers. Best with 2500+ stall.

106

Fair idle, big cubic inch with 10.0:1+ CR. Drag or Circle Track.

1

Hyd. Hyd.

Valve Lash IN EX

.022

.022

.022

.022

.022 .022

1

Cam Notes

1

.022

1 1

.022

1 1

Mechanical Flat Tappet Special Order Camshaft.

• 216-235-261 1957-1963

Cam & Lifter Set Part No.

.502

Valve Lash IN EX

105

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts

109

Fair idle, Hot Street performance. Strong mid range. 2500+ stall.

Duration Advertised IN EX

265

.490

Nice idle, good low & mid range horsepower. Requires stall converter.

Custom Grind Camshaft

1800-5600

.490

Lobe Separation Intake Angle Centerline

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

• 194-230-250 1962-1984

Cam & Lifter Set Part No.

Valve Lift w/1.75 Rockers IN EX

Smooth idle, strong low end. Good vacuum, good fuel economy.

Mechanical Flat Tappet Camshafts Cam Part No.

207

Firing Order: 1•5•3•6•2•4

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.50 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Hyd. Hyd.

Cam Notes

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

24

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 25

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET L6

• 194-230-250 1962-1984

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111-12 3 91112-12

NA

NA

91111-12 3 91112-12 91111-12 3 91112-12 91111-12 3 91112-12 91111-12 91112-12

NA NA NA

Valve Locks

NA

93005-12 93316 25

NA

98212-12 97112-12

NA

93005-12 93316 25

98111-12 97112-12

98212-12 97112-12 --

--

NA

93005-12 93316 25

NA

93005-12 93316 25

--

--

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91115-12 3 91118-12

NA

NA

91115-12 3 91118-12 91115-12 3 91118-12 91115-12 91118-12

NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

--

Rev Kit

NA

NA

NA

NA

NA NA NA

NA NA NA

NA NA NA

NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

93005-12 93316 25

NA

98438-12 25 97112-12

NA

93005-12 93316 25

98438-12 25 97112-12 98438-12 25 97112-12 --

--

NA

93005-12 93316 25

NA

93005-12 93316 25

--

NA NA NA

NA NA NA

NA NA NA

--

--

NA

NA

NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA

NA NA NA

Timing Set

NA NA NA NA NA

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA

NA NA NA

Timing Set

NA NA NA NA NA

• 216-235-261 1957-1963

Hydraulic Flat Tappet Camshaft Components Lifters

Pushrods

NA

98438-12 25 97112-12

--

CHEVROLET L6

Stud Girdles

--

NA

NA

NA

Rocker Arms

• 194-230-250 1962-1984

Mechanical Flat Tappet Camshaft Components 91115-12 3 91118-12

Valve Seals

98111-12 97112-12

--

CHEVROLET L6

Steel Titanium Retainers Retainers

NA

NA

NA

Valve Springs

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

--

--

NA

NA

NA

Fuel Pump Distributor Pushrod Gear

NA

NA

Timing Set

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

25

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 26

CAMSHAFTS

CHEVROLET L6

• 216-235-261 1957-1963

Mechanical Flat Tappet Camshafts Cam Part No.

179992

Cam & Lifter Set Part No.

NA

CHEVROLET L6

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

• 292 1963-1990

150011-12

Cam & Lifter Set Part No.

CL150011-12

CHEVROLET L6

Duration Advertised IN EX

259

1200-4200

151021-10 150041-08 150911-08

151481-10 159991

267

Duration @ .050” IN EX

205

213

Cam & Lifter Set Part No.

CL151021-10 CL150041-08 CL150911-08

CL151481-10 NA

Duration Advertised IN EX

267

1200-4200

275

1600-4500

277

2000-5000

291

2500-5500

Lobe Separation Intake Angle Centerline

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.75 Rockers IN EX

.490

.501

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

• 292 1963-1990

Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.50 Rockers IN EX

Mechanical Flat Tappet Special Order Camshaft.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•5•3•6•2•4

267

Duration @ .050” IN EX

213

213

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.75 Rockers IN EX

.502

.502

Lobe Separation Intake Angle Centerline

110

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

275

221

221

.519

.519

108

106

104

Nice idle, good low & mid range horsepower. Requires stall converter.

285

223

231

.525

.548

108

104

Fair idle, Hot Street performance. Strong mid range. 2500+ stall.

295

237

241

.525

.548

110

Lopey idle, good mid-range power. Needs 3200+ stall.

Custom Grind Camshaft

106

Hyd. Hyd.

1

1

Hyd. Hyd.

Hyd. Hyd.

Hydraulic Flat Tappet Special Order Camshaft.

1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

26

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 27

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET L6

• 216-235-261 1957-1963

Mechanical Flat Tappet Camshaft Components Lifters

91125

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

CHEVROLET L6

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

Valve Seals

--

Rocker Arms

NA

91111-12 3 91112-12

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

NA

CHEVROLET L6

Valve Springs

Steel Titanium Retainers Retainers

98111-12 97112-12

NA

Valve Locks

Lifters

Rev Kit

91111-12 3 91112-12

NA

NA

91111-12 3 91112-12 91111-12 3 91112-12 91111-12 91112-12

NA NA

NA

Timing Set

NA

NA

NA

NA

NA

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

NA

NA

NA

NA

NA

NA

• 292 1963-1990

Valve Spring, Retainer & Lock Kit

NA

Fuel Pump Distributor Pushrod Gear

Valve Seals

93005-12 93316 25

Hydraulic Flat Tappet Camshaft Components 91111-12 3 91112-12

Pushrods

• 292 1963-1990

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

Stud Girdles

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98111-12 97112-12

NA

93005-12 93316 25

NA

98212-12 97112-12

NA

93005-12 93316 25

98111-12 97112-12

NA

98212-12 97112-12

--

--

--

NA

NA --

93005-12 93316 25

93005-12 93316 25 --

--

NA NA NA

NA

NA NA NA

NA

NA NA NA

NA

NA

NA

NA

NA

NA NA NA

NA NA NA

NA NA NA NA NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

27

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 28

CAMSHAFTS

CHEVROLET L6

• 292 1963-1990

Mechanical Flat Tappet Camshafts Cam Part No.

150892-08 151672-06 151672-10 159992

Cam & Lifter Set Part No.

CL150892-08 CL151672-06 CL151672-10 NA

Duration Advertised IN EX

265

1600-5400

265

2600-6000

265

2800-6200

149998

NA

CHEVROLET 60° V6

149996

265

240

240

NA

.508

.508

Lobe Separation Intake Angle Centerline

108

104

.589

.589

106

102

265

240

240

.589

.589

110

106

Fair idle, big cubic inch with 10.0:1+ CR. Drag or Circle Track.

Valve Lash IN EX

.022

.022

.022

.022

.022

Cam Notes

1

.022

1 1 1

Mechanical Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

Duration @ .050” IN EX

Firing Order: 1•6•5•4•3•2

Valve Lift w/1.50 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

• 2.8L/3.1L/3.4L 1980-1991

Cam & Lifter Set Part No.

Valve Lift w/1.75 Rockers IN EX

Rough idle, Circle Track, Drag Race. A major favorite at the track.

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts Cam Part No.

230

• 200-229 1978-1984

Hydraulic Flat Tappet Camshafts Cam & Lifter Set Part No.

230

Firing Order: 1•5•3•6•2•4

Fair idle, Hot Street, multi carb & headers. Best with 2200+ stall.

Custom Grind Camshaft

CHEVROLET V6 ODD FIRE Cam Part No.

265

Duration @ .050” IN EX

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Lobe Separation Intake Angle Centerline

Firing Order: 1•2•3•4•5•6

Valve Lift w/1.50 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

Hyd. Hyd.

1

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

28

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 29

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET L6

• 292 1963-1990

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91115-12 3 91118-12

NA

NA

91115-12 3 91118-12

91115-12 3 91118-12 91115-12 91118-12

NA NA

NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98438-12 25 97112-12

NA

93005-12 93316 25

NA

98438-12 25 97112-12

NA

93005-12 93316 25

98438-12 25 97112-12

--

--

--

CHEVROLET 90° V6 ODD FIRE

NA

93005-12 93316 25

--

--

91111-12 91112-12

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

CHEVROLET 60° V6

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

Lifters

91111-12 91112-12

Rev Kit

NA

--

Stud Girdles

Pushrods

NA

NA

NA

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA

NA

NA

NA

NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA NA NA NA

--

NA

NA

NA

NA

NA

Timing Set

94200 94300

• 2.8L/3.1L/3.4L 1980-1991

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

--

Rocker Arms

• 200-229-262 1978-1986

Hydraulic Flat Tappet Camshaft Components Lifters

Valve Seals

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

--

NA

NA

NA

NA

NA

Timing Set

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

29

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 30

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC112011-11

MC112011-11DL 4

MC112001-14 MC110931-11

MC110991-08 MC110951-10 MC112431-08 MC110041-10 MC110041-12 MC110961-08 MC112031-08 MC112141-10 MC110971-08

MC112001-14DL 4 MC110931-11DL 4

MC110991-08DL 4 MC110951-10DL 4 MC112431-08DL 4 MC110041-10DL 4 MC110041-12DL 4 MC110961-08DL 4 MC112031-08DL 4 MC112141-10DL 4 MC110971-08DL 4

Duration Advertised IN EX

255

600-4800

261

800-4800

267

1100-5200

275

1700-5700

275

2000-6000

277

2200-6200

279

1800-6000

279

1800-6000

285

2000-6200

285

2800-6400

285

2000-6000

289

2600-6400

CHEVROLET SMALL BLOCK

261

Duration @ .050” IN EX

201

207

117071-12 110031-14 117091-14

Cam & Lifter Set Part No.

CL117071-12

261

207

207

CL110031-14 CL117091-14

290

1800-5800

292

2000-6000

.420

.420

267

213

213

.450

.450

Strong low & mid-range torque & horsepower.

114

110

275

221

221

.470

.470

285

221

231

.470

.470

223

223

.450

.450

Hyd. Hyd.

108

104

Hyd. Hyd.

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

111

110

Hot Street cam. 4 barrel & headers recommended.

289

225

235

.465

.488

Fair idle, Hot Street & mild Bracket Racing.

289

225

235

.465

.488

Fair idle, Hot Street & mild Bracket Racing.

285

231

231

.470

.470

110

108

Hot Street/Brackets, broad power range, strong top end.

285

231

231

.480

.480

108

Fair idle. Broad power band. Works well in heavy vehicles.

289

231

235

.480

.488

107

110

106 106

235

235

.470

.470

108

262

194

203

Hyd. Hyd.

.390

.410

Hyd. Hyd.

1

106

Hyd. Hyd.

104 104

Lobe Separation Intake Angle Centerline

112

Hyd. Hyd. Hyd. Hyd.

108

Valve Lash IN EX

Hyd. Hyd.

Smooth idle, near duplicate of the Chev L75 300HP/327 cam (GM #3733431/3896929).

290

223

223

.447

.447

114

110

Nice idle, near duplicate of the Chev 325HP/327 cam (GM #3863151).

288

224

224

.450

.460

114

1

104

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

1

1

Lopey idle. Pro-Street & Bracket Racing profile. 9.5:1+ CR, 2700+ stall.

Duration @ .050” IN EX

Hyd. Hyd.

Cam Notes

Hyd. Hyd.

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

289

Hyd. Hyd.

107

Street & Strip. Needs 4 barrel, headers & lower gears.

277

Valve Lash IN EX

111

Good low & mid-range horsepower. Needs 4 barrel & headers.

Duration Advertised IN EX

256

.420

Good idle, Street, Off-Road, Towing. Good torque.

• 262-400 1955-1998

600-4800

.410

Lobe Separation Intake Angle Centerline

Smooth idle, Strong low end. High vacuum, good fuel economy.

American Muscle™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift a/1.50 Rockers IN EX

114

Hyd. Hyd. Hyd. Hyd.

Nice idle, near duplicate of the Chev L46 350HP/350 cam (GM #3896962).

1 1 1 1

Cam Notes

1

Cam Notes: master note list on page 260 1 4

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

30

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 31

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

91111 3 91116 4

NA

91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98212-K11 98212 98212-K12 10

NA

98212-K11 98212 98212-K12 10

NA NA NA NA NA NA NA NA NA

98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10

CHEVROLET SMALL BLOCK

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Lifters

Rev Kit

91111 3 91116

NA

98111-K11

91111 3 91116

91111 3 91116

NA NA

98111-K11

98214-K11

Valve Springs

Steel Titanium Retainers Retainers

98111

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98111

98214

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

• 262-400 1955-1998

American Muscle™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070

90005 90070

90100

90100

Pushrods

95205 95010 95205 95010

95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

31

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 32

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

112561-12

112561-12S 112571-12

112571-12S 110041-12 112601-12

112601-12S

Cam & Lifter Set Part No.

CL112561-12

CL112561-12S CL112571-12

CL112571-12S CL110041-12 CL112601-12

CL112601-12S

Duration Advertised IN EX

259

1000-5000

259

1000-5000

269

1200-5500

269

1200-5500

279

1800-6000

289

2200-6400

289

2200-6400

CHEVROLET SMALL BLOCK

269

Duration @ .050” IN EX

205

215

118001-09 118041-09 118081-09

Cam & Lifter Set Part No.

CL118001-09

269

205

CL118041-09 CL118081-09

289

2000-5900

297

2400-6200

CHEVROLET SMALL BLOCK

279

215

215

119141-14 119261-14 119421-14

Cam & Lifter Set Part No.

CL119141-14

225

279

215

225

289

CL119261-14 CL119421-14

Cam Notes: master note list on page 260 1

289

2400-6200

303

3000-6800

Hyd. Hyd.

1

Hyd. Hyd.

.420

.455

112

108

.455

.465

112

108

1

Hyd. Hyd.

.455

.465

112

108

1

Hyd. Hyd.

225

235

.465

.488

112

108

1

294

235

241

.488

.503

112

108

Hyd. Hyd.

294

235

241

.488

.503

112

108

1

Hyd. Hyd.

Street Force™ 4, Lopey idle, good mid-range power. Needs 3200+ stall.

Hyd. Hyd.

1

Small Base Circle, Street Force™ 4, Lopey idle, good mid-range power. Needs 3200+ stall.

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

Cam Notes

289 227 235 .480 .488 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 297 235 243 .488 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .507 .495 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

279

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

• 262-400 1955-1998

2200-5800

112

Cam Notes

Small Base Circle, Street Force™ 2, Good idle & throttle response. Needs good exhaust.

BOOST™ Hydraulic Flat Tappet Camshafts Cam Part No.

.455

Valve Lash IN EX

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

Duration Advertised IN EX

281

.420

Lobe Separation Intake Angle Centerline

Small Base Circle, Street Force™ 1, Mild Street performance, strong low end torque.

• 262-400 1955-1998

1800-5600

Valve Lift w/1.50 Rockers IN EX

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

289

Duration @ .050” IN EX

225

235

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.490

.488

Lobe Separation Intake Angle Centerline

114

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

110

Hyd. Hyd.

103

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5+ Comp. 2000+ Conv.

299

235

245

.488

.488

114

Blower, Lopey idle. 9.0.1 Comp. 8+ lbs Boost 2500+ Conv.

313

243

251

.507

.495

109

110

Blower, Rough idle. Needs Good Heads, 10+ Boost 3200- Conv.

1 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

32

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 33

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111 3 91116

NA

98111-K11

91111 3 91116

91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116

NA

98111-K11

Valve Springs

Steel Titanium Retainers Retainers

98111

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98111

NA

98214-K11

98214

NA

98214-K11

98214

NA NA NA

98214-K11

98214

98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10

CHEVROLET SMALL BLOCK

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

Lifters

Rev Kit

91111 3 91112

NA

98214-K11

91111 3 91112

91111 3 91112

NA NA

98214-K11 98214-K11

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98214 98214

CHEVROLET SMALL BLOCK Lifters

Rev Kit

91111 3 91112

NA

98214-K11

91111 3 91112

91111 3 91112

NA NA

98214-K11 98214-K11

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98214 98214

90100 90100 90100 90100

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Components Notes: master note list on page 260

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070

90100 90100

Pushrods

95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475

94402

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070

90100 90100

Pushrods

95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

94200 94300

Fax: 1300 350 454

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475

94402

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Timing Set

• 262-400 1955-1998

BOOST™ Hydraulic Flat Tappet Camshafts Valve Spring, Retainer & Lock Kit

90100

95205 95010

Fuel Pump Distributor Pushrod Gear

• 262-400 1955-1998

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

90100

Pushrods

94200 94300

33

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 34

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshafts Cam Part No.

112001-14 112011-11

111021-11

110931-11

112571-10 111221-10

110991-08 110951-08 110951-10 110951-12 112431-06 112431-08 112431-10 112431-12 110031-12 110941-11

110041-10 112581-08

112581-08S 112581-10

112581-10S 112581-12

112581-12S 110961-08

Cam & Lifter Set Part No.

CL112001-14 CL112011-11

CL111021-11

CL110931-11

CL112571-10 CL111221-10

CL110991-08 CL110951-08 CL110951-10 CL110951-12 CL112431-06 CL112431-08 CL112431-10 CL112431-12 CL110031-12 CL110941-11

CL110041-10 CL112581-08

CL112581-08S CL112581-10

CL112581-10S CL112581-12

CL112581-12S CL110961-08

Duration Advertised IN EX

255

600-4800

261

800-4800

267

1200-5000

267

1100-5200

269

1200-5500

275

1500-5600

275

1700-5700

275

1800-5800

275

2000-6000

275

2000-6200

277

2200-6200

277

2200-6200

277

2000-6200

277

2000-6200

290

2000-6200

279

1500-5600

279

1800-6000

279

1800-5800

279

1800-5800

279

1800-6000

279

1600-6000

279

1600-6000

279

1600-6000

285

2000-6200

261

Duration @ .050” IN EX

201

207

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.410

.420

Lobe Separation Intake Angle Centerline

114

110

Smooth idle, Strong low end. High vacuum, good fuel economy.

261

207

207

.420

.420

111

Good idle, Street, Off-Road, Towing. Good torque.

267

213

213

.430

.430

111

267

213

213

.450

.450

Strong low & mid-range torque & horsepower.

279

215

225

.455

.465

111

110

275

221

221

.445

.445

Nice idle, Good low & mid range horsepower.

275

221

221

.470

.470

Hyd. Hyd.

107

Hyd. Hyd.

106

Good idle, Strong low & mid-range torque & horsepower.

110

106

108

104

Good low & mid-range horsepower. Needs 4 barrel & headers.

285

221

231

.470

.470

108

Hyd. Hyd.

107 107

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

Valve Lash IN EX

104

Cam Notes

Hyd. Hyd. Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

Hyd. Hyd.

Lopey idle, Strong Street performance. Needs 4 barrel, headers & lower gears.

285

221

231

.470

.470

110

106

Street & Strip. Needs 4 barrel, headers & lower gears.

285

221

231

.470

.470

112

108

Hot Street, Improved carburetion, exhaust & lower gears needed.

277

223

223

.450

.450

106

Lopey idle, Good low end & mid-range horsepower & torque.

277

223

223

.450

.450

108

Hot Street cam. 4 barrel & headers recommended.

277

223

223

.450

.450

110

Hyd. Hyd. Hyd. Hyd.

102

Hyd. Hyd.

106

Hyd. Hyd.

104

1 1 1

Hyd. Hyd.

Hot Street cam. Nice mid range torque. 4 barrel & headers recommended.

277

223

223

.450

.450

112

108

Hyd. Hyd.

Hot Street cam. Nice mid range torque. 4 barrel & headers recommended.

290

223

223

.447

.447

112

108

Good idle, Good mid range torque & horsepower. Needs 2400+ stall.

279

225

225

.465

.465

Fair idle, Strong mid-range performance.

289

225

235

.465

.488

Fair idle, Hot Street & mild Bracket Racing.

289

225

235

.465

.470

111

107

110

106

108

104

Hot Street performance in 383-406. 9.5:1, 2400 stall suggested.

289

225

235

.465

.470

108

104

Hyd. Hyd. Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

Hyd. Hyd.

Small Base Circle, Hot Street performance in 383-406. 9.5:1, 2400 stall suggested.

289

225

235

.465

Hot Street, 4-barrel & headers required.

289

225

235

.465

.470 .470

110

106

110

Small Base Circle, Hot Street, 4-barrel & headers required.

289

225

235

.465

Hot Street, 4-barrel & headers required.

289

225

235

.465

.470 .470

112 112

Small Base Circle, Hot Street, 4-barrel & headers required.

285

231

231

.470

.470

108

Hot Street/Brackets, broad power range, strong top end.

106 108 108

104

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

34

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 35

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111 3 91112

NA

98111-K11

91111 3 91112

91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112

NA NA

98111-K11 98111-K11

Valve Springs

Steel Titanium Retainers Retainers

98111

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98111 98111

NA

98214-K11

98214

NA

98214-K11

98214

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11

98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

95205 95010 95205 95010 95205 95010 95205 95010

92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

35

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 36

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

110961-10 112031-06 112031-08 112031-10 112141-08

112141-08S 112141-10

112141-10S 112141-12

112141-12S 112591-08

112591-08S 112591-10

112591-10S 112591-12

112591-12S 110971-08 112681-06

112681-06S 112681-08

112681-08S 112681-10

112681-10S 112681-12

Cam & Lifter Set Part No.

CL110961-10 CL112031-06 CL112031-08 CL112031-10 CL112141-08

CL112141-08S CL112141-10

CL112141-10S CL112141-12

CL112141-12S CL112591-08

CL112591-08S CL112591-10

CL112591-10S CL112591-12

CL112591-12S CL110971-08 CL112681-06

CL112681-06S CL112681-08

CL112681-08S CL112681-10

CL112681-10S CL112681-12

Duration Advertised IN EX

285

2000-6000

285

2800-6400

285

2800-6400

285

2600-6400

285

2200-6200

285

2200-6200

285

2000-6000

285

2000-6000

285

1800-6200

285

1800-6200

285

2000-6400

285

2000-6400

285

1800-6200

285

1800-6200

285

1800-6000

285

1800-6000

289

2600-6400

289

3000-6800

289

3000-6800

289

3000-6700

289

3000-6700

289

2800-6800

289

2800-6800

289

2800-6800

285

Duration @ .050” IN EX

231

231

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.470

.470

Lobe Separation Intake Angle Centerline

110

Fair idle, Street Machines with headers, gears & 2500+ stall.

285

231

231

.480

.480

106

Valve Lash IN EX

Cam Notes

104

Hyd. Hyd.

1

106

Hyd. Hyd.

106

Hyd. Hyd.

Rough idle, Broad power band. Works well in heavy vehicles. Needs 3200+ stall.

285

231

231

.480

.480

108

Fair idle. Broad power band. Works well in heavy vehicles.

285

231

231

.480

.480

110

106

Hyd. Hyd.

Fair idle, Hot Street/Strip performance. Needs headers, gears & 2500+ stall.

289

231

235

.480

.488

108

104

Lopey idle, broad power band, strong top end power.

289

231

235

.480

.488

108

104

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Lopey idle, broad power band, strong top end power.

289

231

235

.480

.488

110

106

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

289

231

235

.480

.488

110

106

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

289

231

235

.480

.488

112

108

Fair idle, Strong mid range. Good throttle response. 2400+ stall.

289

231

235

.480

.488

112

108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Fair idle, Strong mid range. Good throttle response. 2400+ stall.

295

231

241

.470

.470

108

104

Lopey idle, Hot Street/Brackets. 2500+ stall, 9.0:1+ CR.

295

231

241

.470

.470

108

104

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, lopey idle, Hot Street/Brackets. 2500+ stall, 9.0:1+ CR.

295

231

241

.470

.470

110

Nice idle, Hot Street/Strip, Excellent mid range performance.

295

231

241

.470

.470

110

106 106

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Nice idle, Hot Street/Strip, Excellent mid range performance.

295

231

241

.470

.470

112

108

Hot Street & mild Bracket Racing. Broad mid range.

295

231

241

.470

.470

112

108

Small Base Circle, Hot Street & mild Bracket Racing.

289

235

235

.470

.470

Lopey idle. Pro-Street & Bracket Racing profile.

291

235

237

.488

.488

108 106

291

235

237

.488

.488

106

Hyd. Hyd.

104

Hyd. Hyd.

102

Hyd. Hyd.

102

Lopey idle, strong low to mid-range torque & horsepower.

Hyd. Hyd.

Hyd. Hyd.

Small Base Circle, choppy idle, strong low to mid-range torque & horsepower.

291

235

237

.488

.488

108

Fair idle, Street/Strip, strong mid-range torque & horsepower.

291

235

237

.488

.488

108

104 104

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Fair idle, Street/Strip, strong mid-range torque & horsepower.

291

235

237

.488

.488

Fair idle, strong mid to upper range performance.

291

235

237

.488

.488

110 110

106 106

Small Base Circle, fair idle, strong mid to upper range performance.

291

235

237

.488

.488

Fair idle, strong mid to upper range performance.

112

108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

36

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 37

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111 3 91112

NA

98214-K11

91111 3 91112

91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

95205 95010 95205 95010 95205 95010 95205 95010

92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

37

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 38

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

112681-12S 112601-06

112601-06S 112601-08

112601-08S 110051-08

110051-08S 110051-10 110051-12

110051-12S 110981-08 111671-08

110061-08

110061-08S 110061-12

110061-12S 112041-09

112041-09S 112401-10 119991

119991-S

119991-P55 114991

114991-S

Cam & Lifter Set Part No.

CL112681-12S CL112601-06

CL112601-06S CL112601-08

CL112601-08S CL110051-08

CL110051-08S CL110051-10 CL110051-12

CL110051-12S CL110981-08 CL111671-08

CL110061-08

CL110061-08S CL110061-12

CL110061-12S CL112041-09

CL112041-09S CL112401-10 NA

NA

NA

NA

NA

Duration Advertised IN EX

289

2800-6800

289

3000-6400

289

3000-6400

289

3000-6400

289

3000-6400

289

2800-6200

289

2800-6200

289

2800-6200

289

2600-6400

289

2600-6400

295

2800-6400

297

2800-6800

297

2800-6800

297

2800-6800

297

2800-6600

297

2800-6600

299

3400-6700

299

3400-6700

301

3200-6800

291

Duration @ .050” IN EX

235

237

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.488

.488

Lobe Separation Intake Angle Centerline

112

108

Small Base Circle, fair idle, strong mid to upper range performance.

294

235

241

.488

.503

106

102

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

1

Bracket or 1/4 to 3/8 mile 4bbl. Limited Sportsman. Proven winner for .500” Lift Rule.

294

235

241

.488

.503

106

102

Small Base Circle, Bracket or 1/4 to 3/8 mile 4bbl. Limited Sportsman.

294

235

241

.488

.503

108

104

Lopey idle, good mid-range power. Needs 3200+ stall.

294

235

241

.488

.503

108

104

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Small Base Circle, lopey idle, good mid-range power. Needs 3200+ stall.

297

235

243

.488

.508

108

104

Lopey idle, Serious Street/Strip. Needs 3200+ stall, header & gears.

297

235

243

.488

.508

108

104

Hyd. Hyd.

1

Hyd. Hyd.

1

Small Base Circle, Lopey idle, serious Street/Strip. Needs 3200+ stall, header & gears.

297

235

243

.488

.508

110

106

Lopey idle, Serious Street/Strip. Needs 3200+ stall, header & gears.

297

235

243

.488

.508

112

Lopey idle, Street/Strip or nostalgia. Likes headers & gears.

297

235

243

.488

.508

112

108 108

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Small Base Circle, Lopey idle, Street/Strip or nostalgia. Likes headers & gears.

295

241

241

.470

.470

108

Rough idle, runs strong 4,000 rpm up, needs compression.

297

243

243

.508

.508

108

Lopey idle, needs low gears, headers & compression.

307

243

253

.508

.530

108

104

Hyd. Hyd.

104

Hyd. Hyd.

104

Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR.

307

243

253

.508

.530

108

104

1

Hyd. Hyd.

1 1

Hyd. Hyd.

1

Small Base Circle, Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR.

307

243

253

.508

.530

112

108

Performance/Competition. Works well with small blower or NOS.

307

243

253

.508

.530

112

108

Hyd. Hyd.

1

Hyd. Hyd.

1

Small Base Circle, Performance/Competition. Works well with small blower or NOS.

299

245

245

.510

.510

109

105

Hyd. Hyd.

1

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall.

299

245

245

.510

.510

109

105

Hyd. Hyd.

1

Small Base Circle, E.T. Brackets. Strong mid & upper end power range.

301

247

247

.510

.510

110

E.T. Brackets. Strong mid & upper end power range.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Special Core

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft

4/7 Swap Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Hydraulic Flat Tappet Special Order Camshaft.

106

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd. Hyd. Hyd.

1 1

1,22 1,22

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

38

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 39

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Springs

Lifters

Rev Kit

91111 3 91112

NA

98212-K11 98212 98212-K12 10

NA

98212-K11 98212 98212-K12 10

91111 3 91112

91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

91111 91112

NA

91111 91112

NA

91111 91112 91111 91112 91111 91112

98214-K11

98214

98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10

NA NA NA

--

--

--

--

----

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

----

--

--

--

--

--

--

--

--

----

----

----

----

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

--

--

--

92150 94475

94402

94200 94300

-----

-----

-----

92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

39

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 40

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Hydraulic Flat Tappet Camshafts Cam Part No.

114681-06

114681-06S 114681-08

114681-08S 114681-12

114681-12S 114601-06

114601-06S 114601-08

114601-08S 114601-12

114601-12S 114061-08

114061-08S 114061-12

114061-12S 114991

114991-S

Cam & Lifter Set Part No.

CL114681-06

CL114681-06S CL114681-08

CL114681-08S CL114681-12

CL114681-12S CL114601-06

CL114601-06S CL114601-08

CL114601-08S CL114601-12

CL114601-12S CL114061-08

CL114061-08S CL114061-12

CL114061-12S NA

NA

Duration Advertised IN EX

289

2800-6800

289

2800-6800

289

2800-6800

289

2800-6800

289

2800-6800

289

2800-6800

289

3000-6400

289

3000-6400

289

3000-6400

289

3000-6400

289

3000-6400

289

3400-6800

297

2600-6600

297

2600-6600

297

2600-6600

297

2600-6600

291

Duration @ .050” IN EX

235

237

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

.488

.488

Lobe Separation Intake Angle Centerline

106

102

Lopey idle, strong low to mid-range torque & horsepower.

291

235

237

.488

.488

106

102

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,22

Hyd. Hyd.

Small Base Circle, choppy idle, strong low to mid-range torque & horsepower.

291

235

237

.488

.488

108

104

Lopey idle, strong low to mid-range torque & horsepower.

291

235

237

.488

.488

108

104

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, choppy idle, strong low to mid-range torque & horsepower.

291

235

237

.488

.488

Fair idle, strong mid to upper range performance.

291

235

237

.488

.488

112

108

112

108

Small Base Circle, fair idle, strong mid to upper range performance.

294

235

241

.488

.503

106

102

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Bracket or 1/4 to 3/8 mile 4bbl. Limited Sportsman. Proven winner for .500” Lift Rule.

294

235

241

.488

.503

106

102

Small Base Circle, Bracket or 1/4 to 3/8 mile 4bbl. Limited Sportsman.

294

235

241

.488

.503

108

104

Lopey idle, good mid-range power. Needs 3200+ stall.

294

235

241

.488

.503

108

104

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Small Base Circle, lopey idle, good mid-range power. Needs 3200+ stall.

294

235

241

.488

.503

112

Lopey idle, good mid-range power. Needs 3200+ stall.

294

235

241

.488

.503

112

108

Small Base Circle, Bracket Racing, strong mid & upper rpm.

307

243

253

.508

.530

108

108

104

Performance/Competition. Works well with small blower or NOS.

307

243

253

.508

.530

108

104

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Performance/Competition. Works well with small blower or NOS.

307

243

253

.508

.530

112

108

Performance/Competition. Works well with small blower or NOS.

307

243

253

.507

.530

112

108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Performance/Competition. Works well with small blower or NOS.

Custom Grind Camshaft

4/7 Swap Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Hydraulic Flat Tappet Special Order Camshaft.

1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22 1,22

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

40

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 41

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91111 3 91112

NA

91111 3 91112

91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 91112

91111 91112

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98212-K11 98212 98212-K12 10

NA

98212-K11 98212 98212-K12 10

NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10

NA

--

--

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

--

--

--

--

--

--

--

--

--

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 --

--

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 --

--

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 --

--

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94402

94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

41

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 42

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshafts Cam Part No.

112811-06 112811-08 112811-12

112701-06 112701-08 112701-12 112711-06 112711-08 112711-12 112711-14

112901-06 112901-12 112981-06 112981-12 112731-06 112731-08 110071-06 112921-06 112921-10 112921-12 112851-06 112851-12 110081-06 112911-06

Cam & Lifter Set Part No.

CL112811-06 CL112811-08 CL112811-12

CL112701-06 CL112701-08 CL112701-12 CL112711-06 CL112711-08 CL112711-12 CL112711-14

CL112901-06 CL112901-12 CL112981-06 CL112981-12 CL112731-06 CL112731-08 CL110071-06 CL112921-06

CL112921-10 CL112921-12 CL112851-06 CL112851-12 CL110081-06 CL112911-06

Duration Advertised IN EX

280

3200-6000

280

3200-6000

280

3200-6000

280

3000-6200

280

2800-6400

280

2600-6400

288

3500-6400

288

3500-6200

288

3400-6300

288

3200-6400

294

3800-6600

294

3400-6200

300

4000-7000

300

3800-7000

298

3000-6800

298

3000-6800

274

2500-6000

274

2000-6200

274

2300-6200

274

2400-6200

278

2800-6400

278

2600-6400

282

3000-6200

286

3400-6400

284

Duration @ .050” IN EX

227

231

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.390

.410

Lobe Separation Intake Angle Centerline

106

102

Stock Lift Rule. Best on 1/4 to short 3/8 mile tracks. Good torque.

284

227

231

.390

.410

108

104

Valve Lash IN EX

Hyd. Hyd.

Cam Notes

Hyd. Hyd.

Stock Lift Rule. Best on 1/4 to 3/8 mile tracks. Strong lower mid-range power.

284

227

231

.390

.410

112

Stock Lift Rule. Best on 1/4 to 3/8 mile tracks. Good Vacuum

288

227

235

.390

.410

106

108

102

Hyd. Hyd.

Hyd. Hyd.

Stock Lift Rule. Best on 1/4 to 3/8 mile tracks. Strong lower mid-range power.

288

227

235

.390

.410

108

104

Hyd. Hyd.

Stock Lift Rule. Best on 1/4 to 3/8 mile tracks. Good mid-range horsepower.

288

227

235

.390

.410

112

108

Stock Lift Rule & Vacuum Rule. Broad power band.

294

235

241

.390

.410

106

102

Hyd. Hyd.

Hyd. Hyd.

14

Stock Lift Rule, 3/8 & longer banked tracks. Good torque off corners. Strong mid-range.

294

235

241

.390

.410

108

104

Stock Lift Rule. 3/8 to 1/2 mile banked tracks. Good upper mid-range.

294

235

241

.390

.410

112

108

Stock Lift Rule. 3/8 to 1/2 mile banked tracks. Good top-end power.

294

235

241

.390

.410

114

Stock Lift Rule & Vacuum Rule. Banked 3/8 & longer tracks.

300

241

247

.390

.410

106

110

102

Stock Lift Rule, Fast 3/8 mile banked tracks. Strong mid-range.

300

241

247

.390

.410

112

108

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

14

Hyd. Hyd.

14

Hyd. Hyd.

Stock Lift Rule with Vacuum Rule, Fast 3/8 mile banked tracks. Strong mid-range.

306

247

253

.390

.410

106

102

Hyd. Hyd.

Stock Lift Rule, Fast 3/8 to 1/2 mile banked tracks. Good top-end power.

306

247

253

.390

.410

112

108

Stock Lift Rule with Vacuum Rule, fast 3/8 to 1/2 mile banked tracks.

304

245

251

.400

.400

106

102

Hyd. Hyd.

102

Hyd. Hyd.

Stock Lift Rule, fast 3/8-1/2 mile tracks. Nice mid-range power.

304

245

251

.400

.400

108

Stock Lift Rule, medium to high banked 3/8-1/2 mile tracks.

274

221

221

.410

.410

106

Hyd. Hyd.

104

14

Hyd. Hyd.

.420” Lift Rule cam, 1/4-3/8 mile, low to medium banked. 2bbl. & good exhaust.

278

221

225

.410

.410

106

102

Hyd. Hyd.

.420” Lift Rule cam, low banked 1/4-3/8 mile. Great with 4bbl. & headers.

278

221

225

.410

.410

110

106

.420” Lift Rule with Vacuum Rule, low banked 1/4-3/8 mile.

278

221

225

.410

.410

112

108

.420” Lift Rule with Vacuum Rule, low banked 1/4-3/8 mile.

282

225

229

.410

.410

106

102

.420” Lift Rule cam, medium banked 1/4-3/8 mile tracks.

282

225

229

.410

.410

112

108

.420” Lift Rule with Vacuum Rule, medium banked 1/4-3/8 mile tracks.

282

229

229

.410

.410

106

102

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

14 14 14

.420” Lift Rule cam. Good low & mid-range power. 1/4 to 3/8 mile banked tracks.

292

233

239

.410

.410

106

.420” Lift Rule cam, banked 3/8-1/2 mile. Strong mid-range.

102

Hyd. Hyd.

Cam Notes: master note list on page 260

14 No specific vacuum rating is guaranteed. Some items are not legal for sale or use on any pollution controlled motor vehicle

42

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 43

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91112 3

NA

98214-K11

91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010 95205 95010 95205 95010 95205 95010

92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 10 11 25

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Sets of 8, Requires 2 sets per engine. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

43

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 44

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

112911-12

110091-06 112951-06 112951-12 112841-06 112841-08 112841-12 112871-06 112871-08 112871-12 112961-06 112961-08 112961-12 112761-06 112761-08 112761-12 112891-06 112781-06 112971-06 112971-10 112971-12 112741-06 112741-08 112741-12

Cam & Lifter Set Part No.

CL112911-12

CL110091-06 CL112951-06 CL112951-12 CL112841-06 CL112841-08 CL112841-12 CL112871-06 CL112871-08 CL112871-12 CL112961-06 CL112961-08 CL112961-12 CL112761-06 CL112761-08 CL112761-12 CL112891-06 CL112781-06

CL112971-06 CL112971-10 CL112971-12 CL112741-06 CL112741-08 CL112741-12

Duration Advertised IN EX

286

3200-6400

294

3000-6400

276

3000-6000

276

3000-6400

280

3200-6200

280

3200-6400

280

3200-6600

280

3200-6400

280

3200-6800

280

3400-6800

288

3600-6400

288

3600-6800

288

3600-6800

290

3600-6400

290

3600-6600

290

3800-6800

294

3800-6600

296

3800-6600

296

3800-6800

296

4000-7000

296

4000-7000

302

3800-7000

302

3800-7000

302

3800-7200

292

Duration @ .050” IN EX

233

239

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.410

.410

Lobe Separation Intake Angle Centerline

112

108

Hyd. Hyd.

.420” Lift Rule with Vacuum Rule, banked 3/8-1/2 mile. Strong mid-range.

294

241

241

.410

.410

106

102

Hyd. Hyd.

112

108

Hyd. Hyd.

.420” Lift Rule cam. 3/8 to 1/2 mile banked tracks. Good mid-range.

282

223

229

.420

.420

.420” Lift Rule, flat to low banked 1/4 mile tracks.

282

223

229

.420

.420

106

102

.420” Lift Rule with Vacuum Rule, flat to low banked 1/4 mile tracks.

280

227

227

.420

.420

Valve Lash IN EX

106

102

Hyd. Hyd. Hyd. Hyd.

Cam Notes

14

14

.420” Lift Rule, low banked 1/4-3/8 mile tracks. Good low to mid range power.

280

227

227

.420

.420

108

104

Hyd. Hyd.

.420” Lift Rule, medium banked 1/4-3/8 mile tracks. 2bbl. & good exhaust.

280

227

227

.420

.420

112

108

Hyd. Hyd.

.420” Lift with Vacuum Rule, Medium banked 1/4-3/8 mile tracks. 2bbl. & good exhaust.

286

227

233

.420

.420

106

102

Hyd. Hyd.

14

.420” Lift Rule, low banked 1/4-3/8 mile tracks. Good torque off of corners.

286

227

233

.420

.420

108

104

.420” Lift Rule, medium banked 1/4-3/8 mile tracks. 4bbl. & headers.

286

227

233

.420

.420

112

108

Hyd. Hyd.

Hyd. Hyd.

.420” Lift with Vacuum Rule, Medium banked 1/4-3/8 mile tracks. 4bbl. & headers.

292

235

239

.420

.420

.420” Lift Rule, medium banked 3/8 mile tracks.

292

235

239

.420

.420

106 108

102 104

.420” Lift Rule, 3/8 mile tracks with fast corners. 4bbl. & good exhaust.

292

235

239

.420

.420

112

.420” Lift Rule with Vacuum Rule, banked 3/8 mile tracks.

294

237

241

.420

.420

106

108

102

.420” Lift Rule. 3/8 & longer banked tracks. Strong mid-range.

294

237

241

.420

.420

108

104

.420” Lift Rule. 3/8 to 1/2 mile banked tracks. Good upper mid-range.

294

237

241

.420

.420

112

108

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

14

14

Hyd. Hyd.

Hyd. Hyd.

.420” Lift Rule. Fast 3/8 to 1/2 mile banked tracks. Good top end power.

298

241

245

.420

.420

106

102

.420” Lift Rule. Fast 3/8 to 1/2 mile tracks. Broad torque range.

296

243

243

.420

.420

106

102

Hyd. Hyd. Hyd. Hyd.

.420” Lift Rule cam. Good upper mid-range torque. High banked 3/8 to 1/2 mile.

302

243

249

.420

.420

106

102

Hyd. Hyd.

.420” Lift Rule cam. 2bbl. or 4bbl., heavy car with manifolds. Good throttle response.

302

243

249

.420

.420

110

106

Hyd. Hyd.

.420” Lift Rule cam. 2bbl. or 4bbl., heavy car with manifolds. 3/8-1/2 mile banked.

302

243

249

.420

.420

112

108

Hyd. Hyd.

.420” Lift with Vacuum Rule, 2bbl. or 4bbl., heavy car with manifolds. 3/8-1/2 banked.

306

249

253

.420

.420

.420” Lift Rule, high banked 1/2 mile tracks.

306

249

253

.420

.420

.420” Lift Rule, fast high banked 1/2 mile tracks.

306

249

253

.420

.420

106 108 112

102 104 108

.420” Lift Rule, fast high banked 1/2 mile tracks with fast corners.

Hyd. Hyd.

14

Hyd. Hyd. Hyd. Hyd.

Cam Notes: master note list on page 260

14 No specific vacuum rating is guaranteed. Some items are not legal for sale or use on any pollution controlled motor vehicle

44

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 45

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91112 3

NA

98214-K11

91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010 95205 95010 95205 95010 95205 95010

92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 10 11 25

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Sets of 8, Requires 2 sets per engine. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

45

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 46

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

112431-06 112431-10 112431-12 112931-06 112931-12 111241-06 111241-12

112691-06 112691-10 112691-12 112791-06 112791-08 112791-12 112821-06 112821-08 112941-06 112941-12 112831-06 112831-12 112721-06 112751-06 119991

119991-S

119991-P55

Cam & Lifter Set Part No.

CL112431-06 CL112431-10 CL112431-12 CL112931-06 CL112931-12 CL111241-06 CL111241-12

CL112691-06 CL112691-10 CL112691-12 CL112791-06 CL112791-06 CL112791-12 CL112821-06 CL112821-08 CL112941-06 CL112941-12 CL112831-06

CL112831-12 CL112721-06 CL112751-06 NA

NA

NA

Duration Advertised IN EX

277

2600-6400

277

2600-6600

277

2600-6500

276

2600-6600

276

2600-6600

276

2600-6800

276

2400-6400

284

2500-6600

284

2400-6800

284

2400-6800

288

2800-6400

288

2800-6400

288

3000-6600

290

3200-6600

290

3200-6600

294

3400-6600

294

3400-6800

294

3400-7000

294

3600-7000

296

2600-6400

296

2600-6400

277

Duration @ .050” IN EX

223

223

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.450

.450

Lobe Separation Intake Angle Centerline

106

.450” Lift Rule, flat to low banked 1/4-3/8 mile tracks.

277

223

223

.450

.450

110

.450” Lift Rule, fast tight banked 1/4 mile tracks. 2bbl. OK.

277

223

223

.450

.450

112

223

227

.450

.450

106

Hyd. Hyd.

108

Hyd. Hyd.

14

Hyd. Hyd.

14

Hyd. Hyd.

14

106

102

.450” Lift Rule, low banked 1/4-3/8 mile tracks. Good throttle response.

280

223

227

.450

.450

112

108

Hyd. Hyd.

Hyd. Hyd.

.450” Lift Rule, low banked 3/8-1/2 mile tracks. Good mid & top end power.

284

223

231

.450

.450

106

102

.450” Lift Rule cam, great on 3/8 mile tracks. Good low end response.

284

223

231

.450

.450

112

108

Hyd. Hyd.

.450” Lift Vacuum Rule cam. Great on 1/4-3/8 mile mild to medium bank tracks.

284

231

231

.450

.450

106

Cam Notes

102

.450” Lift Rule with Vacuum Rule, flat to low banked 1/4 mile tracks.

280

Valve Lash IN EX

102

Hyd. Hyd.

108

Hyd. Hyd.

.450” Lift Rule cam. Strong low & mid-range power. Banked 1/4-3/8 mile tracks.

284

231

231

.450

.450

.450” Lift Rule cam. Strong mid-range horsepower.

284

231

231

.450

.450

.450” Lift Rule cam. Strong mid-range horsepower.

292

235

239

.450

.450

.450” Lift Rule, medium banked 3/8 mile tracks.

292

235

239

.450

.450

.450” Lift Rule, medium banked 3/8 mile tracks.

292

235

239

.450

.450

110 112

237

237

.450

.450

Hyd. Hyd.

106

102

Hyd. Hyd.

112

108

Hyd. Hyd.

108

.450” Lift Rule with Vacuum Rule, banked 3/8 mile tracks.

290

106

106

104 102

Hyd. Hyd. Hyd. Hyd.

14

14

.450” Lift Rule, medium banked 3/8-1/2 mile tracks. Good throttle response.

290

237

237

.450

.450

108

104

Hyd. Hyd.

.450” Lift Rule, medium banked 3/8-1/2 mile tracks. Strong mid-range power.

298

241

245

.450

.450

106

102

.450” Lift Rule, high banked 3/8-1/2 mile tracks. Strong mid to top end.

298

241

245

.450

.450

112

108

Hyd. Hyd.

Hyd. Hyd.

.450” Lift Rule with Vacuum Rule, high banked 1/2 mile tracks. Good mid to top end.

302

241

249

.450

.450

106

102

Hyd. Hyd.

.450” Lift Rule, fast high banked 3/8-1/2 mile tracks. Strong mid to top end.

302

241

249

.450

.450

112

108

Hyd. Hyd.

.450” Lift Rule with Vacuum Rule, high banked 1/2 mile tracks. Strong mid to top end.

296

243

243

.450

.450

106

102

Hyd. Hyd.

14 14

.450” Lift Rule cam. Good upper mid-range torque. High banked 3/8 to 1/2 mile.

308

243

255

.450

.450

106

102

Hyd. Hyd.

.450” Lift Rule cam. Good upper mid-range torque. High banked 3/8 to 1/2 mile.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Special Core

Hydraulic Flat Tappet Special Order Camshaft.

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Cam Notes: master note list on page 260

46

1 Stock (O.E.) valve springs cannot be used. 14 No specific vacuum rating is guaranteed. 22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 47

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Oval Track Lift Rule Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111 3 91112 3

NA

98214-K11

91111 3 91112 3 91111 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3 91112 3

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

91112

NA

91112

NA

91112

98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11 98214-K11

NA

--

--

--

Valve Springs

Steel Titanium Retainers Retainers

98214

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214 98214

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 98214 --

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11 97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 90005 90100 97132 10 97165 10 93017 10 93316 25 90045-8 11

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

95205 95010 --

--

--

92150 94475 92150 94475

92150 94475

92150 94475

94402 94402

94402

94402

94200 94300 94200 94300

94200 94300

94200 94300

Components Notes: master note list on page 260 3 10 11 25

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Sets of 8, Requires 2 sets per engine. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

47

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 48

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

118005-09 118045-09 118085-09

Cam & Lifter Set Part No.

CL118005-09 CL118045-09 CL118085-09

Duration Advertised IN EX

280

1800-5600

288

2000-5900

296

2400-6200

CHEVROLET SMALL BLOCK

Duration @ .050” IN EX

119165-14 119135-14 119275-16 119225-14 119425-14

Cam & Lifter Set Part No.

CL119165-14 CL119135-14 CL119275-16 CL119225-14 CL119425-14

277

2000-5900

287

2400-6200

287

2400-6200

307

2400-6200

CHEVROLET SMALL BLOCK

110225-10

110225-10S 110225-12 110315-10 110315-12

Cam & Lifter Set Part No.

CL110225-10

273

CL110225-10S CL110225-12 CL110315-10 CL110315-12

Cam Notes: master note list on page 260 1 2

221

221

287

260

800-4200

260

800-4200

262

1000-4400

262

1000-4500

Valve Lift w/1.50 Rockers IN EX

.510

.510

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

225

235

.525

.536

114

110

285

235

233

.544

.540

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.570

.560

114

110

Hyd. Hyd.

Blower, Lopey/Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.600

.600

114

110

Hyd. Hyd.

Blower, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

260

Firing Order: 1•8•4•3•6•5•7•2

Blower, Fair idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

266

Duration @ .050” IN EX

207

213

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.450

.465

Lobe Separation Intake Angle Centerline

110

Great daily usage, smooth idle, great fuel economy.

266

207

213

.450

.465

110

106 106

Small Base Circle, Great daily usage, smooth idle, great fuel economy.

266

207

213

.450

.465

112

Great daily usage, smooth idle, great fuel economy.

268

209

215

.465

.470

Improved throttle response & low end torque.

268

209

215

.465

.470

Improved throttle response & low end torque.

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

48

Phone: 1300 350 351

Duration @ .050” IN EX

• 262-400 1955-1998

800-4200

Cam Notes

Turbo, Good idle. High Performance Street, stock converter ok, best with 1800+ and gears.

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Valve Lash IN EX

304 243 251 .530 .515 109 103 Hyd. Hyd. 1,2 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

273

Lobe Separation Intake Angle Centerline

296 235 243 .530 .530 109 103 Hyd. Hyd. 1,2 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 262-400 1955-1998

1800-5600

Valve Lift w/1.50 Rockers IN EX

288 227 235 .525 .530 109 103 Hyd. Hyd. 1,2 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Fax: 1300 350 454

110 112

108 106 108

1,2 1,2 1,2 1,2

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

1,2 1,2 1,2 1,2

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 49

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Lifters

91164N 3 91160 91164N 3 91160 91164N 3 91160

Rev Kit

Valve Spring, Retainer & Lock Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113

CHEVROLET SMALL BLOCK

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070

Lifters

91164N 3 91160 91164N 3 91160 911603 911603

Rev Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 98218-K1210 98218 98221 98218-K1210 98218 98221

911603

CHEVROLET SMALL BLOCK

Steel Titanium Retainers Retainers

Valve Locks

Lifters

91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160

Rev Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97132 10

97216 97216

93017 10 93316 25 93017 10 93316 25

95201 95022 95201 95022

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Components Notes: master note list on page 260

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475

94402

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

94200 94300

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475

94402 94402 94402

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

94200 94300 94200 94300 94200 94300

Fax: 1300 350 454

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475

94402 94402 94402

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Timing Set

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

90100

95201 95022

Fuel Pump Distributor Pushrod Gear

• 262-400 1955-1998

BOOST™ Retro-Fit Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

90100

Pushrods

94200 94300 94200 94300 94200 94300

49

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 50

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshafts (cont.) Cam Part No.

110235-10

110235-10S 110235-12

110235-12S 110235-14 113215-08 113215-10 111145-10 111145-12 111145-14

110885-08 110885-10 110245-10 110245-12

110245-12S 110245-14 110325-08 110325-10

110325-10S 110525-10 110525-12 110305-08 110255-10

110255-10S

Cam & Lifter Set Part No.

CL110235-10

CL110235-10S CL110235-12

CL110235-12S CL110235-14 CL113215-08 CL113215-10 CL111145-10 CL111145-12 CL111145-14

CL110885-08 CL110885-10 CL110245-10 CL110245-12

CL110245-12S CL110245-14 CL110325-08 CL110325-10

CL110325-10S CL110525-10 CL110525-12 CL110305-08 CL110255-10

CL110255-10S

Duration Advertised IN EX

266

1000-4800

266

1000-4800

266

1000-5000

266

1000-5000

266

1000-5000

270

1200-5400

270

1300-5500

272

1500-5600

272

1500-5600

272

1500-5600

278

2000-5800

278

2000-5800

278

1600-5400

278

1800-5400

278

1800-5400

278

1800-5600

278

2000-5400

278

2200-5800

278

2200-5800

280

2300-6100

280

2300-6200

282

2000-5500

284

2200-5800

284

2200-5800

270

Duration @ .050” IN EX

213

217

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.485

.495

Lobe Separation Intake Angle Centerline

110

Fair idle, good low & mid-range performance increase.

270

213

217

.485

.495

110

106 106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

Small Base Circle, Fair idle, good low & mid-range performance increase.

270

213

217

.485

.495

112

108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

213

217

.485

.495

112

108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

213

217

.485

.495

114

110

Good idle, broad power range with strong mid-range performance.

278

217

225

.495

.500

108

104

Noticeable idle, broad low to mid range power band. Needs 2000+ stall.

278

217

225

.495

.500

110

106

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Good idle, Street Performance. Strong lower mid range. Stock converter OK.

278

219

225

.525

.525

110

106

Hyd. Hyd.

Fair idle, Performance Street, Nice streetable mid range power. 1800+ stall suggested.

278

219

225

.525

.525

112

108

Hyd. Hyd.

Fair idle, good all around performance. Good vacuum. Computer compatible with chip.

278

219

225

.525

.525

114

110

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. Computer compatible with chip.

278

225

225

.525

.525

108

104

Hyd. Hyd.

Mild choppy idle, strong torque curve. Likes good intake & exhaust, 2500+ stall.

278

225

225

.525

.525

110

106

Hyd. Hyd.

Fair idle, Street high performance. 2200+ stall, aftermarket intake, headers.

284

225

231

.500

.510

Fair idle, Street/Strip. Auto OK with 2500+ stall.

284

225

231

.500

.510

110 112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.500

.510

112

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.500

.510

114

Mild idle, Street Performance, great with small blower or NOS.

286

225

233

.525

.530

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.525

.530

110

110

104

106

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

225

233

.525

.530

110

106

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Small Base Circle, Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

227

233

.560

.560

110

106

Hyd. Hyd.

Choppy idle, Saturday nite special, Street/Strip. Needs good intake, headers & 2500+.

286

227

233

.560

.560

112

108

Hyd. Hyd.

Good idle & vacuum. Good all around mid range performance. 2500+ stall.

282

229

229

.480

.480

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.510

.530

110

106

Hyd. Hyd.

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

288 231 235 .510 .530 110 106 Hyd. Hyd. 1,2 Small Base Circle, Rough idle, Street/Strip performance. Great low to mid-range torque & power.

Cam Notes: master note list on page 260 1 2

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

50

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 51

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshaft Components Lifters

91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160

Rev Kit

Valve Spring, Retainer & Lock Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

51

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 52

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshafts (cont.) Cam Part No.

110255-12

110255-12S 110265-10

110265-10S 110265-12

110265-12S 110265-14 116115-10 116115-12 116115-14

116615-08 116615-10 116615-12 110635-10 111815-10 111815-12

110275-10

110275-10S 110275-12

110275-12S 111655-10 111655-12

113365-10 110335-10

Cam & Lifter Set Part No.

CL110255-12

CL110255-12S CL110265-10

CL110265-10S CL110265-12

CL110265-12S CL110265-14 CL116115-14 CL116115-14 CL116115-14

CL116615-08 CL116615-10 CL116615-12 CL110635-10 CL111815-10 CL111815-12

CL110275-10

CL110275-10S CL110275-12

CL110275-12S CL111655-10 CL111655-12

CL113365-10 CL110335-10

Duration Advertised IN EX

284

2000-5600

284

2000-5600

286

2400-5800

286

2400-5800

286

2400-6000

286

2400-6000

286

2400-6200

287

2600-6500

287

2600-6700

287

2600-6800

262

2400-6400

262

2600-6500

262

2600-6700

290

2400-6400

290

2400-6400

290

2400-6500

294

2600-6400

294

2600-6400

294

2600-6500

294

2600-6500

296

2800-6500

296

2800-6600

298

2600-6600

300

2800-6400

288

Duration @ .050” IN EX

231

235

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.510

.530

Lobe Separation Intake Angle Centerline

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

288

231

235

.510

.530

112

108

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

Small Base Circle, Fair idle, performance usage. Great mid-range torque & horsepower.

294

233

241

.530

.545

110

106

Hyd. Hyd.

Rough idle, Hot Street & Bracket Racing. 10.0:1-up CR advised. 2800+ stall.

294

233

241

.530

.545

110

106

Hyd. Hyd.

Small Base Circle, Rough idle, Hot Street & Bracket Racing. 10.0:1-up CR. 2800+ stall.

294

233

241

.530

.545

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

233

241

.530

.545

112

108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

233

241

.530

.545

114

110

Hyd. Hyd.

Good idle, great mid range performance. 10.0:1+ CR, 2600+ stall & 3.73 or lower gears.

291

235

239

.600

.580

110

106

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

291

235

239

.600

.580

112

108

Fair idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

291

235

239

.600

.580

114

110

Fair idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

108

104

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

110

106

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

112

108

Fair idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

290

237

237

.560

.560

110

106

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

298

237

245

.560

.560

110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip applications. 10.0:1 CR, good exhaust, 3000+ stall.

298

237

245

.560

.560

112

108

Hyd. Hyd.

Lopey idle, Hot Street & Bracket Racing, great mid range. 10.0:1+ CR, 3000+ stall.

300

241

247

.545

.565

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.545

.565

110

106

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.545

.565

112

108

Rough idle, Bracket Race with excellent mid & upper end horsepower.

300

241

247

.545

.565

112

108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Rough idle, Bracket Race with excellent mid & upper end HP.

302

243

249

.600

.600

110

Rough idle, Hot Street/Strip, good mid-range torque.

302

243

249

.600

.600

112

106 108

Rough idle, Hot Street/Strip, great with aftermarket EFI systems.

298

245

245

.560

.560

110

106

Rough idle, Street/Strip, Needs 3000+ stall, headers & good intake.

304

247

251

.550

.540

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

Cam Notes: master note list on page 260 1 2

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

52

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 53

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshaft Components Lifters

91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 911603 911603 911603

91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91164N 3 91160 91160 3 91160 3 91160 3

91164N 3 91160

Rev Kit

Valve Spring, Retainer & Lock Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

53

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 54

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshafts (cont.) Cam Part No.

110335-10S 110345-08 110345-10 110345-12 113155-10

113155-10S 113155-12 116755-10

116755-10S 110355-10 111335-10 111335-12

111335-12S 116675-08 116675-10

116675-10S 119995

119995-S 119999 114995

114995-S 114998

114998-S

Cam & Lifter Set Part No.

CL110335-10S CL110345-08 CL110345-10 CL110345-12 CL113155-10

CL113155-10S CL113155-12 CL116755-10

CL116755-10S CL110355-10 CL111335-10 CL111335-12

CL111335-12S CL116675-08 CL116675-10

CL116675-10S NA

NA

NA NA

NA

NA

NA

Duration Advertised IN EX

300

2800-6400

300

2800-6400

300

2800-6400

300

2800-6600

300

3000-6600

300

3000-6600

300

3000-6800

304

3000-6800

304

3000-6800

304

3000-6800

304

2800-6400

304

2800-6400

304

2800-6400

312

3000-6800

312

3000-6800

312

3000-6800

304

Duration @ .050” IN EX

247

251

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.550

.540

Lobe Separation Intake Angle Centerline

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

Small Base Circle, Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

306

247

253

.565

.580

108

104

Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall.

306

247

253

.565

.580

110

106

Hyd. Hyd.

Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall.

306

247

253

.565

.580

112

Lopey idle, broad mid to upper mid range power. 3500+ stall.

308

247

255

.600

.600

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

308

247

255

.600

.600

110

106 106 106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

308

247

255

.600

.600

112

108

Hyd. Hyd.

Pro Street/Bracket, good top end horsepower. Needs compression & 3500+ stall.

308

251

255

.600

.580

110

106

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

308

251

255

.600

.580

110

106

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.555

.555

110

106

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

312

251

259

.600

.600

110

106

Hyd. Hyd. Hyd. Hyd.

Rough idle, best in large 420+ ci. engine. Great upper mid to top end performance.

312

251

259

.600

.600

112

Rough idle, Broad mid to top end performance in 420+ ci.

312

251

259

.600

.600

112

108 108

Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Rough idle, Broad mid to top end performance in 420+ ci.

320

257

267

.600

.600

110

106

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

320

257

267

.600

.600

110

106

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

320

257

267

.600

.600

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Small Base Circle, Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft

Small Base Circle, Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft, with Cast Distributor Gear

Retro-Fit Hydraulic Roller Special Order Camshaft. Std. or Small Base.

Custom Grind Camshaft, 4/7 Swap Firing Order

Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft, 4/7 Swap Firing Order

Small Base Circle, Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft, ”C” (LS) Firing Order

Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft, ”C” (LS) Firing Order

Small Base Circle, Retro-Fit Hydraulic Roller Special Order Camshaft.

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

Cam Notes: master note list on page 260 1 2

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

54

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 55

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Retro-Fit Hydraulic Roller Camshaft Components Lifters

91164N 3 91160 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 91160 3 ----

--

--

--

--

Rev Kit

Valve Spring, Retainer & Lock Kit

Valve Springs

90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 90132 98213-K12 10 98213 98113-K12 10 98113 --

--

--

--

--

--

---

--

--

--

---

--

--

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

---

--

--

--

--

--

--

--

--

--

--

--

---

--

--

--

---

--

--

--

---

--

--

--

---

--

--

--

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 ----

--

--

--

--

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 ----

--

--

--

--

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 ----

--

--

--

--

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

92150 94475 92150 94475

92150 94475

92150 94475

92150 94475

92150 94475

92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94402 94402 94402

94402

94402

94402

94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

94200 94300

94200 94300

94200 94300

94200 94300

94200 94300

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

55

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 56

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Rattler Cams™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

188005-09 188045-09 188085-09

Cam & Lifter Set Part No.

CL188005-09 CL188045-09 CL188085-09

Duration Advertised IN EX

280

1800-5600

288

2000-5900

296

2400-6200

CHEVROLET SMALL BLOCK

Duration @ .050” IN EX

Valve Lift w/1.50 Rockers IN EX

189165-14 189135-14 189275-16 189225-14 189425-14

Cam & Lifter Set Part No.

CL119165-14

304 243 251 .530 .515 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

CL119135-14 CL18975-16

CL119225-14 CL119425-14

Duration Advertised IN EX

273 277

2000-5900

287

2400-6200

287

2400-6200

307

2400-6200

CHEVROLET SMALL BLOCK

273

Duration @ .050” IN EX

221

221

180225-10 180225-12 180315-10 180315-12 180235-10

Cam & Lifter Set Part No.

CL180225-10

CL180225-12 CL180315-10 CL180315-12 CL180235-10

Valve Lift w/1.50 Rockers IN EX

.510

.510

Firing Order: 1•8•4•3•6•5•7•2

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Turbo, Good idle. High Performance Street, stock converter ok, best with 1800+ and gears.

287

225

235

.525

.536

114

110

Blower, Fair idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

285

235

233

.544

.540

116

112

Hyd. Hyd.

297

235

245

.570

.560

114

110

Hyd. Hyd.

1

Blower, Lopey idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.600

.600

114

110

1 1

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Hyd. Hyd.

1

Blower, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

Cam Notes

296 235 243 .530 .530 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 262-400 1955-1998

1800-5600

Valve Lash IN EX

288 227 235 .525 .530 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

Lobe Separation Intake Angle Centerline

Duration Advertised IN EX

260

800-4200

260

800-4200

262

1000-4400

262

1000-4400

266

1000-4800

266

Duration @ .050” IN EX

207

213

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.450

.465

Lobe Separation Intake Angle Centerline

110

Great daily usage, smooth idle, great fuel economy.

266

207

213

.450

.465

112

268

209

215

.465

.470

Improved throttle response & low end torque.

268

209

215

.465

.470

110 112

Improved throttle response & low end torque. Poor Vacuum

270

213

217

.485

.495

110

Fair idle, good low & mid-range performance increase.

Cam Notes

Hyd. Hyd.

1

106

Hyd. Hyd.

106

Hyd. Hyd.

108

Great daily usage, smooth idle, great fuel economy.

Valve Lash IN EX

108 106

Hyd. Hyd. Hyd. Hyd.

1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

56

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 57

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft for OE Roller Applications Components Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 91113 3 91113FB

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

98213-K12 10 98213 98113-K12 10 98113

CHEVROLET SMALL BLOCK

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90084

90100

90084 90084

90100 90100

Pushrods

95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475

94402

Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 9117433 9117433 9117433

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

NA NA

98213-K12 10 98213 98113-K12 10 98113 98218-K12 10 98213 98118-K12 10 92221 98218-K12 10 98213 98118-K12 10 92221

CHEVROLET SMALL BLOCK

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 9721610 93017 10 93316 25 97174 10 97132 10 9721610 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90084

90100

90084 90084 90084 90084

90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

NA NA

98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475 92150 94475 92150 94475

94402 94402 94402

94301 94301 94301

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Application Components Valve Spring, Retainer & Lock Kit

94301

• 262-400 1955-1998

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications Components Valve Spring, Retainer & Lock Kit

Timing Set

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90084

90100

90084 90084 90084 90084

90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475 92150 94475 92150 94475

94402 94402 94402

94301 94301 94301

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

57

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 58

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

180235-12 180235-14 183215-08 183215-10 183215-14 181145-10 181145-12

181145-12S 181145-14

180885-08 180885-10 180245-10

180245-10S 180245-12 180245-14 180325-08 180325-10 180325-12 186685-14 180525-10 180525-12 180305-08 180255-10 180255-12

Cam & Lifter Set Part No.

CL180235-12 CL180235-14 CL183215-08 CL183215-10 CL183215-14 CL181145-10 CL181145-12

CL181145-12S CL181145-14

CL180885-08 CL180885-10 CL180245-10

CL180245-10S CL180245-12 CL180245-14 CL180325-08 CL180325-10 CL180325-12

CL186685-14 CL180525-10 CL180525-12 CL180305-08 CL180255-10 CL180255-12

Duration Advertised IN EX

266

1000-5000

266

1000-5000

270

1200-5400

270

1300-5500

270

1300-5500

272

1500-5600

272

1500-5600

272

1500-5600

272

1500-5600

278

2000-5800

278

2000-5800

278

1600-5400

278

1600-5400

278

1800-5400

278

1800-5600

278

2000-5800

278

2200-5800

278

2200-5800

278

2800-6700

280

2300-6100

280

2300-6200

282

2000-5500

284

2200-5800

284

2000-5600

270

Duration @ .050” IN EX

213

217

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.485

.495

Lobe Separation Intake Angle Centerline

112

108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

213

217

.485

.495

114

110

Good idle, broad power range with strong mid-range performance.

278

217

225

.495

.500

108

104

Noticeable idle, broad low to mid range power band. Needs 2000+ stall.

278

217

225

.495

.500

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Good idle, Street Performance. Strong lower mid range. Stock converter OK.

278

217

225

.495

.500

114

110

Hyd. Hyd.

Good idle, Street Performance. Strong lower mid range. Stock converter OK.

278

219

225

.525

.525

110

106

Hyd. Hyd.

Fair idle, Performance Street, Nice streetable mid range power. 1800+ stall suggested.

278

219

225

.525

.525

112

108

Hyd. Hyd.

Fair idle, good all around performance. Good vacuum. Computer compatible with chip.

278

219

225

.525

.525

112

108

Hyd. Hyd.

Small Base Circle, Fair idle, good all around performance. Computer compatible with chip.

278

219

225

.525

.525

114

110

Hyd. Hyd.

Fair idle, good all around performance. Good vacuum. Computer compatible with chip.

278

225

225

.525

.525

108

104

Hyd. Hyd.

Mild choppy idle, strong torque curve. Likes good intake & exhaust, 2500+ stall.

278

225

225

.525

.525

110

106

Hyd. Hyd.

Fair idle, Street high performance. 2200+ stall, aftermarket intake, headers.

284

225

231

.500

.510

Fair idle, Street/Strip. Auto OK with 2500+ stall.

284

225

231

.500

.510

110 110

106 106

Small Base Circle, Fair idle, Street/Strip. Auto OK with 2500+ stall.

284

225

231

.500

.510

112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.500

.510

114

108

Mild idle, Street Performance, great with small blower or NOS.

286

225

233

.525

.530

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.525

.530

110

110

104

106

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

225

233

.525

.530

112

108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

288

225

235

.525

.530

114

Upper mid-range & top end power. Needs 10.0:1+ CR.

286

227

233

.560

.560

110

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Choppy idle, Saturday nite special, Street/Strip. Needs good intake, headers & 2500+.

286

227

233

.560

.560

112

108

Hyd. Hyd.

Good idle & vacuum. Good all around mid range performance. 2500+ stall.

282

229

229

.480

.480

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.510

.530

110

106

Hyd. Hyd.

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.510

.530

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

Hyd. Hyd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

58

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 59

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Application Components Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90084

90100

90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

59

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 60

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

180265-10

180265-10S 180265-12 180265-14 186115-10 186115-12 186115-14

186615-08 186615-10 186615-12 180635-10 181815-10 181815-12 180275-10 180275-12 181655-10 181655-12 183365-10 180335-10 180345-08 180345-10

180345-10S 180345-12 183155-10

Cam & Lifter Set Part No.

CL180265-10

CL180265-10S CL180265-12 CL180265-14 CL186115-14 CL186115-14 CL186115-14

CL186615-08 CL186615-10 CL186615-12 CL180635-10 CL181815-10 CL181815-12 CL180275-10 CL180275-12 CL181655-10 CL181655-12 CL183365-10

CL180335-10 CL180345-08 CL180345-10

CL180345-10S CL180345-12 CL183155-10

Duration Advertised IN EX

286

2400-5800

286

2400-5800

286

2400-6000

286

2400-6200

287

2400-6400

287

2400-6400

287

2400-6400

262

2400-6400

262

2400-6400

262

2400-6400

290

2400-6400

290

2400-6400

290

2400-6500

294

2600-6400

294

2600-6500

296

2800-6500

296

2800-6600

298

2600-6600

300

2600-6400

300

2800-6600

300

2800-6600

300

2800-6600

300

2800-6600

300

3000-6600

Duration @ .050” IN EX

294

233

241

294

233

241

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.530

.545

.530

.545

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

110

106

Hyd. Hyd.

112

108

Hyd. Hyd.

Rough idle, Hot Street & Bracket Racing. 10.0:1-up CR advised. 2800+ stall

Cam Notes

1

294 233 241 .530 .545 110 106 Hyd. Hyd. 1 Small Base Circle, Rough idle, Hot Street & Bracket Racing. 10.0:1-up CR advised. 2800+ stall

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

233

241

.530

.545

114

110

Hyd. Hyd.

Good idle, great mid range performance. 10.0:1+ CR, 2600+ stall & 3.73 or lower gears.

291

235

239

.600

.580

110

106

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

291

235

239

.600

.580

112

108

Lopey idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

291

235

239

.600

.580

114

110

Fair idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

108

104

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

110

106

Lopey idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

268

235

241

.475

.480

112

108

Fair idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

290

237

237

.560

.560

110

106

Rough idle, Street/Strip, strong mid range. 10.0:1 CR, 2500+ stall.

298

237

245

.560

.560

110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip applications. 10.0:1 CR, good exhaust, 3000+ stall.

298

237

245

.560

.560

112

108

Hyd. Hyd.

Lopey idle, Hot Street & Bracket Racing, great mid range. 10.0:1+ CR, 3000+ stall.

300

241

247

.545

.565

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.545

.565

112

108

Rough idle, Bracket Race with excellent mid & upper end horsepower.

302

243

249

.600

.600

110

106

Rough idle, Hot Street/Strip, good mid-range torque.

302

243

249

.600

.600

112

108

Rough idle, Hot Street/Strip, great with aftermarket EFI systems.

298

245

245

.560

.560

110

106

Rough idle, Street/Strip, Needs 3000+ stall, headers & good intake.

304

247

251

.550

.540

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

306

247

253

.565

.580

108

106

104

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall.

306

247

253

.565

.580

110

106

Hyd. Hyd.

Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

306 247 253 .565 .580 110 106 Hyd. Hyd. 1 Small Base Circle, Rough idle, needs good heads. Good upper mid-range. Needs 3500+ stall. 306

247

253

.565

.580

112

Lopey idle, broad mid to upper mid range power. 3500+ stall.

308

247

255

.600

.600

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

108 106

Hyd. Hyd. Hyd. Hyd.

1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

60

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 61

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Application Components Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10

Rocker Arms

Stud Girdles

90084

90100

90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084 90084

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301 94301

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

61

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:15 AM Page 62

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

183155-12 186755-10

186755-10S 186755-12 180355-10 181335-10 181335-12 186675-08 186675-10 189995

189995-S

Cam & Lifter Set Part No.

CL183155-12 CL186755-10

CL186755-10S CL186755-12 CL180355-10 CL181335-10 CL181335-12 CL186675-08 CL186675-10 NA

NA

Duration Advertised IN EX

300

3000-6800

304

2800-6700

304

2800-6700

304

2800-6700

304

2800-6700

304

2800-6400

304

2800-6400

312

3000-6800

312

3000-6800

308

Duration @ .050” IN EX

247

255

117492-10 117222-16 112192-14 117422-12 117692-12

CL117492-10 CL117492-10DL 4 CL117222-16 CL117222-16DL 4 CL112192-14 CL112192-14DL 4 CL117422-12 CL117422-12DL 4 CL117692-12 CL117692-12DL 4

.600

.600

Lobe Separation Intake Angle Centerline

112

308

251

255

.600

.580

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

308

251

255

.600

.580

110

308

251

255

.600

.580

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.555

.555

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

251

259

.600

.600

110

312

251

259

.600

.600

112

Rough idle, Broad mid to top end performance in 420+ ci.

Hyd. Hyd.

108 106 106

320

259

267

.600

.600

108

108

104

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR.

320

259

267

.600

.600

110

106

Rough idle, upper mid-range & top end power. Needs 11.0:1+ CR. Hydraulic Roller Special Order Camshaft.

Duration Advertised IN EX

279 294

3800-7000

295

4200-7200

299

4400-7800

1

106

106

1 1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Rough idle, best in large 420+ ci. engine. Great upper mid to top end performance.

• 262-400 1955-1998

2800-6600

Hyd. Hyd.

Hyd. Hyd.

287

Duration @ .050” IN EX

227

229

Hyd. Hyd.

Hyd. Hyd.

.395

.400

241

253

.460

.488

Lobe Separation Intake Angle Centerline

110

108

116

112

Near duplicate of the Chev Z28/LT1 370HP/350, cam (GM #3972178).

294

254

254

.485

.485

Valve Lash IN EX

.012

.018

114

110

.030

.030

.022

.022

.020

Rough idle, near duplicate of the famous Duntov 30-30 cam (GM #3849346)

307

257

269

.495

.515

112

108

Near duplicate of the Chev Off Road (1st design) cam (GM #3927140).

311

261

273

.515

.535

1

Hyd. Hyd.

Near duplicate of the Chev 290HP/283, 360HP/327, cam (GM #3736097).

291

1

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

1

1

Hyd. Hyd.

Hydraulic Roller Special Order Camshaft.

287

Cam Notes

108

Custom Grind Camshaft, Small Base Circle

2200-5800

Valve Lash IN EX

Small Base Circle, Upper mid-range & top end power. Needs 11.0:1+ CR.

American Muscle™ Mechanical Flat Tappet Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.50 Rockers IN EX

Pro Street/Bracket, good top end horsepower. Needs compression & 3500+ stall.

Custom Grind Camshaft

CHEVROLET SMALL BLOCK Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

112

108

Near duplicate of the Chev Off Road (2nd design) cam (GM #3965754).

.022

.025

1

Cam Notes

34

.022

1 1 1 1

Cam Notes: master note list on page 260

62

1 Stock (O.E.) valve springs cannot be used. 4 Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 34 Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 63

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 305/350 1987-1998 W/STEPPED NOSE (CARBURETED)

Hydraulic Roller Camshafts for OE Roller Application Components Lifters

Rev Kit

91113 3 91113FB

NA

91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB 91113 3 91113FB

91113 91113FB

91113 91113FB

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98213-K12 10 98213 98113-K12 10 98113

NA

98213-K12 10 98213 98113-K12 10 98113

NA NA NA NA NA NA --

98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 98213-K12 10 98213 98113-K12 10 98113 --

--

--

--

Steel Titanium Retainers Retainers

Valve Seals

97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 97132 10 97165 10 93017 10 93316 25 97174 10 --

--

CHEVROLET SMALL BLOCK

Valve Locks

--

--

--

--

--

--

--

Rocker Arms

Stud Girdles

90084

90100

90084 90084 90084 90084 90084 90084 90084 90084 --

--

90100 90100 90100 90100 90100 90100 90100 90100 --

--

Pushrods

95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 95201 95022 --

--

Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4

Valve Springs

NA

98212-K11 98212 98212-K12 10

NA

98212-K11 98212 98212-K12 10

NA NA

98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10 98212-K11 98212 98212-K12 10

Timing Set

92150 94475

94402

94301

92150 94475

94402

94301

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 --

--

94402 94402 94402 94402 94402 94402 94402

94402

94402

94301 94301 94301 94301 94301 94301 94301

94301

94301

• 262-400 1955-1998

American Muscle™ Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25 97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070

90100

Pushrods

95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

97112 97214 93005 93350 97132 10 97165 10 93017 10 93316 25

90005 90070

90100

95205 95010

92150 94475

94402

94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

63

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 64

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

305ci Sprint Car Mechanical Flat Tappet Camshafts Cam Part No.

116842-07 116822-07

Cam & Lifter Set Part No.

CL116842-07 CL116842-07DL 4 CL116822-07 CL116822-07DL 4

Duration Advertised IN EX

266

3000-6200

268

3000-6200

CHEVROLET SMALL BLOCK

268

Duration @ .050” IN EX

238

240

116772-06 111632-06

110432-06 110832-06 110792-06

Cam & Lifter Set Part No.

CL116772-06 CL116772-06DL 4 CL111632-06 CL111632-06DL 4 CL110432-06 CL110432-06DL 4 CL110832-06 CL110832-06DL 4 CL110792-06 CL110792-06DL 4

272

Duration Advertised IN EX

264 272

3200-6600

280

3400-7200

283

3200-7200

284

3000-7000

CHEVROLET SMALL BLOCK

110102-06 110102-08 110102-12 112062-06

112062-6S

Cam & Lifter Set Part No.

CL110102-06 CL110102-06DL 4 CL110102-08 CL110102-08DL 4 CL110102-12 CL110102-12DL 4 CL112062-06 CL112062-06DL 4 CL112062-06S CL112062-06SDL 4

240

244

270

Duration @ .050” IN EX

236

242

278

275

3000-6200

275

3000-6400

275

3000-6400

275

3000-6400

102

.510

.531

107

102

.016 .016

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.450

.450

Lobe Separation Intake Angle Centerline

106

102

244

250

.500

.500

106

102

.016

Valve Lash IN EX

.016 .016

286

252

258

.515

.515

106

102

.016

Cam Notes

1

.016

.016 .016

1

Cam Notes

1 1

.016

1,34

.016

1,34

Oval Track, .500” Lift Rule, 1/4 to 3/8 mile, also great open wheel with 1.8/1.7 rockers.

289 254 260 .515 .515 106 102 .016 .016 1,34 Late Model Stock, .500” Lift Rule (.550” w/1.6 rocker) best on 3/8 to 1/2 mile with limited intake. 294

256

266

.515

.515

106

102

.016

Oval Track, .500” Lift Rule (.550” w/1.6 rocker), fast banked 1/4 to 3/8 mile.

Duration Advertised IN EX

275

107

Valve Lash IN EX

Oval Track, .500” Lift Rule, Best on tight short tracks. Stong off corner. Low vacuum.

• 262-400 1955-1998

3000-6200

.531

Oval Track, .450” Lift Rule, Best on tight short tracks. Stong off corner.

Mechanical Flat Tappet Camshafts Cam Part No.

.510

Lobe Separation Intake Angle Centerline

305 Sprint Car, Short track with high banked turns. Strong upper end power.

• 262-400 1955-1998

2800-6200

Valve Lift w/1.50 Rockers IN EX

305 Sprint Car, Best on tighter short tracks. Strong out of the corners.

Oval Track Lift Rule Mechanical Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

281

Duration @ .050” IN EX

240

246

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.505

.520

Lobe Separation Intake Angle Centerline

106

Hot Street/Brackets. Lopey idle. Needs higher CR & gears.

281

240

246

.505

.520

108

Hot Street/Bracket. Needs 10.0+ CR, 3200+ stall & gears.

281

240

246

.505

.520

112

102

.022

.022

108

.022

.022

104

Fair idle, high torque, all purpose grind. 10.0+ CR, 3200+ stall & gears.

285

240

250

.525

.525

106

104

Super throttle response. Stump pulling low & mid-range power.

285

240

250

.525

.525

106

Valve Lash IN EX

104

.022 .022 .022

Cam Notes

.022 .022 .022

Small Base Circle, Super throttle response. Stump pulling. Low & mid-range power.

1 1 1 1 1

Cam Notes: master note list on page 260

64

1 Stock (O.E.) valve springs cannot be used. 4 Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 34 Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 65

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

CHEVROLET SMALL BLOCK

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070

90100

Pushrods

95205 95010 95205 95010

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Lifters

Rev Kit

91115 3 91118 4

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4

NA NA NA

98212-K12 10 98212

97132 10 97165 10 93017 10

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA NA

92150 94475

94402 94402

94200 94300 94200 94300

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475

94402 94402 94402

94200 94300 94200 94300 94200 94300

• 262-400 1955-1998

Mechanical Flat Tappet Camshaft Components Lifters

93350 93316 25

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

CHEVROLET SMALL BLOCK

92150 94475

Timing Set

• 262-400 1955-1998

Oval Track Lift Rule Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475

94402 94402 94402

94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

65

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 66

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Mechanical Flat Tappet Camshafts (cont.) Cam Part No.

112062-10 111002-06 111002-08

112072-06 112072-08 110892-06 112652-06 111012-08

110812-06

110912-06S 112352-06 112352-10 112672-06 112312-08

112312-08S 112312-10

112312-10S 112452-04 110822-06

110922-06S 111752-06

111752-06S 112662-06 111982-06

Cam & Lifter Set Part No.

CL112062-10 CL112062-10DL 4 CL111002-06 CL111002-06DL 4 CL111002-08 CL111002-08DL 4 CL112072-06 CL112072-06DL 4 CL112072-08 CL112072-08DL 4 CL110892-06 CL110892-06DL 4 CL112652-06 CL112652-06DL 4 CL111012-08 CL111012-08DL 4 CL110812-06 CL110812-06DL 4 CL110912-06S CL110912-06SDL 4 CL112352-06 CL112352-06DL 4 CL112352-10 CL112352-10DL 4 CL112672-06 CL112672-06DL 4 CL112312-08 CL112312-08DL 4 CL112312-08S CL112312-08SDL 4 CL112312-10 CL112312-10DL 4 CL112312-10S CL112312-10SDL 4 CL112452-04 CL112452-04DL 4 CL110822-06 CL110822-06DL 4 CL110922-06S CL110922-06SDL 4 CL111752-06 CL111752-06DL 4 CL111752-06S CL111752-06SDL 4 CL112662-06 CL112662-06DL 4 CL111982-06 CL111982-06DL 4

Duration Advertised IN EX

275

3000-6200

279

3200-6400

279

3200-6200

281

3200-6700

281

2500-6200

274

2600-6500

281

2600-6500

283

3000-6200

276

2500-6500

276

2500-6500

283

3000-7000

283

3000-7000

285

2800-6500

287

2600-6600

287

2600-6600

287

2800-6800

287

2800-6800

287

2600-6800

280

3000-7200

280

3000-7200

287

3000-6800

287

3000-6800

287

3000-7000

289

3200-7000

285

Duration @ .050” IN EX

240

250

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.525

.525

Lobe Separation Intake Angle Centerline

110

106

Valve Lash IN EX

.022

Rough idle, Street/Strip. Broad mid-range power. Needs 10.0:1 CR, 3000+ stall.

279

244

244

.510

.510

106

102

.022

.022

.022

.022

.022

Cam Notes

1 1

Oval track 2bbl. applications. Tight 1/4 to 3/8 mile. Needs good intake & exhaust.

279

244

244

.510

.510

108

104

Rough idle, super mid-range performance. Needs 11.0:1 CR-up.

281

246

246

.515

.515

106

102

Oval Track, high torque, short track. Strong off corner.

281

246

246

.515

.515

Hot Street/Bracket, good mid-range performance.

278

246

250

.515

.525

108

104

106

102

Short Track profile, best on 1/4 to 3/8 mile tracks. 2 barrel OK.

287

246

252

.520

.530

106

102

Short Track profile, best on 1/4 to 3/8 mile tracks. 2 barrel OK.

283

248

248

.510

.510

Street/Strip, powerful through entire rpm range.

280

248

252

.535

.540

108 106

104

Tight Lash Oval Track profile, great power coming off corners.

280

248

252

.535

.540

106

102 102

.022 .022 .016 .022 .022 .016 .016

.022

291

248

256

.510

.505

106

291

248

256

.510

.505

383+ Street/Strip. Needs 10.0:1 CR, 2800+ stall.

285

250

250

.525

.525

110

106

102

106

.022

.022

1

.022

1

.016

1

.022 .022 .016 .016

Small Base Circle, Tight Lash Oval Track profile, great power coming off corners.

1/4 to 3/8 mile tracks. Great all-around short track cam.

1

.022

1 1

1,34 1,34 1

.022

102

.022

.022

104

.022

.022

1 1

Best on 1/4 to 3/8 mile tight tracks. Big torque out of the corners. Needs headers.

291

252

256

.530

.535

108

Hot Street/Strip, 10.0:1, 3000+ stall & single plane intake.

291

252

256

.530

.535

108

104

.022

Small Base Circle, Hot Street/Strip, 10.0:1, 3000+ stall & single plane intake.

291

252

256

.530

.535

110

Hot Street/Strip, 383+ cubic inch, 10.0:1, 2800+ stall.

291

252

256

.530

.535

110

106 106

.022 .022

Small Base Circle, Hot Street/Strip, 383+ cubic inch, 10.0:1, 2800+ stall.

295

252

260

.530

.555

383+ Street/Strip. Needs 10.0:1 CR, 2800+ stall.

288

252

260

.540

.560

104 106

100 102

Great mid & top end Oval Track tight lash cam. Good on dirt or asphalt.

288

252

260

.540

.560

106

102

.022

299

252

261

.530

.525

106

102

.022

.016

.016

299

252

261

.530

.525

106

102

.022 .022

1

.022

.016

Small Base Circle, Great mid & top end OT tight lash cam. Good on dirt or asphalt.

Best on 3/8 to 1/2 mile fast tracks. Super mid & upper RPM cam.

1

.022

.022 .016

1

.022

1 1

1,34 1,34

.022

Small Base Circle, Best on 3/8 to 1/2 mile fast tracks. Super mid & upper RPM cam.

299

252

264

.545

.555

106

102

.022

Best on fast 1/4 to 3/8 mile. Larger cubic inch 383+ recommended. 11.0:1+.

285

254

250

.550

.525

106

102

.022

.022 .022

Oval Track with 2bbl. carb. 1/4-3/8 banked track. Needs 9.5:1+ CR, good exhaust.

1 1 1 1

Cam Notes: master note list on page 260

66

1 Stock (O.E.) valve springs cannot be used. 4 Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 34 Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 67

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98218-K12 10 98218 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

67

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 68

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Mechanical Flat Tappet Camshafts (cont.) Cam Part No.

112092-05 112082-05 112542-06

112542-06S 112532-06 112322-08 112102-12 118302-06

118302-06S 112512-06 112262-06 112332-08 112642-10 112552-06

112552-06S 112552-10

112552-10S 119992

119992-S

119992-P55 119996

119996-S

Cam & Lifter Set Part No.

Duration Advertised IN EX

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

CL112092-05 291 299 256 264 .535 .555 105 99 .022 .022 1 CL112092-05DL 4 3000-7400 Rough idle, works well in Pro-Street or heavy Bracket car. CL112082-05 291 301 256 266 .505 .505 105 99 .022 .022 1 CL112082-05DL 4 2800-7000 Great power, torque & throttle response. Great Sportsman cam. CL112542-06 295 289 260 254 .555 .550 106 102 .022 .022 1 CL112542-06DL 4 3200-7200 Rough idle, Oval Track. Banked 3/8 to 1/2 mile tracks. 11.5:1+ CR. CL112542-06S 295 289 260 254 .555 .550 106 102 .022 .022 1 CL112542-06SDL 4 3200-7200 Small Base Circle, Rough idle, Oval Track. Banked 3/8 to 1/2 mile tracks. 11.5:1+ CR. CL112532-06 295 299 260 264 .555 .555 106 102 .022 .022 1 CL112532-06DL 4 3200-7200 Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners. 350-383. CL112322-08 295 303 260 268 .555 .574 108 104 .022 .022 1 CL112322-08DL 4 3200-7400 Bracket Race 350-383, or 3/8 to 1/2 mile 383-400. Needs 12.0:1+ CR. CL112102-12 297 309 262 274 .510 .535 112 108 .022 .022 1 CL112102-12DL 4 3400-7400 Hot Pro-Street & Bracket Racing. Works well with NOS. CL118302-06 292 296 264 268 .555 .550 106 102 .016 .016 1,34 CL118302-06DL 4 3400-7200 Oval track, Dirt or asphalt, 3/8 to 1/2 mile with fast corners CL118302-06S 292 296 264 268 .555 .550 106 102 .016 .016 1,34 CL118302-06SDL 4 3400-7200 Small Base Circle, Oval track, Dirt or asphalt, 3/8 to 1/2 mile with fast corners. CL112512-06 303 309 268 274 .550 .535 106 102 .022 .022 1 CL112512-06DL 4 3200-7200 Rough idle, Drag Race. Higher CR, stall speed & lower gears. CL112262-06 303 313 268 278 .574 .550 106 102 .022 .022 1 CL112262-06DL 4 4000-7500 Serious Competition only. Needs the best of everything. CL112332-08 303 313 268 278 .574 .574 108 104 .022 .022 1 CL112332-08DL 4 3600-7400 Bracket Racer special. Super strong mid-range & top end. CL112642-10 322 322 276 276 .591 .591 110 106 .022 .022 1 CL112642-10DL 4 3500-7500 Serious Competition 383-406, Requires 12.0:1+ CR, good single plane intake. CL112552-06 313 321 278 286 .550 .570 106 102 .022 .022 1 CL112552-06DL 4 4200-7800 Rough idle, Large 400+ Bracket/Class cam. Needs good heads & intake. CL112552-06 313 321 278 286 .550 .570 106 102 .022 .022 1 CL112552-06DL 4 4200-7800 Small Base Circle, Rough idle, Large 400+ Bracket/Class cam. Needs good heads & intake. CL112552-10 313 321 278 286 .550 .570 110 106 .022 .022 1 CL112552-10DL 4 4200-8000 Large 400+ Bracket, broad upper mid range & top end power. Needs good heads. CL112552-10 313 321 278 286 .550 .570 110 106 .022 .022 1 CL112552-10DL 4 4200-8000 Small Base Circle, Large 400+ Broad upper mid range & top end power. Needs good heads. NA Custom Grind Camshaft 1 NA

NA

NA

NA

Mechanical Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

1

Mechanical Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Special Core

Mechanical Flat Tappet Special Order Camshaft.

Custom Grind Camshaft

4/7 Swap Mechanical Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Mechanical Flat Tappet Special Order Camshaft.

1

1,22 1,22

Cam Notes: master note list on page 260

68

1 4 22 34

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Ignition firing order must be changed to 1-8-7-3-6-5-4-2. Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 69

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 91118 91115 91118 91115 91118 91115 91118 91115 91118

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

NA NA NA NA NA NA NA NA NA NA NA NA NA NA --

98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98212-K12 10 98212 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25 98213-K12 10 98213 97132 10 97165 10 93017 10 93350 98445-K12 25 98445 25 97128 10 97216 10 93316 25

-----

--

--

--

--

--

--

--

--

--

--

--

--

----

----

----

----

----

----

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 ------

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 ------

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 ------

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94402 94402 94402 94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

69

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 70

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Mechanical Flat Tappet Camshafts Cam Part No.

114032-06

114032-06S 114042-06

114042-06S 114822-06

114822-06S 114012-06

114012-06S 114532-06

114532-06S 114052-06

114052-06S 114022-06

114022-06S 114542-06

114542-06S 114552-06

114552-06S 119996

119996-S

Cam & Lifter Set Part No.

Duration Advertised IN EX

Duration @ .050” IN EX

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

CL114032-06 283 287 248 252 .535 .530 106 102 .022 .022 1,22 CL114032-06DL 4 3000-6800 Oval Track, 2bbl. 1/4 to 3/8 tight, with good intake & exhaust. CL114032-06S 283 287 248 252 .535 .530 106 102 .022 .022 1,22 CL114032-06SDL 4 3000-6800 Small Base Circle, Oval Track, 2bbl. 1/4 to 3/8 tight, with good intake & exhaust. CL114042-06 287 295 252 260 .545 .535 106 102 .022 .022 1,22 CL114042-06DL 4 3200-6800 Oval Track, 4bbl. 1/4 to 3/8 tight, with good intake, exhaust, 12.0:1+ CR. CL114042-06S 287 295 252 260 .545 .535 106 102 .022 .022 1,22 CL114042-06SDL 4 3200-6800 Small Base Circle, Oval Track, 4bbl. 1/4 to 3/8 tight, with good intake, exhaust, 12.0:1+ . CL114822-06 280 288 252 260 .540 .560 106 102 .016 .016 1,22,34 CL114822-06DL 4 3200-6800 Oval Track, tight 1/4 to 3/8 mile. 12.0:1+ CR, single plane intake, headers. CL114822-06S 280 288 252 260 .540 .560 106 102 .016 .016 1,22,34 CL114822-06SDL 4 3200-6800 Small Base Circle, Oval Track, tight 1/4 to 3/8 mile. 12.0:1+ CR, headers. CL114012-06 291 301 256 266 .535 .555 106 102 .022 .022 1,22 CL114012-06DL 4 3800-7200 Drag Race with 4000+ stall, 11.0:1+ CR. Best with 1.6 intake rockers. CL114012-06S 291 301 256 266 .535 .555 106 102 .022 .022 1,22 CL114012-06SDL 4 3800-7200 Small Base Circle, Drag Race with 4000+ stall, 11.0:1+ CR. Best with 1.6 intake rockers. CL114532-06 295 299 260 264 .555 .555 106 102 .022 .022 1,22 CL114532-06DL 4 3200-7200 Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners. 350-383. CL114532-06S 295 299 260 264 .555 .555 106 102 .022 .022 1,22 CL114532-06SDL 4 3200-7200 Small Base Circle, Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners. 350-383. CL114052-06 295 301 260 266 .565 .555 106 102 .022 .022 1,22 CL114052-06DL 4 3400-7200 Oval Track, 360ci+, 1/4 to 3/8 tight, with good intake, exhaust, 12.0:1+ CR. CL114052-06S 295 301 260 266 .565 .555 106 102 .022 .022 1,22 CL114052-06SDL 4 3400-7200 Small Base Circle, Oval Track, 360ci+, 1/4 to 3/8 tight, with good intake, exhaust, 12.0:1+. CL114022-06 301 309 266 274 .555 .555 106 102 .022 .022 1,22 CL114022-06DL 4 4200-7400 Drag Race with 12.0:1+ CR, 4800+ stall. Needs good heads & intake. CL114022-06S 301 309 266 274 .555 .555 106 102 .022 .022 1,22 CL114022-06SDL 4 4200-7400 Small Base Circle, Drag Race with 12.0:1+ CR, 4800+ stall. CL114542-06 303 309 268 274 .550 .535 106 102 .022 .022 1,22 CL114542-06DL 4 3200-7200 Rough idle, Drag Race. Higher CR, stall speed & lower gears. CL114542-06S 303 309 268 274 .550 .535 106 102 .022 .022 1,22 CL114542-06SDL 4 3200-7200 Small Base Circle, Rough idle, Drag Race. Higher CR, stall speed & lower gears. CL114552-06 313 321 278 286 .550 .570 106 102 .022 .022 1,22 CL114552-06DL 4 4500-8000 Large 400+ Bracket/Class cam. Needs good heads & intake. CL114552-06S 313 321 278 286 .550 .570 106 102 .022 .022 1,22 CL114552-06SDL 4 4500-8000 Small Base Circle, Large 400+ Bracket/Class cam. Needs good heads & intake. NA Custom Grind Camshaft 1,22 NA

4/7 Swap Mechanical Flat Tappet Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Mechanical Flat Tappet Special Order Camshaft.

1,22

Cam Notes: master note list on page 260

70

1 Stock (O.E.) valve springs cannot be used. 22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2. 34 Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 71

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 91118 91115 91118

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25

NA

98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA --

98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25 98445-K12 25 98445 25 97132 10 97165 10 93017 10 93350 98632-K12 25 98632 25 97128 10 97216 10 93316 25

--

---

---

---

---

---

---

Rocker Arms

Stud Girdles

90005 90070

90100

90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 90005 90070 ---

90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 90100 ---

Pushrods

95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 95205 95010 ---

Fuel Pump Distributor Pushrod Gear

Timing Set

92150 94475

94402

94200 94300

92150 94475

94402

94200 94300

92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475 92150 94475

92150 94475 92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94402 94402

94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300 94200 94300

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

71

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 72

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Big Bottle Cams™- Nitrous Oxide Mechanical Roller Cams Firing Order: 1•8•4•3•6•5•7•2 Cam Part No.

Cam & Lifter Set Part No.

111133-12S

NA

111133-12

110613-12

110613-12S 111113-12

111113-12S 110673-12

110673-12S 110513-12

110513-12S 110513-14

110513-14S 111083-12

111083-12S 111083-14

111083-14S 110393-14

110393-14S 111073-14S 119993

119993-S 119999 119997 118997

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA NA

Duration Advertised IN EX

289

3400-7400

289

3400-7400

291

3600-7600

291

3600-7600

295

3800-7800

295

3800-7800

299

4000-8000

299

4000-8000

305

4400-8200

305

4400-8200

305

4400-8600

305

4400-8600

307

4400-8600

307

4400-8600

307

4400-8800

307

4400-8800

309

4600-9000

309

4600-9000

313

5000-9000

299

Duration @ .050” IN EX

257

267

Valve Lift w/1.50 Rockers IN EX

.600

.600

Mid & upper RPM torque, 150+ plate systems.

299

257

267

.600

.600

Lobe Separation Intake Angle Centerline

112

108

112

108

Small Base Circle, mid & upper RPM torque, 150+ plate systems.

307

259

275

.640

.630

112

108

Mid & upper RPM horsepower, 250+ plate systems.

307

259

275

.640

.630

112

108

Small Base Circle, Mid & upper RPM horsepower, 250+ plate systems.

305

263

273

.640

.645

112

Mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

305

263

273

.640

.645

112

108 108

Valve Lash IN EX

.022

.022

.022

.022

.022 .022 .022 .022

Small Base Circle, mid & upper end torque & power. Needs 12.5:1 CR-up.

311

267

279

.645

.640

112

108

.022

Competition, 383+ ci. Mid to upper end power. Multi-stage nitrous system.

311

267

279

.645

.640

112

108

.022

.022 .022 .022 .022

.022 .022

Small Base Circle, Competition, 383+ ci. Mid to upper end power. Multi-stage system.

319

273

287

.680

.650

112

108

.022

Competition, 400+ ci. Mid to upper end power. Multi-stage nitrous system.

319

273

287

.680

.650

112

108

.022

.022 .022

Small Base Circle, Competition, 400+ ci. Mid to upper end power. Multi-stage system.

319

273

287

.680

.650

114

110

Competition, 400+ cubic inch with pro heads. Multi-stage system.

319

273

287

.680

.650

114

110

.022 .022

.022 .022

Small Base Circle, Competition, 400+ cubic inch with pro heads. Multi-stage system.

317

275

285

.630

.630

112

108

Competition, 383+ cubic inch. Good top end. Multi-stage system.

317

275

285

.630

.630

112

108

.022 .022

.022 .022

Small Base Circle, Competition, 383+ cubic inch. Good top end. Multi-stage system.

317

275

285

.630

.630

114

Competition profile, good top end power. Plate or plumbed.

317

275

285

.630

.630

114

110 110

.022 .022

Small Base Circle, Competition profile, good top end power. Plate or plumbed.

323

277

291

.675

.675

114

110

Competition, 400+ cubic inch with big heads. Multi-stage system.

323

277

291

.675

.675

114

110

.022 .022

.022 .022 .022 .022

Small Base Circle, Competition, 400+ cubic inch with big heads. Multi-stage system.

327

281

295

.730

.715

114

110

Small Base Circle, all out Competition, Multi-stage nitrous systems.

Custom Grind Camshaft

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

Custom Grind Camshaft, with Cast Distributor Gear Custom Grind Camshaft, with 50-55mm Bearing, LS (C) Firing Order Mechanical Roller Special Order Camshaft.

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Mechanical Roller Special Order Camshaft. Mechanical Roller Special Order Camshaft.

.022

1,2,5

1,2,5

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, with 50-55mm Bearing

.022

Cam Notes

1,2,5

1,2,5,24

Cam Notes: master note list on page 260

72

1 2 5 24

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-2-6-5-4-3.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 73

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Big Bottle Cams™ - Nitrous Oxide Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91117 91121

90135

NA

91117 91121

90135

90072 7

90101 7 90105 7

NA

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

91121 91134

90135

NA

--

--

--

--

--

--

--

--

--

--

--

Stud Girdles

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135

91121 91134

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

--

--

--

--

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

97222 10 93017 10 93311 25 98738-A25 NA 98825 25 97130 10 97220 10 --

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 --

--

--

--

--

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 --

--

--

--

--

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 --

--

--

--

--

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

92151 94475

92151 94475

92151 94475

92151 94475

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94400 94402

94400 94402

94400 94402

94400 94402

94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

94300

94300

94300

94300

94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

73

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 74

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Big Bottle Cams™ - 4/7 Swap Mechanical Roller Cams Cam Part No.

Cam & Lifter Set Part No.

114143-12S

NA

114143-12 114613-12

114613-12S 114413-12

114413-12S 114673-12

114673-12S 114673-14

114673-14S 114513-12

114513-12S 114513-14

114513-14S 114083-12

114083-12S 114083-14

114083-14S 114393-14

114393-14S 114073-14S 114113-14S 119994

119994-S

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

NA

NA

NA

Duration Advertised IN EX

289

4000-7800

289

4000-7800

291

3600-7600

291

3600-7600

295

3800-7800

295

3800-7800

299

4000-8000

299

4000-8000

299

4000-8000

299

4000-8000

305

4400-8200

305

4400-8200

305

4400-8600

305

4400-8600

307

4400-8600

307

4400-8600

307

4400-8800

307

4400-8800

309

4600-9000

309

5000-9000

313

5000-7800

313

5000-7800

Duration @ .050” IN EX

299

257

267

307

259

275

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

.600

.600

.640

.630

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

112

108

.022

.022

1,2,5,22

112

108

.022

.022

1,2,5,22

.022

.022

1,2,5,22

Mid & upper RPM torque, great with 1.6 rockers. Best with plate systems.

299 257 267 .600 .600 112 108 .022 .022 1,2,5,22 Small Base Circle, mid & upper RPM torque, great with 1.6 rockers. Best with plate systems.

Mid & upper RPM horsepower, 250+ plate systems.

307

259

275

.640

.630

112

108

Small Base Circle, Mid & upper RPM horsepower, 250+ plate systems.

305

263

273

.640

.645

112

Mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

305

263

273

.640

.645

112

108 108

.022 .022

Small Base Circle, mid & upper end torque & power. Needs 12.5:1 CR-up.

311

267

279

.645

.640

112

108

.022

Competition, 383+ ci. Mid to upper end power. Multi-stage nitrous system.

311

267

279

.645

.640

112

108

.022

.022 .022

.022 .022

Small Base Circle, Competition, 383+ ci. Mid to upper end power. Multi-stage system.

311

267

279

.645

.640

114

110

.022

Competition, 383+ ci. Mid to upper end power. Multi-stage nitrous system.

311

267

279

.645

.640

114

110

.022

.022 .022

Small Base Circle, Competition, 383+ ci. Mid to upper end power. Multi-stage system.

319

273

287

.680

.650

112

108

.022

Competition, 400+ ci. Mid to upper end power. Multi-stage nitrous system.

319

273

287

.680

.650

112

108

.022

.022 .022

Small Base Circle, Competition, 400+ ci. Mid to upper end power. Multi-stage system.

319

273

287

.680

.650

114

110

Competition, 400+ cubic inch with pro heads. Multi-stage system.

319

273

287

.680

.650

114

110

.022 .022

.022 .022

Small Base Circle, Competition, 400+ cubic inch with pro heads. Multi-stage system.

317

275

285

.630

.630

112

108

Competition, 383+ cubic inch. Good top end. Multi-stage system.

317

275

285

.630

.630

112

108

.022 .022

.022 .022

Small Base Circle, Competition, 383+ cubic inch. Good top end. Multi-stage system.

317

275

285

.630

.630

114

Competition profile, good top end power. Plate or plumbed.

317

275

285

.630

.630

114

110 110

.022 .022

Small Base Circle, Competition profile, good top end power. Plate or plumbed.

323

277

291

.675

.675

114

110

Competition, 400+ cubic inch with big heads. Multi-stage system.

323

277

291

.675

.675

114

110

Small Base Circle, all out Competition, Multi-stage nitrous systems.

327

281

295

.730

.715

114

110

Small Base Circle, all out Competition, Multi-stage nitrous systems.

329

281

297

.705

.716

114

110

.022 .022

.022

.022

.022

.022

.022 .022

.022 .022

Small Base Circle, Big cubic inch, all out Competition, Multi-stage nitrous systems.

Custom Grind Camshaft

4/7 Swap Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Mechanical Roller Special Order Camshaft.

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

Cam Notes: master note list on page 260

74

1 2 5 22

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 75

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Big Bottle Cams™ - 4/7 Swap Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

--

--

--

Stud Girdles

NA

90135

--

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA NA --

--

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

-97222 10 93017 10 93316 25 98738-A 25 98825 25 97130 10 97220 10 -97222 10 93017 10 93316 25 98738-A 25 98825 25 97130 10 97220 10 --

--

--

--

--

--

--

--

--

--

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 --

--

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 --

--

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 --

--

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

92151 94475

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94400 94402

94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

94300

94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

75

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 76

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111213-10S

NA

111213-10 111203-10

111203-10S 110183-08

110183-08S 110183-10

110183-10S 110173-08

110173-08S 110173-10

110173-10S 110753-06

110753-06S 110753-08S 110753-10

110753-10S 111313-06

111313-06S 111313-08

111313-08S 111313-10

111313-10S 111313-12

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Duration Advertised IN EX

261

2000-6000

261

2000-6000

269

2500-6500

269

2500-6500

269

2500-6500

269

2500-6500

269

2500-6500

269

2500-6500

273

2800-6800

273

2800-6800

273

2800-7000

273

2800-7000

277

3200-7400

277

3200-7400

277

3200-7400

277

3200-7400

277

3200-7400

279

3000-7200

279

3000-7200

279

3000-7400

279

3000-7400

279

3000-7400

279

3000-7400

279

2800-7400

269

Duration @ .050” IN EX

229

237

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.555

.555

Lobe Separation Intake Angle Centerline

110

106

Valve Lash IN EX

.022

.022

Noticeable idle, good for Weekend Street Cruiser. Should have 9.0:1 CR, 2000+ stall.

269

229

237

.555

.555

110

106

.022

.022

Small Base Circle, Noticeable idle, Weekend Street Cruiser. 9.0:1 CR, 2000+ stall.

269

237

237

.555

.555

110

106

.022

Fair idle, Street Performance/mild Strip. Recommend 9.5:1 CR, 2500+ stall.

269

237

237

.555

.555

110

106

.022

.022 .022

Small Base Circle, Street Performance/mild Strip. Recommend 9.5:1, 2500+ stall.

275

237

243

.555

.555

108

104

Fair idle, Weekend Cruiser/mild Strip. 2500+ stall recommended.

275

237

243

.555

.555

108

104

.022 .022

.022 .022

Small Base Circle, Fair idle, Weekend Cruiser/mild Strip. 2500+ stall recommended.

275

237

243

.555

.555

110

106

.022

Fair idle, Weekend Cruiser/Power Tour favorite. 2500+ stall recommended.

275

237

243

.555

.555

110

106

.022

Small Base Circle, Fair idle, Weekend Cruiser/Power Tour favorite. 2500+ stall.

279

241

247

.570

.570

108

104

.022

Fair idle, Street/Strip. Great mid-range. Should have 10.0:1 CR, 2500+ stall.

279

241

247

.570

.570

108

104

.022

.022 .022

.022 .022

Small Base Circle, Fair idle, Street/Strip. Great mid-range. 10.0:1 CR, 2500+ stall.

279

241

247

.570

.570

110

106

.022

.022

Fair idle, High performance Street/Mild Bracket. Should have 10.0:1 CR, 2800+ stall.

279

241

247

.570

.570

110

106

.022

.022

Small Base Circle, Fair idle, High performance Street/Mild Bracket. 10.0:1 CR, 2800+.

287

245

255

.600

.600

106

102

.022

Rough idle, Great mid-range torque & power. Needs good intake & exhaust.

287

245

255

.600

.600

106

102

.022

.022 .022

Small Base Circle, Rough idle, Great mid-range torque & power. Needs good intake.

287

245

255

.600

.600

108

104

.022

.022

Small Base Circle, Rough idle, Great mid-range torque & power. Needs good intake.

287

245

255

.600

.600

110

106

.022

.022

Mid range torque with top end horsepower. Needs 10.0:1 CR, good intake & exhaust..

287

245

255

.600

.600

110

106

.022

Small Base Circle, Mid range torque with top end horsepower. 10.0:1 CR.

279

247

247

.585

.585

Fair idle, Street performance mild Oval Track use.

279

247

247

.585

.585

106

102

106

102

Small Base Circle, Fair idle, Street performance mild Oval Track use.

279

247

247

.585

.585

108

104

.022

.022

.022

.022

.022

Fair idle, Hot Street/Strip. Good mid-range power. 10.0:1 CR, 3400+ stall.

279

247

247

.585

.585

108

104

.022

.022

.022 .022

Small Base Circle, fair idle, Hot Street/Strip. Good mid-range power. 10.0:1 CR, 3400+.

279

247

247

.585

.585

110

Fair idle, Pro-Street cam. Works well with small NOS system.

279

247

247

.585

.585

110

106 106

.022 .022

Small Base Circle, fair idle, Pro-Street cam. Works well with small NOS system.

279

247

247

.585

.585

112

Fair idle, Pro-Street cam. Works well with small NOS system.

108

.022

.022 .022 .022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260

76

1 2 5

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 77

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Lifters

Rev Kit

91150 91152

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25

91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91150 91152 91152 91134 91152 91134 91152 91134 91152 91134 91152 91134 91150 91152

90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90132 90135 90135 90135 90135 90135 90135

90132 90135

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

90070 90072 7

90100 90101 7

98541 25 97128 10 97220 10 93017 10 93316 25

90070 90072 7

90100 90101 7

98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

91150 91152

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

91150 91152 91150 91152 91150 91152

90132 90135 90132 90135 90132 90135 90132 90135

NA NA NA NA

Stud Girdles

98541 25 97128 10 97220 10 93017 10 93316 25

91150 91152 91150 91152

Rocker Arms

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005 98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7 90070 90072 7

90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7 90100 90101 7

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

77

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 78

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111153-06

NA

111313-12S 111153-06S 111153-08

111153-08S 111013-06

111013-06S 111013-10 111163-06

111163-06S 111163-08

111163-08S 111163-10

111633-06

111633-06S 111633-08

111633-08S 110773-06

110773-06S 110773-08

110773-08S 110773-14S 111133-06

111133-06S

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

NA

NA

Duration Advertised IN EX

279

2800-7400

279

3000-7400

279

3000-7400

279

3000-7400

279

3000-7400

283

3600-7600

283

3600-7600

283

3600-7600

287

3800-7800

287

3800-7800

287

3800-7800

287

3800-7800

287

3800-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

279

Duration @ .050” IN EX

247

247

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.585

.585

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

.022

Small Base Circle, fair idle, Pro-Street cam. Works well with small NOS system.

281

247

249

.585

.585

Lopey idle, great Oval Track & heavy Drag car.

281

247

249

.585

.585

106

102

106

102

Small Base Circle, lopey idle, great Oval Track & heavy Drag car.

281

247

249

.585

.585

108

104

Choppy idle, Should have 10.0:1+ CR, single plane intake, 2800+ stall.

281

247

249

.585

.585

108

104

.022

.022

.022

.022

.022

.022 .022

.022 .022

Small Base Circle, choppy idle, Should have 10.0:1+ CR, single plane intake, 2800+ stall.

289

251

257

.640

.640

106

102

Strong mid-range torque, rough idle. Oval Track & Bracket cars.

289

251

257

.640

.640

106

102

.022 .022

.022 .022

Small Base Circle, strong mid-range torque, rough idle. Oval Track & Bracket cars.

289

251

257

.640

.640

110

106

Strong mid-range horsepower, rough idle. Oval Track & Bracket cars.

293

255

261

.600

.620

106

Good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

293

255

261

.600

.620

106

102 102

.022

.022 .022

.022

.022 .022

Small Base Circle, good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

293

255

261

.600

.620

108

104

Good mid-range power, rough idle. Needs 11.0:1 CR-up. Brackets.

293

255

261

.600

.620

108

104

.022 .022

.022 .022

Small Base Circle, good mid-range HP, rough idle. Needs 11.0:1 CR-up. Brackets.

293

255

261

.600

.620

110

106

Good mid-range power, rough idle. Needs 11.0:1 CR-up. Brackets.

295

257

263

.615

.615

106

102

.022

.022

Oval Track/Mild Bracket, mid range torque & top end power. 10.5-11.0:1 CR.

295

257

263

.615

.615

106

102

.022

Small Base Circle, Oval Track/Mild Bracket, mid range torque & top end power.

295

257

263

.615

.615

108

104

.022

Bracket/Oval Track, Broad mid-range power. Needs good intake & exhaust.

295

257

263

.615

.615

108

104

.022

.022

.022 .022 .022 .022

Small Base Circle, Bracket/Oval Track, Broad mid-range power. Good intake & exhaust.

295

257

263

.640

.640

106

102

.022

Strong mid-range torque & top end power. Needs 10.5-11.5:1 CR, good intake.

295

257

263

.640

.640

106

102

.022

.022 .022

Small Base Circle, Strong mid-range torque & top end power. Needs 10.5-11.5:1 CR.

295

257

263

.640

.640

108

104

Strong mid range. Needs good single plane intake, 10.5:1+ CR.

295

257

263

.640

.640

108

104

.022 .022

.022 .022

Small Base Circle, Strong mid range. Needs good single plane intake, 10.5:1+ CR.

295

257

263

.640

.640

114

110

.022

.022

Small Base Circle, Strong mid range. Needs good single plane intake, 10.5:1+ CR.

299

257

267

.600

.600

106

102

Strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.

299

257

267

.600

.600

106

102

.022 .022

.022 .022

Small Base Circle, strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260

78

1 2 5

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 79

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Lifters

Rev Kit

91150 91152

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

91150 91152

90132 90135

NA

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

91150 91152

91150 91152 91150 91152 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121 91117 91121

91121 91134

90132 90135

90132 90135 90132 90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

90135

NA

NA NA

NA NA NA NA NA NA NA NA

NA

NA

91121 91134

90135

NA

91121 91134 91121 91134 91121 91134

90135 90135 90135

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

90070 90072 7

90100 90101 7

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

90135 90135

90100 90101 7

NA

91121 91134 91121 91134

90070 90072 7

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

NA

NA NA NA NA

Stud Girdles

98541 25 97128 10 97220 10 93017 10 93316 25 98223 97113 NA 93005

NA NA

Rocker Arms

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90070 90072 7 90070 90072 7 90070 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7

90100 90101 7 90100 90101 7 90100 90101 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010 95010 95010 95010

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

79

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 80

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111133-08S

NA

111133-08 111133-10

111133-10S 111133-12

111133-12S 112323-06

112323-06S 112323-08

112323-08S 110713-06

110713-06S 110713-08

110713-08S 112313-06

112313-06S 112313-08

112313-08S 110013-06

110013-06S 110013-08

110013-08S 110013-10

110013-10S

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Duration Advertised IN EX

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-8000

289

4000-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

293

4200-8000

293

4200-8000

293

4200-8000

293

4200-8000

295

4000-7800

295

4000-7800

295

4000-8000

295

4000-8000

295

4000-8000

295

4000-8000

299

Duration @ .050” IN EX

257

267

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.600

.600

Lobe Separation Intake Angle Centerline

108

104

Mid & upper RPM torque, good in banked Oval Track & Bracket.

299

257

267

.600

.600

108

104

Valve Lash IN EX

.022 .022

.022 .022

Small Base Circle, mid & upper RPM torque, good in banked Oval Track & Bracket.

299

257

267

.600

Mid & upper RPM torque, OK w/NOS.

299

257

267

.600

.600 .600

110

106

110

106

Small Base Circle, mid & upper RPM torque, OK w/NOS up to 250HP.

299

257

267

.600

.600

112

108

Mid & upper RPM torque. Heavier car OK. Great w/NOS.

299

257

267

.600

.600

112

108

.022 .022 .022 .022

Small Base Circle, mid & upper RPM torque. Heavier car OK. Great w/NOS.

295

259

263

.640

.640

106

102

.022

Great mid to upper range torque. Requires good heads, intake & exhaust.

295

259

263

.640

.640

106

102

.022

.022 .022 .022 .022

.022 .022

Small Base Circle, Great mid to upper range torque. Requires good heads & intake.

295

259

263

.640

.640

108

104

.022

Oval Track/Drag, mid range torque with top end power. Needs good heads.

295

259

263

.640

.640

108

104

Small Base Circle, Oval Track/Drag, mid range torque & top end power.

299

259

267

.675

.645

360-383ci Sprint, Modified. Super fast tracks.

299

259

267

.675

.645

106

102

106

102

Small Base Circle, 360-383ci Sprint, Modified. Super fast tracks.

299

259

267

.675

.645

108

104

.022 .022 .022 .022

410ci Sprint, Modified. Super fast tracks. Requires good heads & intake.

299

259

267

.675

.645

108

104

.022

.022 .022 .022 .022 .022 .022

Small Base Circle, 410ci Sprint, Modified. Super fast tracks. Requires good heads.

297

261

265

.620

.620

106

Circle Track, high torque. Great 360 Sprint on tacky tracks.

297

261

265

.620

.620

106

102 102

.022 .022

Small Base Circle, Circle Track, high torque. Great 360 Sprint on tacky tracks.

297

261

265

.620

.620

108

104

.022

.022 .022 .022

Broad range power with mid to upper end torque. 360 Sprint dry slick or Bracket.

297

261

265

.620

.620

108

104

Small Base Circle, Broad range power with mid to upper end torque.

301

263

269

.630

.620

106

102

355-383ci Drag, 1/8 or 1/4 mile, heavy car. 11.0:1+ CR, 4000+ stall.

301

263

269

.630

.620

106

102

.022 .022 .022

.022 .022 .022

Small Base Circle, 355-383ci Drag, 1/8 or 1/4 mile, heavy car. 11.0:1+ CR, 4000+ stall.

301

263

269

.630

.620

108

104

410 Sprint or big inch Bracket. Strong upper mid-range.

301

263

269

.630

.620

108

104

.022 .022

Small Base Circle, 410 Sprint or big inch Bracket. Strong upper mid-range.

301

263

269

.630

.620

110

410 Sprint or big inch Bracket. Upper mid-range & top end.

301

263

269

.630

.620

110

106 106

.022 .022

Small Base Circle, 410 Sprint or big inch Bracket. Upper mid-range & top end.

.022 .022

.022 .022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260

80

1 2 5

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 81

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

91121 91134

90135 90135

Stud Girdles

NA

90135

91121 91134

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA NA NA NA

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

81

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 82

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111223-06S

NA

111223-06 111223-08 111113-06

111113-06S 111113-08

111113-08S 111113-10

111113-10S 111113-12

111113-12S 111103-06

111103-06S 111103-08

111103-08S 111123-06

111123-06S 111123-08

111123-08S 111123-10

111123-10S 112183-06

112183-06S 112183-08

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Duration Advertised IN EX

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

295

4200-8200

299

4400-8200

299

4400-8200

299

4400-8200

299

4400-8200

299

4400-8400

299

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

303

Duration @ .050” IN EX

263

271

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.675

.625

Lobe Separation Intake Angle Centerline

106

Great in large cubic inch small block Oval Track late models.

303

263

271

.675

.625

106

102 102

Valve Lash IN EX

.022 .022

Small Base Circle, great in large cubic inch small block Oval Track late models.

303

263

271

.675

.625

108

104

Great in large cubic inch small block Oval Track late models, Bracket.

305

263

273

.640

.645

106

102

Strong mid & upper end torque & power. Needs 12.5:1 CR-up.

305

263

273

.640

.645

106

102

.022 .022 .022

Small Base Circle, strong mid & upper end torque & HP. Needs 12.5:1 CR-up.

305

263

273

.640

.645

108

104

Great mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

305

263

273

.640

.645

108

104

.022 .022

Small Base Circle, great mid & upper end torque & HP. Needs 12.5:1 CR-up.

305

263

273

.640

.645

110

106

Great mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

305

263

273

.640

.645

110

106

.022 .022

Small Base Circle, great mid & upper end torque & HP. Needs 12.5:1 CR-up.

305

263

273

.640

.645

112

108

.022

.022 .022 .022 .022 .022 .022 .022

.022 .022 .022

Good all around mid-range power. Needs 11.0:1+ CR, 4000+ stall. Good with NOS.

305

263

273

.640

.645

112

108

.022

.022

Small Base Circle, good all around mid-range power. Needs 11.0:1+ CR, 4000+ stall.

307

263

275

.640

.630

106

Strong mid & upper end torque & HP. Needs 12.5:1 CR-up.

307

263

275

.640

.630

106

102 102

.022 .022

Small Base Circle, strong mid & upper end torque & HP. Needs 12.5:1 CR-up.

307

263

275

.640

.630

108

104

Strong mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

307

263

275

.640

.630

108

104

.022 .022

Small Base Circle, strong mid & upper end torque & HP. Needs 12.5:1 CR-up.

307

267

275

.645

.645

106

102

.022

Competition use, good mid & upper HP, medium to high bank Oval Track.

307

267

275

.645

.645

106

102

.022

.022 .022 .022 .022 .022 .022

Small Base Circle, Competition, mid & upper HP, medium to high bank Oval Track.

307

267

275

.645

.645

108

104

.022

Competition use, good mid & upper power, medium to high bank Oval Track.

307

267

275

.645

.645

108

104

.022

.022 .022

Small Base Circle, Competition, mid & upper HP, medium to high bank Oval Track.

307

267

275

.645

.645

110

106

Competition use, good mid & upper power, bracket, OK w/NOS.

307

267

275

.645

.645

110

106

.022 .022

.022 .022

Small Base Circle, Competition use, good mid & upper power, bracket, OK w/NOS.

309

269

277

.650

.650

106

102

.022

.022

Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads, 12.5:1+ CR.

309

269

277

.650

.650

106

102

.022

.022

Small Base Circle, Competition/Bracket E.T. Mid to upper rpm horsepower. 12.5:1+ CR.

309

269

277

.650

.650

108

104

.022

.022

Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR, 4500+ stall.

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260

82

1 2 5

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 83

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

91121 91134

90135 90135

Stud Girdles

NA

90135

91121 91134

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA NA NA NA

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

83

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 84

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111863-06

NA

112183-08S 111863-06S 111863-08

111863-08S 111863-10

111863-10S 110503-08

110503-08S 110503-10

110503-10S 110563-08

110563-08S 110563-10

110563-10S 111083-06

111083-06S 111083-08

111083-08S 111083-10

111083-10S 111083-12

111083-12S 111083-14

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Duration Advertised IN EX

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

305

4600-8400

305

4600-8400

305

4600-8400

305

4600-8400

305

4600-8400

305

4600-8400

305

4600-8400

305

4600-8400

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

307

5000-8800

309

Duration @ .050” IN EX

269

277

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.650

.650

Lobe Separation Intake Angle Centerline

108

104

Valve Lash IN EX

.022

.022

Small Base Circle, Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR

309

269

277

.675

.650

106

102

.022

.022

Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads, 12.5:1+ CR.

309

269

277

.675

.650

106

102

.022

.022

Small Base Circle, Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads.

309

269

277

.675

.650

108

104

Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR.

309

269

277

.675

.650

108

104

.022 .022

.022 .022

Small Base Circle, Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR.

309

269

277

.675

.650

110

106

Competition, Good mid to upper rpm. 12.5:1+ CR. Mild NOS OK.

309

269

277

.675

.650

110

106

.022 .022

.022 .022

Small Base Circle, Competition, Good mid to upper rpm. 12.5:1+ CR. Mild NOS OK.

311

273

279

.645

.640

108

104

.022

Competition, Upper mid to top end power. 12.5:1+ CR, good heads a must.

311

273

279

.645

.640

108

104

.022

.022 .022

Small Base Circle, Competition, Upper mid to top end power. 12.5:1+ CR, good heads.

311

273

279

.645

.640

110

106

Broad power range. Best in larger engine. 12.5:1+ CR a must.

311

273

279

.645

.640

110

106

.022 .022

.022 .022

Small Base Circle, Broad power range. Best in larger engine. 12.5:1+ CR a must.

311

273

279

.680

.640

108

104

.022

Competition, Upper mid to top end power. 12.5:1+ CR, good heads a must.

311

273

279

.680

.640

108

104

.022

.022 .022

Small Base Circle, Competition, Upper mid to top end power. 12.5:1+ CR, good heads.

311

273

279

.680

.640

110

106

.022

Broad power range. Best in larger engine. 12.5:1+ CR, good heads a must.

311

273

279

.680

.640

110

106

.022

.022 .022

Small Base Circle, Broad power range. Best in larger engine. 12.5:1+ CR, good heads.

317

275

285

.630

.630

106

Competition profile, good top end power. Needs good parts.

317

275

285

.630

.630

106

102 102

.022 .022

Small Base Circle, Competition profile, good top end power. Needs good parts.

317

275

285

.630

.630

108

Competition profile, good top end power. Needs good parts.

317

275

285

.630

.630

108

104 104

.022 .022

Small Base Circle, Competition profile, good top end power. Needs good parts.

317

275

285

.630

.630

110

Competition profile, good top end power. Works good w/NOS.

317

275

285

.630

.630

110

106 106

.022 .022

.022 .022 .022 .022

.022 .022

Small Base Circle, Competition profile, good top end power. Works good w/NOS.

317

275

285

.630

.630

112

108

Competition profile, good top end power. Works good w/NOS.

317

275

285

.630

.630

112

108

.022 .022

.022 .022

Small Base Circle, Competition profile, good top end power. Works good w/NOS.

317

275

285

.630

.630

114

110

Competition profile, good top end power. Works good w/NOS.

.022

.022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260

84

1 2 5

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 85

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

91121 91134

90135 90135

Stud Girdles

NA

90135

91121 91134

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA NA NA NA

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

85

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 86

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

111233-06

NA

111083-14S 111233-06S 111233-10

111233-10S 110393-14

110393-14S 111093-06

111093-06S 111093-08 119993

119993-S 119999

119993-RD 119997 118997

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

Duration Advertised IN EX

307

5000-8800

309

5200-8800

309

5200-8800

309

5200-8800

309

5200-8800

309

5200-8800

309

5200-8800

313

5600-9000

313

5600-9000

313

5600-9000

317

Duration @ .050” IN EX

275

285

114013-06S

NA

114013-06

NA

.630

.630

Lobe Separation Intake Angle Centerline

114

317

277

285

.675

.645

106

All out Competition big cylinder head & compression.

110

Valve Lash IN EX

.022

317

277

285

.675

.645

106

102 102

.022 .022

Small Base Circle, all out Competition big cylinder head & compression.

317

277

285

.675

.645

110

Works great in big cubic inch small blocks. OK with NOS.

317

277

285

.675

.645

110

106 106

.022 .022

Small Base Circle, works great in big cubic inch small blocks. OK with NOS.

323

277

291

.675

.675

114

110

.022

Works great in big cubic inch small blocks. Works well with multi-stage NOS.

.022

.022 .022

.022 .022

.022

323

281

291

.675

.645

All out Competition only. Best of everything.

323

281

291

.675

.645

106 106

102 102

Small Base Circle, all out Competition only. Best of everything.

323

281

291

.675

.645

All out Competition only. Best of everything.

108

104

1,2,5 1,2,5 1,2,5

.022

.022

1,2,5

.022

.022

Mechanical Roller Special Order Camshaft.

1,2,5

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, with 50-55mm Bearing

1,2,5

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, with 50-55mm Bearing, LS (C) Firing Order

1,2,5,24

Mechanical Roller Special Order Camshaft.

Duration Advertised IN EX

289

Duration @ .050” IN EX

251

257

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

.640

.640

Lobe Separation Intake Angle Centerline

106

102

Strong mid-range horsepower, rough idle. Oval Track & Bracket cars.

289

251

257

.640

.640

1,2,5 1,2,5

Custom Grind Camshaft, with Rear Drive

• 262-400 1955-1998

1,2,5

1,2,5

Mechanical Roller Special Order Camshaft.

283

1,2,5

1,2,5

Custom Grind Camshaft, with Cast Distributor Gear

3600-7600

1,2,5

.022

Mechanical Roller Special Order Camshaft.

283

1,2,5

.022

Custom Grind Camshaft, Small Base Circle

3600-7600

Cam Notes

323 277 291 .675 .675 114 110 .022 .022 1,2,5 Small Base Circle, Works great in big cubic inch small blocks. Works with multi-stage NOS.

4/7 Swap Steel Billet Mechanical Roller Camshafts (cont.) Cam & Lifter Set Part No.

Valve Lift w/1.50 Rockers IN EX

Small Base Circle, Competition profile, good top end power. Works good w/NOS.

Custom Grind Camshaft

CHEVROLET SMALL BLOCK Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

106

102

Valve Lash IN EX

.022 .022

Small Base Circle, strong mid-range HP, rough idle. Oval Track & Bracket cars.

.022 .022

Cam Notes

1,2,5,22 1,2,5,22

Cam Notes: master note list on page 260

86

1 2 5 24

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-2-6-5-4-3.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 87

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 -------

90135

90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

NA

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

---

--

--

--

--

--

--

--

CHEVROLET SMALL BLOCK

--

--

--

--

--

--

--

--

--

-----

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 -------

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91117 91121

90135

NA

90135

NA

Valve Springs

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 -------

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 -------

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300

94300 94300 94300 94300 94300 94300

• 262-400 1955-1998

4/7 Swap Steel Billet Mechanical Roller Camshaft Components 91117 91121

Stud Girdles

NA

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

NA

90135

Rocker Arms

90101 7 90105 7

NA

90135

Valve Seals

90072 7

NA

90135

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

NA

90135

Steel Titanium Retainers Retainers

NA

NA

90135

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

Rocker Arms

90072 7 90072 7

Stud Girdles

90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010

Fuel Pump Distributor Pushrod Gear

92151 94475 92151 94475

94400 94402 94400 94402

Timing Set

94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

87

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 88

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Steel Billet Mechanical Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

114163-06S

NA

114163-06

114633-06

114633-06S 114173-06

114173-06S 114173-08

114173-08S 114143-06

114143-06S 114143-08

114143-08S 114053-06

114053-06S 114323-08

114323-08S 114713-06

114713-06S 114713-08

114713-08S 114023-06

114023-06S 114913-08

114913-08S

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

Duration Advertised IN EX

287

3800-7800

287

3800-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

289

4000-7800

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

291

4200-8000

295

4000-8000

295

4000-8000

295

4000-8000

295

4000-8000

293

Duration @ .050” IN EX

255

261

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

.600

.620

Lobe Separation Intake Angle Centerline

106

Good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

293

255

261

.600

.620

106

102

102

Valve Lash IN EX

.022

.022

.022

.022

Small Base Circle, good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

295

257

263

.615

.615

106

102

.022

Oval Track/Mild Bracket, mid range torque & top end power. 10.5-11.0:1 CR.

295

257

263

.615

.615

106

102

.022

Small Base Circle, Oval Track/Mild Bracket, mid range torque & top end power.

295

257

263

.640

.640

106

102

Strong mid-range torque & top end power. Needs 10.5-11.5:1 CR.

295

257

263

.640

.640

106

102

.022

.022

.022

.022

.022

.022

Small Base Circle, Strong mid-range torque & top end power. Needs 10.5-11.5:1 CR.

295

257

263

.640

.640

108

104

Strong mid range. Needs good single plane intake, 10.5:1+ CR.

295

257

263

.640

.640

108

104

.022

.022

.022

.022

Small Base Circle, Strong mid range. Needs good single plane intake, 10.5:1+ CR.

299

257

267

.600

.600

106

102

Strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.

299

257

267

.600

.600

106

102

.022

.022

.022

.022

Small Base Circle, strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.

299

257

267

.600

.600

108

104

Mid & upper RPM torque, good in banked Oval Track & Bracket.

299

257

267

.600

.600

108

104

.022

.022

.022

.022

Small Base Circle, mid & upper RPM torque, good in banked Oval Track & Bracket.

295

259

263

.640

.630

Strong Modified or Limited Sprint winner.

295

259

263

.640

.630

106

102

106

Small Base Circle, Strong Modified or Limited Sprint winner.

295

259

263

.640

.640

108

102

104

.022

.022

.022

Oval Track/Drag, mid range torque with top end power. Needs good heads.

295

259

263

.640

.640

108

104

Small Base Circle, Oval Track/Drag, mid range torque & top end power.

299

259

267

.675

.645

360-383ci Sprint, Modified. Super fast tracks.

299

259

267

.675

.645

106

106

102

Small Base Circle, 360-383ci Sprint, Modified. Tacky Track.

299

259

267

.675

.645

108

360-383ci Sprint, Modified. Super fast or Dry Slick Track

299

259

267

.675

.645

108

102

104

104

.022

.022

.022

.022

.022

Small Base Circle, 360-383ci Sprint, Modified. Super fast or Dry Slick Track.

301

263

269

.640

1/4-3/8, Good heads. Dirt Late Model.

301

263

269

.640

.620

.620

106

106

Small Base Circle, 1/4-3/8, Good heads. Dirt Late Model.

303

263

271

.630

.625

108

410 Sprint or big inch Bracket. Strong upper mid-range.

303

263

271

.630

.625

108

102

102

104

104

.022

.022

.022

.022

Small Base Circle, 410 Sprint or big inch Bracket. Strong upper mid-range.

.022

.022

.022

.022

.022

.022

.022

.022

.022

.022

.022

.022

Cam Notes

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

1,2,5,22

Cam Notes: master note list on page 260

88

1 2 5 22

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 89

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91117 91121

90135

NA

91117 91121 91117 91121 91117 91121

90135

90135 90135

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

90072 7

90101 7 90105 7

NA

NA

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

NA NA NA NA NA NA NA NA NA NA NA NA

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134 91121 91134 91121 91134 91121 91134

90135 90135 90135 90135

Stud Girdles

NA

90135

91121 91134

Rocker Arms

90101 7 90105 7

91121 91134

90135

Valve Seals

90072 7

NA

91121 91134

Valve Locks

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA NA NA NA

98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98637 25 97130 10 97220 10 93017 10 93316 25 98543 25 97222 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

89

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 90

CAMSHAFTS

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

114123-06S

NA

114123-06 114123-08

114123-08S 114983-06

114983-06S 114863-06

114863-06S 114863-08

114863-08S 114563-08

114563-08S 114033-06

114033-06S 114083-08

114083-08S 114043-08

114043-08S 114233-06

114233-06S 114073-14S 119994

119994-S

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

NA

NA

Duration Advertised IN EX

299

4400-8200

299

4400-8200

299

4400-8200

299

4400-8200

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

301

4400-8400

305

4600-8400

305

4600-8400

305

4800-8400

305

4800-8400

307

5000-8800

307

5000-8800

309

5200-8600

309

5200-8600

309

5200-8800

309

5200-8800

313

5600-9000

307

Duration @ .050” IN EX

267

275

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.50 Rockers IN EX

.645

.645

Lobe Separation Intake Angle Centerline

106

102

.022

Competition use, good mid & upper HP, medium to high bank Oval Track.

307

267

275

.645

.645

106

102

Valve Lash IN EX

.022

.022 .022

Small Base Circle, Competition, mid & upper HP, medium to high bank Oval Track.

307

267

275

.645

.645

108

104

.022

Competition use, good mid & upper power, medium to high bank Oval Track.

307

267

275

.645

.645

108

104

.022

.022 .022

Small Base Circle, Competition, mid & upper HP, medium to high bank Oval Track.

309

269

277

.650

.650

106

102

.022

.022

Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads, 12.5:1+ CR.

309

269

277

.650

.650

106

102

.022

.022

Small Base Circle, Competition/Bracket E.T. Mid to upper rpm horsepower. 12.5:1+ CR.

309

269

277

.675

.650

106

102

.022

.022

Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads, 12.5:1+ CR.

Cam Notes

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

309 269 277 .675 .650 106 102 .022 .022 1,2,5,22 Small Base Circle, Competition/Bracket E.T. Mid to upper rpm horsepower. Good heads. 309

269

277

.675

.650

108

104

.022

.022

1,2,5,22

311

273

279

.680

.640

108

104

.022

.022

1,2,5,22

Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR.

309 269 277 .675 .650 108 104 .022 .022 1,2,5,22 Small Base Circle, Competition/Bracket E.T. Mid to upper end performance. 12.5:1+ CR.

Competition, Upper mid to top end power. 12.5:1+ CR, good heads a must.

311

273

279

.680

.640

108

104

.022

.022

Small Base Circle, Competition, Upper mid to top end power. 12.5:1+ CR, good heads.

315

273

283

.645

377-400 O.D. 3/8-1/2. Good heads.

315

273

283

.645

.630 .630

106 106

275

285

.630

.630

108

Competition profile, good top end power. Needs good parts.

317

275

285

.630

.630

.022

.022

104

.022

.022

102

Small Base Circle, 377-400 O.D. 3/8-1/2. Good heads.

317

102

108

104

.022 .022

Small Base Circle, Competition profile, good top end power. Needs good parts.

315

277

283

.675

.645

377+, lighter car. Fast track, Drag w/auto.

315

277

283

.675

.645

108 108

104

Small Base Circle, 377+, lighter car. Fast track, Drag w/auto.

317

277

285

.675

.645

106

All out Competition big cylinder head & compression.

317

277

285

.675

.645

106

104 102 102

.022 .022 .022 .022

Small Base Circle, all out Competition big cylinder head & compression.

.022 .022 .022 .022 .022 .022

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

327 281 295 .730 .715 114 110 .022 .022 1,2,5,22 Small Base Circle, all out Competition only. Needs good valvetrain. Works good w/NOS.

Custom Grind Camshaft

4/7 Swap Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, Small Base Circle

4/7 Swap Mechanical Roller Special Order Camshaft.

1,2,5,22 1,2,5,22

Cam Notes: master note list on page 260

90

1 2 5 22

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 91

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET SMALL BLOCK

• 262-400 1955-1998

4/7 Swap Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91121 91134

90135

NA

91121 91134

90135

NA

91121 91134

91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134 91121 91134

90135

90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135 90135

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90072 7

90101 7 90105 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

--

Stud Girdles

NA

90135

--

Rocker Arms

90101 7 90105 7

91121 91134

--

Valve Seals

90072 7

NA

--

Valve Locks

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

90135 90135

Steel Titanium Retainers Retainers

NA

91121 91134 91121 91134

Valve Springs

NA --

--

98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10 98543 25 97130 10 97222 10 93017 10 93311 25 98843 25 97220 10

-97222 10 93017 10 93316 25 98738-A 25 98825 25 97130 10 97220 10 --

--

--

--

--

--

--

--

--

--

90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 90072 7 --

--

90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 90101 7 90105 7 --

--

Pushrods

95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 95010 --

--

Fuel Pump Distributor Pushrod Gear

Timing Set

92151 94475

94400 94402

94300

92151 94475

94400 94402

94300

92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475 92151 94475

92151 94475

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94400 94402

94400 94402

94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300 94300

94300

94300

Components Notes: master note list on page 260

7 Requires 7/16” rocker studs. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

91

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 92

CAMSHAFTS

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

American Muscle™ Hydraulic Roller Camshafts Cam Part No.

199265-16 197245-12 197715-10 197715-13

Cam & Lifter Set Part No.

CL199265-16 CL197245-12 CL197715-10 CL197715-13

CHEVROLET GEN III / IV

Duration Advertised IN EX

263

1700-6700

267

1700-6700

274

2000-7400

274

1900-7300

269

198035-09 198075-09 198135-09

Cam & Lifter Set Part No.

CL198035-09 CL198075-09 CL198135-09

CHEVROLET GEN III / IV

190235-14 192105-15 190285-15 190385-15 190915-16 193865-15 190305-15

Cam & Lifter Set Part No.

CL190235-14 CL192105-15

CL190285-15 CL190385-15 CL190915-16 CL193865-15 CL190305-15

207

276

219

228

285

282

2500-6600

290

2400-6800

226

236

285

226

236

282

Duration @ .050” IN EX

264

1600-6400

274

1800-6800

274

1800-7000

284

2600-7200

274

1800-7000

290

2800-7400

115

Hyd. Hyd.

12

Hyd. Hyd.

.525

.525

112

108

.525

.525

110

106

Hyd. Hyd.

.525

.525

113

109

Hyd. Hyd.

226

234

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.525

.525

Lobe Separation Intake Angle Centerline

109

103

Valve Lash IN EX

Hyd. Hyd.

12 12 12

Cam Notes

290 234 242 .625 .625 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

297 242 250 .625 .625 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

269

116

Cam Notes

Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

• LS-SERIES 3-BOLT 1997-PRESENT

1200-6200

.477

Valve Lash IN EX

Same as #197715-10 w/wider separation for easier tunability & smoother power band.

Duration Advertised IN EX

275

.466

Lobe Separation Intake Angle Centerline

Our version of the GM ASA cam. Advanced lobe design for increased performance.

• LS-SERIES 3-BOLT 1997-PRESENT

2200-6500

Valve Lift w/1.70 Rockers IN EX

Our version of the GM Hot cam. Advanced lobe design for increased performance.

BOOST™ Hydraulic Flat Tappet Camshafts Cam Part No.

196

Firing Order: 1•8•7•2•6•5•4•3

Our version of the GM #12561721. Advanced lobe design for increased performance.

Rattler Cams™ Hydraulic Roller Camshafts Cam Part No.

Duration @ .050” IN EX

278

Duration @ .050” IN EX

216

224

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.551

.551

Lobe Separation Intake Angle Centerline

114

Blower, Aggressive Street/Strip, upper torque & horsepower.

277

218

230

.525

.525

115

110 111

Blower, Best in Street Rod with 5.3 to 5.7L (10+ psi). Great mid range.

274

224

224

.612

.612

115

Turbo, Street/Strip performance, Good mid range power.

286

224

234

.612

.638

115

111 111

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

12

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Blower Aggressive Street/Strip, ideal for supercharged or NOS applications.

280

236

232

.625

.625

116

114

Hyd. Hyd.

Turbo, Street/Strip Turbo’d (remote) applications. Strong mid & upper rpm performance.

286

236

244

.625

.625

115

111

Hyd. Hyd.

Blower, Aggressive Street/Strip, ideal for supercharged or NOS applications.

290

242

242

.625

.625

115

111

Hyd. Hyd.

Turbo, Competition, large cubic inch. Needs aftermarket heads & intake, plus higher CR.

1

1,12 1,12 1,12 1,12 1,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

92

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 93

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

American Muscle™ Hydraulic Roller Camshaft Components Lifters

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91166 33

NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98113-K1 98116-K1

98113 98116

98113-K1 98116-K1 98113-K1 98116-K1 98113-K1 98116-K1

98113 98116 98113 98116 98113 98116

CHEVROLET GEN III / IV

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162 97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33

NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98112-K1 98116-K1

98112 98116

98113-K1 98116-K1 98112-K1 98116-K1

98113 98116 98112 98116

CHEVROLET GEN III / IV

Steel Titanium Retainers Retainers

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91156 33 911133 91156 33 911133 91156 33 911133 91156 33

NA NA NA NA NA NA

Valve Springs

98112-K1 98116-K1

98112 98116

98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1

Rocker Arms

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98113 98116

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116 98112 98116 98112 98116

97161 97162

97161 97162 97161 97162 97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series 3-Bolt ‘97-’05.

Phone: 1300 350 351

Valve Seals

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

Components Notes: master note list on page 260 3 10 25 26

Pushrods

NA

95018

NA NA NA

95018 95018 95018

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA

NA NA

94308 26 94307 27 94308 26 94307 27

Stud Girdles

Pushrods

NA

95018

NA NA

95018 95018

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

• LS-SERIES 3-BOLT 1997-PRESENT

Valve Spring, Retainer & Lock Kit

98113-K1 98116-K1

Valve Locks

97161 97162

BOOST™ Hydraulic Flat Tappet Camshafts Lifters

Stud Girdles

• LS-SERIES 3-BOLT 1997-PRESENT

Rattler Cams™ Hydraulic Roller Camshaft Components Lifters

Rocker Arms

Fax: 1300 350 454

27 30 31 33

Stud Girdles

Pushrods

NA

95018

NA NA NA NA NA NA

95018 95018 95018 95018 95018 95018

Fuel Pump Distributor Pushrod Gear

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA NA NA NA

NA NA NA NA NA

LS-Series 3-Bolt ‘06-present. LS-Series Gen III. LS-Series Gen IV. Tie bar style lifters.

Web: www.fabre.com.au

Timing Set

Email: info@fabre.com.au

94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27

93


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 94

CAMSHAFTS

CHEVROLET GEN III / IV LS-SERIES 3-BOLT ‘97-PRESENT 5.7L 6.0L 5.7L 4.8L 5.3L

LS1 LS2 LS6 LM4 LM7

4.8L 6.0L 6.0L 5.3L 5.3L

LR4 LQ4 LQ9 L33 L59

1997-2004 2005-2009 2001-2005 2003-2004 1999-2007

1999-2007 1999-2007 2002-2007 2005-2007 2002-2007

• LS-SERIES 3-BOLT 1997-PRESENT

WITH

CATHEDRAL PORT HEADS

‘97-’04 Corvette, ‘98-’02 Camaro/Trans Am, ‘04 Pontiac GTO ‘05-’07 Buick Rainer, ‘05-’06 Pontiac GTO, ‘06-’07 Cadillac CTS-V, ‘05-’07 Corvette, ‘05-’09 SSR, ‘06-’09 Trailblazer SS ‘01-’04 Corvette Z06, ‘04-’05 Cadillac CTS-V ‘03-’04 Trailblazer EXT, ‘04 Envoy XL, ‘03-’04 SSR, ‘04 Buick Rainer ‘99-’06 Tahoe/Yukon, ‘99-’06 Suburban/Yukon XL, ‘99-’07 Silverado/Sierra, ‘02-’05 Escalade 2WD ‘02-’06 Avalanche, ‘03-’07 Express, ‘03-’07 Savana ‘99-’06 Tahoe/Yukon, ‘99-’07 Silverado/Sierra, ‘03-’07 Express 2500-3500, ‘03-’07 Savana 2500-3500 ‘99-’01 Silverado/Sierra 2500-3500, ‘99-’01 Express, ‘99-’01 Savana, ‘99-’01 Suburban/Yukon XL, ‘03-’07 Hummer H2 ‘02-’06 Escalade, ‘02-’06 Escalade EXT & ESV, ‘03-’07 Silverado SS, ‘04-’05 Silverado/Sierra HO, ‘06-’07 Silverado/Sierra MAX Option ‘05-’07 Silverado/Sierra 4WD ‘02-’07 Silverado/Sierra, ‘02-’06 Tahoe/Yukon, ‘02-’06 Suburban/Yukon XL

Note: If using Rectangular Port heads (OE or aftermarket) on any of above engines, please use cams from LS-Series with Rectangular Port Heads.

Hydraulic Roller Camshafts (w/Cathedral Port Heads) Cam Part No.

194545-14 195815-14 192705-14 190315-14 192005-12 190235-14 190275-17 190255-13 190395-13 190295-12 190225-13 190245-12 190285-13 190285-15 190375-12 190375-15 190385-10 190385-12

Cam & Lifter Set Part No.

CL194545-14 CL195815-14 CL192705-14 CL190315-14 CL192005-12 CL190235-14 CL190275-17 CL190255-13 CL190395-13 CL190295-12 CL190225-13 CL190245-12

CL190285-13 CL190285-15 CL190375-12 CL190375-15 CL190385-10 CL190385-12

Cam Notes: master note list on page 260

Duration Advertised IN EX

250

800-5000

259

1000-5800

255

1000-5600

260

1000-5800

261

1400-6000

269

1200-6200

272

1400-6400

270

1500-6500

270

1600-6600

270

1600-6600

272

1800-6500

272

1800-6600

274

1800-6800

274

1800-6800

274

1800-6800

274

1800-6800

274

1800-7000

274

1800-7000

256

204

210

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.525

.525

Lobe Separation Intake Angle Centerline

114

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

12

Hyd. Hyd.

1

110

Hyd. Hyd.

110

Hyd. Hyd.

Good increase over stock in mid to upper end. May need programmer for best results.

265

207

213

.556

.566

114

110

Big torque in 4.8L, 5.3L or 5.7L Hi Lift Version 192705-14

261

208

214

.525

.525

114

Big torque in 4.8L, 5.3L or 5.7L. Needs good intake and exhaust.

264

210

214

.595

.598

114

110

High lift short duration design, Great throttle response.

267

214

220

.525

.525

112

108

Hyd. Hyd.

113

Hyd. Hyd.

12

Great for Street Rod transplant with 5-3-5.7L. Good all around performance.

278

216

224

.551

.551

114

110

Aggressive Street/Strip, upper torque & horsepower.

278

216

224

.553

.553

117

Hyd. Hyd.

Street/Strip, Great mid to upper end power. 9.5:1+ CR. Best with minor tune.

270

218

218

.604

.604

274

218

224

.604

.612

Great mid range performance with top end power.

275

218

224

.604

.604

222

222

.561

.561

Hyd. Hyd.

1,12

112

108

Hyd. Hyd.

1,12

113

109

113

109

Hyd. Hyd. Hyd. Hyd.

Street/Strip power. Great mid range with top end performance. OK with turbocharger.

281

222

225

.561

.578

112

108

Street/Strip applications, mid-range torque & horsepower.

274

224

224

.612

.612

274

224

224

.612

.612

280

224

230

.609

.604

Hyd. Hyd.

113

109

Hyd. Hyd.

112

108

Hyd. Hyd.

Street/Strip performance, Good mid range power. Needs good heads. Street/Strip performance, Good mid range power.

115

111

Hyd. Hyd.

Broad power range. Best with Cathedral Port heads & aftermarket intake.

280

224

230

.609

.604

115

111

Hyd. Hyd.

Broad power range. Best with Cathedral Port heads & aftermarket intake.

286

224

234

.612

.638

110

Aggressive Street/Strip, Good mid range horsepower.

286

224

234

.612

.638

112

106

Aggressive Street/Strip, also great with small blower or NOS.

94

Fax: 1300 350 454

1

109

Mid range to top end power & torque. Nice throttle response.

272

1

113

Good drivability with great mid range power. Also good in turbocharged applications.

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

Phone: 1300 350 351

Duration @ .050” IN EX

108

Hyd. Hyd. Hyd. Hyd.

1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 95

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshaft (w/Cathedral Port Heads) Components Lifters

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98113-K1 98116-K1

98113 98116

98113-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98113-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98113-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1

98113 98116 98113 98116 98112 98116 98113 98116 98113 98116 98112 98116 98113 98116 98112 98116 98112 98116 98113 98116 98113 98116

Steel Titanium Retainers Retainers

Rocker Arms

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

98112 98116 98112 98116 98112 98116 98112 98116

97161 97162 97161 97162 97161 97162 97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series 3-Bolt ‘97-’05.

Phone: 1300 350 351

Valve Seals

97161 97162

Components Notes: master note list on page 260 3 10 25 26

Valve Locks

Fax: 1300 350 454

27 30 31 33

Stud Girdles

Pushrods

NA

95018

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018

Fuel Pump Distributor Pushrod Gear

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

LS-Series 3-Bolt ‘06-present. LS-Series Gen III. LS-Series Gen IV. Tie bar style lifters.

Web: www.fabre.com.au

Timing Set

Email: info@fabre.com.au

94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27

95


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 96

CAMSHAFTS

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshafts (w/Cathedral Port Heads) (cont.) Cam Part No.

190735-13 190325-12 190325-15 196765-10 196765-12 190965-13 190335-13 196025-12 196915-10 196915-12 196915-14 190355-12 190365-15 190265-10 190265-13 190265-15 190405-13 190305-15 199995

Cam & Lifter Set Part No.

CL190735-13 CL190325-12 CL190325-15 CL196765-10 CL196765-12 CL190965-13 CL190335-13 CL196025-12 CL196915-10 CL196915-12 CL196915-14 CL190355-12 CL190365-15 CL190265-10 CL190265-13 C190265-15

CL190405-13 CL190305-15 NA

Duration Advertised IN EX

274

1900-7100

281

2000-7200

281

2000-7200

275

2400-7000

275

2400-7000

278

2400-7200

278

2000-7000

283

2200-7000

283

2200-7000

283

2300-7100

283

2300-7100

280

2200-7200

282

2400-7200

287

2600-7200

287

2600-7200

287

2600-7200

288

2800-7200

290

2800-7400

274

Duration @ .050” IN EX

226

226

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.525

.525

Lobe Separation Intake Angle Centerline

113

109

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,12

Hyd. Hyd.

1,12

Hyd. Hyd.

Street/Strip, Good mid & upper range torque & performance. OK with turbocharger.

284

226

232

.578

.587

112

108

Aggressive Street/Strip, upper torque & horsepower. Needs good heads.

284

226

232

.578

.587

115

Aggressive Street/Strip, upper torque & horsepower.

282

228

234

.604

.609

Hot Street applications. Engine Swap w/Carb.

282

228

234

.604

.609

110 112

111

106 108

Hot Street applications. Needs aftermarket heads & intake, higher CR.

280

230

232

.625

.625

113

109

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Competition, Great mid range torque and power. Good heads, 2500+ stall.

294

230

246

.625

.625

113

109

Hyd. Hyd.

Hot Street/Strip. Great mid range performance. Best with aftermarket heads.

284

232

234

.598

.598

112

108

Hyd. Hyd.

Street/Strip performance, Good throttle responce. Best with aftermarket heads.

287

232

236

.598

.604

110

106

Street/Strip performance, Good mid range power. Needs good heads.

287

232

236

.598

.604

112

108

Street/Strip performance, Good mid range power. Needs good heads.

287

232

236

.598

.604

114

110

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Street/Strip performance, Good mid range power. Needs good heads. Turbo

284

232

236

.625

.625

112

108

Hyd. Hyd.

Fair idle, Excellent mid range performance. 2500+ stall, 10.5:1 CR, 3.70-4.20 gear.

278

234

230

.625

.625

115

111

Hyd. Hyd.

Street/Strip performance, Good mid range power. Needs good heads. Great with turbo.

290

236

242

.612

.612

110

106

Hyd. Hyd.

Hot Street/Strip. Great mid range torque. 2800+ stall, 11.0:1+ CR, better heads/intake.

290

236

242

.612

.612

113

109

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads & intake, higher CR.

290

236

242

.612

.612

115

111

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads & intake, higher CR.

295

240

248

.625

.625

113

109

Hyd. Hyd.

Broad top end power. Needs aftermarket heads & intake, plus higher CR. Good w/turbo.

290

242

242

.625

.625

115

111

Hyd. Hyd.

Competition, large cubic inch. Needs aftermarket heads & intake, plus higher CR.

Custom Grind Camshaft

Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

12

1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

96

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 97

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshaft (w/Cathedral Port Heads) Components Lifters

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 91113 91166 33

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98113-K1 98116-K1

98113 98116

98113-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 --

98113 98116 98113 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 --

Steel Titanium Retainers Retainers

Rocker Arms

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 --

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 --

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series 3-Bolt ‘97-’05.

Phone: 1300 350 351

Valve Seals

97161 97162

Components Notes: master note list on page 260 3 10 25 26

Valve Locks

Fax: 1300 350 454

--

--

27 30 31 33

--

Stud Girdles

Pushrods

NA

95018

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 --

Fuel Pump Distributor Pushrod Gear

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

LS-Series 3-Bolt ‘06-present. LS-Series Gen III. LS-Series Gen IV. Tie bar style lifters.

Web: www.fabre.com.au

Timing Set

Email: info@fabre.com.au

94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27

97


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 98

CAMSHAFTS

CHEVROLET GEN III / IV LS-SERIES 3-BOLT ‘97-PRESENT 7.0L 6.2L

LS7 LS9

2006-Present 2009

• LS-SERIES 3-BOLT 1997-PRESENT

WITH

RECTANGULAR PORT HEADS

‘06-Present Corvette Z06 ‘09 Corvette ZR1

Hydraulic Roller Camshafts (w/Rectangular Port Heads) Cam Part No.

190385-12 190735-13 190325-12 190325-15 192865-13 196765-12 190345-13 196915-10 196915-12 196915-14 190365-15 190915-16 190905-12 190805-12 190805-15 190865-13 190305-15 199995

Cam & Lifter Set Part No.

CL190385-12 CL190735-13 CL190325-12 CL190325-15 CL192865-13 CL196765-12 CL190345-13 CL196915-10 CL196915-12 CL196915-14 CL190365-15 CL190915-16 CL190905-12 CL190805-12 CL190805-15 CL190865-13 CL190305-15 NA

Duration Advertised IN EX

274

1800-7000

274

1900-7100

281

2000-7200

281

2000-7200

275

2200-6800

275

2600-7200

278

2200-7200

283

2400-7200

283

2400-7200

283

2400-7200

282

2400-7000

284

2400-7200

287

2400-7400

284

2600-7200

284

2600-7200

288

2600-7200

290

2800-7400

286

Duration @ .050” IN EX

224

234

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.612

.638

Lobe Separation Intake Angle Centerline

112

Aggressive Street/Strip, also great with small blower or NOS.

274

226

226

.525

.525

113

108 109

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

12

Hyd. Hyd.

Street/Strip, Good mid & mid range torque & performance. Ok with turbocharger.

284

226

232

.578

.587

112

108

Aggressive Street/Strip, mid torque & horsepower. Needs good heads.

284

226

232

.578

.587

115

Aggressive Street/Strip, upper torque & horsepower.

291

227

243

.607

.618

113

111

109

Street/Strip, broad power & torque range. Good heads a plus.

282

228

234

.604

.609

112

108

Hyd. Hyd.

1,12

Hyd. Hyd.

1,12

Hyd. Hyd.

Hyd. Hyd.

Street/Strip performance. Needs aftermarket heads & intake, higher CR.

297

230

250

.625

.625

113

109

Hot Street/Strip with blower or large NOS system. Big mid range power.

287

232

236

.598

.604

110

106

Hyd. Hyd. Hyd. Hyd.

Hot Street/Strip performance, Good mid range power. Needs good heads & gears.

287

232

236

.598

.604

112

108

Hyd. Hyd.

Hot Street/Strip performance, Good mid range power. Needs good heads & gears.

287

232

236

.598

.604

Hot Street/Strip performance, Better idle than 12

114

110

1,12

Hyd. Hyd.

1,12 1,12 1,12 1,12 1,12 1,12

278 234 230 .625 .625 115 111 Hyd. Hyd. 1,12 Street/Strip performance, Good mid range power. Needs good heads. Turbo applications OK. 280

236

232

.625

.625

116

Hot Street/Strip performance, Aggressive Turbo Power

290

236

238

.612

.604

112

114

108

Hyd. Hyd.

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket intake, 2500+ stall.

297

236

250

.625

.625

112

108

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads & intake, higher CR.

297

236

250

.625

.625

115

111

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads. Great with NOS.

304

240

256

.625

.625

113

109

Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads & intake, higher CR.

1,12 1,12 1,12 1,12 1,12

290 242 242 .625 .625 115 111 Hyd. Hyd. 1,12 Competition, large cubic inch. Needs aftermarket heads & intake, plus higher CR. Turbo OK.

Custom Grind Camshaft

Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

1,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

98

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 99

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshaft (w/Rectangular Port Heads) Components Lifters

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 91113 91166 33

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98113-K1 98116-K1

98113 98116

98112-K1 98116-K1 98113-K1 98116-K1 98113-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 --

98112 98116 98113 98116 98113 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 --

Steel Titanium Retainers Retainers

Rocker Arms

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 --

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 --

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series 3-Bolt ‘97-’05.

Phone: 1300 350 351

Valve Seals

97161 97162

Components Notes: master note list on page 260 3 10 25 26

Valve Locks

Fax: 1300 350 454

--

--

27 30 31 33

--

Stud Girdles

Pushrods

NA

95018

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 95018 --

Fuel Pump Distributor Pushrod Gear

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

LS-Series 3-Bolt ‘06-present. LS-Series Gen III. LS-Series Gen IV. Tie bar style lifters.

Web: www.fabre.com.au

Timing Set

Email: info@fabre.com.au

94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27

99


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 100

CAMSHAFTS

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshafts For Carbureted Applications Cam Part No.

190315-08 190395-10 190375-10 190325-10 192435-10 193865-10 190405-10 192965-10 199995

Cam & Lifter Set Part No.

CL190315-08 CL190395-10 CL190375-10 CL190325-10 CL192435-10 CL193865-10 CL190405-10 CL192965-10 NA

CHEVROLET GEN III / IV

Duration Advertised IN EX

260

1000-5800

270

1600-6600

274

1800-6800

281

2000-7200

280

2200-7200

284

2600-7200

288

2700-7200

292

2600-7200

199993

Cam & Lifter Set Part No.

NA

210

214

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.595

.598

Lobe Separation Intake Angle Centerline

274

218

224

.604

.612

Great mid range performance with top end power.

280

224

230

.609

.604

226

232

.578

.587

Cam Notes

Hyd. Hyd.

1,12

Hyd. Hyd.

1,12

104

Hyd. Hyd.

110

106

Hyd. Hyd.

110

Broad power range. Best with Cathedral Port heads.

284

Valve Lash IN EX

108

High lift short duration design, Great throttle response.

110

106 106

Aggressive Street/Strip, upper torque & horsepower. Needs good heads.

290

230

238

.604

.604

110

106

Street/Strip performance, Good mid range power. Needs good heads.

292

236

244

.625

.625

110

106

Large cubic inch. Needs aftermarket heads & intake, higher CR.

295

240

248

.625

.625

110

106

Hot Street/Strip Rod. Good Heads & Intake Higher Compression Ratio

300

244

252

.651

.625

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Large cubic inch, Race only applications. Needs aftermarket heads & intake, higher CR.

Custom Grind Camshaft

Hydraulic Roller Special Order Camshaft.

• LS-SERIES 3-BOLT 1997-PRESENT

Mechanical Roller Camshafts Cam Part No.

264

Duration @ .050” IN EX

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Hyd. Hyd.

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

Mechanical Roller Special Order Camshaft.

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

1,12 1,12 1,12 1,12 1,12 1,12

Cam Notes

1,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

100

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 101

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshaft Components Lifters

Rev Kit

911133 91166 33

NA

911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 911133 91166 33 91113 91166 33

NA NA NA NA NA NA NA

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98112-K1 98116-K1

98112 98116

98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 --

98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 --

CHEVROLET GEN III / IV

Steel Titanium Retainers Retainers

Lifters

91177 91179

Rev Kit

NA

--

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162

-93001 93385 25 90097 30 97212 10 93092 10 90095 31

97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 --

-93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 -93001 93385 25 90097 30 97212 10 93092 10 90095 31 --

--

Steel Titanium Retainers Retainers

--

Components Notes: master note list on page 260 3 10 25 26

--

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series 3-Bolt ‘97-’05.

Phone: 1300 350 351

Rocker Arms

Stud Girdles

Pushrods

NA

95018

NA NA NA NA NA NA NA

--

--

NA

Valve Seals

Rocker Arms

Stud Girdles

95018 95018 95018 95018 95018 95018 95018 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94308 26 94307 27

NA

NA

94308 26 94307 27

NA NA NA NA NA NA

NA

NA NA NA NA NA NA

NA

94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27 94308 26 94307 27

• LS-SERIES 3-BOLT 1997-PRESENT

Valve Springs

--

Valve Seals

97161 97162

Mechanical Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Locks

Fax: 1300 350 454

Valve Locks

--

--

27 30 31 33

--

NA

Pushrods

--

Fuel Pump Distributor Pushrod Gear

NA

NA

LS-Series 3-Bolt ‘06-present. LS-Series Gen III. LS-Series Gen IV. Tie bar style lifters.

Web: www.fabre.com.au

Email: info@fabre.com.au

Timing Set

94308 26 94307 27

101


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 102

CAMSHAFTS

CHEVROLET GEN IV

• LS-SERIES SINGLE-BOLT 2005-PRESENT

Hydraulic Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

190976-12

NA

190226-13 190536-16 190496-12 197096-12 190916-16 190806-12 190866-13 190926-13 199996

NA

272

1800-6500

272

1800-6800

NA

275

2000-6800

NA

279

2200-7000

NA

278

2000-7000

NA

284

2600-7200

NA

284

2400-7200

NA

288

2600-7200

NA

292

2800-7400

NA

CHEVROLET GEN IV

Duration Advertised IN EX

199996

222

222

NA

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

.561

.561

Lobe Separation Intake Angle Centerline

113

284

222

232

.561

.587

112

Street/Strip applications, mid-range torque & horsepower.

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,12

109

Hyd. Hyd.

274

228

224

.625

.612

116

112

Hyd. Hyd.

108

Street, Street/Strip Turbo’d (remote) applications. Strong mid range torque. 2000+ stall.

289

228

238

.588

.604

112

108

Street/Mild Race, Broad torque range. Great mid range performance.

290

230

242

.625

.625

112

108

Street/Strip performance, Good mid range power. Needs good heads.

280

236

232

.625

.625

116

114

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Street/Strip Turbo’d (remote) applications. Strong mid & upper rpm performance.

297

236

250

.625

.625

112

108

Hyd. Hyd.

Aggressive Street/Competition, Good mid to upper end horsepower. 2500+ stall.

304

240

256

.625

.625

113

109

Hyd. Hyd.

Competition, Great top end power. 2800+ stall, aftermarket intake & better heads.

307

244

260

.625

.625

113

109

Competition, large cubic inch. Great high rpm power. 3000+ stall.

Hyd. Hyd.

Hydraulic Roller Special Order Camshaft.

• LS-SERIES SINGLE-BOLT 2005-PRESENT

Cam & Lifter Set Part No.

VVT

Street/Strip power. Great mid range with top end performance. OK with turbocharger.

Custom Grind Camshaft

Mechanical Roller Camshafts Cam Part No.

272

Duration @ .050” IN EX

WITHOUT

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

WITHOUT

1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12 1,12

VVT

Firing Order: 1•8•7•2•6•5•4•3

Valve Lift w/1.70 Rockers IN EX

Mechanical Roller Special Order Camshaft.

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

1,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning.

102

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 103

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET GEN III / IV

• LS-SERIES 3-BOLT 1997-PRESENT

Hydraulic Roller Camshaft Components Lifters

Rev Kit

91113 91166 33

NA

91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33 91113 91166 33

NA NA NA NA NA NA NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98112-K1 98116-K1

98112 98116

98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 98112-K1 98116-K1 --

CHEVROLET GEN III

98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 98112 98116 --

Steel Titanium Retainers Retainers

Lifters

91177 91179

Rev Kit

NA

--

-93001 93385 25 97212 10 93092 10

97161 97162

-93001 93385 25 97212 10 93092 10

97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 97161 97162 --

-93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 -93001 93385 25 97212 10 93092 10 --

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

10° Valve lock Angle, must use matching retainers/locks. Machining Required. LS-Series Single-Bolt 05-present, LS2/LSR/LR4. LS-Series Single-Bolt 07-10 LS3 6.0L, 08-10 6.2L.

Phone: 1300 350 351

--

Rocker Arms

Stud Girdles

Pushrods

90095

NA

95018

90095

NA

90095

NA

90095

NA

90095

NA

90095

NA

90095

NA

90095

NA

90095

NA

--

NA

Rocker Arms

Stud Girdles

95018 95018 95018 95018 95018 95018 95018 95018 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94304 28 94306 29

NA

NA

94304 28 94306 29

NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA

NA

94304 28 94306 29 94304 28 94306 29 94304 28 94306 29 94304 28 94306 29 94304 28 94306 29 94304 28 94306 29 94304 28 94306 29 94304 28 94306 29

• LS-SERIES 3-BOLT 1997-PRESENT

Components Notes: master note list on page 260 10 25 28 29

Valve Seals

97161 97162

Mechanical Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Locks

Fax: 1300 350 454

Valve Locks

--

Valve Seals

--

--

NA

Pushrods

--

Fuel Pump Distributor Pushrod Gear

NA

NA

Timing Set

94304 28 94306 29

33 Tie bar style lifters.

103

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 104

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC120021-12

MC120021-12DL 4

MC122501-12 MC120931-12 MC120031-12 MC122521-15 MC120941-11

MC122501-12DL 4 MC120931-12DL 4 MC120031-12DL 4 MC122521-15DL 4 MC120941-11DL 4

Duration Advertised IN EX

259

800-4000

259

800-4000

267

1500-5000

269

1600-5200

275

1800-5400

279

1800-5400

CHEVROLET BIG BLOCK MARK IV

263

Duration @ .050” IN EX

205

209

127641-14 127061-13

Cam & Lifter Set Part No.

CL127641-14 CL127061-13

286 346

1200-4600

CHEVROLET BIG BLOCK MARK IV

269

205

215

120021-12 120031-12 122121-12 122441-12

Cam & Lifter Set Part No.

CL120021-12

267

213

CL120031-12 CL122121-12 CL122441-12

269

1200-5200

279

1600-6000

289

2400-6600

.476

.516

112

213

.510

.510

112

279

215

225

.516

.527

112

Great low & mid-range torque. OK in heavy vehicle.

289

221

235

.504

.504

115

Fair idle. Excellent in Performance & Marine applications.

279

225

225

.527

.527

111

Fair idle. Strong mid-range. Needs 4 barrel & headers.

• 396-502 1965-1996

286

Duration @ .050” IN EX

196

196

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

108

Hyd. Hyd.

108

Hyd. Hyd.

108 108 111

107

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.412

.412

Lobe Separation Intake Angle Centerline

114

110

348

210

213

.473

.473

113

109

Near duplicate of the Chev L78 425HP/427 cam (GM #3883986).

• 396-502 1965-1996

269

Duration @ .050” IN EX

205

215

.476

.516

Lobe Separation Intake Angle Centerline

112

108

215

225

.516

.527

112

108

1 1 1

Hyd. Hyd.

1

Hyd. Hyd.

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

279

1

Cam Notes

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

1

Valve Lash IN EX

Smooth idle, near duplicate of the Chev LS1 335HP/427 cam (GM #3874872).

Duration Advertised IN EX

259

800-4000

112

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

.476

Exceptional low end torque. Good in PUs, 4x4s & RVs.

Duration Advertised IN EX

1000-4500

.476

Lobe Separation Intake Angle Centerline

Great low end torque replacement cam, good fuel economy.

American Muscle™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift a/1.70 Rockers IN EX

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

289

225

235

.527

.533

112

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

295

235

241

.553

.533

112

108

Hyd. Hyd. Hyd. Hyd.

Street Force™ 4, Lopey idle, good mid-range power. Needs 2800+ stall.

1 1 1

Cam Notes: master note list on page 260 1 4

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

104

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 105

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

91111 3 91116 4

NA

91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4 91111 3 91116 4

NA NA NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31

98529 98636 98529 98636 98529 98636 98529 98636 98529 98636

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

CHEVROLET BIG BLOCK MARK IV

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075

Pushrods

Rev Kit

91111 3 91116

NA

91111 3 91116

NA

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120 90120 90120

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529 98636

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10

CHEVROLET BIG BLOCK MARK IV

Rocker Arms

Stud Girdles

90075

90120

90075

Rev Kit

91111 3 91116

NA

91111 3 91116

91111 3 91116 91111 3 91116

NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31

98529 98636 98529 98636 98529 98636

94402 94402 94402

94205 94305 94205 94305 94205 94305 94205 94305

90120

Pushrods

Fuel Pump Distributor Pushrod Gear

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402

Timing Set

94205 94305 94205 94305

• 396-502 1965-1996

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

94402

• 396-502 1965-1996

Valve Spring, Retainer & Lock Kit

98529-K31 98636-K31

Timing Set

90120

American Muscle™ Hydraulic Flat Tappet Camshaft Components Lifters

Fuel Pump Distributor Pushrod Gear

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402

94205 94305 94205 94305

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

105

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 106

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

128001-09 128041-09 128101-09

Cam & Lifter Set Part No.

CL128001-09 CL128041-09 CL128101-09

Duration Advertised IN EX

281

1800-5600

289

2000-5900

297

2400-6200

CHEVROLET BIG BLOCK MARK IV

Duration @ .050” IN EX

129141-14 129261-14 129421-14

Cam & Lifter Set Part No.

CL129141-14 CL129261-14 CL129421-14

279 289

2200-5900

303

2500-6400

CHEVROLET BIG BLOCK MARK IV

Hydraulic Flat Tappet Camshafts Cam Part No.

122501-12 122511-11

120931-12 120991-10 120951-10 120951-12

Cam & Lifter Set Part No.

CL122501-12 CL122511-11

CL120931-12 CL120991-10 CL120951-10 CL120951-12

263

800-4200

267

1200-5000

275

1400-5600

275

1500-5800

275

1500-5800

Valve Lash IN EX

Cam Notes

305 243 251 .545 .561 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

• 396-502 1965-1996

289

Duration @ .050” IN EX

225

235

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.555

.553

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Blower, Fair idle. High Performance Street, stock converter ok, best with 1800+ and gears.

299

235

245

.553

.553

114

110

Blower, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

313

243

251

.595

.595

114

110

Hyd. Hyd.

Blower, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+

• 396-502 1965-1996

Duration Advertised IN EX

259

800-4000

Lobe Separation Intake Angle Centerline

297 235 243 .553 .545 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

Duration Advertised IN EX

1800-5600

Valve Lift w/1.70 Rockers IN EX

289 227 235 .545 .553 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

263

Duration @ .050” IN EX

205

209

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.476

.476

Lobe Separation Intake Angle Centerline

112

Great low end torque replacement cam, good fuel economy.

263

209

209

.476

.476

111

Low end performer, smooth idle. Good fuel efficiency.

267

213

213

.510

.510

112

Good idle, Street, Off-Road, Towing. Good fuel efficiency.

275

221

221

.533

.533

110

285

221

231

.533

.533

110

285

221

231

.533

.533

112

1

Valve Lash IN EX

Cam Notes

107

Hyd. Hyd.

1

106

Hyd. Hyd.

108

108

Good low & mid-range horsepower. Needs 4 barrel & headers. Street & Strip. Needs 4 barrel, headers & lower gears.

1

106 108

Hot Street, Improved carburetion, exhaust & lower gears needed.

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

106

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 107

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91111 3 91116

NA

91111 3 91116

91111 3 91116

NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31

98529 98636 98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

91112 3

NA

91112 3

91112 3

NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31

98529 98636 98529 98636

Valve Locks

97110 -93015 93321 25 97128 10 97216 10 93018 10

Rev Kit

91111 3 91116

NA

91111 3 91116

91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116

NA NA NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31

98529 98636 98529 98636 98529 98636 98529 98636 98529 98636

Stud Girdles

90075

90120

90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

95222 92150 95110/95115 94475

94402

94205 94305

Rocker Arms

Stud Girdles

90075

90120

90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

95222 92150 95110/95115 94475

94402

94205 94305

• 396-502 1965-1996

Hydraulic Flat Tappet Camshaft Components Lifters

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10

CHEVROLET BIG BLOCK MARK IV

Rocker Arms

• 396-502 1965-1996

BOOST™ Hydraulic Flat Tappet Camshafts Rev Kit

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10

CHEVROLET BIG BLOCK MARK IV Lifters

Valve Locks

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120 90120 90120

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402 94402 94402

94205 94305 94205 94305 94205 94305 94205 94305

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

107

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 108

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

120951-14 122521-15 120941-11

120241-09 122121-10 122121-14 120051-10 120961-11

120761-10 122441-08 122441-10 121181-08 121181-10 121181-12

121721-08 121721-10 121721-12 122531-10 120061-10 120741-10 120741-12 121271-10 121271-12 121861-10

Cam & Lifter Set Part No.

CL120951-14 CL122521-15 CL120941-11

CL120241-09 CL122121-10 CL122121-14 CL120051-10 CL120961-11

CL120761-10 CL122441-08 CL122441-10 CL121181-08 CL121181-10 CL121181-12

CL121721-08 CL121721-10 CL121721-12 CL122531-10

CL120061-10 CL120741-10 CL120741-12 CL121271-10 CL121271-12 CL121861-10

Duration Advertised IN EX

275

1500-5800

275

1600-5600

279

1500-5800

279

1600-5800

279

1600-6000

279

1600-6000

285

2000-6400

285

2000-6400

285

2000-6500

289

2400-6400

289

2400-6500

291

2400-6500

291

2400-6600

291

2400-6800

294

2500-6500

294

2500-6600

294

2500-6800

297

2800-6800

299

2800-6900

299

2800-6800

299

2800-7000

303

3000-7000

303

3000-7200

305

3200-7400

285

Duration @ .050” IN EX

221

231

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.533

.533

Lobe Separation Intake Angle Centerline

114

289

221

235

.504

.504

115

279

225

225

.527

.527

111

285

225

231

.527

.533

Hyd. Hyd.

1

Hyd. Hyd.

107

Hyd. Hyd.

111

Fair idle. Strong mid-range. Needs 4 barrel & headers.

Cam Notes

110

Hot Street, Improved carburetion, exhaust & lower gears needed. Fair idle. Excellent in Performance & Marine applications.

Valve Lash IN EX

109

105

Hyd. Hyd.

114

110

Hyd. Hyd.

Fair idle, Nice mid range torque. 4bbl., headers & 2500+ stall suggested.

289

225

235

.527

.533

Hot Marine, Performance MerCruisers. Fair idle.

289

225

235

.527

.533

Hot Marine, Performance MerCruisers. Fair idle.

285

231

231

.510

.510

Noticeable idle, great with oval port heads.

285

231

231

.533

.533

110

106

110 111

289

231

235

.544

.553

106

Hyd. Hyd.

106

Hyd. Hyd.

107

Street/Strip, lots of torque. Auto OK with 3.55+ gears.

110

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

295

235

241

.553

.533

108

Lopey idle. Moderate Performance & Bracket Racing.

295

235

241

.553

.533

110

291

237

237

.553

.553

108

Hyd. Hyd.

104

Hyd. Hyd.

Lopey idle, Street/Bracket, Strong mid to upper end performance.

291

237

237

.553

.553

110

Hyd. Hyd.

104

106

Lopey idle. Moderate Performance & Bracket Racing.

Hyd. Hyd.

106

Hyd. Hyd. Hyd. Hyd.

Mild rough idle, Hot Street, good mid range. 9.5:1+ CR, 2800+ stall & headers.

291

237

237

.553

.553

112

108

Hyd. Hyd.

Good idle, Street/Strip. Broad mid range to upper end performance. 9.5:1+ CR.

301

241

247

.570

.578

108

104

Hyd. Hyd.

Rough idle, Hot Street/Strip, big mid range torque. 11.0:1 CR, 3000+ stall.

301

241

247

.570

.578

110

106

Hyd. Hyd.

Rough idle, Street/Strip, strong mid range power. 9.5:1+ CR, 2800+ stall.

301

241

247

.570

.578

112

108

Hyd. Hyd.

Good idle, Street/Strip. Broad mid range to upper end performance. 9.5:1+ CR.

307

243

253

.575

.595

110

Super mid-range & top end horsepower. Minimum 11.0:1 CR.

299

245

245

.578

.578

110

105 106

Hyd. Hyd.

Hyd. Hyd.

Hot Street & Bracket Racing. Big torque. 10.0:+ CR, 3000+ stall, lower gears.

303

245

249

.578

.578

110

106

Hyd. Hyd.

Rough idle, Hot Street/Strip. Strong mid range torque. 10.0:1+ CR, 3000+ stall.

303

245

249

.578

.578

112

108

Hyd. Hyd.

Fair idle, Hot Street/Strip. Big mid range torque. 10.0:1+ CR, 3000+ stall.

309

249

255

.595

.595

110

106

Hyd. Hyd.

Rough idle, Pro Street/Bracket, strong mid to top end. 10.5:1+ CR, 3200+ stall.

309

249

255

.595

.595

112

108

Hyd. Hyd.

Fair idle, Pro Street/Bracket. Strong mid range with good upper end power.

313

251

259

.612

.595

110

106

Hyd. Hyd.

Rough idle, Very aggressive Street/Bracket. Strong upper mid range. 11.0:1+ CR.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

108

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 109

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91111 3 91116

NA

91111 3 91116

91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91116 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112 91111 3 91112

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

98529-K31 98636-K31

98529 98636

97110 -93015 93321 25 97128 10 97216 10 93018 10

98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98529-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31 98636-K31

98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98529 98636 98636 98636 98636 98636

98636 98636 98636 98636 98636 98636

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

109

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 110

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Hydraulic Flat Tappet Camshafts (cont.) Cam Part No.

121861-12 129991 129997

Cam & Lifter Set Part No.

CL121861-12 NA NA

Duration Advertised IN EX

305

3200-7400

313

Duration @ .050” IN EX

251

259

128025-09 128045-09 128085-09

CL128025-09 CL128045-09 CL128085-09

129165-14 129275-16 129225-14 129425-14 129485-14

CL129165-14

CL129275-16 CL129225-14 CL129425-14 CL129485-14

112

108

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

4/7 Swap Hydraulic Flat Tappet Special Order Camshaft.

• 396-502 1965-1996

Duration Advertised IN EX

280

1800-5600

288

2000-5900

296

2400-6200

Duration @ .050” IN EX

273 287

2400-6200

287

2400-6200

307

2400-6200

322

2400-6200

Valve Lift w/1.70 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1,22

Cam Notes

296 235 243 .600 .600 109 103 Hyd. Hyd. 1,2 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall. 304 243 251 .600 .583 109 103 Hyd. Hyd. 1,2 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

• 396-502 1965-1996

Duration Advertised IN EX

1800-5600

Firing Order: 1•8•4•3•6•5•7•2

1

288 227 235 .555 .555 109 103 Hyd. Hyd. 1,2 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam & Lifter Set Part No.

.595

Custom Grind Camshaft

CHEVROLET BIG BLOCK MARK IV Cam Part No.

.612

Lobe Separation Intake Angle Centerline

Hydraulic Flat Tappet Special Order Camshaft.

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.70 Rockers IN EX

Performance/Bracket for 500+. 10.5-12.0:1 CR. Also good with large roots blower.

Custom Grind Camshaft

CHEVROLET BIG BLOCK MARK IV Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

273

Duration @ .050” IN EX

221

221

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.578

.578

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

Turbo, Good idle. High Performance Street, stock converter ok, best with 1800+ and gears.

285

235

233

.617

.612

116

112

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.646

.635

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.680

.680

114

110

Hyd. Hyd.

Blower, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

329

267

277

.680

.680

114

110

Hyd. Hyd.

Blower, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

1,2 1,2 1,2 1,2

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 2 Requires Thrust Button. 22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

110

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 111

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91111 91112

NA

--

91111 3 91112 91111 91112

NA

98636-K31

NA

--

Valve Springs

--

98636

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

--

--

--

--

97110 -93015 93321 25 97128 10 97216 10 93018 10 --

--

--

--

CHEVROLET BIG BLOCK MARK IV

--

--

--

90075

90120

--

Pushrods

95222 92150 95110/95115 94475 --

--

--

Lifters

Rev Kit

91167 3 91161

NA

91167 3 91161

91167 3 91161

Valve Springs

Rocker Arms

Stud Girdles

Pushrods

NA

98636-K32 10 98636

NA

98636-K32 10 98636

98636-K32 10 98636

90075

90120

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

CHEVROLET BIG BLOCK MARK IV

90075 90075

Lifters

Rev Kit

91167 3 91161

NA

91167 3 91161 911613

91161 3 91161 3

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA NA

98636-K32 10 98636 98652-K32 10 98636 98652-K12 10 98652-K32 10 98636 98652-K12 10

92150 94475

94402

94402

94205 94305

94205 94305

94205 94305

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120

95220 92150 95108/95121 94475

94402

94205 94305

95220 92150 95108/95121 94475

94402

94205 94305

• 396-502 1965-1996

BOOST™ Retro-Fit Hydraulic Roller Camshafts Components Valve Spring, Retainer & Lock Kit

92150 94475

94402

Timing Set

• 396-502 1965-1996

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 9722010 93018 10 9372025 93017 97128 10 9722010 93018 10 9372025 93017

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120 90120

95220 92150 95108/95121 94475 95220 95220

92150 92150

94402 94402 94402

94205 94305 94205 94205

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

111

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 112

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV Cam Part No.

120225-12 120235-10 120235-12 123515-10 120245-10 120245-12 122115-12 122115-14

123315-08 123315-10 120325-08 120325-10 120325-12 120255-08 120255-12 121905-08 121905-11

120605-12 120605-14 120205-12 120205-14 120405-08 120405-10 120405-12

Cam & Lifter Set Part No.

CL120225-12 CL120235-10 CL120235-12 CL123515-10 CL120245-10 CL120245-12 CL122115-12 CL122115-14

CL123315-08 CL123315-10 CL120325-08 CL120325-10 CL120325-12 CL120255-08 CL120255-12 CL121905-08 CL121905-11

CL120605-12

CL120605-14 CL120205-12 CL120205-14 CL120405-08 CL120405-10 CL120405-12

• 396-502 1965-1996

Duration Advertised IN EX

262

1200-4400

266

1200-5000

266

1400-4600

272

1600-5000

278

1800-5400

278

1800-5400

278

1800-5600

278

1800-5600

280

2000-5600

280

2000-5600

282

2000-5700

282

2000-5800

282

2000-5800

284

2400-6000

284

2400-6000

286

2500-6100

286

2500-6200

286

2500-6200

286

2500-6500

286

2500-6300

286

2500-6300

288

2600-6400

288

2600-6400

288

2600-6400

266

Duration @ .050” IN EX

209

213

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.510

.527

Lobe Separation Intake Angle Centerline

112

Great daily usage, smooth idle, great fuel economy.

274

213

221

.510

.538

110

108 106

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

274

213

221

.510

.538

112

108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

280

219

227

.555

.555

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Good idle, Performance Street, great low to mid range. Headers suggested.

284

225

231

.567

.578

110

106

Hyd. Hyd.

Noticeable idle, Street Performance. Should have 2000+ stall, 9.5:1+ CR.

284

225

231

.567

.578

112

Fair idle, Street & mild Performance usage. Crisp throttle.

288

225

235

.595

.601

112

108 108

Hyd. Hyd. Hyd. Hyd.

Mild idle, Street Performance, Great mid range torque. Headers suggested

288

225

235

.595

.601

114

110

Hyd. Hyd.

Fair idle, excellent mid range power. 2500+ stall. Also good w/roots blower, 10psi max.

280

227

227

.555

.555

108

104

Hyd. Hyd.

Mild rough idle, Hot Street. Should have good exhaust, 2500+ stall & 9.5:1 CR.

280

227

227

.555

.555

110

106

Hyd. Hyd.

Mild rough idle, Hot Street. Should have good exhaust, 2500+ stall & 9.5:1 CR.

288

229

235

.589

.601

108

104

Street/Strip, 10.0:1+ CR, aftermarket dual plane intake recommended.

288

229

235

.589

.601

110

106

Fair idle, Performance usage. Mid-range torque & horsepower.

288

229

235

.589

.601

112

108

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Fair idle, Moderate Street/Mild Bracket. Good mid range. 10.0-11.5:1, 2500+ stall.

288

231

235

.578

.618

108

104

Fair idle, Performance usage. Great mid-range torque & power.

288

231

235

.578

.618

112

108

Fair idle, Performance usage. Great mid-range torque & power.

286

233

233

.601

.601

108

104

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Rough idle, Performance Street/Mild Strip. Nice mid range. 9.5:1+ CR, 2500+ stall.

286

233

233

.601

.601

111

107

Hyd. Hyd.

Rough idle, Hot Street. Good usable mid range power band. 9.5:1+ CR, 2500+ stall.

300

233

247

.601

.612

112

108

Hyd. Hyd.

Mild idle, Hot Street. Great mid range performance. 9.5:1+ CR, 2500+ stall.

300

233

247

.601

.612

114

110

Hyd. Hyd.

Mild idle, Hot Street. Great mid range performance. Small blower or NOS OK.

298

233

245

.635

.635

112

108

Hyd. Hyd.

Fair idle, Aggressive Street. Big mid range torque. 9.5:1+ CR, 2500+ stall.

298

233

245

.635

.635

114

110

Hyd. Hyd.

Fair idle, Aggressive Street. Big mid range torque. Good with 150+ NOS or blower.

294

235

241

.618

.618

108

104

Hyd. Hyd.

Rough idle, Hot Street/Strip. Great mid range. Needs good heads, 10.0:1+ CR.

294

235

241

.618

.618

110

106

Hyd. Hyd.

Fair idle, Street/Strip, best in 496-540ci. Nice mid range power. 2600+ stall.

294

235

241

.618

.618

Rough idle, strong mid-range torque & horsepower.

112

108

Hyd. Hyd.

1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

Cam Notes: master note list on page 260 1 2

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

112

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 113

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91167 3 91161

NA

91167 3 91161

91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3

91167 3 91167 3 91161 91167 3 91161 91167 3 91161

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305

94205 94305 94205 94305 94205 94305

94205 94305 94205 94305 94205 94305

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

113

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 114

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Retro-Fit Hydraulic Roller Camshafts (cont.) Cam Part No.

120265-10 120265-12 120265-14 120275-10 120665-10 120665-12 121615-12 121615-14 123505-10 123505-12 120145-10 120345-08 120345-10 120345-12 120345-14 120335-10 120335-12 120355-10 120285-12 123335-10 123335-12 122455-10 122455-12 122455-14

Cam & Lifter Set Part No.

CL120265-10 CL120265-12 CL120265-14 CL120275-10 CL120665-10 CL120665-12 CL121615-12 CL121615-14 CL123505-10 CL123505-12 CL120145-10 CL120345-08 CL120345-10 CL120345-12 CL120345-14 CL120335-10 CL120335-12 CL120355-10

CL120285-12 CL123335-10 CL123335-12 CL122455-10 CL122455-12 CL122455-14

Duration Advertised IN EX

290

2600-6500

290

2600-6500

290

2600-6500

294

2800-6500

296

2900-6500

296

3000-6500

296

3000-6600

296

3000-6600

300

3200-6600

300

3000-6600

302

3400-6700

302

3400-6800

302

3400-6800

302

3400-6800

302

3400-6800

304

3500-6800

304

3500-6800

304

3500-6800

306

3600-6900

306

3600-6900

306

3600-6900

306

3600-6900

306

3600-6900

306

3600-6900

296

Duration @ .050” IN EX

237

243

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.635

.640

Lobe Separation Intake Angle Centerline

110

296

237

243

.635

.640

112

296

237

243

.635

.640

114

Lopey idle, Hot Street & Bracket Racing. 10.0:1+ CR advised.

294

241

241

.618

.618

110

243

249

.640

.640

110

Hyd. Hyd.

1,2

Hyd. Hyd.

110

Hyd. Hyd.

108 106

Rough idle, Bracket Race with excellent mid & upper end horsepower.

302

Cam Notes

106

Decent idle, Performance Street. Needs 10.0:1+ CR, 2800+ stall. Lopey idle, Hot Street & Bracket Racing. 10.0:1+ CR advised.

Valve Lash IN EX

106

Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, great upper mid range power. 10.0:1+ CR, 3000+ stall.

302

243

249

.640

.640

112

Lopey idle, broad mid range power. 10.0:1 CR, 3000+ stall.

308

243

255

.640

.640

112

108 108

Lopey idle, Excellent mid to top end power. 10.0:1+ CR, 3200+ stall.

308

243

255

.640

.640

114

110

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle. Good mid range with top end power. Good with blower or NOS.

308

247

255

.680

.680

110

106

Hyd. Hyd.

Rough lopey idle, Pro Street/Bracket. 3500+ stall, 10.5:1+ CR, good intake & exhaust.

308

247

255

.680

.680

112

108

Hyd. Hyd.

Rough idle, Pro Street/Strip. Best in larger cubic inch, broad power. 10.5:1+ CR.

302

249

249

.640

.640

110

106

Hyd. Hyd.

Rough idle, Hot Street/Bracket. Needs 10.5:1 CR, 3500+ stall, headers, good intake.

308

249

255

.640

.640

108

Lopey idle, Pro Street/Bracket. 10.5:1+ CR advised.

308

249

255

.640

.640

110

Lopey idle, Pro Street/Bracket. 10.5:1+ CR advised. .

308

249

255

.640

.640

112

104

Hyd. Hyd.

108

Hyd. Hyd.

106

Fair idle, Pro Street/Bracket. 10.5:1+ CR advised. OK with NOS.

308

249

255

.640

.640

114

110

Lopey idle, Pro-Street/Bracket. 10.5:1+ CR advised. OK with NOS.

308

251

255

.612

.612

110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Lopey idle, Pro Street/Bracket. Single plane intake, 10.5:1+ CR advised.

308

251

255

.612

.612

112

108

Hyd. Hyd.

Lopey idle, broad power band. Single plane intake, 10.5:1+ CR advised.

310

251

257

.629

.629

110

106

Hyd. Hyd.

Lopey idle, Hot Street/Bracket. Single plane intake, 10.5:1+ CR advised.

308

253

255

.640

.640

112

108

Hyd. Hyd.

Lopey idle, Hot Street/Bracket. Single plane intake, 10.5:1+ CR advised. OK with NOS.

312

253

259

.657

.640

110

106

Hyd. Hyd.

Lopey idle, Hot Street/Bracket in larger cubic inch. 11.0+ CR, good heads.

312

253

259

.657

.640

112

108

Hyd. Hyd.

Lopey idle, Best in large cubic inch. 11.0+ CR, good heads, 3500+ stall. NOS OK.

312

253

259

.680

.680

110

106

Hyd. Hyd.

Strip/Bracket. 540+ cubic inch with good heads. Great upper mid range.

312

253

259

.680

.680

112

108

Hyd. Hyd.

Strip/Bracket. 540+ cubic inch with good heads. Great upper mid range.

312

253

259

.680

.680

114

110

Hyd. Hyd.

HP/Bracket, best for 540+. Good upper rpm torque. 11.5:1 CR, 3500+ stall.

1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2

Cam Notes: master note list on page 260 1 2

Stock (O.E.) valve springs cannot be used. Requires Thrust Button.

114

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 115

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91167 3 91161

NA

91167 3 91161

91167 3 91161 91167 3 91161 91167 3 91167 3 91167 3 91167 3 91167 3 91167 3 91167 3 91167 3 91161

91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91167 3 91161 91161 3 91161 3 91161 3 91161 3 91161 3 91161 3 91161 3

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120

95220 92150 95108/95121 94475

94402

94205 94305

90120 90120 90120 90120 90120 90120 90120 90120

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

90120

95220 92150 95108/95121 94475

90120

95220 92150 95108/95121 94475

90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 95220 92150 95108/95121 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94205 94305 94205 94305

94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305

94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

115

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 116

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Retro-Fit Hydraulic Roller Camshafts (cont.) Cam Part No.

128525-12 128525-14 129995 129999 124995 124998

Cam & Lifter Set Part No.

CL128525-12 CL128525-14 NA NA NA NA

Duration Advertised IN EX

312

3800-7000

312

3800-7000

322

Duration @ .050” IN EX

259

269

127192-14 127522-12

CL127192-14 CL127192-14DL 4 CL127522-12 CL127522-12DL 4

121052-10 121742-08 122312-10 122142-12

CL121052-10 CL121052-10DL 4 CL121742-08 CL121742-08DL 4 CL122312-10 CL122312-10DL 4 CL122142-12 CL122142-12DL 4

112

108

322

259

269

.680

.680

114

110

Retro-Fit Hydraulic Roller Special Order Camshaft.

Custom Grind Camshaft, 4/7 Swap

Custom Grind Camshaft, LS (C) Firing Order

• 396-502 1965-1996

Duration Advertised IN EX

342

2800-6800

283 283

2600-6500

285

2800-6600

285

3000-6800

1,2

316

Duration @ .050” IN EX

242

242

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.539

.539

Lobe Separation Intake Angle Centerline

114

108

Valve Lash IN EX

.022

Smooth idle, near duplicate of the Chev LS6 465HP/454 cam (GM #3904362).

333

264

270

.579

.600

112

108

Near duplicate of the Chev L88 430HP/427 cam (GM #3928911).

• 396-502 1965-1996

Duration Advertised IN EX

2500-6400

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Retro-Fit Hydraulic Roller Special Order Camshaft.

336

Cam Notes

Hyd. Hyd.

Retro-Fit Hydraulic Roller Special Order Camshaft.

1800-6500

Valve Lash IN EX

Hyd. Hyd.

Retro-Fit Hydraulic Roller Special Order Camshaft.

Mechanical Flat Tappet Camshafts Cam & Lifter Set Part No.

.680

Custom Grind Camshaft, with Cast Distributor Gear

CHEVROLET BIG BLOCK MARK IV Cam Part No.

.680

Lobe Separation Intake Angle Centerline

HP/Bracket, best for 540+. Good upper rpm torque. 11.5:1 CR, 3500+ stall.

American Muscle™ Mechanical Flat Tappet Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.70 Rockers IN EX

HP/Bracket, best for 540+. Good upper rpm torque. 11.5:1 CR, 3500+ stall.

Custom Grind Camshaft

CHEVROLET BIG BLOCK MARK IV Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

283

Duration @ .050” IN EX

248

248

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.578

.578

Lobe Separation Intake Angle Centerline

110

Rough idle, Street/Strip, best with 10.0+ CR, 3000+ stall.

289

248

254

.022

.578

.623

108

106 104

.025

.022

1,2 1,2 1,2 1,2

Cam Notes

.026

Valve Lash IN EX

.022

1,2

.022

1

Cam Notes

.022

Lopey idle, Street High Performance/Strip. Best with 3200 stall, 10.5:1 CR & 800+ cfm..

291

250

256

.595

.606

110

106

Increased mid-range torque & horsepower. Can be used with NOS.

295

250

260

.595

.629

112

Fair idle, excellent Bracket cam. Increased CR required.

108

.022 .022

.022 .022

1 1 1 1

Cam Notes: master note list on page 260 1 2 4

116

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 117

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91161 3

NA

91161 3 -----

NA --

Valve Spring, Retainer & Lock Kit

Valve Springs

98636-K32 10 98636 98636-K32 10 98636

--

--

--

--

--

--

---

Steel Titanium Retainers Retainers

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

--

--

Valve Locks

--

--

--

--

--

--

--

--

--

--

--

--

CHEVROLET BIG BLOCK MARK IV

--

--

--

---

Rocker Arms

Stud Girdles

90075

90120

90075 -----

90120 -----

Pushrods

95220 92150 95108/95121 94475 95220 92150 95108/95121 94475 --

--

--

--

---

Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4

NA

Valve Springs

98636-K31 98636 98636-K32 10 98636-K31 98636 98636-K32 10

Steel Titanium Retainers Retainers

Valve Locks

97110 -93015 93321 25 97128 10 97216 10 93018 10

Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4

91115 3 91118 4 91115 3 91118 4

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA

98636-K32 10 98636 98636-K32 10 98636

--

94402

94205 94305

94402

94205 94305

94402

94402 94402 94402

94205 94305 94205 94305 94205 94305 94205 94305

Rocker Arms

Stud Girdles

90075

90120

90075

90120

Pushrods

Fuel Pump Distributor Pushrod Gear

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402

Timing Set

94205 94305 94205 94305

• 396-502 1965-1996

Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10

CHEVROLET BIG BLOCK MARK IV

--

Timing Set

• 396-502 1965-1996

American Muscle™ Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475

94402 94402

94205 94305 94205 94305

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

117

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 118

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

Mechanical Flat Tappet Camshafts Cam Part No.

120902-08 120902-10 120902-12 121932-08 121932-10 122322-08 122132-08 122132-12 122152-12 122332-08 120802-10 129992

Cam & Lifter Set Part No.

CL120902-08 CL120902-08DL 4 CL120902-10 CL120902-10DL 4 CL120902-12 CL120902-12DL 4 CL121932-08 CL121932-08DL 4 CL121932-10 CL121932-10DL 4 CL122322-08 CL122322-08DL 4 CL122132-08 CL122132-08DL 4 CL122132-12 CL122132-12DL 4 CL122152-12 CL122152-12DL 4 CL122332-08 CL122332-08DL 4 CL120802-10 CL120802-10DL 4 NA

• 396-502 1965-1996

Duration Advertised IN EX

287

3000-6800

287

3000-6800

287

3000-7000

289

3200-7000

289

3200-7000

295

3600-7200

299

3500-7000

299

3600-7200

303

4000-7400

303

4000-7600

309

4400-7800

295

Duration @ .050” IN EX

252

124902-08 124902-10 124902-12 124322-08 124332-08 129997

Cam & Lifter Set Part No.

CL124902-08 CL124902-08DL 4 CL124902-10 CL124902-10DL 4 CL124902-12 CL124902-12DL 4 CL124322-08 CL124322-08DL 4 CL124332-08 CL124332-08DL 4 NA

295

287 287

3000-6800

287

3000-6800

295

3200-7000

303

3800-7600

.640

108

104

Valve Lash IN EX

.022

252

260

.618

.640

110

106

.022

295

252

260

.618

.640

112

108

.022

.022

Cam Notes

1

.022

1

.022

1

Fair idle, good mid range power. 11.5-12.5:1 CR, 3000+ stall. Roots blower 8.0:1 max.

295

254

260

.623

.629

108

104

.022

Rough idle, Bracket/Oval Track, great high torque, good mid range power.

295

254

260

.623

.629

110

106

.022

Fair idle, Bracket E.T. Nice mid range torque & power. 11.5:1+ CR, 3400+ stall.

303

260

268

.629

.623

108

305

264

270

.561

.580

108

Rough idle, Drag Race. Higher CR, stall speed & lower gears.

305

264

270

.561

.580

112

.022

108

.022

.022

104

268

276

.650

.670

112

108

.022

.022

Competition use, great mid & upper RPM horsepower. 12.5-1-up needed.

313

268

278

.623

.650

108

104

Moderate competition, excellent mid & upper RPM power. 12.0-1 CR.

317

274

282

.680

.680

110

106

.022

.022

Drag or Modified. Best in big cubic inch. Aggressive upper rpm. 12.5:1+ CR.

1

.022

.022

Increased mid-range torque & horsepower. Can be used with NOS.

311

.022

104

Rough idle, good mid-range torque & power. Needs good heads & intake.

1 1

.022

1 1

.022

1

.022

1

.022

1 1

Mechanical Flat Tappet Special Order Camshaft.

• 396-502 1965-1996

Duration Advertised IN EX

3000-6800

.618

Lobe Separation Intake Angle Centerline

Rough idle, good mid to upper range performance. 3000+ stall, 11.5:1+ CR.

4/7 Swap Mechanical Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.70 Rockers IN EX

Rough idle, Hot Street/Bracket/Short Track Oval, high torque grind. 3000+ stall.

Custom Grind Camshaft

CHEVROLET BIG BLOCK MARK IV

260

Firing Order: 1•8•4•3•6•5•7•2

295

Duration @ .050” IN EX

252

260

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.70 Rockers IN EX

.618

.640

Lobe Separation Intake Angle Centerline

108

104

Valve Lash IN EX

.022

Rough idle, good mid to upper range performance. 3000+ stall, 11.5:1+ CR.

295

252

260

.618

.640

110

106

.022

Rough idle, good mid to upper range performance. 3000+ stall, 11.5:1+ CR.

295

252

260

.618

.640

112

108

.022

Lopey idle, good mid to upper range performance. 3000+ stall, 11.5:1+ CR.

303

260

268

.629

.623

108

104

.022

Rough idle, good mid-range torque & power. Needs good heads & intake.

313

268

278

.623

.650

108

104

Moderate competition, excellent mid & upper RPM power. 12.0-1 CR.

Custom Grind Camshaft

4/7 Swap Mechanical Flat Tappet Special Order Camshaft.

.022

.022

.022 .022

.022 .022

Cam Notes

1,22 1,22 1,22 1,22 1,22 1,22

Cam Notes: master note list on page 260 1 4

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

118

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 119

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 91118

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA NA NA NA NA NA NA NA --

98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 --

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 --

CHEVROLET BIG BLOCK MARK IV

--

--

--

Lifters

Rev Kit

91115 3 91118 4

NA

91115 3 91118 4

91115 3 91118 4 91115 3 91118 4 91115 3 91118 4 91115 91118

Valve Springs

NA

98636-K32 10 98636

NA

98636-K32 10 98636

NA NA --

98636-K32 10 98636 98636-K32 10 98636 98636-K32 10 98636 --

--

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120 90120 90120 90120 90120 90120 90120 90120 --

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 --

92150 94475

94402 94402 94402 94402 94402 94402 94402 94402 94402

94402

94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305 94205 94305

94205 94305

• 396-502 1965-1996

4/7 Swap Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Rocker Arms

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 --

--

--

--

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120

95222 92150 95110/95115 94475

94402

94205 94305

90120 90120 --

95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 95222 92150 95110/95115 94475 --

92150 94475

94402 94402 94402

94402

94205 94305 94205 94305 94205 94305

94205 94305

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

119

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 120

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Big Bottle Cams™- Nitrous Oxide Mechanical Roller Cams Firing Order: 1•8•4•3•6•5•7•2 Cam Part No.

Cam & Lifter Set Part No.

120453-12

NA

121663-12 120823-12 120973-12 121043-12 121043-14 121093-14 129993

NA NA NA NA NA NA

NA

Duration Advertised IN EX

297

4000-7000

299

4000-7000

307

4300-7200

309

4500-7500

309

4600-7800

309

4600-8000

315

4800-8500

309

Duration @ .050” IN EX

265

Cam & Lifter Set Part No.

124823-12

NA

124453-12 124043-12 124043-14 124073-15 124803-16 124793-12 124093-18 129994

NA

311

NA NA NA NA NA NA

NA

299 307

4300-7200

309

4600-7800

309

4600-8000

313

4600-8800

317

5400-8600

319

5000-8200

323

4800-8500

317

120

267

275

323

277

279

.714

.725

112

108

.022

.022

.022

.022

285

.714

.714

112

108

291

.737

.731

112

108

.022 .022

.022 .022

323

277

291

.810

.810

112

108

.022

.022

13.0:1+ compression. Good Heads, 5000+ stall. Good with large manifold systems.

323

277

291

.810

.810

114

110

13.0:1+ compression. Good Heads, 5000+ stall. Multi stage systems.

327

283

295

.765

.725

Very large cubic inch with big multi-stage nitrous.

114

110

.022 .022

.022 .022

Mechanical Roller Special Order Camshaft.

• 396-502 1965-1996

311

Duration @ .050” IN EX

267

279

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.70 Rockers IN EX

.714

.725

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

.022

317

275

285

.714

.714

112

323

277

291

.810

.810

112

Quick 16. Needs good heads. Multi-stage systems.

323

277

291

.810

.810

114

110

.022

.022

13.0:1+ compression. Good Heads, 5000+ stall. Multi stage systems.

331

281

299

.873

.810

115

111

Large cubic inch w/multi-stage nitrous. Needs good heads & CR.

343

285

311

.850

.810

116

500+ cubic inch, high compression. Multi stage systems.

331

287

299

.765

.731

112

112

108

.022

.022

.022

.022

.022

.022

Competition only, strong upper range for 540+. Good with large manifold systems.

351

291

319

.873

.867

Very large cubic inch with big multi-stage nitrous.

Custom Grind Camshaft

118

114

.022

.022

4/7 Swap Mechanical Roller Special Order Camshaft.

Fax: 1300 350 454

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes

1,2,5,22

.022

.022

1,2,5

.022

.022

108

1,2,5

1,2,5,22

108

Good upper mid to top end for 500+. Use with large manifold systems.

Cam Notes

.022

Rough idle, aggressive upper rpm performance. 250+ plate systems, 11.0:1+ CR.

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

108

Rough idle, great upper mid to top end performer. Needs good heads, 250+ systems.

Cam Notes: master note list on page 260 1 2 4 5

112

Good upper mid to top end for 500+. Use with large manifold systems.

Duration Advertised IN EX

4000-7000

.703

Valve Lash IN EX

Rough idle, aggressive upper rpm performance. 250+ plate systems, 11.0:1+ CR.

Big Bottle Cams™ - 4/7 Swap Mechanical Roller Cams Cam Part No.

.703

Lobe Separation Intake Angle Centerline

Rough idle. Good upper rpm horsepower. Auto w/4000 stall. 11.0:1+.

Custom Grind Camshaft

CHEVROLET BIG BLOCK MARK IV

277

Valve Lift w/1.70 Rockers IN EX

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

22 Ignition firing order must be changed to 1-8-7-3-6-5-4-2. Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 121

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Big Bottle Cams™ - Nitrous Oxide Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 --

NA

NA

NA

NA

NA

NA

NA

Valve Locks

Valve Seals

98844 25 97130 10 97222 10 93018 10 93321 25

98824 25

NA

97222 10 93018 10 93321 25

98824 25

NA

97222 10 93018 10 93321 25

NA

98824 25

NA

--

Steel Titanium Retainers Retainers

98844 25 97130 10 97222 10 93018 10 93321 25

NA

NA

Valve Springs

--

--

--

CHEVROLET BIG BLOCK MARK IV

97222 10 93018 10 93321 25 --

--

--

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 --

Pushrods

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 --

--

Lifters

Rev Kit

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135 91158 91135

91158 91135 91158 91135 91158 91135 --

NA

NA NA

NA NA NA --

NA

NA NA

NA NA NA --

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98844 25 97130 10 97222 10 93018 10 93321 25

98844 25 97130 10 97222 10 93018 10 93321 25 98824 25

NA

97222 10 93018 10 93321 25

98824 25

NA

97222 10 93018 10 93321 25

98824 25 98824 25 --

NA NA --

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94305 94305 94305 94305 94305

94305

• 396-502 1965-1996

Valve Spring, Retainer & Lock Kit

91158 91135

Timing Set

90120 95110/95115 92151 94475

Big Bottle Cams™ - 4/7 Swap Mechanical Roller Camshaft Components Valve Springs

Fuel Pump Distributor Pushrod Gear

97222 10 93018 10 93321 25 97222 10 93018 10 93321 25 --

--

--

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 --

--

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94400 94402

94305 94305 94305 94305 94305 94305

94305

Components Notes: master note list on page 260

10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

121

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:16 AM Page 122

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

121213-10

NA

121213-08 121203-08 121203-10 120183-08 120183-10 120183-12 120173-08 120173-10 120173-12 121313-10 121313-12 121153-10

120043-08 120043-10 120893-08 120893-10 121633-08 121633-10 121633-12 121163-08 121163-10

120473-08 120473-10

NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA

NA NA

NA NA

Duration Advertised IN EX

261

2000-6200

261

2000-6200

269

2600-6800

269

2600-6800

269

2600-6600

269

2600-6600

269

2600-6700

273

2800-6800

273

2800-6800

273

2800-6900

281

3000-7000

281

3000-7000

281

3000-7000

285

3200-7000

285

3200-7000

287

3300-7200

287

3300-7200

289

3400-7300

289

3400-7300

289

3400-7300

291

3400-7200

291

3400-7200

291

3400-7400

291

3400-7500

269

Duration @ .050” IN EX

229

237

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.629

.629

Lobe Separation Intake Angle Centerline

108

104

Lopey idle, great for Power Touring. Easy on parts. Needs 2000+ stall.

269

229

237

.629

.629

110

106

Lopey idle, great for Power Touring. Easy on parts. Needs 2000+ stall.

269

237

237

.629

.629

108

104

Valve Lash IN EX

.022

.022

.022

.022

.022

Rough idle, Street/Mild Strip. Low to mid range torque & power. 9.5:1+ CR

269

237

237

.629

.629

110

106

.022

Rough idle, Street Performance/Mild Strip. Recommend 9.5:1 CR, 2500+ stall.

275

237

243

.629

.629

108

104

Fair idle, Weekend Cruiser/mild Strip. 2500+ stall recommended.

275

237

243

.629

.629

110

106

.022

.022

.022 .022

.022

.022

Mild rough idle, Street Performance/Power Touring. Reliable low to mid range power.

275

237

243

.629

.629

112

108

.022

.022

Nice idle, Street Performance/Mild Strip. Low to mid range performance. NOS OK.

279

241

247

.646

.646

108

104

.022

.022

Lopey idle, Street/Mild Bracket. Good lower mid range. 10.0:1+ CR, 2800+ stall.

279

241

247

.646

.646

110

106

.022

.022

Fair idle, High performance Street/Mild Bracket. Should have 10.0:1 CR, 2800+ stall.

279

241

247

.646

.646

112

108

Fair idle, Street/Strip, strong mid range torque. 10.0:1 CR, 2800+ stall.

281

249

249

.663

.663

110

106

Lopey idle, Pro-Street cam. Works well with small NOS system.

281

249

249

.663

.663

Hot street, Marine. Good low end performance.

287

249

255

.663

.680

112 110

108

Good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

291

253

259

.680

.663

108

106

104

.022 .022 .022 .022

.022

.022 .022 .022 .022

.022

Lopey idle, Pro Street/Bracket. Great mid range torque. 10.5-12.0:1 CR, 3400+ stall.

291

253

259

.680

.663

110

106

.022

Bracket/Pro, good mid range torque & horsepower. 10.5-12.0:1 CR, 3500+ stall.

293

255

261

.680

.703

108

104

.022

.022

.022

.022

.022

Lopey idle, Pro/Street/Bracket. High torque mid range power. Needs 11.0:1+ CR.

293

255

261

.680

.703

110

106

Good mid-range power, rough idle. Needs 11.0:1+ CR. Brackets.

295

257

263

.725

.725

108

104

.022

Lopey idle, Bracket E.T., high torque mid range power. 3500+ stall, 11.5:1+ CR.

295

257

263

.725

.725

110

106

.022

Fair idle, Pro Street/Strip. Good mid range power. 3500+ stall, 11.5:1+ CR.

295

257

263

.725

.725

112

108

.022

.022 .022 .022

Moderate idle, Pro Street/Strip. Good mid range power. 3500+ stall, 11.5:1+ CR.

299

259

267

.663

.680

108

104

Lopey idle, Bracket E.T. Good mid range torque. Needs 11.5:1+ CR.

299

259

267

.663

.680

110

106

.022

.022

Lopey idle, Bracket E.T. Mid range torque & power. 11.5:1+ CR, 3500+ stall.

301

259

269

.765

.765

108

104

.022

Rough idle, Bracket Race. Best in 454ci or smaller. 4000+ stall, 11.5:1 CR.

301

259

269

.765

.765

110

106

.022

Bracket/Pro/Super Pro, good mid to upper rpm torque/power. 12.0:1+ CR.

.022

.022

.022

.022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260 1 2 5

122

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 123

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91151 91158

NA

NA

98541 25 97128 10 97220 10 93018 10 93321 25

91151 91158

NA

NA

98541 25 97128 10 97220 10 93018 10 93321 25

91151 91158 91151 91158 91151 91158 91151 91158 91151 91158 91151 91158 91151 91158 91151 91158 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135

91158 91135 91158 91135 91158 91135 91158 91135 91158 91135

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98541 25 97128 10 97220 10 93018 10 93321 25

98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98541 25 97128 10 97220 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305

Components Notes: master note list on page 260

10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

123

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 124

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

121133-10

NA

121133-08 121133-12 121133-14 121173-08 121173-10

121663-08 121663-10 121663-12 121053-08 121253-08 121253-10 121143-08 121143-10 121143-12 121123-08 121123-10 121123-12 121123-14

121673-08 121673-10 121023-08 121023-10 121693-08

NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA NA

NA NA NA NA NA

Duration Advertised IN EX

293

3400-7200

293

3400-7300

293

3400-7400

293

3400-7500

293

3500-7500

293

3500-7600

297

3800-7600

297

3800-7700

297

3800-7800

299

3800-7600

301

4000-7800

301

4000-7900

301

4000-8000

301

4000-8000

301

4000-8000

301

4000-8000

301

4000-8000

301

4000-8000

301

4000-8000

305

4200-8000

305

4200-8000

309

4400-8200

309

4400-8200

309

4300-8000

301

Duration @ .050” IN EX

261

269

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.680

.680

Lobe Separation Intake Angle Centerline

108

Nice Bracket cam, lopey idle, needs higher stall & lower gear.

301

261

269

.680

.680

110

Nice Bracket cam, lopey idle, needs higher stall & lower gear.

301

261

269

.680

.680

112

Nice Bracket cam, lopey idle, needs higher stall. NOS OK.

301

261

269

.680

.680

114

Pro-Street, great blower cam. Multiple carb suggested.

303

261

271

.703

.708

108

Good mid-range torque & horsepower. 12.0:1 minimum.

303

261

271

.703

.708

110

309

265

277

.703

.703

104

.022

.022

108

.022

.022

106 110

108

265

277

.703

.703

110

265

277

.703

.703

104

.022

.022

.022

.022

106

112

.022

.022

Rough idle. Good upper rpm horsepower. Auto w/4000 stall. 11.0:1+.

309

.022

.022

.022

Rough idle. Good upper rpm horsepower. Auto w/4000 stall. 11.0:1+.

309

.022

104

106

Good mid-range torque & horsepower. 12.0:1 minimum.

Valve Lash IN EX

108

.022 .022

.022 .022

Rough idle. Good upper rpm horsepower. Auto w/4000 stall. 11.0:1+. OK with NOS.

309

267

277

.731

.737

108

104

Good mid to upper rpm torque & horsepower. Minimum 4500-stall.

307

269

275

.765

.714

108

104

Good mid-range to upper rpm torque & power. Heavy cars OK.

307

269

275

.765

.714

110

106

Competition use, good mid & upper power, bracket. 11.0:1+ CR.

309

269

277

.680

.680

108

104

Moderate Competition. Super mid & upper rpm torque & power.

309

269

277

.680

.680

110

106

.022

.022

.022

.022

.022 .022

.022

.022 .022

.022

Bracket/Super Pro, good upper rpm torque & power. 12.5:1 CR & race converter.

309

269

277

.680

.680

112

108

Competition, good mid & upper horsepower, bracket cars, OK w/NOS.

309

269

277

.703

.703

108

Competition use, good mid & upper horsepower, bracket cars.

309

269

277

.703

.703

110

104

106

Competition, good mid & upper horsepower, bracket cars, OK w/NOS.

309

269

277

.703

.703

112

108

.022

.022

.022

.022

.022

.022

Competition, good mid & upper horsepower, bracket cars, OK w/ small NOS.

309

269

277

.703

.703

114

110

Competition use, good mid & upper horsepower, Multi-Stage NOS.

309

273

277

.731

.737

108

104

Competition use. 13.0:1 minimum. Good mid & upper range power.

309

273

277

.731

.737

110

106

Super Gas, Great mid range. Needs good intake, 13.0:1+, 4500 stall.

315

277

283

.765

.714

Competition use, good mid & upper horsepower.

315

277

283

.765

.714

Competition use, good mid & upper horsepower.

317

277

285

.737

.714

.022 .022

.022

.022

.022

.022

.022

.022

108

104

.022

.022

108

104

.022

.022

110

Bracket/ Super Gas, heavier car. Needs race converter.

106

.022

.022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

Cam Notes: master note list on page 260 1 2 5

124

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 125

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135

91158 91135 91158 91135 91135 91198 91135 91198 91135 91198

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98844 25 97130 10 97222 10 93018 10 93321 25

98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305

Components Notes: master note list on page 260

10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

125

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 126

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

121083-10

NA

121083-08 121083-14 121233-08 121233-10 121233-12 121233-14 121043-12 121043-14 121683-08 121683-10 121623-08 121623-10 121623-12 121623-14 121093-08 121093-10 121093-14 121033-12 121803-14 121803-16 129993 129998 128997

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA

Duration Advertised IN EX

309

4300-8000

309

4300-8000

309

4300-8000

309

4400-8000

309

4200-7800

309

4000-7600

309

4000-7600

309

4400-7800

309

4200-8000

311

4400-8000

311

4500-8000

315

4600-8200

315

4500-8200

315

4400-8200

315

4800-8000

315

4800-8500

315

4800-8400

315

4800-8500

317

5200-8200

317

5000-8000

317

5000-8200

317

Duration @ .050” IN EX

277

285

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.714

.714

Lobe Separation Intake Angle Centerline

108

104

Great Super-Comp. cam. 468+CID with 12.5:1 CR-up.

317

277

285

.714

.714

110

106

Great Super-Comp. cam. 468+ with 12.5:1 CR-up, OK with NOS.

317

277

285

.714

.714

114

110

Great Super-Comp. cam. 468+ with 12.5:1 CR-up, OK with NOS.

319

277

287

.737

.737

108

319

277

287

.737

.737

110

319

277

287

.737

.737

112

277

287

.737

.737

114

277

291

.810

.810

.022

.022

323

277

291

.810

.810

114

319

279

287

.771

.737

108

319

279

287

.771

.737

110

Works great in 496+CID with high stall. Will work with NOS.

319

283

287

.765

.737

108

Competition only, needs cubic inch, high CR, stall & gears.

319

283

287

.765

.737

110

Competition only in 500+CID, needs high CR, stall & gears.

319

283

287

.765

.737

112

Competition only in 500+CID, needs high CR, stall & gears.

319

283

287

.765

.737

114

.022

327

283

295

.765

.725

108

327

283

295

.765

.725

110

All out Competition in big inch engine. Needs the best parts.

327

283

295

.765

.725

114

All out Competition in big inch engine. Needs the best parts.

327

285

295

.810

.765

550+ ci Competition with big heads & intake.

343

285

311

.850

.810

112 114

104

.022

.022

104

.022

.022

106

106 108 110

.022

.022

.022 .022

.022

285

311

.850

.810

116

Mechanical Roller Special Order Camshaft.

.022

.022

110

.022

.022

106 108 110 112

Custom Grind Camshaft, with 50-55mm Bearing, LS (C) Firing Order Mechanical Roller Special Order Camshaft.

.022

.022

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, with 50-55mm Bearing

.022

.022

550+ ci with Big Chief style heads. Great with big NOS systems.

Custom Grind Camshaft

.022

104

.022 .022

.022

550+ ci with Big Chief style heads. Needs high compression & big carburetion.

343

.022

.022

Competition only in 500+CID, needs high CR, stall & gears. Good with NOS. 540+ ci Bracket. Needs good heads, 13.0:1+ CR & high stall.

.022

.022

110

Competition only, needs cubic inch, high CR, stall & gears.

.022

108

509-540 ci with good heads. Works good with plate style NOS systems. 509-540 ci with good heads. Works good 250+ HP NOS.

.022

.022

108

106 110

112

.022

.022

.022

Great Super Class cam. Best in 540+ cubic inch. Easy on valvetrain.

323

.022

.022

Great Super Class cam. Best in 540+ cubic inch. Easy on valvetrain.

319

.022

104

Good upper RPM cam in big cubic inch engine with 13.0:1+ CR. Works great in 496+CID with high stall. Will work with NOS.

Valve Lash IN EX

.022

.022 .022

.022 .022

Cam Notes

1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5 1,2,5

1,2,5,24

Cam Notes: master note list on page 260 1 2 5

126

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 127

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91135 91198

NA

NA

98825 25 97128 10 97220 10 93018 10 93321 25

91135 91198

NA

NA

98825 25 97128 10 97220 10 93018 10 93321 25

91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198 91135 91198

91135 91198 91135 91198 --

--

--

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA --

--

--

NA

NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98825 25 97128 10 97220 10 93018 10 93321 25

98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA

98825 25 97128 10 97220 10 93018 10 93321 25

NA NA NA NA NA

98738-A 25 97130 10 97222 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25 98825 25 97128 10 97220 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA NA NA

NA NA --

--

--

98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 --

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 --

--

--

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 --

--

92151 94475

--

--

92151 94475

--

--

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94400 94402

94400 94402

94400 94402

94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305

94305

94305

94305

Components Notes: master note list on page 260

10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

127

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 128

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

4/7 Swap Steel Billet Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

124133-08

NA

124193-08 124133-10 124203-08 124203-10 124123-08 124123-10 124213-08 124223-08 124013-10 124023-08 124023-10 124243-10 124183-08 124183-10 124583-08 124043-12 124043-14 124263-10 124053-14 124623-10 124623-12 124803-14 124803-16

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

Duration Advertised IN EX

293

3800-7000

293

3400-7200

293

3800-7300

299

3800-7400

299

3800-7600

301

4000-8000

301

4000-8000

301

3800-7800

305

4200-7800

309

4400-8000

309

4400-8200

309

4400-8200

309

4500-8200

309

4300-8000

309

4300-8000

311

4500-7800

309

4600-7800

309

4200-8000

313

4400-8000

313

4600-8200

315

4400-8200

315

4400-8200

317

5000-8000

317

5000-8200

299

Duration @ .050” IN EX

261

267

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.70 Rockers IN EX

.703

.714

Lobe Separation Intake Angle Centerline

108

Good mid-range torque & horsepower. Great for brackets.

301

261

269

.680

.680

108

Nice Bracket cam, lopey idle, needs higher stall & lower gear.

301

261

269

.680

.680

110

Nice Bracket cam, lopey idle, needs higher stall & lower gear.

305

267

273

.731

.731

108

Good mid-range torque & horsepower. 11.0:1+ CR.

305

267

273

.731

.731

110

269

277

.703

.703

.022

.022

1,2,5,22

106

.022

.022

1,2,5,22

104 104

106

309

269

277

.703

269

277

.765

309

273

277

.771

315

277

283

.703

468+ CID. 12.0:1+ Strong mid-range.

315

277

283

.765

277

283

.765

277

283

.810

277

285

.703

104

.022

.022

.714

110

106

.022

.022

.737 .714 .714 .765 .714

110

106

108

104

277

285

.703

.714

317

279

285

.771

.731

323

277

291

.810

.810

323

277

291

319

281

287

.799

.765

.810

.810

540+, Strong torque. Also good tractor pull.

327

281

295

.873

.810

.022

110

106

.022

.022

110

106

108

104

110

108 112 114 110 114

319

283

287

.765

.737

319

283

287

.765

.737

Quick 16. Needs good heads. Needs 13.0:1+ CR.

343

285

311

.850

.810

104

.022

.022

110

.022

.022

108 106

.022 .022 .022

285

311

.850

.810

.022 .022

.022

.022

108

.022

.022

106

114

110

116

.022

110

.022

.022

550+ ci with Big Chief style heads. Needs high compression & big carburetion.

343

.022

.022

110 112

.022

.022

106

540+ cubic inch. 12.5:1 minimum. Race converter & NOS. Quick 16. Needs good heads. Needs 13.0:1+ CR.

.022

.022

Good in Super Gas. Up to 14.5:1 compression. 5000+ stall. Quick 16. Needs good heads.

.022

.022

104

Great Super-Comp. cam. 468+ with 12.5:1 CR-up, OK with NOS. 540 Bracket special. 13.0:1 CR, 5000+ stall.

.022

108

Good upper rpm torque & horsepower. 12.5:1+ CR. 5000+ stall.

317

.022

108

13.0:1+ CR, Good heads. Strong mid & top end.

317

.022

.737

.703

11.0:1+ CR, 4500+ Stall. Good in super gas.

315

.022 .022

11.0:1+ CR, 4500+ Stall. Good in 427-496.

315

.022 .022

Good Bracket Race cam. 11.0:1+ compression. Competition use. 12.0:1 minimum.

.022

104

Good Bracket Race cam. 11.0:1+ compression.

309

.022

108

Good Bracket Race cam. 11.0:1+ compression.

Cam Notes

104

Competition use, good mid & upper power, bracket. 11.0:1+ CR.

309

Valve Lash IN EX

112

550+ ci with Big Chief style heads. Great with big NOS systems.

.022

.022

.022 .022

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

Cam Notes: master note list on page 260 1 2 5 22

128

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 129

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

4/7 Swap Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135

NA

NA

98844 25 97130 10 97222 10 93018 10 93321 25

91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91158 91135 91135 91198 91158 91135 91158 91135 91158 91135 91135 91198 91135 91198 91135 91198

91135 91198 91135 91198 91135 91198 91135 91198 91135 91198

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98844 25 97130 10 97222 10 93018 10 93321 25

98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA

98844 25 97130 10 97222 10 93018 10 93321 25

NA NA

98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA NA NA NA NA NA

98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25 98738-A 25 97130 10 97222 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305 94305

Components Notes: master note list on page 260

10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

129

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 130

CAMSHAFTS

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

4/7 Swap Steel Billet Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

124303-12

NA

124303-08 124033-12 124313-10 124063-14 124093-14 124093-16 124093-18 129994

NA NA NA NA NA NA NA

NA

Duration Advertised IN EX

317

5400-8000

317

5200-8000

317

5500-8200

319

5000-8000

317

5200-8200

323

4800-8000

323

4800-8000

323

4600-8000

327

285

295

327

285

295

128026-09 128046-09 128086-09

CL128026-09 CL128046-09 CL128086-09

327

287

295

Big cubic inch Super-Bracket.

331

285

299

540+. Comp. & Quick 16.

351

291

319

600+ CID, Pro Heads

.725

.810 .873

Valve Lash IN EX

104

.022

.022

1,2,5,22

.765

112

108

.022

.022

1,2,5,22

351

291

319

.765

.810

114

110

.022

.022

1,2,5,22

.873 .873

.725 .867 .867

351

291

319

.873

.867

Very large cubic inch with multi-stage nitrous.

110 114 116 118

106 110 112 114

.022

.022 .022 .022

.022

.022 .022 .022

4/7 Swap Mechanical Roller Special Order Camshaft.

280

1800-5600

288 296

Cam Notes

108

Big cubic inch only. Requires huge heads.

Duration Advertised IN EX

2400-6200

.731

Lobe Separation Intake Angle Centerline

480+. Good heads 13.0:1+ CR. Some nitrous OK.

• 454-502 1996-1999

2000-5900

Valve Lift w/1.70 Rockers IN EX

327 285 295 .731 .725 112 108 .022 .022 1,2,5,22 Good upper mid to top end for 540+, Strongly suggest 13.0:1+ CR & good race converter.

Rattler Cams™ Hydraulic Roller Camshafts Cam & Lifter Set Part No.

Firing Order: 1•8•7•3•6•5•4•2

Super Gas/Super Comp. Needs good heads.

Custom Grind Camshaft

CHEVROLET BIG BLOCK GEN 6 Cam Part No.

Duration @ .050” IN EX

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22 1,2,5,22

Cam Notes

288 227 235 .555 .555 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 296 235 243 .600 .600 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

304 243 251 .600 .583 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260 1 2 5 22

130

Stock (O.E.) valve springs cannot be used. Requires Thrust Button. Requires upgraded distributor gear/fuel pump pushrod. Ignition firing order must be changed to 1-8-7-3-6-5-4-2.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 131

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK MARK IV

• 396-502 1965-1996

4/7 Swap Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91135 91198

NA

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

91135 91198

NA

NA

98738-A 25 97130 10 97222 10 93018 10 93321 25

91158 91135 91135 91198 91158 91135 91158 91135 91158 91135 91158 91135 --

NA

NA

NA

NA

NA

NA

NA

NA

--

NA

97222 10 93018 10 93321 25

98824 25

NA

97222 10 93018 10 93321 25

NA NA

98824 25

--

--

--

97222 10 93018 10 93321 25 97222 10 93018 10 93321 25 --

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91123 3 91167 33

NA

98636-K32

91123 3 91167 33

NA

98636-K32 98636-K32

--

--

Valve Springs

Steel Titanium Retainers Retainers

98636

97128 10 97216 10 93018 10 93321 25

98636 98636

Rocker Arms

Stud Girdles

90075

90120 95110/95115 92151 94475

90075 90075 90075 90075 90075 90075 90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475

94400 94402

94305

90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 90120 95110/95115 92151 94475 --

--

Rocker Arms

Stud Girdles

Pushrods

90075

90120

92151 94475

94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402 94400 94402

94305 94305 94305 94305 94305 94305

94305

• 454-502 1996-1999

Hydraulic Roller Camshaft Components NA

Valve Seals

98824 25

CHEVROLET BIG BLOCK GEN 6

91123 3 91167 33

Valve Locks

98844 25 97130 10 97222 10 93018 10 93321 25

98824 25

NA

NA

Steel Titanium Retainers Retainers

98738-A 25 97130 10 97222 10 93018 10 93321 25

NA

NA

Valve Springs

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

90075 90075

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 95108/95121

NA

94402

94309

90120

95220 95108/95121

NA

94402

94309

95220 95108/95121

NA

94402

94309

Components Notes: master note list on page 260 3 10 25 33

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. Tie bar style lifters.

Phone: 1300 350 351

Fax: 1300 350 454

131

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 132

CAMSHAFTS

CHEVROLET BIG BLOCK GEN 6

Hydraulic Roller Camshafts Cam Part No.

120226-12 120236-12 123516-10 120246-10 120246-12 122116-12 122116-14

123316-10 120326-08 120326-10 120326-12 120256-08 120256-12 121906-08 121906-11

120606-12 120606-14 120206-12 120206-14 120406-08 120406-10 120406-12 120266-10 120266-12

Cam & Lifter Set Part No.

CL120226-12 CL120236-12 CL123516-10 CL120246-10 CL120246-12 CL122116-12 CL122116-14

CL123316-10 CL120326-08 CL120326-10 CL120326-12 CL120256-08 CL120256-12 CL121906-08 CL121906-11

CL120606-12 CL120606-14 CL120206-12

CL120206-14 CL120406-08 CL120406-10 CL120406-12 CL120266-10 CL120266-12

• 454-502 1996-1999 Duration Advertised IN EX

262

1200-4400

266

1400-4600

272

1600-5000

278

1800-5400

278

1800-5400

278

1800-5600

278

1800-5600

280

2000-5600

282

2000-5700

282

2000-5800

282

2000-5800

284

2400-6000

284

2400-6000

286

2500-6100

286

2500-6200

286

2500-6200

286

2500-6500

286

2500-6300

286

2500-6300

288

2600-6400

288

2600-6400

288

2600-6400

290

2600-6500

290

2600-6500

266

Duration @ .050” IN EX

209

213

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

.510

.527

Lobe Separation Intake Angle Centerline

112

Great daily usage, smooth idle, great fuel economy.

274

213

221

.510

.538

112

108 108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

280

219

227

.555

.555

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd. Hyd. Hyd.

Good idle, Performance Street, great low to mid range. Headers suggested.

284

225

231

.567

.578

110

106

Hyd. Hyd.

Noticeable idle, Street Performance. Should have 2000+ stall, 9.5:1 CR.

284

225

231

.567

.578

112

Fair idle, Street & mild Performance usage. Crisp throttle.

288

225

235

.595

.601

112

108 108

Hyd. Hyd. Hyd. Hyd.

Mild idle, Street Performance, Great mid range torque. Headers suggested

288

225

235

.595

.601

114

110

Hyd. Hyd.

Fair idle, excellent mid range power. 2500+ stall. Also good w/roots blower, 10psi max.

280

227

227

.555

.555

110

106

Hyd. Hyd.

Mild rough idle, Hot Street. Should have good exhaust, 2500+ stall & 9.5:1 CR.

288

229

235

.589

.601

108

104

Street/Strip, 10.0:1+ CR, aftermarket dual plane intake recommended.

288

229

235

.589

.601

110

106

Fair idle, Performance usage. Mid-range torque & horsepower.

288

229

235

.589

.601

112

108

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Fair idle, Moderate Street/Mild Bracket. Good mid range. 10.0-11.5:1, 2500+ stall.

288

231

235

.578

.618

108

104

Fair idle, Performance usage. Great mid-range torque & power.

288

231

235

.578

.618

112

108

Fair idle, Performance usage. Great mid-range torque & power.

286

233

233

.601

.601

108

104

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

Rough idle, Performance Street/Mild Strip. Nice mid range. 9.5:1+ CR, 2500+ stall.

286

233

233

.601

.601

111

107

Hyd. Hyd.

Rough idle, Hot Street. Good usable mid range power band. 9.5:1+ CR, 2500+ stall.

300

233

247

.601

.612

112

108

Hyd. Hyd.

Mild idle, Hot Street. Great mid range performance. 9.5:1+ CR, 2500+ stall.

300

233

247

.601

.612

114

110

Hyd. Hyd.

Mild idle, Hot Street. Great mid range performance. Small blower or NOS OK.

298

233

245

.635

.635

112

108

Hyd. Hyd.

Fair idle, Aggressive Street. Big mid range torque. 9.5:1+ CR, 2500+ stall.

298

233

245

.635

.635

114

110

Hyd. Hyd.

Fair idle, Aggressive Street. Big mid range torque. Good with 150+ NOS or blower.

294

235

241

.618

.618

108

104

Hyd. Hyd.

Rough idle, Hot Street/Strip. Great mid range. Needs good heads, 10.0:1+ CR.

294

235

241

.618

.618

110

106

Hyd. Hyd.

Fair idle, Street/Strip, best in 496-540ci. Nice mid range power. 2600+ stall.

294

235

241

.618

.618

Rough idle, strong mid-range torque & horsepower.

296

237

243

.635

.640

Decent idle, Performance Street. Needs 10.0:1+.

296

237

243

.635

.640

112 110 112

108 106 108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

132

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 133

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK GEN 6

• 454-502 1996-1999

Hydraulic Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91123 3 91167 33

NA

98636-K32

91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33 91123 3 91167 33

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32

Valve Springs

Steel Titanium Retainers Retainers

98636

97128 10 97216 10 93018 10 93321 25

98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636 98636

98636 98636 98636 98636 98636 98636

Valve Locks

Valve Seals

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075 90075

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 95108/95121

NA

94402

94309

90120

95220 95108/95121

NA

94402

94309

90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120 90120

95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402 94402

94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309 94309

Components Notes: master note list on page 260 3 10 25 33

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. Tie bar style lifters.

Phone: 1300 350 351

Fax: 1300 350 454

133

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 134

CAMSHAFTS

CHEVROLET BIG BLOCK GEN 6

Hydraulic Roller Camshafts (cont.) Cam Part No.

120666-10 120666-12 121616-12 121616-14 126736-10 126736-14 128526-12 129996

Cam & Lifter Set Part No.

CL120666-10 CL120666-12 CL121616-12 CL121616-14 CL126736-10 CL126736-14 CL128526-12 NA

• 454-502 1996-1999 Duration Advertised IN EX

296

2800-6200

296

2800-6300

296

3000-6600

296

3000-6600

300

3000-6600

300

3000-6600

312

3200-6600

Mechanical Roller Camshafts Cam & Lifter Set Part No.

121126-10

NA

121166-12 128996

NA

NA

243

249

302

.640

.640

Lobe Separation Intake Angle Centerline

110

301

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

243

249

.640

.640

112

308

243

255

.640

.640

112

108

Hyd. Hyd.

108

308

243

255

.640

.640

114

110

1 1

Hyd. Hyd.

1

Rough idle, Bracket/Marine Performance. 540+, 12.5:1+ CR. Auto w/3500+. Blower OK.

308

247

255

.612

.612

110

106

Hyd. Hyd.

108

Hyd. Hyd.

Rough idle, Bracket 540+ with 12.5:1 minimum. Auto w/3500+ stahl.

308

247

255

.612

.612

114

Fair Idle, Bracket 540+ with 12.5-1 Auto w/7500+, Blower OK

322

259

269

.680

Most Popular 632 CID Hot Start

.680

112

110

Hydraulic Roller Special Order Camshaft.

291

Valve Lash IN EX

106

Lopey idle, Excellent mid to top end power. 10.0:1+ CR, 3200+ stall.

Duration Advertised IN EX

4000-8000

Valve Lift w/1.70 Rockers IN EX

Lopey idle, broad mid range power. 10.0:1 CR, 3000+ stall.

• 454-502 1996-1999

3400-7200

Firing Order: 1•8•4•3•6•5•7•2

Rough idle, Street/Strip, great upper mid range power. 10.0:1 CR, 3000+ stall.

Custom Grind Camshaft

CHEVROLET BIG BLOCK GEN 6 Cam Part No.

302

Duration @ .050” IN EX

299

Duration @ .050” IN EX

259

267

Hyd. Hyd.

.663

.680

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

.022

Lopey idle, Bracket E.T. Mid range torque & power. 11.5:1+ CR, 3500+ stall.

309

269

277

.703

.703

110

106

Competition, good mid & upper horsepower, bracket cars, OK w/NOS.

Custom Grind Camshaft

1 1

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.70 Rockers IN EX

1

.022

.022

1

Notes

.022

Hydraulic Roller Special Order Camshaft.

1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

134

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 135

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET BIG BLOCK GEN 6

• 454-502 1996-1999

Hydraulic Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91123 3 91161 33

NA

98636-K32

91123 3 91161 33 91123 3 91161 33 91123 3 91161 33 91123 3 91161 33 91123 3 91161 33 91123 3 91161 33 --

NA NA NA NA NA NA --

98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 98636-K32 --

Valve Springs

Steel Titanium Retainers Retainers

98636

97128 10 97216 10 93018 10 93321 25

98636 98636 98636 98636 98636 98636 --

97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 97128 10 97216 10 93018 10 93321 25 --

--

--

Rev Kit

91167 33 91135 33

NA

NA

91167 33 91135 33 --

NA --

NA --

Valve Springs

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

98844 25 97130 10 97222 10 93018 10 93321 25 98844 25 97130 10 97222 10 93018 10 93321 25 --

Rocker Arms

Stud Girdles

90075

90120

90075 90075 90075 90075 90075 90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90120

95220 95108/95121

NA

94402

94309

90120

95220 95108/95121

NA

94402

94309

90120 90120 90120 90120 --

95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 95220 95108/95121 --

NA NA NA NA NA

NA

94402 94402 94402 94402 94402

94402

94309 94309 94309 94309 94309

94309

• 454-502 1996-1999

Mechanical Roller Camshaft Components Lifters

Valve Seals

97128 10 97216 10 93018 10 93321 25

CHEVROLET BIG BLOCK GEN 6 Valve Spring, Retainer & Lock Kit

Valve Locks

--

--

--

--

Rocker Arms

Stud Girdles

90075

90120 95110/95115

90075 --

Pushrods

Fuel Pump Distributor Pushrod Gear

90120 95110/95115 --

--

Timing Set

NA

94402

94309

NA

94402

94309

NA

94402

94309

Components Notes: master note list on page 260 3 10 25 33

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. Tie bar style lifters.

Phone: 1300 350 351

Fax: 1300 350 454

135

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 136

CAMSHAFTS

CHEVROLET W-SERIES

• 348-409 1958-1965

American Muscle™ Hydraulic Flat Tappet Camshafts Cam Part No.

137651-13

Cam & Lifter Set Part No.

CL137651-13

CHEVROLET W-SERIES

Duration Advertised IN EX

266

800-4400

274

Duration @ .050” IN EX

190

198

• 348-409 1958-1965

130101-12 131101-12

132121-12

Duration Advertised IN EX

Cam & Lifter Set Part No.

CL130101-12

259

1000-5000

CL131101-12

269

1400-5400

CL132121-12

CHEVROLET W-SERIES

279

1500-5800

269

Duration @ .050” IN EX

205

215

138021-09 138051-09 138111-09

CL138021-09

279

CL138051-09 CL138111-09

281 289

1800-5600

297

2400-6000

113

110

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.75 Rockers IN EX

.490

.519

Lobe Separation Intake Angle Centerline

112

108

215

225

.519

.543

112

108

289

225

235

.543

.548

112

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

Duration Advertised IN EX

1500-5400

.411

Valve Lash IN EX

Hyd. Hyd.

1

1

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

• 348-409 1958-1965

Cam & Lifter Set Part No.

.401

Lobe Separation Intake Angle Centerline

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.75 Rockers IN EX

Near duplicate of the Chev 340HP/409 cam (GM #3744901).

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Duration @ .050” IN EX

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.75 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

Cam Notes

289 227 235 .548 .548 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 297 235 243 .548 .548 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .548 .548 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

136

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 137

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET W-SERIES

• 348-409 1958-1965

American Muscle™ Hydraulic Flat Tappet Camshaft Components Lifters

91111 3 91116

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98511-K31 25 98511 25

CHEVROLET W-SERIES

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

90075

NA

NA

90075

Lifters

Rev Kit

91111 3 91116

NA

91111 3 91116 91111 3 91116

Valve Springs

NA

98511-K31 25 98511 25

NA

98511-K31 25 98511 25

98511-K31 25 98511 25

CHEVROLET W-SERIES

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

90075 90075

Lifters

Rev Kit

91111 3 91112

NA

91111 3 91112 91111 3 91112

NA

NA

NA

NA NA

NA NA

NA

NA

NA

NA

NA

NA

NA NA NA

• 348-409 1958-1965

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

• 348-409 1958-1965

Street Force™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

Valve Springs

NA

98511-K31 25 98511 25

NA

98511-K31 25 98511 25

98511-K31 25 98511 25

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10

Rocker Arms

Stud Girdles

Pushrods

90075

NA

NA

90075 90075

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA

NA

Timing Set

NA NA NA

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

137

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 138

CAMSHAFTS

CHEVROLET W-SERIES

• 348-409 1958-1965

Hydraulic Flat Tappet Camshafts Cam Part No.

130821-10 130991-10 130501-12 130331-10 139991

Cam & Lifter Set Part No.

CL130821-10

267

1600-5200

CL130991-10

275

1800-5600

CL130501-12

277

2000-5800

CL130331-10

291

2800-6200

NA

CHEVROLET W-SERIES

Duration Advertised IN EX

267

Duration @ .050” IN EX

213

213

138025-09

275

221

221

289

223

138045-09 138085-09

280

CL138045-09

288

1800-5600

CL138085-09

CHEVROLET W-SERIES

296

2400-6000

297

237

235 243

Duration @ .050” IN EX

130445-12 131125-10

133305-12 139995

CL130445-12 CL131125-10

CL133305-12 NA

266 282

1800-6000

286

2000-6400

110

.543

.519

112

Hyd. Hyd.

1

108

Hyd. Hyd.

106

1 1

.525

.525

110

106

Hyd. Hyd.

Hyd. Hyd.

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.75 Rockers IN EX

1

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

Cam Notes

296 235 243 .618 .618 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

304 243 251 .618 .600 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

1400-5600

.548

Hyd. Hyd.

288 227 235 .571 .571 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

• 348-409 1958-1965

Cam & Lifter Set Part No.

.548

Cam Notes

106

Hydraulic Flat Tappet Special Order Camshaft.

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

110

Lopey idle, Street/Strip or nostalgia. Likes headers & gears.

Duration Advertised IN EX

1500-5400

.502

Valve Lash IN EX

Fair idle, Hot Street & mild Bracket Racing. Good mid range torque. 9.5-11.0: CR.

• 348-409 1958-1965

CL138025-09

.502

Lobe Separation Intake Angle Centerline

Nice idle, Great mid range with good throttle response.

Custom Grind Camshaft

Cam & Lifter Set Part No.

Valve Lift w/1.75 Rockers IN EX

Good idle, Strong low & mid-range torque & horsepower.

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

278

Duration @ .050” IN EX

213

225

Firing Order: 1•8•7•3•6•5•4•2

Valve Lift w/1.75 Rockers IN EX

.525

.525

Lobe Separation Intake Angle Centerline

112

Good idle, Street Performance/Daily Driver. 9.0:1+ CR.

286

229

233

.560

.572

110

108 106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Nice idle, Performance Street. Best with improved intake & exhaust, 2000+ stall.

294

233

241

.601

.618

112

108

Hyd. Hyd.

Fair idle, Hot Street Rod/Strip. 10.0:1+, good intake & exhaust, 2400+ stall.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

138

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 139

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET W-SERIES

• 348-409 1958-1965

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91111 3 91112

NA

91111 3 91112 91111 3 91112 91111 3 91112 91111 91112

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98511-K31 25 98511 25

NA

98511-K31 25 98511 25

NA

NA

98511-K31 25 98511 25 98511-K31 25 98511 25 --

--

CHEVROLET W-SERIES

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 97110 -93015 93321 25 97128 10 97216 10 93018 10 --

--

--

--

Rocker Arms

Stud Girdles

Pushrods

90075

NA

NA

90075 90075 90075

90075

NA NA NA

NA

NA NA NA --

Lifters

Rev Kit

91364 3 91360

NA

NA

91364 3 91360

91364 3 91360

NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

98511 25 97128 10 97216 10 93018 10 93321 25

NA

98511 25 97128 10 97216 10 93018 10 93321 25

98511 25 97128 10 97216 10 93018 10 93321 25

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91364 3 91360

NA

NA

91364 3 91360 91364 91360

NA NA

NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

NA

98511 25 97128 10 97216 10 93018 10 93321 25

NA

98511 25 97128 10 97216 10 93018 10 93321 25

--

NA

NA

NA

NA NA

NA

NA NA

NA

NA NA NA NA

NA

Rocker Arms

Stud Girdles

Pushrods

90075

NA

NA

90075 90075

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA

NA

Timing Set

NA NA NA

• 348-409 1958-1965

Retro-Fit Hydraulic Roller Camshaft Components 91364 3 91360

Valve Seals

NA

CHEVROLET W-SERIES

NA

Timing Set

• 348-409 1958-1965

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

98511 25 97128 10 97216 10 93018 10 93321 25 --

--

--

--

--

Rocker Arms

Stud Girdles

Pushrods

90075

NA

NA

90075 90075

90075

NA NA

NA

NA NA --

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA

NA NA

Timing Set

NA NA NA

NA

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

139

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 140

CAMSHAFTS

CHEVROLET W-SERIES

• 348-409 1958-1965

Mechanical Flat Tappet Camshafts Cam Part No.

131672-10 131742-10 132322-10 139992

Duration Advertised IN EX

Cam & Lifter Set Part No.

CL131672-10 CL131672-10DL 4 CL131742-10 CL131742-10DL 4 CL132322-10 CL132322-10DL 4 NA

CHEVROLET W-SERIES

275

2800-6400

283

3200-6800

295

3800-7200

139993

NA

289

248

751082-12 752002-10 759992

254

CL751082-12 CL752002-10 NA

.589

.589

303

260

Custom Grind Camshaft

.624

.642

268

.648

.642

Duration @ .050” IN EX

Duration Advertised IN EX

255

1800-5600

110

106 106

110

106

.022

.022

.022

.022

.022

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.75 Rockers IN EX

Mechanical Roller Special Order Camshaft.

249

110

Valve Lash IN EX

Cam Notes

1

.022

1 1 1

Mechanical Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

1200-5000

Lobe Separation Intake Angle Centerline

Rough idle, Great for stroker combinations. Best in light car, 11.5:1+ CR.

• 170-225 1960-1987

Cam & Lifter Set Part No.

Valve Lift w/1.75 Rockers IN EX

Rough idle, Serious Street Rod/Bracket. Need good intake & exhaust.

Mechanical Flat Tappet Camshafts Cam Part No.

240

• 348-409 1958-1965

Cam & Lifter Set Part No.

CHRYSLER SLANT 6

240

Firing Order: 1•8•4•3•6•5•7•2

Fair idle, Street/Strip. Nice mid range torque & performance.

Custom Grind Camshaft

Mechanical Roller Camshafts Cam Part No.

275

Duration @ .050” IN EX

249

Duration @ .050” IN EX

214

214

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.50 Rockers IN EX

.450

.450

Smooth idle, High torque, low rpm power band.

255

220

220

Lobe Separation Intake Angle Centerline

.473

.473

Lobe Separation Intake Angle Centerline

112 110

108 106

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

.022 .022

.022

1,5

.022

Smooth idle, good low to mid range torque & power. Excellent for trucks & towing.

Custom Grind Camshaft

Mechanical Flat Tappet Special Order Camshaft.

1 1 1

Cam Notes: master note list on page 260 1 4 5

140

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires upgraded distributor gear/fuel pump pushrod.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 141

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHEVROLET W-SERIES

• 348-409 1958-1965

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91115 3 91118 4

NA

NA

91115 3 91118 4 91115 3 91118 4 91115 91118

NA NA

NA

Valve Springs

Steel Titanium Retainers Retainers

98511 25 97128 10 97216 10 93018 10 93321 25

NA

98511 25 97128 10 97216 10 93018 10 93321 25

98511 25 97128 10 97216 10 93018 10 93321 25

--

--

--

--

--

NA

Valve Spring, Retainer & Lock Kit

--

CHRYSLER SLANT 6 Lifters

Rev Kit

91715-12 3

NA

NA

91715-12 3 91715-12

NA

NA

Stud Girdles

Pushrods

90075

NA

NA

90075 90075

NA NA

NA NA --

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA

NA NA

Timing Set

NA NA NA

--

--

90075

NA

Valve Springs

--

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

--

--

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

NA

NA

--

NA

--

90075

NA

--

NA

NA

NA

• 170-225 1960-1987

Mechanical Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Rocker Arms

• 348-409 1958-1965

Mechanical Roller Camshaft Components Rev Kit

Valve Seals

NA

CHEVROLET W-SERIES Lifters

Valve Locks

Valve Springs

NA

98341-12 25

NA

--

Steel Titanium Retainers Retainers

98341-12 25

NA

NA

NA

NA

NA

NA

NA NA

NA NA

NA NA

NA NA

NA NA

NA

NA

NA

NA

NA

NA

NA NA NA

Components Notes: master note list on page 260 3 4 10 25

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

141

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 142

CAMSHAFTS

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

710011-12

710031-12 712121-12

Cam & Lifter Set Part No.

CL710011-12

CL710031-12 CL712121-12

Duration Advertised IN EX

259

1200-4600

267

1500-5000

279

1600-5800

CHRYSLER SMALL BLOCK LA •

267

Duration @ .050” IN EX

205

213

718001-09 718041-09 718081-09

Cam & Lifter Set Part No.

CL718001-09 CL718041-09 CL718081-09

Cam Part No.

710021-11 711381-10 711021-10

710931-12 711651-10 711451-08

710991-08

Cam & Lifter Set Part No.

CL710021-11

CL711381-10 CL711021-10

CL710931-12 CL711651-10 CL711451-08

CL710991-08

Cam Notes: master note list on page 260

277

112

108

213

223

.450

.465

112

108

289

225

235

.465

.470

112

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

281

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd. Hyd. Hyd.

1

289

2300-6000

297

2500-6400

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

289 227 235 .480 .488 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 297 235 243 .488 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .507 .495 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

273, 340, 360 1964-2003 • 318 1967-1991 Duration Advertised IN EX

263

1200-4600

255

1400-4800

267

1500-4800

269

1500-5200

265

1800-5600

267

1800-5800

275

1800-5800

263

Duration @ .050” IN EX

209

209

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.420

.420

Lobe Separation Intake Angle Centerline

261

208

214

.479

.494

Fair idle, very strong torque. Best in 273-318.

267

213

213

.450

.450

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,15

111

107

Hyd. Hyd.

110

106

Hyd. Hyd.

Fair idle. Great for Street Performance. Car or truck, good torque.

110

106

Strong mid-range torque. Needs 4 barrel & good flowing exhaust. 1800+ stall.

269

215

215

.455

.455

112

Great cam for use in Performance Street cars & PUs.

273

218

226

.502

.525

110

108 106

Mild idle, Street/Street Performance. Excellent throttle response.

267

220

220

.506

.506

108

104

Good low & mid-range horsepower. Needs 4 barrel & headers.

275

221

221

.470

.470

108

104

Good low & mid-range horsepower. Needs 4 barrel & headers.

1 Stock (O.E.) valve springs cannot be used. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

142

Phone: 1300 350 351

.430

Valve Lash IN EX

273, 340, 360 1964-2003 • 318 1967-1991

2000-5800

Hydraulic Flat Tappet Camshafts

.420

Lobe Separation Intake Angle Centerline

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

Duration Advertised IN EX

CHRYSLER SMALL BLOCK LA •

Valve Lift w/1.50 Rockers IN EX

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Fax: 1300 350 454

Hyd. Hyd. Hyd. Hyd.

1,15

Hyd. Hyd.

1

Hyd. Hyd.

1,15

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 143

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91711 3 91712

NA

91711 3 91712

91711 3 91712

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

-98412 98438-K34 25 98438 25

NA

-98412 98438-K34 25 98438 25

-98412 98438-K34 25 98438 25

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

-97110

NA

93066

93321 25

-97110

NA

93066

93321 25

-97110

CHRYSLER SMALL BLOCK LA •

NA

93066

NA NA

Lifters

Rev Kit

91711 3 91712

NA

91711 3 91712 91711 3 91712

Valve Springs

NA

98438-K34 25 98438 25

NA

98438-K34 25 98438 25

98438-K34 25 98438 25

Steel Titanium Retainers Retainers

Valve Locks

Lifters

Rev Kit

91711 3 91712

NA

91711 3 91712 91711 3 91712

91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712

Valve Springs

NA

-98412 98438-K34 25 98438 25

NA

-98412 98438-K34 25 98438 25

NA

98438-K34 25 98438 25

NA NA NA

98438-K34 25 98438 25

-98412 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

NA

93066

93321 25

97110

NA

93066

93321 25

97110

NA

93066

NA

NA

94330

NA

NA

94330

NA

NA

94330

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA

NA

94330

273, 340, 360 1964-2003 • 318 1967-1991

Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

Valve Seals

97110

CHRYSLER SMALL BLOCK LA •

NA

NA

Timing Set

273, 340, 360 1964-2003 • 318 1967-1991

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

NA

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

-97110

NA

Valve Locks

93066

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

93321 25

97110

NA

93066

93321 25

-97110

NA

93066

93321 25

-97110

NA

93066

93321 25

97110

NA

93066

93321 25

97110

NA

93066

93321 25

97110

NA

93066

93321 25

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA NA NA

NA NA NA NA NA

94330 94330 94330 94330 94330

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

143

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 144

CAMSHAFTS

CHRYSLER SMALL BLOCK LA •

Hydraulic Flat Tappet Camshafts Cam Part No.

712221-08 710461-10 710581-10 712231-09 711791-08

712901-12 710831-08 711351-08

716771-08 710881-08 719991

Cam & Lifter Set Part No.

CL712221-08 CL710461-10 CL710581-10 CL712231-09 CL711791-08

CL712901-12 CL710831-08 CL711351-08

CL716771-08 CL710881-08 NA

273, 340, 360 1964-2003 • 318 1967-1991 Duration Advertised IN EX

279

2200-5500

273

2200-6000

277

2600-6200

285

2600-6000

283

2800-6400

294

2300-6500

289

2800-6400

291

2800-6500

301

3000-6500

295

4200-7000

279

Duration @ .050” IN EX

225

718005-09 718045-09 718085-09

Cam & Lifter Set Part No.

CL718005-09 CL718045-09 CL718085-09

.465

.465

Lobe Separation Intake Angle Centerline

277

226

230

.525

.531

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,15

105

Hyd. Hyd.

1

108

Hyd. Hyd.

108

104

Hyd. Hyd.

110

106

Hyd. Hyd.

110

Fair idle, Hot Street & mild Bracket Racing.

283

230

236

.531

.547

106

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

285

231

231

.480

.480

109

Runs strong 3,500 & up. 9.5+ comp., auto OK with gears.

287

236

240

.547

.559

108

104

Lopey idle, good mid-range power. Needs 3200+ stall.

300

241

247

.390

.410

112

Fair idle, Circle Track Lift Rule Only. Strong mid-range.

289

242

242

.562

.562

295

244

248

.566

.578

Hot Street/Bracket, strong mid range performance.

301

247

247

.510

.510

248

254

.578

.590

1,15 1,15

108

104

Hyd. Hyd.

1,15

108

104

Hyd. Hyd.

1,15

108

104

Rough idle. Hot Street/Strip, strong mid range performance.

301

1

Hyd. Hyd.

Fair idle, Street/Strip. Nice mid range power. Needs at least 9.5:1 CR, 3200+ stall.

108

104

Hyd. Hyd. Hyd. Hyd.

Rough idle, Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR. Hydraulic Flat Tappet Special Order Camshaft.

Hyd. Hyd.

1,15 1,15 1

273, 340, 360 1964-2003 • 318 1967-1991

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Valve Lift w/1.50 Rockers IN EX

Mid-range & top end horsepower & torque. Needs 4bbl., gears, headers.

Custom Grind Camshaft

CHRYSLER SMALL BLOCK LA •

225

Firing Order: 1•8•4•3•6•5•7•2

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6000

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

288 227 235 .525 .530 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 296 235 243 .530 .530 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

304 243 251 .530 .515 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

144

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 145

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

91711 3 91712

NA

91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 91712

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

-98412 98438-K34 25 98438 25

NA

98438-K34 25 98438 25

NA NA NA NA NA NA NA

NA

98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 --

--

Steel Titanium Retainers Retainers

-97110

NA

Valve Locks

93066

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

93321 25

97110

NA

93066

93321 25

97110

NA

93066

93321 25

97110 97110 97110 97110 97110 97110 97110 --

CHRYSLER SMALL BLOCK LA •

NA

93066

NA

93066

NA

93066

NA

93066

NA

93066

NA

93066

NA

93066

--

--

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA --

Lifters

Rev Kit

91764 3

NA

91764 3 91764 3

Valve Springs

NA

98438-K34 25 98438 25

NA

98438-K34 25 98438 25

98438-K34 25 98438 25

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA

NA

94330 94330 94330 94330 94330 94330 94330 94330

94330

273, 340, 360 1964-2003 • 318 1967-1991

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

97110

NA

93066

93321 25

97110

NA

93066

93321 25

97110

NA

93066

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA

NA

94330

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

145

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 146

CAMSHAFTS

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

713175-10 711915-12

710525-10 712105-10 710665-10 719995

Cam & Lifter Set Part No.

CL713175-10 CL711915-12

CL710525-10 CL712105-10 CL710665-10 NA

Duration Advertised IN EX

272

1600-5600

274

1200-5700

282

2000-6000

288

2400-6300

294

2800-6500

278

Duration @ .050” IN EX

219

710862-08 711262-08

712382-08 712392-06 712362-08 712712-08 712532-06 712322-08 710782-06 710782-08 719992

Cam & Lifter Set Part No.

CL710862-08 CL710862-08DL 4 CL711262-08 CL711262-08DL 4 CL712382-08 CL712382-08DL 4 CL712392-06 CL712392-06DL 4 CL712362-08 CL712362-08DL 4 CL712712-08 CL712712-08DL 4 CL712532-06 CL712532-06DL 4 CL712322-08 CL712322-08DL 4 CL710782-06 CL710782-06DL 4 CL710782-08 CL710782-08DL 4 NA

.525

.525

Lobe Separation Intake Angle Centerline

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

278

221

225

.475

.500

112

108

1

Mild idle, Street Performance, big low end torque. Should have 9.0:1+ CR, 1800+ stall.

286

229

233

.520

.515

110

106

Hyd. Hyd.

1

Lopey idle, Hot Street, great mid range acceleration & torque. 9.5:1 CR, 2500+ stall.

294

235

241

.530

.530

110

106

Hyd. Hyd.

1

Rough idle, Street/Strip, great mid range. 9.5:1+ CR, 2800+ stall & good intake.

300

241

247

.545

.550

110

106

Hyd. Hyd.

1

Rough idle, Pro Street/Strip. Needs 10.0:1+ CR, 2800+ stall & at least 4.10 gears. Retro-Fit Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

1

273, 340, 360 1964-2003 • 318 1967-1991

Mechanical Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.50 Rockers IN EX

Good idle, Performance Street, good low to mid range torque. 9.0:1+ CR, 2200+ stall.

Custom Grind Camshaft

CHRYSLER SMALL BLOCK LA •

225

Firing Order: 1•8•4•3•6•5•7•2

Duration Advertised IN EX

266

2400-6200

281

3000-6600

281

3000-6800

285

3200-7000

289

3400-7400

282

3400-7400

295

3600-7400

295

3600-7600

296

4000-7600

296

4000-7600

266

Duration @ .050” IN EX

238

238

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.558

.558

Lobe Separation Intake Angle Centerline

108

104

Valve Lash IN EX

.018

Street/Strip & mild Bracket. Strong low to mid range. 9.5:1 CR, 2500+ stall.

281

246

246

.536

.536

108

104

.022

Rough idle, Pro Street/Bracket, strong mid range power. 3000+ stall, 9.5:1 CR.

285

246

250

.520

.525

108

104

Street/Strip, good Oval Track cam for limited induction systems.

291

250

256

.525

.535

106

102

Street/Strip, good Oval Track cam for limited induction systems.

295

254

260

.550

.555

108

104

.022 .022 .022

Lopey idle. Oval Track, Street/Strip with 10.0:1+ CR. Auto needs 3500+ stall.

288

254

260

.599

.616

108

104

.022

Lopey idle. Oval Track, Street/Strip with 10.0:1+ CR. Auto needs 3500+ stall.

299

260

264

.565

.565

106

102

Strong mid range & upper end power. Needs good intake & exhaust.

305

260

270

.555

.566

108

Hot Street/Bracket. Must have 11.0:+ CR & 4000+ stall.

302

268

274

.632

.643

106

104 102

.022 .022 .018

Bracket/Super Street, Nice top end power. Should have 12.0:1 CR, 4500+ stall.

302

268

274

.632

.643

108

104

.018

Bracket/Super Street, Nice top end power. Should have 12.0:1 CR, 4500+ stall.

Custom Grind Camshaft

Cam Notes

.018

1,15,34

.022

1

.022

1

.022 .022

1 1

.022

1,15

.022

1

.022 .018 .018

1

1,15,34 1,15,34

Mechanical Flat Tappet Special Order Camshaft.

1

Cam Notes: master note list on page 260 1 4 15 34

146

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Lobes designed to take maximum advantage of .904” dia. lifter. Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 147

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91764 3

NA

91764 3 91764 3 91764 3 91764 3 91764

Valve Spring, Retainer & Lock Kit

Valve Springs

NA

98438-K34 25 98438 25

NA

98438-K34 25 98438 25

NA NA

NA

98438-K34 25 98438 25 98438-K34 25 98438 25 98438-K34 25 98438 25 --

--

Steel Titanium Retainers Retainers

Valve Locks

Rev Kit

91715 3 91718 4

NA

NA

91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 91718

NA NA NA NA NA NA NA NA NA

NA

Valve Springs

93321 25

NA

NA

NA

93321 25

97110

NA

93066

93321 25

97110 97110 97110 --

NA

93066

NA

93066

NA

93066

--

--

93321 25 93321 25 --

Steel Titanium Retainers Retainers

Valve Locks

NA

NA

NA 35

93321 25

NA --

98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 --

--

NA

98438 25 97128 10 97216 10

NA

NA

NA

93321 25

NA

NA

NA

NA

NA

Pushrods

93321 25

NA

NA

NA

NA

Stud Girdles

NA 35

NA

NA

NA

NA

Rocker Arms

98438 25 97128 10 97216 10

NA

NA

NA

Valve Seals

NA

NA

NA

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA

NA

NA NA NA

NA

94330 94330 94330

94330

273, 340, 360 1964-2003 • 318 1967-1991

--

--

NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 --

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

Pushrods

93066

Components Notes: master note list on page 260 3 4 10 25

Stud Girdles

NA

Mechanical Flat Tappet Camshaft Components Lifters

Rocker Arms

97110

CHRYSLER SMALL BLOCK LA • Valve Spring, Retainer & Lock Kit

Valve Seals

Fax: 1300 350 454

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA

NA

94330 94330 94330 94330 94330 94330 94330 94330

94330

35 10° Multi-Groove for OE style valves not available (93018 single-groove).

Web: www.fabre.com.au

147

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 148

CAMSHAFTS

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Steel Billet Mechanical Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

711313-08

NA

711213-10 711153-06

712113-08 711013-06 711133-08

712123-06 711113-08

710563-06 710563-08 719993 719994

Duration Advertised IN EX

NA

261

2400-6000

277

2800-6200

NA

277

2800-6400

NA

277

2800-6800

NA

283

3000-6800

NA

289

3400-7000

NA

291

3800-7600

NA

295

4000-7800

NA

305

4200-8000

NA

305

4200-8000

NA NA

770225-14 770055-12 771915-12 770525-10 772105-10 770665-10 779995

CL770225-14

CL770055-12 CL771915-12 CL770525-10 CL772105-10 CL770665-10 NA

Cam Notes: master note list on page 260 1 5

.555

.555

Lobe Separation Intake Angle Centerline

110

106

277

245

245

.585

.585

Valve Lash IN EX

.022

.022

108

104

.022

.022

108

104

.022

.022

Fair idle, Street/Strip, good mid range torque. 10.0:1 stall, 3500+ stall & good intake.

281

245

249

.585

.585

106

Lopey idle, great oval track & heavy drag car.

285

245

253

.600

340-360 ci. Hot Street & mild Bracket.

289

251

257

.640

.600 .640

Good mid & upper horsepower, Great for Brackets.

299

257

267

.640

.645

299

259

267

.640

.645

102

106

102

108

Strong mid-range & upper end horsepower, 12.0:1+ CR.

106

104

11.5:1+ Comp. Good heads. Strong mid & upper horsepower.

305

263

273

.640

.645

108

12.5:1+ Comp. Good heads. Strong mid to top end.

311

273

279

.680

.640

106

102 104

102

Rough idle, Bracket/Super Gas. Needs high compression & 5000+ stall.

311

273

279

.680

.640

108

104

Rough idle, Bracket/Super Gas. Needs high compression & 5000+ stall.

.022 .022 .022 .022 .022

.022 .022

.022 .022 .022 .022 .022

.022 .022

Mechanical Roller Special Order Camshaft.

Duration Advertised IN EX

254

800-5000

• 1992-2002

262

1000-5200

274

1200-5700

282

2000-6000

288

2400-6300

294

2800-6500

262

Duration @ .050” IN EX

201

209

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.60 Rockers IN EX

.480

.480

Lobe Separation Intake Angle Centerline

209

217

.496

1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Good idle, Performance Street, good low to mid range torque. 8.5:1+ CR.

270

Cam Notes

1,5

Mechanical Roller Special Order Camshaft.

.496

112

108

Good idle, Performance Street, good low to mid range torque. 9.0:1+ CR.

278

221

225

.507

.533

112

108

Hyd. Hyd.

Mild idle, Street Performance, big low end torque. Should have 9.0:1+ CR, 1800+ stall.

286

229

233

.555

.549

110

106

Hyd. Hyd.

Lopey idle, Hot Street, great mid range acceleration & torque. 9.5:1 CR, 2500+ stall.

294

235

241

.565

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip, great mid range. 9.5:1+ CR, 2800+ stall & good intake.

300

241

247

.581

.587

110

106

Hyd. Hyd.

Rough idle, Pro Street/Strip. Needs 10.0:1+ CR, 2800+ stall & at least 4.10 gears.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

Stock (O.E.) valve springs cannot be used. Requires upgraded distributor gear/fuel pump pushrod.

148

Phone: 1300 350 351

237

Valve Lift w/1.50 Rockers IN EX

Custom Grind Camshaft, “R” Block

Hydraulic Roller Camshafts Cam & Lifter Set Part No.

229

Firing Order: 1•8•4•3•6•5•7•2

Fair idle, Street Performance/Mild Bracket. 2500+ stall, 9.5:1 CR.

Custom Grind Camshaft

CHRYSLER 5.2L • 5.9L MAGNUM Cam Part No.

269

Duration @ .050” IN EX

Fax: 1300 350 454

Hyd. Hyd.

1 1 1 1 1 1

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 149

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER SMALL BLOCK LA •

273, 340, 360 1964-2003 • 318 1967-1991

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91750 91717

NA

NA

91750 91717 91750 91717 91750 91717 91717 91734 91717 91734 91717 91734 91717 91734 91717 91734 91717 91734 ---

NA

NA NA

98541 25 97128 10 97220 10 NA

98637 25

97220 10

98543 25 97130 10 97220 10 98543 25 97130 10 97220 10 98543 25 97130 10 97220 10 98543 25 97130 10 97220 10 98543 25 97130 10 97220 10 --

--

--

--

--

--

CHRYSLER 5.2L • 5.9L MAGNUM

--

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91764 3,33

NA

NA

91764 3,33 91764 3,33 91764 3,33 91764 3,33 91764 33

NA NA NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

NA

NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 --

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 ---

Valve Locks

NA NA NA

NA NA

NA NA NA NA

NA NA

NA NA NA NA NA ---

NA

NA

NA

98438 25 97128 10 97216 10

NA 35

93321 25

98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 98438 25 97128 10 97216 10 --

NA

NA

NA

93321 25

NA

--

NA

NA

NA

Pushrods

93321 25

NA

NA

NA

NA

Stud Girdles

NA 35

NA

NA

NA

NA

Rocker Arms

98438 25 97128 10 97216 10

NA

NA

NA

Valve Seals

NA

--

--

Included in Cam & Lifter Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required. Tie bar style lifters.

Phone: 1300 350 351

NA

NA

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94415

94330

NA

94415

94330

NA NA NA NA NA NA NA NA

NA NA

94415 94415 94415 94415 94415 94415 94415 94415 NA NA

94330 94330 94330 94330 94330 94330 94330 94330

94330 94330

• 273, 340, 360 1964-2003 • 318 1967-1991

Components Notes: master note list on page 260 3 10 25 33

NA 35

--

Hydraulic Roller Camshaft Components 91764 3,33

NA

93321 25

--

NA

93321 25

NA 35

NA

NA

Pushrods

98541 25 97128 10 97220 10

NA

NA

Stud Girdles

NA

98541 25 97128 10 97220 10

NA

NA

Rocker Arms

93321 25

NA

NA

Valve Seals

NA 35

NA

NA

Valve Locks

98541 25 97128 10 97220 10

NA

NA

Steel Titanium Retainers Retainers

NA

NA

NA

Valve Springs

Fax: 1300 350 454

NA 35 NA 35 NA 35 NA 35 --

93321 25 93321 25 93321 25 --

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA NA

NA

NA NA NA NA

NA

94330 94330 94330 94330

94330

35 10° Multi-Groove for OE style valves not available (93018 single-groove).

149

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 150

CAMSHAFTS

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC720031-12

NA

MC720931-11

MC722241-08

NA

NA

Duration Advertised IN EX

267

1000-5000

269

1400-5200

289

2600-6400

CHRYSLER BIG BLOCK B/RB

267

Duration @ .050” IN EX

213

213

Valve Lift a/1.50 Rockers IN EX

.450

.450

Super low & mid-range performance. Good idle.

277

215

223

.445

.465

727511-13

Cam & Lifter Set Part No.

CL727511-13

289

235

235

720031-12 720141-12 721161-12

Cam & Lifter Set Part No.

CL720031-12 CL720141-12 CL721161-12

112

108

.488

.488

108

104

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

• 383-440 1959-1980

260

1400-5000

268

Duration @ .050” IN EX

206

208

• 383-440 1959-1980 Duration Advertised IN EX

269

1400-5200

279

1600-5600

289

2600-6400

Valve Lift w/1.50 Rockers IN EX

.434

.434

Lobe Separation Intake Angle Centerline

113

Near duplicate of the Chrysler 365HP/440 cam (#2532190).

Street Force™ Hydraulic Flat Tappet Camshafts (Single Bolt) Cam Part No.

107

Runs strong 3,500 & up. 9.5+ comp., auto OK with gears.

Duration Advertised IN EX

CHRYSLER BIG BLOCK B/RB

111

Good idle & throttle response. Needs 4 barrel & good exhaust.

American Muscle™ Hydraulic Flat Tappet Camshafts (Single Bolt) Cam Part No.

Lobe Separation Intake Angle Centerline

277

Duration @ .050” IN EX

215

223

110

Valve Lash IN EX

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.445

.465

Lobe Separation Intake Angle Centerline

112

108

289

225

235

.490

.488

112

108

299

235

245

.488

.488

112

108

1

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust. Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

Cam Notes

Hyd. Hyd.

Street Force™ 4, Lopey idle, good mid-range power. Needs 2800+ stall.

1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

150

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 151

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91711 3 91712

NA

98515-K33

91711 3 91712 91711 3 91712

NA NA

98515-K33 98515-K33

Valve Springs

98515

98515 98515

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

97110

--

93065

93321 25

97110

--

93065

93321 25

97110

CHRYSLER BIG BLOCK B/RB

--

93065

NA NA

NA NA

NA NA

Lifters

91711 3 91712

Rev Kit

NA

98515-K33

Valve Springs

98515

Steel Titanium Retainers Retainers

97110

CHRYSLER BIG BLOCK B/RB

--

Valve Locks

93065

Valve Seals

93321 25

Rocker Arms

NA

Lifters

Rev Kit

91711 3 91712

NA

98515-K33

91711 3 91712 91711 3 91712

NA NA

98515-K33 98515-K33

Valve Springs

98515

98515 98515

92152

NA

94335

92152

NA

94335

92152

NA

94335

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Fuel Pump Distributor Pushrod Gear

NA

NA

92152

NA

Timing Set

94335

• 383-440 1959-1980

Street Force™ Hydraulic Flat Tappet Camshaft Components Valve Spring, Retainer & Lock Kit

Timing Set

• 383-440 1959-1980

American Muscle™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

97110

--

93065

93321 25

97110

--

93065

93321 25

97110

--

93065

NA NA

NA NA

NA NA

Timing Set

92152

NA

94335

92152

NA

94335

92152

NA

94335

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

151

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 152

CAMSHAFTS

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Rattler Cams™ Hydraulic Flat Tappet Camshafts (Single Bolt) Cam Part No.

728001-09 728041-09 728081-09

Cam & Lifter Set Part No.

CL728001-09 CL728041-09 CL728081-09

Duration Advertised IN EX

281

1800-5600

289

2000-6000

297

2400-6400

CHRYSLER BIG BLOCK B/RB

720021-11 720931-11 721141-08

721941-12 720581-10 722241-08 721201-08 722251-09 720881-08 729991 729994

Cam & Lifter Set Part No.

CL720021-11 CL720931-11 CL721141-08

CL721941-12 CL720581-10 CL722241-08 CL721201-08 CL722251-09 CL720881-08 NA NA

267

1000-5000

267

1600-5400

271

1800-5400

277

2400-6200

289

2600-6400

285

2800-6600

297

3000-6800

295

3400-7200

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

305 243 251 .507 .495 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

263

Valve Lift w/1.50 Rockers IN EX

297 235 243 .488 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 383-440 1959-1980

800-4800

Firing Order: 1•8•4•3•6•5•7•2

289 227 235 .480 .488 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

Hydraulic Flat Tappet Camshafts (Single Bolt) Cam Part No.

Duration @ .050” IN EX

263

Duration @ .050” IN EX

209

209

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.420

.420

Lobe Separation Intake Angle Centerline

267

213

213

.450

.450

267

220

220

.506

.506

224

234

.518

.543

230

236

.531

.547

108

104

Hyd. Hyd.

1,15

Hyd. Hyd.

1,15

111

107

112

108

110

106

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

289

235

235

.488

.488

108

Runs strong 3,500 & up. 9.5+ comp., auto OK with gears.

289

238

242

.555

.562

108

Lopey idle, Hot Street/Bracket. Good mid range power band.

305

243

251

.519

.540

109

248

254

.578

.590

108

Hyd. Hyd.

105

Hyd. Hyd.

104 104

Rough idle, Hot Street/Bracket, strong mid & top end performance.

Custom Grind Camshaft (Single-Bolt)

Hydraulic Flat Tappet Special Order Camshaft.

Custom Grind Camshaft (3-Bolt)

Hydraulic Flat Tappet Special Order Camshaft.

Hyd. Hyd.

104

Hot Pro-Street/Bracket. Strong mid-range, needs 11.0-1 CR-up.

301

1

Hyd. Hyd.

Fair idle, Hot Street & mild Bracket Racing. Strong mid range.

283

Hyd. Hyd.

107

Good low & mid-range horsepower. Needs 4 barrel & headers.

281

Cam Notes

111

Smooth idle, strong low end. High vacuum, good fuel economy. Super low & mid-range performance. Good idle.

Valve Lash IN EX

1,15 1

Hyd. Hyd.

1,15

Hyd. Hyd.

1,15

Hyd. Hyd.

1

Hyd. Hyd.

1 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

152

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 153

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Rattler Cams™ Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91711 3 91712

NA

98529-K33

91711 3 91712 91711 3 91712

NA NA

98529-K33 98529-K33

Valve Springs

98529

98529 98529

Steel Titanium Retainers Retainers

Valve Locks

Rev Kit

91711 3 91712

NA

98515-K33

91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 91712 91711 91712

NA NA NA NA NA NA NA NA

NA

98515-K33 98515-K33 98529-K33 98529-K33 98529-K33 98529-K33 98529-K33 98529-K33

NA

---

Valve Springs

98515

98515 98515 98529 98529 98529 98529 98529 98529 --

Stud Girdles

Pushrods

93321 25

NA

NA

NA

--

93065

93321 25

97110

--

93065

93321 25

97110

--

93065

Steel Titanium Retainers Retainers

Valve Locks

NA

NA NA

NA NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

97110

--

93065

93321 25

97110

--

93065

93321 25

97110 97110 97110 97110 97110 97110 97110

--

NA

Fuel Pump Distributor Pushrod Gear

Timing Set

92152

NA

94335

92152

NA

94335

92152

NA

94335

• 383-440 1959-1980

Hydraulic Flat Tappet Camshaft Components Lifters

Rocker Arms

97110

CHRYSLER BIG BLOCK B/RB Valve Spring, Retainer & Lock Kit

Valve Seals

---

----------

93065 93065 93065 93065 93065 93065 93065 ---

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 ---

NA NA NA NA NA NA NA NA

NA NA

NA NA NA NA NA NA NA NA

NA NA

NA NA NA NA NA NA NA NA ---

Fuel Pump Distributor Pushrod Gear

Timing Set

92152

NA

94335

92152

NA

94335

92152 92152 92152 92152 92152 92152 92152

92152 92152

NA NA NA NA NA NA NA

NA NA

94335 94335 94335 94335 94335 94335 94335

94330 94330

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

153

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 154

CAMSHAFTS

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts (3 Bolt) Cam Part No.

728005-09 728045-09 728085-09

Cam & Lifter Set Part No.

CL728005-09 CL728045-09 CL728085-09

Duration Advertised IN EX

280

1800-5400

288

2000-5600

296

2400-6200

CHRYSLER BIG BLOCK B/RB

Duration @ .050” IN EX

723515-12 720555-10 720555-12 723445-08 723445-10 723235-08 723235-10 723235-12 729995

Cam & Lifter Set Part No.

CL723515-12 CL720555-10 CL720555-12 CL723445-08 CL723445-10 CL723235-08 CL723235-10 CL723235-12 NA

282

2000-6000

282

2000-6200

288

2500-6300

288

2500-6400

296

2800-6600

296

2800-6600

296

2800-6600

Valve Lash IN EX

Cam Notes

304 243 251 .530 .515 109 103 Hyd. Hyd. 1,6 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

272

Lobe Separation Intake Angle Centerline

296 235 243 .530 .530 109 103 Hyd. Hyd. 1,6 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 383-440 1959-1980

1600-5600

Valve Lift w/1.50 Rockers IN EX

288 227 235 .525 .530 109 103 Hyd. Hyd. 1,6 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

Retro-Fit Hydraulic Roller Camshafts (3 Bolt) Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

278

Duration @ .050” IN EX

219

225

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.510

.500

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,6

Hyd. Hyd.

Fair idle, Street/Mild Bracket, good low to mid range. 2500+ stall, 9.5:1+ CR.

288

229

235

.520

.530

110

106

Fair idle, Street Performance/Mild Bracket. 2500+ stall, 9.5:1 CR & aftermarket intake.

288

229

235

.520

.530

112

108

Hyd. Hyd.

Mild lopey idle, Street/Mild Bracket, good low to mid range performance. 2500+ stall.

294

235

241

.545

.545

108

104

Hyd. Hyd.

Rough idle, Street/Strip, good mid-range power. Needs 3000+ stall, 9.5:1 CR & headers.

294

235

241

.545

.545

110

106

Hyd. Hyd.

Lopey idle, Street/Strip, good mid-range performance. Needs 2800+ stall, headers.

300

243

247

.600

.600

108

104

Hyd. Hyd.

Rough idle, Pro Street/Bracket, strong mid range. 10.0:1+ CR, 3000+ stall & gears.

300

243

247

.600

.600

110

106

Hyd. Hyd.

Lopey idle, Pro Street/Bracket, strong mid range. 10.0:1+ CR, 3000+ stall & gears.

300

243

247

.600

.600

112

108

Hyd. Hyd.

Fair idle, Pro Street/Bracket, strong mid range. 10.0:1+ CR, 3000+ stall & gears.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6

Cam Notes: master note list on page 260 1 6

Stock (O.E.) valve springs cannot be used. Requires 3-bolt timing Set.

154

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 155

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91767 3 91774

NA

91767 3 91774 91767 3 91774

NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25

Steel Titanium Retainers Retainers

Valve Locks

Rev Kit

91767 3 91774

NA

91767 3 91774 91767 3 91774 91767 3 91774 91767 3 91774 91767 3 91774 91767 3 91774 91767 3 91774 91767 91774

NA NA NA NA NA NA NA

NA

Valve Springs

98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 98445-K33 98445 25 --

--

Stud Girdles

Pushrods

93321 25

NA

NA

NA

NA

93065

93321 25

97110

NA

93065

93321 25

97110

NA

93065

NA NA

NA NA

NA NA

Fuel Pump Distributor Pushrod Gear

Timing Set

92152

NA

94340

92152

NA

94340

92152

NA

94340

• 383-440 1959-1980

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rocker Arms

97110

CHRYSLER BIG BLOCK B/RB Valve Spring, Retainer & Lock Kit

Valve Seals

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

97110

NA

93065

93321 25

97110

NA

93065

93321 25

97110 97110 97110 97110 97110 97110 --

NA NA NA NA NA NA --

93065 93065 93065 93065 93065 93065 --

93321 25 93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA --

Fuel Pump Distributor Pushrod Gear

Timing Set

92152

NA

94340

92152

NA

94340

92152 92152 92152 92152 92152 92152

92152

NA NA NA NA NA NA

NA

94340 94340 94340 94340 94340 94340

94330

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

155

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 156

CAMSHAFTS

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Mechanical Flat Tappet Camshafts (3 Bolt) Cam Part No.

720862-08 721262-08 722402-10 722362-08 721602-08 720152-08 722322-08 722422-08 720782-08 722412-08 720212-08 720162-08 729992

Cam & Lifter Set Part No.

CL720862-08 CL720862-08DL 4 CL721262-08 CL721262-08DL 4 CL722402-10 CL722402-10DL 4 CL722362-08 CL722362-08DL 4 CL721602-08 CL721602-08DL 4 CL720152-08 CL720152-08DL 4 CL722322-08 CL722322-08DL 4 CL722422-08 CL722422-08DL 4 CL720782-08 CL720782-08DL 4 CL722412-08 CL722412-08DL 4 CL720212-08 CL720212-08DL 4 CL720162-08 CL720162-08DL 4 NA

Duration Advertised IN EX

266

2200-5600

274

2500-5800

281

2500-6200

289

3000-6500

288

3400-7200

288

3400-7400

295

3600-7600

292

4000-7600

292

4400-7800

300

4600-7800

302

4600-8200

308

4800-8400

266

156

238

Valve Lift w/1.50 Rockers IN EX

.558

.558

Lobe Separation Intake Angle Centerline

108

274

246

246

.576

.576

108

Fair idle, super mid-range performance. Needs 11.0:1 CR-up.

287

246

252

.515

.530

Good Street Machine cam. Best with 3000+ stall.

295

254

260

.550

.555

110

108

288

260

260

.616

.616

.018

1,6,15,34

106

.022

.022

1,6

104

104

.018 .022 .018

.018 .022

260

264

.616

.620

108

104

Good throttle response, nice mid range. Needs 10.5:1+ CR, 3500+ stall.

303

260

268

.555

.574

108

Hot Street/Bracket. Needs 10.5:1+ CR, good heads & intake.

300

264

272

.620

.639

108

Pro-Street/Bracket. Needs 11.0:1+ CR, 4000+ stall.

302

264

274

.620

.643

108

Rough idle, Drag Race. Higher CR, stall speed & lower gears.

300

272

272

.639

.639

108

Lopey idle, 440+ ci Bracket cam. 4200+ stall advised.

308

274

280

.643

.659

108

Bracket Racer special. Super strong mid-range & top end.

312

280

284

.659

.667

108

104 104 104 104 104 104

.018 .022 .018 .018 .018 .018 .018

Mechanical Flat Tappet Special Order Camshaft.

Fax: 1300 350 454

1,6

1,6,15,34

.022

1,6

.018

1,6,15,34

.018

1,6,15,34

.018

1,6,15,34

.018 .018 .018

Serious Competition, Requires good heads, 12.0:1+ CR, good single plane intake.

Custom Grind Camshaft

1,6,15,34

.018

Rough idle, Hot Street/Strip, good mid range power. 10.5:1+ CR, 3500+ stall & headers.

292

Cam Notes

.018

104

108

Valve Lash IN EX

104

Rough idle, Street/Strip. Should have 10.5:1+ CR & 3500+ stall.

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires 3-bolt timing Set. Lobes designed to take maximum advantage of .904” dia. lifter.

Phone: 1300 350 351

238

Firing Order: 1•8•4•3•6•5•7•2

Hot Street/Bracket. Needs 10.0+ CR, 3200+ stall & gears.

Cam Notes: master note list on page 260 1 4 6 15

Duration @ .050” IN EX

1,6,15,34 1,6,15,34 1,6,15,34 1,6

34 Provisions for increased oiling recommended. Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 157

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91715 3 91718 4

NA

NA

91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 3 91718 4 91715 91718

NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA --

Valve Springs

98512

98512 98512 98512

Steel Titanium Retainers Retainers

98632 98632 --

NA

NA

NA

NA

93065

93321 25

97110

NA

93065

NA

97128 10 9722010 97128 10 9722010 97128 10 9722010 97128 10 9722010 97128 10 9722010 97128 10 9722010 --

--

93065 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 --

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. 10° Valve lock Angle, must use matching retainers/locks. Machining Required.

Phone: 1300 350 351

93321 25

97110

97110

Components Notes: master note list on page 260 3 4 10 25

Pushrods

93321 25

97128 10 9722010

98632

Stud Girdles

93065

98632 98632

Rocker Arms

NA

97128 10 9722010

98632

Valve Seals

97110

98632 98632

Valve Locks

Fax: 1300 350 454

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA --

Fuel Pump Distributor Pushrod Gear

Timing Set

92152

NA

94340

92152

NA

94340

92152 92152 92152 92152 92152 92152 92152 92152 92152 92152

92152

NA NA NA NA NA NA NA NA NA NA

NA

94340 94340 94340 94340 94340 94340 94340 94340 94340 94340

94330

35 10° Multi-Groove for OE style valves not available (93018 single-groove).

Web: www.fabre.com.au

157

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 158

CAMSHAFTS

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Steel Billet Mechanical Roller Camshafts (3 Bolt) Cam Part No.

Cam & Lifter Set Part No.

721313-08

NA

721203-10 722113-08 722113-12

721743-08 722133-08 722323-08 721883-08 722103-08 721293-08 722773-06 722773-08 720253-08 722793-06 722783-08 729993

NA

NA NA

NA NA NA NA NA NA NA NA NA NA NA

NA

Duration Advertised IN EX

269

2400-6000

277

2800-6200

277

2800-6300

277

2800-6300

285

3000-6400

289

3000-6700

291

3200-6800

295

3600-7000

295

3600-7200

303

3800-7400

307

4000-7600

307

4000-7600

313

4200-7800

315

4600-8200

315

4600-8000

269

Duration @ .050” IN EX

237

237

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

.555

.555

Lobe Separation Intake Angle Centerline

110

106

Valve Lash IN EX

.022

.022

Fair idle, Street/Strip, strong useable low end torque. 10.5:1, 3500+ stall suggested.

277

245

245

.585

.585

108

104

.022

.022

Hot Street/Strip, excellent mid range torque. Needs 3500+ stall, good exhaust, 800+ cfm.

285

245

253

.600

.600

108

104

.022

.022

Lopey idle, Hot Street/Strip, Serious mid range performance. 3200+ stall, 10.0:1 CR.

285

245

253

.600

.600

112

108

.022

.022

Fair idle, Hot Street/Strip, Serious mid range performance. 3200+ stall, 10.0:1 CR.

291

253

259

.600

.585

108

104

Rough idle, Hot Street/Bracket. Strong mid-range horsepower.

299

257

267

.600

.600

108

104

.022 .022

Good Bracket cam. Good mid range torque. Needs 3500+ stall & good intake.

295

259

263

.640

.640

108

104

.022

.022 .022 .022

Rough idle, Pro Street/Bracket, strong mid range. 11.0:1+ CR, 3500+ stall & good intake.

301

263

269

.675

.650

108

104

.022

Rough idle, Bracket/Super Street, light to mid weight car. 4500+ stall, 11.5:1 CR.

307

263

275

.640

.630

108

104

Strong mid & upper end torque & horsepower. Needs 12.5:1 CR-up.

307

271

275

.625

.630

108

104

Good mid to upper end power. Needs 12.0:1+ CR, 4500+ stall.

307

275

275

.630

.630

106

102

440 CID. Bracket special. Strong mid-range. 12.0:1+ CR, 4500+ stall.

307

275

275

.630

.630

108

104

.022 .022 .022 .022

Super Gas/Super Street in 383ci. Strong mid-range. 12.5:1+ CR, 4500+ stall.

315

281

283

.675

.645

108

104

Super Gas/Super Comp. Needs 4500+ stall, 12.5:1+ CR., good intake.

315

283

283

.645

.645

11:1+ upper mid-range & top end power. 440+CID.

315

283

283

.675

.675

11:1+ upper mid-range & top end power. 440+CID.

Custom Grind Camshaft

106 108

Mechanical Roller Special Order Camshaft.

102 104

.022 .022 .022

.022 .022 .022 .022 .022 .022 .022 .022

Cam Notes

1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6 1,5,6

Cam Notes: master note list on page 260 1 5 6

158

Stock (O.E.) valve springs cannot be used. Requires upgraded distributor gear/fuel pump pushrod. Requires 3-bolt timing Set.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 159

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER BIG BLOCK B/RB

• 383-440 1959-1980

Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91751 91727 32

NA

NA

91751 91727 32 91751 91727 32 91751 91727 32 91751 91727 32 91727 91735 91727 91735 91735 91798 91735 91798 91735 91798 91735 91798 91735 91798 91735 91798 91735 91798 91735 91798 --

NA NA NA NA NA

NA NA NA NA NA NA NA NA NA

NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93321 25

NA

NA

NA

NA

98630 25 97128 10 9722010

NA 35

93321 25

NA

98630 25 97128 10 9722010

NA 35

93321 25

NA NA NA

NA NA NA NA NA NA NA NA NA --

98630 25 97128 10 9722010 98630 25 97128 10 9722010 98630 25 97128 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 98543 25 97130 10 9722010 --

--

--

NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 NA 35 --

93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 93321 25 --

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA --

Fuel Pump Distributor Pushrod Gear

Timing Set

92153

94420

94340

92153

94420

94340

92153 92153 92153 92153 92153 92153 92153 92153 92153 92153 92153 92153 92153

92153

94420 94420 94420 94420 94420 94420 94420 94420 94420 94420 94420 94420 94420

94420

94340 94340 94340 94340 94340 94340 94340 94340 94340 94340 94340 94340 94340

94330

Components Notes: master note list on page 260 10 25 32 35

10° Valve lock Angle, must use matching retainers/locks. Machining Required. These lifters are not recommended for street use. 10° Multi-Groove for OE style valves not available (93018 single-groove).

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

159

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 160

CAMSHAFTS

CHRYSLER HEMI

• 5.7L-6.1L 2003-2010 (WITHOUT VARIABLE CAM TIMING)

Hydraulic Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

786155-14

NA

786845-14

NA

786875-12

NA

786045-14

NA

786965-13

NA

789995

NA

CHRYSLER HEMI

Duration Advertised IN EX

264

1000-5000

266

1200-5200

269

1600-5600

277

2200-6200

281

2400-6400

769991

NA

272

213

769992

219

NA

.520

.520

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

.575

.575

114

110

277

219

227

.600

.575

112

108

Hyd. Hyd.

Hot Street, Best in 6.1L with modified heads. Very nice low to mid range.

283

227

233

.600

.600

114

110

Hyd. Hyd.

Hot Street, Strong mid range. Needs better exhaust. Best with modified heads.

287

231

237

.626

.600

113

109

Hyd. Hyd.

Hot Street, A favorite in 426 stroker combinations. Awesome power band. Hydraulic Roller Tappet Special Order Camshaft.

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Hydraulic Flat Tappet Special Order Camshaft.

• 331-354 1951-1956

Cam & Lifter Set Part No.

Valve Lift w/1.70 Rockers IN EX

Street Performance, Best in 6.1L. Great all-around torque & horsepower.

Mechanical Flat Tappet Camshafts Cam Part No.

215

• 331-354 1951-1956

Cam & Lifter Set Part No.

CHRYSLER HEMI

211

Firing Order: 1•8•4•3•6•5•7•2

Street Performance, Designed for 5.7L with MDS. Nice low to mid range performance.

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts Cam Part No.

268

Duration @ .050” IN EX

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Lobe Separation Intake Angle Centerline

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Mechanical Flat Tappet Special Order Camshaft.

Lobe Separation Intake Angle Centerline

1

1,12

1,12,21 1,12,21 1,12

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

1

1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 12 Requires custom programmer/tuning. 21 Requires custom programmer/tuning.

160

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 161

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER HEMI

• 5.7L-6.1L 2003-2010 (WITHOUT VARIABLE CAM TIMING)

Hydraulic Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

NA

NA

NA

NA NA NA NA NA

NA

NA

NA

NA

NA

CHRYSLER HEMI

NA

NA

NA

NA

98110

--

NA NA

98110

NA

NA

98110

98110

Steel Titanium Retainers Retainers

98110

NA

NA

Valve Springs

NA

--

--

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

95081

NA

NA

NA

NA

NA

NA

NA

--

--

91731

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

CHRYSLER HEMI

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

91725-16

Rev Kit

NA

NA NA

NA NA NA

NA NA NA NA

95081 95081 95081 95081 --

NA

NA

94332

NA

NA

94332

NA NA NA

NA

NA NA NA

--

NA

NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

94332 94332 94332

94332

--

NA

NA

--

NA

NA

Timing Set

94330

• 331-354 1951-1956

Mechanical Flat Tappet Camshaft Components Lifters

NA

NA

Timing Set

• 331-354 1951-1956

Hydraulic Flat Tappet Camshaft Components Lifters

NA

Fuel Pump Distributor Pushrod Gear

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

--

NA

NA

--

NA

NA

Timing Set

94330

Components Notes: master note list on page 260

161

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 162

CAMSHAFTS

CHRYSLER HEMI

• 392 1957-1958

Hydraulic Flat Tappet Camshafts Cam Part No.

737511-10

731231-08 731141-10

730991-10 730831-10 739991

Cam & Lifter Set Part No.

CL737511-10

252

800-4800

CL731231-08

257

1000-5000

CL731141-10

267

1600-5400

CL730991-10

275

1800-5600

CL730831-10

289

2600-6000

NA

CHRYSLER HEMI

739995

206

NA

257

210

739992

210

NA

.475

.479

.483

Lobe Separation Intake Angle Centerline

110

.483

267

220

220

.506

.506

108

Fair idle, Strong mid-range power. Needs headers.

275

221

221

.470

.470

Fair idle, Strong mid-range power. Needs headers.

289

242

242

.562

.562

110 110 110

Valve Lash IN EX

Cam Notes

104

Hyd. Hyd.

1,15

106

Hyd. Hyd.

106 106 106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip. Nice mid range power. 10.5:1 CR, headers, good intake. Hydraulic Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Duration Advertised IN EX

Custom Grind Camshaft

Duration @ .050” IN EX

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift w/1.50 Rockers IN EX

Lobe Separation Intake Angle Centerline

Hydraulic Roller Tappet Special Order Camshaft.

• 392 1957-1958

Cam & Lifter Set Part No.

Valve Lift w/1.50 Rockers IN EX

Good idle, Super low & mid-range performance.

Mechanical Flat Tappet Camshafts Cam Part No.

208

Firing Order: 1•8•4•3•6•5•7•2

Good idle, Strong low end torque & power.

• 392 1957-1958

Cam & Lifter Set Part No.

CHRYSLER HEMI

255

Duration @ .050” IN EX

Custom Grind Camshaft

Hydraulic Roller Camshafts Cam Part No.

Duration Advertised IN EX

Valve Lift w/1.50 Rockers IN EX

Mechanical Flat Tappet Special Order Camshaft.

Lobe Separation Intake Angle Centerline

1,15 1,15 1,15 1

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

1,15

Hyd. Hyd.

1

1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

162

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 163

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER HEMI

• 392 1957-1958

Hydraulic Flat Tappet Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91731 3

NA

NA

91731 3

91731 3 91731 3 91731 3 91731 3

NA

NA

NA

NA

NA

CHRYSLER HEMI

NA

NA

NA

NA

NA

--

NA NA

NA

NA

NA

NA

NA

Steel Titanium Retainers Retainers

NA

NA

NA

Valve Springs

NA

--

--

NA

91767 91774

Rev Kit

NA

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

--

--

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

91725-16

Rev Kit

NA

NA NA NA --

NA NA NA NA

NA

NA NA NA NA

NA

NA NA NA NA --

Timing Set

NA

NA

94330

NA

NA

94330

NA NA NA NA

NA NA NA NA

94330 94330 94330

94330

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

--

NA

NA

--

NA

NA

Timing Set

94330

• 392 1957-1958

Mechanical Flat Tappet Camshaft Components Lifters

NA

Fuel Pump Distributor Pushrod Gear

• 392 1957-1958

Valve Spring, Retainer & Lock Kit

CHRYSLER HEMI

Valve Seals

NA

Hydraulic Roller Camshaft Components Lifters

Valve Locks

Valve Spring, Retainer & Lock Kit

--

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

--

NA

NA

--

NA

NA

Timing Set

94330

Components Notes: master note list on page 260 3

Included in Cam & Lifter Sets.

163

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 164

CAMSHAFTS

CHRYSLER HEMI

• 392 1957-1958

Steel Billet Mechanical Roller Camshafts Cam Part No.

739993

Cam & Lifter Set Part No.

NA

CHRYSLER HEMI

748291-10 740001-10 740841-08 743471-08 749641-08 742401-08 749991

Duration Advertised IN EX

Duration @ .050” IN EX

CL748291-10 CL740001-10 CL740841-08 CL743471-08 CL749641-08 CL742401-08 NA

277

2200-5800

285

2000-5200

291

2400-5800

285

2500-5800

295

3000-6400

303

3000-6200

277

230

740743-08

NA

740223-10 729319-16 749993 729999

230

NA

285

231

231

291

NA

NA NA

313

4800-8200

327

6000-9600

Valve Lift Lobe w/1.57/1.52 Rockers Separation Intake IN EX Angle Centerline

.556

.538

.502

.486

237

237

.529

.512

285

238

238

.580

.562

Lopey idle. Pro-Street & Bracket Racing profile.

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

110 110

106 106

Hyd. Hyd.

295

248

248

.604

.585

108

104

Hyd. Hyd.

108

104

Hyd. Hyd.

108

104

Hyd. Hyd.

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall.

1

1,15

303

249

249

.534

.517

108

104

Hyd. Hyd.

1

1,15 1,15 1

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall. Hydraulic Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

303

Valve Lash IN EX

Firing Order: 1•8•4•3•6•5•7•2

Lopey idle. Pro-Street & Bracket Racing profile.

Custom Grind Camshaft

4200-7800

Lobe Separation Intake Angle Centerline

Fair idle, Lower lift version of 740001-10, best with headers, gears & 2500+ stall.

Steel Billet Mechanical Roller Camshafts Cam & Lifter Set Part No.

Valve Lift w/1.50 Rockers IN EX

Fair idle, Street machines with headers, gears & 2500+ stall.

• 426 1966-1971

Cam Part No.

Firing Order: 1•8•4•3•6•5•7•2

Mechanical Roller Special Order Camshaft.

• 426 1966-1971

Cam & Lifter Set Part No.

CHRYSLER HEMI

Duration @ .050” IN EX

Custom Grind Camshaft

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration Advertised IN EX

303

Duration @ .050” IN EX

271

271

Hyd. Hyd.

Firing Order: 1•8•4•3•6•5•7•2

Valve Lift Lobe w/1.57/1.52 Rockers Separation Intake IN EX Angle Centerline

.654

.633

110

106

Valve Lash IN EX

.022

Strong Bracket in full body car. Best with single 4bbl., 12.0:1+ CR, 4000+ stall.

313

281

281

.764

.740

108

104

.022

.022

.022

Rough idle, Bracket & Quick 16, Altered/Dragster. Needs good heads, 12.5:1 CR.

327

295

295

.749

.725

116

112

.022

Blown Alcohol or Pro Mod 500+ ci., with high boost. 2.125” 48° bank angle.

Custom Grind Camshaft

Mechanical Roller Special Order Camshaft.

Custom Grind Camshaft, Aftermarket Block

2.125” Journal 9310 Mechanical Roller Special Order Camshaft.

.022

1

Cam Notes

1,5 1,5 1,5 1,5 1,5

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 5 Requires upgraded distributor gear/fuel pump pushrod. 15 Lobes designed to take maximum advantage of .904” dia. lifter.

164

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 165

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

CHRYSLER HEMI

• 392 1957-1958

Steel Billet Mechanical Roller Camshaft Components Lifters

--

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

--

CHRYSLER HEMI

Valve Springs

--

Steel Titanium Retainers Retainers

--

--

Valve Locks

--

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91711 3 91712

NA

NA

91711 3 91712 91711 3 91712 91711 3 91712 91711 3 91712 91711 91712

NA

NA

NA

NA

NA

97128 10 97216 10 93070 10

98445

--

CHRYSLER HEMI

98445

98445

98445

NA

NA

Steel Titanium Retainers Retainers

98445

NA

NA

Valve Springs

98445

NA

NA

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

--

--

Valve Locks

97128 10 97216 10 93070 10 97128 10 97216 10 93070 10 97128 10 97216 10 93070 10 97128 10 97216 10 93070 10 97128 10 97216 10 93070 10 --

--

--

NA NA NA NA NA NA

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91798

NA

NA

91744 --

--

NA

Valve Springs

NA

98738-A 25

NA

NA

98048 25 98049 25

NA

--

NA

NA

--

NA

NA

94330

NA NA NA NA NA

NA NA NA NA NA

NA NA NA NA NA

NA

NA

NA

Timing Set

92152

NA

94340

92152

NA

94340

92152 92152 92152 92152

92152

NA NA NA NA

NA

94340 94340 94340 94340

94340

• 426 1966-1971

Steel Billet Mechanical Roller Camshaft Components 91735 91798

NA

Timing Set

• 426 1966-1971

Hydraulic Flat Tappet Camshaft Components 91711 3 91712

Valve Seals

--

Steel Titanium Retainers Retainers

98048 25 98049 25 --

--

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

93075

NA

NA

NA

NA

NA

97222

93075

NA

97224

93075

NA --

97224

--

--

--

--

--

NA NA

NA

NA

NA NA

NA

NA

NA NA

NA

NA

NA NA

NA

NA

Fuel Pump Distributor Pushrod Gear

Timing Set

92153

94420

94340

92153

94420

94340

92153 92152

92152

94420 NA

NA

94340 94340

94340

Components Notes: master note list on page 260

3 Included in Cam & Lifter Sets. 10 10° Valve lock Angle, must use matching retainers/locks. 25 Machining Required.

Phone: 1300 350 351

Fax: 1300 350 454

165

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 166

CAMSHAFTS

FORD STRAIGHT 6

• 140-250 1963-1983 (7.808” DECK)

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

280108-12

Cam & Lifter Set Part No.

CL280108-12

FORD STRAIGHT 6

259

600-4500

280028-08 280938-10 280998-10 289998

Cam & Lifter Set Part No.

CL280028-08 CL280938-10 CL280998-10 NA

FORD STRAIGHT 6

269

Duration @ .050” IN EX

205

215

Duration Advertised IN EX

263

1200-4800

267

1600-5000

275

2000-5600

263

Duration @ .050” IN EX

209

209

280106-12

CAMSHAFTS

CL280106-12

267

213

275

FORD STRAIGHT 6

213

221

221

Cam Part No.

280026-08 280936-10 280996-10 289996

269

Duration @ .050” IN EX

Cam & Lifter Set Part No.

CL280026-08

CL280936-10 CL280996-10 NA

Duration Advertised IN EX

263

1200-4800

267

1600-5000

275

2000-5800

108

Valve Lash IN EX

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.50 Rockers IN EX

.420

.420

Lobe Separation Intake Angle Centerline

.450

.450

.470

.470

108

104

Hyd. Hyd.

110

106

Hyd. Hyd.

110

106

205

215

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.60 Rockers IN EX

.448

.475

Lobe Separation Intake Angle Centerline

112

108

263

Duration @ .050” IN EX

209

209

Firing Order: 1•5•3•6•2•4

Valve Lift w/1.60 Rockers IN EX

.448

.448

Lobe Separation Intake Angle Centerline

Good idle, Street, Off-Road, Towing. Good torque.

267

213

213

.480

.480

Strong low & mid-range torque & horsepower.

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

275

221

221

.501

.501

108

104

Hyd. Hyd.

110

106

Hyd. Hyd.

110

106

Nice idle, good low & mid range horsepower. Needs good exhaust.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

1

Valve Lash IN EX

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

• 240-300 1964-1996 (10.0” DECK)

Hydraulic Flat Tappet Camshafts

112

Hydraulic Flat Tappet Special Order Camshaft.

Duration Advertised IN EX

259

.445

Nice idle, good low & mid range horsepower. Needs good exhaust.

Custom Grind Camshaft

600-4500

.420

Lobe Separation Intake Angle Centerline

Strong low & mid-range torque & horsepower.

• 240-300 1964-1996 (10.0” DECK)

Cam & Lifter Set Part No.

Valve Lift w/1.50 Rockers IN EX

Good idle, Street, Off-Road, Towing. Good torque.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•5•3•6•2•4

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

• 140-250 1963-1983 (7.808” DECK)

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration Advertised IN EX

1

1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

166

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 167

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD STRAIGHT 6

• 140-250 1963-1983 (7.808” DECK)

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

91251-12 3

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

NA

FORD STRAIGHT 6

Valve Springs

Steel Titanium Retainers Retainers

98341-12 97118-12

NA

Valve Locks

93040

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91251-12 3

NA

NA

91251-12 3 91251-12

NA NA

NA

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

NA

NA

93316 25

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98341-12 97118-12

NA

93040-12 93316 25

NA

98341-12 97118-12

NA

93040-12 93316 25

98341-12 97118-12

--

--

FORD STRAIGHT 6

NA

--

NA

93040-12 93316 25

--

--

--

NA NA

NA

91211-12 3 91212-12

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

NA

FORD STRAIGHT 6

Valve Springs

Steel Titanium Retainers Retainers

98411-12 97118-12

NA

Valve Locks

93040

Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91211-12 3 91212-12

NA

NA

91211-12 3 91212-12 91211-12 91212-12

NA NA

NA

NA

NA

NA

NA NA

NA

NA NA --

NA

NA

NA

NA

NA NA

NA NA

NA NA NA

NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

Fuel Pump Distributor Pushrod Gear

Timing Set

93316 25

NA

NA

NA

93316 25

NA

NA

NA

NA

NA

NA

• 240-300 1964-1996 (10.0” DECK)

Hydraulic Flat Tappet Camshaft Components 91211-12 3 91212-12

NA

• 240-300 1964-1996 (10.0” DECK)

Street Force™ Hydraulic Flat Tappet Camshaft Components Lifters

NA

• 140-250 1963-1983 (7.808” DECK)

Hydraulic Flat Tappet Camshaft Components 91251-12 3

Valve Seals

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

NA

98411-12 97118-12

NA

93040

93316 25

NA

98411-12 97118-12

NA

93040

93316 25

98411-12 97118-12

--

--

--

NA --

93040 --

--

NA NA

NA

NA NA

NA

NA NA --

NA

NA

NA

NA

NA NA

NA NA

NA NA NA

NA

Components Notes: master note list on page 260 3 Included in Cam & Lifter Sets. 25 Machining Required.

167

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 168

FORD MODULAR V8

• 4.6L-5.4L SOHC 2-VALVE 1991-2005 WITH PERF. IMPROVEMENT HEADS

Hydraulic Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

276823-14

NA

276063-16 276363-16 276393-14 276623-14 276263-13 276203-14 276883-14 276733-14 279993

NA

260

800-4800

265

1200-5200

NA

273

1500-5500

NA

275

1600-5600

NA

275

1800-6600

NA

277

2000-6200

NA

278

2000-6600

NA

283

2200-6800

NA

288

2400-7000

NA

CAMSHAFTS

FORD MODULAR V8

Cam & Lifter Set Part No.

276584-14

NA

276074-14 276814-14 279994

220

224

NA NA NA NA

NA

259

1200-6600

265

1500-6800

265

1800-7000

274

2000-7000

Valve Lift w/1.825 Rockers IN EX

.548

.548

Lobe Separation Intake Angle Centerline

116

112

268

224

228

.548

.548

114

110

Valve Lash IN EX

Hyd. Hyd. Hyd. Hyd.

Street performance, Increase in low to mid range torque and more power.

280

232

240

.548

.548

116

112

Hyd. Hyd.

Street/Strip with supercharger. Need good parts all around. 2500+ Stall.

275

234

234

.548

.548

114

110

Hyd. Hyd.

High Performance Street, good low to mid range torque. Needs 1800+ stall & gears.

278

234

236

.593

.593

114

110

Hyd. Hyd.

Nice idle, Hot Street, nice increase in mid range performance. Needs 2000+ stall & gears.

280

236

240

.548

.548

113

109

Hyd. Hyd.

Fair idle, Street/Strip, Nice mid range. 2200+ stall, better intake & exhaust.

283

238

242

.593

.593

114

110

Hyd. Hyd.

Fair idle, Street/Strip, Good mid range. 2200+ stall, better intake & exhaust.

288

242

246

.593

.593

114

110

Hyd. Hyd.

Rough idle Hot Street/Strip, Needs better intake, exhaust, 2500+ stall & gears.

288

246

246

.593

.593

114

110

Hyd. Hyd.

Rough idle Pro Street/Brackets, Needs better intake, exhaust, 2800+ stall & gears. Hydraulic Roller Special Order Camshaft.

Duration Advertised IN EX

247

800-6400

Firing Order: 1•3•7•2•6•5•4•8

Everyday Street, good all around performance with increase in power.

• 4.6L DOHC 4-VALVE 1993-PRESENT

Cam Part No.

276414-14

265

Duration @ .050” IN EX

Custom Grind Camshaft

Hydraulic Roller Camshafts 276244-14

Duration Advertised IN EX

254

Duration @ .050” IN EX

210

216

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.825 Rockers IN EX

.450

.450

Lobe Separation Intake Angle Centerline

114

Smooth idle, High low end torque. Can use stock converter.

259

222

222

.450

.450

114

112 112

Mild idle, Street Performance, Excellent low to mid range torque.

265

228

228

Hyd. Hyd.

.475

.475

114

112

Valve Lash IN EX

236

234

.475

.475

114

112

236

242

.475

.475

114

112

Hydraulic Roller Special Order Camshaft.

1,8,12 1,8,12 1,8,12 1,8,12 1,8,12 1,8,12 1,8,12 1,8,12

Cam Notes

Hyd. Hyd.

1,9,12

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Pro Street/Strip with supercharger. Need good parts all around. 2500+ Stall.

Custom Grind Camshaft

1,8,12

1,9,12

Rough idle, Street/Strip. Needs 2400+ stall, larger throttle body & better exhaust.

281

1,8,12

Hyd. Hyd.

Lopey idle, Hot Street, Strong mid range with top end increase. 2000+ stall & gears.

270

Cam Notes

Hyd. Hyd.

1,9,12 1,9,12 1,9,12 1,9,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 8 Includes 2 camshafts. 12 Requires custom programmer/tuning.

168

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 169

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD MODULAR V8

• 4.6L-5.4L SOHC 2-VALVE 1991-2005 WITH PERF. IMPROVEMENT HEADS

Hydraulic Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

NA

NA

NA

NA NA NA NA NA NA NA NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA

NA

NA

Valve Springs

NA

NA

NA

FORD MODULAR V8

Steel Titanium Retainers Retainers

NA

NA

NA

NA

NA NA NA NA NA NA NA NA

NA

Lifters

Rev Kit

NA

NA

NA

NA NA NA NA NA

NA NA NA NA NA

NA NA NA NA NA

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

NA

NA NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA

Timing Set

NA NA NA NA NA NA NA NA NA NA

• 4.6L DOHC 4-VALVE 1993-PRESENT

Hydraulic Roller Camshaft Components Valve Spring, Retainer & Lock Kit

Valve Locks

Valve Springs

98105

98105 98105 98105 98105 --

Steel Titanium Retainers Retainers

NA

NA

NA

NA

NA NA NA

NA

NA NA NA

NA

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

NA

NA NA NA NA

NA

NA NA NA NA

NA

NA NA NA NA

NA

NA NA NA NA

NA

NA NA NA NA

NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA

NA

NA NA NA

NA

Timing Set

NA NA NA NA NA

NA

169

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 170

FORD MODULAR V8

• 4.6L-5.4L SOHC 3-VALVE 1995-PRESENT

Hydraulic Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

276095-14

NA

276745-14 276935-14 276175-14 276855-14 276475-15 279995

NA NA NA NA NA

NA

Duration Advertised IN EX

269

2200-5400

269

2200-5600

273

2400-5800

273

2400-5800

275

2500-6000

275

2500-6200

282

Duration @ .050” IN EX

216

228

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.825 Rockers IN EX

.450

.450

Lobe Separation Intake Angle Centerline

114

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,8,12

100

Hyd. Hyd.

100

Hyd. Hyd.

Street Performance. Good power gains over stock. Good mid range torque.

285

216

232

.475

.475

114

Hot Street, Great mid range torque. Supercharger/NOS OK.

289

220

236

.450

.450

114

100

High Performance Street, good power gains above 4500 rpm. Best with 2500+ stall.

289

220

236

.475

.475

114

100

Hyd. Hyd.

High Performance Street, good power gains above 4500 rpm. Best with 2500+ stall.

289

222

236

.490

.490

114

100

Hyd. Hyd.

Mild idle, Hot Street, good all around performance with power gains over 4800 rpm.

301

222

248

.475

.475

115

101

Street/Strip, good mid to top end power. 2500+ stall recommended.

Custom Grind Camshaft

Hydraulic Roller Special Order Camshaft.

Hyd. Hyd.

Hyd. Hyd.

8,12 8,12

1,8,12 1,8,12 1,8,12 1,8,12

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 8 Includes 2 camshafts. 12 Requires custom programmer/tuning.

170

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 171

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD MODULAR V8

• 4.6L-5.4L SOHC 3-VALVE 1995-PRESENT

Hydraulic Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

NA

NA

NA

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA

Valve Springs

NA

NA

Steel Titanium Retainers Retainers

NA NA NA NA NA

NA

NA

NA

NA

NA NA NA NA NA

NA NA NA NA NA

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

NA

NA

NA

NA

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA

NA NA NA NA NA NA

Fuel Pump Distributor Pushrod Gear

NA

NA

NA

NA

NA NA NA NA NA

NA NA NA NA NA

Timing Set

NA NA NA NA NA NA NA

Components Notes: master note list on page 260

171

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 172

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC210031-12

MC210031-12DL 4

MC210021-12 MC210931-10 MC210951-10 MC210041-12 MC210961-08

MC210021-12DL 4 MC210931-10DL 4 MC210951-10DL 4 MC210041-12DL 4 MC210961-08DL 4

FORD SMALL BLOCK

Duration Advertised IN EX

259

1000-4500

267

1500-5400

269

1500-5200

275

2000-6000

279

2500-6200

285

2600-6300

267

Duration @ .050” IN EX

205

215

217751-08 217311-09

217081-13

CL217751-08

277

CL217311-09

CL217081-13

FORD SMALL BLOCK

270

800-4300

288

1600-5200

213

223

269

215

215

285

221

231

210021-12 210031-12

CL210021-12

285

CL210031-12

259 269

1500-5400

112

.475

.475

110

.501

.501

110

225

231

.496

.512

112

285

231

231

.501

.501

108

Broad power range, extra performance in smaller engine.

252

Duration @ .050” IN EX

187

187

298

184

189

218

218

267

205

215

Hyd. Hyd.

1

106

Hyd. Hyd.

108 106 108

104

Valve Lift w/1.60 Rockers IN EX

.381

.381

Lobe Separation Intake Angle Centerline

108

103

.368

.381

109

104

.461

.461

113

107

.448

.480

Lobe Separation Intake Angle Centerline

112

108

215

223

.475

.496

112

108

1 1

Hyd. Hyd.

Valve Lash IN EX

Hyd. Hyd.

1

Cam Notes

Hyd. Hyd.

Hyd. Hyd.

1

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

277

1

Hyd. Hyd.

Firing Order: 1•5•4•2•6•3•7•8

Valve Lift w/1.60 Rockers IN EX

1

Hyd. Hyd.

Firing Order: 1•5•4•2•6•3•7•8

Near duplicate of the Ford Cobra Kit cam (FMC #C9OZ-6250-C).

Duration @ .050” IN EX

Cam Notes

Hyd. Hyd.

Near duplicate of the Ford 230HP/302 cam (FMC #C3AZ-6250-V).

288

Valve Lash IN EX

108

Near duplicate of the Ford 210HP/289 cam (FMC #C3OZ-6250-B).

Duration Advertised IN EX

1000-4500

.496

Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

.475

Street & Strip. Needs 4 barrel, headers & low gears.

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

112

Strong low & mid-range, fuel efficiency & driveability.

Duration Advertised IN EX

252

800-4200

.480

Broad power band. Excellent in Hot Street & Marine.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

.448

Lobe Separation Intake Angle Centerline

Great low & mid-range. Smooth idle. Good in PUs & RVs.

American Muscle™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift a/1.60 Rockers IN EX

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

1

Cam Notes: master note list on page 260 1 4

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets.

172

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 173

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91211 3 91216 4

NA

98412-K11

91211 3 91216 4 91211 3 91216 4 91211 3 91216 4 91211 3 91216 4 91211 3 91216 4

NA NA NA NA NA

98412-K11 98412-K11 98412-K11 98412-K11 98412-K11

FORD SMALL BLOCK

Valve Springs

98412

98412 98412 98412 98412 98412

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95198 95007

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118 97118 97118 97118

-93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007

Lifters

Rev Kit

91211 3 91216 4

NA

98412-K11

91211 3 91216 4 91211 3 91216 4

NA NA

98412-K11 98412-K11

FORD SMALL BLOCK

Valve Springs

98412

98412 98412

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95198 95007

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

95198 95007 95198 95007

Lifters

Rev Kit

91211 3 91216 4

NA

98412-K11

91211 3 91216 4

NA

98412-K11

Valve Springs

98412

98412

Steel Titanium Retainers Retainers

97118 97118

Valve Locks

-93005 93316 25 97216 10 93017 10

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks.

Phone: 1300 350 351

Valve Seals

-93005 93316 25 97216 10 93017 10

Components Notes: master note list on page 260 3 4 7 10

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA

94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Street Force™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Timing Set

• 221-302 1963-1995 (EXCEPT 302 H.O.)

American Muscle™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Fax: 1300 350 454

Rocker Arms

90080 90081 7 90080 90081 7

Stud Girdles

Pushrods

90200 90201 7

95198 95007

90200 90201 7

95198 95007

Fuel Pump Distributor Pushrod Gear

NA NA

94427 94427

Timing Set

94210 19 94310 19 94210 19 94310 19

19 Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312. 25 Machining Required.

Web: www.fabre.com.au

173

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 174

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

218021-09 218061-09 218101-09

Cam & Lifter Set Part No.

CL218021-09 CL218061-09 CL218101-09

FORD SMALL BLOCK

Duration Advertised IN EX

281

1800-5600

289

2000-5900

297

2400-6400

212001-14 212161-11 211031-11

210931-10 210991-08 212021-08 210951-10 212431-06 212431-08 212431-12 210941-10 210041-08 210041-12 212141-08 212141-10

Cam & Lifter Set Part No.

CL212001-14 CL212161-11 CL211031-11

CL210931-10 CL210991-08 CL212021-08 CL210951-10 CL212431-06 CL212431-08 CL212431-12

CL210941-10 CL210041-08 CL210041-12 CL212141-08 CL212141-10

263

800-4400

267

1200-4700

269

1500-5200

267

1700-5700

267

1600-5800

275

2000-6000

272

2500-6400

272

2400-6600

272

2400-6600

279

2400-5700

279

2000-6400

279

2500-6200

277

2600-6500

277

2600-6600

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

297 235 243 .501 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .512 .528 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

255

600-4800

Firing Order: 1•5•4•2•6•3•7•8

289 227 235 .501 .501 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Hydraulic Flat Tappet Camshafts Cam Part No.

Duration @ .050” IN EX

261

Duration @ .050” IN EX

201

207

Firing Order: 1•5•4•2•6•3•7•8

Valve Lift w/1.60 Rockers IN EX

.437

.448

Lobe Separation Intake Angle Centerline

114

110

Smooth idle, stong low end. High vacuum, good fuel economy.

263

209

209

.448

.448

111

267

213

213

.459

.459

111

Hyd. Hyd.

106

Hyd. Hyd.

107

269

215

215

.475

.475

110

Strong low & mid-range, fuel efficiency & driveability.

267

220

220

.543

.543

108

277

220

230

.543

.563

108

285

221

231

.501

.501

110

Street & Strip. Needs 4 barrel, headers & low gears.

272

224

224

.551

.551

106

Lopey idle, good low end & mid-range horsepower & torque.

272

224

224

.551

.551

108

Hot Street cam. 4 barrel & headers recommended.

272

224

224

.551

.551

112

1

104

Hyd. Hyd.

1,16

106

Hyd. Hyd.

1

104

279

225

225

.496

.496

110

285

225

231

.496

.512

108

285

225

231

.496

.512

112

282

230

234

.563

.572

108

Lopey idle, broad power band, strong top end power.

282

230

234

.563

.572

110

1,16

Hyd. Hyd.

1,16

108

Hyd. Hyd.

1,16

104

106

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

104

Hyd. Hyd.

Hot Street performance in 385-418. 9.5:1, 2400 stall suggested. Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

Hyd. Hyd.

1

102

Good idle, good mid range torque & horsepower. Needs 2400+ stall. Needs good intake, 4bbl. & headers. Best with 9.5+ CR.

Cam Notes

Hyd. Hyd.

Good low & mid-range horsepower. Needs 4 barrel & headers. High lift, dual pattern. Need 4 barrel, low gears & 2500+ stall.

Hyd. Hyd.

107

Smooth idle, strong low end. High vacuum, good fuel economy. Good idle, Street, Off-Road, Towing. Good fuel efficiency.

Valve Lash IN EX

107 106

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

Hyd. Hyd. Hyd. Hyd.

1,16 1 1 1

1,16 1,16

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 16 Lobes designed to take maximum advantage of .875” dia. lifter.

174

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 175

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91211 3 91212

NA

98412-K11

91211 3 91212 91211 3 91212

NA NA

98412-K11 98412-K11

FORD SMALL BLOCK

Valve Springs

98412

98412 98412

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Lifters

Rev Kit

91211 3 91212

NA

98412-K11

91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212

NA NA NA NA NA NA

98412-K11 98412-K11 98412-K11

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

Valve Springs

98412

98412 98412 98412

Steel Titanium Retainers Retainers

Valve Seals

98412

NA NA

90200 90201 7

95198 95007

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118 97118

-93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10

97118

-93005 93316 25 97216 10 93017 10

98412-K11

98412

97118

-93005 93316 25 97216 10 93017 10

98412-K11

98412

97118

-93005 93316 25 97216 10 93017 10

97118

-93005 93316 25 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Pushrods

90080 90081 7

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

95198 95007

Stud Girdles

-93005 93316 25 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

98412

Rocker Arms

97118

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

98412-K11

90080 90081 7

95198 95007

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 221-302 1963-1995 (EXCEPT 302 H.O.)

NA NA

95198 95007

90200 90201 7

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

90200 90201 7

90080 90081 7

NA NA

Pushrods

-93005 93316 25 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 98412-K11

Stud Girdles

97118

Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Rocker Arms

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

175

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 176

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Hydraulic Flat Tappet Camshafts Cam Part No.

212591-08 212591-12 210961-08 210051-08 210051-10 211701-08 211701-12

212601-06 212601-08 210971-08 210891-08 210891-10 210891-12 210061-08 210061-12 212041-08 212401-10 211541-08 211541-10 219991

Cam & Lifter Set Part No.

CL212591-08 CL212591-12 CL210961-08 CL210051-08 CL210051-10 CL211701-08 CL211701-12

CL212601-06 CL212601-08 CL210971-08 CL210891-08 CL210891-10 CL210891-12 CL210061-08 CL210061-12 CL212041-08 CL212401-10 CL211541-08 CL211541-10 NA

Duration Advertised IN EX

277

2800-6200

277

2800-6400

285

2600-6300

285

3000-6500

285

3000-6600

282

3000-6800

282

3000-6000

282

3000-6400

282

3000-6400

283

3000-6600

287

3000-6600

287

3000-6600

287

2800-6400

291

3000-6600

291

3000-6600

293

3200-6800

295

3200-6800

295

3400-7000

295

3400-7000

287

Duration @ .050” IN EX

230

240

Firing Order: 1•5•4•2•6•3•7•8

Valve Lift w/1.60 Rockers IN EX

.563

.592

Lobe Separation Intake Angle Centerline

287

230

240

.563

285

231

231

.501

.592 .501

231

231

.512

.512

231

231

.512

.512

108

104

Hyd. Hyd.

106

Hyd. Hyd.

112

108

108

104

110

Strong power range from 3,500 up. Needs 4bbl., header & stall.

291

234

244

.572

.596

108

234

244

.572

.596

112

Lopey idle, Street/Strip or nostalgia. Likes headers & gears.

287

234

240

.572

.592

106

Bracket or 1/4 to 3/8 mile 4bbl. Oval Track. Proven winner.

287

234

240

.572

.592

108

Lopey idle, good mid-range power. Needs 3200+ stall.

283

236

236

.583

.583

Lopey idle, Pro-Street & Bracket Racing profile.

293

240

246

.592

.601

108 108

240

246

.592

.601

110

240

246

.592

.601

112

244

254

.596

.625

108

102

Hyd. Hyd.

1,16

104

Hyd. Hyd.

108

104 104

106 108

104

Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR.

301

244

254

.596

.625

112

107

Performance/Competition. Works well with small blower or NOS.

293

246

246

.601

.601

108

Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

104

Hyd. Hyd.

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall.

295

248

248

.605

.605

110

E.T. Brackets. Strong mid & upper end power range.

301

248

254

.605

.625

108

106

Hyd. Hyd.

Rough idle, Pro Street/Strip. Strong upper end power. Needs good heads, 3500+ stall.

301

248

254

.605

.625

110

Rough idle, Pro Street/Bracket. Broad upper end power.

Custom Grind Camshaft

Hydraulic Flat Tappet Special Order Camshaft.

1

1,16

Fair idle, Hot Street/Bracket, broad mid range performance. 3000+ stall.

301

1

Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

293

1

Hyd. Hyd.

Rough idle, Hot Street/Bracket, great mid range & top end power. 3500+ stall.

293

1,16

104

Rough idle, Hot Street/Strip, Big mid range torque and acceleration.

291

1,16

Hyd. Hyd.

Fair idle, Broad power band. Works well in heavy vehicles.

285

Hyd. Hyd.

104

Broad power range, extra performance in smaller engine.

285

Cam Notes

108

Lopey idle, Hot Street/Brackets. 2500+ stall, 9.0:1+ CR. Hot Street & mild Bracket Racing.

Valve Lash IN EX

106

Hyd. Hyd.

Needs good heads, 3500+.

Hyd. Hyd.

1,16 1,16 1,16 1,16 1,16 1,16 1,16 1,16 1,16 1,16 1,16 1,16 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 16 Lobes designed to take maximum advantage of .875” dia. lifter.

176

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 177

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

91211 3 91212

NA

91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 91212

NA NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 98436-K11

98436

97118

-93005 93316 25 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95198 95007

90080 90081 7

90200 90201 7

90080 90081 7

90200 90201 7

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

177

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 178

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

228005-09S 228045-09S 228085-09S

Cam & Lifter Set Part No.

CL228005-09S 36 CL228045-09S 36 CL228085-09S 36

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

Valve Lift w/1.60 Rockers IN EX

229135-14S 229275-16S 229225-14S 229425-14S

CL229165-14S36 CL229135-14S36 CL229275-16S36 CL229225-14S36 CL229425-14S36

FORD SMALL BLOCK

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

273

Duration @ .050” IN EX

221

221

Valve Lift w/1.60 Rockers IN EX

.544

287

225

235

.560

220315-10S 220315-12S

CL220225-12S 36

285

CL220315-10S 36 CL220315-12S 36

262

1000-4400

262

1000-4400

110

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

.571

114

110

235

233

.580

.576

116

112

Hyd. Hyd.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

260

800-4200

114

Valve Lash IN EX

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider 220225-12S

.544

Lobe Separation Intake Angle Centerline

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

Firing Order: 1•3•7•2•6•5•4•8

Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears.

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Cam Notes

304 243 251 .565 .549 109 103 Hyd. Hyd. 1,23 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider 229165-14S

Valve Lash IN EX

296 235 243 .565 .565 109 103 Hyd. Hyd. 1,23 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

Lobe Separation Intake Angle Centerline

288 227 235 .560 .565 109 103 Hyd. Hyd. 1,23 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•3•7•2•6•5•4•8

266

Duration @ .050” IN EX

207

213

209

215

Valve Lift w/1.60 Rockers IN EX

.480

.496

.496

.501

Improved throttle response & low end torque.

268

209

215

1,2 1,2 1,2

Firing Order: 1•3•7•2•6•5•4•8 Lobe Separation Intake Angle Centerline

.496

.501

Improved throttle response & low end torque.

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

112

108

Hyd. Hyd.

112

108

Hyd. Hyd.

Great daily usage, smooth idle, great fuel economy.

268

1,2

110

106

1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8. 36 Includes Lifter “Spider” Kit.

178

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 179

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7

90200 90201 7

Pushrods

95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 221-302 1963-1995 (EXCEPT 302 H.O.)

BOOST™ Retro-Fit Hydraulic Roller Camshafts Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95004 95004 95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7

90200 90201 7

Pushrods

95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

179

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 180

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

220235-10S 220235-12S 222765-13S 221275-08S 221275-10S 221275-12S 221275-14S 222725-10S 221145-10S 221145-12S

222745-12S 220245-10S 220245-12S 222755-08S 222755-12S 220325-08S 220325-10S 220325-12S 220525-10S 220525-12S 220305-08S 220255-08S 220255-10S

Cam & Lifter Set Part No.

CL220235-10S 36 CL220235-12S 36 CL222765-13S 36 CL221275-08S 36 CL221275-10S 36 CL221275-12S 36 CL221275-14S 36 CL222725-10S 36 CL221145-10S 36 CL221145-12S 36

CL222745-12S 36 CL220245-10S 36 CL220245-12S 36 CL222755-08S 36 CL222755-12S 36 CL220325-08S 36 CL220325-10S 36 CL220325-12S 36 CL220525-10S 36 CL220525-12S 36 CL220305-08S 36 CL220255-08S 36 CL220255-10S 36

Duration Advertised IN EX

266

1000-4800

266

1000-5000

270

1500-5500

270

1200-5600

270

1200-5600

270

1200-5600

270

1200-5600

272

1800-5800

272

2000-6000

272

2000-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

284

2400-6000

284

2200-6000

284

2200-6000

272

Duration @ .050” IN EX

213

219

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.517

.517

Lobe Separation Intake Angle Centerline

110

Fair idle, good low & mid-range performance increase.

272

213

219

.517

.517

112

106 108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

217

217

.496

.496

113

109

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

Hyd. Hyd. Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

110 114 110

106 110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110 112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.533

.544

108

Fair idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

108 106 108

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

108 106 108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

286

227

233

.597

.597

112

108

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.

284

231

231

.544

.544

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.544

.565

108

104

Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8. 36 Includes Lifter “Spider” Kit.

180

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:17 AM Page 181

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

181

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 182

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

220255-12S 222735-10S 222735-12S 221815-10S 220275-10S 220275-12S 223365-10S 220335-10S 220335-12S 220355-10S 220355-12S 224455-12S 229994

Cam & Lifter Set Part No.

CL220255-12S 36 CL222735-10S 36 CL222735-12S 36 CL221815-10S 36 CL220275-10S 36 CL220275-12S 36 CL223365-10S 36 CL220335-10S 36 CL220335-12S 36 CL220355-10S 36 CL220355-12S 36 CL224455-12S 36 NA

Duration Advertised IN EX

284

2200-6200

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6700

304

3000-7000

304

3000-7000

306

3200-7200

288

Duration @ .050” IN EX

231

235

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.565

Lobe Separation Intake Angle Centerline

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

294

235

241

.581

.581

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft, Small Base Circle

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8. 36 Includes Lifter “Spider” Kit.

182

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 183

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

183

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 184

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts for Use With Tie-Bar Style Hydraulic Roller Lifters Cam Part No.

228005-09 228045-09 228085-09

Cam & Lifter Set Part No.

CL228005-09 CL228045-09 CL228085-09

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

229135-14 229275-16 229225-14 229425-14

CL229165-14 CL229135-14 CL229275-16 CL229225-14 CL229425-14

FORD SMALL BLOCK

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

273

220315-10 220315-12

221

221

CL220225-12

287

CL220315-10 CL220315-12

262

1000-4400

262

1000-4400

Valve Lift w/1.60 Rockers IN EX

.544

.544

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,2

Hyd. Hyd.

225

235

.560

.571

114

110

285

235

233

.580

.576

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Duration Advertised IN EX

260

800-4200

Firing Order: 1•3•7•2•6•5•4•8

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

for Use With Tie-Bar Style Hydraulic Roller Lifters 220225-12

Duration @ .050” IN EX

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

Cam Notes

Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears.

Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Valve Lash IN EX

304 243 251 .565 .549 109 103 Hyd. Hyd. 1,23 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

for Use With Tie-Bar Style Hydraulic Roller Lifters 229165-14

Lobe Separation Intake Angle Centerline

296 235 243 .565 .565 109 103 Hyd. Hyd. 1,23 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

Valve Lift w/1.60 Rockers IN EX

288 227 235 .560 .565 109 103 Hyd. Hyd. 1,23 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•3•7•2•6•5•4•8

266

Duration @ .050” IN EX

207

213

209

215

Valve Lift w/1.60 Rockers IN EX

.480

.496

.496

.501

Improved throttle response & low end torque.

268

209

215

1,2 1,2 1,2

Firing Order: 1•3•7•2•6•5•4•8 Lobe Separation Intake Angle Centerline

.496

.501

Improved throttle response & low end torque.

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

112

108

Hyd. Hyd.

112

108

Hyd. Hyd.

Great daily usage, smooth idle, great fuel economy.

268

1,2

110

106

1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

184

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 185

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7

90200 90201 7

Pushrods

95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 221-302 1963-1995 (EXCEPT 302 H.O.)

BOOST™ Retro-Fit Hydraulic Roller Camshafts Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95003 95003 95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

Retro-Fit Hydraulic Roller Camshafts

for Use With Tie-Bar Style Hydraulic Roller Lifters Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7

90200 90201 7

Pushrods

95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

185

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 186

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshafts

for Use With Tie-Bar Style Hydraulic Roller Lifters

Cam Part No.

220235-10 220235-12 222765-13 221275-08 221275-10 221275-12 221275-14 222725-10 221145-10 221145-12

222745-12 220245-10 220245-12 222755-08 222755-12 220325-08 220325-10 220325-12 220525-10 220525-12 220305-08 220255-08 220255-10

Cam & Lifter Set Part No.

CL220235-10 CL220235-12 CL222765-13 CL221275-08 CL221275-10 CL221275-12 CL221275-14 CL222725-10 CL221145-10 CL221145-12

CL222745-12 CL220245-10 CL220245-12 CL222755-08 CL222755-12 CL220325-08 CL220325-10 CL220325-12

CL220525-10 CL220525-12 CL220305-08 CL220255-08 CL220255-10

Duration Advertised IN EX

266

1000-4800

266

1000-5000

270

1500-5500

270

1200-5600

270

1200-5600

270

1200-5600

270

1200-5600

272

1800-5800

272

2000-6000

272

2000-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

284

2400-6000

284

2200-6000

284

2200-6000

272

Duration @ .050” IN EX

213

219

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.517

.517

Lobe Separation Intake Angle Centerline

110

106

Fair idle, good low & mid-range performance increase.

272

213

219

.517

.517

112

108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

217

217

.496

.496

113

109

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

Hyd. Hyd. Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

110

106

114

110

110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110

225

231

.533

.544

106

112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

108

108

108

Lopey idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

108 106 108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

286

227

233

.597

.597

112

108

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.

284

231

231

.544

.544

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.544

.565

108

104

Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

186

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 187

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 912603 912603

91168 3 91260 91168 3 91260 91168 3 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

187

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 188

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshafts

for Use With Tie-Bar Style Hydraulic Roller Lifters

Cam Part No.

220255-12 222735-10 222735-12 221815-10 220275-10 220275-12 223365-10 220335-10 220335-12 220355-10 220355-12 224455-12 229995

Cam & Lifter Set Part No.

CL220255-12 CL222735-10 CL222735-12 CL221815-10 CL220275-10 CL220275-12 CL223365-10 CL220335-10 CL220335-12 CL220355-10 CL220355-12 CL224455-12 NA

Duration Advertised IN EX

284

2200-6200

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6700

304

3000-7000

304

3000-7000

306

3200-7200

288

Duration @ .050” IN EX

231

235

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.565

Lobe Separation Intake Angle Centerline

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

294

235

241

.581

.581

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,23

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

188

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 189

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

912603

NA

91168 3 91260 912603 912603 912603 912603 912603 912603 912603 912603 912603 912603 91168 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

189

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 190

CAMSHAFTS

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Rattler Cams™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

228005-09 228045-09 228085-09

Cam & Lifter Set Part No.

CL228005-09E17 CL228005-0918 CL228045-09E17 CL228045-0918 CL228085-09E17 CL228085-0918

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

Valve Lift w/1.60 Rockers IN EX

229165-14 229135-14 229275-16 229225-14 229425-14

296 235 243 .565 .565 109 103 Hyd. Hyd. 1,17,18 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall. 304 243 251 .565 .549 109 103 Hyd. Hyd. 1,17,18 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

CL229165-14E17 CL229165-1418 CL229135-14E17 CL229135-1418 CL229275-16E17 CL229275-1618 CL229225-14E17 CL229225-1418 CL229425-14E17 CL229425-1418

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

Duration @ .050” IN EX

220225-12 220315-10 220315-12

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,17,18

273 221 221 .544 .544 114 110 Hyd. Hyd. 1,17,18 Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears. 287

225

235

.560

.571

114

110

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

285

235

233

.580

.576

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

1,17,18 1,17,18 1,17,18

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

Cam Notes

• 5.0L/302 H.O. 1985-2002

Cam & Lifter Set Part No.

FORD SMALL BLOCK

Valve Lash IN EX

288 227 235 .560 .565 109 103 Hyd. Hyd. 1,17,18 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

Lobe Separation Intake Angle Centerline

Cam & Lifter Set Part No.

CL220225-12E17 CL220225-1218 CL220315-10E17 CL220315-1018 CL220315-12E17 CL220315-1218

Duration Advertised IN EX

260

800-4200

262

1000-4400

262

1000-4400

266

Duration @ .050” IN EX

207

213

Valve Lift w/1.60 Rockers IN EX

.480

.496

Lobe Separation Intake Angle Centerline

268

209

215

.496

.501

268

209

215

.496

.501

Improved throttle response & low end torque.

Cam Notes

112

108

Hyd. Hyd.

1,17,18

112

108

Hyd. Hyd.

1,17,18

Great daily usage, smooth idle, great fuel economy.

Improved throttle response & low end torque.

Valve Lash IN EX

110

106

Hyd. Hyd.

1,17,18

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

190

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 191

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Rattler Cams™ Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7

Fuel Pump Distributor Pushrod Gear

90200 95302-16 90201 7

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33 912603 912633,33 912603 912633,33

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7 90080 90081 7 90080 90081 7

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7

Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications Components Valve Spring, Retainer & Lock Kit

94210 19 94310 19

• 5.0L/302 H.O. 1985-2002

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications Components Valve Spring, Retainer & Lock Kit

Timing Set

Fax: 1300 350 454

90080 90081 7

90200 95302-16 90201 7

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

191

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 192

CAMSHAFTS

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

220235-10 220235-12 222765-13 221275-08 221275-10 221275-12 221275-14 222725-10 221145-10 221145-12

222745-12 220245-10 220245-12 222755-08 222755-12 220325-08 220325-10 220325-12 220525-10 220525-12 220305-08 220255-08 220255-10 220255-12

Cam & Lifter Set Part No.

CL220235-10E17 CL220235-1018 CL220235-12E17 CL220235-1218 CL222765-13E17 CL222765-1318 CL221275-08E17 CL221275-0818 CL221275-10E17 CL221275-1018 CL221275-12E17 CL221275-1218 CL221275-14E17 CL221275-1418 CL222725-10E17 CL222725-1018 CL221145-10E17 CL221145-1018 CL221145-12E17 CL221145-1218 CL222745-12E17 CL222745-1218 CL220245-10E17 CL220245-1018 CL220245-12E17 CL220245-1218 CL222755-08E17 CL222755-0818 CL222755-12E17 CL222755-1218 CL220325-08E17 CL220325-0818 CL220325-10E17 CL220325-1018 CL220325-12E17 CL220325-1218 CL220525-10E17 CL220525-1018 CL220525-12E17 CL220525-1218 CL220305-08E17 CL220305-0818 CL220255-08E17 CL220255-0818 CL220255-10E17 CL220255-1018 CL220255-12E17 CL220255-1218

Duration Advertised IN EX

266

1200-4800

266

1200-5000

270

1500-5500

270

1600-5600

270

1600-5600

270

1600-5600

270

1600-5600

272

1800-5800

272

1800-6000

272

1800-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

284

2400-6000

284

2200-6000

284

2200-6000

284

2200-6200

272

Duration @ .050” IN EX

213

219

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.517

.517

Lobe Separation Intake Angle Centerline

110

Fair idle, good low & mid-range performance increase.

272

213

219

.517

.517

112

106 108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

217

217

.496

.496

113

109

Valve Lash IN EX

Hyd. Hyd.

1,17,18

Hyd. Hyd.

1,17,18

Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

Lopey to fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

110 114 110

106 110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110 112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.533

.544

108

Fair idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

108 106 108

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd.

104

Hyd. Hyd.

106 108

Choppy idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

108

106

Cam Notes

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18

286 227 233 .597 .597 112 108 Hyd. Hyd. 1,17,18 Choppy idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears. 284

231

231

.544

.544

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.544

.565

108

104

Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

Hyd. Hyd.

1,17,18 1,17,18 1,17,18 1,17,18

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

192

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 193

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

193

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 194

CAMSHAFTS

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications (cont.) Cam Part No.

222735-10 222735-12 221815-10 220275-10 220275-12 223365-10 220335-10 220335-12 220355-10 220355-12 224455-12 229995

Cam & Lifter Set Part No.

CL222735-10E17 CL222735-1018 CL222735-12E17 CL222735-1218 CL221815-10E17 CL221815-1018 CL220275-10E17 CL220275-1018 CL220275-12E17 CL220275-1218 CL223365-10E17 CL223365-1018 CL220335-10E17 CL220335-1018 CL220335-12E17 CL220335-1218 CL220355-10E17 CL220355-1018 CL220355-12E17 CL220355-1218 CL224455-12E17 CL224455-1218 NA

Duration Advertised IN EX

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6800

304

3200-7000

304

3200-7000

306

3400-7200

294

Duration @ .050” IN EX

235

241

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.581

.581

Lobe Separation Intake Angle Centerline

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Valve Lash IN EX

Hyd. Hyd.

1,17,18

Hyd. Hyd.

1,17,18

Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Cam Notes

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

194

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 195

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 5.0L/302 H.O. 1985-2002

Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 --

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 --

--

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

195

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 196

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

American Muscle™ Mechanical Flat Tappet Camshafts Cam Part No.

217322-14 217272-07

Cam & Lifter Set Part No.

CL217322-14 CL217322-14DL 4 CL217272-07 CL217272-07DL 4

FORD SMALL BLOCK

Duration Advertised IN EX

310

1800-5800

318

3000-7000

310

Duration @ .050” IN EX

227

212342-10 210542-08 211332-08

210102-06 210102-08 210102-12 211002-08

212352-06 211052-08

212372-08 212362-08 212532-06 212322-08 219992

CL212342-10 CL212342-10DL 4 CL210542-08 CL210542-08DL 4 CL211332-08 CL211332-08DL 4 CL210102-06 CL210102-06DL 4 CL210102-08 CL210102-08DL 4 CL210102-12 CL210102-12DL 4 CL211002-08 CL211002-08DL 4 CL212352-06 CL212352-06DL 4 CL211052-08 CL211052-08DL 4 CL212372-08 CL212372-08DL 4 CL212362-08 CL212362-08DL 4 CL212532-06 CL212532-06DL 4 CL212322-08 CL212322-08DL 4 NA

320

Duration Advertised IN EX

265

2000-5800

258

1800-5600

264

2200-6000

275

2400-6400

275

2400-6400

275

2400-6500

279

2600-6500

281

2800-6800

294

2800-7000

285

3000-7200

289

3400-7400

295

3600-7600

295

3600-7800

.477

.477

Lobe Separation Intake Angle Centerline

114

108

251

252

.528

.528

107

102

Near duplicate of the Ford LeMans cam (FMC #C7FE-6250-A).

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Cam & Lifter Set Part No.

Valve Lift w/1.60 Rockers IN EX

Valve Lash IN EX

.018

.018

Near duplicate of the Ford 271HP/289 (FMC #C3OZ-6250-C) & 290HP/302 (C9ZZ-6250-A).

Mechanical Flat Tappet Camshafts Cam Part No.

227

Firing Order: 1•5•4•2•6•3•7•8

265

Duration @ .050” IN EX

230

230

Firing Order: 1•5•4•2•6•3•7•8

Valve Lift w/1.60 Rockers IN EX

.512

.512

Lobe Separation Intake Angle Centerline

110

106

Good Street cam, broad power range. 2200+ stall recommended.

264

230

236

.561

.574

108

104

Hot Street/Mild Strip. Good mid range torque & power. 2000+ stall.

268

236

240

.574

.590

108

104

Street/Strip, high torque with mid range & top end power. 2500+ stall.

281

240

246

.539

.555

106

102

Hot Street/Brackets. Lopey idle. Needs higher CR & gears.

281

240

246

.539

.555

108

104

Hot Street/Bracket. Needs 10.0+ CR, 3200+ stall & gears.

281

240

246

.020

.539

.555

112

108

.020

Valve Lash IN EX

.022

.022

Cam Notes

1,34 1

Cam Notes

1

.018

.018

1,16,34

.022

.022

1

.018 .022

.022

.018

1,16,34

.022

.022

Fair idle, Moderate Street/Bracket, good low & mid range torque. 10.5-11.5:1, 3000+ stall.

279

244

244

.544

.544

108

104

Rough idle, super mid-range performance. Needs 11.0:1 CR-up.

287

246

252

.549

.565

106

102

Fair idle, Street/Strip in light car. 10.0:1 CR, 4.10 or lower gears.

294

248

248

.544

.544

Street/Strip, powerful through entire rpm range.

291

250

256

.560

.571

108

104

108

104

Rough idle, needs good induction system. Good Oval Track cam.

295

254

260

.587

.592

108

104

Rough idle, Bracket cam. Best with 11.0:1+ CR & 4000+ stall.

299

260

264

.592

.592

106

102

Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners. 331-363.

303

260

268

.592

.587

108

Rough idle, Bracket favorite. Needs 11.0:1 CR & 4000+ stall.

Custom Grind Camshaft

104

.022

.022

.022

.022

.022 .022 .022 .022 .022

.022 .022 .022 .022 .022

Mechanical Flat Tappet Special Order Camshaft.

1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1 4 16 34

196

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Lobes designed to take maximum advantage of .875” dia. lifter. Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 197

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995 (EXCEPT 302 H.O.)

American Muscle™ Mechanical Flat Tappet Camshaft Components Lifters

Rev Kit

91215 3 91218 4

NA

91215 3 91218 4

NA

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK Rev Kit

91215 3 91218 4

NA

91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 91218

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Stud Girdles

Pushrods

90200 90201 7

95198 95007

90080 90081 7

90200 90201 7

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95198 95007

90080 90081 7

Valve Locks

Valve Seals

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 4 7 10

Rocker Arms

--

--

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks.

Phone: 1300 350 351

95198 95007

Fuel Pump Distributor Pushrod Gear

NA NA

94427 94427

Timing Set

94210 19 94310 19 94210 19 94310 19

• 221-302 1963-1995 (EXCEPT 302 H.O.)

Mechanical Flat Tappet Camshaft Components Lifters

Valve Seals

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

19 Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312. 25 Machining Required.

Web: www.fabre.com.au

197

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 198

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995

Big Bottle Cams™- Nitrous Oxide Mechanical Roller Cams Firing Order: 1•3•7•2•6•5•4•8 Cam Part No.

Cam & Lifter Set Part No.

220373-12

NA

221133-12

220673-12 220793-12 220793-14 220393-14 221073-14 221093-12 229993

NA

NA NA NA NA NA NA

NA

Duration Advertised IN EX

287

3000-6800

295

3800-7200

299

4200-8000

305

4400-8400

305

4400-8400

309

4600-8600

313

4600-8600

313

5000-8400

299

Duration @ .050” IN EX

255

267

Valve Lift w/1.60 Rockers IN EX

.640

.640

Lobe Separation Intake Angle Centerline

112

108

Valve Lash IN EX

.022

.022

Fair idle, Performance/Strip with plate system. Great mid range. 11.5:1+ CR, 3500+ stall.

305

263

273

.672

.688

112

108

.022

.022

Rough idle, Street/Bracket with manifold system. Good upper rpm. 11.5:1+ CR, 4000+.

309

267

277

.688

.693

112

108

.022

Competition with large plate system. Good mid to upper range. 12.0:1+ CR.

319

273

287

.725

.693

112

108

.022

.022 .022

Best with larger cubic inch, large plate or plumbed system. 12.0:1+ CR, 4500+ stall.

319

273

287

.725

.693

114

110

Large stroker with multi stage system. 12.0:1+ CR, 4500+ stall.

323

277

291

.720

.720

114

110

.022 .022

Great with big stroke combinations. Large multi stage system. 12.5:1+ CR.

327

281

295

.779

.763

Big stroker, big heads, big multi stage system.

331

281

299

.779

.763

114 112

110

108

.022

.022

Large cubic inch, all out Competition. Best of everything. Works good w/NOS.

Custom Grind Camshaft

Mechanical Roller Special Order Camshaft.

.022 .022 .022

.022

Cam Notes

1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 5 Requires upgraded distributor gear. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

198

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 199

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91234 91288

NA

NA

98844 25 97130 10 97222 10 93017 10 93316 25

91234 91288

NA

NA

98844 25 97130 10 97222 10 93017 10 93316 25

91234 91288

91234 91288 91234 91288 91234 91288 91288 91240 91288 91240 --

NA

NA NA NA NA NA

NA

NA

NA NA NA NA NA --

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

98844 25 97130 10 97222 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98844 25 97130 10 97222 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 --

--

--

--

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95007 95007 95007 95007 95007 95007 95007 95007 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94425 94427

94310 19

NA

94425 94427

94310 19

NA NA NA NA NA NA

NA

94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427

94427

94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19

Components Notes: master note list on page 260 7 10 19 32

Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312. These lifters are not recommended for street use.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

199

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 200

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995

Steel Billet Mechanical Roller Camshafts Cam Part No.

Cam & Lifter Set Part No.

221213-10

NA

221213-08 221203-08 221203-10 220183-08 220183-10 220173-06 220173-08 221313-10 221113-08

221013-06 221013-08 220593-06 221133-06 221133-08

222313-06 222313-08 222123-06 222123-08 221173-06

221613-06 221613-08 221223-08 221223-10

NA NA NA NA NA NA NA NA

NA

NA NA NA

NA NA

NA NA NA NA

NA

NA NA NA NA

Duration Advertised IN EX

261

2000-6000

261

2000-6000

269

2200-6400

269

2200-6400

269

2200-6200

269

2200-6200

275

2400-6500

275

2400-6400

277

2600-6200

277

2600-6500

285

2800-6600

285

2800-6600

285

2800-6600

287

2900-6800

287

2900-6800

291

3400-7200

291

3400-7200

291

3400-7400

291

3400-7400

295

3800-7600

299

4200-7800

299

4200-7800

301

4200-8000

301

4200-8000

269

Duration @ .050” IN EX

229

237

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.592

.592

Lobe Separation Intake Angle Centerline

108

104

Noticeable idle, Street Rod Cruiser. Should have 9.0:1 CR, 2000+ stall.

269

229

237

.592

.592

110

106

Valve Lash IN EX

.022

.022

.022

.022

Noticeable idle, good for Weekend Street Cruiser. Should have 9.0:1 CR, 2000+ stall.

269

237

237

.592

.592

108

104

.022

Rough idle, Street/mild Strip. Good lower mid range. 9.5:1 CR, 2500+ stall.

269

237

237

.592

.592

110

106

.022

Rough idle, Street Performance/mild Strip. Recommend 9.5:1 CR, 2500+ stall.

275

237

243

.592

.592

108

104

Mild rough idle, Weekend Cruiser/mild Strip. 2500+ stall recommended.

275

237

243

.592

.592

110

106

.022

.022

.022

.022

.022

.022

Mild rough idle, Weekend Cruiser/Power Tour favorite. 2500+ stall recommended.

281

243

249

.592

.600

106

102

Lopey idle, Strong low to mid range torque. 10.0:1+ CR, 2500+ stall.

281

243

249

.592

.600

108

104

.022 .022

Rough idle, Strong low to mid range power band. 10.0:1+ CR, 2500+ stall.

277

245

245

.624

Nice idle. Strong low & mid-range.

285

245

253

.624

.624 .624

Lopey idle. Strong mid-range. 10.0:1+ CR.

291

253

259

.624

.624

110

106

108

104

106

102

.022

.022 .022

.022 .022

.022

.022 .022

Heavy Bracket or 1/4-3/8 mile Oval Track, Good mid range torque. 11.0-12.5:1 CR.

291

253

259

.624

.624

108

104

Lopey idle. Strong mid-range with top end increase.

291

253

259

.683

.683

106

Good mid-range horsepower, rough idle. Needs 11.0:1 CR-up.

299

255

267

.640

.640

106

102 102

Strong mid & upper rpm, banked Oval Track & Brackets w/auto trans.

299

255

267

.640

.640

108

104

Mid to upper range horsepower & torque. 11.0:1+ Good heads.

295

259

263

.624

.656

106

102

.022 .022 .022 .022 .022

Oval Track 1/4-3/8 mile. Good mid to upper torque & power. 2bbl. or 4bbl. carb.

295

259

263

.624

.656

108

104

Rough idle, Bracket E.T., good mid range. 11.5:1+ CR, 3500+ stall.

299

259

267

.683

.672

106

102

.022 .022

.022 .022 .022 .022 .022 .022 .022

Oval Track 3/8-1/2 mile. Good mid to upper torque & power. Best with 4bbl. carb.

299

259

267

.683

.672

108

104

.022

Bracket/Pro/Super Pro, good mid to upper range power. 12.0:1+, 3800+ stall.

299

263

267

.683

.672

106

Strong mid & upper range horsepower. 11.0:1+ Good heads.

303

267

271

.672

.667

106

102 102

.022 .022

Competition use, good mid & upper HP, needs good heads & compression.

303

267

271

.672

.667

108

104

.022

Long Oval Track or Bracket E.T. Drag, good upper rpm horsepower. 12.5:1 CR.

305

269

273

.720

.688

Competition use, good mid & upper power.

305

269

273

.720

.688

108 110

104

106

.022

.022

.022 .022 .022 .022 .022

.022

Bracket/Competition, good upper end torque & power. 12.0:1+ CR, race converter.

Cam Notes

1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 5 Requires upgraded distributor gear. 23 Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

200

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 201

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91250 91217 32

NA

NA

98630 25 97128 10 97220 10 93017 10 93316 25

91250 91217 32

NA

NA

98630 25 97128 10 97220 10 93017 10 93316 25

91250 91217 32 91250 91217 32 91250 91217 32 91250 91217 32 91217 91234 91217 91234 91217 91234 91217 91234 91217 91234 91217 91234 91234 91288 91234 91288 91234 91288 91234 91288 91234 91288 91234 91288

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

91234 91288

NA

NA

91234 91288

NA

NA

91234 91288 91234 91288 91234 91288 91234 91288

NA NA NA NA

NA NA NA NA

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

98630 25 97128 10 97220 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98630 25 97128 10 97220 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98630 25 97128 10 97220 10 93017 10 93316 25 98630 25 97128 10 97220 10 93017 10 93316 25

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

98630 25 97128 10 97220 10 93017 10 93316 25

90080 90081 7

98732 25 97130 10 97222 10 93017 10 93316 25

90080 90081 7

98630 25 97128 10 97220 10 93017 10 93316 25 98732 25 97130 10 97222 10 93017 10 93316 25 98732 25 97130 10 97222 10 93017 10 93316 25 98732 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25 98844 25 97130 10 97222 10 93017 10 93316 25

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007 95007

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94425 94427

94310 19

NA

94425 94427

94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427

94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19

Components Notes: master note list on page 260 7 10 19 32

Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312. These lifters are not recommended for street use.

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

201

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 202

CAMSHAFTS

FORD SMALL BLOCK

• 221-302 1963-1995

Steel Billet Mechanical Roller Camshafts (cont.) Cam Part No.

Cam & Lifter Set Part No.

221813-06

NA

221123-08

221813-08 221863-06 221863-08 221863-10 221083-08 221083-10 221093-12 229993

NA

299

4200-8000

301

4400-8400

NA

301

4400-8600

NA

301

4400-8400

NA

301

4400-8600

NA

301

4500-8800

NA

307

4800-8600

NA

307

4800-8600

NA

313

5000-8400

NA

FORD SMALL BLOCK

Duration Advertised IN EX

307

Duration @ .050” IN EX

267

275

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.672

.661

Lobe Separation Intake Angle Centerline

108

104

Strong upper horsepower. 11.5:1+ Good heads & induction, 4500+ stall.

309

269

277

.693

.661

106

102

Valve Lash IN EX

.022 .022

Rough idle, Competition, Great upper rpm torque. 12.0:1+ CR, 4500+ stall.

309

269

277

.693

.661

108

104

.022

.022

1,5,23

.022

1,5,23

.022

Competition, good upper rpm torque & horsepower. 12.0:1+ CR & race converter.

309

269

277

.720

.693

106

102

.022

Competition, good upper mid to top end torque. 12.0:1+ CR & race converter.

309

269

277

.720

.693

108

104

.022

.022 .022

Super Pro/Bracket, good upper rpm torque & horsepower. 12.0:1+ CR & race converter.

309

269

277

.720

.693

110

106

Good mid range power with top end pull. 12.0:1+ CR & race converter.

315

275

283

.688

.672

Strong upper horsepower. 11.5:1+ Good heads.

315

275

283

.688

.672

108 110

Competition profile, good top end power. Needs good parts.

331

281

299

.779

.763

112

.022

.022

.022

108

.022

.022

.022

Large cubic inch, all out Competition. Best of everything. Works good w/NOS.

Custom Grind Camshaft

.022

104

106

Cam Notes

.022

Mechanical Roller Special Order Camshaft.

1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23 1,5,23

• 351W 1969-1996

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Sets - 5 Year No Fault Warranty (see page 3 for details) Cam & Lifter Set Part No.

Cam & Direct Lube Lifter Set Part No.

MC220931-10

MC220931-10DL 4

MC220021-12 MC220041-12 MC220951-10 MC220051-12 MC220961-08

MC220021-12DL 4 MC220041-12DL 4 MC220951-10DL 4 MC220051-12DL 4 MC220961-08DL 4

Duration Advertised IN EX

259

1000-5000

269

1400-5200

275

1200-5400

275

2000-6000

277

2400-6600

285

2600-6800

267

Duration @ .050” IN EX

205

213

Valve Lift a/1.60 Rockers IN EX

.448

.480

Lobe Separation Intake Angle Centerline

269

215

215

.475

.475

275

221

221

.475

.475

221

231

.501

.501

223

235

.496

.520

112

108

Hyd. Hyd.

110 110 112

Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

285

231

231

.501

.501

1

Hyd. Hyd.

Street & Strip. Needs 4 barrel, headers & low gears.

289

Hyd. Hyd.

108

Good idle & throttle response. Ok with small blower.

285

Cam Notes

112

Great low & mid-range. Smooth idle. Good in PUs & RVs. Lopey idle. Excellent Street Performance cam.

Valve Lash IN EX

108

Broad power range, extra performance in smaller engine.

106 106 108

104

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1 1 1 1 1

Cam Notes: master note list on page 260 1 4 5 23

202

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires upgraded distributor gear. Ignition firing order must be changed to 1-3-7-2-6-5-4-8.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 203

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 221-302 1963-1995

Steel Billet Mechanical Roller Camshaft Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91234 91288

NA

NA

98844 25 97130 10 97222 10 93017 10 93316 25

91234 91288

NA

NA

98844 25 97130 10 97222 10 93017 10 93316 25

91234 91288

91234 91288 91234 91288 91234 91288 91234 91288 91234 91288 91288 91240 --

NA

NA

NA

NA

NA

NA

--

90200 90201 7

98844 25 97130 10 97222 10 93017 10 93316 25

90080 90081 7

90200 90201 7

--

FORD SMALL BLOCK

Stud Girdles

90080 90081 7

98844 25 97130 10 97222 10 93017 10 93316 25

NA

Rocker Arms

98844 25 97130 10 97222 10 93017 10 93316 25

98844 25 97130 10 97222 10 93017 10 93316 25

NA

NA

Valve Seals

98844 25 97130 10 97222 10 93017 10 93316 25

NA

NA

Valve Locks

98844 25 97130 10 97222 10 93017 10 93316 25

NA

NA

Steel Titanium Retainers Retainers

98844 25 97130 10 97222 10 93017 10 93316 25

NA

NA

Valve Springs

--

--

--

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95007 95007 95007 95007 95007 95007 95007 95007 95007 --

Lifters

Rev Kit

91211 3 91216 4

NA

98412-K11

91211 3 91216 4 91211 3 91216 4 91211 3 91216 4 91211 3 91216 4 91211 3 91216 4

NA NA NA NA NA

98412-K11 98412-K11 98412-K11 98412-K11 98412-K11

Valve Springs

98412

98412 98412

Steel Titanium Retainers Retainers

Rocker Arms

Stud Girdles

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118 97118

98412

97118

97118

-93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10

Included in Cam & Lifter Sets. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks.

Phone: 1300 350 351

Valve Seals

-93005 93316 25 97216 10 93017 10

98412 98412

Valve Locks

97118

Components Notes: master note list on page 260 3 4 7 10

Timing Set

NA

94425 94427

94310 19

NA

94425 94427

94310 19

NA NA NA NA NA NA NA

NA

94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427 94425 94427

94427

94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19 94310 19

• 351W 1969-1996

Max Certified™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Fuel Pump Distributor Pushrod Gear

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95015 95015 95015 95015 95015 95015

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA

94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

19 Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Web: www.fabre.com.au

203

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 204

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

American Muscle™ Hydraulic Flat Tappet Camshafts Cam Part No.

227571-14

Cam & Lifter Set Part No.

CL227571-14

FORD SMALL BLOCK

Duration Advertised IN EX

260

800-4500

270

Duration @ .050” IN EX

198

208

• 351W 1969-1996

220021-12 220031-12 222121-12

Cam & Lifter Set Part No.

CL220021-12 CL220031-12 CL222121-12

FORD SMALL BLOCK

Duration Advertised IN EX

259

1000-5000

269

1500-5400

279

1600-5800

267

Duration @ .050” IN EX

205

213

228021-09 228061-09 228101-09

CL228021-09

277

CL228061-09 CL228101-09

281 289

2000-5700

297

2400-6100

114

115

Cam Notes

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.448

.480

Lobe Separation Intake Angle Centerline

112

108

215

223

.475

.496

112

108

289

225

235

.496

.501

112

108

Street Force™ 3, Noticeable idle, Hot Street & mild Bracket Racing.

Duration Advertised IN EX

1800-5500

.445

Valve Lash IN EX

Hyd. Hyd.

1

1

Street Force™ 2, Good idle & throttle response. Needs 4 barrel & good exhaust.

• 351W 1969-1996

Cam & Lifter Set Part No.

.416

Lobe Separation Intake Angle Centerline

Street Force™ 1, Good idle, Mild Street performance, strong low end torque.

Rattler Cams™ Hydraulic Flat Tappet Camshafts Cam Part No.

Valve Lift w/1.60 Rockers IN EX

Near duplicate of the Ford 290HP/351W cam (FMC #C9OZ-6250-A).

Street Force™ Hydraulic Flat Tappet Camshafts Cam Part No.

Firing Order: 1•3•7•2•6•5•4•8

Duration @ .050” IN EX

Hyd. Hyd.

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

1

Cam Notes

289 227 235 .501 .501 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 297 235 243 .501 .480 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

305 243 251 .512 .528 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

204

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 205

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

American Muscle™ Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

91211 3 91216

Rev Kit

NA

Valve Spring, Retainer & Lock Kit

98412-K11

FORD SMALL BLOCK

Valve Springs

98412

Steel Titanium Retainers Retainers

97118

Valve Locks

Valve Seals

-93005 93316 25 97216 10 93017 10

Rocker Arms

90080 90081 7

Stud Girdles

90200 90201 7

Pushrods

Fuel Pump Distributor Pushrod Gear

Pushrods

Fuel Pump Distributor Pushrod Gear

95015

Lifters

Rev Kit

91211 3 91216

NA

98412-K11

91211 3 91216 91211 3 91216

NA NA

98412-K11 98412-K11

FORD SMALL BLOCK

Valve Springs

98412

98412 98412

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

95015 95015 95015

Lifters

Rev Kit

91211 3 91212

NA

98412-K11

91211 3 91212 91211 3 91212

NA NA

98436-K11 98412-K11

Valve Springs

98412

98436 98412

Steel Titanium Retainers Retainers

Valve Locks

Rocker Arms

Stud Girdles

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Valve Seals

97118

Components Notes: master note list on page 260 3 7 10 19

94210 19 94310 19

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 351W 1969-1996

Rattler Cams™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

94427

• 351W 1969-1996

Street Force™ Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

NA

Timing Set

Fax: 1300 350 454

90080 90081 7

90200 90201 7

Pushrods

95015 95015 95015

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

205

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 206

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

BOOST™ Hydraulic Flat Tappet Camshafts Cam Part No.

229141-14 229261-14 229421-14

Cam & Lifter Set Part No.

CL229141-14 CL229261-14 CL229421-14

FORD SMALL BLOCK

Duration Advertised IN EX

279

2400-6400

289

3200-6800

297

3800-7200

220011-14

220931-10 220991-08 222021-08 220041-08 220041-10 220041-12 220951-10 220051-08 220051-10 220051-12 222431-06 222431-08 222431-12 222051-08

225

235

Cam & Lifter Set Part No.

CL220011-14

CL220931-10 CL220991-08 CL222021-08 CL220041-08 CL220041-10 CL220041-12 CL220951-10 CL220051-08 CL220051-10

CL220051-12 CL222431-06 CL222431-08 CL222431-12 CL222051-08

269

1400-5200

267

1700-5700

267

2200-6000

275

1700-5700

275

1700-5800

275

1200-5400

275

2000-6000

277

2400-6600

277

2400-6600

277

2400-6600

272

2400-6400

272

2400-6600

272

2400-6600

277

2800-7000

Valve Lift w/1.60 Rockers IN EX

.523

.520

299

235

245

.520

.520

Lobe Separation Intake Angle Centerline

114 114

Blower, Fair idle. Hot Street 10+ Boost 2800+ Conv. Gears

305

243

251

.555

.560

114

263

Duration @ .050” IN EX

201

209

215

215

220

220

220

230

Valve Lift w/1.60 Rockers IN EX

.437

.448

Lobe Separation Intake Angle Centerline

114

110

.475

.475

.543

.543

110

106

108

.543

.563

108

High lift, dual pattern. Need 4 barrel, low gears & 2500+ stall.

275

221

221

.475

.475

108

221

221

.475

.475

110

275

221

221

.475

.475

285

221

231

.501

.501

110

289

223

235

.496

.520

223

235

.496

.520

104

110

1

1

Hot Street performance in 385-418. 9.5:1, 2400 stall suggested.

289

Hyd. Hyd.

Hyd. Hyd.

Hyd. Hyd.

106

108

Cam Notes

104

104

108

Street & Strip. Needs 4 barrel, headers & low gears.

Valve Lash IN EX

1,16

106

112

1

Hyd. Hyd.

Good low & mid-range horsepower. Needs 4 barrel & headers. Good idle & throttle response. Ok with small blower.

1

104

Good low & mid-range horsepower. Needs 4 barrel & headers.

275

1

Hyd. Hyd.

Good low & mid-range horsepower. Needs 4 barrel & headers.

277

Hyd. Hyd.

110

110

Firing Order: 1•3•7•2•6•5•4•8

Lopey idle. Excellent Street Performance cam.

267

Cam Notes

Hyd. Hyd.

Smooth idle, strong low end. High vacuum, good fuel economy.

269

Valve Lash IN EX

110

Blower, Fair idle. Series Street Rod. 12-15lbs Boost 3500+ Conv.

Duration Advertised IN EX

255

800-4500

Firing Order: 1•3•7•2•6•5•4•8

Blower, Good idle. 5-8lbs Boost 2200 Conv

• 351W 1969-1996

Hydraulic Flat Tappet Camshafts Cam Part No.

289

Duration @ .050” IN EX

106

Hyd. Hyd.

1,16

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Hyd. Hyd.

1

Good idle, Street/Strip Good mid range torque. 9.5:1, 2400 stall suggested.

289

223

235

.496

.520

112

108

Strong mid-range. Great E.T. Bracket cam. OK w/NOS.

272

224

224

.551

.551

106

Lopey idle, good low end & mid-range horsepower & torque.

272

224

224

.551

.551

108

Hot Street cam. 4 barrel & headers recommended.

272

224

224

.551

.551

112

277

230

230

.563

.563

108

1

102

Hyd. Hyd.

1,16

108

Hyd. Hyd.

1,16

104

Good idle, good mid range torque & horsepower. Needs 2400+ stall. Fair idle, Broad power band. Works well in heavy vehicles.

Hyd. Hyd.

104

Hyd. Hyd. Hyd. Hyd.

1,16 1,16

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 16 Lobes designed to take maximum advantage of .875” dia. lifter.

206

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 207

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

BOOST™ Hydraulic Flat Tappet Camshafts Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

912123

NA

98412-K11

912123 912123

NA NA

98436-K11 98412-K11

FORD SMALL BLOCK

Valve Springs

98412

98436 98412

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Lifters

Rev Kit

91211 3 91212

NA

98412-K11

91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212

NA NA NA NA NA NA NA NA NA NA

98412-K11 98412-K11 98412-K11 98412-K11 98412-K11 98412-K11 98412-K11 98412-K11 98412-K11 98412-K11

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

Valve Springs

98412

98412 98412 98412 98412 98412 98412 98412 98412 98412 98412

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118

-93005 93316 25 97216 10 93017 10

90080 90081 7

90200 90201 7

97118 97118 97118 97118 97118 97118 97118 97118

97118

-93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10 -93005 93316 25 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

90200 90201 7

97118

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

90080 90081 7

Pushrods

95015 95015 95015

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 351W 1969-1996

NA NA

Stud Girdles

97118

Hydraulic Flat Tappet Cam & Lifter Set Components Valve Spring, Retainer & Lock Kit

Rocker Arms

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95015 95015 95015 95015 95015 95015 95015 95015 95015 95015 95015

95198 95007 95198 95007 95198 95007 95198 95007

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

207

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 208

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Hydraulic Flat Tappet Camshafts Cam Part No.

222051-10 222141-08 222141-10 222591-08 222591-12 220961-08 220961-08 226461-10 221701-12 220971-08 222601-06 222601-08 220891-08 220891-10 220891-12 222901-12 220061-08 220061-12 222041-08 222401-10 221541-08 221541-10 229991

Cam & Lifter Set Part No.

CL222051-10 CL222141-08 CL222141-10 CL222591-08 CL222591-12 CL220961-08 CL220961-08 CL226461-10 CL221701-12 CL220971-08 CL222601-06 CL222601-08 CL220891-08 CL220891-10 CL220891-12 CL222901-12 CL220061-08 CL220061-12

CL222041-08 CL222401-10 CL221541-08 CL221541-10 NA

Duration Advertised IN EX

277

2800-7000

277

2500-6800

277

2500-6800

277

2500-6800

277

2600-6800

285

2600-6800

285

2600-6800

280

3000-7000

282

3000-7000

283

3000-6800

283

3000-6800

283

3000-6800

287

3200-7000

287

3200-7000

287

3200-7000

294

2300-6500

291

3200-7200

291

2600-6600

293

3400-6700

295

3200-6800

295

3400-7000

295

3400-7200

277

Duration @ .050” IN EX

230

230

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.563

.563

Lobe Separation Intake Angle Centerline

110

106

Strong power range from 3,500 up. Needs 4bbl., header & stall.

282

230

234

.563

.572

108

104

Lopey idle, broad power band, strong top end power.

282

230

234

.563

.572

110

106

Lopey idle, Strong mid range. Good throttle response. 2400+ stall.

287

230

240

.563

287

230

240

.563

285

231

231

.501

231

231

.501

233

241

.544

234

244

.572

.501

108

104

Hyd. Hyd.

106

Hyd. Hyd.

.592

112

108

.501

108

104

.565

110

.596

112

Lopey idle, Street/Strip or nostalgia. Likes headers & gears.

283

236

236

.583

Hyd. Hyd.

Hyd. Hyd.

Very aggressive ramp speeds, Oval track USMTS and IMCA modifieds.

291

1,16

104

Broad power range, extra performance in smaller engine.

288

Hyd. Hyd.

Hyd. Hyd.

108

Broad power range, extra performance in smaller engine.

285

Cam Notes

.592

Lopey idle, Hot Street/Brackets. 2500+ stall, 9.0:1+ CR. Hot Street & mild Bracket Racing.

Valve Lash IN EX

.583

108

108

Hyd. Hyd.

287

236

240

.583

.592

106

Hyd. Hyd.

104

Hyd. Hyd.

287

236

240

.583

.592

108

Lopey idle, good mid-range power. Needs 3200+ stall.

104

Hyd. Hyd.

293

240

246

.592

.601

108

102 104

Hyd. Hyd. Hyd. Hyd.

Rough idle, Hot Street/Bracket, great mid range & top end power. 3500+ stall.

293

240

246

.592

.601

110

106

Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 10.0-11.5:1 CR, 3500+ stall.

293

240

246

.592

.601

112

108

Hyd. Hyd.

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall.

300

241

247

.416

.437

112

Fair idle, Circle Track Lift Rule Only. Strong mid-range.

301

244

254

.596

.625

108

108

104

244

254

.596

.625

112

246

246

.601

.601

108

Hyd. Hyd.

295

248

248

.605

.605

110

301

248

254

.605

.625

108

248

254

.605

.625

110

Hydraulic Flat Tappet Special Order Camshaft.

1

1,16 1,16 1,16 1,16 1,16 1,16 1,16 1

1,16

104

Hyd. Hyd.

106

Hyd. Hyd.

106

Hyd. Hyd.

Serious Street/Strip. A favorite for 408+ ci. strokers. 10.5:1+ CR, 3500+ stall.

Custom Grind Camshaft

1

Hyd. Hyd.

Hyd. Hyd.

Rough idle, Serious Street/Strip. 10.5:1+ CR, good heads & exhaust. 3500+ stall.

301

1

104

108

Hot Street/Brackets. Needs 10.0:1+ CR, good heads & exhaust. 3500+ stall. E.T. Brackets. Strong mid & upper end power range.

1,16

1,16

Performance/Competition. Works well with small blower or NOS.

293

1,16

Hyd. Hyd.

Pro Street/Brackets, Strong mid & upper end power. 10.0:1+ CR.

301

1,16

Hyd. Hyd.

Lopey idle, Pro-Street & Bracket Racing profile. Needs 3200+ stall, good exhaust. Bracket or 1/4 to 3/8 mile 4bbl. Oval Track. Proven winner.

1,16

Hyd. Hyd.

1,16 1,16 1,16 1,16 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 16 Lobes designed to take maximum advantage of .875” dia. lifter.

208

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 209

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Hydraulic Flat Tappet Cam & Lifter Set Components Lifters

Rev Kit

91211 3 91212

NA

91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 3 91212 91211 91212

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95198 95007

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

90080 90081 7

90200 90201 7

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

90080 90081 7

90200 90201 7

NA NA NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 98412-K11

98412

97118

-93005 93316 25 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA NA NA NA NA NA NA NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 98412-K11

98412

97118

-93005 93316 25 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

NA NA NA

NA

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10

-98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 -98438 25 97118 -93005 93316 25 98438-K12 25 97128 10 97216 10 93017 10 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

95198 95007 95198 95007 95198 95007 95198 95007 95015

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95015

95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 95198 95007 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

209

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 210

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

228005-09S 228045-09S 228085-09S

Cam & Lifter Set Part No.

CL228005-09S 36 CL228045-09S 36 CL228085-09S 36

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

Valve Lift w/1.60 Rockers IN EX

229135-14S 229275-16S 229225-14S 229425-14S

CL229165-14S 36 CL229135-14S 36 CL229275-16S 36 CL229225-14S 36 CL229425-14S 36

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

Cam Notes

304 243 251 .565 .549 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider 229165-14S

Valve Lash IN EX

296 235 243 .565 .565 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 351W 1969-1996

Cam & Lifter Set Part No.

Lobe Separation Intake Angle Centerline

288 227 235 .560 .565 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•3•7•2•6•5•4•8

273

Duration @ .050” IN EX

221

221

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.544

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears.

287

225

235

.560

.571

114

110

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

285

235

233

.580

.576

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

1 1 1 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 36 Includes Lifter “Spider” Kit.

210

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 211

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Rattler Cams™ Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95203 95008

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7

95203 95008 95203 95008

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 351W 1969-1996

BOOST™ Retro-Fit Hydraulic Roller Camshafts Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95004 95004 95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

211

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 212

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

220225-12S 220315-10S 220315-12S 220235-10S 220235-12S 222765-13S 221275-08S 221275-10S 221275-12S 221275-14S 222725-10S 221145-10S 221145-12S

222745-12S 220245-10S 220245-12S 222755-08S 222755-12S 220325-08S 220325-10S 220325-12S 220525-10S 220525-12S

Cam & Lifter Set Part No.

CL220225-12S 36 CL220315-10S 36 CL220315-12S 36 CL220235-10S 36 CL220235-12S 36 CL222765-13S 36 CL221275-08S 36 CL221275-10S 36 CL221275-12S 36 CL221275-14S 36 CL222725-10S 36 CL221145-10S 36 CL221145-12S 36

CL222745-12S 36 CL220245-10S 36 CL220245-12S 36 CL222755-08S 36 CL222755-12S 36 CL220325-08S 36 CL220325-10S 36 CL220325-12S 36 CL220525-10S 36 CL220525-12S 36

Duration Advertised IN EX

260

800-4200

262

1000-4400

262

1000-4400

266

1000-4800

266

1000-5000

270

1500-5500

270

1200-5600

270

1200-5600

270

1200-5600

270

1200-5600

272

1800-5800

272

2000-6000

272

2000-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

266

Duration @ .050” IN EX

207

213

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.480

.496

Lobe Separation Intake Angle Centerline

268

209

215

.496

.501

268

209

215

.496

.501

Improved throttle response & low end torque.

272

213

219

.517

.517

213

219

.517

.517

217

217

.496

.496

1,23

Hyd. Hyd.

112

108

Hyd. Hyd.

110 110 112

106 106 108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

Hyd. Hyd.

108

Fair idle, good low & mid-range performance increase.

272

Cam Notes

112

Great daily usage, smooth idle, great fuel economy. Improved throttle response & low end torque.

Valve Lash IN EX

113

109

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair dle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

110 114 110

106 110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110 112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.533

.544

108

Fair idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

108 106 108

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

108 106 108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

286

227

233

.597

.597

112

108

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.

1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23 1,23

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 36 Includes Lifter “Spider” Kit.

212

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 213

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

213

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 214

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshafts

Small Base - for Use With OE Style Hydraulic Roller Lifters & Spider Cam Part No.

220305-08S 220255-08S 220255-10S 220255-12S 222735-10S 222735-12S 221815-10S 220275-10S 220275-12S 223365-10S 220335-10S 220335-12S 220355-10S 220355-12S 224455-12S 229994

Cam & Lifter Set Part No.

CL220305-08S 36 CL220255-08S 36 CL220255-10S 36 CL220255-12S 36 CL222735-10S 36 CL222735-12S 36 CL221815-10S 36 CL220275-10S 36 CL220275-12S 36 CL223365-10S 36 CL220335-10S 36 CL220335-12S 36 CL220355-10S 36 CL220355-12S 36 CL224455-12S 36 NA

Duration Advertised IN EX

284

2400-6000

284

2400-6000

284

2400-6000

284

2400-6200

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6700

304

3000-7000

304

3000-7000

306

3200-7200

284

Duration @ .050” IN EX

231

231

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.544

Lobe Separation Intake Angle Centerline

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.544

.565

108

104

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

294

235

241

.581

.581

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft, Small Base Circle

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 36 Includes Lifter “Spider” Kit.

214

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 215

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Small Base Camshaft Components Lifters

Rev Kit

91213 3 91213FB

NA

91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 3 91213FB 91213 91213FB

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 95004 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

215

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 216

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Rattler Cams™ Retro-Fit Hydraulic Roller Camshafts for Use With Tie-Bar Style Hydraulic Roller Lifters

Cam Part No.

228005-09 228045-09 228085-09

Cam & Lifter Set Part No.

CL228005-09 CL228045-09 CL228085-09

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

229135-14 229275-16 229225-14 229425-14

CL229165-14 CL229135-14 CL229275-16 CL229225-14 CL229425-14

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

Valve Lash IN EX

Cam Notes

304 243 251 .565 .549 109 103 Hyd. Hyd. 1 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

for Use With Tie-Bar Style Hydraulic Roller Lifters

229165-14

Lobe Separation Intake Angle Centerline

296 235 243 .565 .565 109 103 Hyd. Hyd. 1 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

• 351W 1969-1996

Cam & Lifter Set Part No.

Valve Lift w/1.60 Rockers IN EX

288 227 235 .560 .565 109 103 Hyd. Hyd. 1 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears.

BOOST™ Retro-Fit Hydraulic Roller Camshafts Cam Part No.

Firing Order: 1•3•7•2•6•5•4•8

273

Duration @ .050” IN EX

221

221

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.544

Lobe Separation Intake Angle Centerline

114

110

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears.

287

225

235

.560

.571

114

110

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

285

235

233

.580

.576

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

216

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 217

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Rattler Cams™ Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

90200 90201 7

95205 95010

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

FORD SMALL BLOCK

90080 90081 7

95205 95010 95205 95010

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 351W 1969-1996

BOOST™ Retro-Fit Hydraulic Roller Camshafts Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260 912603 912603

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95003 95003 95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

217

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 218

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshafts

for Use With Tie-Bar Style Hydraulic Roller Lifters

Cam Part No.

220225-12 220315-10 220315-12 220235-10 220235-12 222765-13 221275-08 221275-10 221275-12 221275-14 222725-10 221145-10 221145-12

222745-12 220245-10 220245-12 222755-08 222755-12 220325-08 220325-10 220325-12 220525-10 220525-12

Cam & Lifter Set Part No.

CL220225-12 CL220315-10 CL220315-12 CL220235-10 CL220235-12 CL222765-13 CL221275-08 CL221275-10 CL221275-12 CL221275-14 CL222725-10 CL221145-10 CL221145-12

CL222745-12 CL220245-10 CL220245-12 CL222755-08 CL222755-12

CL220325-08 CL220325-10 CL220325-12 CL220525-10 CL220525-12

Duration Advertised IN EX

260

800-4200

262

1000-4400

262

1000-4400

266

1000-4800

266

1000-5000

270

1500-5500

270

1200-5600

270

1200-5600

270

1200-5600

270

1200-5600

272

1800-5800

272

2000-6000

272

2000-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

266

Duration @ .050” IN EX

207

213

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.480

.496

Lobe Separation Intake Angle Centerline

268

209

215

.496

.501

268

209

215

.496

.501

Improved throttle response & low end torque.

272

213

219

.517

.517

213

219

.517

.517

217

217

.496

.496

1

Hyd. Hyd.

112

108

Hyd. Hyd.

110

106

110

106

112

108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

Hyd. Hyd.

108

Fair idle, good low & mid-range performance increase.

272

Cam Notes

112

Great daily usage, smooth idle, great fuel economy. Improved throttle response & low end torque.

Valve Lash IN EX

113

109

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

Rough idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

110

106

114

110

110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110

225

231

.533

.544

106

112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

108

108

108

Lopey idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

108 106 108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

286

227

233

.597

.597

112

108

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

218

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 219

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 91168 3 91260 912603 912603

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7

Pushrods

95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

219

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 220

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshafts

for Use With Tie-Bar Style Hydraulic Roller Lifters

Cam Part No.

220305-08 220255-08 220255-10 220255-12 222735-10 222735-12 221815-10 220275-10 220275-12 223365-10 220335-10 220335-12 220355-10 220355-12 224455-12 229995

Cam & Lifter Set Part No.

CL220305-08 CL220255-08 CL220255-10 CL220255-12 CL222735-10 CL222735-12 CL221815-10 CL220275-10 CL220275-12 CL223365-10 CL220335-10 CL220335-12 CL220355-10 CL220355-12 CL224455-12 NA

Duration Advertised IN EX

284

2400-6000

284

2200-6000

284

2200-6000

284

2200-6200

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6700

304

3000-7000

304

3000-7000

306

3200-7200

284

Duration @ .050” IN EX

231

231

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.544

Lobe Separation Intake Angle Centerline

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

288

231

235

.544

.565

108

104

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

294

235

241

.581

.581

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Cam Notes: master note list on page 260 1

Stock (O.E.) valve springs cannot be used. Some items are not legal for sale or use on any pollution controlled motor vehicle

220

Phone: 1300 350 351

Fax: 1300 350 454

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 221

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1969-1996

Retro-Fit Hydraulic Roller Camshaft Components Lifters

Rev Kit

91168 3 91260

NA

91168 3 91260 91168 3 91260 91168 3 91260 912603 912603 912603 912603 912603 912603 912603 912603 912603 912603 912603 91168 91260

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 90200 90201 7 --

Pushrods

95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 95003 --

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required.

Web: www.fabre.com.au

221

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 222

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1985-1996

Rattler Cams™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

228005-09 228045-09 228085-09

Cam & Lifter Set Part No.

CL228005-09E17 CL228005-0918 CL228045-09E17 CL228045-0918 CL228085-09E17 CL228085-0918

FORD SMALL BLOCK

Duration Advertised IN EX

280

1800-5500

288

2000-5700

296

2400-6100

Duration @ .050” IN EX

Valve Lift w/1.60 Rockers IN EX

229165-14 229135-14 229275-16 229225-14 229425-14

Valve Lash IN EX

Cam Notes

288 227 235 .560 .565 109 103 Hyd. Hyd. 1,17,18 Rattler™, Choppy idle. High Performance Street, stock converter ok, best with 1800+ and gears. 296 235 243 .565 .565 109 103 Hyd. Hyd. 1,17,18 Big Mama Rattler™, Lopey idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall. 304 243 251 .565 .549 109 103 Hyd. Hyd. 1,17,18 Big Daddy Rattler™, Rough idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

• 351W 1985-1996

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

Lobe Separation Intake Angle Centerline

Cam & Lifter Set Part No.

CL229165-14E17 CL229165-1418 CL229135-14E17 CL229135-1418 CL229275-16E17 CL229275-1618 CL229225-14E17 CL229225-1418 CL229425-14E17 CL229425-1418

Duration Advertised IN EX

273

2000-5800

277

2200-6400

287

2600-6800

287

2800-6800

307

2400-6200

Duration @ .050” IN EX

Valve Lift w/1.60 Rockers IN EX

Lobe Separation Intake Angle Centerline

Valve Lash IN EX

Cam Notes

Hyd. Hyd.

1,17,18

273 221 221 .544 .544 114 110 Hyd. Hyd. 1,17,18 Turbo, Good idle. High Performance Street, stock converter ok, best with 2000+ and gears. 287

225

235

.560

.571

114

110

Blower, Good idle. Street or Street/Strip. Needs 9.0:1 compression, 2500+ stall.

285

235

233

.580

.576

116

112

Hyd. Hyd.

Turbo, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

297

235

245

.608

.597

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

317

255

265

.640

.640

114

110

Hyd. Hyd.

Blower, Fair idle. Pro Street or Street/Strip. Needs 9.5:1 compression, 2800+.

1,17,18 1,17,18 1,17,18

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

222

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 223

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1985-1996

Rattler Cams™ Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

90200 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

Rev Kit

91213 3 91168 3,33

NA

91213 3 912603,33

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

Valve Spring, Retainer & Lock Kit

95203 95008 95203 95008

Valve Springs

Steel Titanium Retainers Retainers

Valve Locks

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

• 351W 1985-1996

Components Notes: master note list on page 260 3 7 10 19

95203 95008

90080 90081 7

Lifters

91213 3 912603,33

90200 90201 7

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

BOOST™ Hydraulic Roller Camshafts for OE Roller Applications

91213 3 91168 3,33

Pushrods

NA

FORD SMALL BLOCK

91213 3 91168 3,33

Stud Girdles

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA

94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

223

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 224

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1985-1996

Hydraulic Roller Camshafts for OE Roller Applications Cam Part No.

220225-12 220315-10 220315-12 220235-10 220235-12 222765-13 221275-08 221275-10 221275-12 221275-14 222725-10 221145-10 221145-12

222745-12 220245-10 220245-12 222755-08 222755-12 220325-08 220325-10 220325-12 220525-10 220525-12 220305-08

Cam & Lifter Set Part No.

CL220225-12E17 CL220225-1218 CL220315-10E17 CL220315-1018 CL220315-12E17 CL220315-1218 CL220235-10E17 CL220235-1018 CL220235-12E17 CL220235-1218 CL222765-13E17 CL222765-1318 CL221275-08E17 CL221275-0818 CL221275-10E17 CL221275-1018 CL221275-12E17 CL221275-1218 CL221275-14E17 CL221275-1418 CL222725-10E17 CL222725-1018 CL221145-10E17 CL221145-1018 CL221145-12E17 CL221145-1218 CL222745-12E17 CL222745-1218 CL220245-10E17 CL220245-1018 CL220245-12E17 CL220245-1218 CL222755-08E17 CL222755-0818 CL222755-12E17 CL222755-1218 CL220325-08E17 CL220325-0818 CL220325-10E17 CL220325-1018 CL220325-12E17 CL220325-1218 CL220525-10E17 CL220525-1018 CL220525-12E17 CL220525-1218 CL220305-08E17 CL220305-0818

Duration Advertised IN EX

260

800-4200

262

1000-4400

262

1000-4400

266

1200-4800

266

1200-5000

270

1500-5500

270

1600-5600

270

1600-5600

270

1600-5600

270

1600-5600

272

1800-5800

272

1800-6000

272

1800-6000

278

2000-6000

278

2000-6100

278

2000-6100

278

2000-6200

278

2000-6200

278

1800-6200

278

2000-6200

278

2000-6200

280

2200-6400

280

2200-6400

284

2400-6000

266

Duration @ .050” IN EX

207

213

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.480

.496

Lobe Separation Intake Angle Centerline

268

209

215

.496

.501

268

209

215

.496

.501

Improved throttle response & low end torque.

272

213

219

.517

.517

108

Hyd. Hyd.

1,17,18

112

108

Hyd. Hyd.

1,17,18

110 110

Fair idle, good low & mid-range performance increase.

272

213

219

.517

.517

112

106 106 108

Good idle, Off-Road & Street Performance. 9.0:1 CR advised.

270

217

217

.496

.496

113

109

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Good idle, strong low end & mid-range performance. Needs 2800+ stall.

278

217

225

.528

.533

108

104

Hyd. Hyd.

112

108

Hyd. Hyd.

Lopey to fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Good idle. Good torque & power. 1800+ stall.

278

217

225

.528

.533

Fair idle. Good torque & power. 1800+ stall.

272

219

219

.544

.544

110 114 110

106 110

106

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Fair idle, strong Street Performance. Requires 9.0+ CR, 5-speed or 2800+ stall.

278

219

225

.544

.533

110

106

Hyd. Hyd.

Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.

278

219

225

.544

.533

112

108

Hyd. Hyd.

Good idle, good mid range power. Good vacuum. 9.5-10.5:1 CR, 2500+ stall.

278

225

225

.533

Best with 5-speed or 2200-2500 stall.

282

225

229

.533

.533 .512

Fair idle, Street/Strip. Auto OK with 2500+ stall.

282

225

229

.533

.512

112 110 112

Fair idle, Street & mild Performance usage. Crisp throttle.

284

225

231

.533

.544

108

Fair idle, Street & Mild Performance usage. Crisp throttle.

284

225

231

.533

.544

112

Fair idle, Street & Mild Performance usage. Crisp throttle.

286

225

233

.560

.565

108

Choppy idle, Street performance usage. 2500+ stall.

286

225

233

.560

.565

110

108 106 108

225

233

.560

.565

112

227

233

.597

.597

110

Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

104

Hyd. Hyd.

108 106 108

Fair idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

Hyd. Hyd.

104

Rough idle, Street/Strip performance. Strong mid-range. 2500+ stall.

286

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Hot Street/Strip, excellent mid range performance. 2500+ stall, gears, intake.

286

227

233

.597

.597

112

108

Hyd. Hyd.

Good idle, good all around performance. Good vacuum. 9.5:1+ CR, 2500+ stall & gears.

284

231

231

.544

.544

Cam Notes

112

Great daily usage, smooth idle, great fuel economy. Improved throttle response & low end torque.

Valve Lash IN EX

108

104

Choppy idle, strong low & mid range performance. 2500+ stall.

Hyd. Hyd.

1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

224

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 225

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1985-1996

Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

225

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 226

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1985-1996

Hydraulic Roller Camshafts for OE Roller Applications (cont.) Cam Part No.

220255-08 220255-10 220255-12 222735-10 222735-12 221815-10 220275-10 220275-12 223365-10 220335-10 220335-12 220355-10 220355-12 224455-12 229995

Cam & Lifter Set Part No.

CL220255-08E17 CL220255-0818 CL220255-10E17 CL220255-1018 CL220255-12E17 CL220255-1218 CL222735-10E17 CL222735-1018 CL222735-12E17 CL222735-1218 CL221815-10E17 CL221815-1018 CL220275-10E17 CL220275-1018 CL220275-12E17 CL220275-1218 CL223365-10E17 CL223365-1018 CL220335-10E17 CL220335-1018 CL220335-12E17 CL220335-1218 CL220355-10E17 CL220355-1018 CL220355-12E17 CL220355-1218 CL224455-12E17 CL224455-1218 NA

Duration Advertised IN EX

284

2200-6000

284

2200-6000

284

2200-6200

288

2400-6400

288

2400-6400

290

2500-6500

294

2600-6600

294

2600-6600

300

2600-6600

300

2800-6700

300

2800-6800

304

3200-7000

304

3200-7000

306

3400-7200

288

Duration @ .050” IN EX

231

235

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.544

.565

Lobe Separation Intake Angle Centerline

108

104

Valve Lash IN EX

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

110

106

Hyd. Hyd.

Rough idle, Street/Strip performance. Great low to mid-range torque & power.

288

231

235

.544

.565

112

108

Fair idle, performance usage. Great mid-range torque & horsepower.

294

235

241

.581

.581

110

106

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

294

235

241

.581

.581

112

108

Lopey idle, Hot Street & Bracket Racing. 10.0:1-up CR advised.

298

237

245

.597

.597

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Lopey idle, Hot Street/Bracket, good mid range. 9.5-10.5:1 CR, 2800+ stall.

300

241

247

.581

.603

110

106

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

241

247

.581

.603

112

108

Rough idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

300

247

247

.603

.603

110

106

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Rough idle, Street/Strip, good mid range performance. 3200+ stall, good intake.

304

247

251

.576

.576

110

Hot Street/Brackets. Requires aftermarket heads, 3500+ stall.

304

247

251

.576

.576

112

106 108

Lopey idle, Hot Street & Bracket Racing. 10.5:1-up CR advised.

310

251

257

.592

.592

110

Upper mid-range & top end power. Needs 11.0:1+ CR.

310

251

257

.592

.592

112

Upper mid-range & top end power. Needs 11.0:1+ CR.

312

253

259

.640

.640

112

Best with big cubic inch. Needs 11.0:1+ CR. good heads.

Custom Grind Camshaft

Retro-Fit Hydraulic Roller Special Order Camshaft.

106 108 108

Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd. Hyd.

Hyd. Hyd.

Cam Notes

1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1,17,18 1

Cam Notes: master note list on page 260

1 Stock (O.E.) valve springs cannot be used. 17 Cam & Lifter Sets with “E” suffix feature OE style (91213) lifters. 18 Cam & Lifter Sets without suffix feature tie bar lifters.

226

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 227

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1985-1996

Hydraulic Roller Camshafts for OE Roller Applications Components Lifters

Rev Kit

91213 3 91168 3,33

NA

91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 91213 3 91168 3,33 --

Valve Spring, Retainer & Lock Kit

Valve Springs

Steel Titanium Retainers Retainers

Valve Seals

Rocker Arms

Stud Girdles

Pushrods

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 95302-16 90201 7

NA NA NA NA NA NA NA NA NA NA NA

NA

98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 98438-K12 25 98438 25 97128 10 97216 10 93017 10 93316 25 --

--

--

Components Notes: master note list on page 260 3 7 10 19

Valve Locks

--

--

Included in Cam & Lifter Sets. Requires 7/16” rocker studs. 10° Valve lock Angle, must use matching retainers/locks. Fits factory 1-pc eccentric. For 2-pc eccentric use 94212 or 94312.

Phone: 1300 350 351

Fax: 1300 350 454

--

90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 90080 90081 7 --

90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 90200 95302-16 90201 7 --

--

Fuel Pump Distributor Pushrod Gear

Timing Set

NA

94427

94210 19 94310 19

NA

94427

94210 19 94310 19

NA NA NA NA NA NA NA NA NA NA NA NA

NA

94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427 94427

94427

94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19 94210 19 94310 19

25 Machining Required. 33 Tie bar style lifters.

Web: www.fabre.com.au

227

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 228

CAMSHAFTS

FORD SMALL BLOCK

• 351W 1969-1996

Mechanical Flat Tappet Camshafts Cam Part No.

222342-10 220542-08 221332-08 220102-06 220102-08 220102-12 221002-08 221362-06 222352-06 221052-08 220642-06 220642-08 222372-08 222372-10 222362-08 221792-06 222532-06 222322-08 222332-10 229992

Cam & Lifter Set Part No.

CL222342-10 CL222342-10DL 4 CL220542-08 CL220542-08DL 4 CL221332-08 CL221332-08DL 4 CL220102-06 CL220102-06DL 4 CL220102-08 CL220102-08DL 4 CL220102-12 CL220102-12DL 4 CL221002-08 CL221002-08DL 4 CL221362-06 CL221362-06DL 4 CL222352-06 CL222352-06DL 4 CL221052-08 CL221052-08DL 4 CL220642-06 CL220642-06DL 4 CL220642-08 CL220642-08DL 4 CL222372-08 CL222372-08DL 4 CL222372-10 CL222372-10DL 4 CL222362-08 CL222362-08DL 4 CL221792-06 CL221792-06DL 4 CL222532-06 CL222532-06DL 4 CL222322-08 CL222322-08DL 4 CL222332-10 CL222332-10DL 4 NA

Duration Advertised IN EX

265

2200-5800

258

2000-5600

264

2400-6000

275

2600-6200

275

2600-6200

275

2500-6300

279

2600-6400

272

2800-6800

281

2800-6800

283

3000-7000

278

3200-7200

278

3200-7200

285

3400-7400

285

3600-7600

289

3600-7400

284

3800-7600

295

4000-7800

295

4000-8000

303

4400-8200

265

Duration @ .050” IN EX

230

230

Firing Order: 1•3•7•2•6•5•4•8

Valve Lift w/1.60 Rockers IN EX

.512

.512

Lobe Separation Intake Angle Centerline

110

106

Good Street cam, broad power range. 2200+ stall recommended.

264

230

236

.561

.574

108

104

Fair idle, good low to mid range performance. 9.5:1+ CR, 2500+ stall.

268

236

240

.574

.590

108

104

Street/Strip, high torque with mid range & top end power. 2500+ stall.

281

240

246

.539

.555

106

102

Hot Street/Brackets. Lopey idle. Needs higher CR & gears.

281

240

246

.539

.555

108

104

Hot Street/Bracket. Needs 10.0+ CR, 3200+ stall & gears.

281

240

246

.539

.555

112

108

Valve Lash IN EX

.022

279

244

244

.544

.544

108

104

280

244

252

.501

.501

106

102

Oval Track, .500” Lift Rule, Best on tight short tracks. Low vacuum.

287

246

252

.549

.565

106

102

Fair idle, Street/Strip in light car. 10.0:1 CR, 4.10 or lower gears.

283

248

248

.544

.544

Street/Strip, powerful through entire rpm range.

284

250

256

.501

.501

Oval Track, .500” Lift Rule, 1/4 to 3/8 mile.

284

250

256

.501

.501

108

104

106

102

108

104

.018

1,16,34

.022

.022

1

.018 .022

.022

.018

.022

.022

.022

.022 .016 .016

291

250

256

.560

.571

108

104

291

250

256

.560

.571

110

106

.022

.022

Rough idle, excellent mid-range. Needs 11.0:1+ CR, 2500+ stall & good heads.

295

254

260

.587

.592

108

292

256

264

.501

.501

106

.022

1

.016 .016

299

260

264

.592

.592

106

Bracket Race or 3/8 to 1/2 mile Oval Track with fast corners.

303

260

268

.592

.587

108

Rough idle, Bracket favorite. Needs 11.0:1 CR & 4000+ stall.

313

268

278

.587

.612

110

.022

102

.022

.022

104

106

.022

.022

1

1,16,34 1,16,34 1

.022

.022

.016

1

1,34

.022

102

Oval Track, .500” Lift Rule, fast banked 1/4 to 3/8 mile.

1

.016

104

Rough idle, Bracket cam. Best with 11.0:1+ CR & 4000+ stall.

1

.022

.022 .016

1,16,34

.022

Oval Track, .500” Lift Rule, 1/4-3/8 mile 4bbl. Good mid range torque. 11.0-12.5:1 CR. Rough idle, needs good induction system. Good Oval Track cam.

1

.018

Fair idle, Bracket E.T., good mid range torque & power. 11.0:1+ CR, 3500+ stall. Rough idle, super mid-range performance. Needs 11.0:1 CR-up.

.022

Cam Notes

1

.016

1,34

.022

1

.022

Bracket Racer special. Super strong mid-range & top end. Great in big cubic inch.

Custom Grind Camshaft

1

Mechanical Flat Tappet Special Order Camshaft.

1 1 1

Cam Notes: master note list on page 260 1 4 16 34

228

Stock (O.E.) valve springs cannot be used. Direct Lube Lifters Included in Cam & “Direct Lube” Lifter (DL) Sets. Lobes designed to take maximum advantage of .875” dia. lifter. Provisions for increased oiling recommended.

Phone: 1300 350 351

Fax: 1300 350 454

Some items are not legal for sale or use on any pollution controlled motor vehicle

Web: www.fabre.com.au

Email: info@fabre.com.au


Howards_2016_home_pg_shift.qxp_2005Howardscurrent vers .QXD4 copy 8/29/16 9:18 AM Page 229

IMPORTANT NOTICE: All valve train components in this catalog are listed as suggestions only. It is the responsibility of the purchaser and the installer to verify that all the components are correct for the their application before installation. Proper assembly requires that the installer measure all tolerances for proper fit and clearances. Howards Cams & Racing Components will assume no liability for any errors in component selection or installation.

FORD SMALL BLOCK

• 351W 1985-1996

Mechanical Flat Tappet Camshafts Components Lifters

Rev Kit

Valve Spring, Retainer & Lock Kit

91215 3 91218 4

NA

98437-K12

98437

97128 10 97216 10 93017 10 93316 25

NA

98437-K12

98437

97128 10 97216 10 93017 10 93316 25

91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 3 91218 4 91215 91218

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA

98436-K11

98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98437-K12 98445-K12 98437-K12 98445-K12 98445-K12 98445-K12 --

Valve Springs

Steel Titanium Retainers Retainers

98436

98437 98437 98437 98437 98437 98437 98437 98437 98437 98437 98437 98445 98437 98445 98445

98445 --

97118

Rocker Arms

Stud Girdles

90080 90081 7

90200 90201 7

97128 10 97216 10 93017 10 93316 25

90080 90081 7

90200 90201 7

97128 10 97216 10 93017 10 93316 25 97128 10 97216 10 93017 10 93316 25 97128 10 97216