Page 1

COMET X COMET X4 COMET X6 COMET X6HP

GB


COMET X6HP


NEW POWER


SPEED AND BEAUTY

COMET X4

COMET X6 - COMET X6HP

Comet’s X Galaxy Guaranteed safe, ergonomic and easy to use. These are the distinctive features of the Comet X family: 4-axis CNC machining centres designed for working bars or parts in aluminium, PVC, light alloys in general and steel. In the HP version (Comet X6HP), the machine has two additional axes for positioning clamps and reference stops in concurrent time during double operation mode. In Comet X, the 7 kW electrospindle in S1 with high torque is suited for even heavy-duty machining. It moves along the A-axis allowing rotations from 0° to 180°, so the profile can be machined on three faces without having to reposition it. Comet X has a 10-place tool magazine, on board carriage X-axis, that can hold an angular machining head and a blade with a maximum diameter of 180 mm, for machining on the 5 sides of the profile. The mobile worktable facilitates the workpiece loading/unloading operation fully ergonomically, and significantly increases the machinable section on the X-axis.


Touchscreen interface The command and control unit, with suspended interface, allows the operator to view the screen from any position, thanks to the possibility of rotating the monitor on its vertical axis. The operator interface has a 24� touchscreen display in 16:9 format, portrait mode, with all the USB connections necessary to interface with a remote PC and NC. An operator panel and mouse, in addition to the set up for connecting a barcode reader, remote operator panel and front USB port, complete the equipment.

TOUCH THE FUTURE


HUMAN SIDE Power and flexibility of the electrospindle The 7 kW electrospindle in S1 with high torque is suited for heavy duty machining. It moves along the A-axis allowing rotations from 0° to 180°, so the profile can be machined on 3 faces without being repositioned. It can be used on certain types of extruded steel and on aluminium profiles, thanks to the availability of a lubrication system, settable by software, whose twin tank allows the use of both minimal diffusion oil and oil emulsion mist.

COMET X4

A

B

C

D

X1

Y1

Z1

X2

Y2

Z2

mm

45

102

232

45,5

4000

300

250

4000

210

250

COMET X6

A

B

C

D

X1

Y1

Z1

X2

Y2

Z2

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

Single mode

45

102

232

45,5

7700

300

250

7700

210

250

Double mode

45

102

232

45,5

3440

300

250

3440

210

250

COMET X6HP

A

B

C

D

X1

Y1

Z1

X2

Y2

Z2

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

Single mode

45

102

232

45,5

7320

300

250

7320

210

250

Double mode

45

102

232

45,5

3250

300

250

3250

210

250


LIGHTS AND COLOURS


Glass protection Design and function come together in pursuit of the operator’s health and safety. The care and attention given to researching the materials confirm this. Safe, perfect, resistant, long-lasting. These are the advantages of choosing glass for protecting the new Comet machining centres. Machine glass cuts operate to flag machine statuses, thanks to a light colour interface. The whole visor slides downwards, thus making it easier to load the pieces; additionally, the ends feature an aluminium guard that acts as a support plane if needed.


ALWAYS NEAR Tool magazine The tool holder magazine is integrated in the X-axis, placed in the lower section and in a recessed position with respect to the electrospindle, and allows reducing the time for the tool change operation. Particularly useful for machining the head and end of the extruded profile, it enables avoiding the stroke to reach the magazine. The magazine can contain up to 10 tool holders with respective tools, that can be configured at the operator’s discretion. It can hold an angular machining head and a blade with a maximum diameter of 180 mm, for machining on the 5 sides of the profile. Each position of the tool holder is provided with a sensor detecting the correct cone position.


Foldaway tunnel Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.

GHOST TUNNEL


WHAT YOU WANT Automatic clamps In various Comet X models, profile clamping is ensured by pneumatic clamps with automatic positioning. The clamps table moves along the Y-axis to facilitate profile loading and increase the working field. Positioning heights are always managed by NC, which means significantly reduced handling times, precise positioning, and zero errors due to manual intervention. In the Comet X4 model, the carriage hooks each clamps unit and moves it to the position established by control.


HP version In the Comet X6HP model, the machine has two additional H and P axes with numerical control that handle two independent systems that can position the clamps in concurrent time, and position the workpiece reference stops along the whole length of the machine. This allows operating in dynamic multi-piece double operation. The machine therefore has two operation modes: a single work area for bars up to 7,7 m long, or two independent work areas in double operation.


unit of measurement AXIS TRAVEL X AXIS

mm

Y AXIS

mm

Z AXIS

mm

A AXIS

°

H AXIS

mm

P AXIS

mm

POSITIONING SPEED X AXIS

m/min

Y AXIS

m/min

Z AXIS

m/min

A AXIS

°/min

H AXIS

m/min

P AXIS

m/min

ELECTROSPINDLE kW

Max. power rating in S1

revs/min

Max. speed Toolholder taper Automatic toolholder engagemen Cooling through heat exchanger MACHINABLE FACES With direct tool (top face and side faces) With angular head (front faces) With blade tool (top face, side faces and front faces) TAPPING CAPACITY (screw tap in aluminium, through hole) With length compensation Rigid tapping (optional) AUTOMATIC TOOL MAGAZINE ON BOARD THE MACHINE Maximum Number of tools in tool magazine Max. number of angle machining heads loadable in tool magazine

mm

Max. blade diameter loadable in magazine PROFILE POSITIONING Workpiece reference stops with pneumatic movement Automatic workpiece reference stop positioning through H and P independent axes WORKPIECE CLAMPING Standard number of vices Max. number of vices Automatic vice positioning through X AXIS Automatic vice and workpiece reference stop positioning through H and P independent axes MACHINING UNIT Cantilever structure Double tank with provision for handling different lubricants Coolant system with minimum quantity coolant Automatic lubrication system of the operating head CONTROL UNIT Remote push button MG PILOT Wi-Fi connection kit HMI industrial PC (standard) CNC-PC with Processor I3 (dual core) CNC-PC with Processor I7 (quad-core) Graphic colour display LCD-TFT, 24” touch screen RAM memory 4 Gbyte 64 Gbyte SSD USB port Lan card RJ45 SOFTWARE Microsoft® Windows® Embedded bidiCAM H DRILL

included

o

optional

-

not available


COMET X4

COMET X6

COMET X6HP

4250

7970

7600

420

420

420

430

430

430

0° ÷ 180°

0° ÷ 180°

0° ÷ 180°

-

-

3900

-

-

3899

120

120

120

25

25

25

25

25

25

4500

4500

4500

-

-

66

-

-

66

7

7

7

16500

16500

16500

HSK-50F

HSK-50F

HSK-50F

3

3

3

2

2

2

1+2+2

1+2+2

1+2+2

M8

M8

M8

M10

M10

M10

10

10

10

1

1

1

Ø = 180

Ø = 180

Ø = 180

2

2

-

-

2

4

6

8

6

12

12

-

-

-

o

o

o

o

o

o

o


The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products. Please contact the sales personnel if you have any queries.

w w w. e m m e g i . c o m Š Voilà p holding S.p.A. - July 2019 - All rights reserved - GB 720440.01

Profile for Emmegi Group

Comet X GB  

Comet X GB  

Profile for emmegi