__MAIN_TEXT__

Page 1

PHANTOMATIC PHANTOMATIC M3 PHANTOMATIC M4L PHANTOMATIC T3A PHANTOMATIC T3S PHANTOMATIC T3STAR PHANTOMATIC X4 PHANTOMATIC X6

GB


PHANTOMATIC X6


SELECT YOUR PARTNER


WINNING SERIES

PHANTOMATIC M3 PHANTOMATIC M3L

PHANTOMATIC T3A PHANTOMATIC T3S PHANTOMATIC T3STAR PHANTOMATIC X4

PHANTOMATIC X6

Phantomatic: each one has its own One range, many solutions. Phantomatic is the range of CNC machining centres for aluminium, light alloy, PVC and steel profiles with up to 3 mm thickness (according to the models). It offers many options and configurations to meet every specific requirement. Available in 3+1 or 4 CNC axes version with X-axis stroke of 3000 mm or in 3, 3+1 or 4 CNC axes version with X-axis stroke of 4300 mm. Finally a 4-axis version is also available with a 7700 mm X-axis stroke.


X4/X6

M3

M4L


T3STAR

T3A

TAILORED CHOICE The winning combinations Phantomatic offers various constructive solutions to adapt to the various operational requirements. In the M4 L, X4 and X6 models, thanks to the 4th axis CNC, the electrospindle rotates from 0° to 180° continuously to operate on the whole contour of the workpiece, guaranteeing the possibility of working at all intermediate degrees including tenths of a degree. The T3 S and T3 Star models have a rotary work table, which allows machining the profiles with angles ranging between -90° and +90°, keeping the spindle always in a vertical position, thereby ensuring maximum power and precision. The 3-axes models, T3 A, allow machining the 5 sides of the profile thanks to the use of high slewing speed angular units. Finally, the M3 model has an electrospindle with automatic rotation of the tool on three fixed positions at +/-90° intervals, enabling machining on 3 sides of the workpiece.


ALU - WOOD

STEEL

ALU

PVC


ACTION POWER Power and agility Phantomatic can be equipped with electrospindles with high torque power ranging from 4 to 7.5 kW in S1 in order to carry out heavy-duty processing. The double tank lubrication system (excluding M3 and M4 L) allows using both a minimal oil quantity and oil emulsion micro-mist. Therefore, you can choose the best suited system according to the type of material and processing. As an option, the spindle can be set for rigid tapping and FlowDrillÂŽ (T and X versions).


REFERENCES AND CLAMPING Intelligent clamps Phantomatic always opts for the best grip. The position of every clamp unit is calculated by a software according to the operations to be carried out on the profile so as not to interfere with the processing clearance. The units are moved quickly and without any margin of error. The X6 HP version is an exception since it has two additional axes that position the clamps separately from the trolley while the machine is running. The M3, M4 L, T3 A, X4 and X6 models have a translation movement in Y of the clamp unit, which allows processing the sides even of important profile sections, despite the clearance of the angular unit i.e., the rotated spindle.

Left and right To ensure correct positioning of the workpieces, Phantomatic is equipped with recessed profile reference end stops. One on the left and one on the right (optional), selected automatically. The presence of two end stops allows processing 2 profiles, operating in multipiece mode (excluding M3 and M4 L) or oversized bars with a single programming by repositioning the workpiece on the second end stop.


TOOL MAGAZINES Versatile tool storage unit The tool magazine for every Phantomatic in the T series has 4 or 8 slots and features an exclusive round design that reduces the overall dimensions and increases tool change speed. The covering protects the tool magazine from swarf and accidental knocks. Besides the standard tools, the tool magazine can also be equipped with 2 angular units and a milling disc for machining all the sides of the profile. The Phantomatic X4 and X6 8-slot tool magazine is located on the trolley solidly connected to the electrospindle. This solution allows for a drastic reduction of tool change times, thereby making them always available exactly where they are needed. The Phantomatic M3 and M4 L models have 2 automatic magazines, both optional for M3 one optional for M4 L, that can be installed on the sides of the cabin to accommodate up to 8 tool holders (4+4). In addition, a tool magazine with 9 slots is located on the front panel that enables manual placement inside a compartment of tool holder tapers not used during machining.


TOTAL CONTROL Interface under control The Phantomatic range operator interface is equipped with a 15� suspended monitor that can be oriented according to requirements. The touch-screen display and a user-friendly software make the interface particularly simple and intuitive. The control is integrated with the mouse, keyboard and front USB port for external memory connection. The CNC can also be set to be equipped with a barcode reader and an MG PILOT pushbutton panel that optimises the management of manual functions.


DOUBLE AREA Maximum productivity Phantomatic X6 is available in 3 versions: X6 M, X6, X6 HP. All versions can operate in single-piece and multipiece mode on a single machining area of up to 7.7 m length. The X6 and X6 HP models also allow machining in pendular mode on two independent machining areas. The HP version allows operating in dynamic pendular mode thanks to two independent clamp positioners, controlled by two additional axes, which position the clamps while the machine is running. The positioners are equipped with a workpiece reference end stop, which allows positioning several profiles in each machining area.


Single Piece Mode

Swinging Mode

Multi-piece mode (max 2 workpieces per X6 M and X6 version)

Dynamic Swinging Mode


TAKE MEASURE Measure your profile Phantomatic X4 and X6 are equipped with a profile length measuring system. A moving plate located on the right hand side of the trolley allows the machine to electronically verify the true length of the profile to be machined. Once the workpiece has been adjusted with reference to the left and right end stops, the system electronically imports the data and the CNC automatically corrects any errors due to manual insertions.


IN YOUR HAND

Close at hand MG Pilot is the pushbutton panel of the Phantomatic range, equipped with LCD graphic display that allows to have all the machine functions close at hand. The display shows all the manual operations that are validated through the pushbutton panel; this way, the operator does not have to place himself at the CNC on board the machine. MG Pilot is particularly useful in Pendular mode.


unit of measurement

PHANTOMATIC M3

PHANTOMATIC M4L

X-AXIS (longitudinal) 1 side/3 sides (M3 only); 1 side/5 sides

mm

3000/2815/2630

3000/2815/2630

Y-AXIS (transversal) 1 side/3 sides (M3 only); 1 side/5 sides

mm

250/100

210/170

Z-AXIS (vertical) 1 side/3 sides (M3 only); 1 side/5 sides

mm

210

210

°

-90°/0°/ +90°

0° ÷ 180°

X AXIS (longitudinal)

m/min

56

56

Y AXIS (transversal)

m/min

22

22

Z AXIS (vertical)

m/min

22

22

A AXIS (automatic rotation)

°/min

-

-

WORKING AREA

A AXIS (automatic rotation) POSITIONING SPEED

ELECTROSPINDLE FEATURES kW

4

4

Maximum speed

1/min

20000

20000

Maximum torque

Nm

Maximum power in S1

Tool attachment cone Electrospindle set for Flow-Drill®

1,9

1,9

HSK-50F

HSK-50F

-

-

TAPPING CAPACITY (with tap, on aluminium through hole) Encoder on electrospindle for rigid tapping With compensator Rigid tapping

-

-

M5

M5

-

-

TOOL STORAGE UNIT Automatic tool change Number of tools in the storage unit

9 - 4+4 (o)

9 - 4 • - 4 (o)

Maximum diameter of the tool that can be loaded into the storage unit

mm

8

8

Maximum length of the tool that can be loaded into the storage unit

mm

150

150

1

1

mm

80

80

Maximum number of angular units

-

-

90° angular unit - 2 outputs - ER20

-

-

Roto head

-

-

1+1 (o)

1+1 (o)

4

4

Automatic clamp positioning through X-axis

Automatic clamp positioning through H and P-axes

-

-

Side tunnels

o

o

-

-

CNC-PC with LCD-TFT touch screen display

USB port

RJ45 network card

Blade slot in the storage unit Maximum diameter of the blade that can be loaded into the storage unit

POSITIONING AND LOCKING OF PROFILE Fixed automatic workpiece reference end stops Independent dynamic workpiece reference end stops Maximum number of pneumatic clamps Manual clamp positioning

LUBRICATION Double tank that allows managing different lubricants 1) oil emulsion water micro-mist lubrication system and 2) minimal oil quantity lubrication system CNC features

MG PILOT pushbutton panel

-

-

Barcode reader/barcode radio

o

o

SOFTWARE ON BOARD THE MACHINE CAM - EDITOR - DRILL

CAMPLUS - JOB - SHAPE

o

o

Rubber swarf evacuation belt

-

-

Fume extraction system

-

-

OTHER OPTIONS

GENERAL DATA Overall machine weight

kg

2000

2000

Operating pressure

bar

6÷8

6÷8

Nl/min

175

175

A

10

10

Installed power

kW

6,5

6,5

Overall machine dimensions (L x H x P)

mm

3707 x 2145 x 2175

3707 x 2145 x 2175

Air consumption Current consumption

included

o

optional

-

not available


PHANTOMATIC T3A

PHANTOMATIC T3S

PHANTOMATIC T3STAR

PHANTOMATIC X4

PHANTOMATIC X6

4000/3760

3250/3150

3250/3150

4000/3760

7700/7460 7320/7080 (Version HP)

210/140

210

210

210/180

210/180

258/230

215/160

215/160

250/250

250/250

-

-90°/0°/ +90°

-90° ÷ +90°

0° ÷ 180°

0° ÷ 180°

56

56

56

75

75

22

22

22

22

22

22

22

22

22

22

-

-

-

4500

4500

5,5 - 7,5 (O)

5,5 - 7,5 (O)

5,5 - 7,5 (O)

7

7

20000

20000

20000

16500

16500

7,5

7,5

7,5

7,5

7,5

HSK-63F

HSK-63F

HSK-63F

HSK-50F

HSK-50F

o

o

o

-

-

o

o

o

o

o

M8

M8

M8

M8

M8

M10

M10

M10

M10

M10

4 - 8 (O)

4 - 8 (O)

4 - 8 (O)

8

8

12

12

12

12

12

150

150

150

150

150

1

1

1

1

1

180

180

180

180

180

2

2

2

2

1

o

o

o

o

O

-

-

-

-

1+1 (O)

1+1 (O)

1+1 (O)

1+1 (O)

2

-

-

-

-

• (Version HP)

4-6 (O)

4

4

4-6 (O)

6 - 12 (O)

-

-

-

-

-

• (Version M - X6)

-

-

-

-

• (Version HP)

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

-

-

1950

2000

2000

2000

3600

6÷8

6÷8

6÷8

6÷7

6÷7

175

175

175

175

175

16

16

16

16

16

7,5

7,5

7,5

10

10

6371 x 2283 x 2255

4844 x 2283 x 2255

5832 x 2024 x 2207

6371 x 2283 x 2255

10196 x 2283 x 2283


The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products. Please contact the sales personnel if you have any queries.

w w w. e m m e g i . c o m Š Voilà p holding S.p.A. - December 2018 - All rights reserved - GB 276703.06

Profile for Emmegi Group

Phantomatic GB  

Machining centers

Phantomatic GB  

Machining centers

Profile for emmegi