R <24V-35A>
A
• Removal sequence
<Type A>
1 2 3 4 5
Adjust bolt Adjust shaft <Type B> V beit Alternator assembly CD P.54-48 Adjust plate
* : Alternator bracket WARNING&-------
Before removing the alternator 4, be sure to disconnect the negative 0 terminal of the battery and insulate it with a tape or something else. If the negative termi nal is not disconnected, the battery volt age is always available at terminal B and is dangerous.
e
®16745
<Type B>
A 1 ......... ;11"11,11 ........ :-- ---· ·---- - 11 h;;HQIIQUVI I ,:n;;\.tUCI l\,C
Reverse the order of removal. • Adjustment after installation Adjust the tension of the V-belt 3. CD Gr 14
1
3
®46895
Service standards Location 4
Maintenance item Alternator output current (* When hot, when 27V is generated)
Alternator speed
Regulator regulated voltage (5000 rpm, loads SA or less)
Standard value 1500 rpm
20A or more
2500 rpm
29A or more
5000 rpm
33A or more 28.5 ± 0.5V
Limit
-
-
Remedy Check
Replace
*: "When hot" refers to the state of the engine after 30 minutes of maximum output operation at 5000 rpm at a normal ambient temperature.
54-46