Issuu on Google+


2011

Condensed Catalog

Central Receiver SK-910RC4Q

Four relays, one per channel, each 10A@24VDC. Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes. Auxiliary 12VDC relay output (wet contact): 1sec~10min adjustable via built-in potentiometer. Compatible with all SECO-LARM 315MHz transmitters.

5 Relay Outputs 315 MHz

Up to 500ft

*

Up to 500ft

*

315 MHz

SK-910RB2Q

SK-910RBQ

SK-910RBQ

SK-910RA, SK-910RAV

11~24 VAC/VDC, 10A@24VDC relay output. Mini size, 11~24 VAC/VDC, 3A relay output.

SK-910RAV

Mini size, 3~13.8 VDC, 5A transistor ground output. Control garage doors, house lights, etc. Output is programmable for 4sec momentary (default), 1sec momentary, toggle, or validity. (SK-910RBQ also features a latching mode.) LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.

SK-910RB2Q

*

Same as SK-910R4Q, but 433.92MHz.

Extended Range Antenna SK-91ERSD

Extends the range of SECO-LARM RF receivers. Plugs into the receiver.

4-Button Transmitters

SK-917TP4J-NU

Leather pouch for SK-919TD1S-UP & SK-919TT1S-BU.

Same as SK-919TD2A-UP, but 433.92MHz.

Up to 500ft

*

CODEBUMP™ codehopping technology, 18 quintillion codes.

LED transmission indicator.

SK-939TS4J-NU

12VDC Battery for all transmitters except handheld.

Same as SK-919TP4J-NU, but 433.92MHz.

SK-919TP1H-BU --- 1 Button, 1 Channel SK-919TP2H-NU --- 2 Buttons, 3 Channels SK-919TP4H-NU --- 4 Buttons, 15 Channels

~~~~

315 MHz

External or internal battery power. External or internal triggering. Use to make almost any security output wireless. Other specifications similar to SK-919TD1S-UP.

315 MHz Factory pre-coded. Over 68 billion possible codes.

Slimline Handheld Transmitters

Make push-to-exit plate or keypad wireless.

Up to 500ft

315 MHz Up to 1,000ft (300m) range max.

CODEBUMP™ codehopping technology, 18 quintillion codes.

SK-915BA

Sample Application:

2

SK-919TP4J-NU

Wired 1-Button Transmitter

Up to 500ft

SK-939TS2A-PQ

SK-915LP

315 MHz

SK-917T2A-U

Same as SK-919TT1S-BU, but 433.92MHz.

SK-910R4-4Q

Uncoded. Over 68 billion possible codes.

SK-919TD2A-U

SK-939TS1S-B

SK-919TDWS-BU

Control garage doors, house lights, etc. Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes. Four LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.

Similar to SK-910RB2Q, but 433.92MHz.

Factory pre-coded. Over 68 billion possible codes.

DIP switch coding. Over 68 billion possible codes. LED transmission indicator.

*

11~24 VAC/VDC, 4 x 10A@24VDC relay outputs.

SK-910RAV2

SK-919TD2A-UP

*

Up to 500ft

SK-910R4Q

2-Button Transmitters

SK-919TT1S-BU

315 MHz

SK-910R2-4Q

1-Button Transmitters Factory pre-coded.

*

SK-910RAV2

Similar to SK-910RBQ, but 433.92MHz.

Up to 500ft

Up to 500ft

11~24 VAC/VDC, 2 x 10A@24VDC relay outputs.

SK-910R-4Q

315 MHz

See Page 3 for additional information regarding the above products.

4-Channel Receivers

Mini size, 3~13.8 VDC, 2 x 3A transistor ground outputs. Each output independently configurable (SK-910RB2Q only). Outputs are programmable for 4sec momentary (default), 1sec momentary, toggle, or validity. (SK-910RB2Q also features a latching mode.) Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.

SK-910RA

SK-919TD1S-UP

2-Channel Receivers

1-Channel Receivers 315 MHz

Optional central receiver accessories include: Weatherproof transmitter (SK-919TPWFEUQ). Wireless magnetic contacts (SM-93T19Q). Wireless PIR sensor (E-9908-1T19Q).

315 MHz

Extreme durability ¯ Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter. Includes two 3VDC lithium batteries and visor clip. 1 3 1 Slimline design: 3 /2”x2 /16”x /2” (89x56x12 mm).

Up to 500ft

*

SK-9HBC

Belt-clip holster for slimline handheld transmitters.

X-930-089

3VDC Lithium battery for handheld transmitters.

*Actual range may vary greatly depending on the installation and operating environment.

Battery

Belt-Clip Holster

*


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Central Receiver Accessories SK-919TPWFEUQ

Weatherproof Transmitter Similar to the SK-919TDWS-BU. With terminal blocks. Weatherproof IP65. Indoor/outdoor use.

315 MHz Up to 500ft

SM-93T19Q

Wireless Magnetic Contacts Weatherproof IP66. Indoor/outdoor use.

PS-U0405-PUQ

EVP-224A4-P9Q 9 Outputs, 24VAC; 4A Supply Current

EVP-224A8P16Q

Blade-Style or PTC Fuses Available!

16 Outputs, 24VAC; 8A Supply Current

4 Outputs, 12VDC; 2A Supply Current

9 Outputs, 12VDC; 4A Supply Current

EVP-224D6P16Q 16 Outputs, 12VDC; 6A Supply Current

SK-919TP2D-P

2-Button Desktop Transmitter

SK-919TP2D-F

2-Button Footswitch Transmitter 315 MHz

For remote activation of locks, cameras, etc. from a desk or other location. Up to Use in offices, factories, etc. 500ft Portable, attractive, heavy-duty aluminum case. Includes rechargeable battery and power adapter. Compatible with all SECO-LARM 315MHz receivers.

*

Rack-Mount Brackets EVP-RMB-AQ

EVP-224D4-P9Q (Shown)

120VAC CCTV Power Supplies 4 Outputs, 24VAC; 4A Supply Current

EVP-1SA4P9UL 9 Outputs, 24VAC; 4A Supply Current

EVP-1SA8P16UL

12VDC/24VAC CCTV Power Supply 16-Output CCTV Power Supply, 6A Continuous

18 Outputs, 6A Continuous, PTC Fuse

Switched mode provides greater efficiency. Reduced heat extends the life of your power supply. Lightweight. Ultra-low ripple voltage for improved image quality. Output fuses rated 2.5 Amp for PTC.

Rack-Mount CCTV Power Supplies PH-A1612-GUQ

16-CH, 12A Continuous, Glass Fuses

PH-A1612-PUQ

16-CH, 12A Continuous, PTC Fuses

PH-A3224-GUQ PH-A3224-PUQ

32-CH, 24A Continuous, PTC Fuses

EVP-1SD6P16UL

Field-selectable 24 or 28 VAC outputs, or OFF. Output fuses rated at 3 Amp per channel. Glass fuses conveniently accessible from the front panel (PH-A1612-GUQ and PH-A3224-GUQ). Dual-color LED status indicator for each output (Blue --- normal, Red --- fault, OFF --- not in use). Removable terminal blocks for easy wiring. Rack, wall or desk (stackable) mountable. Built-in surge protection. Dimensions (excluding bracket): 13/4”x171/2”x113/8” (44x445x289 mm).

Blade-Style or PTC Fuses Available!

16 Outputs, 24VAC; 8A Supply Current

9 Outputs, 12VDC; 4A Supply Current

Power Distribution Boards (See Pg. 16)

PS-U1806-PUQ

EVP-1SA4P4UL

EVP-1SD4P9UL

For large CCTV power supply case.

9 Outputs, 6A Continuous, PTC Fuse

32-CH, 24A Continuous, Glass Fuses

4 Outputs, 12VDC; 2A Supply Current

EVP-RMB-BQ

PS-U0906-PUQ

EVP-1SD2P4UL

For small CCTV power supply case.

4 Outputs, 5A Continuous, PTC Fuse

240VAC input , AC or DC output models available. Individually protected PTC-type fused outputs. Output voltage adjustable to compensate for voltage drop. Individual status LED indicator. Main power switch with surge protection. DC models are adjustable from 5.6~8.15 VDC or 12.6~15.15 VDC.

RF Wireless Controls

Individual status LEDs. Individually protected PTC-type fused outputs. 8 Outputs are 12VDC. 8 Outputs are 24VAC. Extra-large enclosure.

EVP-224A4-P4Q

EVP-224D4-P9Q

Wireless PIR Sensor 20ft Sensing range. Pet immunity.

EVP-124M6P16Q

Switching CCTV Power Supplies

EVP-224D2-P4Q

E-9908-1T19Q

240VAC CCTV Power Supplies 4 Outputs, 24VAC; 4A Supply Current

*

www.enforcer.com.tw

EVP-1SA4P9UL (Shown)

16 Outputs, 12VDC; 6A Supply Current

120VAC input , AC or DC output models available. Individually protected PTC-type fused outputs. Individual status LED indicator. Main power switch with surge protection. Includes enclosure, 6-foot power cord, and transformer. DC models are adjustable from 5.6~8.15 VDC or 12.6~15.15 VDC.

High-Amp DC Power Supplies PS-D1610-BUQ

16 Outputs, 9A Continuous, Blade-Style Fuses

PS-D1610-PUQ

16 Outputs, 9A Continuous, PTC-Style Fuses

Individual red status LEDs for each output. Output fuses rated 3A@250VAC. Output adjustable to compensate for voltage drop. Main power switch with surge protection. Maximum 9 Amp continuous output current.

*Actual range may vary greatly depending on the installation and operating environment.

3


2011

Series

atherproo

IP66use utdoor

1/3” Sony Super HAD CCD. 2.8~12mm Lens. 540TVL. Dual voltage: 12VDC/24VAC. Digital Noise Reduction. OSD (On-Screen Display). 360° 3-Axis gimbal. Digital Wide Dynamic Range for specific light conditions. 33 IR LEDs. Gray base with interchangeable black and white covers included.

atherproo

IP66use utdoor

EV-2845-N2EQ (NTSC) EV-2845-P2EQ (PAL) Ultra small size. atherproo We 2.3mm Lens. forIP66 se outdoor u 580 TV Lines. Housing can be surface or flush mounted. Built-in DSS and DNR deliver superior nighttime performance.

f

360° 3-Axis rotation. Dual voltage: 12VDC or 24VAC. Easy adjustment of zoom and focus.

We

for o

f

EV-2806-NMMQ (NTSC) EV-2806-PMMQ (PAL)

We

for o

f

Series

Wide-Angle Mini Dome Camera

Vandal Varifocal Domes

DNR/DWDR/IR Vandal Dome Camera

EV-2636-NKEQ (NTSC) EV-2636-PKEQ (PAL)

True Day/Night Operation. 1/3” Sony Super HAD CCD. 600 TV Lines. IR cut filter. 2.8~10.5mm F1.2 Tamron lens. Flush or surface mount. Service monitor port for convenient installation. OSD (On-Screen Display) with remote. Advanced 256x DSS (Digital Slow Shutter). DNR (Digital Noise Reduction).

Indoor 3-Axis Varifocal Domes (550TVL) EV-2660-NKBQ (NTSC) EV-2660-PKBQ (PAL)

Armored Ball Turret Cameras We

EV-2646-NKGQ (NTSC) EV-2646-PKGQ (PAL)

atherproo

IP65use

for o

EV-2625-NKEQ (NTSC) EV-2625-PKEQ (PAL)

f

Series

utdoor

2.8~12mm Lens

EV-2656-NKGQ (NTSC) EV-2656-PKGQ (PAL)

Wide Dynamic Range. 540 TV Lines. 2.8~11mm Varifocal lens. OSD & included remote control.

Ceiling and wall brackets available for the two cameras above.

Condensed Catalog

1/3” Sony Super HAD CCD. 2.8~10.5mm Tamron F1.2 Varifocal lens. 12VDC. Service monitor port.

EV-2660-NKBAQ (NTSC) EV-2660-PKBAQ (PAL) Same as EV-2660-NKBQ, but with:

CDS Auto Switch True Day/Night and IR cut filter. Dual voltage: 12VDC/24VAC.

2.8~12mm Lens with 3DNR

1/3” Sony Super HAD CCD. 550 TV Lines. DNR (Digital Noise Reduction) for clear image in low light. 42 IR LEDs. EV-2656-NKGQ incorporates OSD (On-Screen Display) for easy programming and DWDR (Digital Wide Dynamic Range) for clear images under strong backlighting. Advanced 256x DSS (Digital Slow Shutter).

4

EV-2661-NKBQ (NTSC) EV-2661-PKBQ (PAL)

Same as EV-2660-NKBAQ, but with:

36 IR LEDs.

Note: Model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS-compliant products.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

DNR IR Bullet Cameras

EV-4605-N2SQ (NTSC) EV-4605-P2SQ (PAL)

Series

EV-1636-NLGQ (NTSC) EV-1636-PLGQ (PAL)

EV-1626-NKGQ (NTSC) EV-1626-PKGQ (PAL)

EV-1636-NWGQ (NTSC) EV-1636-PWGQ (PAL)

EV-1626-NWGQ (NTSC) EV-1626-PWGQ (PAL)

2.3mm Lens

EV-4606-N2SBQ (NTSC) EV-4606-P2SBQ (PAL)

2.8~12mm, 14 IR LEDs

3.5~16mm, 42 IR LEDs

2.3mm Lens, 30 LEDs

6~50mm, 14 IR LEDs

6~50mm, 60 IR LEDs

atherproo

IP66use

f

We

atherproo

f

IP66use

utdoor

for o

utdoor

1/3” Sony Super HAD II CCD. 550 TV Lines. 2.3mm Lens, 160° viewing angle. EV-4606-N2SBQ is similar to EV-4605-N2SQ, but includes 30 IR LEDs.

1/3” Sony Super HAD CCD. 550 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x Digital Slow Shutter. OSD (On-Screen Display) for easy programming. DWDR (Digital Wide Dynamic Range) for clear images under strong backlighting. DNR (Digital Noise Reduction) for clear images in low light. Cable concealed in the bracket for extra security. Low current draw (310mA with IR LEDs on). 14 IR LEDs for clear images in total darkness.

We

atherproo

IP66use

for o

f

We

for o

Corner-Mount Cameras

Mini DNR/DWDR/IR Cameras

Series

www.enforcer.com.tw

utdoor

1/3” Sony Super HAD CCD. Third-generation DSP chip. 600 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x DSS (Digital Slow Shutter). OSD (On-Screen Display) for easy programming. DNR (Digital Noise Reduction) for clear images in low light. Programmable 8-zone privacy settings. Cable concealed in the bracket for extra security. IR LEDs for clear images in total darkness.

Bullet Camera

EV-5105-N3SQ (NTSC) EV-5105-P3SQ (PAL)

EV-1324C12 (NTSC) EV-1354C12 (PAL) 1/4” Sharp CCD. 3.6mm Lens. 380 TV Lines.

Surveillance-Mirror Camera

Single-gang wall plate

EV-5145-N3SQ (NTSC) EV-5145-P3SQ (PAL) Slimline wall plate

atherproo We

f

IP66use

for o

EV-6100-N2SQ (NTSC) EV-6100-P2SQ (PAL)

Discreet Wall-Plate Camera

utdoor

EV-5165-N3SQ (NTSC) EV-5165-P3SQ (PAL) European wall plate

1/3” Sony Super HAD CCD. 550 TV Lines. 3.6mm Lens. Rugged, heavy-duty design suitable for industrial applications.

Camera is mounted behind a one-way observational mirror, combining two forms of visual protection. 1/3” Sony Super HAD CCD. 420 TV Lines. 2.9mm Lens. 12VDC Operation.

Wide-Angle Bullet Camera EV-1665-N2BQ (NTSC) EV-1665-P2BQ (PAL)

We

atherproo

IP66use

for o

f

1/3” Sony Super HAD II CCD. 2.2mm Lens (170° viewing angle). 550 TV Lines.

utdoor

5


2011 BNC to VGA Converters VC-1BAQ

Converts almost any LCD monitor into a security monitor. NTSC or PAL input. Video input auto-configure. On-screen display (OSD) functions: color, contrast, tint, and brightness. Desktop or wall mountable. Compact size, perfect for plug-and-play installation. Input connector: BNC. Output connector: VGA (DB15 VGA connector). 5VDC Power adapter included. Output: NTSC: 640x480, PAL: 768x576.

PCI Balun Hub Cards EVT-PC4-VT2Q

4-Port Video Balun Card Connects up to four CCTV cameras (per PCI card) to a central location using low-cost Cat5e/6 UTP cable. Range: Up to 2,000ft (610m).

VGA to BNC Converter VC-2VAQ

Converts a VGA signal to composite video for viewing on any monitor or TV with a composite input.

VGA input resolution: Up to 1024x768. (DB15). Ouput: Composite video (BNC connector), plus VGA pass-through (DB15).

EVT-PC8P-JTQ

Same as EVT-PC4P-JTQ, but with eight ports and 6 Amp adapter.

Passive Video, Power, Data (VPD) Baluns EVT-PB1-31RQ

Transmits a monochrome video signal up to 2,000ft (610m) or color up to 1,300ft (400m). Video, power, and data over Cat5e/6. Built-in multi-color LED indicates AC or DC power and polarity. Removable terminal blocks.

EVT-PB1-318Q

Same as EVT-PB1-31RQ, but with RJ-45 jack instead of terminal block.

USB Over Cat5e/6 (Passive) DE-S101Q

Extend keyboard, mouse, camera or any USB devices over Cat5/ Cat5e/ Cat6. USB 1.1 compliant. Up to 150ft (50m) range, or further with low-power devices. Small size, only 21/2”x17/16”x7/8” (64x37x22 mm) excluding 9” (230mm) USB connection.

6

EVT-PB1-L05Q

2,000ft (610m) Video range. Built-in power converter similar to ST-LA105-TTQ (see page 14). Built-in dual-color LED indicates power & polarity. Built-in DC-plug power connector & data wire.

Same as EVT-PC4-VT2Q, but with eight ports.

4-Port Power-Distribution Card Optional power distribution card. Includes a 12VDC, 4 Amp power adapter.

Similar to VC-1BAQ, but with: High resolution, up to 1280x1024 NTSC. BNC Pass-through output. Stores settings in case of power loss. Smaller size.

Passive VPD Baluns w/ Voltage Converter

EVT-PC8-VTDQ

EVT-PC4P-JTQ

VC-3BAQ

Condensed Catalog

EVT-PB1-31RGQ

Same as EVT-PB1-31RQ, but with a built-in ground loop isolator.

EVT-PB1-L05AQ

Similar to EVT-PB1-L05Q, but with RJ-45 jack instead of terminal block.

Passive VPD Baluns w/ Voltage Booster EVT-PB1-H05Q 2,000ft (610m) Video range. Built-in voltage booster specs similar to ST-HB105-TTQ (see page 14). Compensates for DC voltage drops over long cable runs. Input voltage: 7~24 VDC. Output voltage: 12 or 24 VDC (jumper selectable). Vernier adjustment for each voltage. Output current: 500mA@12/24 VDC. Built-in dual-color LED indicates power and polarity. Built-in DC-plug power connector, data wire, and BNC connector.

EVT-PB1-H05AQ Similar to EVT-PB1-H05Q, but with RJ-45 jack instead of terminal block.

VGA Baluns Extend VGA range to 984ft (300m) over one Cat5e/6 cable. For our full line of VGA baluns, please see pg. 17.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Passive Video Baluns

Video Amplifiers VA-2101B-WQ VA-2404B-WQ

EVT-PB1Q Gold-plated BNC connector. Screwless terminal block for easy installation. Transmits up to: 2,000ft (610m) B/W, 1,300ft (400m) color.

EVT-PBP-V1TQ

6” BNC Pigtail connector. Gold-plated BNC connector. Screw terminals for reliable installation. Transmits up to: 2,000ft (610m) B/W, 1,300ft (400m) color.

Video Distributors

EVT-PB1-V1TSQ

Built-in surge protection. Gold-plated BNC connector. Screw terminals for reliable installation. Transmits up to: 2,000ft (610m) B/W, 1,300ft (400m) color.

VA-1102B-WQ VA-1104B-WQ

Distributes single video input to multiple video outputs. Compatible with color or black/white signals. Transmits up to 984ft (300m). NTSC or PAL compatible. Connect to video camera, multiplexer, VCR, DVR, etc. Voltage: 12VDC or 24VAC. Power adapter included. Power loop-out (VA-1102B-WQ only). Gold-plated BNC connectors.

Gold-plated BNC connector. Built-in ground loop isolation. Removable terminal block. Built-in surge protection. Transmits color signal up to 984ft (300m).

Ground Loop Isolator

Male gold-plated BNC, fits a 9 /16"x5/8" hole in a single-gang plate. Transmits up to 2,000ft (610m). RJ-45 Connection.

VG-1C12AQ Gold-plated BNC connector. Passive operation --- No external power required. High immunity to interference --- Built-in impedance-coupled device and noise filter. BNC terminals for easy installation.

EVT-PBM-V27Q

EVT-PH16-4T2Q 16-Port Passive Balun Hub

Connect up to 16 CCTV cameras to a central location using low-cost Cat5e/6 UTP cable. Works with all SECO-LARM baluns. 3 Compact enclosure, only 1U (1 /4”, 44mm) high. Mounts in a standard 19” rack, or stackable. Built-in transient surge protection and interference technology for existing UTP cables. Gold-plated BNC connectors. Transmits up to: 2,000ft (610m) B/W, 1,300ft (400m) color.

Rack-Mount Active Balun Hub EVT-AH16-VT2Q 16-Port Active Balun Hub

Rack mount or stackable. Compact enclosure, only 1U (13/4”, 44mm) high. Video in: 16 (terminal blocks). Video out: 32 (BNC connectors). Power input: 12~24 VDC/VAC. Current draw: 500mA. Built-in video and data surge protection. Perfect for use with DVRs. Transmits up to: 3,000ft (914m) w/ Passive Balun, 1.5mi (2.4km) w/ Active TX.

Female gold-plated BNC, fits a 9 /16"x5/8" hole in a single-gang plate. Transmits up to 2,000ft (610m). RJ-45 Connection.

Active Video Baluns EVT-TB1-42TQ

RS-232 to RS-485 Converter EVA-RS1

Active Video Balun Transmitter Up to 1.5mi (2.4km) with active receiver. Video, data, and surge protection. Interlockable.

Connects up to 32 devices. Range: Up to 3,937ft (1,200m).

4-Port Passive Video Hub

EVT-RB1-4T2Q

EVT-PH4-V2WOQ

Active Video Balun Receiver Up to 1.5mi (2.4km) with active transmitter. Video, data, and surge protection. Interlockable.

EVT-AB1Q

Active Video Balun Set Includes EVT-TB1-42TQ transmitter and EVT-RB1-4T2Q receiver.

Rack-Mount Passive Balun Hub

EVT-PBM-V17Q

1 Input, 4 Outputs

Snap-In Passive Video Baluns

1 Input, 2 Outputs

EVT-PB1-V1TGQ

1 Input, 1 Output

4 Inputs, 4 Outputs Video amplifier compensates for video loss. Brightness and sharpness adjustments for each channel. NTSC or PAL compatible. Transmits up to 3,280ft (1,000m). LED to indicate power. 12VDC Power adapter included. Power loop-through to power nearby devices.

www.enforcer.com.tw

Patent pending

Connects up to four CCTV cameras to a central location using low-cost Cat5e/6 UTP cable. Works with full-motion CCTV cameras up to 2,000ft (610m) away via passive video baluns. RJ-45 or screwless terminal block output.

Data Distributors RD-304-D1Q Output: Four (4) RS-485 connectors. Range: Up to 3,937ft (1,200m). Connect up to 64 cameras or devices via RS-485.

RD-316-R1Q

RD-304-D1Q

Output: Sixteen (16) RS-485 connectors. Range: Up to 3,937ft (1,200m). Connect up to 256 cameras or devices via RS-485. 12VDC Power adapter (included). Built-in surge protection and signal isolation. Dual-colored LED: Red --- RS-485 activity, Blue --- Power ON. Rack or wall mountable. 3 Compact enclosure, only 1U (1 /4”, 44mm) high.

RD-316-R1Q

7


2011 Snap-In DC Connectors

DC Pigtail Connectors EVA-F5521-3Q

DC Plug, pigtail connector, 3ft.

DC Jack, pigtail connector, 3ft.

EVA-M5521-3Q

CCTV Accessories

Black/Red Wires

CA-161T-02SQ

DC Plug-to-terminal block, 21/2” (64mm) wire.

Condensed Catalog

600-lb Single-Door Maglocks E-941SA-600Q

600-lb Holding Force.

E-941SA-600PQ CA-151T-02SQ

DC Jack-to-terminal block, 2 / ” (64mm) wire. 12

600-lb Holding Force. Bond Sensor, LED.

CA-161T

DC Plug-to-terminal block.

CA-151R

DC Jack-to-terminal block.

EVA-CB0R1Q

BNC-to-RCA connector. Gold-plated connectors.

EVA-WB0B1-08Q

6” (15cm) Male-to-female BNC connector. Gold-plated BNC connector.

Snap-In DC Connectors with LED

CA-161T-02SLQ*

DC Plug-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.

CA-151T-02SLQ*

DC Jack-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.

1,200-lb Single-Door Maglocks

CA-171T-02Q

RJ-45 Male-to-terminal block with 2” (5cm) cable.

CA-1616Q

DC Plug-to-plug adapter.

Illuminated Power Connectors

DC Jack-to-jack adapter.

1,200-lb Holding Force. 1,200-lb Holding Force, Bond Sensor, LED.

DC Male plug, 3ft (0.9m) wire. LED indicates power and polarity.

E-941SA1K2PDQ

1,200-lb Holding Force, Bond Sensor, LED, Timer.

CA-1510-3FLQ*

E-941SA-1200Q E-941SA-1K2PQ

CA-1610-3FLQ*

CA-1515Q

Anodized aluminum housing (US 28). 12 or 24VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to show locking status (E-941SA-600PQ only).

DC Female jack, 3ft (0.9m) wire. LED indicates power and polarity.

CA-1526-1FQ

DC Jack-to-double DC plug, 1ft wires.

CA-1615-06LQ*

DC Jack-to-plug, 6” (152mm) wire. LED indicates power and polarity.

*Patent pending

8

Anodized aluminum housing (US 28). 12 or 24 VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to show locking status (E-941SA-1K2PQ and E-941SA-1K2PD only).

X-714-046-18B

Hook-and-loop cable tie. Organize loose cables.

*U.S.A. and international patents pending.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Double-Door Maglocks E-941DA-1K2Q Double-door, 1,200-lb.

E-941DA-1K2PQ Double-door 1,200-lb, Bond Sensor, LED.

Access Control Power Supply EAP-5D1Q --- 12 or 24 VDC Supply Current: 5A@12VDC / 4.5A@24VDC AC Power failure supervision relay with delay timer: 5 seconds, 5 minutes, 5 hours. LED overload indicator and automatic shutdown for short-circuit protection. Over-current fuse-protected AC input. Automatically switch to backup battery if AC fails. Individual AC input and DC output LED status indicators.

www.enforcer.com.tw

Maglock Mounting Brackets “Z” Brackets E-941S-600/ZQ

(for 600-lb series locks)

E-941S-1K2/ZQ

(for 1,200-lb series locks)

EAP-5D5Q 12 or 24 VDC 1,200-lb Holding force for each door. 12 or 24 VDC (selectable). Status-sensing relay output and dual-color status LED (green: locked, red: unlocked). Anodized aluminum (US 28). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy mounting. Detachable faceplate.

E-941DA-600Q Double-Door, 600-lb.

E-941DA-600PQ Double-Door, 600-lb, Bond Sensor, LED.

Similar to E-941DA-1K2Q and E-941DA-1K2P, but 600-lb holding force per door.

80-lb Electromagnetic Lock E-941SA-80Q For small, low-security drawers or cabinets. Holding force: 80-lb (36kg) @ 12VDC 110-lb (51kg) @ 24VDC. 12 or 24 VDC.

Gate Lock Mounting Brackets “Z” Brackets

E-942F-1K3/ZQ (for E-942FC-1K3Q)

Same as EAP-5D1Q but includes a 5-output power distribution module.

PD-5PAQ 5-Output Power Distribution Board (see pg. 16).

EAP-5D1MQ

Same power-supply board used in EAP-5D1Q.

400-lb Electromagnetic Locks E-941SA-400Q For indoor and outdoor applications. Weatherproof. 3ft (0.9m) Hookup wire included. Input voltage — 12 or 24 VDC.

Electromagnetic Gate Locks E-942FC-1K3Q Ideal for sliding or swinging gates. Holding force: 1,300-lb (591kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 1 6 /2 ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.

E-942FC-800AQ “L” Brackets E-942F-1K3/LQ (for E-942FC-1K3Q)

Batteries not included

For sliding or swinging gates. Holding force: 800-lb (400kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 1 6 /2ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.

“L” Brackets E-941S-600/LQ

(for 600-lb series locks)

E-941S-1K2/LQ

(for 1,200-lb series locks)

“U” (glass door) Brackets E-941S-600/UQ (for 600-lb series locks)

E-941S-1K2/UQ

(for 1,200-lb series locks)

Plate Spacers E-941S-600/PQ

(3/16” for 600-lb series)

E-941S-1K2/PQ

(1/4” for 1,200-lb series)

E-941D-600/PQ

(for 600-lb double-door)

E-941D-1K2/PQ

(for 1,200-lb double-door)

Armature Plate Holder E-941S-600/HQ (for 600-lb series)

E-941S-1K2/HQ (for 1,200-lb series)

9


2011 Electric Door Strikes SD-991A-E1Q

Fail-Secure (Door locked with power disconnected)

SD-991B-E1Q

Fail-Safe (Door unlocked with power disconnected)

Electric Deadbolts

Condensed Catalog Electric Door Strikes

SK-990AQ Fail-secure

SD-997BQ

Power-off locking. Power unlocking. For entrance doors.

Fail-safe operation

SK-990BQ Fail-safe

Power locking. Power-off unlocking. For concealed mounting. 5 /8” (17mm) Bolt extension. Fail-safe operation. 12VDC Input. Narrow design: 77/8"x15/16" (200x32 mm). Door-position monitoring output (NO/NC/COM).

For use in wood doors. Connect to optional keypads including SECO-LARM’s SK-1011-SQ or SK-1131-SQ. Baked painted finish.

SD-997A-DQ Fail-secure operation

Convert mortise lock sets to electronic access control locking systems. Use on virtually any mortise door locking system. Use with an optional digital keypad such as SECO-LARM,s SK-1011-SQ or SK-1131-SQ for keyless high security. Reversible for right-hand or left-hand doors. Shallow design for use with most doors. Stainless steel lip (keeper) for strength and long life. Non-polarized connection. Wires can be reversed. Fail-Secure (SD-991A-E1Q) units are perfect for entrance door installations. Fail-Safe (SD-991B-E1Q) units are perfect for emergency door and escape door installations. Suitable for office-type applications.

Universal Door Strike SD-996CM-NUAQ

Similar to SD-997BQ, but fail-secure (locks when power disconnected). Incorporates manual lock/unlock cylinder to operate the SD-997A-DQ if power is lost.

Lock knob

Rim-Type Exit Devices SD-962AR-36A Manual lock/unlock cylinder

SD-997SMB-AQ* Surface-mount bracket set for SD-997BQ.

For exit doors -- Allows exit from inside while locked from outside. Reversible non-handed design. For metal or wood doors. 3 Stainless-steel /4" (19mm) throw-latch bolt. Deadlocking latch. Can be unlocked for extended periods of time. Fits doors from 30"~48" (0.7~1.2m) wide. Heavy-duty, steel construction.

SD-997UB-AQ*

“U” Bracket for SD-997BQ for glass doors. *Use with SD-997SMB-AQ only.

Electric Door Strikes Includes 2 faceplates

SD-995AQ

For wood doors, Fail-secure, 12VDC

SD-995BQ Field selectable for fail-safe or fail-secure operation. Field selectable dual-voltage 12/24 VDC. Powered by a solenoid. Reversible non-handed design fits either right-hand or left-hand doors. Low profile: Strike is only 11/4” (32mm) deep for use with hollow aluminum frames. Includes 2 faceplates for nearly any type of door: *Aluminum - 124L x 32W x 2.5T mm *Stainless steel - 202L x 32W x 2.5T mm

10

Door Closer

For wood doors, Fail-safe, 12VDC

SD-C141S

Shallow design for use with most doors. Powered by a solenoid, not a buzzer coil. Stainless steel lip (keeper) for strength and long life. Fail-Secure (SD-995AQ) units are perfect for entrance door installations. Fail-Safe (SD-995BQ/SD-995B-24Q) units are perfect for emergency door and escape door installations.

Surface-type door closer. Non-handed operation. Separate adjustment of both closing and latch speeds.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Indoor No-Touch Sensors SD-927PKC-NEQ

No Touch --- Just wave a hand in front of the sensor. Sensing range up to 4" (10cm). Attractive "ring" illuminator turns from red to green on sensor activation. Reduces risk of cross contamination. Reliable IR technology senses motion.

SD-927PKC-NSQ

Same as SD-927PKC-NEQ, but in Spanish.

SD-927PKC-NFQ

Same as SD-927PKC-NEQ, but in French.

SD-927PWCQ

Same as SD-927PKC-NEQ, but with white plate and white body. Includes decals in English, Spanish, and French.

Single-gang No-Touch sensor. Adjustable sensing range and delay time. Mechanical override button.

SK-1011-SQ

SK-2323-SDQ

One output: Form C relay output (5A@28VDC). 100 Unique 4~8 digit codes. Stainless-steel faceplate. Easily delete individual codes. Programmable wrong-code lockout. Programmable output relay activation buzzer. Relay output inhibit control. Auto or manual-code entry checking. Egress input. Built-in tamper (N.C.) circuit. EEPROM memory: Prevents data loss. Power: 12~24 VAC/VDC. Backbox included. Limited lifetime warranty.

Mullion-Style Keypad

Same as SD-9263-KSVQ, but slimline.

Same as SD-9263-KSVQ, but no mechanical override button.

Same as SD-9263-KSQ, but in Spanish.

SD-9163-KS1Q

Same as SD-9263-KS1Q, but slimline.

SD-9263-KS2Q

Same as SD-9263-KSQ, but in French.

SD-9163-KS2Q

Same as SD-9263-KS2Q, but slimline.

Similar to SK-2323-SDQ, but with proximity reader. Three programmable access modes --- proximity card only, proximity card or user code access, or combined proximity card with user code access. Compatible with all SECO-LARM proximity cards.

Three outputs: (Keys are backlit) - Main relay: Form C, 5A@28VDC. - Aux. relay: Form C, 1A@28VDC. - Transistor ground output (100mA@24VDC). 120 Unique 4~8 digit codes. Backlit keyboard is easy to use at night. Three LEDs can be wired as needed. Door-propped-open warning. Alarm output, mantrap, and door auto-relock features, plus much more. Backbox included. Limited lifetime warranty.

PR-112S-A

10 Cards included. Sealed and weatherproof (IP67). Mounts easily to interior or exterior walls. Up to 100 users. Output relay for timed (1~180 sec) or latch mode. Egress input for simple exiting of protected area. Tri-color wave-shaped LED status bar indicates proximity reader’s mode and status. Blue : On/Valid Card indicator. atherproo We Green: Programming Mode. forIP67 se outdoor u Invalid Card. Red:

f

SD-9263-KS1Q

Mullion-Style Keypad with Built-in Proximity Reader

Stand-Alone Proximity Reader

SD-9163-KSQ

Same as SD-9263-KSQ, but slimline.

SK-2323-SPQ

Similar to SK-1011-SQ, but with: 120 user codes, three outputs, backlit keys, mantrap, alarm output, door- forced-open warning, duress output, door auto relock, and other advanced features.

SD-9263-KSQ

1,010 Users. 12~15 VDC operation. Two Form C relay outputs. Each relay has programmable output time from 1~99 seconds or toggle. Rugged, weatherproof (IP65) design. Backlit keys for easy nighttime use. Two egress inputs. SK-2323-SPQ Shown Door sensor input. Built-in tamper sensor. All features are programmed from the keypad. Circuitry is potted with epoxy for outdoor use.

SK-1131-SQ

SD-9163-KSVQ

Outdoor Access Control Keypads

Indoor Access Control Keypads

Outdoor No-Touch Sensors SD-9263-KSVQ

www.enforcer.com.tw

Proximity Cards and Keyfobs PR-K1S1-A

Additional cards sold in packs of 10. EM-125.

PR-K1K1-AQ

Proximity keyfobs. Sold in packs of 10. EM-125.

PR-K1S1-A and PR-K1K1-AQ are compatible with all SECO-LARM proximity reader products (PR-112S-A, SK-2323-SPQ, and SK-1323-SPQ).

SK-1323-SDQ Sealed-Housing Stand-Alone Keypad Features similar to SK-2323-SDQ.

SK-1323-SPQ

Sealed-Housing Stand-Alone Keypad with Built-In Proximity Reader

Similar to SK-1323-SDQ, but with proximity reader.

SK-1123-SDQ

Industrial, 2 Outputs: 5A@28VDC (relay), 1A@28VDC (relay)

Similar to SK-1123-SQ, but with: Large, rigid steel enclosure. Extra-tamper-resistant faceplate.

SK-1123-SQ

Surface Mount, 2 Outputs: 5A@28VDC (relay), 1A@28VDC (relay)

SK-1123-FQ

Flush Mount, 2 Outputs: 5A@28VDC (relay), 100mA@24VDC (transistor)

110 User codes. For solar applications keypad illumination can be dimmed or turned off during standby. Tamper switch, security screws, and heavy-duty construction. Each output can be programmed for momentary (1~999 sec) or toggle. Each code can be programmed for 4~8 digits. Egress input for exiting the protected premises. 12~24 VAC/VDC. Fits standard single-gang electrical box (SK-1123-FQ).

11


2011 Illuminated R-T-E Plates

Mushroom R-T-E Plates SD-7201GC-PEQ

Stainless-steel faceplate. Green mushroom-cap push button. NO/NC contacts rated 5A@125VAC.

SD-7201GCPE1Q

Similar to SD-7201GC-PEQ, but with “EXIT” and “SALIDA” messages on faceplate.

SD-7201GFPE1Q

Similar to SD-7201GCPE1Q, but with DPDT switch. Two NO and two NC contacts, each rated 5A@125VAC.

SD-7201RCPE1Q

Similar to SD-7201GCPE1Q, but with red mushroom-cap push button.

SD-7202GC-PEQ

2" Square illuminated green push button. NO/NC contacts rated 10A@125VAC. Includes switchable English, Spanish and French messages.

SD-7223GW-LQ Similar to SD-7202GC-PEQ, but with white plate.

SD-7103GC-PEQ

Stainless-steel slimline plate. Small, green, illuminated push button. Includes switchable English and Spanish messages.

SD-7251GCEX1Q

1 Green, 1 /2” dia., illuminated, mushroom-cap push button. NO/NC, DPST contact rated 5A@125VAC.

SD-7217GWQ

Similar to SD-7201GCPE1Q, but with white plate.

RF Wireless R-T-E Plates SD-8202GT-PEQ Green, illuminated 2" square push button.

SD-8103GT-PEQ Slimline, small square illuminated push button.

SD-8201GTPE1Q Green, 1½" diameter, mushroom-cap push button.

Ideal for hard-to-wire installations. Built-in RF transmitter.

R-T-E Plates with Timer SD-7202GC-PTQ

Similar to SD-7202GC-PEQ, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.

SD-7201GA-PT1

Similar to SD-7201GCPE1Q, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.

SD-7103GC-PTQ

Similar to SD-7103GC-PEQ, but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.

Vandal-Resistant, Illuminated SD-7275SGEX1Q

Single-gang, vandal-resistant. 1” Diameter, illuminated red/green push button.

SD-7175SGEX1Q

R-T-E Key Switch Plates SD-72051-V0

Shunt switch, shunt ON/momentary OFF, single-gang plate.

SD-71051-V0

Same as SD-72051-V0, but slimline.

SD-72002-V0

Shunt switch, maintained ON/OFF, single-gang plate.

SD-71002-V0

Same as SD-72002-V0, but slimline.

12

Slimline, vandal-resistant. 1” Diameter, illuminated red/green push button.

Condensed Catalog

R-T-E Plates with Pneumatic Timer SD-7213-GSP

Green mushroom-cap push button. NO/NC contacts rated 5A@125VAC. Built-in pneumatic timer, 1~60 seconds. No power required.

SD-7113-GSP

Same as SD-7213-GSP, but slimline.

SD-7273-SSP

Same as SD-7213-GSP, but with stainless-steel push button and guard ring.

SD-7173-SSP

Same as SD-7213-GSP, but with stainless-steel push button and guard ring.

SD-7213-RSP

Same as SD-7213-GSP, but with red push button.

Piezo Electric Push Buttons SD-6273-SSQ

Single-gang, vandal-resistant. Field-programmable color, red or green. Weather resistant.

SD-6173-SSQ

Same as SD-6273-SSQ, but slimline.

Push Button R-T-E Plates SD-7201KBQ Single-gang plate. Black push button. N.C. switch.

SD-7101KBPE1Q

Slimline, black N.C. push button.

SD-7101RAEX1Q

Slimline, red N.O. push button.

Vandal-Resistant RTE Plates SD-7204SGEX1Q

Single-gang, vandal-resistant. 1” Diameter push button. NO/NC contacts.

SD-7104SGEX1Q

Slimline, vandal-resistant. 1” Diameter push button. NO/NC contacts.

Remote Plates SS-299

Stainless-steel plate with 3/4” D-hole.

SS-199

Stainless-steel slimline plate with 3/4” D-hole.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Curtain/Barrier Sensors

Twin Photobeam Detectors E-960-D90Q

E-9622C2B25Q

E-960-D190Q

E-9641C4B25Q

E-960-D290Q

E-9660C6B25Q

Outdoor range: 90ft (30m)

2-Beam, Ht. 57cm. (1.9ft)

www.enforcer.com.tw

Reflective-Beam Sensor E-931-S45RRQ Range: 45ft (14m)

4-Beam, Ht. 105cm. (3.4ft)

Outdoor range: 190ft (60m)

6-Beam, Ht. 152cm. (5ft)

Outdoor range: 290ft (90m)

With laser beam alignment For indoor or outdoor use. NO or NC alarm output. N.C. tamper circuit included. Interruption time adjustable. Built-in laser beam alignment system makes for quick, easy installations.

E-9679C8B25Q

8-Beam, Ht. 201cm. (6.6ft)

Uses 12~240 VDC/24~240 VAC. Pre-wired 6ft (1.8m) cord. Weatherproof (IP66) construction for indoor/outdoor usage. Brackets (2) and mounting hardware included.

E-931ACC-RCQ 3” Round Reflector.

E-931ACC-HRQ

Multi-Frequency Photobeam

Hood for the E-931ACC-RCQ or E-931ACC-R (2” square reflector.)

E-964-D390Q

Polarized Reflective-Beam Sensor

Outdoor range: 390ft (120m)

E-931-S33PRQ Range: 33ft (10m)

4 Frequencies to eliminate interference. With laser beam alignment

The E-964-D390Q has all the same features as the E-960-D90Q, D190Q, and D290Q, including laser beam alignment. Incorporates a 4-frequency function (programmable) to eliminate the possibility of interference when multiple photobeams are located within close proximity.

Quad Photobeam Detectors

E-964-Q165Q

Outdoor range: 165ft (50m)

E-964-Q330Q

Outdoor range: 330ft (100m)

E-964-Q495Q

Install in windows, doorways, skylights, fence tops, any place where space is limited. Slim-line design (7/8” x 15/16”)(22.3 mm x 33.5 mm) Triggers on breaking of any single or 2 adjacent beams (programmable). Rugged aluminum construction. Weatherproof IP65 construction. Anti-tamper circuit triggers alarm if power is cut or end cap is removed. No synchronizing wires required. N.O./N.C. relay output, 1A @ 12~24 VDC. LED alignment indicator. L-brackets and mounting hardware included.

Outdoor range: 495ft (150m)

E-964-Q660Q Outdoor range: 660ft (200m)

With laser beam alignment

Multi-frequency (four channels selectable). Reduces interference between multiple units installed in close proximity. Weatherproof, sunlight-filtering case for indoor & outdoor conditions. Anti-frost system with built-in heater. NO/NC alarm output. N.C. tamper circuit. Quick, easy installation with built-in laser beam & audible alignment system. Built-in alignment-strength indicator.

Single Photobeam Detector E-961-S90WQ 90ft (30m) Sensing distance. IP66 for indoor and outdoor use. o Mounts flat or at 90 to the wall with no need for extra brackets. Adjustable lens angle.

The E-931-S33PRQ Polarized Reflective-Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor. For assembly-line automation, outdoor gates, garage doors, or overhead doors. Excellent immunity to shiny objects that could cause false triggering. Operates on 12~250 VAC/VDC.

Flush-Mount Beam Sensors E-932-D33TBQ Photoelectric Through-Beam Sensor Range: 33ft (10m)

E-932-S16RRQ Photoelectric Reflective-Beam Sensor Range: 16ft (5m)

Flush-mount design. Fits single-gang box. For entrances, hallways, offices, etc.

13


2011 12VDC Plug-in Switching AC Adapters ST-UV12-S0.5Q 0.5 Amp ST-UV12-S1.0Q 1 Amp ST-UV12-S2.0Q 2 Amp

Sideways plug for ease of use on power strips. Universal 100~240 VAC input. Regulated 12VDC output. Low current draw. 6ft (1.8m) Cord, 2.1mm plug (positive center).

Fits easily on power strip ST-UV12-S1.0Q Shown

Efficiency Level

Tabletop Switching Power Supplies

Power Supply Chargers ST-1206-1.5AQ ST-2406-2AQ ST-2406-3AQ ST-2406-5AQ ST-2406-7AQ ST-2406-10AQ

Regulated and filtered output voltage. Short-circuit protection. Built-in backup battery charger. Switches to backup battery automatically in case of power loss.

LED power indicator. ST-UV12-S3.0Q Shown Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (+ center). Includes AC power cord (IEC320-C13). Low current draw. LED power indicator Efficiency Level

Voltage Converters ST-LA105-TTQ 0.5 Amp ST-LA110-TTQ 1 Amp

Converts 8~30 VAC/VDC to a regulated selectable and adjustable 5/12/24 VDC output: 8~30 VDC/VAC input for 5 VDC output 15~30 VDC/VAC input for 12 VDC output 24~30 VDC/VAC input for 24 VDC output Small size for easy installation.

Voltage Booster ST-HB105-TTQ Compensates for DC voltage drops over long cable runs: 7~12VDC input for 12VDC output 12~24VDC input for 24VDC output Output current: 500mA@12/24 VDC.

12VDC Linear Power Supply ST-1212-R0.5A 500mA, Regulated

Use in CCTV, access control alarms, etc. 6ft (1.8m) Line cord, 2.1mm positive center coax plug.

14

ST-2406-2AQ

ST-2406-10AQ

ST-1206-1.5AQ

6/12

1.5A

ST-2406-2AQ

6/12/24

1.5A

2A

ST-2406-3AQ

6/12/24

2.5A

3A

4A 7A

5A 7.5A

9A

10A

16VAC/50W 16VAC/100W 24VAC/50W 24/28 VAC/100W* 24/28 VAC/180W* 28VAC/350W

Dual-input voltage: 120/240 VAC, 50/60Hz. Works with the SECO-LARM series of power supply/chargers. Shielded windings to reduce electromagnetic interference.

* Dual-voltage output: 24 or 28 VAC

Siren Driver SA-006DQ

Siren driver with dual-power inputs. Two tones, steady and burst. 6~12VDC operating voltage.

Siren SH-532L 128dB Multi-tone siren. Miniature size: 4” long, 3½” diameter. 6~12 VDC, 1.4A current draw.

SA-027Q

2A

Open-Frame Transformers ST-UV16-W50Q ST-UV16-W100Q ST-UV24-W50Q ST-UVDA-W100Q ST-UVDA-W180Q ST-UV28-T350Q

Miniature: 13/16"x29/32"x5/8". Adjustable from 1~180 sec. Buzzer output. Form C relay.

Programmable Annual Timer

Voltage Current Current (DC) (peak)

ST-2406-5AQ 6/12/24 ST-2406-7AQ 6/12/24 ST-2406-10AQ 6/12/24

Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact. Adjust from 1sec to 60min. Form C relay.

SA-026Q

ST-UV12-S3.0Q 3 Amp ST-UV12-S4.0Q 4 Amp ST-UV12-S5.0Q 5 Amp

Programmable Timers SA-025Q

Convert low-voltage AC input power to low-voltage DC output power.

Model #

Condensed Catalog

365-Day annual timer. 12~24 VAC/VDC Operation. Two NO or NC Form C relays: 10A@120VAC / 28VDC. Each relay can be programmed for 50 events, total of 100 individual programmable events. 100 Programmable events can be set weekly, daily or hourly 365 days a year. One egress input per relay (two total). Output can be shunt or momentary, and can be programmed for 1~99 seconds.

Delayed Egress Timers SA-025E1Q 12/24 VDC Operation. Lock control relay (SPDT): 10A@24VDC. Buzzer output: 85dB.

SA-025EQ

SA-025EQ Shown

12~24 VDC Operation. Lock control relay (SPDT):10A@24VDC. Remote alarm relay: 10A@24VDC. Local alarm, transistor ground output. Three relocking modes via jumper: —Standard (preset) —BOCA —Timed

Relay Board SR-2224-C5Q 5 Amp relay, DPDT, Form C. 6/12/24 VDC operation. LED indicates power.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Voice Dialer

SM-207Q

N.C. 3/8” press-fit mount with leads. 1” Gap.

SM-207-5Q With 2 NO/NC triggers

Two NO/NC triggers. Two independent channels. Stores up to four numbers. Delivers message of up to 16sec to each number. Repeats message for one minute to ensure full delivery. Optional 9VDC internal battery. Use worldwide with Universal Dial Tone.

Multi-Purpose Battery Testers ST-BT02Q

3 N.C. mini /8” press-fit mount with leads. 3/8” Gap.

SM-207-5LQ

3 N.C. mini /8” press-fit mount with leads. 1” Gap.

SM-207-31Q

ST-BT03Q

12 or 24 VDC Tester, includes buzzer for audible continuity, and LED headlight.

SM-226LQ

N.C. overhead door with “L” bracket. 24” Stainless-steel cable. 23/4” Gap.

SM-226L-3Q

NO/NC overhead door with “L” bracket. 23/4” Gap.

SM-226RQ

N.C. overhead door with round bracket. 24” Cable. 23/4” Gap.

1 N.C. mini /4” press-fit mount. 1” Gap.

SM-207-41Q

3 N.C. mini /8” press-fit mount. 13/4” Gap.

6-in-1 12VDC Battery tester with continuity LED.

Test for: 1. Voltage 2. Battery load 3. Voltage drop 4. PTC fuse 5. Polarity 6. Continuity

Overhead Door Contacts

Recessed Contacts

E-920B

SM-206Q

1 N.C. /4” recessed mount with leads. 1” Gap.

www.enforcer.com.tw

Surface-Mount Contacts SM-200Q

N.C. surface mount with screw terminals. 3/4” Gap. Includes cover. SM-823 -- Additional terminal cover.

SM-300Q

N.O. surface mount with screw terminals. 3/4” Gap. Includes cover.

Self-Stick Contacts ST-BT02Q Shown

Indicates the condition of rechargeable gel-type 12VDC batteries. Equipped with a momentary simulated load. Portable and easy to use.

High-Speed Latching Tester ST-BL01Q Real-time, latch, and auto-reset modes for testing N.O. and N.C. circuits. Features LED and buzzer indicator for remotely testing a connection. Convenient headlight LED for easy installations.

Low Battery Cutoff

N.C. mini self-stick surface mount with flange and center leads. 1” Gap. SM-204M -- Magnet for SM-204Q/205Q.

SM-205Q

N.C. self-stick surface mount with flange and side leads. 1” Gap. SM-204M -- Magnet for SM-204Q and SM-205Q.

Screen Contacts SM-209

N.C. mini self-stick surface mount for screens, with leads. 3/4” Gap.

ST-BD01Q

SM-216Q

N.C. wide-gap surface mount with screw terminals. 23/4” Gap. SM-216M -- Magnet for SM-216Q.

SM-217Q

N.C. wide-gap mini surface mount with concealed screw terminals. 2” Gap.

Magnetic Contact Accessories SM-852LQ

Aluminum “L” bracket for SM-226LQ.

SM-831

Alnico 5 magnet, 11/4”x1/4” dia.

SM-841 SM-266

N.C. super-thin screen mount with leads. 11/4” Gap.

Prevents deep discharge of backup batteries. Selectable input 12/24 VDC. Adjustable voltage cutoff and restore point. Green LED AC indicator & 2-color DC LED indicator.

Wide Gap Contacts

SM-204Q

Alnico 5 magnet, 15/8”x3/8” dia.

SM-851

Aluminum “Z” bracket for SM-216Q.

15


2011 SS-090

Two terminals, shunt SPST. Maintained ON-OFF, key removable from both ON and OFF positions. Specify key number when ordering.

SS-090-1

Similar to SS-090, but key removable in OFF position only.

SS-095

Two terminals, momentary SPST. Maintained OFF, springs back from ON, key removable from OFF only. Specify key number when ordering.

SS-092-2

Two internal SPST switches, one always ON, one always OFF.

SL-126Q

For 6~12 VDC use.

SL-126-A24Q

Extra keys. Specify number when ordering (1300~1310).

SS-080FM

Shunf OFF/ON. 2 Terminals, spst.

Detectors and Switches SS-078Q

N.O. latching panic button.

SS-077Q N.C. latching panic button.

SS-040Q

N.C. vibration/shock sensor. Adjustable sensitivity.

SS-072Q

N.O. tamper switch.

SS-073Q

N.C. tamper switch.

SS-074Q

N.O. double-button momentary hold-up switch.

SS-075Q

Same as SS-075Q but NO/NC (selectable).

SS-075C-PEQ

Emergency & Push-To-Exit NO or NC (selectable) momentary contact. Three labels included.

SS-076Q

Toggle switch. Available in gray or white.

SS-038-2CSBO

16

(SL-126Q)

Perfect for "informative" household burglar alarm use. Incorrect polarity cannot damage circuit or draw current. Low current consumption with long-operating lifespan of over 300 continuous hours (2,000,000 flashes). Choice of amber, blue, clear, green, or red lens. Lens is made of high-impact resistant acrylic, case of high-impact resistant ABS plastic. SL-126LQ -- Extra lens for SL-126Q and SL-126-A24Q. Choose amber, blue, clear, green, or red.

Shadow/eyeball switch.

Range: 22ft (6.7m) For entrance monitoring or entrance indicator. “Ding-dong” or siren sound on beam interruption. Plug-in components. No hard wiring needed. Includes reflector, brackets, 9VDC adapter, mounting hardware, chime. Optional counter also available.

E-931ACC-CQ

SL-1301-BAQ 5 Strips (20 LEDs) SL-1301-BBQ 10 Strips (40 LEDs)

Available in five colors: amber, blue, clear, green, or red. LED Strobes feature a longer life with less heat generated. Adjustable flashing speed. Programmable for flashing strobe or rotating beacon mode (six different flash patterns).

Counter for the E-931CS22RRCQ.

E-931ACC-SQ

Additional speaker/chime for the E-931CS22RRCQ.

LED Strobe Lights

Glass-Break Detector, Audio ENFORCER 190

IP66

Audio discriminator. Patented design detects high-frequency sound of glass breaking while filtering out ambient environmental noise. When ceiling mounted, protects to a 25ft radius. Protects 45ft to the front and 25ft to either side.

Buzzer

High-Intensity LEDs SL-1311-MA

4 High-intensity 1W LEDs

SL-1302-MA

52 High-intensity LEDs Available in four colors: amber, clear, blue or red. 10~30 VDC Operation. 19 Programmable flash patterns. Synchronize up to 15 units.

N.O. “EMERGENCY” button.

SS-075CQ

E-931CS22RRCQ

For 6~24 VDC use. Easy 2-wire connection for 6~12 VDC or 6~24 VDC.

SS-090KN

Entry Alert System

Strobe Lights

Key Locks

Condensed Catalog

12-Inch LED Strips SL-S212

Available in four colors: white, red, blue or yellow (/WAQ, /RAQ, /BAQ, /YAQ). 12-LED strips for informative or decorative installations. 12VDC Operation. Each strip can be cut to varying lengths depending on the application. Strips can be connected end-to-end for maximum versatility. Optional accessories: ● SL-SAS-PC1Q Power Connector ● SL-SAS-EC1Q End Cap ● SL-SAS-SH1Q LED Strip Fastener

SH-504Q

Miniature 85dB electronic buzzer. 5~15 VDC, surface mount or mount in 3/4" (19mm) hole of alarm panel or remote plate. Low current draw of 35mA@12VDC.

Power Distribution Boards Main input power fuse. Includes circuit board only.

PD-4PSQ

PD-9PSQ Shown

4-Output, 1.1A each, PTC Fuses, 5 Amp.

4-Output, 1A each, Blade-style Fuses, 5 Amp.

PD-4BSQ

PD-9PSQ

9-Output, 1.1A each, PTC Fuses, 5 Amp.

9-Output, 1A each, Blade-style Fuses, 5 Amp.

9-Output, 3A each, PTC Fuses, 10 Amp.

9-Output, 3A each, Blade-style Fuses, 10 Amp.

5-Output, 1.1A each, PTC Fuses, 5 Amp.

PD-9BSQ

PD-9PHQ PD-9BHQ PD-5PAQ


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Component Video Baluns MVE-PC015Q

A/ V Multi-Media

Transmits YPbPr or RGB video signals. Four RCA connectors to RJ-45 jack. Supports HDTV (480i /480p/720i/720p/1080i/1080p). Maximum distance: 160ft (50m)@1080p, 900ft (300m)@480i. Passive operation, requires no power. Stackable or wall mountable. Programmable digital audio or IR pass-through.

Passive VGA Balun

Audio Baluns MAE-P115-01Q Analog Audio Balun

A/ V Multi-Media

RCA-to-terminal block. Transmits audio up to 1,000ft (300m) over Cat5e/6 UTP cable. Gold-plated connectors.

MAE-P215-01Q Digital Audio Balun

RCA-to-terminal block. Transmits digital audio 600ft (180m) over Cat5e/6 UTP cable. Supports Dolby Digital, DTS. Gold-plated connectors.

MAE-P127-01Q

Snap-in Analog Audio Balun

MVE-PCW15Q

Easily snaps in or out of wall plates or patch panels. RCA-to-RJ-45 Jack. Analog audio.

Similar to MVE-PC015Q, but wall-plate version.

MAE-P227-01Q

Snap-in Digital Audio Balun

Passive Composite Video Baluns MVE-PB010Q

Composite Video Balun

A/ V Multi-Media

RCA-to-terminal block. Transmits composite video YPbPr or RGB video signals. With screwless terminal block connection and passive operation.

Snap-in Composite Video Balun Transmits composite video YPbPr or RGB video signals. Easily snaps in or out of wall plates or patch panels. RJ-45 Jack. Passive operation. Max. distance: Color - 2,230ft (680m), B/W - 2,550ft (780m).

Component Video + Digital Audio to HDMI Converter

Input: Four RCA connectors (three for component video, and one for digital audio). Output: HDMI jack. Supports HDTV resolution up to 1080p. 5VDC Power adapter (included).

MAE-P317-01Q Stereo Balun

MAE-P337-01Q

Stereo Mini (3.5mm) Plug Balun

Component Video & Digital Audio to HDMI MVA-EH01Q

Easily snaps in or out of wall plates or patch panels. RCA-to-RJ-45 Jack. Digital audio.

Eases installation of dual mono or single stereo audio over Cat5e/6 cable. Dual RCA jacks (red/right, white/left) on 6� (15cm) pigtail-to-RJ-45 jack. Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable. Gold-plated connectors.

MVE-PB020Q

A/ V Multi-Media

www.enforcer.com.tw

Send audio over Cat5e/6 cable from mini-stereo plug. Stereo mini plug on 6� (15cm) pigtail-to-RJ-45 jack. Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable. Gold-plated connector.

EVT-SBP-GQ

Transmits VGA signals over Cat5e/6 cable. Use with personal computer, DVR, etc. with VGA output to CRT or LED monitors or VGA projectors. Up to 450ft (137m) range. Passive device. No power required. Sold in pairs.

A/ V Multi-Media

Active VGA Baluns MVD-V1501-1Q

VGA Extender 1-In-5-Out

A/ V Multi-Media

Transmits VGA signals from a single source to multiple CRT or LCD monitors or VGA projectors. Extends VGA range to 984ft (300m) over one Cat5e/6 cable. Supports up to 1920x1200 resolution. Each set includes one transmitter and one receiver. Additional receiver (MVD-V1101-1RQ) available.

MVD-V1201-1Q

VGA Extender 1-In-2-Out Transmits VGA signals from a single source to two CRT or LCD monitors or VGA projectors. Extends VGA range to 984ft (300m) over one Cat5e/6 cable. Supports up to 1920x1200 resolution. Each set includes one transmitter and one receiver. Additional receiver (MVD-V1101-1RQ) available.

MVD-V1101-1RQ

Additional Receiver for the MVD-V1501-1Q and MVD-V1201-1Q.

VGA & Stereo to HDMI Converter MVA-VH01Q

VGA input (plus stereo audio) to HDMI signal. Allows display from computer on HDMI monitor.

A/ V Multi-Media

Input: VGA connector and dual RCA jacks (red/right, white/left). Output: HDMI jack. HDCP Pass-through. 5VDC Power adapter (included).

17


2011 HDMI Repeater

HDMI over Dual Cat5e/6 MVE-AH010Q

A/ V Multi-Media

Connect HDMI equipment using low-cost Cat5e/6 UTP cables. Works with full-motion video and audio signal up to 195ft (60m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to eliminate feedback. Compact size. 5VDC Power supply included. Supports DDC, EDID, and hot-plug detection.

HDMI over Single Cat5e/6 MVE-AH020Q

MVR-HH01Q Extends high-definition video and digital audio up to 115ft (35m). Supports high-definition video up to 1080p.

Active IP Baluns A/ V Multi-Media

HDMI/Optical Cable MC-1101-09FQ 9ft (3m) Length. HDMI Type-A to Type-A. Gold-plated connector. 28AWG OFD: 7.5. 90째 Angle cable versions also available.

Black chrome cable

A/ V

Active IP Balun over Coax

MC-5501-09FQ

9ft (3m) Single-mode optical patch cable. 2 x Toslink connectors.

Transmits an IP signal or any other TCP/IP signals over existing coax cable. Distance up to 5,900ft (1,800m). 5VDC Adapter included.

HDMI Couplers MC-2201Q

MVE-AH030Q

The ENFORCER MC-2201Q is used to join two HDMI cables together. It has gold-plated contacts for reliability and longer life.

IPB-A1100Q

Active IP Balun over Cat5e/6 A/ V Multi-Media

For joining two HDMI cables together. Gold-plated contacts. Compatible with all 19-pin HDMI cables, supports HDCP.

Identical to IPB-A1200Q, but uses Cat5e/6 cable instead of coax. Distance: Up to 3,900ft (1,200m). 5VDC Adapter included.

MC-2101Q Similar to MC-2201Q, but rotates 180째. Use for running HDMI cables in tight locations.

Power Over Ethernet Repeater IPR-P188Q PoE Repeater

HDMI Switcher MVS-H4101-0Q

18

Extend power and data 300ft (100m). Use multiple units to extend power and data range to 1,800ft (600m). Passive device, requires no external power. Compatible IEEE 802.3af PoE standard. Supports 10/100/1000 BASE-T. Built-in LED status indicator. Plug-and-play for easy installation.

A/ V Multi-Media

A/ V Multi-Media

Active. IR Pass-through. Transmits HDMI signal over dual Cat5e/6 cables. Range to 164ft (50m). Resolution to 1080p.

IP over coax allows installation of an IP camera at the end of a coax run instead of having to pull new Cat5e/6 lines. The units do not filter out any protocols, codes, or applications, ensuring compatibility with any IP camera and its software.

IPB-A1200Q

A/ V

Wall-Plate HDMI over Cat5e/6

ENFORCER Active IP Baluns are designed to extend any TPC/IP devices beyond the 300ft (100m) limit of Ethernet. The units extend the range to 3/4mi (1.2km) for Cat5e/6 or 1.1mi (1.8km) for coax. Use existing coax or Cat5e/6 cable for the runs.

Multi-Media

Multi-Media

Connect HDMI equipment using low-cost Cat5e/6 UTP cable. Works with full-motion video and audio signal up to 164ft (50m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to eliminate feedback. Compact size. 5VDC Power supplies included. Supports DDC, EDID and hot-plug detection.

Condensed Catalog

Easily switch between any of four HDMI sources by remote control or push button. Easily connects to different digital video sources (DVD, A/V receiver, satellite, game console, etc.). HDTV: Resolution up to 1080p. 24K Gold-plated connectors. IR Remote control included.


Tel: 886-2-2378-6161 Fax: 886-2-2378-6163 e-mail: info@superior-elec.com

Keyless Entry/Alarm

Vehicle Security Systems E-100LB Entry-Level Alarm

Entry-level alarm system packed with the most wanted features including two slimline 4-button RF remote controls, relay for flashing parking lights, and outputs for door locks and starter disable.

Two 4-button RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Dual-stage shock sensor (patented). 128dB Multi-tone siren. 5-Function LED. Multi-function push button. Multiple programming functions.

SLI® 259A Dual-stage Microwave Sensor

Two 2-button RF remotes. Easy to install. Flashing parking lights with built in relay. Two built-in, heavy-duty door lock/unlock relays. Auxiliary output for popping trunk, starting car, etc.

Ideal for vehicles with cloth or open tops, or open sunroofs. Dual-stage protection -- Chirps siren if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt).

SLI® 840 High-End Keyless Entry/Alarm The perfect alarm for any vehicle security application. Use as a keyless entry system, or as a complete multi-featured alarm.

E-300L Full-Featured 3-Channel Alarm

Two 3-button RF remotes. Dual-stage glass-break sensor with remote microphone. Dual-stage shock sensor. Starter-disable relay built-in.

Additional features include built-in flashing parking light relay and outputs for door lock/unlock (+/–) and domelight supervision. The remote is ultra-slim and durable, and is used for arm and disarm, chirp delete, zone and sensor bypass, as well as panic.

Two 4-button “Icon” RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Domelight supervision output. Dual-stage shock sensor (patented). 128dB Multi-tone siren and separate horn-honk output. 7-Function LED. Multi-function push button. 13 Programming functions.

Immobilizers SLI® 762PP-ISS

Passive Proximity Immobilizer

E-640Plus Top-of-the-Line Alarm

This top-of-the-line alarm also features a patented dual-stage electromagnetic shock sensor, starterdisable output, 17 programmable functions, and outputs for 2-step door unlock as well as doublepulse door unlock.

Two 4-button RF remotes. CODEBUMP™ code-hopping technology, with CodeWash™ to delete lost or stolen remotes. Five on-board relays for parking lights, door locks, 2nd channel, and domelight supervision. Extended range capability.

CBA® 33 Self-Contained Vehicle Alarm Two 2-button RF remotes: – Arm/disarm up to 200ft (60m). – Panic protection. Silent arm/disarm. – Defective zone & shock sensor bypass via remote. Built-in dual-stage shock sensor (patented). 5-function LED shows armed, disarmed, valet, learn mode, and RF reception. Emergency disarm/valet. Instant triggering. Current-sensing protection. Backup battery capability.

Vehicle Accessories

SLI® 830 Basic Keyless Entry

www.enforcer.com.tw

The Passive Proximity Immobilizer eliminates the hassle of remembering how and when to operate a vehicle security system. Just put the included keyfob on the keychain, and the system arms and disarms automatically. Two on-board relays for disabling the starter, ignition, or fuel pump. Installer test mode helps determine best position for the sensing coil. Plug-in status LED included. No valet switch needed.

SLI® 762FP-ISS

SS-052BB Dual-stage

Electromagnetic Shock Sensor Dual-stage protection --- Chirps siren if car lightly tapped, triggers alarm on break-in or vandalism attempts.

SS-051ME Dual-stage Glass-break Sensor Includes remote microphone with 3ft cable for easy mounting and concealing inside the car. Dual-stage protection -- Chirps siren on light tap of window, triggers alarm on break-in.

SR-5220A /SR-5440A 2 & 4 Window Roll-up Modules

Compatible with most power-window systems. Works off momentary or constant ground trigger. System override if ignition is turned on, doors unlocked, or any door opened. Interfaces with all ENFORCER RF alarm systems. SR-5220A --- 2-Window module. SR-5440A --- 4-Window module.

SR-5201R

Power Door Lock Interface Allows nearly any alarm to control nearly any type power-door lock/unlocks. Includes two pre-wired, built-in, heavy-duty 30 Amp relays with protecting diodes and spike/noise suppressors.

Touchkey Immobilizer

The Touchkey Immobilizer combines high security with the convenience of completely passive arming. To arm, turn off the ignition. 30 Seconds later, up to two of the car’s electrical circuits are disabled. To disarm the system, insert the Touchkey momentarily into the Touchkey receptacle. Start the vehicle within 30 seconds or the Immobilizer will rearm.

Two Touchkeys supplied with each unit. Handsomely crafted backlit receptacle. Flashing status LED indicates immobilizer armed, disarmed, code-learning mode, and valet override.

19



ENFORCER Mini Catalog