Our goal, your welfare
General catalogue PIG EQUIPMENT
Our goal is to achieve your animal welfare as well as your investments profitability. It hasnÂ´t been easy to reach such a level where our range of products respond to the highest quality and performance standards. ThatÂ´s why being proud of our customers service spirit and bearing in mind their suggestions, we have provided our products with all the required features. As a result of a good job, we can guarantee that EXAPIG has become the most reliable option for your projects. Therefore, we are absolutely sure that no matter how much you think about it, it works.
04 Piglet feed pans
15 Chain feed conveyor
26 Heating pads
05 Junior pan
27 Crate and box Dividers
06 Junior hopper
17 Detachable dispenser
28/29 Pen dividers
07 Stainless steel hopper
18. 6 liter feed dispenser
30 Standard configuration for farrowing rooms
19. 10 liter feed dispenser
31 Standard configuration for weaning rooms
09 Infrared brooders
32/33/34 Feed and control systems for free animals
10 Liquid feeding for piglets
21 Beam support
11 Liquid feeding for fatteners
22 Slat for piglets
36 Standard configurations
12 Hopper for sows
23 Slat for piglets
37 Standard configurations
13 Hopper for finishing pigs
24 Slat for sows
38/39 Comparison between Exapig and other slats
14 Spiral feed conveyor
25 Cast iron slats
STAINLESS STEEL HOPPER Hoppers are produced from stainless steel, which ensures a stable and long lasting product without any major maintenance, or need for repair. Stainless steel is easy to clean and offers high hygienic level for your animals.
Ref.: 52031 Five space simple pigglet hopper stainless stail, detachable Ref.: 52032 Five space double pigglet hopper stainless stail, detachable Ref.: 52033 Six space simple pigglet hopper stainless stail, detachable Ref.: 52034 Six space double pigglet hopper stainless stail, detachable
EASY OPERATION Hoppers are equipped with Select-A-Flow adjustment, which allows you to make easy adjustment of the feed flow, even with a full feeder. Select Â– A Â– Flow adjustment
The feeder is easy to clean and the design of front edge offers a high feed efficiency with less waste of feed. All exposed ends of stainless steel are hemmed for safety of your animals.
Technical data Nursey feeder < 25 kg
5 holes,double sided 6 holes,double sided 5 holes,single sided 6 holes,single sided
76x79 91x79 76x79 91x79
Volume kg 95 114 48 58
No.Pigs 60-80 80-100 30-40 40-50
DRINKERS Drinkers are equipped with a volume regulating system, position is indicated with a regulating screw. Animal access zone valve made of stainless steel. The special cup design allows the valve dismantling for its cleaning. There is no need to dismantle the cup.
PVC drinker for 20 kg. piglets Ref.: 53020
PVC drinker for 6 kg. piglets Ref.: 53010
Easy adjustment of the water volume when dismantling the drinker.
32 pallets per pallet
50 Units per pallet
Easy valve dismantling for cleaning.
* Pallet: 1m x 1,20m.
Stainless steel drinker for piglets with nipple Ref.: 53035
Stainless steel drinker for fattening pigs with nipple Ref.: 53045
Stainless steel drinker for sows with nipple Ref.: 53065
Ref.: 81050 Transparent reflector made of plastic Ref.: 81055 Reflector made of aluminium
Reflectors made of transparent polycarbonate or aluminium with an activation switch, and infrared brooders of up to 250 watts. It includes an ideal radiation distribution, without any obstacle.
HOPPER FOR LIQUID FEEDING The liquid feeding system has gained a deserved reputation on the market for piglets between 7 and 100 Kg. Even the weaning piglets can perfectly adapt to this model of hopper.
Ref.: 52045 Simple humid hopper 90L. for weaning pigs
The feeder lid guarantees the feeder to remain clean and fresh. There is also a bigger lid for the manual feeder supply . On the upper part of the lid, there is a universal inlet for the automatic feeding. We can insert two tubes.
Ref.: 52051 Double humid hopper 90L. for weaning pigs The fact of being the feeder made of plastic and stainless steel components favors its cleaning. All these parts can undergo the farm cleaning whenever it s done by means of a pressurized water device. You must not use aggressive chemical agents. The feeder has an integrated water system of 8 mm with only one accessory.
MIXI FRATS Feed volume Capacity Interval Measures (a*b*d*)
Feed volume Capacity Interval Measures (a*b*d*)
90L 30-40 maximum pig 6-120 Kg
90L 30-40 maximum pig 6-50 Kg
90L 30-40 maximum pig 6-50 Kg
130cm * 46cm * 57 cm
117cm * 46cm * 57 cm
119cm * 46cm * 57 cm
90L 30-40 maximum pig 20-120 Kg
180L 50-60 maximum pig 6-120 Kg
120cm * 56cm * 57 cm
117cm * 105cm * 57 cm
Feeder Maxi for Maxi
LIQUID FEEDING FOR FATTENERS Advantages of the liquid feeding hopper: Feed is not wasted. Easy learning. Easy handling. Easy access to the feed. No waste remains (flat surface). Easy to clean. Accurate adjustment of the measured feed.
Humid feeding hopper for fattening pigs 70L
Dosage and water The adjustment has improved by allowing a precise adjustment of the feeding dose Equipped with a stainless steel water tube as well as nipples.
The feeder was made of stainless steel through a shaping process, that´s why the round corners were achieved in order to avoid the sharp edges suspicious to harm the animal. Height over the floor: 160 mm.
Feed volume Capacity Interval
*Option to supply several anchoring to the floor.
70L 20 piglets for each side of the feeder 18-120 Kg
The feeder lid ensures the feed to remain fresh and clean. Large capacity: 70 l
HOPPER It´s the only hopper on the market with a feed dispenser design which favours a uniform growth of the animals during the first weeks, and therefore achieving homogenous pens and a high level of transformation. Decrease of the animal stress since it eats ad libitum and measures out the feed ingestion according to its own will
Ref.:52080 Ref.:52090 Ref.:52100 Ref.:52110 Ref.:52120 Ref.:52130
Pellet hopper with water supply on the left side Pellet hopper with water supply on the right side Flour hopper with water supply on the left side Flour hopper with water supply on the right side Pellet hopper without water Flour hopper without water STAINLESS STEEL NIPPLE TUBE WITH DIRECT LINK
Totally radiated pan design which avoids the corners and therefore the accumulation of food waste.
Easy cleaning and disinfection due to the detachable feed measuring mechanism.
GREAT CAPACITY: UP TO 60 KG WITHOUT INCREASING THE HEIGHT.
CHAIN FEED CONVEYOR Ø
Safety stop in case the chain gets stuck or untensioned.
We use the strongest chain in the market, this ensures its liability and maximum endurance. Driving system: 50 and 60
Easy control of the circuit tension.
Driving wheel made of cast iron.
Safety end chain in order to avoid the machine handling when being used.
Special polished chain. Ø6.2 mm.
Driving system hooks to the link chain and not to the plastic chain. It avoids its wearing and breaking. Equipment and accessories totally made of stainless steel
90º corner made of stainless steel Inside cast iron wheel equipped with a double inside bearing.
DETACHABLE DISPENSER Ref.:75100 Volumetric dispenser 6-7 litres detachable 50-60 mm. Ref.:75110 Volumetric dispenser 6-7 litros detachable 50-60 mm. End of line Ref.:75120 Volumetric dispenser 6-7 litres detachable 75-90 mm. Ref.:75130 Volumetric dispenser 6-7 litres detachable 75-90 mm. End of line
Anti-closure rasera fall
Cleaning cap, big size
Regulation actuated with only one hand
Dispenser assembling with clicks
BEAMS Ref.:77033 Ref.:77031 Ref.:77032 Ref.:77030
Polyester support beam 60 mm x 5,5 mm Polyester support beam 80 mm x 5,5 mm Polyester support beam 100 mm x 5,5 mm Polyester support beam 120 mm x 5,5 mm
Advantages of the polyester support beam: rustfree, resistant to cleaning products, smooth surface, high stability against side movements thanks to its base design. Easy to clean, highly resistant, in comparison with other profiles, there are no holes where waste can gather, therefore eliminating the chance of bacteria growth.
Ref.:77010 Support beam 100 mm x 5,5 mm galvanized Ref.:77020 Support beam 80 mm x 5,5 mm galvanized
Rubber protection for the beam
Galvanized support beam
CRATE AND BOXES Farrowing crate
*Any kind of model, measure and division for pigs is available.
GENERAL FEATURES: Available material: Hot galvanized tube Black solid tube Solid hot galvanized tube Cut and bending without edges Adaptable measures to allow different lengths Different door models are available Great strength.
60,00 FRONT VIEW
201,50 215,00 hopper 217,00 stainless steel feeder
STANDARD CONFIGURATION Example of a ventilated module with 16 weaning pens, 8 double hoppers and 70 cm high fences. Stainless steel fittings and screws delivered. The wide variety of bracing systems available allows any kind of configuration. Request for special fence heights.
70 cm. stainless steel fitting with front wall support Ref.: 83060 70 cm. stainless steel fitting with side wall support and safety device Ref.: 83070 Set of two 70 cm. fittings with a double hopper support Ref.: 83080
70 cm. side weaning divider between the hopper and the wall Ref.: 83030 Ref.: 83090 70 cm ventilated side weaning divider between the hopper and the wall. Ref.: 83030 Ref.: 83100 70 cm. side weaning divider Ref.: 83010 Ref.: 83090 70 cm. ventilated front weaning divider with handle Ref.: 83040 Ref.: 83100 70 cm front weaning divider 70 cm. with handle Ref.: 83020 Ref.: 83090 70 cm. ventilated front weaning divider with throttle Ref.: 83050 Ref.: 83100
83020 70 cm. stainless steel fitting for front weaning divider with handle.
83090 70 cm. weaning linear meter panel. 83010 70 cm. stainless fitting for side weaning divider.
83090 70 cm. weaning linear meter panel. 83030 70 cm. stainless steel side fitting for weaning hopper.
83090 70 cm. weaning linear meter panel 83080 70 cm. stainless steel fitting to double hopper.
6 6 8 8 8 4
83060 70 cm. stainless steel fitting to front wall support.
83070 70 cm. stainless steel fitting to side wall support with safety device.