Engine body, general overhaul
Crankshaft, removal 70. Remove the bearing caps. (Rear thrust bearing caps have been removed together with the oil pump.)
71. Carefully lift out the crankshaft. NOTE: The crankshaft weighs about 80 kg (180 lbs). 72. Before engine block is washed, plugs, screw and remaining brackets should be removed. 73. Clean contact surfaces on parts to be reinstalled.
Crankshaft, refitting 74. Inspect the crankshaft, see �Crankshaft, inspection� 75. Check the oil channels of crankshaft and its contact surfaces with the bearing shells, cylinder block and caps. 76. Install new main bearing shells. 77. Put the bearing shells in their respective positions in the cylinder block and caps. Make sure that the bearing shells and caps are undamaged. NOTE: Make sure that the upper bearing shells to be installed into the cylinder block are equipped with oil holes.
60