Page 1

Product Catalog

1


Create smart solutions with us!

Maximise Knowledge Our customers are the specialists on their own machines whereas we are the specialists on control systems. Taking most out of both requires close co-operation and the reward is seen as lower total cost throughout the whole lifecycle of our customer’s product.

Speed up the Project The Exertus architecture is designed for fast development where the repeating tasks are built into programming environment and into products. Thus there is no need for programmer to spend time to writing functions such as reading joystick, controlling proportional valve with current feedback or controlling hydrostatic drive he just configures them. Our programming environment allows also multiple programmers to work on the same project simultaneously.

Optimise Production Well made control system simplifies also production of the customers machine. Application is transferred to master controller which distiributes needed settings and parts of the control algorithm to other controllers in the system. The application helps on calibrating the actuators in the system and stores the values as factory defaults. Before shipping out a copy of the machine application and parameter settings is stored to memory stick.

Simplify Support and Maintenance Control system not only controls the machine but it also helps its operator. It tells to him why his command can not be executerd if that is the case. On problem cases diagnostics functions help on searching the source of problems, The intelligent slave controllers can be replaced by the operator as the master controller keeps their settings in shape.

2

www.exertus.fi


CO-OPERATION

BUILT-IN FUNCTIONS

VIRTUAL SIMULATION FAST PROGRAM DEPLOYMENT

OPERATOR ASSISTING

CALIBRATION WIZARDS

TEAM PROGRAMMING SIMPLE MAINTENANCE 3


Multi Information Controller MIC1100S

The MIC1100S is embedded Linux based high end controller with loads of features. It combines traditional I/O controller, display controller and data logger with set of interfaces such as Ethernet, USB, RS232 and CAN. It also enables showing multiple camera pictures on attached remote display(s). Optionally it can be equipped with RF interface. It is commonly used as NMT master for machine automation system. It can store and load application to the nodes in the system making commissioning and maintenance easier.

MIC1100S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces:

Other: Optional:

4

www.exertus.fi

9—32VDC -40°C …. +85°C Aluminium, IP67 145mm x 195mm x 35mm 1,3kg 40 (DI, PI, AI, DO, PWM) 2 x CAN 2.0B, ISO 11898 1 x CAN 2.0B isolated, ISO 11898 2 x USB 1 x 10/100 BaseT Ethernet 4 x Composite video inputs 2 x RS232 Real Time Clock Internal SD memory card RF interface


8.4” and 12.1” Remote Displays RD084S2 and RD121S2

The Remote Displays are designed for use with MIC1100S. They are designed for operation in wide temperature range with high protection class. Due to single cable installation they are easy to position to convenient location in the machine.

RD084S2 Operating temperature range: Housing: Dimensions (w x h x d): Weight: Mounting: Display: Resolution: Brightness: Viewing angle:

-30°C …. +85°C Aluminium, IP67 225 mm x 163,5 mm x 51 mm 1,3 kg VESA 75 8,4” TFT Color 800 x 600 450 cd / m2 80°

RD121S2 Operating temperature range: Housing: Dimensions (w x h x d): Weight: Mounting: Display: Resolution: Brightness: Viewing angle: Options:

-30°C …. +85°C Aluminium, IP67 301 mm x 237 mm x 51 mm 2,7 kg VESA 75 12,1” TFT Color 800 x 600 450 cd / m2 80° Capacitive touch screen

5


Multi Information Display MID070S The MID070S is embedded Linux based display controller with rich set of features. It combines the traditional I/O controller, 7” Colour Display, Data Logger with rich set of interfaces such as Ethernet, USB, RS232 and CAN interfaces. It also enables showing multiple camera pictures on display. It is commonly used as NMT master for machine automation system. It can store and load the application and settings to other nodes in the system making manufacturing and maintenance easier for OEMs. Optionally it can be equipped with RF interface or with internal SD memory card.

MID070S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Mounting: Display: Resolution: I/O lines: Interfaces:

Other: Optional:

6

www.exertus.fi

9—32VDC -40°C …. +70°C Aluminium, IP67 153mm x 203mm x 42mm 1,4kg Panel / RAM 7” WVGA color TFT 800 x 480 40 (DI, PI, AI, DO, PWM) 2 x CAN 2.0B, ISO 11898 2 x USB 1 x 10/100 BaseT Ethernet 4 x Composite video inputs 2 x RS232 Real Time Clock Internal SD memory card RF interface


Compact Display Controller CDC1700S1

CDC1700S1 is compact-sized combined display and I/O controller. It is developed for harsh environment with IP67 protection class and with wide operating temperature range. It is commonly used as NMT master in machine automation system. It can store and load the application and settings to other nodes in the system making manufacturing easier for OEMs.

CDC1700S1 Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Mounting: Display: Resolution: I/O lines: Interfaces:

Optional:

9—36VDC -30°C …. +60°C Aluminium, IP67 167mm x 138mm x 32mm 0,95kg RAM (with RAM fixing frame) 5,7” VGA color TFT 640 x 480 31 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898 1 x USB 1 x RS232 2nd CAN 2.0B, ISO 11898

7


Compact Controller with Display CCD1100S

The CCD1100S is compact and versatile I/O controller with information display. It has 38 configurable I/O lines. The built-in Real Time Clock can be used for instance for logging events with time stamp. In addition to flash there is also battery backed memory for storing fast changing information. Optionally it can be equipped with RF interface.

CCD1100S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Mounting: Display: Resolution: I/O lines: Interfaces: Other: Optional:

8

www.exertus.fi

9—32VDC -20°C …. +60°C Aluminium, IP67 127mm x 146mm x 37mm 0,7kg Panel / RAM 3,2” QVGA color TFT 320 x 240 38 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898 1 x RS232 Real Time Clock RF interface


Compact Controller Module CCM1100S

CCM1100S is compact and versatile I/O controller with 38 configurable I/O lines. The built-in Real Time Clock can be used for instance for logging events with time stamp. In addition to flash there is also battery backed memory for storing fast changing information. Optionally it can be equipped with RF interface.

CCM1100S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces: Other: Optional:

9—32VDC -40°C …. +85°C Aluminium, IP67 109mm x 140mm x 35mm 0,7kg 38 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898 1 x RS232 Real Time Clock RF interface

9


Compact Controller Module HCM3210S

The HCM3210S Hybrid Controller Module features 20 configurable I/O lines in small cost efficient package. It contains all the features available also in our bigger HCM products. It is targetted for tough environmental conditions where smaller number of I/O lines is sufficient. The main use of HCM3210S is to be a part of CAN based control system or as standalone solution for simple control system.

SO

ON

AV AIL AB L

E!

HCM3210S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces:

10

www.exertus.fi

9—32VDC -20°C …. +85°C Aluminium, IP67 112mm x 102mm x 34mm 0,35kg (to be checked later) 20 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898


Hybrid Sensor with Gyro HCM4100S-G

HCM4100S-G Hybrid Sensor features combined high performance angular rate sensor, dual accelerometer and programmable controller with 20 configurable I/O lines. The sensor is targeted for tough environmental conditions for applications where high stability is needed.

Z

The advanced sensor design minimises disturbances from mechanical shocks and vibration. The main use of HCM4100S-G is to be a part of CAN based control system or as standalone solution for simple control system. Y X

SO

ON

AV AIL AB L

E!

HCM4100S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Measurement accuracy (X & Y): Angular rate sensing (Z): I/O lines: Interfaces:

9—32VDC -20°C …. +85°C Aluminium, IP67 112mm x 102mm x 34mm 0,35kg (to be checked later) 0.1° (±45°) ±300°/sec 20 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898

11


Hybrid Controller Module HCM2000S

The HCM2000S Hybrid controller is a smart I/O module with wide range of features. It has 48 configurable I/O lines. The firmware includes ready-made functions that can be configured through CAN bus. For instance J1939, joystick control, output ramps, end cushioning and hydrostatic drive control functions are built into the firmware. Optionally it can also be equipped with inclinometer.

HCM2000S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces: Optional:

12

www.exertus.fi

9—36VDC -40°C …. +85°C Aluminium, IP67 109mm x 169mm x 47mm 0,6kg 48 (DI, PI, AI, DO, PWM) 2 x CAN 2.0B, ISO 11898 Inclinometer


Hybrid Controller Module HCM3100S

HCM3100S Hybrid I/O module is a smart controller with a wide range of configurable inputs and outputs. The module consists of built-in controls and functions that may be activated and configured through CAN bus. For instance joystick, output ramps, end cushioning and hydrostatic drive control functions are built into the firmware, It is especially well suited to be as measuring and user interface module with its large number of inputs. Optionally it can be equipped with inclinometer.

HCM3100S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces: Optional:

9—36VDC -40°C …. +85°C Aluminium, IP67 109mm x 169mm x47mm 0,6kg 52 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898 Inclinometer

13


Tiny Hybrid Controller Module HCM3200

The HCM3200S Tiny Hybrid Controller is a smart I/O module with 19 configurable I/O lines. It is mainly used as intelligent slave. It can also be used standalone when configured for that purpose over CANopen profile. The firmware includes ready-made functions that can be configured through CAN bus. For instance joystick control, output ramps and end cushioning functions are built into the firmware.

HCM3200S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces: Optional:

14

www.exertus.fi

9—36VDC -40°C …. +85°C Aluminium, IP67 85,4mm x 125mm x 46mm 0,2kg 19 (DI, PI, AI, DO, PWM) 1 x CAN 2.0B, ISO 11898 Inclinometer


Inclinometer HCM4000S1

HCM4000S is inclinometer with 4 outputs. The outputs can be configured between digital and PWM functionality. It can be used standalone via CANopen profile configuration for controlling outputs according to inclination or it can be used as part of a larger system. It is well suited for use in harsh environments.

HCM4000S1 Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Measurement accuracy: Weight: I/O lines: Interfaces:

9—36VDC -40°C …. +85°C Aluminium, IP67 85mm x 85mm x40mm 0.1° (±45°) 0,3kg 4 (DO, PWM) 1 x CAN 2.0B, ISO 11898

15


Machine Control Logic Module MCL5000

The MCL5000 Machine Control Logic Module is a smart I/O controller with built-in CAN hub. It is typically used as CANopen master. The built-in CAN hub allows creating star topology CAN bus. The CAN status LEDs makes it easy to pinpoint CAN related problems to one branch of the star.

MCL5000 Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces:

Optional:

16

www.exertus.fi

9—36VDC -40°C …. +85°C Aluminium, IP34 193mm x 105mm x 35mm 0,5kg 39 (DI, PI, AI, DO, PWM) 7 x CAN 2.0B, ISO 11898 1 x CAN 2.0B isolated, ISO 11898 3 x RS232 Inclinometer


Machine Control Logic Module MCL6000S

The MCL6000S Machine Control Logic Module is designed for demanding control systems. It contains large amount of inputs and outputs. It also has RS232, RS485 and USB port. As option the unit can be equipped with RF interface and with ModBus interface.

MCL6000S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: I/O lines: Interfaces: Other: Optional:

9—32VDC -40°C …. +85°C Aluminium, IP67 109mm x 214mm x47mm 0,7kg 56 (DI, PI, AI, DO, PWM) 2 x CAN 2.0B, ISO 11898 Real Time CLock ModBus RF Interface

C 17


CAN Hub Module CH8S

The CH8S CAN Hub Module that offers easy way to go for star topology CAN bus which makes it easy to pinpoint the source of CAN related problems to one branch of the star.

Status LEDs: L1 … L8 L9 L10 L12 CH8S Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Interfaces:

18

www.exertus.fi

9—36VDC -40°C …. +85°C Aluminium, IP67 160mm x 120mm x 37.6mm 0,65kg 8 x CAN 2.0B, ISO 11898

Power on CAN traffic Reverse CAN voltage CAN overvoltage


PWM to Voltage Converter PVC12

The PVC12 is 12 channel PWM to voltage converter. It is used to convert PWM signal from controller to analog signal with voltage range of 0-12V.

PVC12 Operating voltage range: Operating temperature range: Housing: Main dimensions (w x l x h): Weight: Conversion channels: Input PWM frequency: Input PWM amplitude: Output voltage: Output amplitude:

12—30VDC -40°C …. +85°C Aluminium, IP67 85.4mm x 125mm x46mm 0,2kg 12 250Hz - 12kHz 1 - 12V 0 - 12V 1 - 12V

19


Exertus Oy Kampusranta 9 FIN-60320 Sein채joki Finland Tel. +358 10 4205 347

11. Mar 2014

20

www.exertus.fi

www.exertus.fi

Exertus Product Catalog  

Control Products for hard environments. March 2014

Advertisement