Page 1

TRAFFIC DOORS T H AT R E A L LY

TAKE THE

IMPACT

.com


l-Lite TM

Stee

XHD

AIS-

175

AIS-

-175

XHD

75

HD-1

75

FD-1

75

RD-1

00

FS-5

50

FS-2

na

Mag

a

Supr

ma

Opti

r-Va lu

Clea


WIDTH CLEAR 1/2” CLEARANCE

DOUBLE ACTING SPRING BUTT HINGE

8-1/2”

HEIGHT CLEAR

A 60” FLOOR TO CENTER OF WINDOW

A

SECTION A-A FORMED EDGE

8-1/2” 1/2” CLEARANCE

.com


+

+

.com


Frame not included


TOP MOUNTING PLATE GALVANIZED TOP FRAME

ADJUSTABLE TORSION SPRING

JAMB 3/8" THICK CLEAR FLEXIBLE PVC

GALVANIZED FULL-LENGTH VERTICAL FRAME 3/8" THICK CLEAR OR OPAQUE FLEXIBLE PVC

LOWER THREADED ADJUSTER

BOTTOM MOUNTING PLATE

.com


TL250 MODEL

TM

TL250 MODEL

RS:

TH

1/8" THICK ABS IMPACT PANEL

1/4" THICK ABS IMPACT FACING

CLEAR

TL250 MODEL

TM

TM

ALUMINUM BACK CAP

3/4" CLEARANCE

NUMBER OF PAIRS:

NUMBER OF PAIRS:

6" WIDE X 1/4" THICK BACK STRIP BOTH SIDES

SECTION "AA"

WIDTH CLEAR

WIDTH

1/4" THICK ABS IMPACT FACING

CLEAR

1/8" THICK ABS IMPACT PANEL

1/8" THICK 1/4" THICK ABS IMPACT ABS IMPACT ALUMINUM BACK CAPPANEL FACING

ALUMINUM BACK CAP

3/4" CLEARANCE 3/4" CLEARANCE

"A"

6" WIDE X 1/4" THICK BACK STRIP BOTH SIDES

STEEL ANGLE MOUNTED TO HEADER AND JAMB

"A"

6" WIDE X 1/4" THICK BACK STRIP BOTH SIDES

SECTION "AA" OPTIONAL 48" HIGH 1/8" THICK ABS WEAR PANEL

SECTION "AA"

HARDWARE COVER

1/8" THICK ABS IMPACT PANEL

BOTTOM MOUNTING BRACKET

S:

CLEAR HEIGHT

ALUMINUM BACK CAP

"A"

4'-6" STD.

OR THICKNESS NEL EACH LEAF DWARE MOST JAMB CONSTRUCTIONS) R FACING: D GREY [ ] BLACK [ ] Y[] GUARD WITH BOTTOM PIVOT

HEIGHT

TOP MOUNTING BRACKET

4'-6" STD.

JAMB 1/4" THICK ABS FACING

S

CLEAR

1/2" FLOOR CLEARANCE

LEVATION OF DOORS

"A"

MINUM FRAME

LS - COLOR: 36" [ ] 48" HIGH

G COLORS AVAILABLE TORY)

ELEVATION OF DOORS 6" WIDE X 1/4" THICK BACK STRIP BOTH SIDES

GLAZED): RD)

)

WIND LOADS:

RING

OPTIONAL 48" HIGH 1/8" THICK ABS WEAR PANEL

1/2" FLOOR CLEARANCE

ECIFY LOCATION) COLOR:

STANDARD FEATURES 8 3/4" STEEL JAMB GUARD

MOUNTING DETAIL OFFSET PIVOT HARDWARE DOOR ROTATED FOR CLARITY

STEEL ANGLE MOUNTED TO HEADER AND JAMB

"A"

1/2" FLOOR CLEARANCE

- 1/4" MINIMUM DOOR THICKNESS ELEVATION OF DOORS - 8" x 10" VISION PANEL EACH LEAF - OFFSET PIVOT HARDWARE FEATURES (SUITABLE STANDARD FOR MOST JAMB CONSTRUCTIONS) - PERMANENT COLOR FACING: - 1/4" MINIMUM DOOR BEIGE [ ] CLOUD GREY [ ] BLACK [ ] THICKNESS CHARCOAL- GREY [ ] VISION PANEL EACH LEAF 8" x 10" - 8 3/4" STEEL JAMB GUARD WITHHARDWARE BOTTOM PIVOT - OFFSET PIVOT

(SUITABLE FOR MOST JAMB CONSTRUCTIONS) OPTIONAL FEATURES: - PERMANENT COLOR FACING: [ ] PRE-HUNG IN ALUMINUM BEIGE [ ]FRAME CLOUD GREY [ ] BLACK [ ] CHARCOAL [ ] ABS IMPACT PANELS - COLOR: GREY [ ] [ ] 12" [ ] 24" ] 36" STEEL [ ] 48" HIGH - 8[3/4" JAMB GUARD WITH BOTTOM PIVOT

STEEL ANGLE MOUNTED TO HEADER AND JAMB

"A" HARDWARE COVER

OPTIONAL 48" HIGH 1/8" THICK ABS WEAR PANEL 1/4" THICK ABS FACING

HARDWARE COVER JAMB TOP MOUNTING BRACKET

JAMB 1/4" THICK ABS FACING

ALUMINUM BACK CAP

1/8" THICK ABS IMPACT PANEL

.com

BOTTOM MOUNTING BRACKET

1/8" THICK ABS IMPACT

TOP MOUNTING BRACKET

ALUMINUM BACK CAP

BOTTOM MOUNTING


SLEN-DORSLEN-DOR MODEL MODEL SERIES II SERIES II

SLEN-DOR MODEL SERIES II

TM

IRS: WIDTH

VINYL NOSING

CLEAR

ALUMINUM BACK CAP

FACING

3/4" CLEARANCE

NUMBER OF PAIRS: NUMBER OF PAIRS: JAMB

WIDTH

SOLID, HIGH DENSITY CORE

CLEAR WIDTH

VINYL NOSING

CLEAR

VINYL FACING NOSING

ALUMINUM FACING BACK CAP

3/4" CLEARANCE

3/4" CLEARANCE

SECTION "AA"

ALUMINUM BACK CAP JAMB

SOLID, HIGH DENSITY CORE

SOLID, HIGH DENSITY CORE

STEEL ANGLE MOUNTED TO HEADER AND JAMB

"A"

SECTION "AA"

SECTION "AA"

"A"

BOTTOM MOUNTING BRACKET

- HEIGHT - COLOR [ ] STAINLESS STEEL

8 3/4" STEEL JAMB GUARD

MOUNTING DETAIL OFFSET PIVOT HARDWARE DOOR ROTATED FOR CLARITY

CLEAR

STEEL ANGLE MOUNTED TO HEADER AND JAMB

"A" HARDWARE COVER

"A"

"A" HARDWARE COVER JAMB

ELEVATION OF DOORS

DED LINEAR POLYETHYLENE) "[ ] 24"[ ] 36"[ ] 48"[ ]

BLE GLAZED):

"A"

1/2" FLOOR CLEARANCE

URES:

L

HEIGHT

ALUMINUM BACK CAP

STEEL ANGLE MOUNTED TO HEADER AND JAMB

4'-6" STD.

T PIVOT HARDWARE FY COLOR [ ] LAMINATE NUM [ ] STAINLESS STEEL

HEIGHT

ELEVATION OF DOORS

JAMB TOP MOUNTING BRACKET

4'-6" STD.

1/2" FLOOR CLEARANCE

CLEAR

HARDWARE COVER

URES HICKNESS, WITH A SELECTION OF ALS " STANDARD VISION PANEL

"

TM

TM

TOP MOUNTING BRACKET

1/2" FLOOR CLEARANCE

ELEVATION OF DOORS

STANDARD FEATURES - 3/4" OVERALL THICKNESS, WITH A SELECTION OF FACING MATERIALS - 11 1/2" X 15 1/2" STANDARD VISION PANEL EACH LEAF FEATURES - GRAVITYSTANDARD OFFSET PIVOT HARDWARE OVERALL - FACING-- 3/4" SPECIFY COLOR THICKNESS, WITH A SELECTION OF FACING MATERIALS [ ] ABS PLASTIC [ ] LAMINATE 1/2" X 15[ ]1/2" STANDARD [ ] FRP [-] 11 ALUMINUM STAINLESS STEEL VISION PANEL [ ] OTHEREACH LEAF

- GRAVITY OFFSET PIVOT HARDWARE - FACING - SPECIFY COLOR OPTIONAL FEATURES:

ALUMINUM BACK CAP

BOTTOM MOUNTING BRACKET

JAMB TOP MOUNTING BRACKET

ALUMINUM BACK CAP

.com

BOTTOM MOUNTING BRACKET


ULTRA-LITE MODEL

TM

ULTRA-LITE MODEL

NOSING

TH

TOUGH PLASTIC FACING

ULTRA-LITE WITH OFFSETMODEL PIVOT HARDWARE WITH OFFSET PIVOT HARDWARE

MOUNT ASSEMBLY

NOSING

NUMBER OF PAIRS:

CLEAR

NOSING

NUMBER OF PAIRS:

E

WIDTH

CLOSED CELL STYROFOAM CORER

WIDTH

JAMB AIR SEAL

SECTION "AA"

TM

TM

WITH OFFSET PIVOT HARDWARE

TOUGH PLASTIC FACING TOUGH PLASTIC FACING

MOUNT ASSEMBLY

MOUNT ASSEMBLY

CLEAR

CLEAR

3/4" CLEARANCE 3/4" CLEARANCE

R

CLOSED CELL STYROFOAM CORE CLOSED CELL STYROFOAM CORER

JAMB AIR SEAL

SECTION "AA" SECTION "AA"

JAMB AIR SEAL

STEEL ANGLE MOUNTED TO HEADER AND JAMB

STEEL ANGLE MOUNTED TO HEADER ANDANGLE JAMB MOUNTED STEEL

HARDWARE COVER

"A"

TO HEADER AND JAMB

"A" HARDWARE COVER

JAMB

"A"

TOP MOUNTING BRACKET

"A"

1/8" THICK ABS FACING

HARDWARE COVER

"A"

"A" JAMB

EXTRUSION WITH LOOP SEAL

TOP MOUNTING BRACKET 1/8" THICK ABS FACING

8 3/4" JAMB GUARD

EVATION OF DOORS

ELEVATION OF DOORS LOWER PIVOT PIN

PENING (+0",-1/8" TOLERANCE)

AME...............................[ ] HYLENE R

TS ......................

OADS: .........................[ ]

EXTRUSION WITH LOOP SEAL

8 3/4" JAMB GUARD

1/2" FLOOR CLEARANCE

TER SEALS G - SPECIFY COLOR

....................

EXTRUSION WITH LOOP SEAL

1/8" THICK ABS FACING

OVERALL DOOR THICKNESS N PANEL EACH LEAF WITH

JAMB TOP MOUNTING BRACKET

MOUNTING DETAIL OFFSET PIVOT HARDWARE

1/2" FLOOR STANDARD FEATURES

8 3/4" STEEL JAMB GUARD

WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED RADIUS CORNER GASKETED - STANDARD 7 1/2" x 10 1/2"................................. 11 1/2" x 15 1/2"............................... 16" x 18".............................................. 24" x 24"..............................................

8 3/4" JAMB GUARD

LOWER PIVOT PIN

- 14" X 16" STANDARD VISION PANEL EACH LEAF WITH RADIUS GASKET OPTIONAL EXTRAS: - REMOVABLE FULL PERIMETER SEALS PRE-HUNG IN ALUMINUM - PERMANENT COLOR FACINGFRAME...............................[ - SPECIFY COLOR ] BUMPERS MOLDED POLYETHYLENE - OFFSET PIVOT HARDWARE HEIGHT 12"[TO ] 24"[ OTHER (+0",-1/8" TOLERANCE) - MANUFACTURED FIT ]OPENING

DOOR ROTATED FOR CLARITY

[ ]

[STD]

CLEARANCE - FULLY INSULATED, 1 3/4" OVERALL DOOR THICKNESS - 14" X 16" STANDARDELEVATION VISION PANEL LEAF WITH OFEACH DOORS RADIUS GASKET - REMOVABLE FULL PERIMETER SEALS STANDARD FEATURES - PERMANENT COLOR FACING - SPECIFY COLOR OFFSET PIVOT1 HARDWARE - FULLY -INSULATED, 3/4" OVERALL DOOR THICKNESS - MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE)

[ [ [ [

] ] ] ]

36"[ ] 48"[ ] IMPACT PANELS

OPTIONAL EXTRAS: PAD TYPE ..................................................... PRE-HUNG IN ALUMINUM FRAME...............................[ ] JAMB GUARDS WITH CUTOUTS BUMPERS - MOLDED POLYETHYLENE 3" DEEP x 8 3/4" HIGH................................ HEIGHT 12"[ ] 24"[ ] OTHER 36"[ ] 48"[ ]

LOWER PIVOT

.com

MOUNTING DETAIL PIN OFFSET PIVOT HARDWARE

8 3/4" STEEL JAMB GUARD

DOOR ROTATED FOR CLARITY

[ ]

[STD]

WINDOWS (DOUBLE-GLAZED): MOUNTING DETAIL

POLYCARBONATE - 1/8" THICK, PIVOT FLUSH MOUNTED OFFSET HARDWARE RADIUS CORNER GASKETED - STANDARD

8 3/4" STEEL JAMB GUARD


STANDARD MODEL HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE

SECTION "AA"

JAMB AIR SEAL

SAFETY CUSHION NOSING PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & HORIZONTAL STRENGTH

"A"

POLY-KOR POLY-KOR NUMBER OF PAIRS:

NEOPRENE IMPREGNATED INSULATION

TOUGH PLASTIC FACING TOUGH PLASTIC FACING

SAFETY SAFETY CUSHION CUSHION NOSING NOSING

FLEXIBLE, POLYMER FOAM INSULATION FLEXIBLE, POLYMER FOAM INSULATION FLEXIBLE, POLYMER FOAM INSULATION

EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER)

SAFETY CUSHION SAFETY CUSHION SAFETY CUSHION NOSING NOSING NOSING

ERANCE)

CLEAR CLEAR

PATENDED HONEYCOMB PATENDED HONEYCOMB EXTRUSIONS PROVIDED PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & PROVIDED HORIZONTAL EXTRUSIONS VERTICAL & HORIZONTAL STRENGTH VERTICAL & HORIZONTAL STRENGTH STRENGTH

"A" "A"

"A"

HEIGHT 4'-6" STD. 4'-6" STD.

CLEAR HEIGHT

"V" CAM

JAMB AIR SEAL

SECTION SECTION "AA" "AA" SECTION "AA"

HEIGHT 4'-6" STD.

ROLLER BEARING

STILE

STILE STILE

JAMB AIR SEAL JAMB AIR SEAL

INTERNAL CONSTRUCTION

BOTTOM BEARING

MOUNT ASSEMBLY MOUNT ASSEMBLY MOUNT ASSEMBLY

3/4"CAM FORRISE CAM RISE

TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL)

FOLLOWER

TM TM

TOUGH PLASTIC FACING

SAFETY CUSHION NOSING

NUMBER PAIRS: NUMBER OFOF PAIRS: WIDTH

CLEAR 3/4" FORWIDTH CLEAR WIDTH CLEAR CAM3/4" RISE FOR

CKNESS AF

TM

POLY-KOR

"A" "A" "A"

OPTIONAL BUMPERS OPTIONAL OPTIONAL BUMPERS

BUMPERS

DURABLE PLASTIC FACING DURABLE PLASTIC FACING

DURABLE PLASTIC FACING

CAM LIFT HARDWARE 90° X 90° (1 1/2" RISE IS STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ] DEEP SEAT CAM[ ]

ICATIONS]

CAM HARDWARE FACTORY ALIGNED AND PREPINNED. USE MOUNTING GUIDE FOR PROPER INSTALLATION WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED:

[ ] [ ] [ ] [ ]

7 1/2" x 10 1/2" [ ] 11 1/2" x 15 1/2" [ ]

16" x 18" [ ] 24" x 24" [ ]

"C" FRAME [USDA APPLICATIONS] - 1/4" SINGLE PANE 22" x 14" [ ] 22" x 20" [ ] 22" x 32" [ ] FOR PRESSURE AND WIND LOADS:

1/2" FLOOR 1/2"CLEARANCE FLOOR CLEARANCE ELEVATION OF DOORS 1/2" FLOOR ELEVATION OF DOORS CLEARANCE STANDARD FEATURES STANDARD FEATURES TO ELEVATION OF(+0",-1/8" DOORSTOLERANCE) - MANUFACTURED FIT OPENING - 14" X 16" STANDARD PANEL EACH TOLERANCE) LEAF - MANUFACTURED TO FIT VISION OPENING (+0",-1/8" FULL PERIMETER SEALS STANDARD FEATURES - 14" X 16" STANDARD VISION PANEL EACH LEAF - 3/4" RISE HARDWARE FULL PERIMETER SEALS - MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) - PERMANENT COLOR FACING - SPECIFY COLOR 3/4" RISE HARDWARE - 14"- X 16" STANDARD VISION PANEL EACH LEAF - BOTTOM CAM SHIELD/A.B.S. PLASTIC - PERMANENT COLOR - SPECIFY COLOR - FULL PERIMETER SEALSFACING - SAFETY CUSHION NOSINGPLASTIC - BOTTOM CAM SHIELD/A.B.S. - 3/4" RISE HARDWARE HOLD OPEN PIN - SAFETY CUSHION NOSING - 1 13/16" OVERALL DOOR THICKNESS - PERMANENT COLOR - HOLD OPEN PIN FACING - SPECIFY COLOR

- BOTTOM CAM SHIELD/A.B.S. PLASTIC - 1 13/16" OVERALL DOOR THICKNESS OPTIONAL EXTRAS: - SAFETY CUSHION NOSING BUMPERS - MOLDED POLYETHYLENE OPTIONAL - HOLD OPEN EXTRAS: PIN HEIGHT 12"[ ] 24"[ ] OTHER BUMPERS - MOLDED POLYETHYLENE - 1 13/16" OVERALL DOOR THICKNESS HEIGHT36"[ 12"[] 48"[ ] 24"[] ] OTHER

INTERNAL CONSTRUCTION INTERNAL CONSTRUCTION

INTERNAL CONSTRUCTION FOLLOWER FOLLOWER BOTTOM BEARING BOTTOM FOLLOWER BEARING

ROLLER BEARING ROLLER BEARING

BOTTOM BEARING

ROLLER BEARING

"V" CAM

"V" CAM .com

CAM LIFT HARDWARE 90° X 90° IS STANDARD) "V" CAM CAM(3/4" LIFT RISE HARDWARE 90° X 90° WHERE REQUIRED, ALTERNATE RISE CAM (3/4" SPECIFY RISE IS STANDARD) 1 1/2"[ ] DEEP SEAT CAM[ ] WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM

CAM LIFT HARDWARE 90° X 90°

CAM HARDWARE ALIGNED PREPINNED. 1 1/2"[ ]FACTORY DEEP SEAT CAM[ AND ] USE MOUNTING GUIDE FOR PROPER INSTALLATION (3/4" RISE IS STANDARD) CAM HARDWARE FACTORY ALIGNED AND PREPINNED. REQUIRED, SPECIFY ALTERNATE RISE CAM USE WHERE MOUNTING GUIDE FOR PROPER INSTALLATION


QUANTUM ROTO MOLDED DOOR QUANTUM ROTO DOOR ROTO MOLDED DOOR

NUMBER OF PAIRS:

3

4"

WIDTH CAM RISE

CLEAR 2" CLEARANCE

4"

SECTION A - A

CROSS LINKED PERIMETER PERIMETER HD POLYETHYLENE AIRSEALS SEALS AIR MOLDED DOOR BODY

NUMBER PAIRS: NUMBER OFOF PAIRS:

3

HIGH DENSITY POLYURETHANE FOAM CORE

PERIMETER AIR SEALS

WIDTH WIDTH 3 " CAM RISE 4 CAM RISE

CLEAR CLEAR 2" CLEARANCE 2" CLEARANCE

"A"

HIGH HIGH DENSITY DENSITY POLYURETHANE POLYURETHANE FOAM FOAM CORE CORE

INTERNAL BOX STEEL STILE

SECTION A - A SECTION

CROSSLINKED LINKED CROSS POLYETHYLENE HDHD POLYETHYLENE MOLDED DOORBODY BODY MOLDED DOOR

HIGH DENSITY POLYURETHANE FOAM CORE

"A"

INTERNAL INTERNALBOX BOX STEEL STEELSTILE STILE

THREADED STAINLESS STEEL SHAFT ASS'Y

CROSS LINKED HD POLYETHYLENE HIGH DENSITY HIGH DENSITY MOLDED DOOR BODY POLYURETHANE POLYURETHANE FOAM CORE FOAM CORE

CLEAR

CLEAR

"A" "A"

THREADED THREADED STAINLESS STAINLESS STEEL STEEL ASS'Y SHAFT SHAFT ASS'Y

CROSS LINKED CROSS LINKED HD POLYETHYLENE HD POLYETHYLENE MOLDED DOOR BODY MOLDED DOOR BODY

DOUBLE PANE POLYCARBONATE WINDOWS

INTERNAL BOX STEEL STILE

INTERNAL BOX INTERNAL STEEL STILEBOX STEEL STILE

DOUBLE PANE POLYCARBONATE DOUBLE PANE WINDOWS POLYCARBONATE WINDOWS

4' STD

HEIGHT 4' STD

HEIGHT

4' STD

HEIGHT

CLEAR

"A" "A"

INTERNAL CONSTRUCTION INTERNAL CONSTRUCTION INTERNAL CONSTRUCTION

1" FLOOR CLEARANCE

ELEVATION OF DOORS 1" FLOOR CLEARANCE 1" FLOOR ELEVATION OF DOORS

CLEARANCE STANDARD FEATURES

ELEVATION OF DOORS

STANDARD - PATENTED HELICALFEATURES CAM OPERATING HARDWARE STANDARD FEATURES - PATENTED HELICAL CAM OPERATING HARDWARE (CORROSION PROOF) (CORROSION PROOF) PATENTED HELICAL CAM OPERATING HARDWARE - STAINLESS STEEL MOUNTING HARDWARE - STAINLESSPROOF) STEEL MOUNTING HARDWARE (CORROSION - FULLY INSULATED, 1 3/4" THK DOOR BODY W/ 2W/1/4" STILE - FULLY INSULATED, 1 3/4" THK DOOR BODY 2 1/4" STILE - STAINLESS STEEL MOUNTING HARDWARE - 18" X -22" (14"THK X (14" 22" ON DOORS -VISION 18"INSULATED, X 22"PANELS VISION1PANELS X 22"BODY ON DOORS FULLY 3/4" DOOR W/ 2 1/4" STILE LESS THAN 30") LESS THAN 30") - 18" X 22" VISION PANELS (14" X 22" ON DOORS - USDA POLYETHYLENE DOOR BODY - USDA APPROVED POLYETHYLENE DOOR BODY LESS THANAPPROVED 30") - FULL PERIMETER AIR SEALS - USDA APPROVED POLYETHYLENE DOOR BODY - FULL PERIMETER AIR SEALS (HEADER, JAMB, NOSE, BOTTOM, AND HARDWARE SEALS) FULL PERIMETER AIR SEALS (HEADER,- JAMB, NOSE, BOTTOM, AND HARDWARE SEALS) TOP CAM SHIELD (HEADER, JAMB, NOSE, BOTTOM, AND HARDWARE SEALS) - TOP CAM - SHIELD 8 3/4" STAINLESS STEEL JAMB GUARD TOP CAM SHIELD - 8 3/4"- STAINLESS STEEL JAMB GUARD

- 8 3/4" STAINLESS STEEL JAMB GUARD OPTIONAL FEATURES

TEFLON HARD COATED

CAM FOLLOWER TEFLONALUM. HARD COATED ALUM. CAM FOLLOWER TEFLON HARD COATED ALUM. CAM FOLLOWER

.com

7

16

"Ø (6 PLCS.)

7 FOR ATTACHMENT 16 "Ø (6 PLCS.) FOR ATTACHMENT (2) HEADER (4) JAMB 7 "Ø (6 PLCS.) (2)16HEADER (4) JAMB FOR ATTACHMENT (2) HEADER (4) JAMB

STAINLESS STEEL STAINLESS STEEL HINGE BRACKET HINGE BRACKET STAINLESS STEEL HINGE BRACKET DOOR ADJUSTMENT DOOR ADJUSTMENT SET SCREW SET SCREW DOOR ADJUSTMENT SET SCREWHELICAL POLYMER CAM POLYMER HELICAL POLYMER HELICALCAM CAM


STANDARD MODEL HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE

SECTION "AA"

JAMB AIR SEAL

SAFETY CUSHION NOSING

POLY-KOR XHD MODEL POLY-KOR XHD MODEL

PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & HORIZONTAL STRENGTH

"A"

NEOPRENE IMPREGNATED INSULATION

NUMBER OFOF PAIRS: NUMBER PAIRS: TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL)

ALUMINUM TUBE FRAME

NOSE AIR SEAL

ALUMINUM TUBE FRAME

NOSE AIR SEAL

WIDTH WIDTH 1 1/2" 1 1/2"FOR FOR CAMRISE RISE CAM

ABS FACING ABS FACING OR GALVANIZED OR GALVANIZED

SAFETY SAFETY CUSHION CUSHION NOSING NOSING

CLEAR CLEAR

ALUMINUM MOUNT ALUMINUM MOUNT ASSEMBLY ASSEMBLY

FLEIBLE, POLYMER FOAM INSULATION

FLEIBLE, POLYMER FOAM INSULATION

EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER)

ALUMINUM TUBE FRAME

ALUMINUM STILE ALUMINUM JAMB AIR STILE SEAL

ALUMINUM TUBE FRAME

SECTION "AA"

JAMB AIR SEAL

SECTION "AA"

INTERNAL CONSTRUCTION "A"

INTERNAL CONSTRUCTION

"A"

"A"

INTERNAL CONSTRUCTION

"A"

SAFETY CUSHION NOSING SAFETY CUSHION

PATENTED HONEYCOMB EXTRUSIONS PROVIDE PATENTED HONEYCOMB VERTICAL & HORIZONTAL EXTRUSIONS PROVIDE STRENGTH

NOSING

VERTICAL & HORIZONTAL STRENGTH

"V" CAM

ERANCE)

CAM LIFT HARDWARE 90° X 90° (1 1/2" RISE IS STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ] DEEP SEAT CAM[ ]

ICATIONS]

CAM HARDWARE FACTORY ALIGNED AND PREPINNED. USE MOUNTING GUIDE FOR PROPER INSTALLATION WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED:

[ ] [ ] [ ] [ ]

7 1/2" x 10 1/2" [ ] 11 1/2" x 15 1/2" [ ]

16" x 18" [ ] 24" x 24" [ ]

"C" FRAME [USDA APPLICATIONS] - 1/4" SINGLE PANE 22" x 14" [ ] 22" x 20" [ ] 22" x 32" [ ] FOR PRESSURE AND WIND LOADS:

CLEAR

CLEAR

FULL PERIMETER RIVETS

FLEIBLE, POLYMER FOAM INSULATION

FLEIBLE, POLYMER FOAM INSULATION

ABS FACING OR GALVANIZED

ABS FACING OR GALVANIZED

3'-10" STD.

ROLLER BEARING

HEIGHT

CKNESS AF

3'-10" STD.

BOTTOM BEARING

HEIGHT

FOLLOWER

FULL PERIMETER RIVETS

INTERNAL WELDED ALUMINUM TUBE FRAME

INTERNAL WELDED ALUMINUM TUBE FRAME

1/2" FLOOR CLEARANCE ELEVATION OF DOORS

1/2" FLOOR STANDARD FEATURES CLEARANCE - FULLY INSULATED, 1 13/16" OVERALL DOOR THICKNESS ELEVATION OF DOORS

- 24" FULL WIDTH VISION PANEL EACH LEAF STANDARD FEATURES - FULL PERIMETER SEALS - 42"INSULATED, CCR RUBBER 1 BUMPERS (POLYETHYLENE USDA) - FULLY 13/16" OVERALL DOORFOR THICKNESS BOTTOMVISION CAM SHIELD/A.B.S. - 24"- TOP FULL& WIDTH PANEL EACHPLASTIC LEAF SAFETY CUSHION NOSING - FULL PERIMETER SEALS - INTERNAL ALUMINUM FRAMEWORK - 42" CCR RUBBER BUMPERS (POLYETHYLENE FOR USDA) - FULL PERIMETER RIVETS - TOP BOTTOM CAMHARDWARE SHIELD/A.B.S. PLASTIC - 1&1/2" RISE V-CAM - SAFETY - HOLDCUSHION OPEN PINNOSING - INTERNAL ALUMINUM - C649 JAMB GUARD FRAMEWORK - MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) - FULL PERIMETER RIVETS

- 1 1/2" RISE V-CAM HARDWARE OPTIONAL EXTRAS: - HOLD OPEN PIN - C649 JAMB GUARD BUMPERS - MOLDED POLYETHYLENE [USDA APPLICATIONS]

MOUNTING HARDWARE FOLLOWER

MOUNTING HARDWARE

BOTTOM BEARING

FOLLOWER

ROLLER BEARING

BOTTOM BEARING

ROLLER BEARING

.com

"V" CAM

CAM LIFT HARDWARE 90° X 90° (1 1/2" RISE IS STANDARD) "V" CAM WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ]CAM DEEPLIFT SEAT CAM[ ] HARDWARE 90° X 90°

CAM HARDWARE FACTORY ALIGNED AND PREPINNED. (1 1/2" RISE IS STANDARD) USE MOUNTING GUIDE FOR PROPER INSTALLATION


STANDARD MODEL HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE

SECTION "AA"

JAMB AIR SEAL

SAFETY CUSHION NOSING PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & HORIZONTAL STRENGTH

"A"

NEOPRENE IMPREGNATED INSULATION

STANDARD MODEL STANDARD MODEL STANDARD MODEL

TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL) EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER)

NUMBER OF PAIRS:

NUMBER OF PAIRS:

INTERNAL CONSTRUCTION

SAFETY NOSING CUSHION NOSING

HEAVY DUTY VINYL OR RUBBER FACING

NEOPRENE IMPREGNATED INSULATION SECTION

SECTION "AA"

PATENDED HONEYCOMB PATENDED HONEYCOMB SAFETY CUSHION EXTRUSIONS PROVIDED EXTRUSIONS PROVIDED NOSING VERTICAL & HORIZONTAL VERTICAL & HORIZONTAL STRENGTH STRENGTH

16" x 18" [ ] 24" x 24" [ ]

CLEAR

CLEAR

HEIGHT

"A"

"A""A"

"A"

PATENDED HONEYCOMB EXTRUSIONS PROVIDED NEOPRENE NEOPRENE VERTICAL & HORIZONTAL IMPREGNATED IMPREGNATED STRENGTH INSULATION INSULATION NEOPRENE IMPREGNATED INSULATION

TOUGH, FLEXIBLE VINYL TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED FACINGS (ROTOCURED RUBBER FACINGS RUBBER FACINGS OPTIONAL)

4'-6" STD.

HEIGHT

"A"

4'-6" STD.

CLEAR HEIGHT

WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED:

4'-6" STD.

CAM HARDWARE FACTORY ALIGNED AND PREPINNED. USE MOUNTING GUIDE FOR PROPER INSTALLATION

[ ] [ ]

STILE

JAMB AIR SEAL

SAFETY CUSHION

(1 1/2" RISE IS STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ] DEEP SEAT CAM[ ]

[ ]

STILE JAMB AIR SEAL

JAMB AIR SEAL

SAFETY CUSHION NOSING NOSING

CAM LIFT HARDWARE 90° X 90°

[ ] [ ]

STILE

"AA"

SECTION "AA"

"V" CAM

7 1/2" x 10 1/2" [ ] 11 1/2" x 15 1/2" [ ]

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION

ROLLER BEARING

ICATIONS]

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION

BOTTOM BEARING

ERANCE)

MOUNT ASSEMBLY

HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

FOLLOWER

CKNESS AF

HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION

WIDTH CLEAR CLEAR 1 1/2"WIDTH FOR CAM 1 1/2"RISE FOR WIDTH CAM RISECLEAR 1 1/2" FOR CAM RISE

NUMBER OF PAIRS:

OPTIONAL) TOUGH, FLEXIBLE VINYL EXCLUSIVE STRUCTURAL FACINGS EXCLUSIVE RUBBER "(ROTOCURED I " BEAM STRUCTURAL RUBBER FACINGS RUBBER " I " BEAM REINFORCING OPTIONAL) REINFORCING (8" ON CENTER) (8" ON CENTER)

EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING

INTERNAL CONSTRUCTION(8" ON CENTER)

INTERNAL CONSTRUCTION

1/2" FLOOR

1/2" FLOOR CLEARANCE "C" FRAME [USDA APPLICATIONS] - 1/4" SINGLE PANE CLEARANCE ELEVATION OF DOORS 22" x 14" [ ] 22" x 20" [ ] ELEVATION OF DOORS STANDARD FEATURES 1/2" FLOOR 22" x 32" [ ] STANDARD FEATURES CLEARANCE - FULLY INSULATED, 1 13/16" OVERALL DOOR THICKNESS - 14" XINSULATED, 16" RECTANGULAR VISION PANELDOOR EACHTHICKNESS LEAF - FULLY 1 13/16" OVERALL ELEVATION OF DOORS FOR PRESSURE AND WIND LOADS: - FULL PERIMETER SEALS VISION PANEL EACH LEAF - 14" X 16" RECTANGULAR STANDARD FEATURES - 48" WRAP AROUND WEAR PANELS [ ] ADJUSTABLE SPRING COMPENSATOR - FULL PERIMETER SEALS - TOP & BOTTOM CAM SHIELD/A.B.S. PLASTIC - FULLY -INSULATED, 1 13/16" OVERALL DOOR THICKNESS 48" WRAP AROUND WEAR PANELS [ ] COMPRESSION SPRING - SAFETY CUSHION NOSING - 14" X 16" RECTANGULAR VISION PANEL EACH LEAF - TOP & BOTTOM CAM SHIELD/A.B.S. PLASTIC - MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) - FULL PERIMETER SEALS NOSING - SAFETY CUSHION 1 1/2" RISE V-CAM HARDWARE - 48" WRAP AROUND WEARTO PANELS - MANUFACTURED FIT OPENING (+0",-1/8" TOLERANCE) - HOLD OPEN PIN - TOP & -BOTTOM CAM SHIELD/A.B.S. PLASTIC 1 1/2" RISE V-CAM HARDWARE - SAFETY CUSHION NOSING - OPTIONAL HOLD OPEN PIN EXTRAS: - MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) BUMPERS - MOLDED POLYETHYLENE [USDA APPLICATIONS] - 1 1/2"OPTIONAL RISE V-CAMEXTRAS: HARDWARE

FOLLOWER INTERNAL CONSTRUCTION FOLLOWER BOTTOM BEARING BOTTOM BEARING ROLLER FOLLOWER BEARING ROLLER BOTTOM BEARING BEARING

ROLLER BEARING

.com "V" CAM

"V" CAM CAM LIFT HARDWARE 90° X 90°

(1 CAM 1/2" RISE IS STANDARD)90° X 90° LIFT "V"HARDWARE CAM WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM (1 1/2" RISE IS STANDARD) 3/4"[ ] DEEP SEAT CAM[ ] WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM

CAM LIFT HARDWARE 90° X 90°


STANDARD MODEL HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE

SECTION "AA"

JAMB AIR SEAL

SAFETY CUSHION NOSING PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & HORIZONTAL STRENGTH

"A"

NEOPRENE IMPREGNATED INSULATION

STANDARD XHD MODEL STANDARD XHD MODEL STANDARD XHD MODEL

TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL)

NUMBER OF PAIRS:

EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER)

WIDTH NUMBER OF PAIRS:1 1/2" FOR NUMBER OF PAIRS: CAM RISE WIDTH 1 1/2" FOR WIDTH CAM RISE 1 1/2" FOR CAM RISE

INTERNAL CONSTRUCTION

SAFETY CUSHION NOSING

CLEAR

CLEAR

STEEL MOUNT ASSEMBLY

NOSE AIR SEAL HEAVY DUTY VINYL NOSE AIR SEAL OR RUBBER FACING HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING SAFETY CUSHION NOSING

CLEAR

NOSE AIR SEAL HEAVY DUTY VINYL OR RUBBER FACING

STEEL MOUNT ASSEMBLY STEEL MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE NEOPRENE IMPREGNATED INSULATION

SECTION "AA"

SECTION "AA"

FOLLOWER

INTERNAL CONSTRUCTION

CAM LIFT HARDWARE 90° X 90° (1 1/2" RISE IS STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ] DEEP SEAT CAM[ ] CAM HARDWARE FACTORY ALIGNED AND PREPINNED. USE MOUNTING GUIDE FOR PROPER INSTALLATION

HEIGHT CLEAR HEIGHT CLEAR CLEAR 4'-6" STD. HEIGHT 4'-6" STD.STD. 4'-6"

"V" CAM

ATIONS]

"A" "A" "A"

[ ] [ ] [ ]

7 1/2" x 10 1/2" [ ] 11 1/2" x 15 1/2" [ ]

NOSING EXTRUSIONS PROVIDE SAFETY CUSHION VERTICAL NOSING & HORIZONTAL PATENTED HONEYCOMB STRENGTH EXTRUSIONS PROVIDE VERTICAL & HORIZONTAL NEOPRENE PATENTED HONEYCOMB IMPREGNATED STRENGTH EXTRUSIONS PROVIDE INSULATION & HORIZONTAL RESILIENT INTERNAL VERTICAL NEOPRENE STRENGTH BACK STRIP IMPREGNATED INSULATION RESILIENT INTERNAL FLEXIBLE EXTERNAL NEOPRENE IMPREGNATED BACK STRIP BACK STRIP INSULATION RESILIENT INTERNAL FLEXIBLE EXTERNAL BACK STRIP BACK STRIP

16" x 18" [ ] 24" x 24" [ ]

"C" FRAME [USDA APPLICATIONS] - 1/4" SINGLE PANE 22" x 14" [ ] 22" x 20" [ ] 22" x 32" [ ] FOR PRESSURE AND WIND LOADS: [ ] ADJUSTABLE SPRING COMPENSATOR [ ] COMPRESSION SPRING

"A" "A" "A"

FLEXIBLE EXTERNAL BACK STRIP

TOUGH, FLEXIBLE VINYL FACINGS

(ROTOCURED RUBBER TOUGH, FLEXIBLE FACINGS OPTIONAL) VINYL FACINGS (ROTOCURED TOUGH, FLEXIBLERUBBER FACINGS OPTIONAL) VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL) EXCLUSIVE STRUCTURAL RUBBER " I " BEAM EXCLUSIVE REINFORCING STRUCTURAL RUBBER " I "(8" BEAM ON CENTER) STEEL MOUNTING REINFORCING EXCLUSIVE STRUCTURAL

WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED:

[ ] [ ]

SAFETY CUSHION

INTERNAL CONSTRUCTION

ROLLER BEARING

ANCE)

STILE JAMB AIR SEAL

NOSING JAMB AIR SEAL SECTION "AA" SAFETY CUSHION INTERNAL CONSTRUCTION PATENTED HONEYCOMB

BOTTOM BEARING

NESS

JAMB AIR SEAL

STILE

NEOPRENE IMPREGNATED INSULATION

STEEL MOUNTING STEEL MOUNTING

1/2" FLOOR

1/2" FLOOR CLEARANCE CLEARANCE 1/2" FLOOR ELEVATION OF DOORS ELEVATION OF DOORS CLEARANCE

STANDARD FEATURES (XHD FEATURES IN BOLD FACE)

ELEVATION OF DOORS STANDARD FEATURES (XHD FEATURES IN BOLD FACE)

- FULLY INSULATED, 1 13/16" OVERALL DOOR THICKNESS

- FULLY INSULATED, 13/16" OVERALL STANDARD FEATURES 1(XHD FEATURES INDOOR BOLD THICKNESS FACE) - 14" X16" 16"RECTANGULAR RECTANGULAR VISION PANEL EACH LEAF - 14" XINSULATED, VISION PANEL EACH LEAF - FULLY 1 13/16" - FULL FULLPERIMETER PERIMETER SEALS OVERALL DOOR THICKNESS SEALS - 14" X 16" RECTANGULAR VISION PANEL EACH LEAF TOP BOTTOM CAMSHIELD/A.B.S. SHIELD/A.B.S. PLASTIC --TOP &&BOTTOM CAM PLASTIC - FULL PERIMETER SEALS SAFETY CUSHION NOSING -- SAFETY CUSHION - TOP & BOTTOM CAMNOSING SHIELD/A.B.S. PLASTIC 1/2"CUSHION RISEV-CAM V-CAM HARDWARE -- 111/2" RISE HARDWARE - SAFETY NOSING - HOLD HOLDOPEN OPENPIN PIN - 1- 1/2" RISE V-CAM HARDWARE 48" FLEX SHIELD - 48" FLEX - HOLD OPENSHIELD PIN INTERNAL ANDEXTERNAL EXTERNAL REINFORCING BACK STRIPS -- INTERNAL AND REINFORCING BACK STRIPS - 48" FLEX SHIELD STEELMOUNT MOUNT ASSEMBLY -- STEEL ASSEMBLY - INTERNAL AND EXTERNAL REINFORCING BACK STRIPS MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) MANUFACTURED TO FIT OPENING (+0",-1/8" TOLERANCE) - STEEL MOUNT ASSEMBLY

(8" ON RUBBER " ICENTER) " BEAM REINFORCING (8" ON CENTER)

MOUNTING HARDWARE

MOUNTING HARDWARE

MOUNTINGFOLLOWER HARDWARE FOLLOWER BOTTOM BOTTOM FOLLOWER BEARING BEARING BOTTOM ROLLER BEARING ROLLER BEARING BEARING ROLLER BEARING

.com

"V" CAM "V" CAM "V" CAM CAMHARDWARE LIFT HARDWARE 90° X 90° CAM LIFT 90° X 90°

1/2"ISRISE IS CAM(1LIFT HARDWARE 90°STANDARD) X 90° 1/2"(1 RISE STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM WHERE ALTERNATE RISE CAM (1REQUIRED, 1/2" RISE ISSPECIFY STANDARD) 3/4"[ 3/4"[ ]SPECIFY DEEP CAM[ WHERE REQUIRED, ALTERNATE RISE CAM ] SEAT DEEP SEAT ]CAM[ ]


STANDARD MODEL HEAVY DUTY VINYL OR RUBBER FACING

SAFETY CUSHION NOSING

MOUNT ASSEMBLY

NEOPRENE IMPREGNATED INSULATION STILE

SECTION "AA"

JAMB AIR SEAL

SAFETY CUSHION NOSING PATENDED HONEYCOMB EXTRUSIONS PROVIDED VERTICAL & HORIZONTAL STRENGTH

"A"

NEOPRENE IMPREGNATED INSULATION

TOUGH, FLEXIBLE VINYL FACINGS (ROTOCURED RUBBER FACINGS OPTIONAL) EXCLUSIVE STRUCTURAL RUBBER " I " BEAM REINFORCING (8" ON CENTER)

INTERNAL CONSTRUCTION

FOLLOWER BOTTOM BEARING

CKNESS AF

ROLLER BEARING

"V" CAM

ERANCE)

CAM LIFT HARDWARE 90째 X 90째 (1 1/2" RISE IS STANDARD) WHERE REQUIRED, SPECIFY ALTERNATE RISE CAM 3/4"[ ] DEEP SEAT CAM[ ]

ICATIONS]

CAM HARDWARE FACTORY ALIGNED AND PREPINNED. USE MOUNTING GUIDE FOR PROPER INSTALLATION WINDOWS (DOUBLE-GLAZED): POLYCARBONATE - 1/8" THICK, FLUSH MOUNTED:

[ ] [ ] [ ] [ ] [ ]

7 1/2" x 10 1/2" [ ] 11 1/2" x 15 1/2" [ ]

16" x 18" [ ] 24" x 24" [ ]

"C" FRAME [USDA APPLICATIONS] - 1/4" SINGLE PANE 22" x 14" [ ] 22" x 20" [ ] 22" x 32" [ ] FOR PRESSURE AND WIND LOADS: [ ] ADJUSTABLE SPRING COMPENSATOR [ ] COMPRESSION SPRING

.com


Air Curtain

.com


Aleco Impact Door Catalog  

Traffic doors that really take an impact!

Read more
Read more
Similar to
Popular now
Just for you