SK-919TD1S-PQ SK-939TS1SQ

315MHz, Factory pre-coded

SK-917T2AQ

315MHz, CODEBUMP™ Codehopping technology

433.92MHz, Factory pre-coded

SK-919TD2A-PQ SK-939TS2A-PQ

315MHz, Factory pre-coded

• 1 Button, 1 channel • Over 68 billion possible codes • LED Transmission indicator 315MHz, CODEBUMP™ SK-917T1-GBQ Codehopping technology

SK-919T1-GBQ SK-937T1-GBQ

315MHz, Factory pre-coded 433.92MHz, CODEBUMP™ Codehopping technology

SK-939T1-GBQ

433.92MHz, Factory pre-coded

• 1 Button, 1 channel • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator • Patent pending

SK-919TP1H-BQ SK-939TP1H-BQ

Patented

315MHz, Factory pre-coded 433.92MHz, Factory pre-coded

433.92MHz, Factory pre-coded

SK-919TP3JQ

315MHz, Factory pre-coded

• 3 Buttons, 7 channels • Over 68 billion possible codes • LED Transmission indicator 315MHz, CODEBUMP™ SK-917T3-GNQ Codehopping technology

SK-919T3-GNQ SK-937T3-GNQ SK-939T3-GNQ

433.92MHz, Factory pre-coded

• 3 Buttons, 7 channels • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator • Patent pending

Belt-clip holster for slimline handheld transmitters, patented

Patented

SK-915BA 12VDC Battery

X-930-089

3VDC Lithium battery, CR2016

X-930-096

3VDC Lithium battery, CR2032

2

info@superior-elec.com

SK-937T2-GNQ

315MHz, Factory pre-coded 433.92MHz, CODEBUMP™ Codehopping technology

SK-939T2-GNQ

433.92MHz, Factory pre-coded Patented

315MHz, Factory pre-coded 433.92MHz, Factory pre-coded

SK-917TP4J-NQ

315MHz, CODEBUMP™ Codehopping technology

SK-919TP4J-NQ SK-939TP4J-NQ

315MHz, Factory pre-coded 433.92MHz, Factory pre-coded

• 4 Buttons, 15 channels • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator

315MHz, Factory pre-coded 433.92MHz, CODEBUMP™ Codehopping technology

SK-9HBC

SK-919T2-GNQ

Patented

• 2 Buttons, 3-Ch • Over 68 billion possible codes • LED Transmission indicator • Extreme durability – rubber buttons eliminate damage caused by electrostatic discharge • Gold-plated battery clips and contact points extend the life of the transmitter • Slimline design: 31/2”x23/16”x1/2” (89x56x13 mm) • Includes visor and wall mount clip

• 1 Button, 1 channel • Over 68 billion possible codes • Adds wireless functionality to wired devices such as RTE plates • LED Transmission indicator • External or internal battery power

SK-917TP3J-RQ

315MHz, CODEBUMP™ Codehopping technology

SK-919TP2H-NQ SK-939TP2H-NQ

315MHz, Factory pre-coded

315MHz, CODEBUMP™ Codehopping technology

SK-917T2-GNQ

• 2 Buttons, 3 channels • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator • Patent pending

• 1 Button, 1 channel • Over 68 billion possible codes • LED Transmission indicator • Extreme durability – rubber button eliminates damage caused by electrostatic discharge • Slimline design: 31/2”x23/16”x1/2” (89x56x13 mm) • Includes visor and wall mount clip

SK-919TDWS-B SK-939TDWS-BQ

433.92MHz, Factory pre-coded

• 2 Buttons, 3 channels • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator

Tel: 886-2-2378-6161

SK-917T4-GNQ

315MHz, CODEBUMP™ Codehopping technology

SK-919T4-GNQ SK-937T4-GNQ

315MHz, Factory pre-coded 433.92MHz, CODEBUMP™ Codehopping technology

SK-939T4-GNQ

433.92MHz, Factory pre-coded

• 4 Buttons, 15 channels • Over 68 billion possible codes (CODEBUMP™ version has over 18 quintillion codes) • LED Transmission indicator • Patent pending

SK-919TP4H-NQ SK-939TP4H-NQ

Patented

315MHz, Factory pre-coded 433.92MHz, Factory pre-coded

• 4 Buttons, 15-Ch • Over 68 billion possible codes • LED Transmission indicator • Extreme durability – rubber buttons eliminate damage caused by electrostatic discharge • Gold-plated battery clips and contact points extend the life of the transmitter • Slimline design: 31/2”x23/16”x1/2” (89x56x13 mm) • Includes visor and wall mount clip

Fax: 886-2-2378-6163

www.enforcer.com.tw

Standard Receivers 315MHz, 11~24 VAC/VDC, 10A@24VDC relay 433.92MHz, 11~24 VAC/VDC, 10A@24VDC relay

SK-910RBQ SK-910R-4Q

E-37EV

Standard Receivers SK-910RB2Q SK-910R2-4Q

315MHz, 11~24 VAC/VDC, 10A@24VDC per relay 433.92MHz, 11~24 VAC/VDC, 10A@24VDC per relay

• Control garage doors, house lights, etc. • Programmable output modes: – 4-sec Momentary – 1-sec Momentary – Toggle – Validity – Latch (SK-910RB2Q only) • LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared

• Control garage doors, house lights, etc. • Programmable output modes: – 4-sec Momentary – 1-sec Momentary – Toggle – Validity – Latch (SK-910RBQ only) • LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared

Alarm pager system

• Monitors up to three zones per premises or vehicle, plus manual paging. • Connect to burglar or communications panels. • Range: Up to 1/2 mile* (0.8km). • Includes belt-clip vibrating receiver (E-37RV).

E-37RV

Vibrating Receiver

Standard receivers only: • Independently programmable outputs

Mini Receivers SK-910RAQ SK-910RAVQ

Mini Receiver

315MHz, 11~24 VAC/VDC, 3A relay 315MHz, 3~13.8VDC, 5A transistor ground output

SK-910RAV2Q

315MHz, 3~13.8VDC, two 3A transistor ground outputs

• Extra belt-clip vibrating receiver.

E-37ANT

• Same as SK-910RB2Q series, but in smaller housing, no latch mode

• Same as SK-910RBQ series, but in smaller housing, no latch mode

Optional Antenna

• Use as an alternative to AM or CB antenna.

SK-910RAQ

Extended Range Antennas SK-910R3Q SK-910R3-4Q

315MHz, 11~24 VAC/VDC, 10A@24VDC per relay 433.92MHz, 11~24 VAC/VDC, 10A@24VDC per relay

• Control garage doors, house lights, etc. • Programmable output modes: – Timed (1, 2, 3, 4, 5, 10, 30, or 60 seconds) – Toggle – Validity – Latch • LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared

RF Wireless Desktop Transmitter SD-862T-GWSQ

SK-910R4Q SK-910R4-4Q

• Control garage doors, house lights, etc. • Programmable output modes: – Timed (1, 2, 3, 4, 5, 10, 30, or 60 seconds) – Toggle – Validity – Latch • LED Indicates RF reception, learn mode entered, transmitter learned, memory cleared

RF Wireless RTE Plates

Wireless 2� square, green pushbutton

SD-8202GT-PEQ SD-8201GTPE1Q SD-8103GT-PEQ

• • • • •

315MHz, 11~24 VAC/VDC, 10A@24VDC per relay 433.92MHz, 11~24 VAC/VDC, 10A@24VDC per relay

Desk mount or wall mount wireless RTE button Completely wireless and portable No exposed antenna 8VHLQRIÂżFHVIDFWRULHVLQVWLWXWLRQVRUUHVLGHQFHV Single-gang faceplate, back box included

SK-91ERSD SK-93ERSD

315MHz 433.92MHz

• Extends the range of SECO-LARM RF receivers • Plugs directly into the receiver

• Convert your product to wireless control • $OOSURGXFWVDUH)&&RU&(FHUWL¿HGEULQJ\RXU product to market faster • Contact SECO-LARM for more info

2� Square, Green, Illuminated Pushbutton Green Mushroom Pushbutton Slimline, small square Illuminated Pushbutton

• For hard-to-wire installations • Built-in RF transmitter (similar to SK-919TD1S-UPQ; see above for compatible receivers) SD-8202GT-PEQ SD-8103GT-PEQ

*Actual range may vary depending on installation and operation environment

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

3

600-lb Single-Door Maglocks E-941SA-600Q E-941SA-600PQ

1,200-lb Single-Door Maglocks E-941SA-1200Q E-941SA-1K2PQ

Standard lock Bond sensor, status LED

E-941SA-1K2PDQ

• • • • • • •

• • • • • • •

600-lb (272kg) Holding force 12 or 24 VDC Selectable operation No residual magnetism MOV surge protection Anodized aluminum housing (US28) Adjustable mounting and detachable faceplate Mounting brackets available (see page 5)

E-941SA-600PQ Only: • Built-in dual-colored status LED and bond sensor to show locking status

Standard lock

1,500-lb Maglock E-941SA-1K5Q

Standard lock, indoor use

Bond sensor, status LED Bond sensor, status LED, timer

1,200-lb (545kg) Holding force 12 or 24 VDC Selectable operation No residual magnetism MOV surge protection Anodized aluminum housing (US28) Adjustable mounting and detachable faceplate Mounting brackets available (see page 5)

E-941SA-1K2PQ and E-941SA-1K2PDQ Only: • Built-in dual-colored status LED and bond sensor to show locking status

• • • • • •

1,500-lb (680kg) Holding force Anodized aluminum 12 or 24 VDC selectable operation No residual magnetism MOV surge protection Mounting brackets available (see page 5)

Magnetic Door Holders DH-151SQ Surface-mount with backbox, UL listed

DH-171SQ Flush-mount, UL listed

600-lb Double-Door Maglocks E-941DA-600Q E-941DA-600PQ

Double-door, standard lock Bond sensor, status LED

1,200-lb Double-Door Maglocks E-941DA-1K2Q E-941DA-1K2PQ

Double-door, standard lock Bond sensor, status LED

DH-151SQ

• • • • • • •

600-lb (272kg) Holding force each door 12 or 24 VDC Selectable operation No residual magnetism MOV surge protection Anodized aluminum housing (US28) Adjustable mounting and detachable faceplate Mounting brackets available (see page 5)

E-941DA-600PQ Only: • Status-sensing relay output and dual-color status LED

• • • • • • •

1,200-lb (545kg) Holding force each door 12 or 24 VDC Selectable operation No residual magnetism MOV surge protection Anodized aluminum housing (US28) Adjustable mounting and detachable faceplate Mounting brackets available (see page 5)

E-941DA-1K2PQ Only: • Status-sensing relay output and dual-color status LED

DH-171SQ

• For use with door closers to control the release and closing of residential, commercial, and public doors • Adjustable armature plate reduces installation time and adjusts to door alignment changes • Fail-safe operation • Holding force – 33-lb (15kg) • Three voltages: 12VAC/VDC, 24VAC/VDC, 120VAC • Extension bars available: ½”, ¾”, 1”, 2”, 3”, 4”, 5”, 6”, 7” • Cast aluminum faceplate • Built-in voltage spike suppressor

E-941EC2-N1Q

2.4mm Wide-angle lens Patented

400-lb Maglock E-941SA-80Q

• • • • • • •

4

Standard lock, indoor use

For small, low-security drawers or cabinets 80-lb (36kg) Holding force@12VDC 110-lb (51kg) Holding force@24VDC 12~24 VDC Operation No residual magnetism MOV surge protection Anodized aluminum housing (US28)

info@superior-elec.com

E-941SA-400Q

• • • •

Standard lock, indoor/outdoor use

400-lb (181kg) Holding force 12VDC Operation No residual magnetism MOV surge protection

Tel: 886-2-2378-6161

• Seamlessly integrates with all 1,200-lb single or double-door maglocks (see above) • Wide-angle 2.4mm lens for discreetly monitoring doorways and lobbies • 12VDC Operation

Fax: 886-2-2378-6163

www.enforcer.com.tw

Z Brackets

E-941S-600/ZQ E-941S-1K2/ZQ E-941S-1K5/ZQ

SD-997B-GBQ

For 600-lb maglocks For 1,200-lb maglocks

SD-997B-1SQ

Fail-safe Operation

For 1,500-lb maglocks

• For mounting on in-swing doors • Includes one L bracket and one Z bracket • $GMXVWDEOHIRUÀH[LEOH installation of armature plate • Includes cover plate for hiding mounting screws to prevent tampering

• 12/24 VDC Operation • Fail-safe operation – unlocks when power is lost • For concealed mounting • 5⁄8” (16mm) Bolt extension • Narrow design – 77⁄8”x1¼” (200x32 mm) • Door-position monitoring output (NO/NC/COM) Mounting brackets available: • SD-997SMB-AQ – Surface-mount bracket • SD-997UB-AQ – U-Bracket for glass doors

L Brackets

E-941S-600/LQ E-941S-1K2/LQ E-941S-1K5/LQ

Fail-safe Operation, 12/24VDC

For 600-lb maglocks For 1,200-lb maglocks For 1,500-lb maglocks

• For offset mounting • Includes one L bracket • Can be used as angle bracket

E-941S-400/LQ E-941S-400/LAQ

SD-997BQ

Fail-safe Operation, 12VDC

• Same as SD-997B-GBQ, but 12VDC input only.

SD-997A-GBQ

For 400-lb maglocks For 400-lb maglocks

E-941S-400/LQ

• 12VDC Operation • Fail-safe operation – unlocks when power is lost • For cabinets or small doors • For surface mounting • 9⁄16” (14mm) Bolt extension

Fail-secure Operation, 12/24VDC

E-941S-400/LAQ

SK-990AQ SK-990BQ

• • • •

• For offset mounting • Includes one L bracket • Can be used as angle bracket

Fail-secure Operation Fail-safe Operation

10~14 VDC Operation For entrance doors For use in wood doors %DNHGSDLQWHG¿QLVK

U Brackets E-941S-600/UQ E-941S-1K2/UQ

For 600-lb maglocks For 1200-lb, 1500-lb maglocks

• For glass doors • Includes one U bracket and one armature plate holder • Adjustable for 9~13 mm glass

Plate Spacers E-941S-600/PQ E-941S-1K2/PQ E-941D-600/PQ E-941D-1K2/P E-941S-1K5/PQ

3/16”

for 600-lb series 1/4” for 1200-lb series For 600-lb double-door For 1200-lb double-door

• • • •

Similar to SD-997B-GBQ, but fail-secure 12/24 VDC Operation Fail-secure operation – locks when power is lost Incorporates manual lock/unlock cylinder to operate deadbolt if power is lost

Fail-secure Operation Fail-safe Operation

SD-997SMB-AQ Surface-mount bracket for Deadbolt (SD-997B-GBQ and SD-997BQ)

• • • • •

For E-941SA-1K5Q

• Extends door stop to create ÀDWVXUIDFHPRXQWLQJDUHD

12VDC Operation Reversible for right or left-handed doors Non-polarized connection Shallow design for use on most doors 6XLWDEOHIRURI¿FHW\SHDSSOLFDWLRQV

SD-997UB-AQ

Armature Plate Holder E-941S-600/HQ E-941S-1K2/HQ

SD-995AAQ SD-995BAQ

U-Bracket for glass doors for Deadbolt

For 600-lb maglocks For 1,200-lb, 1,500-lb maglocks

(SD-997B-GBQ and SD-997BQ)

• For mounting the armature plates to a metal-core door or for non-standard armature installations • Provides extra security for the armature plate

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

5

Access Control Power Supplies EAP-3D1Q EAP-3D1MQ

DG-311M

3 Amps, 1 Output

Safety door latch

PR-312S-PQ

Indoor use, 500 users

Board only

Patented

• 3A@12VDC / 3A@24VDC • AC Power failure supervision relay with programmable delay timer (5 secs, 5 mins, or 5 hrs) • Automatically switch to backup battery • Field selectable 12/24 VDC output • Heavy-duty steel case and removable cover • Board designed with LED overload indicator and automatic shutdown for short-circuit protection • Over-current fuse-protected AC input • Built-in back-up battery charger • Individual AC input and DC output LED status indicators

EAP-5D1Q EAP-5D1MQ EAP-5D5Q

Stand-Alone Proximity Card Readers

Anti-Pick Safety Door Latch

5 Amps, 1 Output

• Patented anti-pick swing latch design. Cannot be unlocked from the outside • Used as a secondary security lock for hinged in-swinging doors • =LQFGLHFDVWDQGVDWLQQLFNHO¿QLVK • Easy to install and use

• Up to 5 super user cards, plus 1 master card • 10 Cards included (additional cards available – sold separately in packs of 10) • 1~60 sec or toggle • Status LEDs for operations and programming • Solid-state lock relay for longer life, lower power consumption, and shock/vibration resistance

PR-K1S1-A

Access Power Distribution Boards PD-4BTQ PD-8BTQ

4 Channel, 12/24 VAC/VDC 8 Channel, 12/24 VAC/VDC

Proximity cards

• Sold in packs of 10 • For use with all SECO-LARM Proximity Readers

Board Only

PR-K1K1-AQ

5 Amps, 5 Outputs

Proximity keyfobs

• Sold in packs of 10 • For use with all SECO-LARM Proximity Readers PD-4BTQ

• • • •

Multiple access control trigger inputs Independently controlled blade fused outputs Fail-safe and/or fail-secure power outputs Multiple 10A Form C relay outputs

RF Wireless Keypad

EAP-5D5Q

• Same as EAP-3D1Q except 5A@12VDC / 2.5A@24VDC

EAP-7D1Q EAP-7D1MQ

7 Amps, 1 Output Board only

SK-5611-SPQ

Power Distribution Module PD-5PAQ

5 Channel, 12/24 VAC/VDC

PD-5PAQ

• Same as EAP-3D1Q except 7A@12VDC / 3.5A@24VDC

6

info@superior-elec.com

Wireless keypad

• Five individually PTC-fused outputs • Output fuses rated 1.1 Amps • Individual LED status indicator for each output, power input, and trigger. • Power failure supervision relay (3A@24VDC) • Auxiliary supervision relay (3 Amps @ 24VDC) • Dimensions - 39/16”x55/16”x11/16” (90x135x27 mm)

Tel: 886-2-2378-6161

• • • • • • • •

Range up to 100ft (30m) 433.92MHz Wireless frequency Anti-tamper output Dual-color LED status indicator Up to 1000 user codes Code length of 4~8 digits Rugged weather-resistant (IP66) keypad housing Includes RF receiver

Fax: 886-2-2378-6163

www.enforcer.com.tw

Fingerprint Reader and Keypad SK-2323-SDQ SK-2323-SPQ SK-2323-SPAQ

Standard keypad Keypad with proximity reader Piezoelectric keypad with proximity reader

• 1,010 Users • Adjustable user code length (2~6 digits) • 12~24 VAC/VDC Operation • Two relay outputs (1A@30VDC) • Relays have programmable output time (1~99 SK-2323-SPQ SK-2323-SPAQ seconds or toggle) • Weatherproof design – circuitry is potted with epoxy • Backlit keys for easy nighttime use • Two egress inputs, door sensor input

SK-1323-SDQ SK-1323-SPQ

Standard keypad Keypad with proximity reader

• 1,010 Users • Adjustable user code length (2~6 digits) • 12~24 VAC/VDC Operation • Two relay outputs (1A@30VDC) • Relays have programmable output time (1~99 seconds or toggle) • Weatherproof design – circuitry is potted with epoxy SK-1323-SPQ • Backlit keys for easy nighttime use • Two egress inputs, door sensor input

SK-1011-SDQ SK-1131-SPQ

Standard keypad, 1 output

SK-1011-SDQ

SK-1131-SPQ

• Up to 1,000 possible user codes • 12~24 VAC/VDC Operation • Up to 50 (01~50) possible temporary visitor codes, programmable for one-time or limited-time use • Output: Form C Relay, 1A@30VDC max., for door lock/unlock • All outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours) • Smart egress input • 5HDOWLPHFORFNGLVDEOHVDFFHVVDWVSHFL¿FWLPHV SK-1131-SPQ Only: • Up to 1,000 possible user codes and/or proximity cards programmable for output #1, 100 for output #2, 100 for output #3 • Built-in prox. card reader 125kHz (EM125) • Output #2: Form C Relay, 1A@30VDC • Output #3: Transistor ground, 100mA@24VDC

SK-1123-SPQ SK-1123-SDQ

'3,2SWLFDO¿QJHUSULQWUHDGHU Form C relay output Pulse mode, Toggle mode 9HUL¿FDWLRQ)LQJHUSULQW3,1 8VHUFDSDFLW\XVHUV¿QJHUSULQWXVHUV 500 PIN users) • PIN length: 4~6 digits • 12VDC Operation • Access control interface for 3rd party electric lock, exit button, alarm, etc.

Flush-Mount Outdoor Access Keypad SK-1123-FDQ

1,100 Users

Proximity Reader, 1,100 Users 1,100 Users • 12~24 VAC/VDC Operation • 4~8 digits user code • 2 Outputs (#1: Form C Relay, 1A@30VDC, #2: Transistor ground, 100mA@24VDC) • Outputs have programmable output time (1~99,999 sec. or toggle) • Egress input, tamper switch, door sensor input

SK-1123-SDQ

• • • • •

info@superior-elec.com

• • • • •

Outdoor Access Control Keypads

Built-in proximity card reader, Keypad and control board

• Split-Series keypad - keypad and control board are separated for high security applications • Built-in prox. card reader. 125kHz (EM125) • 1,200 Users over 3 outputs. Code length 4-8 digits • 12~24 VDC Operation • Built-in door chime • 4 available programmable access modes for all outputs: card only, code only, card and common user code, card and unique user code • Up to 50 possible temporary visitor codes • Smart egress input • 5HDOWLPHFORFNGLVDEOHVDFFHVVDWVSHFL¿FWLPHV

1,000 Users

Keypad w/ proximity reader

Split-Series Keypad with Proximity Reader SK-4131-SPSQ

SK-2611-SFSQ

• • • • • •

12~24 VAC/VDC Operation Up to 50 (01~50) possible temporary visitor codes, Output #1: Form C relay, 1A@30VDC max. Output #2: Form C relay, 1A@30VDC max. Outputs #1, #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours) Duress code signals a silent alarm if an authorized user is forced to open the door under duress Smart egress input 5HDOWLPHFORFNGLVDEOHVDFFHVVDWVSHFL¿FWLPHV All features are programmed directly from the keypad: No need for an external programmer IP66 Weatherproof Rating Door sensor input for anti-tailgating operation

SK-1123-SPQ Only: • Built-in prox. card reader 125kHz (EM125)

Tel: 886-2-2378-6161

Digital Access Keypad with 3 Outputs

SK-1123-SPQ

SK-1131-SAQ

• • • • • •

120 Users over 3 outputs

12~24 VAC/VDC Operation Code length 4~8 digits Output #1: Form C relay , 5A@28VDC Output #2: Form C relay , 1A@28VDC Output #3: Transistor ground, 100mA@24VDC Backlit keys for easy nighttime use

Fax: 886-2-2378-6163

www.enforcer.com.tw

7

SD-7201GC-PEQ

English, Green button English and Spanish, Green button English and Spanish, Green button, DPDT Switch

SD-7201GCPE1Q SD-7201GFPE1Q • NO/NC Contacts rated 5A@125VAC • Stainless steel faceplate • Weatherproof

SD-7275SGEX1Q SD-7175SGEX1Q • • • •

Single-gang (red/green LED) Slimline (red/green LED)

Illuminated pushbutton Vandal-resistant 1� Diameter pushbutton NO/NC Contacts rated 5A@250VAC

Single-gang, Green mushroom pushbutton Single-gang, Red mushroom pushbutton

SD-7213-GSP SD-7213-RSP

• Built-in pneumatic timer requires no external power • NO/NC Contacts rated 5A@125VAC • Built-in timer, 1~60 seconds SD-7213-RSP

SD-7201GC-PEQ

SD-7201RCPE1Q

SD-7201GCPE1Q

English and Spanish, Red button

• Similar to SD-7201GCPE1Q, but with red mushroom-cap pushbutton

SD-7204SGEX1Q SD-7104SGEX1Q

SD-7217GWQ

• Vandal-resistant • 1� Diameter pushbutton • NO/NC Contacts rated 5A@250VAC

Blank, Green button

• NO/NC Contacts rated 5A@125VAC • White plastic plate

Single-gang plate Slimline plate

SD-7202GC-PTQ SD-7201GAPT1Q

Single-gang, Square Single-gang, Mushroom, English and Spanish

SD-7103GC-PTQ

Slimline

SD-7201GAPT1Q

Single-gang Slimline Single-gang, Manual override button Slimline, Manual override button

SD-6276-SSVQ SD-6176-SSVQ

Illuminated Vandal-Resistant RTE Plate with Timer & Buzzer SD-7257-SSTQ SD-7157-SSTQ

SD-6276-SS1Q SD-6176-SS1Q

• Piezoelectric pushbutton has no moving parts • Built-in programmable (red/green) LED • Weather resistant (IP65) • Built-in timer, 1~30 seconds or toggle

Single-gang plate

SD-6276-SSVQ

SD-6176-SS1Q

Slimline plate Single-gang, N.C., Black button SD-7201KBQ SD-7101KBPE1Q Slimline, N.C., Black button SD-7101RAEX1Q Slimline, N.O., Red button

SD-7103GC-PTQ

• Built-in timer, 1~180 seconds • Illuminated green push-button (SD-7202GC-PTQ & SD-7103GC-PTQ) with LED for longer life

• • • • • • •

Vandal-resistant 12~24 VDC Operation NO/NC Contacts rated at 1A@30VAC Weatherproof (IP65) Dual color LED (red/green) Built-in timer, 0.5~60 seconds or toggle Built-in adjustable buzzer

• Pushbutton includes ring guard SD-7201KBQ and SD-7101KBPE1Q Only: • N.C. Contact rated 1A@125VAC SD-7201KBQ

SD-7101RAEX1Q

Mullion Surface-Mount RTE Bars SD-7623-GSTQ SD-7202GC-PEQ SD-7103GC-PEQ SD-7223GW-LQ

Single-gang Slimline Single-gang, White plastic

SD-7202GC-PEQ

RTE bar with dual-color LED

SD-7103GC-PEQ

SD-7223GW-LQ

• Illuminated green pushbutton with LED for longer life • NO/NC Contacts • Switchable English, French, and Spanish messages

info@superior-elec.com

SD-7093-SGDQ

• %XLOWLQ/('¿HOG programmable (red/green) • Built-in timer, 1~180 sec. • 12/24 VDC Operation • NO/NC Contacts rated 3A@24VDC

SD-7217-GSBQ

8

RTE plate with dual-color LED and timer

RTE plate with LED and adjustable buzzer

• Built-in adjustable buzzer (85~98 dB) • %XLOWLQ/('¿HOG programmable (red/green) • 12/24 VDC Operation • NO/NC Contacts rated 10A@125VAC

Tel: 886-2-2378-6161

• • • • • •

Illuminated text for easy visibility Press anywhere on surface to activate contact Thin attractive design (½�) Mullion sized mounting Form C contact rated 1A@30VDC 12~24 VDC Operation

Fax: 886-2-2378-6163

www.enforcer.com.tw

RF Wireless Desktop Transmitter

Mini RTEs PB-2618-GQ PB-2318-SQ

Wireless 2” square, green pushbutton

SD-862T-GWSQ

Green mushroom button, N.O. Flush-mount button, SPDT switch

PB-2618-GQ

PB-2318-SQ

• Contacts rated 3A@36VDC • Large metal buttons • Surface-mount with back box (PB-2618-GQ only)

PB-5118-GQ

Green mushroom pushbutton, N.O.

PB-5318-SQ

Flush-mount button, SPDT switch Illuminated pushbutton, SPDT switch

PB-5348-SQ

• Desk mount or wall mount wireless RTE button • For hard-to-wire installations • Range up to 250ft (76m) • Single-gang faceplate, back box included

SD-8103GT-PEQ

PB-5318-SQ

SD-8103GT-PEQ

SD-8202GT-PEQ

• For hard-to-wire installations • Built-in RF transmitter (similar to SK-919TD1S-UPQ; see page 18 for compatible receivers)

Flush-mount

• Contacts rated 3A@36VDC • Large green metal mushroom button • N.O. Button

SD-72051-V0

Rocker Switches with back box, PB-2811-WWQ Surface-mount 211/16"x211/16"x11/8" (69x69x35 mm) Surface-mount with back box, PB-1811-WWQ 37/16"x37/16"x15/16" (86x86x33 mm) Flush-mount, PB-1311-WWQ 33/8"x33/8"x17/16” (86x86x36 mm) Surface-mount, PB-5811-WWQ 33/8"x111/16"x7/8" (86x43x23 mm)

Spanish- with timer* French French- with timer* White plate, English, Spanish, and French Messages Included

SD-927PKC-NSQ

SD-927PWCQ

• No touch – just wave a hand in front of the sensor • Sensing range up to 4” (10cm), 12VDC • Attractive “ring” illuminator turns from red to green or green to red (selectable) *Timer Adjustable 1-30 seconds

SD-71051-V0 SD-72002-V0 SD-71002-V0

SD-9263-KSVQ SD-9163-KSVQ SD-9263-KSQ SD-9163-KSQ SD-9263-KS1Q SD-9163-KS1Q

Slimline, Maintained ON/OFF

SD-9963-KSGQ

PB-5811-WWQ

Slimline, English, manual override Single-gang, English Slimline, English Single-gang, Spanish Slimline, Spanish

SD-9263-KSVQ

SD-9163-KSVQ

• • • •

No touch – just wave a hand in front of the sensor Weatherproof (IP65) for outdoor use Adjustable sensing range up to 7” (18cm) Attractive “ring” illuminator turns from red to green or green to red (selectable) • 12~24 VDC Operation • Built-in timer, 0.8~30 seconds or toggle

SD-71002-V0

Surface Mount Boxes SE-622-AQ SE-623-AQ X-2002DK03BK%

PB-1811-WWQ

• Contacts rated 3A@36VDC, PB-1311-WWQ is rated 1A@24VDC • Rocker switch • SPDT Switch (NO/NC/COM)

Single-gang, English, manual override

Single-gang, Maintained ON/OFF

• N.C. Turn to open • Pre-wired switch

PB-1311-WWQ

Spanish

Single-gang, shunt ON/momentary OFF Slimline, shunt ON/momentary OFF

SD-72002-V0

PB-2811-WWQ

English- with timer*

PB-5348-SQ

• Contacts rated 3A@36VDC • Flush-mount with back box

PB-5115-GQ

SD-927PKC-NEQ

2” Square, green, illuminated pushbutton Slimline, small illuminated pushbutton

English

SD-927PWCQ

RF Wireless RTE Plates SD-8202GT-PEQ

PB-5118-GQ

SD-927PKC-NEQ SD-927PKC-NETQ SD-927PKC-NSQ SD-927PKC-NSTQ SD-927PKC-NFQ SD-927PKC-NFTQ

Post-mount No-Touch Sensor

• “Goose-neck” mounting • No touch – just wave a hand in front of the sensor • Adjustable sensing range up to 7” (18cm) • 12~24 VDC Operation • Built-in timer, 0.8~30 seconds or toggle • Manual override button

Single-Gang Back Box European Plate Back Box Single-Gang Back Box, Plastic

• Surface mount - Back box white • SE-622-AQ for Single-gang wall plates, dimensions: 27⁄8”x45⁄8”x115⁄16” (72.6x117x49 mm) • SE-623-AQ for European wall plates, dimensions: 39⁄16”x3½”x115⁄16” (90.5x89x49 mm) • X-2002DK03BK% for Single-gang wall plates, dimensions: 27⁄8”x45⁄8”x17⁄16” (73x118x36 mm)

SE-622-AQ

SE-623-AQ

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

9

Timers (N.O., Turn to Close)

SS-090

Key removable in both ON and OFF positions

SS-299Q SS-199Q

Single-gang

SA-025MQ

Multi-purpose timer

Slimline

Patented

• Two terminals, shunt SPST • Maintained ON-OFF, key removable from both ON and OFF positions • Specify key number when ordering

SS-090-1

SS-199Q

• Stainless-steel plate with /4� D-hole 3

SS-399Q

Square-type

Delayed egress timer

N.O.

12~24 VAC/VDC Operation 3 Relock modes Programmable pre-delay timer (1~30 seconds) Programmable post-delay timer (1~60 seconds) Programmable nuisance delay timer (0~3 seconds) Lock relay and remote alarm relay outputs (Form C, 10A@24VDC) • Local alarm output (transistor ground)

N.C.

SA-027HQ

• Same as SS-299Q, but Square-type 86x86mm

Key removable from OFF position only

Remote Plate with LEDs SS-129TO SS-129TC

• Two terminals, momentary SPST • Maintained OFF, springs back from ON, key removable from OFF only • Specify key number when ordering

SS-090KN

• Attractive, high security stainless steel plate • Built-in tamper switch gives complete security • Two LEDs for zone status indicator, and system ON indicator • D-type mounting hole for Key Lock Switches

Spare/Replacement Keys

• Extra keys. Specify number when ordering (1300~1310)

SS-080FM

SD-C141S

Door close

• • • • • •

Programmable annual timer

• 12~24 VAC/VDC Operation • Two Form C relays rated 10A@14VDC • Events can be set weekly, daily, or hourly, over the course of an entire year • Each relay can be programmed for 50 events for a total of 100 events • Programmable security code • Manual operation of relays • Block programming allows events to be repeated • One egress input per relay • Adjustable output time (1~99 seconds or toggle) • Holiday programming (up to 10 events)

SA-027WQ

Programmable 7-day timer

Miniature Tubular Key Switch with Flat Key, Shunt ON/OFF

• Two terminals, shunt SPST • Maintained ON-OFF, key removable from both ON and OFF positions

10

SA-025EQ

Key removable in OFF position

• Similar to SS-090, but key removable in OFF position only

SS-095

SS-299Q

• 12/24 VDC operation • Easily programmable to give an audible/visual alarm or trigger an output after a set time • Perfect for helping avoid a garage door left open, WULJJHULQJDJXDUGÂśVÂľIDLOWRSDWURO´QRWLÂżFDWLRQRU many other ‘countdown’ actions • Dry 10A@24VDC NO/NC/COM relay output

info@superior-elec.com

• Surface-type door closer • Non-handed operation • Separate adjustment of both closing and latch speeds

Tel: 886-2-2378-6161

• • • • • • •

12~24 VAC/VDC Operation One Form C relay rated 10A@120VAC/28VDC Up to 60 programmable events Block programming allows events to be repeated Adjustable output time (1~99 seconds or toggle) Programmable security code Egress input and manual mode button

Fax: 886-2-2378-6163

www.enforcer.com.tw

E-960-D90Q E-960-D190Q E-960-D290Q E-964-D390Q

E-964-Q330Q E-964-Q495Q E-964-Q660Q

Range: Up to 90ft (30m) Range: Up to 190ft (60m) Range: Up to 290ft (90m)

Range: Up to 330ft (100m)

CS-PD115-PAQ

IR Proximity sensor

Range: Up to 495ft (150m) Range: Up to 660ft (200m)

Range: Up to 390ft (120m)

• 12~24VDC Operation, 30mA current draw • Triggers a warning or locking device when the sensor is tripped • Front panel is suitable for outdoor use (IP65) • Form C relay: 1A@30VDC

Patented

E-931-S50RRLQ

• 10~30 VAC/VDC Operation (non-polarized) • Current: Up to 88mA@12VDC (Depending on model) • For indoor or outdoor use • Form C relay: 1A@120VAC • N.C. Tamper circuit included • Adjustable interrupt time (50~700ms) • Built-in laser beam alignment system • Light-on operation • Patented E-964-D390Q Only: • 4 Programmable frequencies eliminate possible interference when installing multiple photobeams in close proximity

E-9622C2B25Q E-9641C4B25Q E-9660C6B25Q E-9679C8B25Q

2-Beam, Ht. 57cm (1.9ft) 4-Beam, Ht. 105cm (3.4ft) 6-Beam, Ht. 152cm (5ft) 8-Beam, Ht. 201cm (6.6ft)

• 12~24 VAC/VDC Operation (non-polarized) • Current: Up to 290mA@12VDC (Depending on model) • Environmental output sends signal if weather conditions are poor, helping prevent false alarms • For indoor or outdoor use • Form C relay: 1A@125VAC/24VDC • N.C. Tamper circuit included (50~700ms) • Adjustable interrupt time • Built-in laser beam alignment system • 4 Programmable frequencies eliminate possible interference when installing multiple photobeams in close proximity • Built-in alignment strength indicator • Light-on operation

Range: Up to 50ft (15m)

• 12~250 VAC/VDC Operation • Current: Up to 100mA@12VDC • /DUJHVHQVRUDQGUHÀHFWRUIRUPRUHFRQYHQLHQW alignment and adjustment • Weatherproof for indoor and outdoor use (IP55) ,QFOXGHVKRRGIRUVHQVRUDQGUHÀHFWRU • Wall or pole-mountable • Form C relay: 0.5A@30VDC • N.C. Tamper circuit included • Light-on operation

Miniature Single Photobeams E-961-S50TB

• Install in windows, doorways, skylights, fence tops, any place where space is limited • Slim-line design (13/8”x13/16”) (35x30 mm) • Triggers on breaking of any single or 2 adjacent beams (programmable) • Rugged aluminum construction • Weatherproof IP65 construction • Anti-tamper circuit triggers alarm if power is cut or end cap is removed • No synchronizing wires required • N.O./N.C. relay output, 1A @12~24 VDC. • LED alignment indicator • L-brackets and mounting hardware included

info@superior-elec.com

• • • • • • • •

Range: Up to 50ft (15m)

10~24VDC Operation %XLOWLQ$*&FRQWUROWR¿OWHURXWOLJKWLQJGLVWXUEDQFHV Signal strength indicator for easier alignment LED indicators for power, signal strength, and alarm Small size for a less conspicuous installation Simple to install Weatherproof for indoor and outdoor use (IP65) Mounting hardware included

Tel: 886-2-2378-6161

E-931-S45RRQ

• • • • • •

Range: Up to 45ft (14m)

12~250 VAC/VDC Operation Current: Up to 70mA@12VDC For indoor or outdoor use (IP66) Adjustable response time and sensing range ,QFOXGHV´URXQGUHÀHFWRUDQGKRRG New single-gang box and wall-mount bracket available (see page 12)

Fax: 886-2-2378-6163

www.enforcer.com.tw

11

Twin Photobeam Detector E-936-S45RRGQ

E-960-D90GQ

Range: Up to 45ft (14m)

Range: Up to 90ft (30m)

Patented

• • • • • • • • •

• • • • • • • •

12-30V DC/AC 60Hz, 100mA 0RQLWRUHGRXWSXW1&NČ?5HVLVWRU Adjustable sensor range ,QFOXGHV´URXQGUHĂ€HFWRU KRRG Form C relay: NO/NC/COM, 2A@30VAC/VDC Dual-color LED alignment Pre-wired 6ft (1.8m) cord Weatherproof for indoor and outdoor use (IP66) Light-on operation

E-931-S35RRQ

12-30V DC/AC 60Hz, 200mA 0RQLWRUHGRXWSXW1&NČ?5HVLVWRU Form C relay: 1A@30VAC/VDC N.C. Tamper circuit Built-in laser beam alignment system “Uâ€? Brackets included for pole mounting Light-on operation Patented

IW5HÀHFWLYH³3XOVH´6HQVRU E-939-S50RHGQ

Range: Up to 50ft (15m)

• Multimode sensor with 1NČ?5HVLVWRU, N.C., and pulse/heartbeat (2 wire, 4 wire) monitoring • /DUJHVHQVRUZLWKSDWHQWHGGHVLJQDQGODUJHUHĂ€HFWRU for a large sensing area and easier alignment • Weatherproof for indoor/outdoor use (IP66)

E-931ACC-R2Q

´6TXDUHUHÀHFWRUIRU $OOUHÀHFWLYHVHQVRUV

E-931ACC-RC1Q ´5RXQGUHÀHFWRUIRU $OOUHÀHFWLYHVHQVRUV

Range: Up to 35ft (10m)

E-931-S50RRLQ

Range: Up to 50ft (15m)

E-931ACC-HR1Q

´6TXDUHRU´URXQGUHÀHFWRUKRRGIRU E-931CS22RRCQ, E-931CS22RFCQ, E-931-S50RRGQ, and E-931-S33PRGQ

E-931ACC-RL1

´6TXDUHUHÀHFWRUIRU $OOUHÀHFWLYHVHQVRUV

E-931ACC-HR1

´5RXQGRU´VTXDUHUHÀHFWRUKRRGIRU • • • • • •

E-931-S50RRGQ, and E-931-S33PRGQ

Dark-on operation 12~240 VDC/24~240 VAC Dual-color LED alignment 10ms Response time Pre-wired 6ft (1.8m) cord Weatherproof for indoor and outdoor use (IP66)

IW5HĂ€HFWLYH3KRWRHOHFWULF Beam Sensor E-931-S50RRGQ

• 12~250 VAC/VDC Operation • Current: Up to 100mA@12VDC • /DUJHVHQVRUDQGUHÀHFWRUIRUPRUHFRQYHQLHQW alignment and adjustment • Weatherproof for indoor and outdoor use (IP55) ,QFOXGHVKRRGIRUVHQVRUDQGUHÀHFWRU • Wall or pole-mountable • Form C relay: 0.5A@30VDC • N.C. Tamper circuit included • Light-on operation

Range: Up to 50ft (15m)

E-931ACC-SFQ

Additional wireless speaker unit for: E-931CS22RFCQ (See page 29)

E-931ACC-SQ

Additional speaker unit for: E-931CS22RRCQ (See page 29)

E-931ACC-SPQ Solar charger for sensor unit for: E-931CS22RFCQ (See page 29)

E-931ACC-CQ Digital counter for:

E-931-S33PRGQ

Range: Up to 33ft (10m)

E-931CS22RRCQ and E-931CS22RFCQ (See page 29)

E-931ACC-BLS6Q

6LQJOHJDQJĂ€XVKPRXQW bracket for: - E-931-S35RRQ - E-931-S45RRQ - E-936-S45RRGQ

E-931ACC-BLS7Q L bracket for Side Mounting for: • • • • • • • • •

12

12-30V DC/AC 60Hz, 100mA 0RQLWRUHGRXWSXW1&NČ?5HVLVWRU ,QFOXGHV´URXQGUHĂ€HFWRUVHQVRUZLWKKRRG Form C relay: 500mA@30VAC/VDC Dual-color LED alignment For outdoor gates, garage doors, etc. N.C. Tamper circuit Weatherproof for indoor and outdoor use (IP55) Light-on operation

info@superior-elec.com

• Polarized sensor is immune to shiny objects: triggers RQO\ZKHQFRUUHFWO\UHĂ€HFWHGOLJKWLVGHWHFWHG • 12-30V DC/AC 60Hz, 100mA • 0RQLWRUHGRXWSXW1&NČ?5HVLVWRU • Form C relay: 500mA@30VAC/VDC • Dual-color LED for beam alignment • N.C. Tamper circuit • Weatherproof for indoor and outdoor use (IP55) • Light-on operation

Tel: 886-2-2378-6161

- E-931-S35RRQ - E-931-S45RRQ - E-936-S45RRGQ

E-931ACC-BLS8Q

Wall or door frame bracket for: - E-931-S35RRQ - E-931-S45RRQ - E-931CS22RFCQ - E-931CS22RRCQ - E-936-S45RRGQ

Fax: 886-2-2378-6163

www.enforcer.com.tw

Multi-Purpose Battery Tester

Voice Dialer with Listen-In and Broadcast SL-126Q/X* SL-126-A24Q/X* SL-126LQ/X*

6~12 VDC Operation, UL

E-921CPQ**

Voice dialer with listen-in

ST-BT03Q

Battery tester, 6-in-1, 12/24 VDC

6~24 VDC Operation Lens Only

(SL-126Q ONLY)

• Simple 2-wire connection • Low current draw with long operating life of over 300 FRQWLQXRXVKRXUVÀDVKHV

• Includes protective inner cover. Protects the highvoltage xenon tube when lens cover is removed • Lens is made of high-impact resistant acrylic* • Mounting brackets available (see below)

SL-1301-EAQ/X* SL-1301-BAQ/X* SL-1301-SAQ/X*

• Delivers messages of up to 20 seconds to each number; delivers up to 5 numbers (up to 32 digits) • Listen-in and broadcast. Controllable by telephone • 3 Triggers (1 N.C., 2 NO/NC) • Remote monitoring – call-in to listen-in, broadcast, arm and disarm • Remote arm/disarm • Built-in backup battery • Built-in 105dB siren • 12VDC Operation • Low battery indicator • Built-in aux. output

• Tests for: – Voltage – PTC Fuse – Battery load – Polarity – Voltage drop – Continuity • Indicates the condition of rechargeable gel-type 12VDC batteries • Equipped with a momentary simulated load • Portable and easy to use • 12/24 VDC Operation • Includes headlight, LED and buzzer • Continuity LED

Basic Auto Dialer with Listen-In

12-LED, 6~12 VDC 32-LED, 9~12 VDC, 12VAC 54-LED, 9~24 VAC/VDC, Built-in siren

E-921APQ**

Basic auto dialer

ENFORCER 190

Audio discriminator

Patented

SL-1301-EAQ series: Similar to SL-126 series but with LED lights and the following extra features • Over 50,000 continuous hours (5.7 years) • Less heat generated than xenon-tube strobe light • Indoor/outdoor use • Lens is made of high-impact resistant acrylic* SL-1301-BAQ series: • Same as SL-1301-EAQ series, but with 32 SURJUDPPDEOH/('VGLIIHUHQWÀDVKSDWWHUQVDQG DGMXVWDEOHÀDVKLQJVSHHG DQG9ROWEDFNXSEDWWHU\ option for continuous operation SL-1301-SAQ series: • Same as SL-1301-BAQ series, but with 54 programmable LEDs and programmable siren

• Call recipient will hear “beepâ€? sounds to indicate sensor triggered • Dials up to 5 phone numbers (up to 32 digits) • 2 N.C. triggers • Listen-in controllable by telephone • Remote arm/disarm • Built-in backup battery • Built-in 105dB siren • 12VDC Operation • Low battery indicator • Built-in aux. output • Remote monitoring – call-in to listen-in, arm and disarm

Wire Guards GW-SD31W

Smoke Detector/Bell

• Patented design detects high-frequency sound RIJODVVEUHDNLQJZKLOH¿OWHULQJRXWDPELHQW environmental noise • When ceiling-mounted, the detector will protect a 25ft (7.6m) radius • Protects 45ft to the front and 25ft to either side • 2-Amp dry contact relay

Buzzers SH-504Q SH-506Q

91dB Buzzer, 5~15VDC 93dB Buzzer, 3~28VDC

• Surface-mount, or mount in ž� (19mm) hole of alarm panel or remote plate • Surface-mount only (SH-506Q) SH-504Q

SL-1901-JAQ

Conduit box bracket, Can be used with SL-1901-DAQ

• The conduit box and conduit drop bracket can be used as a set or independently • Compatible with SL-126 and SL-1301 Series

SH-513L • • • •

Protects against vandalism and accidental damage Oven baked paint for corrosion resistance 9-gauge steel wire welded at all points for strength Dimensions: Ă˜93â „16â€?x31â „8â€? (Ă˜234x80 mm)

*Choice of amber, blue, clear, green, or red lenses.. Replace “X´ZLWKÂżUVWFKDUDFWHURIWKHFRORU

info@superior-elec.com

Tel: 886-2-2378-6161

117dB Single-tone siren

• Miniature size: 3Ÿ� long, 3Ÿ� diameter • 6~12 VDC Operation • Current draw: 1A@12VDC ** For single-line analog telephone systems only

Fax: 886-2-2378-6163

www.enforcer.com.tw

13

Power Supply Charger in Enclosure SS-077Q

SA-025Q

SS-078Q

• Triggered via N.O. positive (+) trigger, N.C. negative (–) trigger, or by powering up the unit • Adjustable from 1 second to 60 minutes • Form C relay • Multiple program settings

• N.C. Latching panic button • N.O. Latching panic button

SS-078KEY

• Extra key for SS-077/078

SS-040Q/W

• N.C. Vibration/shock sensor • Adjustable sensitivity

Multipurpose timer

SA-026Q

SS-040Q/BR SS-052BB

Dual-stage protection against vandalism/intrusion: • High sensitivity trigger output for light taps • Normal sensitivity trigger output for more forceful attempts

Power supply with enclosure

Mini programmable timer

• Small size: 13⁄16”x29⁄32”x5⁄8” (30x58x16 mm) • Adjustable from 1~180 seconds • Buzzer output • Form C relay

• Same as SS-040Q/W, but brown

ST-2406-3AEQ

SA-025EQ Delayed egress timer • 3 Relock modes For additional timer products see page 10

• Convert 16~28 VAC input (transformer not included) to 6/12/24 VDC output • $SHDNUHJXODWHGDQG¿OWHUHGRXWSXW • 2 LEDs Indicate AC input and DC output • Short-circuit and thermal protection • Protected by fused battery output • Built-in backup battery charger compatible with lead acid or gel-type rechargeable battery • Switches to battery automatically as needed

SS-072Q

• For N.C. Tamper circuits

SS-073Q

• For N.O. Tamper circuits

SR-2112-C7AQ/10

SS-074Q/BG

• • • •

• N.O. Double-button momentary hold-up switch

SS-075Q

SS-075CQ

• • • •

• NO/NC “Emergency” button

SS-075C-PEQ

• Emergency & push-to-exit N.O. or N.C. (selectable) momentary contact • Three labels included

SS-076Q

• Toggle switch • Available in gray or white

• • • • •

• Red N.O. button

SS-033Q/BK

• Black N.C. button

SS-202Q

14

DPDT, Low current

12/24 VDC Operation Low current draw: 15mA 2-Amp, DPDT, Form C relay 3~24 VDC Trigger Large terminal blocks SPDT, High-sensitivity

2.0A, Plug-in, Switching

5.0A, Desktop, Switching • ³3OXJLQ´W\SH¿WVHDVLO\ on power strips • 100~240 VAC Input • Regulated 12VDC Output • 4ft (1.2m) Cord, 2.1mm ST-UV12-S1.0Q plug (positive center) • Use for CCTV, alarms, access control, etc. ST-UV12-S5.0Q only: • Green LED power indicator • Includes AC power cord ST-UV12-S5.0Q

info@superior-elec.com

6 / 12

1.5A

2A

6 / 12 / 24

2.0A

2A

6 / 12 / 24

2.5A

3A

6 / 12 / 24

4A

5A

6 / 12 / 24

7A

7.5A

6 / 12 / 24

9A

10A

DPDT, 5A

• 12/24 VDC Operation • High-sensitivity, low-voltage trigger • Two 7-Amp, Form C relays • 3~24 VDC Trigger

1.0A, Plug-in, Switching

Current (Peak)

6/12 VDC Operation 5-Amp, DPDT, Form C relay 6/12 VDC Trigger Large terminal blocks

SR-1212-C7ALQ

• Foil connection block

ST-UV12-S1.0Q ST-UV12-S2.0Q ST-UV12-S5.0Q

12/24 VDC Operation 5-Amp, DPDT, Form C relay 12/24 VDC Trigger Large terminal blocks

SR-1212-C2ALQ

SS-032Q/RD

Voltage (DC) Current

ST-1206-1.5AQ ST-2406-2AQ ST-2406-3AQ ST-2406-5AQ ST-2406-7AQ ST-2406-10AQ

DPDT, 5A

SR-2206-C5AQ • • • •

Model #

12/24 VDC Operation 7-Amp, SPDT, Form C relay 12/24 VDC Trigger Breakaway 10-pack

SR-2212-C5AQ

• N.O. “Emergency” button

SPDT, 7A

ST-BD01Q

12/24 VDC Operation (selectable)

• Prevents deep discharge of backup batteries • Adjustable voltage cutoff and restore point • Green LED AC indicator & 2-color LED DC indicator

Tel: 886-2-2378-6161

ST-2406-2AQ

ST-2406-10AQ

• Convert low-voltage AC input to low-voltage DC output power • 5HJXODWHGDQG¿OWHUHGRXWSXWYROWDJH • Short-circuit protection • Built-in backup battery charger • Switches to backup battery automatically in case of power loss

ST-UV16-W50Q ST-UV16-W100Q ST-UV24-W50Q ST-UVDA-W100Q ST-UVDA-W180Q

16VAC/50VA 16VAC/100VA 24VAC/50VA 24/28 VAC/100VA 24/28 VAC/180VA

• Dual-voltage input: 120/240 VAC, 50/60 Hz • Works with all SECO-LARM power supplies/chargers • Shielded windings reduce electromagnetic interference

Fax: 886-2-2378-6163

www.enforcer.com.tw

Wide-Gap Surface-Mount Contacts SM-200Q/BR SM-200Q/W

ž� Gap, Closed loop, Brown ž� Gap, Closed loop, White

• Standard surface-mount • Contact reed switch, deactivated rhodium on gold under-plating for longer expected life • Includes terminal cover • Screw terminals for quick installation • ž� (19mm) Gap • Switch dimensions: 2½�x9⠄16�x½� (63x14x13 mm)

SM-300Q/BR SM-300Q/W

½� Gap, Open loop, Brown ½� Gap, Open loop, White

• Similar to SM-200Q, but for open loops (N.C.) • ½� (13mm) Gap

SM-204Q/BR SM-204Q/W

2ž� Gap, Closed loop, Brown 2ž� Gap, Closed loop, Gray

SM-217Q/W

3⠄8� Stubby Press-Fit Recessed-Mount Contacts SM-207-5Q/BR SM-207-5Q/W

• Unique glue/epoxy compound protects reed switch • Switch and magnet have ribs for securing in holes • 15� (38cm) Leads • 3⠄8� (10mm) Gap • Switch dimensions: ž�x7⠄16�x3⠄8� (19x11x10 mm)

ž� Gap, N.C., White, side

SM-207-5LQ/BR SM-207-5LQ/W

1� Gap, Closed loop, Brown, Stubby switch/magnet 1� Gap, Closed loop, White, Stubby switch/magnet

Also Available: • SM-852LQ – Additional aluminum L bracket

SM-226RQ SM-226R-3Q

2ž� Gap, Closed loop 2ž� Gap, Open/Closed loop

(SM-226RQ only)

• • • •

Same as SM-226LQ, but with round bracket 24� (61cm) Leads enclosed in stainless-steel cable 2ž� (70mm) Gap Switch dimensions: 43⠄8�x1ž�x7⠄16� (111x44x11 mm)

SM-831

• 11/4� x 1/4� (32x6 mm) • Alnico 5 magnet

3⠄8� Press-Fit Recessed-Mount Contacts

SM-841

1� Gap, Closed loop, Brown

• 15/8� x 3/8� (41x10 mm) • Alnico 5 magnet

1� Gap, Closed loop, White

info@superior-elec.com

• Overhead door surface mount • 6ZLWFKFRQWDLQHGLQFXUYHGORZSUR¿OH cast-aluminum housing • Magnet in gray ABS plastic case mounted on L shaped bracket • 24� (61cm) Leads enclosed in stainless-steel cable • 2ž� (70mm) Gap • Switch dimensions: 43⠄8�x1ž�x7⠄16� (111x44x11 mm)

3⠄8� Gap, Closed loop, Brown, Stubby switch/magnet 3⠄8� Gap, Closed loop, White Stubby switch/magnet

ž� Gap, N.C., Brown, side

• Unique glue/epoxy compound protects reed switch • Switch and magnet have ribs for securing in holes • 15� (38cm) Leads • 1� (25mm) Gap • Switch dimensions: 13⠄8�x7⠄16�x3⠄8� (35x11x10 mm)

2ž� Gap, Open/Closed loop

2� Gap, Closed loop, White

• Similar to SM-207-5Q, but with 13⠄8� (35mm) long magnet and 1� (25mm) gap

SM-207Q/BR SM-207Q/W

2ž� Gap, Closed loop

(SM-226LQ only)

• )RUORRVH¿WWLQJGRRUVDQG windows • Wide gap, yet contact is no longer than conventional surface type • Concealed screw terminals for quick installation • 2� (51mm) Gap • Switch dimensions: 2½�x9⠄16�x½� (63x14x13mm)

1� Gap, Closed loop, White

• Similar to SM-204Q, but with side leads instead of center leads

SM-226LQ SM-226L-3Q

• )RUORRVH¿WWLQJGRRUV and windows • Screw terminals for quick installation • Includes spacers • 2ž� (70mm) Gap • Switch dimensions: 315⠄16�x½�x9⠄16� (100x13x14mm)

1� Gap, Closed loop, Brown

• 0LQLDWXUH³ÀDQJHW\SH´VXUIDFHPRXQW • 6FUHZPRXQWXVLQJÀDQJHV or adhesive mount (double-sided tape included) • Flange breaks off for extra miniature size • 15� (38cm) Leads extend from center of switch • 1� (25mm) Gap • Switch dimensions 13⠄8�x3⠄8�xŸ� (35x10x6 mm)

SM-205Q/BR SM-205Q/W

SM-216Q/BR SM-216Q/GY

Recessed-Mount Contacts SM-206Q/BR SM-206Q/W • • • •

SM-851 1� Gap, Closed loop, Brown 1� Gap, Closed loop, White

Ÿ� (6mm) Recessed mount with leads Available in brown or white 1� (25mm) Gap Switch dimensions: 1Ÿ�xŸ� (32x6 mm)

Tel: 886-2-2378-6161

Aluminum Z bracket for SM-216Q, SM-226LQ, & SM-226-L3Q

SM-852LQ Aluminum L bracket for SM-226LQ, SM-216, & SM-226-L3Q

Fax: 886-2-2378-6163

www.enforcer.com.tw

15

9-Ch 12VDC Switching CCTV Power Supply

4-Ch 12VDC Switching CCTV Power Supply PS-U0405-PULQ*

PS-U0910-PULQ*

4 Outputs, 5A Continuous

9 Outputs, 10A Continuous

18-Ch 12VDC Switching CCTV Power Supplies PS-U1810-PULQ*18 Outputs, 10A Continuous PS-U1820-PULQ*18 Outputs, 20A Continuous

• • • • • • • • •

120VAC Input 5A Continuous supply current Lightweight, cost-effective design Each output individually PTC fused@1.1A Adjustable output to compensate for voltage drop 12.6~13.5 VDC Individual output status LEDs Heavy-duty steel case with removable cover Built-in short circuit and overheat protection Low ripple voltage for improved image quality

• • • • • • • • •

120VAC Input 10A Continuous supply current Lightweight, cost-effective design Each output individually PTC fused@1.1A Adjustable output to compensate for voltage drop 12.6~13.5 VDC Individual output status LEDs Heavy-duty steel case with removable cover Built-in short circuit and overheat protection Low ripple voltage for improved image quality

24VAC CCTV Power Supplies

12VDC CCTV Power Supplies EVP-224D2-P4Q** EVP-224D4-P9Q** EVP-224D6P16Q**

4 Outputs, 2A Continuous 9 Outputs, 4A Continuous 16 Outputs, 6A Continuous

120VAC Input EVP-1SA4P9UL*

240VAC Input EVP-224A4-P9Q**

9 Outputs, 4A Continuous 9 Outputs, 4A Continuous

EVP-1SA8P16UL*

EVP-224A8P16Q**

16 Outputs, 8A Continuous 16 Outputs, 8A Continuous

EVP-224D4-P9Q

• • • • • • • • •

240VAC Input Output 6/12/24VDC, individually PTC fused@1.1A Individual output status LEDs Output voltage adjustable with potentiometer to compensate for voltage drop Main fuse (spare included) rated 5A@240VDC (3A@240VDC for EVP 224D2 P4Q) Main power switch for all outputs Heavy-duty steel case with removable cover Ventilation holes to prevent heat buildup Knock-out on cover for optional cam lock

EVP-224A4-P9Q

• • • • • • •

Output 24VAC Each output individually PTC fused@1.1A Main fuse rated 5A@240VDC (spare included) Main power switch for all outputs Heavy-duty steel case with removable cover Ventilation holes to prevent heat buildup Knock-out on cover for optional cam lock

Power Distribution Board PA-U0405-NULQ*

• • • • • •

4 Outputs, 5A Continuous

Universal 100~240 VAC input LED Power indicator Adjustable output voltage 12~13.8 VDC Built-in short circuit protection High-voltage and overcurrent protection Mounting bracket included

PD-9PSQ

• • • • •

PS-U1810-PULQ

• 120VAC Input • Continuous supply current: – PS-U1810-PULQ – 10A – PS-U1820-PULQ – 20A • Lightweight, cost-effective design • Each output individually PTC fused@1.1A • Adjustable output to compensate for voltage drop 12.6~13.5 VDC • Individual output status LEDs • Heavy-duty steel case with removable cover • Built-in short circuit and overheat protection • Low ripple voltage for improved image quality

PH-U1612-PULQ* PH-U1612-PTQ

• • • • • • • •

100-240VAC Input 12A Continuous supply current &RPSDFW8KHLJKW¿WVLQWRVWDQGDUG´UDFNV Each output individually PTC fused @ 3A Individual dual color output status LEDs Flexible cable management options Removable screw terminals Adjustable output to compensate for voltage drop 12.6~13.5 VDC

24VAC Rack-Mount CCTV Power Supplies PH-A1612-PUQ PH-A1612-PTQ**

info@superior-elec.com

1.1-Amp each output Main input power fuse Includes circuit board only PTC Fuses 5A main fuse

Tel: 886-2-2378-6161

16 Outputs, 12A Continuous 16 Outputs, 12A Continuous

9 Outputs, 5A

• • • • • • • •

Field-selectable 24 or 28 VAC output 120VAC Input 12A Continuous supply current &RPSDFW8KHLJKW¿WVLQWRVWDQGDUG´UDFNV Each output individually PTC fused @ 3A Individual dual color output status LEDs Flexible cable management options Removable screw terminals for convenient installation and reliable connections

* UL approved.

16

16 Outputs, 12A Continuous 16 Outputs, 12A Continuous

Fax: 886-2-2378-6163

** CE approved.

www.enforcer.com.tw

Plug-and-Play Plug-In Backup Battery SB-P1012-26Q

HD-TVI Vandal-ResistantIndoor/ Outdoor Wall-Plate Camera ST-LA108-TPQ ST-LA115-TPQ

Plug-in 2600mAh

0.8A 12VDC Output

EV-T5105-N2SQ

2.4mm, 1.3MP, 720p

1.5A 12VDC Output

ST-LA108-TPQ

• • • • • • • •

85~265 VAC Input 12VDC Output Replaceable Li-Ion 3.7VDC/2600mAh battery Backup time up to 70 minutes (depending on camera current draw) Auto-switch to internal battery during power failure Overcharge, over-discharge, overload, short-circuit, battery polarity protection LED indicators for power and backup 5.5-ft (1.4m) output cord with 2.1mm DC plug

Green LED power indicator Built-in overload protection 2.1mm DC Pigtail connector Input voltage: – 16~28 VAC/VDC (ST-LA108-TPQ) – 18~28 VAC/VDC (ST-LA115-TPQ) • Output voltage: 12VDC • • • •

ST-LA130-TTQ

3.0A 12/24VDC Output

Plug-and-Play In-Line Backup Battery SB-L10V1-20Q

In-line 2000mAh

Red and blue LED power indicators Built-in overload protection Output terminal blocks Input voltage: – 18~24 VAC/VDC for 12VDC output – 24~28 VAC or 26~28 VDC for 24VDC output • Output voltage: 12/24 VDC • Output current: 3A@12VDC, 1.5A@24VDC • • • •

• • • • • • • • •

5 / 7.5 / 9 / 12 VDC Input $XWRFRQ¿JXUH9'&RXWSXW Lithium Polymer 3.7VDC/2000mAh battery Backup time up to 60 minutes (depending on camera current draw) Auto-switch to internal battery during power failure Overcharge, over-discharge, overload, short-circuit protection LED indicators for voltage, power, alarm, backup Standard 2.1mm DC input jack 12� (30.5cm) output cord with 2.1mm DC plug

• 2.4mm Lens, 1/3.2� 1.3MP Sony STARVIS CMOS • /RZSUR¿OHGHVLJQ¹,QVWDOORQGRRUVZDOOV car bumpers, entryways, and more • Adjustable mounting angle • Includes two stainless-steel mounting plates (single-gang and slimline) • Camera can be installed without the plates • DWDR (Digital Wide Dynamic Range) for clear images in strong backlight • 2D-NR (2D Digital Noise Reduction) for clear images in low light • Rugged, weatherproof (IP67) design • Vandal-resistant design

Wide Angle Wall-Plate Camera EV-5105-N1SQ

2.4mm, 1000 TVL

Maglock Camera E-941EC2-N1Q

2.4mm, 1000 TVL

Patented

• Seamlessly integrates with 1200-lb maglock, see pg. 4 for more information • 960H Resolution, 1000 TVL • 1/3.2� 1.3MP Sony STARVIS CMOS • WDR (Wide Dynamic Range) • 2D-NR (2D Digital Noise Reduction) • Rugged, weatherproof (IP67) design • Heavy-duty vandal-resistant design • 12VDC Optional Bracket: • E-941E-1K2/LQ – Optional L-bracket

info@superior-elec.com

Tel: 886-2-2378-6161

• 960H Resolution, 1000 TV Lines • 2.4mm Lens, 1/3.2� 1.3MP Sony STARVIS CMOS • /RZSUR¿OHGHVLJQ¹,QVWDOORQGRRUVZDOOV car bumpers, entryways, and more • Adjustable mounting angle • Includes two stainless-steel mounting plates (single-gang and slimline) • Camera can be installed without the plates • DWDR (Digital Wide Dynamic Range) for clear images in strong backlight • 2D-NR (2D Digital Noise Reduction) for clear images in low light • Rugged, weatherproof (IP67) design • Vandal-resistant design

Fax: 886-2-2378-6163

www.enforcer.com.tw

17

LQ+'3DVVLYH Video Baluns EB-P101-01HQ EB-P101-20HQ

EB-P101-20HQ

Basic Ethernet Extender RYHU&RD[

Standard Balun

EB-T101-01HQ

Balun with 6” pigtail

• Range over 1080p with passive HD Balun: - HD-TVI: 1,050 ft (320m) - HD-CVI: 1,180 ft (360m) - HD-AHD: 1,180 ft (360m) • 12VDC Operation • Push pin terminal for easy install • 60dB crosstalk and noise immunity • Exceptional interference rejection

EB-P101-01HQ

• Range over 1080p: - HD-TVI: 623ft (190m) - HD-AHD: 820ft (250m) - HD-CVI: 754ft (230m) - Analog: 1,312ft (400m) • NTSC/PAL compatible • Lightning protection – Grade III • Exceptional interference rejection

4-in-1 HD active transmitter

EVT-AB1 EVT-TB1-42T EVT-RB1-4T2

Transmitter and receiver set Active transmitter Active receiver

NE-SE01-020Q

• • • • • • •

Up to 650ft (200m)

10/100 Mbps Full duplex Transmission distance: 650ft (200m) (RG59) Built-in surge protection Fast and easy to install Sold as set 1 Channel Ethernet over Coax Passive, no power required

LQ+'3DVVLYH%DOXQ with Pass-Through EB-P501-02HQ

Patented

HD balun with pass-through

EVT-RB1-4T2

• • • •

EVT-TB1-42T

NE-AE01-030TQ

Up to 984ft (300m)

Up to 1.5 mile (2.4km) with active receiver Video, data, and surge protection Patented interlocking design Power adapter included

Patented

• Range over 1080p: - HD-TVI: 623ft (190m) - HD-AHD: 820ft (250m) - HD-CVI: 754ft (230m) - Analog: 1,312ft (400m) • Patented ergonomic design includes built-in terminals for power or data pass-through • NTSC/PAL compatible • Screw terminals for easy installation • Lightning protection – Grade III • Exceptional interference rejection

LQ+'3DVVLYH Power Video Balun EB-P101-20HPQ

EVT-AH16-VT2Q

• Rack-mount or stackable • Transmits up to 3,940ft (1.2km) with passive baluns or 5,000ft (1.5km) with active transmitter • Compact 1U mounts in a standard 19” rack • Video in: 16, Video out: 32 • Power input: 12~24 VAC/VDC, Current: 500mA • Built-in video and data surge protection

4-in-1 HD Video, Power, and Data Combiners

HD power video balun

EB-P304-01MQ EB-P316-60MQ • Range over 1080p: – HD-TVI: 623ft (190m) – HD-AHD: 820ft (250m) – HD-CVI: 754ft (230m) – Analog: 1,312ft (400m) • Sold in pairs • NTSC/PAL compatible • Lightning protection – Grade III • Transmits video and power over Cat5e/6

LQ+'&KDQQHO3DVVLYH Balun Hub EB-P116-60HQ

16-Channel passive hub

EB-P316-60EQ

18

Connects up to 16 CCTV cameras 4-in-1 TVI / CVI / AHD / Analog compatible Passive operation – no external power required Range: Same as EB-P101-01HQ

info@superior-elec.com

16-Channel, end-point, rack-mount

• Transmits power and data to the camera while receiving video from the camera • Placed at DVR end

PoE Repeater NR-P101FQ

802.3af Compliant

• Extends power and data beyond normal limit of 328ft (100m) • Supports 10/100/1000 Base-T applications • Passive operation – no external power required • Auto-sensing for detecting PoE or non-PoE devices • Sealed and fanless for increased reliability • IEEE802.3af Compliant

4-Channel, end-point, 24VAC

• Transmits power and data to the camera while receiving video from the camera • All-in-one solution: Built-in power supply (1 Amp/channel) to power CCTV cameras • Placed at DVR end

Tel: 886-2-2378-6161

• Extends IP/PoE signal camera over coax cable • Connects IP/PoE camera to 10/100BaseT PoE Injector/Switch over one coax cable. • IEEE802.3af/at Compliant • Supports 10/100 Mbps transmission rate • Power source from PoE Injector/ PoE Switch (order separately)

4-Channel, mid-point 16-Channel, mid-point, rack-mount

• Transmits power and data to the camera while receiving video from EB-P304-01MQ the camera • Placed at mid-point between cameras and DVR • 4-in-1 TVI / CVI / AHD / Analog compatible

EB-C304-01EQ

• • • •

16-Channel active hub

NJ-P101M-PQ

Basic PoE Splitter/Injector

• Sends power over network via Ethernet cable • Not compliant to standard PoE • Supports 10/100 Base-T • Easy plug-and-play

Fax: 886-2-2378-6163

www.enforcer.com.tw

USB Extender DE-S101Q

USB 1.1, Passive, 1 input, 1 output

EVA-F5521-3Q

EVA-M5521-3Q

3ft (0.9m) 2.1mm DC Plug pigtail connector, red/black wire

3ft (0.9m) 2.1mm DC Jack pigtail connector, red/black wire

CA-1615-06LQ

• Extends USB devices over Cat5e/6 cable up to 150ft (46m) • USB 1.1 Compliant • Easily control a DVR remotely without accessing a network or the Internet

4-in-1 HD Video Distributors VA-1102B-WYQ

Illuminated

6” Jack-to-plug connector • LED Indicates power & polarity • DC Jack-to-plug • Patent pending • 2.1mm Patented

Patented

IP surge protector

• Surge protection for IP devices such as IP cameras, IP switches, and computers • RJ45 Connections

Patented

CA-161T

CA-151T

2.1mm DC Plug-to-terminal block

2.1mm DC Jack-to-terminal block

CA-121T

EVA-CB0R1Q

CA-1616Q

Female BNC-to-terminal block

BNC-to-RCA Connector with gold-plated connectors

2.1mm DC Plug-to-plug adapter

CA-161P

CA-151P

CA-1515Q

2.1mm DC Plug-to-terminal block (screwless)

2.1mm DC Jack-to-terminal block (screwless)

2.1mm DC Jack-to-jack adapter

CA-1A1T

CA-1526-1F

X-714-046-18B

1ft 2.1mm DC Jack-to-dual DC plug

Hook-and-loop cable tie

4-in-1 HD Ground Loop Isolator VG-1C12YQ

4-in-1 HD ground loop isolator

• 4-in-1 TVI / CVI / AHD / Analog compatible • Built-in surge protection • BNC Terminals for easy installation • Passive operation - no external power required

VC-3BAQ

1280x1024 Resolution, BNC pass-through

• Converts almost any VGA monitor into a security monitor • 9LGHRLQSXWDXWRFRQ¿JXUH (NTSC or PAL) • OSD (On-Screen Display) for programming • Desktop, VESA, or wall-mountable • Compact size

PoE surge protector

• Surge protection for PoE devices such as PoE cameras and PoE switches • RJ45 Connections • Compatible with IEEE802.3af/at standard

VS-1AHHAQ

Illuminated

3ft (0.9m) Pigtail connector DC Jack • LED Indicates power & polarity • Patent pending • 2.1mm

Male BNC-to-terminal block (screwless)

4-in-1 HD video surge protector

• Surge protection for HD TVI, CVI, AHD, and Analog cameras • BNC Male input, BNC female output

IPV-P188Q

CA-1510-3FLQ

CA-111P

3.5mm Audio Plug-to-terminal block

IPV-PD88Q

3ft (0.9m) Pigtail connector DC Plug • LED Indicates power & polarity • Patent pending • 2.1mm

1 Input, 2 outputs

• 4-in-1 TVI / CVI / AHD / Analog compatible • Distributes single video input to two outputs • Connect to a video camera, multiplexer, DVR, etc.

VS-1V12YQ

Illuminated

CA-1610-3FLQ

HDMI surge protector

• Surge protector for HDMI devices

info@superior-elec.com

LQ+'WR+'0,&RQYHUWHU VC-3YAQ

HD to HDMI Converter

• Converts HD-TVI, CVI, AHD, and CVBS video to HDMI, VGA or composite output • Built-in OSD to display input/output settings • Loop output • Picture in picture display

Tel: 886-2-2378-6161

VC-2VAQ

1024x768 Resolution

• Connect a device with VGA output to an existing monitor with BNC input • Up to 1024x768 VGA input resolution • Composite video output (BNC) plus VGA pass-through • OSD (On-Screen Display) for programming

Fax: 886-2-2378-6163

www.enforcer.com.tw

19

HDMI Extenders RYHU6LQJOH&DWH MVE-AH030Q

HDMI Extender RYHU&RD[

+'0,RYHU:LUH MVE-AH1T1-01YQ Range: Up to 984ft (300m)

Range: Up to 196ft (60m) ®

MVE-AA11-01NQ ®

• HDMI Extender over 2 wires • Supports resolutions from 480i to 1080p with zero signal loss • Transmits up to 984ft (300m) at 1080p over two wires • Plug and play operation – comes as a complete set HDMI Loop output for local HDMI display • Supports up to four (4) receivers for multicast applications • Two (2) 12VDC power supplies included • Bi-directional RS-232 pass-through

• Extends HDMI signals up to 196ft (60m) at 1080p over a single Cat5e/6 cable • Supports resolutions from 480i to 1080p with zero signal loss • Plug and play operation – comes as a complete set • Bi-directional IR for remote control extension • HDMI loop output for local HDMI display • ARC/Digital Audio Out for integration with existing sound systems • EDID management settings • Two (2) 5VDC power supplies included

®

MC-1130-18NQ MC-1130-03FQ MC-1130-06FQ MC-1130-10FQ MC-1130-16FQ MC-1130-25FQ MC-1130-35FQ MC-1130-50FQ

MVE-AH1H1-01GQ Range: Up to 230ft (70m)

• • • • •

4K Support

• Extend HDMI over a single Cat5e/6 cable • Supports resolutions from 480i to 1080p with zero signal loss • Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable • HDMI Loop output for local HDMI display • Plug and play operation – comes as a complete set • IR Pass-through for remote control extension and operation • EDID Management switch • Two (2) 5VDC power supplies included

1.5ft (0.5m), 28AWG 3ft (1m), 28AWG 6ft (1.8m), 28AWG 10ft (3m), 28AWG 16ft (4.8m), 28AWG 25ft (7.6m), 26AWG 35ft (10.6m), 26AWG 50ft (15.2m), 26AWG

3D Support 4K Support Supports Ethernet (100Mb/s) Category 2 cable Lifetime limited warranty

3D

4K

Support Video

Support

LIFETIME LIMITED

WARRANTY

®

• • • •

Supports resolutions from 480i up to 4Kx2K/UHD Plug and play operation – comes as a complete set Bi-directional IR for remote control extension Includes one (1) 24VDC locking power supply – set can be powered at either end

HDMI Extender RYHU,3

4K HDMI Extender RYHU6LQJOH&DWH MVE-AH1E1-41NQ

®

• Extend HDMI and IR signals up to 328ft (100m) over single coax cable • Plug and play operation • Supports up to 1080p resolution • IR Pass-through for remote control extension

4K High-Speed HDMI Cables

HDMI Extenders RYHU6LQJOH&DWH

MVE-AH1E1-01NQ Range: Up to 164ft (50m)

Range: Up to 328ft (100m)

Range: Up to 196ft (60m) ®

MVE-AHMPM-01NQ MVE-AHMPM-01NRQ

MVE-AH1W1-01NQ Range: Up to 656ft (200m)

Tx and Rx kit Receiver

® ®

4K Support

AHMPM-01NRQ MVE-AHMPM-01NRQ MVE-AHMPM-01NTQ

• Supports resolutions from 480i to 4K with zero signal loss • Transmits 4K@30Hz up to 164’ (50m) or 1080p@60Hz up to 196’ (60m) over Cat6 cable • Bi-directional IR for two-way remote control extension • Includes one (1) 12VDC power supply – set can be powered at either end

• Extends 1080p HDMI signals up to 393ft (120m) over a single UTP Cat5e/6 cable MVE-AH1H1-02ZQ • Supports Point-to-Point, Point-to-Many and 0DQ\WR0DQ\QHWZRUNFRQ¿JXUDWLRQ • HDCP compliant • Can be cascaded for many layers by adding more Ethernet switches • With wideband IR (38-56kHz) control to the source • Supports TCP/IP protocol • With mounting ears

• Wirelessly extends HDMI signals up to 656ft (200m) • Active operation ensures that the signal strength will remain strong • Plug and play operation – comes as a complete set with transmitter and receiver, antennas, power supplies, and IR dongles. • Supports resolutions from 480i to 1080p with zero signal loss • IR Pass-through for remote control extension

+'0,WKH+'0,/RJRDQG+LJK'H¿QLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI+'0,/LFHQVLQJ//&LQWKH8QLWHG6WDWHVDQGRWKHUFRXQWULHV

20

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

9*$WR+'0,&RQYHUWHU with Scaler

4K HDMI Splitters MVD-AH12-01Q MVD-AH14-01Q MVD-AH18-01Q

3D

4K

Support Video

Support

2 HDMI Outputs

MVA-VH01Q

4 HDMI Outputs

• Converts VGA+ audio to HDMI • Supports resolutions from 640x480 to 1920x1080 • Plug and play operation

8 HDMI Outputs

• Transmit an HDMI source to up to eight different HDMI displays • EDID Management settings • Supports up to 4K/2K resolution and 3D video • Individual status LEDs for each HDMI output • One (1) 5VDC power supply included • Splitters can be daisy chained up to four levels

HDMI to Composite &RQYHUWHU

Supports up to 1920x1080

MVA-HT01Q ÂŽ

MVD-AH12-01Q

MVA-HV01Q

MVA-TH01Q

MC-2201Q MC-2101Q

5 HDMI Inputs

ÂŽ

Female-to-female 180° Swiveling male-to-female

• For joining two HDMI cables together • Compatible with all 19-pin HDMI cables

ÂŽ

Supports up to 1080p on HDMI output

• Converts composite video and stereo audio to 720p or 1080p HDMI • Supports NTSC, PAL, and SECAM video inputs • Selectable between 720p and 1080p upscaling

4K HDMI Switchers 3 HDMI Inputs

Composite to HDMI &RQYHUWHUZLWK6FDOHU

ÂŽ

MVD-AH18-01Q

MVS-AH31-01NQ MVS-AH51-01NQ

ÂŽ

HDMI to VGA Converter

• Converts HDMI to VGA+Audio • Supports input resolutions up to 1920x1080 • Supports up to 1920x1080 on VGA output • Stereo audio output • Plug and play operation

MVD-AH14-01Q

Supports up to 1920x1080

• Converts HDMI to composite video + stereo audio • Supports input resolutions up to 1920x1080 • Supports NTSC or PAL output • Stereo analog audio output • Plug and play operation

HDMI Surge Protector

ÂŽ

VS-1AHHAQ

HDMI Surge protector

• Surge protector for HDMI devices MC-2201Q

MC-2101Q

MVS-AH51-01NQ MVE-AH1H1-02ZQ

3D

4K

Support Video

Support

MVR-HH01Q MVS-AH31-01NQ

• $GGXSWR¿YH+'0,LQSXWVWRDOPRVWDQ\ KLJKGH¿QLWLRQ79RU+'0,GLVSOD\ • Supports up to 4K/2K resolution and 3D video • Individual status LEDs for each HDMI input • Switch will automatically select the active input for added convenience • Includes remote control for switching between inputs

MVE-PN11-01Q

IR over HDMI Kit ÂŽ

• Add IR remote pass-through to installations where an HDMI source is in a different room than the HDMI display using existing HDMI cables • Discreet, convenient design – adapters install between the devices and the HDMI cables • IR Transmitter and receiver are built with a 4.5ft (1.45m) cord for added convenience while installing

Range: Up to 114ft (35m) ÂŽ

• ([WHQGVKLJKGH¿QLWLRQ video and digital audio up to 114ft (35m) • Supports resolutions from 480i to 1080p

IR Distribution MIR-K16S-2101Q MIR-E-101Q MIR-E-201Q MIR-AS-01Q

IR Distribution Kit Single Emitter Dual Emitter IR Receiver Adaptor

• 12VDC operating voltage • Compatible with 38kHz and 56kHz IR systems • Six 1/8� (3.5mm) IR emitter ports • 10’ (3m) cord for IR emitters and receiver • ,5&RQ¿UPDWLRQ/(' • Status power receptacle with LED indicator • Power receptacle with LED indicator • Can accommodate up to 6 dual IR emitters (for a total of 12 controllable devices) • Kit includes two single IR emitters • IR Receiver can be extended up to 984’ (300m)

MVD-V1201-1Q MVD-V1101-1RQ

1-In, 2-out (1 local, 1 remote) Additional receiver

• Extends VGA signals up to 984ft (300m) at 800x600 resolution over two Cat5e/6 cables • Plug and play operation – comes as a complete set • Supports resolutions from 640x480 to 1920x1200 • Zero signal loss • Two (2) 5VDC power supplies included

3DVVLYH9*$%DOXQExtender RYHU&DWH MVE-SV010Q

Range: Up to 196ft (60m)

• Transmits VGA signals up to 443ft (135m) at 640x480 resolution over a single Cat5e/6 cable • Passive operation – no external power required • Supports resolutions from 640x480 to 1280x1040 • Zero signal loss

+'0,WKH+'0,/RJRDQG+LJK'HÂżQLWLRQ0XOWLPHGLD,QWHUIDFHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI+'0,/LFHQVLQJ//&LQWKH8QLWHG6WDWHVDQGRWKHUFRXQWULHV

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

21

Stand-Alone Security

Wireless Occupancy 1RWL¿FDWLRQ6\VWHP ON-R100-KMF1Q ON-R200-KMF1Q ON-R100-TLQ ON-R100-R1Q ON-R100-R2Q

E-931CS22RFCQ

Fitting room kit

Range: Up to 22ft (7m)

E-931CS22RRCQ

Range: Up to 22ft (7m)

Restroom kit Transmitter 1 Room indicator 2 Room indicator • • • • • • • • •

ON-R100-KMF1Q • 0RQLWRUV¿WWLQJURRPVUHVWURRPVHWF • ,QFUHDVHVVDOHVVDIHW\FXVWRPHUÀRZDQGVDWLVIDFWLRQ • Reduces crowding, theft, and embarrassing situations • Program for PIR sensor (movement) or CdS (light) to detect occupancy • 3URJUDPWRÀDVKDQGEHHSWRDOHUWVWDIIWRFKHFNRQ occupancy • Each Sensor can transmit to an unlimited number of Indicators • Staff and customer can monitor room from a distance • Easy to install - USB or 12VDC • Each kit includes Sensor, 1-Room Indicator, USB cable, and decals • Options: – 1-Room Indicator - Monitor room from different location – 2-Room Indicator - Monitor two rooms UHTXLUHVDGGLWLRQDO2FFXSDQF\1RWL¿FDWLRQ6\VWHP

– Wall-Mount Help Button- Occupant can signal for help – Transmitter- Allows staff to reset Indicator (See Fig. 1)

Monitor a driveway or use as an entrance indicator No wiring necessary between sensor and speaker Wireless range: Up to 328ft (100m)* Sensor pairs with unlimited number of speakers 6SHDNHUFDQSDLUZLWKXSWR¿YHVHQVRUV Sensor is weatherproof for outdoor use Speaker makes chime or alarm sound Alarm output time is adjustable from 3~30 seconds Brackets and accessories available (see page 12)

Parking Alert AS-7021

ON-R200-KMF1Q • 0RQLWRUVUHVWURRPV¿WWLQJURRPVHWF • Offers a sense of privacy - No need to knock • Reduces crowding, theft, and embarrassing situations • Program for PIR sensor (movement) or CdS (light) to detect occupancy • Each Sensor can transmit to an unlimited number of Indicators • Staff and customer can monitor room from a distance • Easy to install- USB or 12VDC • Each kit includes Sensor, 1-Room Indicator, USB cable, and decals • Options: – 1-Room Indicator - Monitor room from different location – 2-Room Indicator - Monitor two rooms UHTXLUHVDGGLWLRQDO2FFXSDQF\1RWL¿FDWLRQ6\VWHP

(See Fig. 2 & Fig. 3)

Parking alert

• • • • • •

Use as an entrance indicator Speaker makes chime or alarm sound Plug-in components – no hard wiring needed 32ft (9m) Cable from speaker to sensor Alarm output time is adjustable from 3~30 seconds Brackets available (see page 12)

Wireless Outlet Controllers LS-313A-14Q 3 Wireless Outlets, 1 Remote LS-525A-14Q 5 Wireless Outlets, 2 Remotes

• Ultrasonic sensor allows precise parking in a garage or parking spot • Adjustable sensing distance • Wall mountable using either double-sided foam tape or screws • 6LPSOHWUDI¿FOLJKWFRORUVLQGLFDWHGLVWDQFH – Green: Vehicle detected – Yellow: Warning – Red: Stop • Battery operated with low-battery indicator (batteries not included)

LS-525A-14Q

• Wirelessly control devices or appliances from up to 100ft (30m)* away • Energy saving - Wireless Outlet draws zero power when off • Easily expand to multiple devices by pairing to different channels or remotes • Combine several kits for further expansion • Control multiple outlets with one button, or one outlet with multiple remotes • For indoor use

Female Bathroom (in use)

Office

Shows which bathrooms are in use

Sensor transmitter

Single channel LED receiver

(LED on)

Fig. 1

2 channel LED receiver

Fig. 2

(LED on)

Male Bathroom (in use)

Office

Office

Lobby

Office

Fig. 3

* Actual range may vary depending on installation and operation environment

22

info@superior-elec.com

Tel: 886-2-2378-6161

Fax: 886-2-2378-6163

www.enforcer.com.tw

E-100LB

SLI ® 762FP-ISS

Entry-Level Alarm

• • • • • • • • • • • • • • • • •

Two four-button RF remotes Flashing parking lights (built-in relay) Patented dual-stage shock sensor Door lock outputs (+/–) Starter-disable output 117dB Single-tone siren Multi-function LED Multi-function pushbutton Domelight supervision Instant triggering with multiple trigger inputs Multiple programming options – Active/passive arming, 0.5/3.5-second door lock/ unlock output, switch sensing, ignition lock/unlock

E-300L

Touchkey Immobilizer

SS-051ME

Dual-Stage Glass-break Sensor

Passive Proximity Immobilizer

• Includes remote microphone with 3ft cable for easy mounting and concealing inside the car. • Dual-stage protection: Chirps siren on light tap of window, triggers alarm on break-in

X-187-037-1SC • Arm/disarm automatically • Two proximity keys included • Two on-board relays for disabling the starter, ignition, or fuel pump • Installer test mode helps determine best position for the sensing coil • Plug-in status LED included • No valet switch needed

Full-Featured Alarm

Dual-stage Electromagnetic Shock Sensor

• Dual-stage protection: Chirps siren if car is lightly tapped, triggers alarm on break-in or vandalism attempts

Use touchkey to disarm alarm Two touchkeys included Attractive backlit receptacle Auto arm/disarm Multi-function LED Valet/override mode

SLI ® 762PP-ISS

SS-052BB

• Heavy-duty automotive relay • SPDT, 12V, 30A/40A

SH-513L E-37EV

Relay

117dB Single-tone siren

Alarm pager system

• Miniature size: 3¼” long, 3¼” diameter • 6~12 VDC Operation • Current draw: 1A@12VDC • • • • • • • • • •

Two 3-button RF remotes Flashing parking lights (built-in relay) Patented dual-stage shock sensor Door lock outputs (+/–) Starter-disable output 117dB Single-tone siren Dome light supervision Multi-function LED Multi-function pushbutton Multiple programming options – Active/passive arming, 0.4/6.4-second door lock/ unlock output, chirp/no chirp, NO/NC trigger input, permanent disarm or automatic rearm, current and/or switch sensing, ignition lock/unlock ON/ OFF, automatic starter disable ON/OFF

info@superior-elec.com

• Monitors up to three zones per premises or vehicle, plus manual paging. • Connect to burglar or communications panels. • Range: Up to 1/2 mile* (0.8km). • Includes belt-clip vibrating receiver (E-37RV).

E-37RV

Vibrating Receiver

• Extra belt-clip vibrating receiver.

E-37ANT • Use as an alternative to AM or CB antenna.

Tel: 886-2-2378-6161

SS-061LSN

Pin Switch Patented

• Patented heavy-duty, long, steel body • 1\ORQ¿EHUJODVVVKDIW • Stainless steel contact terminal

SS-066TL

European-Style Pin Switch

Optional Antenna

• European-style pin switch

Fax: 886-2-2378-6163

www.enforcer.com.tw

23

ORDER PART#AD-CAT-EMCE-SEC 2018_SEC_CondenseCate_180409.indd