Page 1

HomeWorks®

WIRED LOCAL DIMMERS

Designer-style: Maestro® 048-012 1a 04.16.03

HomeWorks Wired Maestro Dimmers

DESCRIPTION

Indicator Lights (Dimmer Only) Dimming Rocker

HomeWorks Wired Maestro Dimmers, used in both localized and optimized lighting control designs, function much like standard dimmers, and have an integral microprocessor, allowing them to be incorporated into the whole-house lighting control system. Local dimmers are useful in locations where single circuits of lighting need to be dimmed and local control is desired. HomeWorks Maestro Dimmers incorporate advanced features such as fade on/fade off, long fade to off, and rapid full on. HomeWorks Maestro Dimmers include a Front Accessible Service Switch for safe lamp replacement. All HomeWorks Maestro Dimmers can be installed in either single pole or 3-way applications. HomeWorks Wired Maestro Dimmers may be used with HomeWorks Maestro Remote Dimmers to provide dimming control from up to 9 additional locations.

Tapswitch

FASSTM - Front Accessible Service Switch Dimmer

MODEL NUMBERS Dimmers HWD-6D-XX HWD-6ND-XX HWD-10D-XX HWD-10ND-XX

600 W Incandescent/MLV Dimmer 600 W Incandescent/MLV Neutral Wire Dimmer 1000 W Incandescent/MLV Dimmer 1000 W Incandescent/MLV Neutral Wire Dimmer

Remote Dimmers HD-RD-XX

Remote Dimmer

“XX” in the model number represents color/finish code.

Remote Dimmer

® JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

Page


HomeWorks®

WIRED LOCAL DIMMERS

Designer-style: Maestro® 048-012 2a 04.16.03

• When ON, press and hold to engage long fade to OFF.

S P E C I F I C AT I O N S Regulatory Approvals

• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.

• UL Listed. • CSA Certified.

• Use Lutron Designer (Claro® or Satin ColorsTM) wallplates or designer-style wallplates from other manufacturers (when using metal wallplates from other manufacturers, it is recommended that a Midnight (MN) dimmer be used). Wallplates are sold separately.

Power Operating voltage: 120/127VAC, 50/60Hz. Key Design Features • Green indicator lights. • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-4-2.

• Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. • Requires a 1-gang U.S. wallbox. 3-1/2 in. (89mm) deep recommended, 2-1/4 in. (57mm) deep minimum.

• Tested to withstand surge voltages without damage or loss of operation,in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.

System Communications and Capacity • Dimmers are wired to a HomeWorks Dimmer Hub (HWI-H48). One pair twisted shielded #22-18 AWG (0.5-1.0mm2) Class 2/PELV wiring.

• Dimmers operate locally and do not require system control. • Power failure memory: should power be interrupted, the lights will return to their previously set level prior to the interruption when power is restored.

• Each HomeWorks Dimmer Hub (HWI-H48) is capable of directly controlling up to 48 dimmers. Up to 8 dimmers may be wired to a single bus on the HWI-H48. Refer to Class 2/PELV Wiring.

• Multiple location dimming from Dimmer and up to 9 Remote Dimmer(s).

COLOR / FINISH CODES Dimmer Color

(code)

Designer Gloss Colors White (WH) Ivory (IV) Almond (AL) Light Almond (LA) Gray (GR) Brown (BR) Black (BL) Satin Colors Matte Hot Ochre Terracotta Desert Stone Stone Limestone Blue Mist Midnight Taupe Eggshell Biscuit Snow

Environment

• Uses conventional 3-way and 4-way wiring.

Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only.

• On a single-tap, lights fade ON or OFF. • On a double-tap, lights go to full ON.

Warranty • 8 Year Limited Warranty. MOUNTING Dimmer Mounting Screws

Adapter Mounting Screws

Wallbox Dimmer Wallplate/Adapter purchased separately.

® JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

Page

Finishes (HT) (OC) (TC) (DS) (ST) (LS) (BT) (MN) (TP) (ES) (BI) (SW)


HomeWorks速

WIRED LOCAL DIMMERS

Designer-style: Maestro速 048-012 3a 04.16.03

DIMENSIONS Side View

Front View Dimmer

4-11/16 in. (119mm)

Remote Dimmer

4-11/16 in. (119mm)

2-15/16 in. (75mm)

2-15/16 in. (75mm)

5/16 in. (7.6mm)

1-3/8 in. (34.8mm)

D I M M E R O P E R AT I O N

Indicator Lights (Dimmer only) Indicate light level; glow softly as night light when light is off Tapswitch Tap on/off Dimming Rocker Brighten Dim

OFF

ON

FASSTM Front Accessible Service Switch

IMPORTANT NOTICE: FASS - Front Acessible Service Switch - to replace bulb, remove power by sliding FASS switch to the left on either the Dimmer or Remote Dimmer. After replacing bulb, slide the FASS switch to the right to operate the dimmer.

速 JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

Page


HomeWorks速

WIRED LOCAL DIMMERS

Designer-style: Maestro速 048-012 4a 04.16.03

D I M M E R L OA D T Y P E / C A PAC I T Y HWD-6D

HWD-6ND

HWD-10D

HWD-10ND

Incandescent, Magnetic LowVoltage

Incandescent, Magnetic LowVoltage

Incandescent, Magnetic LowVoltage

Incandescent, Magnetic LowVoltage

50W/VA

10W/VA

50W/VA

10W/VA

INC

600W

600W

1000W

1000W

MLV

600VA (450W)

600VA (450W)

1000VA (800W)

1000VA (800W)

ELV

N/A

N/A

N/A

N/A

NO

YES

NO

YES

L OA D T Y P E

M I N I M U M L OA D

MAXIMUM C A PAC I T Y

NEUTRAL WIRE

GA N G I N G A N D D E R AT I N G When ganging dimmers with other dimmers or controls in the same wallbox, derating is required.

END of Gang

MIDDLE of Gang

For multi-gang installations, derate load capacities as follows: E n d of G a n g Incandescent

Model No.

500W 500W 800W 800W

HWD-6D HWD-6ND HWD-10D HWD-10ND

速 JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

M LV 500VA (375W) 500VA (375W) 800VA (650W) 800VA (650W)

M i d d l e of G a n g Incandescent 400W 400W 650W 650W

M LV 400VA 400VA 650VA 650VA

(300W) (300W) (500W) (500W)

Page


HomeWorks®

WIRED LOCAL DIMMERS

Designer-style: Maestro® 048-012 5a 04.16.03

WIRING DIAGRAMS Single Location Installation -6D, -10D

To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch

Single Location Installation with Neutral -6ND, -10ND, -8ANS Dimmer/S witch

Dimmer Hot/Live

Black

Red

Hot/Live

Black

Blue

Red Blue

Lighting Load

Cap Off*

120/127VAC 50/60Hz

To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch

Green

Lighting Load

Cap Off*

120/127VAC 50/60Hz Green

White Neutral

Neutral

*When using controls in single location installations, cut off the uninsulated portion of the control’s multi-location wire (blue wire) and cap off using one of the provided wire connectors. DO NOT connect the blue wire to any other wiring or to ground.

Multi-Location Installation1 -6D, -10D with HD-RD

To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch

Hot

Black

Red

Remote Dimmer

Dimmer

Remote Dimmer Black

Red

Black

Red

Lighting Load 120/127VAC 50/60Hz

Green

Blue

Green

Blue

Green

Blue

Neutral

Multi-Location Installation with Neutral1, 2 -6ND, -10ND, with HD-RD, -8ANS with HD-RS Remote Dimmer/Switch Hot

Black

Red

Black

Red

To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch

Dimmer/ Switch

Remote Dimmer/Switch

Black

Red

Lighting Load 120/127VAC 50/60Hz

Green

Blue

Green

Blue

Green

Blue

White Neutral

1 Up to 9 HomeWorks Maestro Remote Dimmers/Switches may be connected to the HomeWorks Wired Maestro Dimmer/Switch. Total blue wire length may be up to 250 ft. (76m).

2 Neutral wire Dimmers/Switches must be connected on the Lighting Load side of a multi-location installation.

® JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

Page


HomeWorks速

WIRED LOCAL DIMMERS

Designer-style: Maestro速 048-012 6a 04.16.03

C L A S S 2 / P E LV W I R I N G Dimmer Side View

Dimmer communications wiring may be in a daisy-chain, star, or t-tap configuration. Each home run on a bus may be up to 500 ft. (152m) and may contain up to 8 devices. The total length of wire on each bus (all home runs) may be up to 1000 ft. (305m). Up to 48 HomeWorks Wired Maestro Dimmers or Switches may be wired to the HomeWorks Dimmer Hub (HWI-H48). Up to four HWI-H48s may be placed on each processor link configured as an H48 link in the HomeWorks Utility.

Class 2/PELV wiring to HomeWorks Dimmer Hub or other HomeWorks Wired Maestro devices. Butt Splices Drywall Wallbox

Dimmer Backcover C L A S S 2 / P E LV W I R E T Y P E One pair #22-18 AWG (0.5 - 1.0mm2) twisted, shielded Class 2/PELV. HWI-H48 Dimmer Hub

Gray

Violet

Gray

Violet

Gray

Violet

Up to 8 dimmer or switch devices may be wired to each bus on the H48.

1 pair #22-18 AWG (0.5mm-1.0mm2) twisted, shielded Class 2/PELV Maximum 500 ft. (152m) per home run, maximum 1000 ft. (305m) total per bus (Non-polarized)

Violet Gray

速 JOB NAME:

JOB NUMBER:

SPECIFICATION SUBMITTAL MODEL NUMBERS:

Page

048-012a  

HomeWorks Wired Maestro Dimmers may be used with HomeWorks Maestro Remote Dimmers to provide dimming control from up to 9 additional locatio...

Advertisement