Spring
f
Strong Link Assembly
clean ride
SM055
chain/spring connector
Self-Cleaning Chain Lube, 8 oz. Outlasts conventional chain lube. Chain stays clean and repels sweat, dust and dirt.
3@
LA027, $11.74
SM068
NGS Strong Link Chain lasts four times longer than the factory’s chain and bearing!
2% SM008.1, w/ Bearing 2^ SM008.2, w/ Bushing
Side Cover Replacement Kit
Pedal Arm retrofit kit
Includes:
1*
SM006.1
StairMaster now carries pedals which require upgraded level arms.
g h
Step Chain
2$
SMA010.1, Right SMA010.2, Left
2!
1&
SM006
1#
SM005
Choose a Fastener System:
Pedal Bushings
Quarter-Turn Fastener 1% SM005.2, Right Panel 1( SM006.2, Left Panel
The original style of pedal is discontinued, but the replacement bushings are still available.
i j
SM010
SM008
SM051.1, Old Style SM4401.1, New Style
i
j
stairmaster
1 Reinforced right side cover 1 Reinforced left side cover 3 Stainless steel stud assemblies
Master Link 3! SM056
Snap Fastener 1^ SM005.3, Right Panel 2) SM006.3, Left Panel
LEVEL ARM
MASTER LINKS and Bearings New Style Master Link 2( SM053.1
Old Style Master Link 2* SM053
For New Style Pedals 3$ SM4401 Hardware Only 3% SM4490
Pedal Arm Bearing 3# SM050
Plastic Gray Bushing 2& SM050.1
Stainless Steel Sleeve 3) SM054
Original style level arm is no longer available. Purchase Pedal Arm Retrofit Kit: SMA010.1, Right; SMA010.2, Left
StairMaster 4000 PT Chains, Master Links and Bearings Drive Chain with Master Link 2@ SM003 2# SM004 Master Link for Drive Chains Step Chain 2$ SM008 Strong Link Assembly, Pair, w/ Bearing 2% SM008.1 Strong Link Assembly, Pair, w/ Bushing 2^ SM008.2 2& SM050.1 Gray Bushing, Plastic, New Style 2* SM053 Master Link, Double Pitch, Old Style 2( SM053.1 Master Link, New Style Sleeve, Stainless Steel, Old Style 3) SM054 3! SM056 Master Link, Single Pitch 3@ SM068 Chain/Spring Connector Bearing, 1/4", Pedal Arm, Old Style 3# SM050
$ 3.95
How to Remove and Replace the Step Chain
1.29 4.99 22.00
1. Remove the bottom cover.
25.00 2.32
2. Remove the step chain retainers.
1.29
3. Support the pedal arm. Unhook the pedal arm return spring from the spring hanger. Lift the step chain up and off the clutch sprocket and lower the pedal arm to the floor.
4.50 1.95 1.29
4. Remove the double-pitch master link (PN 21298SV) and bearing sleeve assembly from the step chain connection point on the pedal arm.
1.60 2.50
Level Arm
3$ 3%
SM4401
Level Arm w/ Hardware, New Style Pedal
SM4490
Hardware only, New Style Pedal
5. Remove the master link from the spring-chain connection.
17.00
6. Reverse the procedures to reinstall the step chain. Lubricate the step chain before reinstalling the covers.
1.29
Technical Manual
MANSM4000 Technical Manual, StairMaster 4400PT
20.00
more parts for this model on the next page
8 www.gympart.com ( 1-800-GYMPART (1-800-496-7278)
g
45