Issuu on Google+

Technical Information Sheet

2K MOTOCRYL 60 LINE Field of application

:

Passenger cars, commercial vehicles, coaches, equipment, etc.

Chemical basis

:

Two component polyurethane finish.

General qualities

:

High gloss 2-pack polyurethane finish, both, air drying or force drying. 60-10 Super White is a high covering power white that is used in color formulations with a high content of white. 60-01 Fleet Additive can be used for commercial vehicles or large areas. Motomix give you the option to mix the formula with or without 60-01. NOTE: Do not add extra 60-01! This can slow down the drying process considerably!

Auxiliary materials

: MS Hardeners 30-60/ -70/ -80 2K Hardener 30-90 HS Hardener 39-60/ -70/ -80 Reducer 35-15, 35-25 For special purposes: 2K Matting Agent 20-50 2K Flexing Agent 20-40

Physical qualities Density

:

1.04 – 1.4 kg/L.

Flashpoint

:

Closed cup 29°C to 30°C (84.2°F to 86°F)

Vol. % Solid contents

:

52% - 55% depending on colour.

Economy

:

Approx. 7 m²/L./50 чm

Finish

:

High gloss.

Substrate

:

As described in the preparation system. Combined with suitable primer on: degreased and sanded coatings of old paint, steel, galvanised steel, aluminium and polyester.

Undercoat

:

All Automotive Art Primers and Surfacers. Except Washprimers 45-15

Cleaning the equipment

:

NC Lacquer Thinner 6-051

Colour

:

Motocryl 60 Line in MotoMix software

Storage life

:

Under normal storage conditions for up to two years (unopened tins).

The technical data in these publications are based on our present knowledge and give you an idea of the various applications without obligation [Mar-11]


Technical Information Sheet

2K MOTOCRYL 60 LINE APPLICATION DATA Mixing ratio

:

2:1 with MS/2K Hardener 30-60/ -70/ -80/ -90 3:1 with HS Hardener 39-60/ -70/ -80

Applicationviscosity

:

At 20°C DIN Cup 4 Airspray : 18 sec. Pressure tank : 18 sec. With 5-10% Reducer 35-15

: Gravity feed Suction feed Pressure tank

Spray nozzle (mm) 1.3 – 1.5 1.6 – 1.8 1,0 - 1,2

Spray coats/ coat thickness

:

1½ - 2 40 - 60 microns

Flash-off time

:

5 - 15 min. at 20°C.

Drying

:

60°C 20°C 8 - 12hours 20 - 30min.

Potlife

:

Approx. 20min. - 5 hours at 20°C.

Product information

:

Pressure (bar) 3.5 – 4.5 bar (50 – 65 psi) 3.5 – 4.5 bar (50 – 65 psi) 4,0 - 5,0

MS/2K Hardeners 30-60, 30-70, 30-80, 30-90 HS Hardener 39-60, 39-70, 39-80 Reducer 35-15 2K Matting Agent 20-50 All Automotive Art Primers and Surfacers 2K Flexing Agent 20-40

The technical data in these publications are based on our present knowledge and give you an idea of the various applications without obligation [Mar-11]


Technical Information Sheet

The technical data in these publications are based on our present knowledge and give you an idea of the various applications without obligation [Mar-11]


Meguiars