Issuu on Google+

Brocade

•150-710

Brocade Certified Service Provider Network Engineer Exam

Click the link below to buy full version as Low as $39

http://www.examcertify.com/150-710.html

Questions & Answers: 08


Question: 1 What are two purposes of a high-speed Switch Fabric Module (hSFM)? (Choose two.) A. It switches packets at line rate from one router to another router in a chassis-based system. B. It switches packets at line rate from the management module to the standby management module in a chassis-based system. C. It switches packets at line rate from the management module to an interface module in a chassisbased system. D. It switches packets at line rate from one interface module to another interface module in a chassis-based system.

Answer: C, D Question: 2 What are two functions of the Traffic Manager in a Brocade MLXe line card? (Choose two.) A. It allows prioritization and scheduling of packets destined to the fabric element. B. It ensures that the CPU-bound data and control packets do not get separated. C. It allows prioritization and scheduling of packets destined for the CPU. D. It achieves physical separation of CPU-bound data and control packets.

Answer: C, D Question: 3 You notice that an SFP+ optic is transitioning states between normal light levels and no light levels in a Brocade MLXe. Which Brocade feature would you implement to automatically remove the port from service for a specified amount of time? A. link fault signaling B. link delay event C. port flap dampening

Answer: C http://www.examcertify.com/150-710.html

Page 2


Question: 4 Your customer has a residential Fiber-To-The-Home (FTTH) data closet that is not climate controlled. Which Brocade product would you use? A. Brocade MLXe B. Brocade 6910 C. Brocade CER D. Brocade VDX 6720

Answer: B Question: 5 You have enabled sFlow on a single port on a Brocade MLXe device. You notice that the line processor (LP) CPU utilization for that port has now increased dramatically.What you would do to lower the LP CPU utilization? A. Increase the sFlow sampling rate value. B. Decrease the sFlow sampling rate value. C. Increase the sFlow polling interval. D. Decrease the sFlow polling interval.

Answer: A Question: 6 What is sFlow used for on a Brocade MLXe? A. sFlow is used to observe traffic flow patterns and quantities in real time. B. sFlow is used to observe the committed information rate in real time. C. Flow is used to observe RMON data at a sampled rate. D. sFlow is used to observe traffic flow patterns and quantities at a sampled rate.

Answer: D

http://www.examcertify.com/150-710.html

Page 3


Question: 7 Your Brocade MLXe Management Module's CPU is overloading due to large amounts of control traffic sent to one of the IP interfaces.Which feature would you implement to protect the CPU? A.IP ACL B.IP interface ACL C. management ACL D.IP receive ACL

Answer: D Question: 8 172.16.50.0/24 subnet and the server IP address is 172.16.100.5. Which syntax will accomplish this task? A. access-list 101 permit tcp 172.16.50.0 0.0.0.255 host 172.16.100.5 eq 25 B. access-list 101 permit tcp 172.16.50.0 255.255.255.0 host 172.16.100.5 eq 25 C. access-list 101 permit tcp 172.16.50.0 0.0.0.255 host 172.16.100.5 eq 22 D. access-list 101 permit tcp 172.16.50.0 0.0.0.255 172.16.100.5 eq 25

Answer: A

http://www.examcertify.com/150-710.html

Page 4


•150-710

Brocade

Brocade Certified Service Provider Network Engineer Exam

Click the link below to buy full version as Low as $39

http://www.examcertify.com/150-710.html

Latest tests

70-331

70-332

LOT-951

70-321

HP2-T25

HP2-T26

70-341

70-342

70-411

70-410

70-336

PEGACLSA_62V2

70-337

C_TADM51702

HP0-J54

00M-662

70-689

000-N37

70-480

HP0-J59

http://www.examcertify.com/150-710.html

Page 5


150 710 exam pdf