Page 1

Agricultural and Materials Handling Catalogue 2013


About Us Evans & Reid design and manufacture a full range of buckets, and other bespoke attachments for all excavators, tele-handlers, skidsteer loaders, and tractor loaders. We design and produce quality material handling implements for use with all leading manufacturers of telescopic handlers including: Caterpillar, JCB Loadall, John Deere, Manitou, Massey Ferguson, Matbro, Merlo, New Holland and Sanderson. The combination of many different machines together with various mounting arrangements mean that finding equipment to meet specific needs can be difficult. Our products are individually designed using computers and the custom built nature of Evans & Reid products ensures that each implement adapts to suit any requirement to the highest standard.


Contents Buckets Grain Buckets Heavy Duty Re-Handling Buckets General Purpose Handling Buckets Construction Re-Handling Buckets Extra Heavy Duty Digging Buckets Sugar Beet Baskets Bucket Sweepers Re-Handling Bucket with Curved Grapple Heavy Duty Paper Waste Re-Handling Buckets with Claw Toe Tip Buckets Replacement Cutting Edges 4 in 1 Buckets

2 2 3 3 3 4 4 5 5 6 6 7

Buckets for Tractor Front-End Loaders For David Brown L.Q.9 / G.D.90 For Quickie/ Trima/ Tranco/ Grays/ Bomford/ Farmhand/ Chillton/ John Deere For Massey Ferguson Sugar Beet Baskets Replacement Cutting Edges for Buckets

8 9 10 10 10

Forks Manure Forks Powered Manure Forks Heavy Duty Manue Forks Short Tine Manure Forks High Capacity Grass Forks Stockmans Grab Heavy Duty Grass Forks Bucket Grab with Hardox Grab Tines

11 12 13 14 15 16 16 17

Forks for Tractor Front-End Loaders Forks for Quicke/ Trima/ Tanco/ Grays/ Bomford/ Zetor/ Chilton Loaders/ david Brown L.Q.9 / G.D.90/ Farmhsnd Forks for John Deere/ Forks for Horndraulic/ International 241 Fork/ Mil Forks/ Massey Ferguson Forks Parimter Rear Loader Forks/ Quickie 2000 / Quickie Multi H-Forks Manure Forks Stockmans Grab

18 19 20 21 22


Bale Handlers Heavy Duty Bale Spikes Rear Mounted Bale Spikes Bale Spikes for Tractor Fore End Loaders Round Bale Handlers Round Big Bale Unwinder

24 25 26 27 27

Special Attachments Tipping Skips Fly Jibs Man Platforms

28 28 29

Pallet Forks Pallet fork carriage with forks Pallet fork carriage without forks Heavy Duty drive in fork extensions Pallet fork for tractor loaders Replacement tine rails Shear grab replacement tine rails

30 30 31 31 32 32

Quick Hitch Frames for tractor loaders, diggers and material handlers Weight Box Assembly Quickie E Tractor Loader Mounting Brackets

33 33 34

Skid Steer Attachment Industrial pallet fork carriages Much Forks Strong shirt tine silage/manure forks Loader Forks Dirt Buckets Utility Buckets Industrial Grapples Bale Spikes

35 35 36 36 37 38 38 38


BUCKETS 1. Formed box section across top of bucket, providing additional strength. 2. Heat treated Boron steel cutting edge 3. Bracket straps all the way around the bucket 4. Continuously welded digging strap for extra strength 5. Insert across bucket, providing extra hardiness 6. Added corner gussets for durability 7. Level top section

1


BUCKETS Grain Buckets Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.19 m (47")

0.84 m (33")

1.16 m3 (41 CU/ft)

1.42 m3 (50 CU/ft)

G 01

2.13 m (7'0")

1.19 m (47")

0.84 m (33")

1.25 m3 (44 CU/ft)

1.53 m3 (54 CU/ft)

G 02

2.29 m (7'6")

1.19 m (47")

0.84 m (33")

1.33 m3 (47 CU/ft)

1.64 m3 (58 CU/ft)

G 03

0.91 m (36")

1.59 m3

(56 CU/ft)

1.67 m3

(69 CU/ft)

G 04

1.98 m3

(70 CU/ft)

2.38 m3

2.29 m (7'6")

1.31 m (51.5")

2.29 m (7'6")

1.46 m (57.5")

1.03 m (40.5")

(84 CU/ft)

G 05

2.44 m (8'0")

1.31 m (51.5")

0.91 m (36")

1.70 m3 (60 CU/ft)

2.10 m3 (71 CU/ft)

G 06

2.44 m (8'0")

1.46 m (57.5")

1.03 m (40.5")

2.12 m3 (75 CU/ft)

2.58 m3 (91 CU/ft)

G 07

1.05 m (41.5")

2.27 m3

(80 CU/ft)

2.72 m3

(96 CU/ft)

G 08

2.55 m3

(90 CU/ft)

3.06 m3

(108 CU/ft)

G 09

3.43 m3 (121 CU/ft)

G 10

2.44 m (8'0")

1.51 m (59.5")

2.44 m (8'0")

1.6 m (63")

1.12 m (44")

2.44 m (8'0")

1.69 m (66.5")

1.18 m (46.5")

2.83 m3 (100 CU/ft)

* Round bars for potatoes can be fitted P.O.A

Heavy Duty Re Handling Buckets Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.09 m (43")

0.75 m (29.5")

0.93 m3 (33 CU/ft)

1.16 m3 (41 CU/ft)

GP 01

1.42 m3

1.98 m (6'6")

1.19 m (47")

0.84 m (33")

1.16 m3

(50 CU/ft)

GP 02

1.98 m (6'6")

1.31 m (51.5")

0.91 m (36")

1.39 m3 (49 CU/ft)

1.70 m3 (60 CU/ft)

GP 03

2.13 m (7'0")

1.09 m (43")

0.75 m (29.5")

0.99 m3 (35 CU/ft)

1.25 m3 (44 CU/ft)

GP 04

0.84 m (33")

1.25 m3

(44 CU/ft)

1.53 m3

(54 CU/ft)

GP 05

m3

(53 CU/ft)

1.84 m3

2.13 m (7'0") 2.13 m (7'0")

1.31 m (51.5")

0.91 m (36")

(65 CU/ft)

GP 06

2.29 m (7'6")

1.09 m (43")

0.75 m (29.5")

1.08 m3 (38 CU/ft)

1.36 m3 (48 CU/ft)

GP 07

2.29 m (7'6")

1.19 m (47")

0.84 m (33")

1.33 m3 (47 CU/ft)

1.64 m3 (58 CU/ft)

GP 08

0.91 m (36")

1.59 m3

(56 CU/ft)

1.67 m3

(69 CU/ft)

GP 09

1.13 m3

(40 CU/ft)

1.42 m3

2.29 m (7'6")

2

1.19 m (47")

1.31 m (51.5")

1.5

(41 CU/ft)

2.44 m (8'0")

1.09 m (43")

0.75 m (29.5")

(50 CU/ft)

GP 10

2.44 m (8'0")

1.19 m (47")

0.91 m (36")

1.70 m3 (60 CU/ft)

2.10 m3 (71 CU/ft)

GP 11

2.29 m (7'6")

1.31 m (51.5")

1.03 m (40.5")

1.98 m3 (70 CU/ft)

2.38 m3 (84 CU/ft)

GP 12A


Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.09 m (43")

0.75 m (29.5")

0.93 m3 (33 CU/ft)

1.16 m3 (41 CU/ft)

GP 12

2.13 m (7'0")

1.19 m (47")

0.84 m (33")

1.25 m3 (44 CU/ft)

1.53 m3 (54 CU/ft)

GP 13

2.29 m (7'6")

1.09 m (43")

0.75 m (29.5")

1.08 m3 (38 CU/ft)

1.36 m3 (48 CU/ft)

GP 14

(47 CU/ft)

1.64 m3

(58 CU/ft)

GP 15

(56 CU/ft)

1.67 m3

2.29 m (7'6")

1.19 m (47")

0.84 m (33")

1.33

m3

1.59

m3

2.29 m (7'6")

1.31 m (51.5")

0.91 m (36")

(69 CU/ft)

GP 16

2.44 m (8'0")

1.09 m (43")

0.75 m (29.5")

1.13 m3 (40 CU/ft)

1.42 m3 (50 CU/ft)

GP 17

2.44 m (8'0")

1.19 m (47")

0.84 m (33")

1.42 m3 (50 CU/ft)

1.70 m3 (60 CU/ft)

GP 18

2.10 m3

GP 19

2.44 m (8'0")

1.31 m (51.5")

0.91 m (36")

1.70

m3

(60 CU/ft)

(71 CU/ft)

BUCKETS

General Purpose Handling Buckets

Construction Re Handling Buckets Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.00 m (39.5")

0.67 m (26.5")

0.71 m3 (25 CU/ft)

0.91 m3 (32 CU/ft)

C 01

2.13 m (7'0")

1.00 m (39.5")

0.67 m (26.5")

0.76 m3 ( 27 CU/ft)

0.99 m3 (35 CU/ft)

C 02

2.29 m (7'6")

1.00 m (39.5")

0.67 m (26.5")

0.82 m3 ( 29 CU/ft)

1.05 m3 (37 CU/ft)

C 03

0.67 m (26.5")

0.88 m3

1.25 m3

C 04

2.44 m (8'0")

1.00 m (39.5")

( 31 CU/ft)

(40 CU/ft)

Extra Heavy Duty Digging Buckets Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.00 m (39.5")

0.67 m (26.5")

0.71 m3 (25 CU/ft)

0.91 m3 (32 CU/ft)

HD 01

0.75 m (29.5")

0.93 m3

1.98 m (6'6")

1.09 m (43")

(33 CU/ft)

1.13

m3

(40 CU/ft)

HD 02

( 27 CU/ft)

0.99 m3

2.13 m (7'0")

1.00 m (39.5")

0.67 m (26.5")

0.76 m3

(35 CU/ft)

HD 03

2.13 m (7'0")

1.09 m (43")

0.75 m (29.5")

0.99 m3 (35 CU/ft)

1.25 m3 (44 CU/ft)

HD 04

2.13 m (7'0")

1.19 m (47")

0.84 m (33")

1.25 m3 (44 CU/ft)

1.53 m3 (54 CU/ft)

HD 05

0.67 m (26.5")

0.82 m3

( 29 CU/ft)

1.05 m3

(37 CU/ft)

HD 06

m3

(38 CU/ft)

1.36 m3

2.29 m (7'6")

1.00 m (39.5")

2.29 m (7'6")

1.09 m (43")

0.75 m (29.5")

(48 CU/ft)

HD 07

2.29 m (7'6")

1.19 m (47")

0.84 m (33")

1.33 m3 (47 CU/ft)

1.64 m3 (58 CU/ft)

HD 08

2.29 m (7'6")

1.31 m (51.5")

0.91 m (36")

1.59 m3 (56 CU/ft)

1.67 m3 (69 CU/ft)

HD 09

2.38 m3

HD 10

2.29 m (7'6")

1.31 m (51.5")

1.03 m (40.5")

Bolt on reversible heat treated blade Bolt on digging teeth * Each Fitted

1.08

1.98

m3

(70 CU/ft)

(84 CU/ft)

Part No. – A 0001 Part No. – A 0002

3


BUCKETS

Sugar Beet Baskets Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

2.29 m (7'6")

1.31 m (51.5")

0.91 m (36")

1.59 m3 (56 CU/ft)

1.67 m3 (69 CU/ft)

SB 01

2.44 m (8'0")

1.46 m (57.5")

1.03 m (40.5")

2.12 m3 (75 CU/ft)

2.58 m3 (91 CU/ft)

SB 02

2.44 m (8'0")

1.6 m (63")

1.12 m (44")

2.55 m3 (90 CU/ft)

3.06 m3 (108 CU/ft)

SB 03

Bucket Sweepers Fully galvanised, easy to hitch and stands free when not in use.

These sweepers can be added to buckets manufactured Evans & Reid Ltd. and are suited to buckets from 1.83 m (6'6") to 2.45 m (8'0"). Sweeper bristles are made from Polypropylene.

Bucket Sweeper Unit

4

Part No. – A 0003


with Curved Grapple

Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

1.98 m (6'6")

1.00 m (39.5")

0.67 m (26.5")

0.71 m3 (25 CU/ft)

0.91 m3 (32 CU/ft)

C 01 BG

1.98 m (6'6")

1.09 m (43")

0.75 m (29.5")

0.93 m3 (33 CU/ft)

1.16 m3 (41 CU/ft)

GP 01 BG

0.67 m (26.5")

0.76 m3

( 27 CU/ft)

0.99 m3

(35 CU/ft)

0.99 m3

(35 CU/ft)

1.25 m3

2.13 m (7'0")

1.00 m (39.5")

C 02 BG

2.13 m (7'0")

1.09 m (43")

0.75 m (29.5")

(44 CU/ft)

GP 04 BG

2.13 m (7'0") H.D.

1.31 m (51.5")

0.91 m (36")

1.5 m3 (53 CU/ft)

1.84 m3 (65 CU/ft)

HD 11 BG

2.29 m (7'6")

1.00 m (39.5")

0.67 m (26.5")

0.82 m3 ( 29 CU/ft)

1.05 m3 (37 CU/ft)

C 03 BG

2.29 m (7'6") 2.29 m (7'6") H.D.

1.09 m (43") 1.31 m (51.5")

0.75 m (29.5") 0.91 m (36")

1.08

m3

1.59 m3

BUCKETS

Re-Handling Bucket

(38 CU/ft)

1.36 m3

(48 CU/ft)

GP 07 BG

(56 CU/ft)

1.67 m3

(69 CU/ft)

HD 09 BG

Heavy Duty Paper Waste Re-Handling Bucket with Claw Open grab measurement – 2311.1 mm Pictures below show a HD 10 WC.

Width

Depth

Height

Capacity Level Fill

Capacity Heaped

Part No.

2.29 m (7'6")

1.31 m (51.5")

0.91 m (36")

1.59 m3 (56 CU/ft)

1.67 m3 (69 CU/ft)

HD 09 WC

2.29 m (7'6")

1.46 m (57.5")

1.03 m (40.5")

1.98 m3 (70 CU/ft)

2.38 m3 (84 CU/ft)

HD 10 WC

Bolt on reversible heat treated blade

Part No. – A 0001

5


BUCKETS

Toe Tip Buckets

Width

Depth

Height

Capacity Level Fill

Part No.

1.83 m (6'0")

0.74 m (29")

0.79 m (31")

0.65 m3 (23 CU/ft)

TT 1

0.79 m (31")

0.71 m3

(25 CU/ft)

TT 2

1.98 m (6'6")

0.74 m (29")

2.13 m (7'0")

0.74 m (29")

0.79 m (31")

0.76 m3

( 27 CU/ft)

TT 3

2.29 m (7'6")

0.74 m (29")

0.79 m (31")

0.82 m3 ( 29 CU/ft)

TT 4

1.98 m (6'6")

0.94 m (37")

0.86 m (34")

0.99 m3 (35 CU/ft)

TT 5

2.13 m (7'0")

0.94 m (37")

2.29 m (7'6")

0.94 m (37")

0.86 m (34")

1.08

m3

(38 CU/ft)

TT 6

0.86 m (34")

1.13 m3

(40 CU/ft)

TT 7

Replacement Cutting Edges For telescopic handler buckets Part No. Size

6

Boron Steel

Heat Treated Boron Steel

2.44 m x 150 mm x 20 mm

A 0004

A 0005

2.44 m x 200 mm x 20 mm

A 0006

A 0007


With this product you can dig, back-blade, scrape up or clamp. We now manufacture a range of 2.4m (8ft) wide, 4 in 1 buckets as shown in the pictures attached for telescopic handlers. These have heavy duty double wire hydraulic hoses and a central or side mounted “T� piece for easy connection to your machine.

We can fit these with brackets to suit most telescopic handlers, and the appropriate hydraulic protection valves depending if the machine has open or closed centre hydraulics.

Item

BUCKETS

4 in 1 Buckets For Telehandlers and large tractors

Part No.

4 in 1 Bucket

7


BUCKETS FOR TRACTOR FORE-END LOADERS

Buckets for Tractor Fore-end Loaders General purpose buckets for grain and general farm duties made from 4 mm (0.16") plate. Heavy duty buckets for slurry and dirt made from 5 mm (0.2") plate. All fitted with digging straps. Digging buckets made from 6 mm (0.24") plate. Prices are inclusive of brackets.

For David Brown L.Q.9 / G.D.90 * For buckets for David Brown quick release loaders a surcharge is added. * For buckets for David Brown G.D.90 loaders a surcharge is added. Part No. Width

1.52 m (5‘)

1.83m (6‘)

2.13 m (7‘)

8

Volume

4 mm

5 mm

6 mm

Standard

0.42 m³ (15 CU/ft)

2043

2048

2054

Intermediate

0.65 m³ (23 CU/ft)

2044

2049

2055

Standard

0.51 m³ (18 CU/ft)

2045

2050

2056

Intermediate

0.79 m³ (28 CU/ft)

2046

2051

2057

Standard

0.59 m³ (21 CU/ft)

2047

2052

2058

0.92 m³ (32.5 CU/ft)

n/a

2053

2059

Intermediate


* For Chilton and Farmhand buckets a surcharge is added. * For Tanco pin loaders/quickie no.2 systems a surcharge is added. Part No. Width

1.22 m (4')

Standard Intermediate

1.52 m (5')

1.83 m (6')

1.98 m (6"6')

2.13 m (7')

4 mm

5 mm

6 mm

0.40 m³ (12 CU/ft)

2001

2011

2027

0.52 m³ (18.5 CU/ft)

2002

2012

2028

Standard

0.42 m³ (15 CU/ft)

2003

2013

2029

Intermediate

0.65 m³ (23 CU/ft)

2004

2014

2030

Standard

0.51 m³ (18 CU/ft)

2005

2015

2031

Intermediate

0.79 m³ (28 CU/ft)

2006

2016

2032

Large

1.08 m³ (38 CU/ft)

n/a

2017

2033

Standard

0.55 m³ (19.5 CU/ft)

2007

2018

2034

Intermediate

0.86 m³ (30.5 CU/ft)

2008

2019

2035

Large

1.16m³ (41 CU/ft)

n/a

2020

2036

Standard

0.59 m³ (21 CU/ft)

2009

2021

2037

0.92 m³ (32.5 CU/ft)

2010

2022

2038

1.25 m³ (44 CU/ft)

n/a

2023

2039

Intermediate Large 2.29 m (7"6')

Volume

Standard

0.64 m³ (22.5 CU/ft)

n/a

2024

2040

Intermediate

0.99 m³ (35 CU/ft)

n/a

2025

2041

Large

1.33 m³ (47 CU/ft)

n/a

2026

2042

For John Deere Loaders Width 1.52 m (5')

1.83 m (6')

2.13 m (7')

2.44 m (8')

Volume

Part No.

Standard

0.51 m³ (18 CU/ft)

2060

Large

0.88 m³ (31 CU/ft)

2061

Standard

0.59 m³ (21 CU/ft)

2062

Large

1.08 m³ (38 CU/ft)

2063

Standard

0.71 m³ (25 CU/ft)

2064

Large

1.25 m³ (44 CU/ft)

2065

Standard

0.82 m³ (29 CU/ft)

2066

Large

1.42 m³ (50 CU/ft)

2067

BUCKETS FOR TRACTOR FORE-END LOADERS

For Quicke/ Trima/ Tanco/ Grays/ Bomford/ Farmhand/ Chillton

9


BUCKETS FOR TRACTOR FORE-END LOADERS

For Massey Ferguson 80/ 875/ 880/ 885/ 815/ 820/ 825/ 905/ 910/ 915 Part No. Width

1.37 m (4"6')

1.98 m (6"6')

Volume

4 mm

5 mm

6 mm

Standard

0.54 m³ (19 CU/ft)

2068

2072

2076

Large

0.85 m³ (30 CU/ft)

2069

2073

2077

Standard (With 2 Runners)

0.79 m³ (28 CU/ft)

2070

n/a

n/a

Standard (With 5 Runners)

0.79 m³ (28 CU/ft)

2071

2074

2078

Large

1.25 m³ (44 CU/ft)

n/a

2075

2079

Sugar Beet Baskets For Tractor Loaders, Material Handler Type Buckets & Extra Heavy Duty Digging Buckets Available For Tractor Loaders Item Standard Trip Bucket for M/F 35-7/40/80

2080

Standard Mil Trip / Power Bucket

2081

1.52 m (5') Mil Trip / Power Bucket

2082

1.83 m (6') Mil Trip / Power Bucket

2083

Standard Horn Drolic Trip / Power Bucket

2084

Any other tractor loader buckets can be manufactured, including:

• Tanco 968 Pin Loader Buckets • Quickie 2000 Trip / Power Buckets • Parmiter Rear Loader Buckets • Skid Steer Loader Buckets

Replacement Cutting Edges for Buckets Cut to customer requirements and available at very competitive prices. Bolt on cutting edges are available. Samples include: Part No. Item

10

Part No.

Boron Steel

Heat Treated Boron Steel

2 m x 100 mm x 12 mm

A 0020

Call for details.

2 m x 150 mm x 15 mm

A 0021

Call for details.

2.44 m x 150 mm x 20 mm

A 0004

A 005

2.44 m x 200 mm x 20 mm

A 0006

A 007


C/W Kverneland Tines

Width

No. Tines

Part No.

1.98 m (6'6")

9

F 004

2.13 m (7'0")

9

F 003

2.29 m (7'6")

10

F 002

0.23 m (9" Side extensions for forks)

FORKS

Manure Forks

F 005

Manure Forks C/W Kverneland Tines and Bolt on Grapple Open grab measurement – 1850 mm

Width

No. Tines

Part No.

1.98 m (6'6")

9

F 009

2.13 m (7'0")

9

F 008

2.13 m (7'0")

10

F 007

2.29 m (7'6")

10

F 006

Bolt on Kverneland

Part No. – A 0008

11


FORKS

Power Manure Fork C/W Kverneland Base and Grab Tines Bolt on Kverneland side tines Part No. – A 0008 Open grab measurement – 1354 mm Also available with high tensile steel tines, bottom tines and/or curved

Width

No. Tines

Grab Tines

Part No.

1.98 m (6'6")

9

5

F 008 A

2.13 m (7'0")

10

5

F 006 A

2.29 m (7'6")

10

5

F 005 A

Power Silage / Manure Fork C/W Kverneland Base and Grab Tines Bolt on Kverneland side tines Part No. – A 0008 Open grab measurement – 1200 mm Also available with high tensile steel tines, bottom tines and/or curved

12

Width

No. Tines

Grab Tines

Part No.

1.83 m (6'0")

9

7

F 008 B

1.98 m (6'6")

9

7

F 007 B

2.13 m (7'0")

10

8

F 006 B

2.29 m (7'6")

10

8

F 005 B


C/W High Tensile Steel Tines

Width

No. Tines

Part No.

1.98 m (6'6")

8

F 020

2.13 m (7'0")

8

F 019

2.29 m (7'6")

9

F 018

2.44 m (8'0")

10

F 017

2.74 m (9'0")

11

F 016

FORKS

Heavy Duty Manure Forks

Heavy Duty Forks C/W High Tensile Steel Tines For Handlers & Wheeled Loaders with Bolt on Grab

Width

No. Tines

Part No.

1.98 m (6'6")

8

F 025

2.13 m (7'0")

8

F 024

2.29 m (7'6")

9

F 023

2.44 m (8'0")

10

F 022

2.74 m (9'0")

11

F 021

13


FORKS

Short Tine Heavy Duty Manure Forks C/W High Tensile Steel Tines

Width

No. Tines

Part No.

1.98 m (6'6")

8

F 012

2.13 m (7'0")

8

F 011

2.29 m (7'6")

9

F 010

Short Tine Heavy Duty Manure Forks C/W High Tensile Steel Tines & Bolt on Grapple Open grab measurement – 1850 mm

14

Width

No. Tines

Part No.

1.98 m (6'6")

8

F 015

2.13 m (7'0")

8

F 014

2.29 m (7'6")

9

F 013


C/W Kverneland Tines Part No. – A 0008

Bolt on Kverneland side tines

Width

No. Tines

Part No.

2.29 m (7'6")

14

F 026

2.44 m (8'0")

15

F 027

2.74 m (9'0")

16

F 028

Bolt on 12" high spill guard

FORKS

High Capacity Grass Forks

F 029

Manure Forks For The Smaller Handlers C/W Kverneland Tines Part No. – A 0008

Bolt on Kverneland side tines

Width

No. Tines

Part No.

1.98 m (6'6")

9

F 035

2.13 m (7'0")

9

F 034

2.29 m (7'6")

10

F 033

15


FORKS

Extended Robust Stockmans Grab C/W Kverneland Tines Open grab measurement – 1850 mm All models fitted with one pair of side tines

Width

Base Tines

Grab Tines

Capacity

Part No.

1.83 m (6'0")

9

7

0.88 mÂł (31 CU/ft)

F 036

1.98 m (6'6")

9

7

0.93 m3

(33 CU/ft)

F 037

2.13 m (7'0")

10

8

1.02 m3 (36 CU/ft)

F 038

2.29 m (7'6")

10

8

1.1 m3 (39 CU/ft)

F 039

Large Heavy Duty Power Manure Fork High tensile steel grab and base tines. Base tines 50 mm (1.97") thick. Grab tines 40 mm (1.57"). Heavy duty box section tine rail. Three hinge attachment of grapple. Open grab measurement 1431 mm (56.34").

16

Width

Base Tines

Grab Tines

Part No.

1.83 m (6'0")

8

5

F 048

1.98 m (6'6")

9

5

F 049

2.13 m (7'0")

9

6

F 050

2.29 m (7'6")

10

6

F 051

2.44 m (8'0")

11

7

F 052


High tensile steel grab and base tines. Base tines 50 mm (1.97") thick. Grab tines 40 mm (1.57"). Heavy duty box section tine rail. Three hinge attachment of grapple. Open grab measurement 1822 mm (71.7").

Width

Base Tines

Grab Tines

Part No.

1.98 m (6'6")

8

5

F 047

2.13 m (7'0")

8

5

F 046

2.29 m (7'6")

9

6

F 045

2.44 m (8'0")

10

6

F 044

FORKS

Extra Large Heavy Duty Power Manure Fork

Bucket Grab with Hardox Grab Tines Heavy duty rehandlinbg bucket from 6 mm (0.24") plate. Heat treated welded in cutting edge. Bolt on side plates. Heavy duty hydraulic cylinders. Ideal for loading feeder / mixed wagons.

Width

Bucket Capacity (Level Fill)

Grab Capacity

Part No.

1.83 m (6'0")

0.7 m³ (24.72")

1 m³ (35.32")

F 053

1.98 m (6'6")

0.76 m³ (26.84")

1.09 m³ (38.49")

F 054

2.13 m (7'0")

0.82 m³ (28.96")

1.17 m³ (41.32")

F 055

2.29 m (7'6")

0.88 m³ (31.08")

1.25 m³ (44.14")

F 056

17


FORKS FOR TRACTOR FORE-END LOADERS

Forks for Quickie/ Trima/ Tanco/ Grays/ Bomford/ Zetor

Part No. Item

Width

Standard

Heavy Duty

6 Tine Fork

1.09 m (43")

3001

3005

7 Tine Fork

1.37 m (54")

3002

3006

8 Tine Fork

1.52 m (60")

3003

3007

9 Tine Fork

1.78 m (70")

3004

3008

10 Tine Fork

1.98 m (78")

n/a

3009

Forks for Chilton Loaders Prices as for Quickie / Trima with an additional surcharge.

Forks for David Brown L.Q.9 / G.D.90 with Limit Blocks All David Brown trip forks QD90, QR Part No. Item

Width

Standard

Heavy Duty

6 Tine Fork

1.09 m (43")

3010

3013

7 Tine Fork

1.37 m (54")

3011

3014

8 Tine Fork

1.52 m (60")

3012

3015

Forks for Farmhand Prices as for Quickie / Trima with an additional surcharge.

18


John Deere 175 P.A.O John Deere Euro Hook as for Quicke Item

Width

Part No. (Standard)

6 Tine Fork

1.22 m (48")

3016

7 Tine Fork

1.52 m (60")

3017

8 Tine Fork

1.83 m (72")

3018

9 Tine Fork

1.83 m (72")

3019

10 Tine Fork

2.03 m (80")

3020

Forks for Horndraulic Item Standard 6 Tine (between the jaws) Standard 7 Tine

Type

Part No.

Trip or Power

3021

Dual Type

3023

Power

3024

International 241 Fork Item International 241 Fork

Type

Part No.

Trip

3025

Mil Forks Item Standard 6 Tine

Type

Part No.

Trip or Power

3026

Dual Type

3027

FORKS FOR TRACTOR FORE-END LOADERS

Forks for John Deere 245 / 265

Massey Ferguson Forks Item

Type

Part No.

Standard 6 Tine

35/7 Trip

3028

Standard 6 Tine

48 & 80 Trip or Power

3029

Dual Type

3030

Wider Heavy Duty Forks

Call for details.

19


FORKS FOR TRACTOR FORE-END LOADERS 20

Parmiter Rear Loader Forks Item Standard 6 Tine

Type

Part No.

Trip or Power

3031

Quickie 2000 & Quickie Multi-H Forks Item Standard 6 Tine

Type

Part No.

Trip or A Frame

3032

Dual Type

3033

All Other Specified Forks Manufactured An example being Silage Forks for front-end loaders. Just phone our sales team on +44 (0) 1639 360587

Strong Short Tine Silage / Manure Forks With Grapples Especially suitable for the smaller fore-end loaders. Open grab measurement – 907 mm

Width

Volume

Straight Tines

Curved Tines

Hydraulic Rams

Part No.

1.09 m (43")

0.34 m³ (12.01 CU/ft)

6

4

1

S.T. 1

1.22 m (48")

0.38 m³ (13.42 CU/ft)

7

4

1

S.T. 2

1.22 m (48")

0.38 m³ (13.42 CU/ft)

7

4

2

S.T. 3

1.36 m (54")

0.42 m³ (14.83 CU/ft)

7

4

2

S.T. 4

1.36 m (54")

0.42 m³ (14.83 CU/ft)

8

5

1

S.T. 5

1.36 m (54")

0.42 m³ (14.83 CU/ft)

8

5

2

S.T. 6

1.52 m (60")

0.46 m³ (16.25 CU/ft)

8

5

2

S.T. 7

1.52 m (60")

0.46 m³ (16.25 CU/ft)

9

5

2

S.T. 8

1.68 m (66")

0.51 m³ (18.01 CU/ft)

9

5

2

S.T. 9

1.68 m (606)

0.51 m³ (18.01 CU/ft)

10

6

2

S.T. 10

1.83 m (72")

0.55 m³ (19.42 CU/ft)

10

6

2

S.T. 11


Open Grab Measurement – 965 mm Width

Volume

Straight Tines

Curved Tines

Hydraulic Rams

Part No.

1.09 m (43")

0.42 m³ (14.83 CU/ft)

6

4

1

S.F. 1

1.22 m (48")

0.47 m³ (16.60 CU/ft)

7

4

1

S.F. 2

1.36 m (54")

0.53 m³ (18.72 CU/ft)

8

5

1

S.F. 3

1.36 m (54")

0.53 m³ (18.72 CU/ft)

8

5

2

S.F. 4

1.52 m (60")

0.58 m³ (20.72 CU/ft)

9

5

2

S.F. 5

1.68 m (66")

0.64 m³ (22.60 CU/ft)

10

6

2

S.F. 6

1.83 m (72")

0.70 m³ (24.72 CU/ft)

11

6

2

S.F. 7

All models use KVERNELAND tines and sleeve on top and bottom tine rails.

FORKS FOR TRACTOR FORE-END LOADERS

Strong Manure Forks With Grapples

21


FORKS FOR TRACTOR FORE-END LOADERS 22

Robust Stockman’s Grabs For Tractor Fore-End Loaders 6 Models from 1.22 m (48") – 2.13 m (83.86") wide. Supplied with weld-on brackets to fit all makes of fore-end loaders. All models use Kverneland tines and sleeves on the top and bottom tine rail. Curved tines and 300 mm (11.81")Rams used for easy penetration of the silage. Prices include side tines and brackets. Call of details on Bolt on Brackets. Open grab measurement – 965 mm (40")

Width

Volume

Straight Tines

Curved Tines

Side Tines

Hydraulic Rams

Part No.

1.22 m (48")

0.47 m³ (13.42 CU/ft)

6

4

2

1

S.G. 1

1.22 m (48")

0.47 m³ (13.42 CU/ft)

7

4

2

1

S.G. 2

1.22 m (48")

0.47 m³ (13.42 CU/ft)

7

4

2

2

S.G. 3

1.36 m (54")

0.53 m³ (18.72 CU/ft)

8

5

1

1

S.G. 4

1.36 m (54")

0.53 m³ (18.72 CU/ft)

8

5

2

2

S.G. 5

1.52 m (60")

0.58 m³ (20.48 CU/ft)

9

5

2

2

S.G. 6

1.68 m (66")

0.64 m³ (22.60 CU/ft)

10

6

2

2

S.G. 7

1.83 m (72")

0.70 m³ (24.72 CU/ft)

11

6

2

2

S.G. 8

1.98 m (78")

0.76 m³ (26.84 CU/ft)

12

7

2

2

S.G. 9

2.13 m (84")

0.82 m³ (28.96 CU/ft)

13

8

2

2

S.G. 10

2.28 m (90")

0.88 m³ (31.08 CU/ft)

14

8

2

2

S.G. 11


For handling round bales. Open grab measurement – 1118 mm (44")

Width

Volume

Straight Tines

Curved Tines

Side Tines

Hydraulic Rams

Part No.

1.22 m (48")

0.47 m³ (13.42 CU/ft)

7

4

2

2

E.W. 1

1.36 m (54")

0.53 m³ (18.36 CU/ft)

8

5

2

2

E.W. 2

1.52 m (60")

0.58 m³ (20.48 CU/ft)

9

5

2

2

E.W. 3

1.68 m (66")

0.64 m³ (22.60 CU/ft)

10

6

2

2

E.W. 4

1.83 m (72")

0.70 m³ (24.72 CU/ft)

11

6

2

2

E.W. 5

1.98 m (78")

0.76 m³ (26.84 CU/ft)

12

7

2

2

E.W. 6

2.13 m (84")

0.82 m³ (28.96 CU/ft)

13

8

2

2

E.W. 7

FORKS FOR TRACTOR FORE-END LOADERS

Extra Wide Throat Stockman’s Twin Ram Grabs

23


BALE HANDLING

Heavy Duty Bale Spikes For Material Handling Includes weld on brackets Please Note – Ref. Merlo & CAT Material Hanglers The prices do not include the installation and complete hosing up of a double pilot operated check valve for the above handlers. This can be carried out at an additional price of P.O.A. Double pilot operated check valves can be supplied at P.O.A

Item Double Bale Spike – 4 Tine 2 No 980mm Conus II Tines, 2 No 600mm, Conus I Tines For Handling 2 Round or 2 Rectangular Bales

M 1001

Single Bale Spike – Twin Tine 1 No 980mm Conus II Tines, 1 No 600mm Conus I Tines For Handling 1 Round or 1 Rectangular Bale

M 1002

H.D. Rectangular Bale Stacker 3 No 980mmConus II Tines For Handling 2 Large Rectangular Bales

24

Part No.

With Brackets

M 1012

No Brackets

M 1013


Inverted “T”

BALE HANDLING

Rear Mounted Bale Spikes

Triangular Bale Spike

Rectangular Frame

Part No.

With Conus II 980mm Tine Only

With Conus II – 9800mm Tine & Conus 1-600mm. Anti Rotation Tine.

Inverted “T” Cat1 or Cat2

1001

1001 A

Triiangular Big Bale Spike Cat1 or Cat2

1002

1002 A

Rectangular Frame Cat1 or Cat2

1003

1003 A

Item

Rear Mounted Twin Bale Spike For 2 Round Bales or 1 Rectangular Bale Item 2 No. X 610mm Conus II Tines CAT2 2 x 980mm Conus II Tines

Part No. 1004

25


BALE HANDLING 26

Bale Spikes for Tractor Fore End Loaders Part No. 1 No. Round Bale 980mm Tine Only Conus II

1 No. Round Bale 980mm Tine Conus II and 1 x 600mm Tine I

D 1000/1010 2x1000mm Tines Conus I

For 2 No. Round Bales and Large Rectangular Bales 2x980 and 2x600

No Brackets fitted, Bale Spike Only

1005

1012

1019

1026

With Quicke No. 3 Brackets

1006

1013

1020

1027

With Trima Grays, Tanco Q.A.

1007

1014

1021

1038

With Zetor, Euro, Feaucheux, Riko, Stoll, J.Deere Euro, Bomford, Quicke Pin Fitting

1008

1015

1022

1029

With Suire, Milpower, Horndraulic, Chilton

1009

1016

1023

1030

M/F 80, ect with Tanco Pin Type, J.Deere 245/175, David Brown 1 Ram and 2 Ram

1010

1017

1024

1031

Farmhand David Brown Q.A.

1011

1018

1025

1032

1005

1012

1019

1026


Simple and strong. Rollers can be removed to give a twin tine bale carrier. Lift Capacity of 1100Kg. Available with weld-on or bolt-on brackets. Available from stock.

Item

BALE HANDLING

Round Bale Handlers

Part No.

Round Bale Handlers

00011

Round Big Bale Unwinder Made to the highest standards. Brackets to suit all fore-end loaders and material handlers. Bi-directional operation. Fitted with cross-over relief valve to suit all hydraulic system up to 3500 PSI.

Item Round Big Bale Unwinder

Part No. RBB

27


SPECIAL ATTACHMENTS

Tipping Skip High quality pallet fork mounted skip with full four way fork entry Overall length = 1.76 m (5'9") Overall Width = 1.27 m (4'2") Overall Height = 1.22 m (4') Weight = 280 Kg Capacity = 1.1 m続 (39 CU/ft)

Item

Part No.

Tipping Skip

T 001

Fly Jibs C/W Swivel hook and shackle. C/W Test certificate.

28

Extension

Lift Capacity

Part No.

3 m (10'0")

375 Kg

J 001

4 m (13'1")

275 Kg

J 002


Evans & Reid Man Baskets come complete with a test certificate.

Item

Part No.

Double Man (2 x 1 x 1.1 m)

Gated

Direct Mounted

M 001

Double Man ( 2 x 1 x 1.1 m)

Non–Gated

Direct Mounted

M 002

Single Man (1.2 x 1 x 1.1 m)

Gated

Fork Mounted

M 003

Single Man (1.2 x 1 x 1.1 m)

Non-Gated

Fork Mounted

M 004

SPECIAL ATTACHMENTS

Man Platforms

29


PALLET FORKS

Pallet Fork Carriage With Forks

Lift Capacity

Class ITA

Part No.

2.0 Tonne

2

P 004

3.0 Tonne

2

P 005

3.0 Tonne

3

P 006

A full range of replacement pallet forks at competitive prices.

Pallet Fork Carriage Without Forks We can supply pallet forks for most telehandlers. We also straighten bent pallet forks and retest them.

30

Lift Capacity

Class ITA

Part No.

2.0 Tonne

2

P 001

3.0 Tonne

2

P 002

3.0 Tonne

3

P 003


C/W Swivel hook and shackle. C/W Test certificate.

Part No. for Fork Widths Length

100 mm (3.9")

125 mm (4.9")

150 mm (5.9")

1.524 m (60")

A 0011

A 0012

A 0013

1.829 m (72")

A 0014

A 0015

A 0016

2.000 m (79")

A 0017

A 0018

A 0019

PALLET FORKS

Heavy Duty Drive In Fork Extensions To Suit Fork Width

IMPORTANT SAFETY NOTICE Fork extension sleeves should never be more than 1.5x the fork blade length.

Pallet Fork Carriage With Forks For Tractor Loaders Also available with three point linkage brackets.

3 Point Linkage

Lift Capacity

Class ITA

Part No.

1.5 Tonne

2

4001

2.0 Tonne

2

4002

2.5 Tonne

2

4003

31


PALLET FORKS

Replacement Tine Rails With Kverneland Sleeves Welded In Size

Type

Part No.

80 mm x 80 mm

Box Section

6 Conus I Sleeves

A 0022

80 mm x 80 mm

Box Section

7 Conus I Sleeves

A 0023

80 mm x 80 mm

Box Section

8 Conus I Sleeves

A 0024

80 mm x 80 mm

Box Section

9 Conus I Sleeves

A 0025

80 mm x 80 mm

Box Section

10 Conus I Sleeves

A 0026

80 mm x 80 mm

Box Section

9 Conus II Sleeves

A 0027

80 mm x 80 mm

Box Section

10 Conus II Sleeves

A 0028

100 mm x 50 mm

Tine Rails Available

100 mm x 60 mm

Tine Rails Available

Shear Grab Replacement Tine Rails With Kverneland Sleeves Item

32

Part No.

Parmiter SG 100 Grab

A 0029

Parmiter SG 100 Grab

A 0030

Parmiter SG 100 Grab

A 0031

Parmiter SG 100 Grab

A 0032

Parmiter SG 100 Grab

A 0033


For Tractor Loaders, Diggers and Material Handlers With lever locking mechanism. Hydraulic locking / Manual pole.

Quicke No.2 System

Quicke No.3 Hooks

Manitou

Quicke No.3 Hooks

CAT Telescopic

Sanderson

QUICK HITCH

Quick Hitch Frames

Also, Quick Hitch frames for M/F Diggers, JCB 3CX ect.

Weight Box Assembly With Three Point Linkage And Adjustable Parking Legs

Item Weight Box Assembly

Part No. A 0051

33


QUICK HITCH

Quicke E Tractor Loader Mounting Brackets Please note that spacers can be supplied for fitting tractor loaded mounting brackets to international tractors.

Bracket Type

Tractor

Quicke E Loader

Case International 1290/ 1294/ 1390/ 1394 – 4.W.D

A 0034

Quicke E Loader

Case International 1490/ 1494 – 4.W.D (Kit Form Only)

A 0035

Quicke E Loader

Fiat L65/ L75/ L85/ L95 – 4.W.D

A 0036

Quicke E Loader

Ford 4835/ 5635/ 6635/ 7635 – 4.W.D, TL80/ TL90/ T1100 – 4.W.D

A 0037

Quicke E Loader

Ford 5600/ 5610/ 6600/ 6610/ 7600/ 7610/ 6410/ 6810 – 4.W.D

A 0038

Quicke E Loader

Ford 5030 – 4.W.D

A 0039

Quicke E Loader

Ford 4630 – 4.W.D

A 0040

Quicke E Loader

Ford 5640/ 6640/ 7740 – 4.W.D, TS 90/ TS 100/ TS 110

A 0041

Quicke E Loader

International 585/ 685/ 785/ 885/ 985/ 595/ 695/ 795/ 895/ 995 – LP/ XL 4.W.D

A 0042

Quicke E Loader

International 3200/ 3220/ 4210/ 4220/ 4230/ 4240 – LP/ XL 4.W.D

A 0043

Rear axle extension to fit International 85/ 95 LXL Series – 4.W.D. and International 3220/ 3200/ 4210/ 4230/ 4240 – 4.W.D

A 0044

Quicke E Loader

M/ F 375/ 398/ 390/ 390T – 4.W.D.

A 0045

Quicke E Loader

Zetor 5945/ 6045/ 6945/ 7045 – 4.W.D

A 0046

Quicke E Loader

Zetor 4320/ 4340/ 5320/ 5340/ 6320/ 6340/ 7320/ 7340 – 4.W.D

A 0048

Quicke E Loader

Zetor 3 Cyl Models 4.W.D / 2.W.D (Kit Form Only)

A0049

Rear Axle Extensions to fit 4 Cyl Zetor Models

34

Part No.

A 0050


Fitted With I.T.A Forks Lift Capacity – 1.9 tonnes I.T.A. Class 2A

Item

Part No.

Industrial Pallet Fork Carridges (with I.T.A Forks)

SBPF

Skid Steer Much Forks Fitted With Kverneland (KV) Tines Width

Small Forks

Medium Forks

Large Forks

Tine Number

Part No.

0.91 m (36")

6

SSSF / 36

1.02 m (40")

6

SSSF / 40

1.07 m (42")

6

SSSF / 42

1.12 m (44")

6

SSSF / 44

1.22 m (48")

7

SSSF / 48

1.37 m (54")

7

SSSF / 54

1.52 m (60")

8

SSSF / 60

1.68 m (66")

9

SSSF / 66

1.52 m (60")

8

SSSF / 60

1.68 m (66")

9

SSSF / 66

1.85 m (73")

10

SSSF / 73

SKID STEER ATTACHMENT

Skid Steer Industrial Pallet Fork Carriages

Strong Short Tine Silage / Manure Forks

35


SKID STEER ATTACHMENT

Strong Short Tine Silage / Manure Forks With Grapples All models use Kverneland tines and sleeves on top and bottom tine rails.

Width

Volume

Straight Tines

Curved Tines

Hydraulic Rams

Part No.

1.09 m (43")

0.34 m³ (12.01 CU/ft)

6

4

1

SSMFG 01

1.22 m (48")

0.38 m³ (13.42 CU/ft)

7

4

1

SSMFG 02

1.22 m (48")

0.38 m³ (13.42 CU/ft)

7

4

2

SSMFG 03

1.36 m (54")

0.42 m³ (14.83 CU/ft)

7

4

2

SSMFG 04

1.36 m (54")

0.42 m³ (14.83 CU/ft)

8

5

2

SSMFG 05

1.52 m (60")

0.46 m³ (16.25 CU/ft)

8

5

2

SSMFG 06

1.52 m (60")

0.46 m³ (16.25 CU/ft)

9

5

2

SSMFG 07

1.68 m (66")

0.51 m³ (18.01 CU/ft)

9

5

2

SSMFG 08

1.68 m (66")

0.51 m³ (18.01 CU/ft)

10

6

2

SSMFG 09

1.83 m (72")

0.55 m³ (19.42 CU/ft)

10

6

2

SSMFG 10

Loader Forks C/W Grapples (Fitted with KV Base Tines)

Small

36

Intermediate

Large


C/W Grapples (Fitted with KV Base Tines) Width

Small Forks (Single Ram)

Medium Forks (Single Ram)

Large Forks (Twin Ram)

Tine Number

Part No.

0.91 m (36")

6

SSSFG / 36

1.02 m (40")

6

SSSFG / 40

1.07 m (42")

7

SSSFG / 42

1.12 m (44")

7

SSMFG / 44

1.22 m (48")

7

SSMFG / 48

1.37 m (54")

7

SSMFG / 54

1.52 m (60")

8

SSMFG / 60

1.68 m (66")

9

SSMFG / 66

1.52 m (60")

8

SSLFG / 60

1.68 m (66")

9

SSLFG / 66

1.85 m (73")

10

SSLFG / 73

Skid Steer Dirt Buckets Width

Capacity

Teeth

Part No.

0.91 m (36")

0.14 m³ (5 CU/ft)

0

SSDB / 36

1.07 m (42")

0.16 m³ (5.8 CU/ft)

0

SSDB / 42

1.22 m (48")

0.19 m³ (6.6 CU/ft)

0

SSBD / 48

1.37 m (54")

0.25 m³ (8.8 CU/ft)

0

SSBD / 54

1.52 m (60")

0.3 m³ (10.6 CU/ft)

0

SSBD / 60

1.68 m (66")

0.41 m³ (14.4 CU/ft)

0

SSBD / 66

1.85 m (73")

0.56 m³ (19.7 CU/ft)

0

SSBD / 73

0.91 m (36")

0.14 m³ (5 CU/ft)

4

SSBDT / 36

1.07 m (42")

0.16 m³ (5.8 CU/ft)

4

SSBDT / 42

1.22 m (48")

0.19 m³ (6.6 CU/ft)

5

SSBDT / 48

1.37 m (54")

0.25 m³ (8.8 CU/ft)

6

SSBDT / 54

1.52 m (60")

0.3 m³ (10.6 CU/ft)

7

SSBDT / 60

1.68 m (66")

0.41 m³ (14.4 CU/ft)

8

SSBDT / 66

1.85 m (73")

0.56 m³ (19.7 CU/ft)

9

SSBDT / 73

SKID STEER ATTACHMENT

Loader Forks

37


SKID STEER ATTACHMENT

Skid Steer Utility Buckets With Grapples All models use Kverneland tines and sleeves on top and bottom tine rails. Width

Volume

Teeth

Part No.

0.91 m (36")

0.18 m³ (6.5 CU/ft)

0

SSUB / 36

1.07 m (42")

0.22 m³ (7.6 CU/ft)

0

SSUB / 42

1.22 m (48")

0.26 m³ (9.2 CU/ft)

0

SSUB / 48

1.36 m (54")

0.37 m³ (13 CU/ft)

0

SSUB / 54

1.52 m (60")

0.42 m³ (14.8 CU/ft)

0

SSUB / 60

1.68 m (66")

0.47 m³ (16.5 CU/ft)

0

SSUB / 66

1.85 m (73")

0.78 m³ (27.5 CU/ft)

0

SSUB / 73

Width

Teeth

Part No.

1.22 m³ (48")

0

SSIG / 48

1.36 m³ (54")

0

SSIG / 54

1.52 m³ (60")

0

SSIG / 60

1.68 m³ (66")

0

SSIG / 66

Skid Steer Industrial Grapples

Single Ram

Twin Ram

Skid Steer Bale Spikes Item

38

Part No.

Bale Spike complete with one 0.97 m (38") Kv Tine

SSBS / 1

Bale Spike complete with one 0.97 m (38") Kv Tine and one 0.61 m (24") Kv anti-rotation Tine

SSBS / 2


Evans & Reid Ltd. Staffordshire Warehouse, Canal Road, Neath, West Glamorgan, SA11 1LJ, United Kingdom. Tel: [+44] (0) 1639 630587 Fax: [+44] (0) 1639 633315 Simon.Reid@miniexcavatorcentre.com www.telehandlercentre.com

Design & Manufacture of High Quality Attachments for Tractors, Telescopic Handlers, Skid Steer Loaders & Articulated Loaders

Evans & Reid Ltd. Agricultural Catalogue