Page 1

WATERSLIDE DECALS


Waterslide Decals

What is a Waterslide Decal Decalcomania is a decorative technique based on the realization of a graphic artwork that can be transferred onto 3D surfaces. Decals are an excellent solution for decorating items which are not suitable for the direct printing, due to their shape and features.

2


Waterslide Decals

Where to use Waterslide Decals helmets bike frames sports equipment motorcYCle fairings and tanks CARBON PARTS Waterslide decals must be applied on pre-coated substrates. Decals can be used for the decoration of any object made in plastic, metal, wood or carbon fiber.

3


Waterslide Decals

Why use Waterslide Decals

To decorate curved surfaces and complex shapes, fitting the needs of any industrial designs and aerodynamical features

To realize elaborated graphic artworks, with several colours, including metallic and fluorescent effects. Any request can be fulfilled in terms of communication, customization and graphics.

To achieve top-quality results. Due to their very low thickness (25-30 µm), decals can perfectly blend with the object and the final over-varnishing allows to obtain high mechanical and weathering resistances. There is no comparison with traditional stickers, that have about 100 µm thickness and tend to unstick over time.

4


Waterslide Decals

How Decals are made 3. Peelable coating

Peelable coating

Transparent ink

Coloured ink

Collodio is a special wrap that allows to transfer the decals from the paper to the final object. Collodio can be screen printed with high thickness.

2. Inks Texylon 58.000 and Texylon 59.000 series are our market-leader inks for manufacturing water slide decals. It is possible to choose between 58.000 matt and 59.000 glossy finishing. The most common printing sequence is to apply one or more background white layers, followed by colours and a final transparent ink.

White ink

1. Printing substrate Printing substrate

Special paper, with a specific water-soluble coating that allows to remove the graphic artwork by means of a simple water immersion. 5


Waterslide Decals

How decals are made

1. Printing substrate: special paper The special paper for decals is treated with a water-soluble coating on the print side. The water-soluble coating allows to remove the graphic artwork with a simple water immersion.

The special paper is non-absorbent and it helps to maintain a good register among the printing layers.

6


Waterslide Decals

How decals are made

2. Inks: white In the most common graphic artworks, one or more layers of background white are applied first. The white background avoids that the colour of the substrate affects the colour rendering of the decals.

It is possible to choose among two dedicated products:

TEXYLON OPAQUE WHITE SP (code A31258107SP)

TEXYLON WHITE HS (code A31258108)

Excellent results in the production of waterslide decals due to high opacity and flexibility.

“High Speed” white, suitable for cylinder machines and high printing speed. Excellent printability without compromising opacity and flexibility. It is the perfect choice for high print runs and industrial productions.

Suitable for semi-automatic printing machines.

The drying process is fundamental to obtain a perfect result. It must be run in well aired Wicket oven, or at room conditions in a well aired environment. It takes 3 – 4 hours at 25 – 30°C and 60% RH to reach a complete solvent evaporation.

7


Waterslide Decals

How decals are made

2. Inks: colours

The colour range includes all the products of the Texylon 58.000 and 59.000 series: • 58.000 Amc Matt Bases

mixing bases

• 59.000 Colormatic Gloss Bases • 58.000 Opaque Colours, with sixteen colour shades • 58.000 Process Colours • Metallic and Fluorescent Pigments, 96.000 Series

8


Waterslide Decals

How decals are made

2. Inks: colours The printing sequence has to be set according to the graphical needs. It is possible to realize even the most complex graphic artworks. Metallic and fluorescent pigments of the 96.000 series must be mixed with A31159850 – Bronze Binder in a maximum percentage of 30%. It is suggested to add also A31258911 – Flex Additive 58.911 up to 5%. With the process colours it is possible to use A31158880 – Thixotropic Gel Toys, which allows to reduce the shade strength without modifying the typical rheological behaviour of the process colours. It is possible to mix the 59.000 glossy mixing bases with A31258840 – Texylon 58.840 Cutting Paste to obtain semi-matt finishing and a faster drying. It is mandatory to wait until the complete drying of a colour before proceeding to the next one.

9


Waterslide Decals

How decals are made

2. Inks: transparent For the best final result, it is mandatory to print a transparent ink. It has the function to protect the underlying layers and to allow the peeling of the upper coating.

It is possible to choose between two different products:

TEXYLON 59.800 TRANSPARENT BASE (code A31159800)

TEXYLON OVERPRINT SOLAR SHIELD (code A31259045)

Standard transparent of the Texylon range. It is flexible, elastic and suitable for all applications.

Transparent with high light fastness. It is perfect when outdoor resistance is requested.

It is suggested to print the final transparent layer 2-3 mm wider than the layers below. Always check the drying of the transparent before printing the peeling coating.

10


Waterslide Decals

How decals are made

Thinners According to the printing needs, it is possible to choose among a wide range of thinners to achieve the optimal printability: • A31890904

FAST THINNER: the perfect choice to print full-field and when quick drying is required

• A31890918

SLOW THINNER: the perfect choice to print fine details or when working in warm conditions

11


Waterslide Decals

How decals are made

3. Peelable coating: Collodio Collodio is the product that allows to easily transfer and apply the decal. Collodio can be screen-printed by covering completely the graphic artwork. It is possible to choose between two different products, depending on technical features and application processes: PEELABLE COLLODIO C (code A31295867)

FIX COLLODIO (code A31195869)

To be removed before the final spray painting of the object.

The Fix Collodio is not removed before the final

It allows to obtain decals with minimal thickness, reaching

spray painting. The use of Fix Collodio allows to

a perfect integration with the decorated substrates. It is the

avoid one application step, and it could be the

best choice for fine artworks and high-quality production.

best choice for cost-saving or for some special

Peelable Collodio C can be screen-printed with 15 -32

substrates.

threads/cm screen, one or two applications, according to the desired thickness. Collodio must be printed full-field, with an edge of 5-10 mm wider than that of the Texylon transparent. The drying of Collodio is one of the most crucial steps of the process. Standard drying conditions are 24 hours at 2530°C and with RH not exceeding the 60%. The full drying of the Collodio is fundamental to reach an optimal peeling.

12


Waterslide Decals

Application of the Waterslide Decals The application of waterslide decals is a very demanding process, requiring manual skills and precision. Decals must be applied on pre-coated substrates.

CUT

SOAK

STICK

DRY

REMOVE

the paper around the graphic artwork, leaving 2-3 mm edge

the decals with lukewarm water for 1-2 minutes to remove the paper support

the decals on the item and spread them out with the help of a spatula

the item in a ventilated oven at 60°C for at least 1 hour

the peelable coating

For the final spray-painting of the item it is possible to use solvent-base or UV varnishes.

13


Waterslide Decals

Storage PACKAGING For a good storage of the decals it is suggested to seal them using a polyethylene film. STORAGE TEMPERATURE and RH Printed decal sheets are very fragile and could decay over time due to the thermo-hygrometric variations. It is suggested to store the decals at a temperature of 20 – 25°C with a RH% not exceeding 60%. The decay changes the properties of the decals or some of their components, leading to application failures. Decay processes may affect the paper and the Collodio too. Decals printed with Texylon products, according to the technical guidelines will maintain a good applicability up to six months after the print itself.

14


Waterslide Decals

Product range

TEXYLON 58.000

TEXYLON 59.000 GLOSS

THINNERS

COLLODIO

15


a Business Brand by

w w w. e p t a n o v a . c o m

Headquarters EPTAINKS S.P.A. Via A. De Gasperi, 1 22070 Luisago (CO), Italy P. +39 031 9090111 Fax +39 031 920505 info@eptainks.com

Market Companies EPTAINKS S.P.A. Via Zamenhof, 12 – 36100 Vicenza, Italy P +39 0444 914382 Fax +39 0444 918196

EPTA CHINA Chemicals Shanghai Co. Ltd. Building A12, No.5399, Waiqingsong Road Qingpu I.Z. – 201707 Shanghai, China P +86 21 69211223 – Fax +86 21 69211311

EPTA SPAIN S.L.U. Can Coll, 15 – naves 22-23 08185 Lliçá de Vall – Barcelona, Spain P +34 93 8439415 Fax +34 93 8439127

EPTA BANGLADESH Ltd. Plot-45, Gulshan South Avenue, Navana Tower Shop No. 2567 (3rd Floor) Dhaka PO 1212, Bangladesh P +880 44 78440077 80 | info@eptabd.com

EPTA FRANCIA SAS 42210 - Montrond-les-Bains 71 Rue De Boissieu P +33 04 77 61 97 54 serviceclients@eptafrancia.fr

EPTA INDIA (PVT) Ltd. No.8, 5th street, Pudhu Thottam, Sheriff Colony Tiruppur – 641 604, India P +91 421 2216988 – Fax +91 421 2213225 info@eptainks.co.in

ESAPRINT LLC (OOO) Ostashkovskaya Street 22 127224 Moscow, Russian Federation P +7 495 3800278 F +7 495 6086810 info@esaprint.ru

EPTA NORDIC OY Palloilijantie 17 90670 Oulu, Finland P +358 442377532 info@eptanordic.com

EPTALAM INDÚSTRIA, COMÉRCIO, IMPORTAÇÃO E EXPORTAÇÃO DE TINTAS LTDA. Avenida New Jersey, 1030 – Galpão 01 Aruja – SP, CEP 07400-000 P +55 114652 7831 info@eptalam.com.br

EPTA NORTH AMERICA 3323 South Malt Avenue Commerce, CA 90040 USA P +1 (323) 7211400 F +1 (323) 7242105 info@eptanorthamerica.com