INTAKE SYSTEM
CARB STUD KITS The best way to make sure that carburetors stay perfectly sealed to the intake manifold is through the use of ARP’s carb studs. They’re offered in a variety of heights to accommodate most any combination of carb and spacer, and are available in 8740 chrome moly with a black oxide finish or ARP Stainless. Special ARP Pro Series NASCAR type stud kits have one of the studs drilled to facilitate sealing the carburetor in the engine by race officials. All carb studs include a nut starter nose (except where noted) and kits come with hex nuts and washers. Application
Qty.
Size
O.A.L.
Black Oxide
Stainless
Standard
4
5/16
1.700
200-2401
400-2401
Standard with Moroso #64919 return spring kit
4
5/16
1.700 (2) & 2.050 (2)
200-2421
400-2421
300-2421
Standard with Moroso #64927 return spring kit
4
5/16
1.700 (3) & 2.050 (1)
200-2424
400-2424
300-2424
1/2˝ spacer
4
5/16
2.225
200-2403
400-2403
1˝ spacer
4
5/16
2.700
200-2402
400-2402
1˝ spacer with Moroso #64919 return spring kit
4
5/16
2.700 (2) & 3.050 (2)
200-2420
400-2420
300-2420
1˝ spacer with Moroso #64927 return spring kit
4
5/16
2.700 (3) & 3.050 (1)
200-2423
400-2423
300-2423
2˝ spacer
4
5/16
3.700
200-2404
3˝ spacer
4
5/16
4.700
200-2405
1-1 /4˝ Moroso spacer
4
5/16
3.200
200-2408
2˝ Moroso spacer
8
5/16
1.250* (4) & 1.700 (4)
200-2409
2˝ Moroso spacer with Moroso #64919 return spring kit
8
5/16
2˝ Moroso spacer with Moroso #64927 return spring kit
8
5/16
Dominator with 1/2˝ or 1˝ spacer
4
5/16
Dominator carb stud, no spacer
4
Dominator carb stud, with spacer
1.250* (4) & 1.700 (2) & 2.050 (2) 1.250* (4) & 1.700 (3) & 2.050 (1)
Pro Series
300-2404
400-2408
200-2419
400-2419
300-2419
200-2422
400-2422
300-2422
3.200
200-2412
400-2412
5/16
2.225
200-2414
400-2414
4
5/16
4.400
200-2415
HP Dominator carb stud, no spacer
4
5/16
2.225
200-2416
HP Dominator carb stud with 1/2˝ spacer
4
5/16
2.700
200-2417
HP Dominator carb stud with 1˝ spacer
4
5/16
3.200
200-2418
Standard (drilled for NASCAR wire seal)
4
5/16
1.700
300-2401
2˝ spacer (drilled for NASCAR wire seal)
8
5/16
2.225 (1) & 1.700 (7)
300-2406
1˝ spacer (drilled for NASCAR wire seal)
4
5/16
2.700
300-2403
1/2˝ spacer (drilled for NASCAR wire seal)
4
5/16
2.225
300-2402
1˝ Moroso spacer (drilled for NASCAR wire seal)
4
5/16
2.700
300-2407
1-1/4˝ Moroso spacer (drilled for NASCAR wire seal)
4
5/16
3.200
300-2408 300-2409
2˝ Moroso spacer (drilled for NASCAR wire seal)
8
5/16
1.250* (4) & 1.700 (1) & 1.700 (1)
Quadrajet (all), with 1/4˝ base gasket
4
5/16
1.700 (2) & 4.400 (2)
200-2413
400-2413 *Does not have starter nose
COIL BRACKET BOLTS Add a touch of class to your coil bracket installation with an ARP bolt kit. Available in black oxide finished chrome moly or rust-proof stainless steel, as well as with a conventional hex head or 12-point (great for tight, hard-to-reach coils). Washers included.
Application
Black Oxide Hex 12-Point
Hex
Stainless 12-Point
Chevrolet
130-2302
130-2301
430-2302
430-2301
Chevrolet LS Series small block
134-2302
134-2301
434-2302
434-2301
Chevrolet 6.2L (LT1/LT4)
134-2304
134-2303
434-2304
434-2303
Chrysler 5.7l & 6.1L Hemi
140-2302
140-2301
440-2302
440-2301
Ford Windsor
150-2302
150-2301
450-2302
450-2301
78
Red part numbers indicate new items
800-826-3045 Phone: 1300 350 351
Fax: 1300 350 454
Web: www.fabre.com.au
Email: info@fabre.com.au